Related
The purpose of this thread is to have all information regarding the Weloop Tommy, gathered, fresh and to the point.
(i am not affiliated with Weloop)
Please read both post number 1, 2 and search thread before asking questions thank you.
FAQ
Q:What is the latest firmware?
[Release] black watch v3.19 firmware update notifications [Copy link]
This update to the firmware update, the client does not update the current firmware version v3.18 firmware watches friends can try to use the old client detects the firmware update.
Update:
Solve watches restart, restore factory settings watches language will change.
Download Link:
iOS client 2.079: http://fir.im/iosobt
Android client 1.29.3702b: http://fir.im/andobt
Unofficial file archive of WeLoop Tommy. APK-Files with ending "b" are BETA http://www.wtf.li/
Q: When is the next app update
A: Weloop v. 3.0 will be released as closed beta 7the of March 2015 we don't know when there will be an open english release....
the extensive update 3.0 have,
better health monitoring
profiles
sleep monitoring
more alarms weekdays/weekend
and more.
(see attached pictures for app version 3.0 UI improvements
Q: What does the settings do?
- Backlight
24H: Backligth always turns on when button is pressed
Nite: Backligth turns on when button is pressed at night time (from 17–8)
Off: Backligth Always Off
- Motion
24H: Motion detection always on (backlight turns on when motion is detected)
Nite: Motion detection on at night time (from 17-8)
Off: Motion detection Off
- Night
On: Notification vibration disabled at night (from 23–8)
Off: Notification enabled at night
- O Clock
On: every whole hour the watch will vibrate. 12'O'clock etc.
Off: Off
- Fitness
On: Fitness functionality on
Off: Off
- Language
Chinese
English
- Anti Loss
On: Alarm when Phone is out of BT range
Off: Off
Q: Is there Cyrillic support
A: Yes
Q: The GoClever Ecos Chronos is the same watch right?
A: Yes it is on the hardware side, and you can with a "hack" install the firmware from the ECOS on the Tommy. (see next post for How to.!)
Awesome Weloop Review by VECTRON
http://forum.xda-developers.com/smartwatch/other-smartwatches/weloop-tommy-smartwatch-looks-best-t2864444
Troubleshooting
Q: i can not update my watch/its stuck/acting weird
Have you tried to reset the watch? there are 3 ways to do it
Restart watch from app. under update there is a restart button (it says reset but it restarts and keeps all your settings)
Reset from watch (Last menu point, this resets everything)
Hard reset (connect charge cable and press up and down button to reset)
Force OTA update:
Connect your watch to the charger. (watch must be charging)
Press all 3 buttons on the side simultaneously
Release the 2 side buttons, and keep the middle button pressed until you get the upgrade connecting display. (this might take some seconds)
Delete connection from phone
Connect and pair from app and upgrade
If you are on an Android device and it cannot connect, try an ios device, and vice versa
Q: The watch keeps switching back to chinese
More people have experienced that if the language is non english the watch will reset to chinese. Changing the phone OS to english stops the watch from switching to Chinese.
"Hacks"
How to make your own watchfaces:
user fcsabika has created a cool tool to create your own watchfaces
WeLoop Tommy Watchface Creator
attached are also some watchfaces made by user ruicoel filename "project rui.zip"
How To install GoClever Chronos ECO firmware on Weloop tommy (android only)
Download latest ECO firmware to phone
Disconnect Watch from phone, install ECO app
Go to “Check For Upgrade”
Tap on the middle circle six times
“Select a firmware file___ [Browse]”
Watch must be in forced OTA
Update watch.
You can flash between weloop and Goclever firmware (always be careful and follow instructions when flashing, i take no responsibility for bricked or exploding watches...)
To install weloop firnware, follow same instructions but use weloop app instead.
PROJECT OPEN FIRMWARE (please make sure you understand what this is and what it does before you attemtp to flash your watch)
Make a Weloop Tommy an open source sport watch that can be used without a mobile phone. Want to see a heart rate when running, cycling speed and cadence when cycling or number of laps while swimming? Help to make it possible! LINK
This project is divided into six phases:
Phase 1: find out and document watch pinout so it will be possible to communicate with screen, accelerometer and a flash memory from a custom firmware. DONE
Phase 2: write a custom firmware that will print sample text on a screen and expose a BLE service. Firmware will be flashed using SWD connector. DONE
Phase 3: make it possible to upload a custom firmware using OTA. This will save the waterproof case from destruction. DONE
Phase 4: update softdevice to the newest version (S110 8.0.0). Add possibility to switch to other softdevice (S120/S130) DONE
Phase 5: create a "terminal" firmware that allows to control what is displayed on a watch from an android/iOS app. IN PROGRESS
Phase 6: create a "standalone" firmware using S130 softdevice that can connect to external sensors (HRS, CSCS etc) without a phone. TODO
Go support developer Krzysiek
Goclever APK & FW file is attached to this post.
Latest Chronos ECO firmware 3.18
http://www.chronos.goclever.com:8080/fileServer/firmware/CHRONOSECO_V3.18_1.bin
Chronos ECO app (android)
https://play.google.com/store/apps/details?id=com.yf.foreign.goclever
Chronos ECO IOS app
https://itunes.apple.com/th/app/goclever-chronos-eco/id955306578?mt=8
BUGS & Annoyances
Notification not always deleted from phone when deleted on watch
Watch freezes sometimes
Being able to set the night time manually would be great (This can be done with the Goclever fw)
I'm no Dev so I'm not sure if this is of any help. While updating the watch I wanted to ensure my screen stayed on so I was tapping the screen.
If you tap the center of the percentage 6 times a pop up appears for you to select your update file. If you select browse it gives you access to a bunch of folders that appear to be inside the app or maybe the watch itself. I tried it several times and 6 is the magic number to make the option appear or disappear. It doesn't work if the watch isn't upgrading it's firmware.
Hope it can be of some use
skiiermike said:
I'm no Dev so I'm not sure if this is of any help. While updating the watch I wanted to ensure my screen stayed on so I was tapping the screen.
If you tap the center of the percentage 6 times a pop up appears for you to select your update file. If you select browse it gives you access to a bunch of folders that appear to be inside the app or maybe the watch itself. I tried it several times and 6 is the magic number to make the option appear or disappear. It doesn't work if the watch isn't upgrading it's firmware.
Hope it can be of some use
Click to expand...
Click to collapse
Thanks was this working on ios or android?,
will add to FAQ
taleboblen said:
Thanks was this working on ios or android?,
will add to FAQ
Click to expand...
Click to collapse
Android.
Thx
Thnx for the information, all working ok on my samsung s4, get the last version v3.18.
thx again
backlight
first of all thanks for this thread :good:
the nite backlight on my tommy watch actually comes on after 5PM (17:00)
i am from Slovakia, phone language is English, time zone CET (GMT+1)
interesting to see that yours turns on after 23:00
chsustik said:
first of all thanks for this thread :good:
the nite backlight on my tommy watch actually comes on after 5PM (17:00)
i am from Slovakia, phone language is English, time zone CET (GMT+1)
interesting to see that yours turns on after 23:00
Click to expand...
Click to collapse
Thanks for the update. i decrypted some of the information from the official Weloop FAQ. and yes i can now confirm that you are right. it turns on from 17-8 thanks again. I have now updated the FAQ with the correct time for all Night settings. :good:
Hello! Can someone make last CHRONOS ECO apk link to download? I cant download it from google play.
k0ra said:
Hello! Can someone make last CHRONOS ECO apk link to download? I cant download it from google play.
Click to expand...
Click to collapse
Hi , the chronos eco app is not compatible with the Weloop Tommy.
Brand new Tommy, it was paired with my phone but the connection was unstable, so I tried and forced an OTA update, watch is "Updating... 0 pct" but now the phone cannot detect the watch any more
Resetting the watch will restart it in ota update mode again!
Any help appreciated...
l.capriotti said:
Brand new Tommy, it was paired with my phone but the connection was unstable, so I tried and forced an OTA update, watch is "Updating... 0 pct" but now the phone cannot detect the watch any more
Resetting the watch will restart it in ota update mode again!
Any help appreciated...
Click to expand...
Click to collapse
Happened to me also, try to delete connection under bluetooth settings on device. now connect to to weloop and pair from Weloop app. keep trying and then go to update. again persistence is key. keep trying to update suddenly it will connect and update.
Whas the watch on latest firmware when you tried the force OTA?
are you on android or ios see if there is an updated App for you phone. see link on OP for beta APK.
let me know if it works.
watch was not on latest firmware, cant' remember which version it had.
I'm on android, also v1.24 does not help as check for updates does not go beyond "Checking version...".
k0ra said:
Hello! Can someone make last CHRONOS ECO apk link to download? I cant download it from google play.
Click to expand...
Click to collapse
l.capriotti said:
watch was not on latest firmware, cant' remember which version it had.
I'm on android, also v1.24 does not help as check for updates does not go beyond "Checking version...".
Click to expand...
Click to collapse
Try to update the Weloop app, latest is 1.27.
kill weloop app
delete bt connection from phone.
Open weloop app
conmect and update. Keep trying it can take a couple of times.
If all fails if possible try with other device and or ios device
update: I used an iphone and after a few retries I got it on v3.18.
back to android, but the pairing and the sync is problematic, to say the least, on my Huawei P7...
skiiermike said:
I'm no Dev so I'm not sure if this is of any help. While updating the watch I wanted to ensure my screen stayed on so I was tapping the screen.
If you tap the center of the percentage 6 times a pop up appears for you to select your update file. If you select browse it gives you access to a bunch of folders that appear to be inside the app or maybe the watch itself. I tried it several times and 6 is the magic number to make the option appear or disappear. It doesn't work if the watch isn't upgrading it's firmware.
Hope it can be of some use
Click to expand...
Click to collapse
If it's allowing you to select an update file, surely it is showing you the file system of the phone? Otherwise, you'd have no way to put a firmware update file there to select. My understanding would be this allows you to install a firmware update file stored on your phone, although I can't test this for sure as my Android phone is currently being repaired. There's some discussion about this here and that thread also contains a very small amount of analysis on the firmware file (VERY small amount, basically just analysing the name of the binary file), and another app that is apparently in some way related (link).
For what I can glean from the description of that app (seemingly made by the manufacturer of the SoC [System on a Chip] used in the WeLoop Tommy), it would appear that devices using the SoC (including the Tommy) have three firmwares: "bootloader", "soft device" and "application". The one embedded within the WeLoop app apk has the name "ble_app_ancs.bin"; ble stands for bluetooth low energy and ancs apparently stands for apple notification centre services. That leaves "app" - my guess would be this is the "application firmware". I'm not entirely sure the roles of the "bootloader" and "soft device" firmwares, but my guess is the one or other allows the device to get into "DFU mode" (or "OTA mode" as it seems to be referred to also), meaning in theory it should perhaps be possible to recover from any bricks arising from flashing dodgy application firmwares.
So potentially there is the option of reverse engineering the firmware (easily obtained from here: http://wtf.li/ - mirror of the APKs of the app [each of which contain a version of the firmware], and also one version of the firmware (the .bin file) separately), and creating a custom/modified one, while still being able to recover (because bootloader & soft device should be untouched). However, I have neither the expertise nor the time to look into that.
Without an Android phone with which to run either of the apps right now, I can't poke about too much (I only received my Tommy today), but once I get my phone back I'll maybe try and see if I can find anything else interesting. I'd like to see if I can figure out any way to get access to the watch faces, and see if they can be reverse engineered in any way, for example.
EDIT: Here is the output of strings run on the firmware binary from the latest version of the app on http://wtf.li : http://pastebin.com/X7TQXTb3 - nothing particularly interesting, a few filenames of the source files and a few other strings seen in the watch interface and stuff.
EDIT: A couple of URLs accessed by the app (seemingly related to updating):
http://au.umeng.com/api/check_app_update
http://www.yfsmart.com/weloopInterface/getFirmware.do
I can't see anything on these sites, my guess would be they need query strings parameters or something (not really sure what, some way of identifying that the app is accessing the site) to actually do anything.
EDIT: Hmm... http://www.yfsmart.com/weloopInterface/firmware_Upload.jsp - this site seems to allow you to upload a firmware. I wonder if it allows anyone to upload a firmware, which would then be downloaded by everyone when they check for updates? Certainly seems rather insecure...There's a bunch of other pages at http://www.yfsmart.com/weloopInterface/ haven't looked through them all yet.
EDIT: From what I can glean from this page ("SoftDevices" section under the "Development Tools and Software" tab), it seems like the "soft device" firmware is essentially a bit like a library, it's a precompiled binary supplied by Nordic (company that makes chip inside Tommy) which provides all the networking functions etc. which the "application" firmware uses. So:
Code:
application = front end UI (basically, the part WeLoop made)
soft device = "library" via which application can access hardware etc.
bootloader = initial part of firmware that loads SD + app firmwares
So the only really interesting part is probably the application firmware, the part that is in the WeLoop app. That's the code that actually "matters", the rest is just low level stuff. For actually changing the interface or whatever, modifying the app firmware would be all that's needed (for example, to increase the font size or the back light duration etc.).
SifJar said:
If it's allowing you to select an update file, surely it is showing you the file system of the phone? Otherwise, you'd have no way to put a firmware update file there to select. My understanding would be this allows you to install a firmware update file stored on your phone, although I can't test this for sure as my Android phone is currently being repaired. There's some discussion about this here and that thread also contains a very small amount of analysis on the firmware file (VERY small amount, basically just analysing the name of the binary file), and another app that is apparently in some way related (link).
For what I can glean from the description of that app (seemingly made by the manufacturer of the SoC [System on a Chip] used in the WeLoop Tommy), it would appear that devices using the SoC (including the Tommy) have three firmwares: "bootloader", "soft device" and "application". The one embedded within the WeLoop app apk has the name "ble_app_ancs.bin"; ble stands for bluetooth low energy and ancs apparently stands for apple notification centre services. That leaves "app" - my guess would be this is the "application firmware". I'm not entirely sure the roles of the "bootloader" and "soft device" firmwares, but my guess is the one or other allows the device to get into "DFU mode" (or "OTA mode" as it seems to be referred to also), meaning in theory it should perhaps be possible to recover from any bricks arising from flashing dodgy application firmwares.
So potentially there is the option of reverse engineering the firmware (easily obtained from here: http://wtf.li/ - mirror of the APKs of the app [each of which contain a version of the firmware], and also one version of the firmware (the .bin file) separately), and creating a custom/modified one, while still being able to recover (because bootloader & soft device should be untouched). However, I have neither the expertise nor the time to look into that.
Without an Android phone with which to run either of the apps right now, I can't poke about too much (I only received my Tommy today), but once I get my phone back I'll maybe try and see if I can find anything else interesting. I'd like to see if I can figure out any way to get access to the watch faces, and see if they can be reverse engineered in any way, for example.
EDIT: Here is the output of strings run on the firmware binary from the latest version of the app on http://wtf.li : http://pastebin.com/X7TQXTb3 - nothing particularly interesting, a few filenames of the source files and a few other strings seen in the watch interface and stuff.
EDIT: A couple of URLs accessed by the app (seemingly related to updating):
http://au.umeng.com/api/check_app_update
http://www.yfsmart.com/weloopInterface/getFirmware.do
I can't see anything on these sites, my guess would be they need query strings parameters or something (not really sure what, some way of identifying that the app is accessing the site) to actually do anything.
EDIT: Hmm... http://www.yfsmart.com/weloopInterface/firmware_Upload.jsp - this site seems to allow you to upload a firmware. I wonder if it allows anyone to upload a firmware, which would then be downloaded by everyone when they check for updates? Certainly seems rather insecure...There's a bunch of other pages at http://www.yfsmart.com/weloopInterface/ haven't looked through them all yet.
EDIT: From what I can glean from this page ("SoftDevices" section under the "Development Tools and Software" tab), it seems like the "soft device" firmware is essentially a bit like a library, it's a precompiled binary supplied by Nordic (company that makes chip inside Tommy) which provides all the networking functions etc. which the "application" firmware uses. So:
Code:
application = front end UI (basically, the part WeLoop made)
soft device = "library" via which application can access hardware etc.
bootloader = initial part of firmware that loads SD + app firmwares
So the only really interesting part is probably the application firmware, the part that is in the WeLoop app. That's the code that actually "matters", the rest is just low level stuff. For actually changing the interface or whatever, modifying the app firmware would be all that's needed (for example, to increase the font size or the back light duration etc.).
Click to expand...
Click to collapse
Thank you for the insights and findings its all very promising. :good:
On a sidenote:
I talked to one of my colleagues who is an engineer (i'm not a dev but a Designer), it seems like we in the office are playing around with the exact same SOC from NordicSemiconducter. we tried one of the apps from the google play store and it connects to the weloop(see attached pic). The app was called "nRF Master Control Panel", tried the other apps from NordicSC but no luck.
Hopefully there will be some sort of SDK with the v3.0 release on the 30th...
I got my Android phone back today, and haven't tinkered too much with Tommy just yet, but I can confirm that the file system you are browsing when you tap the percentage 5 times during an update is just the phone file system. It browses from root (i.e. /), rather than /sdcard or whatever, which is the standard, user accessible partition, hence there are some folders etc. you may not recognise, but amongst them will be "sdcard" which will take you to your regular storage (note: this is the case on phones without a micro SD card as well), where you could easily place an update file.
SifJar said:
I got my Android phone back today, and haven't tinkered too much with Tommy just yet, but I can confirm that the file system you are browsing when you tap the percentage 5 times during an update is just the phone file system. It browses from root (i.e. /), rather than /sdcard or whatever, which is the standard, user accessible partition, hence there are some folders etc. you may not recognise, but amongst them will be "sdcard" which will take you to your regular storage (note: this is the case on phones without a micro SD card as well), where you could easily place an update file.
Click to expand...
Click to collapse
Thanks for the confirmation. :good:
taleboblen said:
Troubleshooting
Force OTA update:
Connect your watch to the charger.
Press all 3 buttons on the side simultaneously
Release the 2 side buttons, and keep the middle button pressed until you get the upgrade connecting display. (this might take some seconds)
Delete connection from phone
Connect and pair from app and upgrade
If you are on an Android device try an ios device, and vice versa
Click to expand...
Click to collapse
I tried to use the OTA update to go from 3.17 to 3.18 (on Android) but Tommy stuck on screen "WeLoop ... Udating 0%", my smartphone (HTC M8) with its APP (latest version) dont find the Tommy and it remains bricked, how do I restart it? I tried all combinations, but remains on the screen, help me!
This is the US N (7.0) download link.
update.hicloud.com:8180/TDS/data/files/p3/s15/G1278/g104/v66891/f1/full/update.zip
Admin note: side-loading Beta N onto your Honor 8 is not supported by Honor and is outside of the official closed beta program, so if you break your phone, please don't call Honor...you are responsible
This is the changelog
Huawei designed EMUI 5.0 based on the newly released Android 7.0. The brand new EMUI 5.0 is inspired by the pure blues and whites of the Mediterranean. The interface is simple and smart, and EMUI 5.0 comes with enhanced, powerful performance that allows mobile phones to operate more smoothly. [Recommendations] • A cleaner, more interactive interface A brand new UI and effects inspired by the blues and whites of the Mediterranean. Simplified gestures, with most operations completed in 3 steps. EMUI 5.0 is more customizable, offering an optional Android App Drawer layout to users. • Enhanced features System operations are more fluid, allowing you to view a massive amount of images, browse websites, and perform searches faster. [Find out more] • Notifications An optimized design combines shortcuts with notifications to reduce the complexity of user actions. Touch and hold notifications to quickly block messages and notifications. Reminder cards are stacked to save space. • Three dimensional task management Tasks are stacked three dimensionally on the UI. Smooth gestures allow users to scroll through tasks by sliding up and down or dismiss tasks by swiping left or right. • Camera Camera now supports plug-in management. Infrequently used modes, like document readjustment, are presented as plug-ins to save internal memory on your phone. • Contacts Customization and sharing features added to name cards. The sharing feature allows quick sharing of contacts through Bluetooth, Facebook, and other methods. Added a scanner to the search box and lock screen, making it easier to add new contacts. • Email Improved how unread emails are tagged in the inbox. Users can now quickly delete, star, and mark emails as read or unread from the left sliding menu. • Settings Created a new suggested settings feature that recommends key settings based on the device's current status. Now, your phone is more capable of adjusting to your habits. Added a newly designed drawer feature. When this feature is enabled, it hides non-system preset apps in a drawer on the home screen, presenting you with a simple and tidy layout. Added a new drawer feature for settings. For settings that take two or more steps to set up, the user can now jump directly back to the main settings page with one gesture. Emergency information added. Users can add their names, blood type, and other information, so emergency services personnel can view this information from the lock screen. Added App twin, a feature that allows users to log in to two different accounts for third-party apps such as WhatsApp and Facebook. [Update notes] 1. EMUI 5.0 includes substantial changes to functionality, which may impact your usage habits. For more details, go to Huawei's consumer website at consumer.huawei.com, and check out our user guide. 2. This update will not erase your personal data, but we recommend that you back up any important data before updating. 3. The system will restart after the update. This will take about 10 minutes. Following the update, your home screen will automatically display the EMUI 5.0 theme. 4. If you encounter any issues while using EMUI 5.0, please document the issue and call our official helpline. Visit Huawei's consumer website for hotline information.
to install
1) create folder dload on external sdcard
2) extract UPDATE.APP from zip file and place in dload folder.
3) Turn phone off
4) Hold down both volume buttons while pressing the power button
Magic
Honor8Guy said:
This is the US N (7.0) download link.
update.hicloud.com:8180/TDS/data/files/p3/s15/G1278/g104/v66891/f1/full/update.zip
to install
1) create folder dload on external sdcard
2) extract UPDATE.APP from zip file and place in dload folder.
3) Now go to the phone settings–>update and press the menu button.
4) Now select choose Local update.
5) It will detect the update.app and installation process will start.
Click to expand...
Click to collapse
This is not the beta one right? (nfc and bl is working)?
This method is for locked bootloader, means flash without twrp
Just to confirm.
faizalotai said:
This is not the beta one right? (nfc and bl is working)?
This method is for locked bootloader, means flash without twrp
Just to confirm.
Click to expand...
Click to collapse
This is the beta, NFC is working for me as I was able to transfer pictures this way. BL ? bootloader?
I think he meant bluetooth. Is nfc and bluetooth working in the beta?
---------- Post added at 12:55 PM ---------- Previous post was at 12:19 PM ----------
I've tried installing this, Its still giving me incomaptible software error. i'm on the FRD-L04
Are you from the Honor Team.
How will this impact warranty?
Is it Beta?
What are the known issues?
runsoverfrogs said:
I think he meant bluetooth. Is nfc and bluetooth working in the beta?
---------- Post added at 12:55 PM ---------- Previous post was at 12:19 PM ----------
I've tried installing this, Its still giving me incomaptible software error. i'm on the FRD-L04
Click to expand...
Click to collapse
Sorry Bud I pulled that link right from the phone as it downloaded
Just an FYI for anyone trying to install this, on FRD-L04C567B162 I get an error "Software install failed! Incompatibility with current version".
NFC is working for me. Just made a purchase with Android Pay.
So is the update live for all beta testers? I sent my IMEI information over for the beta but never got a response back. (I had asked if we would be notified.)
Edit: Yep, it's live now. Woo!
b0xy said:
Just an FYI for anyone trying to install this, on FRD-L04C567B162 I get an error "Software install failed! Incompatibility with current version".
Click to expand...
Click to collapse
i guess we need to upgrade to previous version than the updater can upgrade to latest software..in this case the firmware must be on FRD-L04C567B316 ver.. If we look into this there are 2 more upgrade able version for our device..but these are only my thought because when i had this device for 1st time its upgrade twice to FRD-L04C567B162 version..
So the upgrade process required previous ver. of software...
edit:nah, still failed...lol
Notification Icons
Is anyone else not able to show notification icons anymore in the Status Bar? All I see in settings is the option to show a number or show nothing at all...
---------- Post added at 10:53 PM ---------- Previous post was at 10:46 PM ----------
I'm noticing on the beta that the camera now crashes 100% of the time, as does the Downloads app. Anyone else seeing this?
Camera app works fine for me. Downloads also opens without an issue. I took the OTA, and did a factory reset, though. I honestly haven't had any issues with it. Though I don't like the numbers notification thing. But other than that. everything else seems good on my end.
MrPandroid said:
Camera app works fine for me. Downloads also opens without an issue. I took the OTA, and did a factory reset, though. I honestly haven't had any issues with it. Though I don't like the numbers notification thing. But other than that. everything else seems good on my end.
Click to expand...
Click to collapse
I'll be honest I wouldn't have minded the number if it wasn't on every single notification. Would have been perfectly fine if it showed the number cause you had more than 3 or 4 notifications.
No luck here. I'm getting the error "Software install failed! Incompatibility with current version".
I'm curious if this is because of the different SOC.
I can see on CPU-Z that my unit is Kirin 955. Perhaps this is the reason.
Flashed through twrp and lost bt and NFC....read it, tested it anyways, and broke it.....
InkSlinger420 said:
Flashed through twrp and lost bt and NFC....read it, tested it anyways, and broke it.....
Click to expand...
Click to collapse
same here ol buddy lol ...now lets try and fix it hahaha
It's been found that if you are on B162 you will get a "Software install failed! Incompatibility with current version" error. So, what firmware do you need to be on before going to the beta N 7.0? I am on B162, and have not unlocked bootloader, flashed twrp, or rooted yet.
Iguanadon said:
same here ol buddy lol ...now lets try and fix it hahaha
Click to expand...
Click to collapse
Im working on it....gonna make me crazy if i dont..lol
I hope theres a fix for it. I read the the problem is with twrp that "it patches the files first then twrp removes it when it flashes the new system.img so therefor it's removed."
Read it here.
http://forum.xda-developers.com/honor-8/how-to/twrp-nougat-edition-t3504140
I am not the author of this ROM, I just share it for you!
Unofficial MIUI 8 builds for Huawei Honor 6 by Ry09iu from China.
You can go to see Ry09iu Blog to find new Builds: http://r-rom.com/2016/11/29/huawei_miui8_release/
UPDATE LOGS
Fix when connect to PC, it does not show the notification about the connect ways.
Fix when connect to PC with some software(which can manage your phone), it does hot restart.
Fix when you did not give some apps Position or other permissions, it does restart.
Fix when you open some apps, it does restart.
Fix when you open Theme Manager, it does force crash.
Fix sometimes it shows dark screen or you could not use status bar.(If still, try to open Power saving mode)
Fix every time you boot phone, it shows "SD card: click into the file manager"
Fix on the phone cover from the sensor screen flicker problems will happen
Fix phone click recording function prompts the device being used
Fix Xposed cannot use problem, has been integrated in the Settings - advanced Settings - Xposed framework option, please do not brush Xposed framework into any other version
Add desktop icon custom function layout, can be used with proper DPI values( MIUI Settings - advanced Settings)
Remove the ROOT administrative authority authorized application tedious confirmed many times
Remove MIUI system protection on the application of the parts of the system, users to delete Mi Market/System Update can boot your phone normally.
Optimizing the time into the boot speed for the first time, although still very long, but shorter than before
I am not the author of this ROM, I just share it for you!
HOW TO INSTALL MIUI 8?
1. Unlock your bootloader
2. Upgrade your phone to EMUI 4.0
3. Flash TWRP
4. Download this ROM
5. Download Google Apps if you need(Well, I write an app to download OpenGApps:http://coolapk.com/apk/com.jakting.opengapps)
6. Wipe
7. Flash ROM and GApps if you need
8. Reboot and Enjoy
I am not the author of this ROM, I just share it for you!
Ry09iu said that it will be the final build for Honor6 MIUI8.
Get MIUI 8
[7.2.26] https://mega.nz/#F!ds0jXS7S!zeQdMLeaSf5DGWE9nsrvaw (Uploaded by @fazi2015 )
http://pan.plyz.net/s/?u=1192430225&p=miui_hwH60_7.2.26_8t5j4ad29r_6.0.zip
[6.12.12] http://pan.plyz.net/s/?u=1192430225&p=miui_hwH60_6.12.12_plfiass0h8_6.0.zip
XDA:DevDB Information
MIUI8(Shared), ROM for the Honor 6, Honor 6 Plus
Contributors
hjthjthjt, ry09iu
ROM OS Version: 6.0.x Marshmallow
Based On: MIUI
Version Information
Status: Alpha
Created 2017-01-23
Last Updated 2017-03-18
Nice rom but sim bug makes it unable to make calls and hence this rom needs work to render it for daily usage. Looking forward to use it...
nishant1695 said:
Nice rom but sim bug makes it unable to make calls and hence this rom needs work to render it for daily usage. Looking forward to use it...
Click to expand...
Click to collapse
You can make a call or send sms normally.
It just shows that "it has no signal", but working normally!:laugh:
hjthjthjt said:
You can make a call or send sms normally.
It just shows that "it has no signal", but working normally!:laugh:
Click to expand...
Click to collapse
I'm sorry i might have been mistaken... But i tried for like 30 minutes but was unable to place a call.
How long have you been using this rom? How's the performance, battery life etc.? Are there any other bugs we should be aware of?
nishant1695 said:
I'm sorry i might have been mistaken... But i tried for like 30 minutes but was unable to place a call.
How long have you been using this rom? How's the performance, battery life etc.? Are there any other bugs we should be aware of?
Click to expand...
Click to collapse
I am now with EMUI because I could not flash xposed on MIUI8 now.(I could use phone without xposed:silly
But other Chinese users said that these bugs will not influence your daily use.
Wow, this is like a dream come true. Do you think this ROM will be updated to fix the bugs (especially random reboots)? I'm looking forward to use it but I would prefer if there was a little bit more stable version for daily usage. Oh and by the way, what happened? Custom ROM based on Android 6.0 for Honor 6? Did Huawei finally release ALL the sources?
As for the SIM icon - I read on his blog that this problem happens only for the Sim Card #1. I think (but I'm not sure) than in MIUI you can actually mark SIM cards as #1 or #2 in settings. Maybe this bug could be "fixed" by simply changing the settings and marking SIM card as #2?
finnenhawke said:
Wow, this is like a dream come true. Do you think this ROM will be updated to fix the bugs (especially random reboots)? I'm looking forward to use it but I would prefer if there was a little bit more stable version for daily usage. Oh and by the way, what happened? Custom ROM based on Android 6.0 for Honor 6? Did Huawei finally release ALL the sources?
As for the SIM icon - I read on his blog that this problem happens only for the Sim Card #1. I think (but I'm not sure) than in MIUI you can actually mark SIM cards as #1 or #2 in settings. Maybe this bug could be "fixed" by simply changing the settings and marking SIM card as #2?
Click to expand...
Click to collapse
right now, nothing is a big issue, other than signal display.. unless it's perfectly usable.. and signal issues are quite common in miui ports.. honor 5x had it too. but solved eventually
finnenhawke said:
Wow, this is like a dream come true. Do you think this ROM will be updated to fix the bugs (especially random reboots)? I'm looking forward to use it but I would prefer if there was a little bit more stable version for daily usage. Oh and by the way, what happened? Custom ROM based on Android 6.0 for Honor 6? Did Huawei finally release ALL the sources?
As for the SIM icon - I read on his blog that this problem happens only for the Sim Card #1. I think (but I'm not sure) than in MIUI you can actually mark SIM cards as #1 or #2 in settings. Maybe this bug could be "fixed" by simply changing the settings and marking SIM card as #2?
Click to expand...
Click to collapse
6.12.12 is the first built for Honor 6. Since Ry09iu has been made so many ROMs for H60, like FIUI, Mokee, Flyme4, Flyme5, MIUI6,MIUI7, IUNI OS, BaiduOS, Tencent TOS, and so on!
So I think He will not give up ..
The way to build MIUI8 for honor 6 is that MIUI has put out patchrom, which help developers to make roms easily.
(So it is possible to make a CM13.0(Well, now called Lineage OS) on the same way, But no one did it...)
As for the SIM icon...Well, some Honor 6 supports TWO SIM CARDS.
Thanks for your answers. I installed it right now (on top of official B860 with TWRP 3.0.2). Unfortunately I seem to have a problem with my IMEI and Baseband. Every few seconds pop-up window appears, telling me that my Device ID is unknown and it couldn't find IMEI, therefore some Mi Account options like MiCloud will be unavailable. In my Settings > About Phone it says that Baseband is also "Unknown". I'm doing another Wipe Data / Factory Reset and we'll see how it goes. Other than that the ROM seems to work OK, however there are some chinese apps.
EDIT
Nope, it's even worse now. After doing a wipe in TWRP, phone boots up and shows the starting configuration screen. I choose language, press Next and it shows up the message that there is no SIM card. I press "Skip" and phone instantly reboots. It's the same every time.
EDIT2
OK, I figured what was the problem at the first time - I flashed OpenGAPPS just after I flashed MIUI, which was not a good idea, I guess, and caused the issue described above. I formatted everything in TWRP and reinstalled MIUI only (no GAPPS). System started and had the original MIUI configuration (before it was different, probably due to the openGapps). There are, however, some bugs.
First of all, the configuration can't be finished in my language (Polish). At the step where you can choose to enable or disable "Find my phone" option it would just kind of hang (you can't finish that step). When I pressed "Next" it would just slide back to the same screen over and over again. I couldn't get past that step. However when I switched the language to English in first step, the configuration went fine. So if you have troubles and you use other language than Chinese / English, then I recommend you finish the first-time setup in English and later on switch the language to the desired one in the settings.
Problem with SIM card is quite annoying. Device doesn't recognize SIM card (even though it might actually work) and the icon is flashing all the time at the status bar. Because of that Mobile Data switch doesn't work. By default Mobile Data is enabled all the time and you can't turn it off with the switch nor with the settings (settings crash when you try to go to anything SIM related). The only way to switch on/off mobile data is by connecting the device with USB cable and using ADB commands:
adb shell
svc data disable <- disables Mobile Data
adb shell
svc data enable <- enables Mobile Data
There's also plenty of chinese apps (some chinese store + chinese VOD). The browser also has some chinese texts + some options have chinese left-overs (Mi Account Settings). The performance itself is quite good and it's a good start. However for daily usage it, in my opinion, needs a bit more polishing. Would be nice if we had someone here that could make a port for Western countries like the modified KangVIP (removing chinese apps, repairing western languages and so on). Unfortunately I don't have that kind of skill so the only thing that I can do is to report bugs I noticed
finnenhawke said:
Thanks for your answers. I installed it right now (on top of official B860 with TWRP 3.0.2). Unfortunately I seem to have a problem with my IMEI and Baseband. Every few seconds pop-up window appears, telling me that my Device ID is unknown and it couldn't find IMEI, therefore some Mi Account options like MiCloud will be unavailable. In my Settings > About Phone it says that Baseband is also "Unknown". I'm doing another Wipe Data / Factory Reset and we'll see how it goes. Other than that the ROM seems to work OK, however there are some chinese apps.
EDIT
Nope, it's even worse now. After doing a wipe in TWRP, phone boots up and shows the starting configuration screen. I choose language, press Next and it shows up the message that there is no SIM card. I press "Skip" and phone instantly reboots. It's the same every time.
EDIT2
OK, I figured what was the problem at the first time - I flashed OpenGAPPS just after I flashed MIUI, which was not a good idea, I guess, and caused the issue described above. I formatted everything in TWRP and reinstalled MIUI only (no GAPPS). System started and had the original MIUI configuration (before it was different, probably due to the openGapps). There are, however, some bugs.
First of all, the configuration can't be finished in my language (Polish). At the step where you can choose to enable or disable "Find my phone" option it would just kind of hang (you can't finish that step). When I pressed "Next" it would just slide back to the same screen over and over again. I couldn't get past that step. However when I switched the language to English in first step, the configuration went fine. So if you have troubles and you use other language than Chinese / English, then I recommend you finish the first-time setup in English and later on switch the language to the desired one in the settings.
Problem with SIM card is quite annoying. Device doesn't recognize SIM card (even though it might actually work) and the icon is flashing all the time at the status bar. Because of that Mobile Data switch doesn't work. By default Mobile Data is enabled all the time and you can't turn it off with the switch nor with the settings (settings crash when you try to go to anything SIM related). The only way to switch on/off mobile data is by connecting the device with USB cable and using ADB commands:
adb shell
svc data disable <- disables Mobile Data
adb shell
svc data enable <- enables Mobile Data
There's also plenty of chinese apps (some chinese store + chinese VOD). The browser also has some chinese texts + some options have chinese left-overs (Mi Account Settings). The performance itself is quite good and it's a good start. However for daily usage it, in my opinion, needs a bit more polishing. Would be nice if we had someone here that could make a port for Western countries like the modified KangVIP (removing chinese apps, repairing western languages and so on). Unfortunately I don't have that kind of skill so the only thing that I can do is to report bugs I noticed
Click to expand...
Click to collapse
THANKS FOR YOUR TEST!!!
I will try to report bugs you found to Ry09iu
(if He will listen to me. Some developers In China did not like answer users' questions because there are too many users trying to report their questions.)
In My test, I flash OpenGApps at the same time and it can start Into system. So I think it is not a bug or just OpenGApps's bug.
hjthjthjt said:
THANKS FOR YOUR TEST!!!
I will try to report bugs you found to Ry09iu
(if He will listen to me. Some developers In China did not like answer users' questions because there are too many users trying to report their questions.)
In My test, I flash OpenGApps at the same time and it can start Into system. So I think it is not a bug or just OpenGApps's bug.
Click to expand...
Click to collapse
Yeah, I normally do that on other phones too. I can flash CM13 and then flash OpenGapps just after that and it works perfectly fine. However for some reason it didn't work too good on my Honor 6 with this MIUI ROM (I'm using H60-L04 btw). Maybe there was some error during installation, hard to say. However whenever I started my phone it would show up "No SIM Card" screen immedietaly on top of MIUI Configuration. When I pressed "Skip" my phone automatically restarted. Weird - that probably would fix itself automatically after SIM Card bug is fixed in MIUI.
finnenhawke said:
Yeah, I normally do that on other phones too. I can flash CM13 and then flash OpenGapps just after that and it works perfectly fine. However for some reason it didn't work too good on my Honor 6 with this MIUI ROM (I'm using H60-L04 btw). Maybe there was some error during installation, hard to say. However whenever I started my phone it would show up "No SIM Card" screen immedietaly on top of MIUI Configuration. When I pressed "Skip" my phone automatically restarted. Weird - that probably would fix itself automatically after SIM Card bug is fixed in MIUI.
Click to expand...
Click to collapse
I use H60-L01 and OpenGApps seems works normally.
I uploaded it to mega all of you now easily download it miui8(7.2.26)
https://mega.nz/#F!ds0jXS7S!zeQdMLeaSf5DGWE9nsrvaw
fazi2015 said:
I uploaded it to mega all of you now easily download it miui8(7.2.26)
https://mega.nz/#F!ds0jXS7S!zeQdMLeaSf5DGWE9nsrvaw
Click to expand...
Click to collapse
Bro do u experience battery drainage?
@hjthjthjt could you request Ry09iu to fix the sim card bug in the next update?
omeir7 said:
Bro do u experience battery drainage?
Click to expand...
Click to collapse
Yes and some other bugs it's not for daily drive...
there are still bug?
wiizard91 said:
there are still bug?
Click to expand...
Click to collapse
yes but in development forum I create a post to request developer to fix it you also have to do so if you want it in stable conduction the developer of this rom is belong to China no other claim it but @Ale who can fix the bugs we have to request hin...
How do you go back to stock EMUI from this MIUI 8 ROM?
I have the Indian H60-L04 model, and I would like to know how to go back from this MIUI 8 ROM to the normal EMUI ROM.
Thanks for any help!
pranayshah said:
I have the Indian H60-L04 model, and I would like to know how to go back from this MIUI 8 ROM to the normal EMUI ROM.
Thanks for any help!
Click to expand...
Click to collapse
simply wipe all and flash rom..
Has anyone installed the Nougat update for the Asus Zenpad 10 Z300M?
Yes I do, what do you need to know?
I didn't know there was an update to Android 7 - I'm still hoping (probably in vain) for this tablet to be rooted.
fabfor said:
Yes I do, what do you need to know?
Click to expand...
Click to collapse
I was just wondering if there were any noticeable changes or any issues with it as of yet.
Thanks for the reply.
Is the update OTA or from a website?
odyseus said:
Is the update OTA or from a website?
Click to expand...
Click to collapse
OTA
---------- Post added at 14:19 ---------- Previous post was at 14:13 ----------
PeteSeiler2010 said:
I was just wondering if there were any noticeable changes or any issues with it as of yet.
Thanks for the reply.
Click to expand...
Click to collapse
Changes are those in the changelog. I haven't noticed any issues so far but multi user support isnt't there and I was hoping yes.
ASUS ZenPad 10 Android Nougat Changelog:
Update Google security patch
Remove redundant app shortcuts “Audio Wizard” “Splendid” “System update” and “Flashlight” from all apps menu
Remove ”PC Suite” (CD ROM)
Remove “Tap and hold to show menu” form Settings > ASUS customized settings > Touch key setting. Add “Tap and hold to activate Multi-window ” in Touch key setting
Quick Settings supports multiple pages , user can swipe left to right to see more quick settings if using more than 12. User can enter edit screen by tap the edit button on top right corner to determine which settings enabling or disabling
Default Tap and hold Recent apps key to activate Multi-window
Add “Game Genie”
ZenUI Keyboard added New Unicode code 9.0 emoji and skin tone.
The preloaded Holo Spiral, Bubbles, Black Hole, and Phase Beam live wallpapers are not compatible with Android N and will be removed after system update
Add bundled notifications switch. (Settings > Notification > Configure notifications.) When multiple notifications for a single app are received, they can be bundled together into a single group. This group can be expanded to see the individual messages
Add Lock screen wallpaper slideshow
Change wallpaper every time you wake up your device. And users can go to “Settings” -> “Lock screen” -> “Wallpaper slideshow settings” for setting
Update SMMI tool to SMMI_TEST_V5.1.74_CSC_L1L2
Support Unlock tool
Click to expand...
Click to collapse
Must be US update then as still running Android 6.x here in the UK
Odd .. haven't gotten it .. and I check every couple of days ..
It could be me, but it seems like my battery dies faster after having the update for a few days.
odyseus said:
Must be US update then as still running Android 6.x here in the UK
Click to expand...
Click to collapse
No, it's worldwide.
The official website have the link of the update, and you can apply it manually.
http://dlcdnet.asus.com/pub/ASUS/Ee...62.438207375.1494693050-1331990512.1494693046
Hello, pls can anybody help? I bough z300m from second hand, turn on it (not try log in to google) and on startup screen (language select) system ask me for update to nougat, i click OK, system updated, tablet restarted and i cant log into tablet (FRP).
I search for bypass z300m on nougat, but cant find it.
This procedure dont work for me (android 7.0)
So i need flash from fastboot, but i cant find flashtool for z300m (p00c), firmware i downloaded from official page.
Any solutions?
Thanks.
Edit. I cant turn on usb debugging in developer settings (system want log in for view all options in developer settings...)
Nougat
PeteSeiler2010 said:
Has anyone installed the Nougat update for the Asus Zenpad 10 Z300M?
Click to expand...
Click to collapse
I did the nougat OTA update yesterday,it took a few minutes to download,but it is working great !
macikcz said:
Hello, pls can anybody help? I bough z300m from second hand, turn on it (not try log in to google) and on startup screen (language select) system ask me for update to nougat, i click OK, system updated, tablet restarted and i cant log into tablet (FRP).
I search for bypass z300m on nougat, but cant find it.
This procedure dont work for me (android 7.0)
So i need flash from fastboot, but i cant find flashtool for z300m (p00c), firmware i downloaded from official page.
Any solutions?
Thanks.
Edit. I cant turn on usb debugging in developer settings (system want log in for view all options in developer settings...)
Click to expand...
Click to collapse
Bad news I'm afraid. You need the original login details used to setup the device when it was originally purchased other than that it's a long winded battle with ASUS to prove you didn't steal the device.
Good luck
After update the system reboots all the time when WiFi is ON.
If I turn OFF wifi - it works fine. No other solution...
root / multi-user
fabfor said:
OTA
---------- Post added at 14:19 ---------- Previous post was at 14:13 ----------
Changes are those in the changelog. I haven't noticed any issues so far but multi user support isnt't there and I was hoping yes.
Click to expand...
Click to collapse
There is a thread right after this listing when search for Z300M on XDA that claims TWRP and asus bootloader unlock tool (not necessary 2 get twrp) and was the reason I purchased this tablet. So far errors in everything in the OP with no responses and I hate to be paranoid but once I know, if not twice I have actuall run into "FAKE" threads on XDA in the 2-3 years being on here claiming root/twrp for a device with a small amount of chit chat, responses.... that was pure BS!
Anyhow, if you ever get root here is the fix for your multi-user issue, with es file explorer, or root explorer and editing the boot. file:
Enable Multi Window and Multi User Modes
If you have a rooted Marshmallow ROM (or Nougat), you can enable the 2 features above by editing the build.prop file found in /system/
For multi-window mode, change this entry in build.prop
ro.build.type=user
to -
ro.build.type=userdebug
To enable multi-user mode, add these 2 lines to the build.prop (anywhere, it doesn't matter)
fw.max_users=3
fw.show_multiuserui=1
Once you've made these changes, reboot the tablet.
To use multi-window mode, go to Settings, Developer options, and there will be a new menu item to switch this on or off.
To use multi-user, there will be a new option under Settings called Users.
If anyone seeing this has accomplished root on the Z300M 16GB wi-fi tablet, please let me know.....
thanks,
zach
ps of course, make sure you make a copy of the boot file to ext sd card or somewhere b4 just in case.... in the 15 times I have used this on 6.0, 7.0 lenovo & LG devices & 1 HTC... never had an issue BUT...
---------- Post added at 05:26 PM ---------- Previous post was at 05:19 PM ----------
odyseus said:
Must be US update then as still running Android 6.x here in the UK
Click to expand...
Click to collapse
Actually all of the updates for the Z300M taking it to 7.0 are for the WW SKU (world wide) tablets, as well one for Japan and 1 other.........
any sign of root?
Asking around since purchasing this tablet due to thread on here claiming twrp but its falling on its face and no response as of yet.....
zach
?????
coolbeans2016 said:
Anyhow, if you ever get root here is the fix for your multi-user issue, with es file explorer, or root explorer and editing the boot. file:
Click to expand...
Click to collapse
Thank you coolbeans2016, that's right the reason I am too desperately looking for a way to root: to apply that fix.
Btw, I really do not see the reason for Asus to disable a native function (multi-user) that is - to me - obvious for a tablet. (Maybe it eats resources? i.e. storage space)
problem is
fabfor said:
Thank you coolbeans2016, that's right the reason I am too desperately looking for a way to root: to apply that fix.
Btw, I really do not see the reason for Asus to disable a native function (multi-user) that is - to me - obvious for a tablet. (Maybe it eats resources? i.e. storage space)
Click to expand...
Click to collapse
Problem is the instructions for getting TWRP flashed or even just booted up on TWRP threaded for installation of SuperSU or Magisk is failing. I've been told I'm wrong and am just not reading or following the instructions correctly but on a VERY popular device there is NO ONE claiming $$PROFIT$$ on the thread! Even the ones claiming understanding of the thread are having complications but only have an average of 6 posts as jr users with no thanks feedback.... yet they have no questions regarding using the SP Flash Tool?!!!!! Strange to me!
I'm contacting the dev on the thread AGAIN to see if I can get a detailed set of instructions in JUST getting TWRP onto this tablet, or its useless to me......
He really thought I was calling his thread a false listing but straightened it out with him about the fact he references another such thread along the same lines for the Verizon Asus A380M, which EVERYONE knows has never been, probably never will be able to get a custome recovery, let alone root of any kind!!!!!!!!
Any info you come across, or if you have tried the thread I'm mentioning please let me know your errors encountered, any ideas how WE may be not taking the instructions correctly.
zach
Hi,
I couldn'tt find any update for Z300CL.
Does anyone know if such an update is available?
Could you post the link here?
Thanks a lot
I used usb ethernet dongle on android 6 and it worked , it showed ethernet icon instead wifi. But when on android 7 the dongle does not work, seems usb host function is disabled, I dont want to root my tabled is there any way to enable usb host support ?
********** ANNOUNCEMENT - Beta Enrollment without Banner (OPEN NOW - Nov 16,17) - Read More Here
INTRODUCTION - Hello all. Now Samsung wants us to go to Members app and keep looking for banner to sign up for Android 11, One UI 3 Beta . It went live October 27th, 10:20 PM EST, As fate would have it, i went to sleep early, i missed it and the banner refused to show up for me in the morning. Download was only showing up for people with unlocked variants on ATID firmware.
DISCLAIMER / NOTICE - Flashing is always risky. I am not responsible for anything that may happen to your device including but not limited to it turning against you, making you its slave and sucking you into the Matrix.
This post is a collection of wisdom, research and hard work of many people over many years across many forums and not just XDA. I will try to credit and link to their original posts.
TIP -Keep in Notice -This SHALL NOT Factory Reset Your Device or Format Data, it is still a good idea to Take Back Up - Just a Suggestion - Always have a latest Back Up
******** UPDATE - It seems ATT devices are getting wiped now if its CSC or the Sim remains to be tested.
i don't have ATT hence cant verify but in case you have an Unlocked device (N986U1) with ATT sim, then, removing sim and Changing the CSC to XAA/XAA/XAA before sideloading Beta is advisable.
PROBLEM STATEMENT - Missed the One UI 3.0, Android 11, Beta Sign up Banner in Members app or got the banner but didn't get the download and I really want it NOW.
Not sure if you want it now? - Find the BETA CHANGELOG HERE
GRAB YOURSELF A COFFEE / DRINK, because depending on where you at and how fast you/your internet speeds/your Machine is this may take anywhere between 7 to 45 MinsSOLUTION -
1. Pre-Requisites - Make sure Following Conditions are met before you start
You need a PC/Laptop along with your phone and USB Cable.
You need ADB installed, you can use ADB on Linux too - NOTE If your ADB Tools are not working, download my ADB Folder called platform-tools. Then extract it somewhere easy to remember/ find, like desktop
Remember the Location of the folder where you have ADB installed / Location of platform-tools- This is the location containing adb.exe file.
You may or may not need ADB/USB Drivers if any errors in ADB please Download Drivers from here and Install on your PC.
This following one step is relevant Only for flashing Beta 1
Use Odin to Flash Unlocked (SM-N986U1) ATID Firmware if you are not on that. Refer this thread to get your Firmware.
For changing Firmware from N986U to N986U1 and / or GUIDE TO FLASHING USING ODIN Refer This thread
______________________________________________________________________________________________________________________________________________________________
2. Now Download the relevant Beta File that you intend to flash - note that to Sideload Beta 2 you need to be on Beta 1 first. Mandotory Sequence = Beta 1>>Beta 2>>Beta 3 There is no skipping versions possible here.
BETA 1 (ZTGJ) Get the Beta1.zip file from here Thanks to @thatotherguy.. for the original zip.
BETA 2 (ZTK1) Get the Beta2.zip file from here
BETA 3 (ZTK9) Get the Beta3.zip file from here
______________________________________________________________________________________________________________________________________________________________
*************** Apply Update from SD card failed for me (Feel free to try that ) but here we will be using ADB Sideload Feature in Stock Recovery*************
HOW TO - Using ADB Sideload - Windows -The Process is Similar for Linux too
1. Copy the downloaded zip file to the ADB Folder (From Pre-Requisite step). ADB Folder is the folder containing ADB.exe it might be named differently for you (The one i have posted is called platform-tools)
2. Open Command Prompt Window as Admin.
3. Type in
Code:
cd Copy-paste the location of your ADB folder here
4. Connect the phone to the PC using USB Cable and Unlock it. Go to Developer Options and Switch on USB Debugging.
To turn on developer options go to Settings>>About Phone>>Software Information>> Then tap the build number 7 times - Developer options will appear at the bottom of Settings Menu
5. On your PC Type in Command Prompt
Code:
adb devices
6. Give Permission that appears on your phone and PC - I check the box Always Allow, you should do the same.
7. Now type the following and the phone will reboot to recovery.
Code:
adb reboot recovery
8. Once you see recovery on your phone Use Volume Keys to scroll down to Apply Update from ADB and press Power Button.
9. Now on your PC, Type the following in Command Prompt; this is just to be sure, it should show the device name with Sideload next to it.
Code:
adb devices
10. Type
Code:
adb sideload Beta1.zip
For Beta 2 use adb sideload beta2.zip Similarly For Beta 3 use adb sideload beta3.zip. Use whatever you have named the zip file. Most people use update.zip. The commands here are for the attached files in this post and their naming convention.
11. Wait for it to finish and Done
2nd (Second) BETA Is Out- How To Do this if you are not able to Enroll for Beta and or don't see update to download even after Enrolling
Second Beta should be flashed After Beta 1. Second Beta (ZTK1) can not be flashed unless you have Beta 1 (ZTJG).
To flash follow the same instructions as above only this time the prerequisite is you have to be on the 1st Beta. Download the 2nd Beta (ZTK1) Zip File to flash Here Thanks to @hayabusa1300cc for the FOTA Link.
3rd (Third) BETA Is Out- Nov 16, 2020 Do this if you are not able to Enroll for Beta and or don't see update to download even after Enrolling
Third Beta should be flashed After Beta 1>>Beta 2. Third Beta (ZTK9) can not be flashed unless you have Second Beta (ZTK1). Second Beta (ZTK1) can not be flashed unless you have Beta 1 (ZTJG).
To flash follow the same instructions as above only this time the prerequisite is you have to be on the 2nd Beta. Download the 3rd Beta (ZTK9) Zip File to flash Here
OPTIONAL THINGS TO DO POST UPDATE
If you want to enable RCS (In the Native SMS app) and Native Video calling (This feature is on Tmobile) have a look at this thread.
Check out this Guide Service Mode and CSC Guide/Enable LTE/5G Bands and Services/5G Low Band on U1 by @mellojosh
TROUBLESHOOTINGSome people might run into "cant read update.zip" error for that we need to make ADB Large address aware. Follow the Steps Here I use the Advanced mode as it shows the true false flags. - This wont happen if you use the ADB Tools provided by me above under the Pre-requisites section.
************** FOR FUTURE BETA OTA Questions / Bugs - Observations and some more info - Go Here ********Please dont ask questions without reading.
QUESTIONS, HELP & SUPPORT ?? - See if I am Online here on this Live Chat
If it helped HIT THAT THANKS BUTTON, what are you waiting for ? Cheers !!
Suggest you rename the title for which device it's for as it's not for every snapdragon (right?)
I get "adb: failed to read command: No error"
ekerbuddyeker said:
Suggest you rename the title for which device it's for as it's not for every snapdragon (right?)
Click to expand...
Click to collapse
I flashed on an Unlocked one so there is no way for me to tell if this can be flashed on N986U since so many people have flashed Unlocked firmware on the U devices using Odin (One confirmed guy flashed unlocked firmware on Verizon locked device and got the Beta banner) hence i think this will work for all Snapdragon devices. Give it a try and see. Just that before you try this make sure you are on ATID firmware.
d_ganggreen said:
I get "adb: failed to read command: No error"
Click to expand...
Click to collapse
Use a different USB Cable. A good quality one preferably. Also try changing USB port.
Can i install this on sm n 9860 version and does google pay and samsung pay beta work?
warriorvibhu said:
Use a different USB Cable. A good quality one preferably. Also try changing USB port.
Click to expand...
Click to collapse
Hmm, still getting same. Tried 3 cables including the one that came with the phone and both usb ports on my computer.
d_ganggreen said:
Hmm, still getting same. Tried 3 cables including the one that came with the phone and both usb ports on my computer.
Click to expand...
Click to collapse
Are you on ATID Firmware?
warriorvibhu said:
Are you on ATID Firmware?
Click to expand...
Click to collapse
I am, I odin flashed it a few weeks ago.
1gorelo said:
Can i install this on sm n 9860 version and does google pay and samsung pay beta work?
Click to expand...
Click to collapse
Too early in the morning to go out and test that. This is Beta and i have already encountered some bugs. So you have to be up for that.
Good Lock wont work, gesture navigation is buggy, you can not even apply wallpapers from the Galaxy Themes app.
Wallpaper Service on the other hand is greatly improved. Fingerprint sensor is much faster.
d_ganggreen said:
I am, I odin flashed it a few weeks ago.
Click to expand...
Click to collapse
My friend there are so many reasons why that error can happen. Sometimes you might have to change the ADB version. I am attaching the platform-tools i used. Extract this zip inside folder on desktop and try. If that doesnt work you might need to update ADb/Samsung drivers. Let us know if this works.
warriorvibhu said:
My friend there are so many reasons why that error can happen. Sometimes you might have to change the ADB version. I am attaching the platform-tools i used. Extract this zip inside folder on desktop and try. If that doesnt work you might need to update ADb/Samsung drivers. Let us know if this works.
Click to expand...
Click to collapse
Thank you! Whatever it was, that worked. I am able to get it running with your tools. I am running it now.
CHANGELOG - Android 11_OneUI 3 Beta
************ Notice: This changelog is compiled from various different resources online, verification of these features rests with the users **********
Code:
[COLOR="SeaGreen"][CENTER]BETA CHANGELOG[/CENTER][/COLOR]
[B]Home screen[/B]
– Touch and hold an app to add an associated widget
– Turn the screen off by double-tapping on an empty are of the Home screen. You can turn this on in Settings > Advanced features > Motion and gestures.
Lock screen
– Dynamic Lock screen now has more categories, and you can select more than one.
– Lock screen widgets are improved.
[B]Contacts, Phone and Call Background[/B]
– Added the ability to edit multiple linked contacts at one time.
– Added an option to help you quickly delete duplicate contacts.
– Enhanced the search experience.
– Extended the storage period of the Trash bin from 15 to 30 days.
– Added the ability to customize the call screen with your own pictures and videos.
[B]Messages[/B]
– Created a Trash bin to store recently deleted messages.
– Call & Text on other devices
– Added the ability to turn Call & text on other devices on or off with Bixby Routines.
[B]Calendar[/B]
– Events with the same start time are now shown together in month and agenda view.
– Reorganized options for adding and editing events.
– Improved layout for full screen alerts.
[B]Reminder[/B]
– Improved layout for full screen alerts
[B]Camera[/B]
– Improved auto-focus and auto exposure functionality and usability.
– Improved stabilization when taking pictures of the moon at high zoom levels.
[B]Photo editor[/B]
– Added the ability to revert edited pictures back to their original versions.
[B]Bixby Routine[/B]
– Grouped preset routines help you get started quickly and learn how to build your own routines easily.
– You can now see what actions are reversed when a routine ends.
– New conditions have been added, such as a specific start time, the disconnection of a Bluetooth device or Wi-Fi network, a call from a specific number, and more.
– New actions have been added, including talking to Bixby and accessibility actions.
– You can add a customized icon for each routine and add routines to the Lock screen for quick access.
[B]Digital wellbeing and Parental controls[/B]
– Added trends to your weekly report. You can see how your usage has changed since the previous week and check your usage time for each feature.
– Added phone usage time while driving to the weekly report.
– Added a lock screen widget so you can check your screen time without unlocking your phone.
– Added separate profiles for personal and work modes so you can track your screen time separately.
[B]Internet[/B]
– Added ability to block websites from redirecting you when you tap the Back button.
– Added warnings and blocking options for websites that shot too many pop-ups or notifications.
– Rearranged menus to make things easier to find.
– Added several new add-ons, including one that translates websites.
– Added option hide the status bar for a more immersive browsing experience.
– Increased maximum number of open tabs to 99.
– Added ability to lock and reorder tabs.
– Improved design for tab bar which is now supported on all devices.
– Ended support for Samsung Internet edge panel.
[B]Quick panel[/B]
– See your conversations and media more conveniently in their own sections when you swipe down from the top of the screen.
[B]AOD[/B]
– Always On Display widgets are improved.
[B]Accessibility[/B]
– Get quick access to the most important accessibility settings during device setup.
– Get recommended accessibility features based on what you use.
– Set the Accessibility shortcut more easily in settings.
– Sound detectors now work with your SmartThings devices such as TVs and lights to give you more visible alerts when the doorbell rings or a baby is crying.
[B]Samsung Keyboard[/B]
– You can find the keyboard in settings more easily under General management in Settings, and the settings have been reorganized to put the most important ones first.
Samsung DeX
– You can now connect to supported TVs wirelessly.
– New touchpad multi-gestures let you change screen zoom and font size more easily.
Feel free to add anything else that you observe.
warriorvibhu said:
Wohooo Fingers Crossed. Did it finish ?
Click to expand...
Click to collapse
Yes it did, running 3.0 beta now!
warriorvibhu said:
I flashed on an Unlocked one so there is no way for me to tell if this can be flashed on N986U since so many people have flashed Unlocked firmware on the U devices using Odin (One confirmed guy flashed unlocked firmware on Verizon locked device and got the Beta banner) hence i think this will work for all Snapdragon devices. Give it a try and see. Just that before you try this make sure you are on ATID firmware.
Click to expand...
Click to collapse
I'm on n9860 which is a snapdragon. I'm not sure if it's the same. Anyone want to try?
My US unlocked stuck at 16% when sideloading? Is it normal?
jianansong said:
My US unlocked stuck at 16% when sideloading? Is it normal?
Click to expand...
Click to collapse
Since how long ?
Which step are you at?
warriorvibhu said:
Since how long ?
Which step are you at? (See Pics)
Click to expand...
Click to collapse
On my phone, it shows "Verifying updte package..."
On the adb, it shows serving update.zip 16%.
It has been there for at least 20 minutes... Do I need to cancel and restart?
I used the uploaded adb and the first link for update.zip.
jianansong said:
On my phone, it shows "Verifying updte package..."
On the adb, it shows serving update.zip 16%.
It has been there for at least 20 minutes... Do I need to cancel and restart?
I used the uploaded adb and the first link for update.zip.
Click to expand...
Click to collapse
Yes thats too long Cancel and restart, It took me 97.5 seconds to verify the package.
Your ADB is fine dont change that. For firmware you can try using the second link from google drive. do you meet the criteria Unlocked and on ATID ?
warriorvibhu said:
Yes thats too long. do you meet the criteria Unlocked and on ATID ?
Click to expand...
Click to collapse
Yes, mine is us unlocked and it's on ATID. Do you know how I could cancel it?
---------- Post added at 03:45 PM ---------- Previous post was at 03:43 PM ----------
jianansong said:
Yes, mine is us unlocked and it's on ATID. Do you know how I could cancel it?
Click to expand...
Click to collapse
At the command line, I clicked "control + C" and surprisingly the progress number starts moving again, and now I am at 53% and it's still going...