stuck on loading screen, can't go back to stock firmware - Galaxy Note 4 Q&A, Help & Troubleshooting

Good day,
i tried flashing custom rom in my Note 4 N910C. however, i messed up big time. i had many problems, then i decided to go back to the official stock firmware i have in my PC.
every time i run the ODEN, i put the Rom in the PDA, then click "start". it takes a few seconds, then i see this message (all threads completed. (succeded 0 / failed 1)
i tried restarting my PC, but no luck. i changed the PC port, but no luck. i restarted my phone many times, but no luck.
it is worth mentioning that i wiped everything using the recovery mode.
the download mode information:
Current Binary: Samsung official
System status: official
Knox Warrant VOID: 1
RP SWREV: 2
SW REV. CHECK FAIL. DEVICE:2, Binary: 1
all i want now is to return to my stock firmware and my phone is working again
i am no expert, but i want to learn, but that is why i risked it
can you help?
thanks so much

Go on SamMobile site and download the rom related to your device. Apply via Odin and ready
You can also use the Phone Info + app to get the exact ROM for your device

S3Killer said:
Go on SamMobile site and download the rom related to your device. Apply via Odin and ready
You can also use the Phone Info + app to get the exact ROM for your device
Click to expand...
Click to collapse
before i ruined my phone, it was running 6.0.1 Marshamallow.
i am now downloading Marshamllow ROM from sammobile for my note 4. and i will try again. hopefully it will work i will be really broken if it does not work again!!!!!

You can not download any ROM version. It has to be in your area. You know what is the base version of its N4?
You did wipes after you have installed? Enter recovery mode - wipe - advanced and select "Dalvik, System and Cache"

S3Killer said:
You can not download any ROM version. It has to be in your area. You know what is the base version of its N4?
You did wipes after you have installed? Enter recovery mode - wipe - advanced and select "Dalvik, System and Cache"
Click to expand...
Click to collapse
yes, i am downloading the the ROM version that is suitable to my phone which is N910C.
and yes, i did wipe everything actually.
i have been sitting on my PC for hours, but due to my lack of experience, i am having a very hard time resolving this issue.
i hope it is resolved

Okay. Take it easy
You wore what version of Android? 4.4.4? 5.1.1?

S3Killer said:
Okay. Take it easy
You wore what version of Android? 4.4.4? 5.1.1?
Click to expand...
Click to collapse
i really thank you for trying to help out bro
before i ruined it, it was running Marshamallow 6.0.1 stock firmware.
after having issues, i had to wipe everything and flash back to an older version 5.1.1 (i have it in my PC). and only then i started having these issues i stated earlier.
i am still waiting for my download to finish, i am downloading the Marshamallow 6.0.1.
i started to doubt that flashing it to an older version, maybe this where the problem is.
what do you think?

Use google translator ... lol
There is an update of 5.1.1 (a COJ5) that prevents you from coming to 4.4.4. Recently that came out a version 6.0.1 that stock also prevents returning to 5.1.1
I do not know if it can be what happened to you.
You can use the Samfirm app to be able to download faster.
When flashing is you're downloading, it gives an error post the screen here for us.

S3Killer said:
Use google translator ... lol
There is an update of 5.1.1 (a COJ5) that prevents you from coming to 4.4.4. Recently that came out a version 6.0.1 that stock also prevents returning to 5.1.1
I do not know if it can be what happened to you.
You can use the Samfirm app to be able to download faster.
When flashing is you're downloading, it gives an error post the screen here for us.
Click to expand...
Click to collapse
brother, it worked
i tried the new ROM i downloaded 6.0.1 and it worked. it seems the problem was with the older ROM i have previously.
everything is OK now
i thank you again for helping bro

Good job friend

Related

Update Error

Hi guys! I hope someone could help me. I just bought a Galaxy Note 3 (international version) yesterday. The phone's fine. It's just that I am unable to update. I am able to download it but when my phone reboots it shows a dead android with a red triangle on its chest. I read flashing the firmware via odin can fix it but problem is our internet is hella slow. I couldn't even complete downloading my brother's Note 2 firmware. Any way I can make it install the firmware successfully? By the way it's OTA. I am able to download the update, just won't let me finish installing it. Goes around 35% then the android on the black screen dies with a red triangle on its chest.
EDIT:
I have official firmware, never rooted, just got it yesterday. Still factory new.
version 4.3, build # JSS15J.N9005ZHUBMI7, baseband version N9005XXUBMI5, Kernel version 3.4.0-1626679
Have you tried reseting your phone go into recovery mode factory reset
Mygadgetgeek.com
mygadgetgeek.com said:
Have you tried reseting your phone go into recovery mode factory reset
Mygadgetgeek.com
Click to expand...
Click to collapse
not yet, but i have a lot of data now on my phone. will try that though. in case that doesn't work, any other advice?
cptnappy said:
Hi guys! I hope someone could help me. I just bought a Galaxy Note 3 (international version) yesterday. The phone's fine. It's just that I am unable to update. I am able to download it but when my phone reboots it shows a dead android with a red triangle on its chest. I read flashing the firmware via odin can fix it but problem is our internet is hella slow. I couldn't even complete downloading my brother's Note 2 firmware. Any way I can make it install the firmware successfully? By the way it's OTA. I am able to download the update, just won't let me finish installing it. Goes around 35% then the android on the black screen dies with a red triangle on its chest.
EDIT:
I have official firmware, never rooted, just got it yesterday. Still factory new.
version 4.3, build # JSS15J.N9005ZHUBMI7, baseband version N9005XXUBMI5, Kernel version 3.4.0-1626679
Click to expand...
Click to collapse
Was your phone brand new? And did you check your KNOX status? -- reason I ask, after you've rooted a phone you are unable to recieve OTA updates, unless you use Wanam to fake system status, then you can download the OTA update but it stalls on the install about 35% or so in..
Best advice, is grab the stock image from sammobile (ballache to download I know) then use ODIN to flash her back to original state.
radicalisto said:
Was your phone brand new? And did you check your KNOX status? -- reason I ask, after you've rooted a phone you are unable to recieve OTA updates, unless you use Wanam to fake system status, then you can download the OTA update but it stalls on the install about 35% or so in..
Best advice, is grab the stock image from sammobile (ballache to download I know) then use ODIN to flash her back to original state.
Click to expand...
Click to collapse
i didn't root the phone when i got it. it's fresh and on official firmware. have no idea about KNOX, that's new to me. if it helps, my device status says "official"
unfortunately the internet in my area is very slow, i couldn't download firmwares from sammobile. i tried several times
cptnappy said:
i didn't root the phone when i got it. it's fresh and on official firmware. have no idea about KNOX, that's new to me. if it helps, my device status says "official"
unfortunately the internet in my area is very slow, i couldn't download firmwares from sammobile. i tried several times
Click to expand...
Click to collapse
Ah Ok, if it says Official it should be good to go. Seems like maybe the download has gotten corrupt due to an intermittent internet connection.
cptnappy said:
i didn't root the phone when i got it. it's fresh and on official firmware. have no idea about KNOX, that's new to me. if it helps, my device status says "official"
unfortunately the internet in my area is very slow, i couldn't download firmwares from sammobile. i tried several times
Click to expand...
Click to collapse
OK, then maybe you should learn a few things before trying to update - Knox is a security system in latest Samsung phones that is supposed to be triggered/set when you root (or install any custom kernel/recovery). Your initial (old) firmware could still let you root without triggering the Knox flag, and then you can update to the latest firmware for your region using Mobile Odin Pro and still keep your root AND without triggering the Knox flag. However once you update using Samsung OTA / Odin / Kies to a firmware more recent than MJ3 you can no longer root without also triggering your Knox warrany flag - read more about this in the Universal Root De La Vega thread!
i gave up after several tries, since i'm on 4.3 i think that would do for now. maybe it's just downloading a stability update or something? everytime i do an OTA update, it tells me that the download of the new firmware is complete then reboot. when i get to 32% the droid falls flat on its back and shows the red triangle on its chest, over and over. i don't lose my phone data or anything. just won't update. i'll wait for 4.4 Kitkat instead. hope i'll be able to update to that when it comes out.
EDIT: i tried going into recovery mode, wiping cache, and factory reset.. still no dice. maybe Odin's the only way i guess. problem is my internet connection lol
@cptnappy - i also have the same problem...got my note3 n9005 a week ago and I also have the same problem as you....error at 30+%
tried update thru Kies with no luck...same error appears
Sent3 said:
@cptnappy - i also have the same problem...got my note3 n9005 a week ago and I also have the same problem as you....error at 30+%
tried update thru Kies with no luck...same error appears
Click to expand...
Click to collapse
i managed to update mine using Samsung Kies3 (not Kies, but Kies3). Hope updating OTA is fixed in the future with the update i just did

[Q] bricked note 3

Hey guys, so I have a note 3 n9005,which i had rooted previously. This morning, I tried to flash the new touchwiz kitkat firmware via Odin and failed. Now the phone wouldn't boot up, but I an able to make it into the download mode. I have tried flashing several firmwares but neither of them works, I also had cm11 installed, so odpnt know f the bootloader has been updated or not...
So of anybody could please help me with this, that would be greatly appreciated
i have excatly the same problem tried to update s9005 via odin hong kong version to german 4.4.2 and now wont boot, odin fails only 20 seconds in read so many threads would also like to see some solutions to op.
CaptaiinCaveman said:
Hey guys, so I have a note 3 n9005,which i had rooted previously. This morning, I tried to flash the new touchwiz kitkat firmware via Odin and failed. Now the phone wouldn't boot up, but I an able to make it into the download mode. I have tried flashing several firmwares but neither of them works, I also had cm11 installed, so odpnt know f the bootloader has been updated or not...
So of anybody could please help me with this, that would be greatly appreciated
Click to expand...
Click to collapse
You also need to add some of the stuff it is written in download mode and the log in Odin when in fails. If you went to 4.4.2 on N9005 you can not return to 4.3 (which you should have read by now, there are only 200 posts in 50 threads about it). What kind of N9005 was yours (16/32/64GB), what region/CSC?
xclub_101 said:
You also need to add some of the stuff it is written in download mode and the log in Odin when in fails. If you went to 4.4.2 on N9005 you can not return to 4.3 (which you should have read by now, there are only 200 posts in 50 threads about it). What kind of N9005 was yours (16/32/64GB), what region/CSC?
Click to expand...
Click to collapse
I flashed the DBT FW again with this pit file created by HSDPilot http://forum.xda-developers.com/showpost.php?p=50614669&postcount=77.
It worked and lash was complete now however i am stuck in SAMSUNG logo after restart.
ANy help?
solution
newapostlenew said:
I flashed the DBT FW again with this pit file created by HSDPilot http://forum.xda-developers.com/showpost.php?p=50614669&postcount=77.
It worked and lash was complete now however i am stuck in SAMSUNG logo after restart.
ANy help?
Click to expand...
Click to collapse
hi i followed your instructions afte having the same problem.
once it was flashed and at the samsung logo
i took battery out, replaced it and started phone in recovery mode. go to wipe factory reset
then reboot
mine worked and is ok .
CaptaiinCaveman said:
Hey guys, so I have a note 3 n9005,which i had rooted previously. This morning, I tried to flash the new touchwiz kitkat firmware via Odin and failed. Now the phone wouldn't boot up, but I an able to make it into the download mode. I have tried flashing several firmwares but neither of them works, I also had cm11 installed, so odpnt know f the bootloader has been updated or not...
So of anybody could please help me with this, that would be greatly appreciated
Click to expand...
Click to collapse
darkman13 said:
i have excatly the same problem tried to update s9005 via odin hong kong version to german 4.4.2 and now wont boot, odin fails only 20 seconds in read so many threads would also like to see some solutions to op.
Click to expand...
Click to collapse
Do either of you have a 16 GB version?
Hi All,
My problem :
I wanted to install the official kitkat rom but I made a big mystake : I took N900 files instead of N9005...
After that I successfully installed the right bootloader and CWM.
I installed some cuustom roms but the setupwizard crash at the last step
I tried to flash the complete official 4.4.2 rom but odin failed with message on the phone : "ODIN : invalid ext4 image"
Anybody has any idea to help me ?
hi guys i manage to fix it, well mine anyway worked by flashing the pit i found on xda and selecting repartion on odin 3.7 along with german 4.4.2 to my n9005 from Hong Kong, re booted and done a factory reset via volume button also wiped cache and re started and it came back alive on the selected german rom 4.4.2. hope it hels others. ps my note 3 was from hong kong n9005 32gb
xclub_101 said:
You also need to add some of the stuff it is written in download mode and the log in Odin when in fails. If you went to 4.4.2 on N9005 you can not return to 4.3 (which you should have read by now, there are only 200 posts in 50 threads about it). What kind of N9005 was yours (16/32/64GB), what region/CSC?
Click to expand...
Click to collapse
hey, i wasnt trying to downgrade, i was going from cm11 to official 4.4.2. i've got a 32gb model from france i believe (the box has french written all over it so do the manuals)
newapostlenew said:
I flashed the DBT FW again with this pit file created by HSDPilot http://forum.xda-developers.com/showpost.php?p=50614669&postcount=77.
It worked and lash was complete now however i am stuck in SAMSUNG logo after restart.
ANy help?
Click to expand...
Click to collapse
dude, you are god thank you so much for that, working perfect now
xclub_101 said:
You also need to add some of the stuff it is written in download mode and the log in Odin when in fails. If you went to 4.4.2 on N9005 you can not return to 4.3 (which you should have read by now, there are only 200 posts in 50 threads about it). What kind of N9005 was yours (16/32/64GB), what region/CSC?
Click to expand...
Click to collapse
After installing DBT NB4 FW ( or with Polish NB3 FW) my LTE speeds become almost 0.
I tried multiple installs.
Any guidance?
Quick tip: Uninstall KIES.
Kies is like a big brother.
Use ODIN 1.85 and tick update phone bootloader. That's how I fixed mine. The other versions of Odin wouldn't let me update bootloader.
Of course, before you do this Flash/wipe data in recovery mode.
But uninstalling KIES solved my issue.
Sent from my SM-N9005 using Tapatalk

[Q] Quick Question If Someone Has a Moment, Please

I just swapped from my Amaze 4g, to a used Note 3, and I'm a little lost as far as where I should start.
It says that it's on 4.4.2, and that I cannot update due to a modified system.
Basically, I would like to get updated to 5.1.1 (or as close as is official for the Note 3), and root it.
I'm afraid I'm not familiar with Samsung devices, and because I purchased this from ebay, I don't know how to tell the exact state that the former user put it in (I expected they would return it to stock prior to selling).
It's currently a T-Mobile branded, SM-N900T, on 4.4.2, build is KOT49H, security software MDF v1.0 release 2. Kernel is 3.4.0-660648.
It is supposedly unlocked for carriers, though I have not attempted a SIM card use yet, until I can tell that what I have is a valid device and the IMEI is checked out.
Any thoughts on how to validate the IMEI, and sort out how to get my new phone up to date would be appreciated. As I stated, I expected the vendor would have returned it to stock, but that is clearly not the case, so I don't want to accidentally boot loop it by doing something I shouldn't. I have not owned a Samsung before, so I want to be careful on how it differs from my Nexus 7, Amaze 4g, and Droid X, as they're all obviously very different in the OS area.
Thank you for the help1
Download tbe stock 4.4.2 rom and use odin to install. Then you will get the OTA updates.
Sent from my SM-N900P using Tapatalk
There is no stock 5.1.1 for note 3, only cm12.1/ aosp. Latest is 5.0 and you can use odin to flash. Maybe it's rooted that's why you can't update.
bladebarrier said:
I just swapped from my Amaze 4g, to a used Note 3, and I'm a little lost as far as where I should start.
It says that it's on 4.4.2, and that I cannot update due to a modified system.
Basically, I would like to get updated to 5.1.1 (or as close as is official for the Note 3), and root it.
...
Thank you for the help1
Click to expand...
Click to collapse
Some apps to install from Play Store...
Phone INFO Samsung - this will tell you all about your phone and the firmware etc.
Root Checker Basic - tells you if you are rooted or not.
SuperSU - this is so valuable you should buy the Pro licence. Chainfire does some great work for our phones.
TWRP - I have the zip version on my extSDCard and an Odin version on PC in case I have to rebuild from a Stock firmware. CWN works OK but most ROM builds seem to be for TWRP I think and a backup from one will not work on the other.
I don't know your previous phone so you probably need Odin v3.09 - this sits on PC and lets you flash firmware to the phone. (connected by USB)
For which you need Samsung USB drivers so the PC will recognise the phone. Install on PC before connecting phone.
Then do some browsing and find the processes to root your phone and install the ROM you want. If you just want Stock and access to all your phone, you can root it after flashing the original v5.0 download (from Sammobile or similar site - note on Sammobile you need a free account to DL) and then install Custom recovery (if wanted - it WILL trip the Knox flag but that may not matter given it's 2nd hand and might already be tripped anyway)
Read, make SURE you understand what is being said BEFORE you do anything - ask if you don't.
Good luck...
N9005 Lollipop brick
Hi All, just need a huge help here, a friend of mine has been using a N9005 which was auto restarting, she went online and downloaded this firmware...N900AUCUEOC1_N900AATTEOC1_N900AUCUEOC1_HOME.tar.md5....2.5GB in size...and flashed it, but the phone is stuck in boot loop even after recovery wiping data and cache, the phone can boot into download mode but re flashing the firmware always fails.....is there a solution for this.....please help
Thank you all for the info, especially the detailed info from Journyman16. I checked, and it is flagged as custom, which is fine, so I'm going to go ahead and try to return to mostly stock, update it, and root it.
Ok, everything went well. I had to do two attempts at rooting, but I think it's just one of those things where sometimes it doesn't restart into the process every time.
All seems good. I'm on 5.0, rooted, busyboxed, and smooth sailing.
Thank you all, again, for the tips. The Note 3 is running very well. Thank you to all of the devs that have made this process so refined. I've donated to you before, and did so again today. It's outstanding to have such well versed coders, on XDA, helping out the community.
mjmbirige said:
Hi All, just need a huge help here, a friend of mine has been using a N9005 which was auto restarting, she went online and downloaded this firmware...N900AUCUEOC1_N900AATTEOC1_N900AUCUEOC1_HOME.tar.md5....2.5GB in size...and flashed it, but the phone is stuck in boot loop even after recovery wiping data and cache, the phone can boot into download mode but re flashing the firmware always fails.....is there a solution for this.....please help
Click to expand...
Click to collapse
You have never learned not to ask in others posts? What does your problem has to do with this topic at all?
When you need help. Just click on Q&A then Create a new thread. How hard is it?

All I want is a reliable stock ROM :(

Hi all,
very new here and to flashing ROMs etc.
Anyway, bought a 2nd hand Note 3 a couple months ago. It had a custom ROM on it and I was experiencing issues with it.
I've since (after Google taught me), managed to get a close to stock ROM on it. But sadly Im still having problems, mainly WiFi and Bluetooth not working.
Can anyone please recommend a reliable, stock or close to stock ROM?
I dont need anything fancy...I just want to be able to use standard features (mainly WiFi).
Thanks all
I've been using the music of life note5 port 5.1.1 touchwiz rom for months and that's been fine for the most part. darkera13 released a s7 6.0.1 port like 2 days ago on the samsungvn forum, it's buggy but usable, but it's second version are sure to fix the little bugs it has (battery life is bad, can't access sd in pc, other bugs that don't affect me). There is one 6.0.1 s5 port here but I haven't tried it. If you really wanna try the latest touchwiz 6.0.1 rom, wait a few days/week or so for a more stable version, otherwise I'd try one of the 5.1.1 note5 ports in here.
Flash a stock rom from sammobile or samsung-updates via Odin .
Thanks
JJEgan said:
Flash a stock rom from sammobile or samsung-updates via Odin .
Click to expand...
Click to collapse
Have tried installing a stock ROM from Samsung Updates but still no Wifi or Bluetooth. Starting to wonder if its a hardware problem. WiFi etc does work sometimes, but then goes off for days at a time.
Really frustrating.
jasongroves said:
Have tried installing a stock ROM from Samsung Updates but still no Wifi or Bluetooth. Starting to wonder if its a hardware problem. WiFi etc does work sometimes, but then goes off for days at a time.
Really frustrating.
Click to expand...
Click to collapse
Could be anything. Even hw fault... Could you be more specific about:
What custom rom you had?
Is there any chance you had deleted something from efs folder?
Can you activate wifi and doesn`t find networks or the toggle is grayed and can`t do anything?
For bluetooth, can you activate it and doesn`t find devices or the toggle is grayed and can`t do anything?
Try this from sammobile.
Thanks, Im downloading now and will test it out.
Im not 100% sure what ROM it was as I didnt install it.
I do remember something about CM12 ?
Cant activate Wifi or bluetooth at all. It will try and turn on for either but fail and then grey out temporarily.
Ive only installed a custom ROM and havent done anything with an efs folder.
Could you please check if yout imei is there:
In stock rom it is in about device -> Status
Do not post the numbers here just look if the numbers are there
V_B said:
Could you please check if yout imei is there:
In stock rom it is in about device -> Status
Do not post the numbers here just look if the numbers are there
Click to expand...
Click to collapse
Yes IMEI is definitely there.
jasongroves said:
Yes IMEI is definitely there.
Click to expand...
Click to collapse
And all other too ?
Like serial number or so
Anyways I recommend you the following:
Download official kit kat firmware xxugng1 and latest lollipop firmware for your country
Do a factory reset
Flash kit kat with odin
Do again a factory reset (just to go sure)
Reboot and do the setup
Root it with cf auto-root
(If phone takes too long to boot remove Battery and start you phone)
When phone is booted Download triangle away
Launch it and reset status and counter
Than it will ask you to reboot or boot in download mode
Choose boot in download mode
Flash latest available lollipop for your country
Factory reset
And than you should not have any problems
(Do backup before it will wipe everything in your phone)
V_B said:
And all other too ?
Like serial number or so
Click to expand...
Click to collapse
Serial number is there.
Device status says official.
Bluetooth address is unavailable.
IP address is unavailable.
Phone number is unknown.
jasongroves said:
Serial number is there.
Device status says official.
Bluetooth address is unavailable.
IP address is unavailable.
Phone number is unknown.
Click to expand...
Click to collapse
I edited my post do the steps and report again.
When after this the problems apare than my friend its hardware prblem 90% sure
Check correct IMEI.
Check correct modem s.
Check CSC.
Try another kernel
Could well be that you have the wrong IMEI .
I would be restoring my backed up EFS folder first .
Sent from my SM-N920C using XDA-Developers mobile app
jasongroves said:
Hi all,
very new here and to flashing ROMs etc.
Anyway, bought a 2nd hand Note 3 a couple months ago. It had a custom ROM on it and I was experiencing issues with it.
I've since (after Google taught me), managed to get a close to stock ROM on it. But sadly Im still having problems, mainly WiFi and Bluetooth not working.
Can anyone please recommend a reliable, stock or close to stock ROM?
I dont need anything fancy...I just want to be able to use standard features (mainly WiFi).
Thanks all
Click to expand...
Click to collapse
If you had a TWRP backup of your previous rom, you wouldn't have been in this predicament.
Try updating baseband version.
Your safest bet is to download Samsung firmwares from 4.2 - 4.4 and 5 & flash it via odin in consecutive order and check if your hardware works.
Or else it might be a faulty HW issue.
A twrp backup would not necessarily fix the issue if it was a hardware problem and it sounds like it is a hardware problem if flashing the latest stock rom does not resolve the issue.
vishnu vijay said:
If you had a TWRP backup of your previous rom, you wouldn't have been in this predicament.
Try updating baseband version.
Your safest bet is to download Samsung firmwares from 4.2 - 4.4 and 5 & flash it via odin in consecutive order and check if your hardware works.
Or else it might be a faulty HW issue.
Click to expand...
Click to collapse
I never made a back up as the phone came with a custom ROM that started playing up within days of getting the phone.
Am trying to find the earlier firmware versions to download now.
Thanks.
audit13 said:
A twrp backup would not necessarily fix the issue if it was a hardware problem and it sounds like it is a hardware problem if flashing the latest stock rom does not resolve the issue.
Click to expand...
Click to collapse
Im really hoping its not a hardware issue as according to 2 local phone repairers its not worth fixing
JJEgan said:
Check correct IMEI.
Check correct modem s.
Check CSC.
Try another kernel
Could well be that you have the wrong IMEI .
I would be restoring my backed up EFS folder first .
Sent from my SM-N920C using XDA-Developers mobile app
Click to expand...
Click to collapse
IMEI matches my phone, as does serial etc.
Whats the CSC please?
Current kernel is listed as 3.4.0-4540543.
I dont have a backed up EFS folder unfortunately.
V_B said:
And all other too ?
Like serial number or so
Anyways I recommend you the following:
Download official kit kat firmware xxugng1 and latest lollipop firmware for your country
Do a factory reset
Flash kit kat with odin
Do again a factory reset (just to go sure)
Reboot and do the setup
Root it with cf auto-root
(If phone takes too long to boot remove Battery and start you phone)
When phone is booted Download triangle away
Launch it and reset status and counter
Than it will ask you to reboot or boot in download mode
Choose boot in download mode
Flash latest available lollipop for your country
Factory reset
And than you should not have any problems
(Do backup before it will wipe everything in your phone)
Click to expand...
Click to collapse
Yes, serial etc all match.
Just looking at the baseband and the build numbers. Should they match? As mine dont.
Baseband : N9005XXUGBOJ1
Build: LRX21V.N9005XXUGBOK6
jasongroves said:
Yes, serial etc all match.
Just looking at the baseband and the build numbers. Should they match? As mine dont.
Baseband : N9005XXUGBOJ1
Build: LRX21V.N9005XXUGBOK6
Click to expand...
Click to collapse
No they should not match .
Modems/ baseband are often a different build .
Did wifi ever work properly? If not, it may not be worth fixing.
The easiest solution may be to find another phone that has a smashed screen nd swap motherboards.

Device not starting/black screen after stock-ROM flash via Odin

Hello, everyone,
I tried to install LineageOS on my S10 Plus yesterday. That worked so far, but I found that it didn't have a decent camera app and the Samsung Watch wasn't that easy to connect either. So I thought I'd just go back to the Stock ROM again. I then downloaded the latest stock firmware according to this guide and installed it with Odin. The installation also runs through, after the installation the mobile phone starts and after the start screen there is an Android man with the signature "Erasing". After a few seconds, the device turns off and stays black. Even if I put it on the charger or try to restart it, nothing happens. I keep getting into download mode and recovery, but that's about it. Multiple reinstallations and resets via the recovery didn't help - the phone just won't start.
I used the CSC_... and not the HOME_CSC_... at the firmware is the right one for my phone.
Is there any way I can salvage the device? I'm afraid that something in the memory is defective now, which has nothing to do with the flashing itself. Do you have any ideas?
Many thanks!
tefracky said:
Hello, everyone,
I tried to install LineageOS on my S10 Plus yesterday. That worked so far, but I found that it didn't have a decent camera app and the Samsung Watch wasn't that easy to connect either. So I thought I'd just go back to the Stock ROM again. I then downloaded the latest stock firmware according to this guide and installed it with Odin. The installation also runs through, after the installation the mobile phone starts and after the start screen there is an Android man with the signature "Erasing". After a few seconds, the device turns off and stays black. Even if I put it on the charger or try to restart it, nothing happens. I keep getting into download mode and recovery, but that's about it. Multiple reinstallations and resets via the recovery didn't help - the phone just won't start.
I used the CSC_... and not the HOME_CSC_... at the firmware is the right one for my phone.
Is there any way I can salvage the device? I'm afraid that something in the memory is defective now, which has nothing to do with the flashing itself. Do you have any ideas?
Many thanks!
Click to expand...
Click to collapse
same thing happened to me today. but I flashed my s10e the bootloader and modem file of android 9 from twrp, the phone did not boot up and I loaded the stock rom again, then when I open it, it's the same as yours, I really need urgent help.
Releases · corsicanu/9820-bootloaders_and_modems
Contribute to corsicanu/9820-bootloaders_and_modems development by creating an account on GitHub.
github.com
EDİT: Anyway, I solved the problem, I flashed the bootloader and modem file that is suitable for my current version from the same site with twrp and the phone turned on. maybe you can solve it by flashing the bootloader and modem file suitable for the current version. try if you want
Thanks a lot, this worked!
tefracky said:
Thanks a lot, this worked!
Click to expand...
Click to collapse
I'm glad it worked.
I was very afraid that the phone died, what did you do for 5 days in this state?
Now I have a question in my mind: When Samsung releases an update in the future, will the bootloader and modem files be updated when we update it with odin? won't it be updated? After that, do we will always update manually as twrp? do you have any idea?
Well, I simply didn't use a mobile phone in these days. It was a very "interesting" experience, but not a huge problem. I sometimes opened WhatsApp as Windows App (interestingly, which works without phone).
I don't know, what happens at a Samsung Update, but until Android 13, I will not update (so probatly never). In our German forum (www.android-hilfe.de), a pre rooted and debloated "Stock"-Firmware is provided, but I can't install it, since my Bootloader is too new (V15 instead V14 for the ROM). When it is possible, I will install this firmware. If you are interested, here is the link: https://www.android-hilfe.de/forum/...3-2022-stock-rom-v2-0-pre-rooted.1000713.html
tefracky said:
Well, I simply didn't use a mobile phone in these days. It was a very "interesting" experience, but not a huge problem. I sometimes opened WhatsApp as Windows App (interestingly, which works without phone).
I don't know, what happens at a Samsung Update, but until Android 13, I will not update (so probatly never). In our German forum (www.android-hilfe.de), a pre rooted and debloated "Stock"-Firmware is provided, but I can't install it, since my Bootloader is too new (V15 instead V14 for the ROM). When it is possible, I will install this firmware. If you are interested, here is the link: https://www.android-hilfe.de/forum/...3-2022-stock-rom-v2-0-pre-rooted.1000713.html
Click to expand...
Click to collapse
thanks, if i'm going to use stock rom i prefer to root it myself

Categories

Resources