Database Users

[Q] How do I stop ATT update?

First off I apologize if this is in the wrong section or has been asked before, I couldn't really find the answer I'm looking for.
So I have my S4 (4.2.2 if it matters) rooted and TWRP recovery loaded on it. I was getting the ATT update message and I kept hitting ignore or remind me latter, however I noticed last night it starts to try to install and restart without giving me an option to cancel it. I quickly remove the battery to prevent my phone from updating.
My question is, how do I stop this update when I turn my phone back on? I don't want it to update the firmware and lock my boot loader. Or am I making a big deal over nothing?
Thanks in advance

Google how to stop ota i337 xda
You're not over reacting

jd1639 said:
Google how to stop ota i337 xda
You're not over reacting
Click to expand...
Click to collapse
Thanks so much.
Just one more think, I just want to make sure that when I turn my phone back on that the update won't finish installing (it was in the process of installing when I shut it off).
Thanks again for all the help.

I'm assuming that u have MDB/MDL firmware. ......Take your Att sim card out. ... u need to root your phone. ... install Titanium back up and go to Att software update app ....back up first just incase u need it to return to att and then uninstall it...... that's should stop it from OTA update
SWYPED_FROM_S4_MF3_REDVENOM

Yep, you're going to want to root and then rename or freeze those files, you found in the Google search. That will stop the update

Taking just the SIM out at this point won't help. Only way to completely stop it now since it was installing is to Odin back to MDL and start the root process.
Sent from my SAMSUNG-SGH-I337 using XDA Premium 4 mobile app
---------- Post added at 01:34 PM ---------- Previous post was at 01:34 PM ----------
Hopefully it didn't already blow the qfuse.
Sent from my SAMSUNG-SGH-I337 using XDA Premium 4 mobile app

ted77usa said:
I'm assuming that u have MDB/MDL firmware. ......Take your Att sim card out. ... u need to root your phone. ... install Titanium back up and go to Att software update app ....back up first just incase u need it to return to att and then uninstall it...... that's should stop it from OTA update
SWYPED_FROM_S4_MF3_REDVENOM
Click to expand...
Click to collapse
So not to keep asking the same question, when the sim card is out of the phone, will that prevent the update from installing?
Also to clarify, I've already rooted my phone and installed TWRP recovery. Again at this point I just want to make sure that when I turn my phone on the update isn't going to automatically finish installing before I can block the app/files
Again, thanks so much for the help, can't wait to get a rom installed and start enjoying the awesomeness

I'd follow graydiggy suggestion. Don't turn it on except to go into download mode. Flash the mdl firmware, then root again and freeze the update apps or install a custom Rom

I could be wrong but I believe the update won't apply since the stock recovery has been replaced with a custom recovery . If I am wrong Im sure somone will come in and correct this statement .

SouthernEvo said:
I could be wrong but I believe the update won't apply since the stock recovery has been replaced with a custom recovery . If I am wrong Im sure somone will come in and correct this statement .
Click to expand...
Click to collapse
Won't matter

If you have a custom recovery, the update should fail the install with an error 7. However, I would still completely start from scratch by using Odin to get a clean slate without an update. You could actually use Kies and do the emergency restore. Whatever you do, do not boot the phone into the OS until it has been completely wiped by either Odin or Kies. Only download mode.
Sent from my SAMSUNG-SGH-I337 using XDA Premium 4 mobile app

boot into recovery and in twrp manually go erase the update.zip from cache/fota. Then wipe cache before rebooting. That, or flash the PIT file. I posted directions on how to extract the stock signed PIT file but you'll probably need someone to extract one for you since you dont want to boot to Android yet.
Sent from my SCH-I545 using XDA Premium 4 mobile app

Oh yeah. TWRP has a file manager. Delete the update and then boot the OS and use Titanium Backup to delete the OTA stuff
Sent from my SAMSUNG-SGH-I337 using XDA Premium 4 mobile app

Surge1223 said:
boot into recovery and in twrp manually go erase the update.zip from cache/fota. Then wipe cache before rebooting. That, or flash the PIT file. I posted directions on how to extract the stock signed PIT file but you'll probably need someone to extract one for you since you dont want to boot to Android yet.
Sent from my SCH-I545 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
graydiggy said:
Oh yeah. TWRP has a file manager. Delete the update and then boot the OS and use Titanium Backup to delete the OTA stuff
Sent from my SAMSUNG-SGH-I337 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Sweet so by doing this I don't have to Odin back to stock?

Essentially.
Sent from my SAMSUNG-SGH-I337 using XDA Premium 4 mobile app

Thank you everyone so much for your help. I seem to have got it all sorted out, don't see any changes to the baseband version and still have root access.
Thanks again.

the_windrammer said:
Thank you everyone so much for your help. I seem to have got it all sorted out, don't see any changes to the baseband version and still have root access.
Thanks again.
Click to expand...
Click to collapse
Glad you got it worked out. You had the A team, surge and graydiggy

a different approach w/ i537 jb4.2.2
on topic but with different variables... I'm not finding a detailed post on the best way to stop ATT update immediately after rooting the i537 jb4.2.2
Can someone link me here please?
Not sure if I should just delete the app or go the root explorer route and delete the knox file (not sure if that is the only file to remove either?)
I have compiled all my notes at: freehelpinghands.wordpress DOT com/2013/12/15/best-way-to-unlock-root-a-new-phone/
and the answer to my question above will likely be answered by the time this is being read.

[Q] [G900H] Partial rooting problem - Halfway root

Hi all, thank you for reading this. I'm sure I'm not the only one here that has this problem;
I've got a Samsung Galaxy S5 SM-G900H and I've tried countless times to root it. It rooted halfway. How? Well, being a n00b in a developer's forum is really tough but I'll try to exemplify:
So I succesfully rooted my phone via Philz CWM to later install Chainfire's Root App from Google Play store. But I can't run "Game Killer" without it posting "Root access needed" when I THOUGHT I rooted my phone. So I downloaded Root Checker Pro and then I kinda understood why.
Has this happened to anyone before? I've never had this rooting problem (used to own a Galaxy S4 before this one and a Samsung S2 before that one)..
PLEASE HELP!
Oh, and I can't use CF-Auto-Root method because it get's stuck at CACHE and I can't make it past there (EVEN if I change the Odin versions). My guess is that it's got something to do with Philz being there. I dunno..
HOW CAN I COMPLETELY ROOT MY BELOVED S5 G900H?
Thank you in advance!

Bump?
Sent from my SM-G900H using XDA Premium 4 mobile app

RBucci said:
I can't run "Game Killer" without it posting "Root access needed" when I THOUGHT I rooted my phone. So I downloaded Root Checker Pro and then I kinda understood why.
Has this happened to anyone before?
Click to expand...
Click to collapse
Yes and yes. Incomplete roots are a common issue and happen to many people. It can happen because you missed a step, because the rooting method is out of date or perhaps some app is interfering. You simply need to root again.
It would probably suffice to update SuperSU and update or install busybox. But if you prefer, uninstall SuperSU, then run your root again. If you run into difficulties, then look for advice on how to disable Knox, use one of the newer rooting methods or flash a stock firmware image and start from scratch.

RBucci said:
Oh, and I can't use CF-Auto-Root method because it get's stuck at CACHE and I can't make it past there (EVEN if I change the Odin versions). My guess is that it's got something to do with Philz being there. I dunno..
Click to expand...
Click to collapse
2 ways:
1) This has been noted before. If you get stuck on the cache during the flash process, you should remove battery + sim + sd and re insert them and flash again.
2) Not being able to flash with Philz usually is caused because of the recovery version. Since you have G900H it could very be that problem, so if you didn't try my advice from above, I would try to use a different recovery (CWM / TWRP).

Thank you YMatrix for taking the time to respond. I will reply as soon as I'm able to do so and post a reply with the steps for the successful alternatives.
Sent from my SM-G900H using XDA Premium 4 mobile app

And fffft for the quick response! Thank you both. I will post feedback ASAP.
Sent from my SM-G900H using XDA Premium 4 mobile app

Nope. Did not work. I made a full wipe, formatted system, formatted data, formatted media, formatted cache, made a full full wipe of everything, flashed original unbranded firmware and then followed the CF-AUTOROOT method to encounter the same fail...
Sent from my SM-G900H using XDA Premium 4 mobile app

Is there a manual way that I can copy the su file into system and set the setuid permissions?
I'm doing my best and tried everything and nothing and no way seems to grant me core root like it's supposed to..
Sent from my SM-G900H using XDA Premium 4 mobile app

Just an idea,, why not unroot then use towel root? I didn't need to go to all that trouble to root my device. Just a couple of clicks with towelroot app.

Because when I attempt to root with Towelroot it says that my device is not currently supported..
I've tried almost every combination/steps.. It gets rooted but it doesn't root the core.. I don't know how to put it in words. N00b disadvantages..
Sent from my SM-G900H using XDA Premium 4 mobile app

Hmm in that case I would post a message on the xda-dev forum. Oh wait
Sorry I'm not much help here. I'm not sure why my Australian S5 is supported and yours is not (towelroot).

Well, I'm not sure either. One very strange thing as well is that in Terminal Emulator, when I type "whoami" it says unknown.
I still can't access full root.
I do, however, have SuperSU installed and working properly but it's like a fake root or something..
Sent from my SM-G900H using XDA Premium 4 mobile app

The result is still the same.. Help? Please?

Well RBucci, i'm with the exact same problem. thought semi-root, happenned to me before, with the S4 and S3, i ve simply fixed it, re rooting with another version of CF-AUTOROOT.
But now, there's no other version of it, for S5. i have the same varian (G900H) as you. CF-ROOT get stuck after writing Cache.img, and throwing "Write error".
please, let me know if you find a work around for it, i'll be doing the same.
i guess we have the same phone, i'm from argentina, probably we have the same variant of "H" version..
---------- Post added at 04:11 PM ---------- Previous post was at 04:06 PM ----------
Question, have you tried downloading busybox from market and trying to install it?
does it erease itself after rebooting?

Finally working full root!
as you asked here is what i've done.
put a sim card in the phone, (never put a simcard in the phone before), enter developers options, marked USB debbuging, unmarked verify potencial risky apps pushed by ADB (sorry if the translation isnt exact i have the phone in spanish) is right below USB Debuggin Option.
-turn off phone
-Remove SIMCARD
-Enter Download mode
-Flash via Odin 3.09 Chainfire CF-AUTOROOT for G900H
-and enjoy.
try it mate. it worked for me

here some screenshots, one checking root, another one checking busybox.

pelpa87 said:
Well RBucci, i'm with the exact same problem. thought semi-root, happenned to me before, with the S4 and S3, i ve simply fixed it, re rooting with another version of CF-AUTOROOT.
But now, there's no other version of it, for S5. i have the same varian (G900H) as you. CF-ROOT get stuck after writing Cache.img, and throwing "Write error".
please, let me know if you find a work around for it, i'll be doing the same.
i guess we have the same phone, i'm from argentina, probably we have the same variant of "H" version..
---------- Post added at 04:11 PM ---------- Previous post was at 04:06 PM ----------
Question, have you tried downloading busybox from market and trying to install it?
does it erease itself after rebooting?
Click to expand...
Click to collapse
pelpa87 said:
Finally working full root!
as you asked here is what i've done.
put a sim card in the phone, (never put a simcard in the phone before), enter developers options, marked USB debbuging, unmarked verify potencial risky apps pushed by ADB (sorry if the translation isnt exact i have the phone in spanish) is right below USB Debuggin Option.
-turn off phone
-Remove SIMCARD
-Enter Download mode
-Flash via Odin 3.09 Chainfire CF-AUTOROOT for G900H
-and enjoy.
try it mate. it worked for me
Click to expand...
Click to collapse
pelpa87 said:
here some screenshots, one checking root, another one checking busybox.
Click to expand...
Click to collapse
You're the man!
I'm going to delete everything (FULL WIPE) and reinstall stock firmware to test it from scratch. I'll let you know how it goes.
Hopefully I'll be posting back from a fully rooted phone.
Thanks, bro!

I had the same issue, got stuch on cache, so i turned it off, removed the battery, took the sim AND the sd card away, and tried the cf-autoroot again, it worked, have full root on the s5

OMG
I've found the problem !!!
Hi everyone
You have to use CF-Root with Odin 1.85 ! It works perfectly :laugh:
Samsung SM-G900H
A Panda French.

But, what about Towelroot?
http://forum.xda-developers.com/showthread.php?t=2783157
CF-Root will trip the Knox to 0x01!
Be the way if the knox is trip to 0x01
can I still go back to rom stock from samsung and still get OTA?
what about if i chace to ASOP non-stock rom can I still get back and keep the OTA?
The knox dons't block me to get OTA or flash back rom stock?
Thank you!

S5 Issues rooted with 4.4.4

My S5 is rooted on 4.4.4 and I've been having lots of issues.
1. Phone would restart randomly.
2. Random apps would close.
3. If I have an app open (for example, the Camera), it would stop.
4. Phone would randomly freeze and would restart or stay frozen. I'd then have to pull the battery.
Is anybody else having these issues and/or know how to fix this? It's getting really annoying and I obviously can't use my phone properly. This is why I sometimes think about just getting a bloody iphone. ha!

We need more info. Did you freeze/uninstall anything? Does it have SafeStrap installed? Custom rom? Xposed modules? Or anything else?

I did "turn off" some apps in System > Applications and I also uninstalled some bloatware apps I didn't want. I just installed SafeStrap, so the issue was occurring way before I installed that. I have no roms nor Xposed modules.

So...take us through the steps you took to update and root.

Well, I first unrooted the phone and then updated to 4.4.4 through Kies because it would not let me update directly from the phone. The issues that I mentioned above started occurring after the update. Anyway, I then used the rooting method in one of the xda posts and started from Step 3.

xazilizax said:
Well, I first unrooted the phone and then updated to 4.4.4 through Kies because it would not let me update directly from the phone. The issues that I mentioned above started occurring after the update. Anyway, I then used the rooting method in one of the xda posts and started from Step 3.
Click to expand...
Click to collapse
This is how I root. I flash the NI2 tar in odin and use the files and instructions here. If you have the option to factory reset in the settings menu before you first flash the tar do so. Works like a charm every time for me.

Misterxtc said:
This is how I root. I flash the NI2 tar in odin and use the files and instructions here. If you have the option to factory reset in the settings menu before you first flash the tar do so. Works like a charm every time for me.
Click to expand...
Click to collapse
Let me 2nd Misterxtc' s suggestion. I was just about to suggest you Odin back to stock and start over. This time, once you are rooted and have ss installed go and make a backup. Now if you bone it up deleting stuff you can start over on a good install. Little extra work up front saves a ton down the road.

So, I un-rooted my phone using ODIN back to 4.4.4 and I did a factory reset and cleared cache. I'm restoring my apps now and some of them are still stopping - "Unfortunately Google Play (or whatever other app) has stopped." Grrr! -----So the un-rooting process did not fix my issues. =(

xazilizax said:
So, I un-rooted my phone using ODIN back to 4.4.4 and I did a factory reset and cleared cache. I'm restoring my apps now and some of them are still stopping - "Unfortunately Google Play (or whatever other app) has stopped." Grrr! -----So the un-rooting process did not fix my issues. =(
Click to expand...
Click to collapse
That happens immediately after restoring apps. Have you rebooted the phone and still have the issue? have you cleared cache and dalvik since restoring?

I did everything. I did factory reset from the Recovery. I cleared cache. I even did factory reset after the phone started up and nothing. I noticed that when I was going through Setup the last time, random system or google apps were stopping. Right now, my phone isn't connected to my google acct and I didn't install any apps, except for this one app called 'App Info' and it shows my Knox Warranty Void is 0x0, so I'm definitely taking it to Verizon this afternoon. Hopefully, they can fix it.

xazilizax said:
I did everything. I did factory reset from the Recovery. I cleared cache. I even did factory reset after the phone started up and nothing. I noticed that when I was going through Setup the last time, random system or google apps were stopping. Right now, my phone isn't connected to my google acct and I didn't install any apps, except for this one app called 'App Info' and it shows my Knox Warranty Void is 0x0, so I'm definitely taking it to Verizon this afternoon. Hopefully, they can fix it.
Click to expand...
Click to collapse
Did you flash the kernel after you flashed the update?

Misterxtc said:
This is how I root. I flash the NI2 tar in odin and use the files and instructions here. If you have the option to factory reset in the settings menu before you first flash the tar do so. Works like a charm every time for me.
Click to expand...
Click to collapse
I am having similar issues to OP. I followed your guide to a T. Here is what problems I had. After installing and running tr.apk it said device not suppored. I then went to TR website and got v3 and 'made it rain', it said it was okay. After this step 7: Shutdown and reboot once more into download mode and flash NI2_stock_kernel.tar.md5 with Odin in the AP slot.
It just sits on the Samsung Galaxy S5 (powered by android) boot screen and I cannot complete step 8. Any thoughts? Thanks in advance.

xazilizax said:
I did everything. I did factory reset from the Recovery. I cleared cache. I even did factory reset after the phone started up and nothing. I noticed that when I was going through Setup the last time, random system or google apps were stopping. Right now, my phone isn't connected to my google acct and I didn't install any apps, except for this one app called 'App Info' and it shows my Knox Warranty Void is 0x0, so I'm definitely taking it to Verizon this afternoon. Hopefully, they can fix it.
Click to expand...
Click to collapse
did you check md5 on the download? i simply installed a 444 rom and then used odin to flash 444 firmware n i was good to go lol. you must have a bad dl somewhere or doing something wrong
Sent from my SM-G900V using XDA Free mobile app
---------- Post added at 06:36 PM ---------- Previous post was at 06:35 PM ----------
Berdistheword said:
I am having similar issues to OP. I followed your guide to a T. Here is what problems I had. After installing and running tr.apk it said device not suppored. I then went to TR website and got v3 and 'made it rain', it said it was okay. After this step 7: Shutdown and reboot once more into download mode and flash NI2_stock_kernel.tar.md5 with Odin in the AP slot.
It just sits on the Samsung Galaxy S5 (powered by android) boot screen and I cannot complete step 8. Any thoughts? Thanks in advance.
Click to expand...
Click to collapse
can you take a screen of your odin on the pc? do you have n e thing else ticked? do you have a pit file etc
Sent from my SM-G900V using XDA Free mobile app

Berdistheword said:
I am having similar issues to OP. I followed your guide to a T. Here is what problems I had. After installing and running tr.apk it said device not suppored. I then went to TR website and got v3 and 'made it rain', it said it was okay. After this step 7: Shutdown and reboot once more into download mode and flash NI2_stock_kernel.tar.md5 with Odin in the AP slot.
It just sits on the Samsung Galaxy S5 (powered by android) boot screen and I cannot complete step 8. Any thoughts? Thanks in advance.
Click to expand...
Click to collapse
It should be fine if you used the ni2 file from the root.zip file. It works for me as well as others but I've seen issues with new phones. I'm not sure why.

elliwigy said:
did you check md5 on the download? i simply installed a 444 rom and then used odin to flash 444 firmware n i was good to go lol. you must have a bad dl somewhere or doing something wrong
Sent from my SM-G900V using XDA Free mobile app
---------- Post added at 06:36 PM ---------- Previous post was at 06:35 PM ----------
can you take a screen of your odin on the pc? do you have n e thing else ticked? do you have a pit file etc
Sent from my SM-G900V using XDA Free mobile app
Click to expand...
Click to collapse
Good idea. I will re download and double check MD5. Here is a SS of Odin. Imgur url is this (wont let me post because noob) --> /tvRayDC.jpg
I'm basically trying to narrow down whether the rebooting is hardware or software related. I might just return to stock and get a refurb unit if I can't figure it out. It seems like the restarting occurs intermittently when the phone trys to use the signal. I had one random reboot when i was in Safestrap and am also seeing reboots in 4.4.2 NCG stock. So maybe modem related? Maybe I can try another Kernel?
<br>
Misterxtc said:
It should be fine if you used the ni2 file from the root.zip file. It works for me as well as others but I've seen issues with new phones. I'm not sure why.
Click to expand...
Click to collapse
Good to know. I will double check the MD5.

Berdistheword said:
Good idea. I will re download and double check MD5. Here is a SS of Odin. Imgur url is this (wont let me post because noob) --> /tvRayDC.jpg
I'm basically trying to narrow down whether the rebooting is hardware or software related. I might just return to stock and get a refurb unit if I can't figure it out. It seems like the restarting occurs intermittently when the phone trys to use the signal. I had one random reboot when i was in Safestrap and am also seeing reboots in 4.4.2 NCG stock. So maybe modem related? Maybe I can try another Kernel?
<br>
Good to know. I will double check the MD5.
Click to expand...
Click to collapse
You canalways download the NI2 full tar from here and then follow the Root NI2 directions. If towelroot doesn't work try this. I always factory reset the phone from the settings menu before I flash the tar.

Xposed frame work for marshmallow 6.0.1

Pls can anyone tell how to get xposed frame work for
Samsung Galaxy S7 edge running on adriod marshmallow
6.0.1 any help will be much appreciated, cheers

shyyist1114 said:
Pls can anyone tell how to get xposed frame work for
Samsung Galaxy S7 edge running on adriod marshmallow
6.0.1 any help will be much appreciated, cheers
Click to expand...
Click to collapse
Flash this file through recovery: xposed-v80.0-sdk23-arm64-custom-build-by-wanam-20160211.zip, wipe just cache and dalvik, reboot system and install xposedinstaller_3.0_alpha4.apk as a normal apk. Before doing anythink please put also this Uninstaller in your SD card in case something went wrong you could flash it through recovery to recover normal boot: xposed-uninstaller-20160211.zip
Sent From My SM-G928F via Tapa

I did exactly that but it resulted in a bootloop, only showing the Samsung logo...

thecompany said:
I did exactly that but it resulted in a bootloop, only showing the Samsung logo...
Click to expand...
Click to collapse
Did you have the xposed-uninstaller in your external or internal sd card? If so, flash it to recover your boot and exit from bootloop.
Sent From My SM-G928F via Tapa

thecompany said:
I did exactly that but it resulted in a bootloop, only showing the Samsung logo...
Click to expand...
Click to collapse
Not sure how you guys keep getting bootlooping
Sent from my SM-G935F using Tapatalk

I had a nandroid backup so I restored my rom that way. No idea what I could be doing wrong, just flashed it on a stock rooted rom with TWRP 3
Edit: I read your post again, now I noticed the part 'custom build'. Woops, I flashed the one from the original thread Im gonna try the other one and will post back

thecompany said:
I had a nandroid backup so I restored my rom that way. No idea what I could be doing wrong, just flashed it on a stock rooted rom with TWRP 3
Edit: I read your post again, now I noticed the part 'custom build'. Woops, I flashed the one from the original thread Im gonna try the other one and will post back
Click to expand...
Click to collapse
For sure its a "custom build" by wanam just for Samsung devices. There are others xposed files for others that wont work anymore on Samsungs devices.
Sent From My SM-G928F via Tapa

Well that worked But now im having the same problem as I was having with my sg6, certain apps stop working, here an example of the Horizon Go app (dutch live tv streamer) which gives classnotfoundexceptions: https://www.dropbox.com/s/43if3chvf3sdbga/Screenshot_20160329-072524.png?dl=0

Yea so here's a tip. Install LiveBoot. Enable the app. Install xposed and tell me what you see when you get stuck at the Samsung screen.
These 3 errors occur for me:
Rpmb Daemon failed to start
SveClient device start fail
Zygote fails to connect.
I'm using the SM-G935W8

anyone have gotten any problem with snapchat? i dont mean the login part.. i mean the taking photo in snapchat.. when i had xposed installed everytime i took a photo on snapchat i get forceclose.. anyone got this problem too?

What type of device is s7 edge is it x68 or arm 68 etc
Sent from my SM-G935F using XDA-Developers mobile app

Verizon compatible Roms???

Where are the download pages(Links) for the Roms? Where are the instructions? I wish XDA would go back to the way they were a couple 2-3 years ago. This site was great back then, now I can't find anything. When I do find something there is nothing with it or it is wrong. Please, someone help me to find the page that has the Custom Roms and Install Instructions...
I am on OF1, Rooted & Unlocked..... If that helps. I have Flashfire, TB (Which doesn't work right anymore.), Flashify, SuperSU, BusyBox, TWRP Manager on now. I have never worked with TWRP Manager nor Flashify so I am a newby to them.
Thanks.
GoNavyMike

Check this Rom
Music Life 5.1.1-N5-Port-Rom-Note-3

GoNavyMike said:
Where are the download pages(Links) for the Roms? Where are the instructions? I wish XDA would go back to the way they were a couple 2-3 years ago. This site was great back then, now I can't find anything. When I do find something there is nothing with it or it is wrong. Please, someone help me to find the page that has the Custom Roms and Install Instructions...
I am on OF1, Rooted & Unlocked..... If that helps. I have Flashfire, TB (Which doesn't work right anymore.), Flashify, SuperSU, BusyBox, TWRP Manager on now. I have never worked with TWRP Manager nor Flashify so I am a newby to them.
Thanks.
GoNavyMike
Click to expand...
Click to collapse
What's wrong with Titanium Backup? Is it giving you the insufficient storage notification?

TB
Yes it is. TB stops and gives me the insufficient space notification.
I'd also like to know how to get a custom Rom on now. I'm OF1, Rooted, Unlocked, TWRP(Which I don't know how to use), Flashify, FlashFire, SuperSU, BusyBox. I have tried Jasmine 6.1 about 8 times and it does not work on my phone. My phone is a Verizon Retail SM-N900V Samsung Galaxy Note 3.
Jjavitable22 said:
What's wrong with Titanium Backup? Is it giving you the insufficient storage notification?
Click to expand...
Click to collapse

GoNavyMike said:
Yes it is. TB stops and gives me the insufficient space notification.
I'd also like to know how to get a custom Rom on now. I'm OF1, Rooted, Unlocked, TWRP(Which I don't know how to use), Flashify, FlashFire, SuperSU, BusyBox. I have tried Jasmine 6.1 about 8 times and it does not work on my phone. My phone is a Verizon Retail SM-N900V Samsung Galaxy Note 3.
Click to expand...
Click to collapse
Yea I got TB to work by going into the settings in SuperSu and unchecking mount namespace separation. Im trying to figure out how to get a custom ROM on my phone as well. I got Jasmine to work but I want to try one of the new ones. At least get a new kernel flashed for Jasmine. Did you try and make a backup in TWRP yet?
---------- Post added at 04:25 PM ---------- Previous post was at 04:23 PM ----------
Jjavitable22 said:
Yea I got TB to work by going into the settings in SuperSu and unchecking mount namespace separation. Im trying to figure out how to get a custom ROM on my phone as well. I got Jasmine to work but I want to try one of the new ones. At least get a new kernel flashed for Jasmine. Did you try and make a backup in TWRP yet?
Click to expand...
Click to collapse
https://www.youtube.com/watch?v=vjxIrsfT2Lo&feature=youtu.be

I may be wrong, but I think the links to most of the ROMS you have seen have been deleted because they are not fully working as of yet.
Sent from my SM-N900V using XDA-Developers mobile app

Video.......
I've tried that video about 8 times to no avail. As for the backup on TWRP, no I haven't. I'm not familiar with TWRP so I'm leery as to using it.
Jjavitable22 said:
Yea I got TB to work by going into the settings in SuperSu and unchecking mount namespace separation. Im trying to figure out how to get a custom ROM on my phone as well. I got Jasmine to work but I want to try one of the new ones. At least get a new kernel flashed for Jasmine. Did you try and make a backup in TWRP yet?
---------- Post added at 04:25 PM ---------- Previous post was at 04:23 PM ----------
https://www.youtube.com/watch?v=vjxIrsfT2Lo&feature=youtu.be
Click to expand...
Click to collapse

I never got it to work either. I had to Odin back to stock unrooted and re-root. Then unlock, all over.
Sent from my SM-N900V using XDA-Developers mobile app

GoNavyMike said:
I've tried that video about 8 times to no avail. As for the backup on TWRP, no I haven't. I'm not familiar with TWRP so I'm leery as to using it.
Click to expand...
Click to collapse
I'm sorry man. Once you reboot into recovery TWRP will give you options. The backup process is fairly easy but could be confusing when it's your first time. I'll try and find an explanation video for you and let me find the process I used to get Jasmine to work. It was a lot easier than I thought it would be. I'll get back to you.

GoNavyMike said:
Yes it is. TB stops and gives me the insufficient space notification.
I'd also like to know how to get a custom Rom on now. I'm OF1, Rooted, Unlocked, TWRP(Which I don't know how to use), Flashify, FlashFire, SuperSU, BusyBox. I have tried Jasmine 6.1 about 8 times and it does not work on my phone. My phone is a Verizon Retail SM-N900V Samsung Galaxy Note 3.
Click to expand...
Click to collapse
I think I might know what it was. When I flashed Jasmine ROM I hadn't unlocked the bootloader yet. And I just flashed it with flash fire. There was no computer involved after I installed of1 update and rooted the phone. Make a backup and try it again. Make sure you don't have both flash fire and TWRP installed. And that you have super su instead of kingroot.

TWRP
I've got FlashFire and TWRP both on and it seems to be fine. I went into recovery and did a backup with TWRP and it seems fine. I would just like to get a Custom Rom to work on here now. I use to run them all of the time before 4.4.3 came out. I finally got the TB back working and saving but it takes a very long time to run now.
Jjavitable22 said:
I think I might know what it was. When I flashed Jasmine ROM I hadn't unlocked the bootloader yet. And I just flashed it with flash fire. There was no computer involved after I installed of1 update and rooted the phone. Make a backup and try it again. Make sure you don't have both flash fire and TWRP installed. And that you have super su instead of kingroot.
Click to expand...
Click to collapse

Don't use that video its for a method that was used before the unlocked bootloader....
You obviously have never owned a d1 or anything else you could flash a ROM and such with... There is a tread called working vzw ROMs. You really need to figure out how to use twrp recovery not those apps you have. If you installed recovery use it. If not install flashify and choose the recovery for n900 4.4its the top one... Its all in a tread do the work and look.
http://forum.xda-developers.com/showthread.php?t=3359370
Read it
Sent from my SM-N900V using Tapatalk

GoNavyMike said:
I've got FlashFire and TWRP both on and it seems to be fine. I went into recovery and did a backup with TWRP and it seems fine. I would just like to get a Custom Rom to work on here now. I use to run them all of the time before 4.4.3 came out. I finally got the TB back working and saving but it takes a very long time to run now.
Click to expand...
Click to collapse
Try this ROM.. It's working good.
http://forum.xda-developers.com/showthread.php?t=3364382
Sent from my SM-N900V using XDA-Developers mobile app

knoxrandall said:
Try this ROM.. It's working good.
http://forum.xda-developers.com/showthread.php?t=3364382
Sent from my SM-N900V using XDA-Developers mobile app
Click to expand...
Click to collapse
i agree
working great on my vzw note 3 with non-verizon sim but still a cdma sim card
working good