Database Users

[Q] MY HTC WILDFIRE bricked

i rooted my mobile using alpharev and it turned my s-off and installed clockwork recovery mod 3.0.0.6 ,later i downloaded cynogen mod 7, and while updating it hung on now it is not at all booting it just shows htc in boot screev and reeboots again and again pls help me

Go back into recovery, wipe data and cache and the reflash CM7

Its definitely not bricked, so dont worry. Firstly, make sure you have wiped all data in Clockworkmod (Wipe Data / Factory Reset Option, Wipe Cache Partition also Format /system under Advanced). Once you have done this, try reflashing the CM7 ROM File. It should work. Reboot into Recovery by turning off your phone, pressing Vol Down + Power, Navigating to Recovery, and Pressing Power Button on it.
If it still fails, it would be better to use an updated version of Clockworkmod Recovery. This solved the bootloop issue for a few users.

3xeno said:
Its definitely not bricked, so dont worry. Firstly, make sure you have wiped all data in Clockworkmod (Wipe Data / Factory Reset Option, Wipe Cache Partition also Format /system under Advanced). Once you have done this, try reflashing the CM7 ROM File. It should work. Reboot into Recovery by turning off your phone, pressing Vol Down + Power, Navigating to Recovery, and Pressing Power Button on it.
If it still fails, it would be better to use an updated version of Clockworkmod Recovery. This solved the bootloop issue for a few users.
Click to expand...
Click to collapse
i tried it several times it says installing update and it again hangs pls help

3xeno said:
Its definitely not bricked, so dont worry. Firstly, make sure you have wiped all data in Clockworkmod (Wipe Data / Factory Reset Option, Wipe Cache Partition also Format /system under Advanced). Once you have done this, try reflashing the CM7 ROM File. It should work. Reboot into Recovery by turning off your phone, pressing Vol Down + Power, Navigating to Recovery, and Pressing Power Button on it.
If it still fails, it would be better to use an updated version of Clockworkmod Recovery. This solved the bootloop issue for a few users.
Click to expand...
Click to collapse
i tried it several times i removed my battery again booted to recoverymod wipe data/reset factory reset then install from sd card then i choosed the zib file .it then shows installing updating then it hangs pls pls pls help

i tried but it still hangs saying installing update and hangs on

Nivin Abraham said:
i tried but it still hangs saying installing update and hangs on
Click to expand...
Click to collapse
Please don't multi post. Update your Clockworkmod Recovery then. The guide can be found here:
http://forum.xda-developers.com/showthread.php?p=14693680

I had nothing but trouble using recorver 3.0.0.6 . Recovery 3.1.0.2 amd 2.5.07 have worked flawless for me though.

could u pls tell me how to update Clockworkmod Recovery , i downloaded ur file but i dont know how to update it

could u pls tell me how to update Clockworkmod Recovery

- First, Download the attachment in that thread, Place it somewhere, like on your C Drive, in a Folder called Fastboot.
- Then, Download the Updated Clockworkmod Recovery (Again linked in that thread). Extract the Recovery.img file from within the Zip file and place it in the Fastboot folder created in the step before.
- Connect your Wildfire to your PC. Turn it off, and turn on in HBoot Mode. (When your phone is switched off, then Press Vol Down + Power Simultaneously. Then, Navigate to Fastboot using the Volume Keys, and Press the Power Button. Your Wildfire is now in Fastboot Mode.
- Then, Open Command Prompt, and put in the following. (I am assuming your folder is created in C > Fastboot)
cd\
cd Fastboot
fastboot flash recovery recovery.img
(In the third step, I am assuming that the file name of the updated Clockworkmod Recovery is recovery.img) It will show two steps - Sending Recovery, and Writing Recovery. After this is done, your phone has the newer version of Clockworkmod Recovery and you can flash the ROM all over again and test.

3xeno said:
- First, Download the attachment in that thread, Place it somewhere, like on your C Drive, in a Folder called Fastboot.
- Then, Download the Updated Clockworkmod Recovery (Again linked in that thread). Extract the Recovery.img file from within the Zip file and place it in the Fastboot folder created in the step before.
- Connect your Wildfire to your PC. Turn it off, and turn on in HBoot Mode. (When your phone is switched off, then Press Vol Down + Power Simultaneously. Then, Navigate to Fastboot using the Volume Keys, and Press the Power Button. Your Wildfire is now in Fastboot Mode.
- Then, Open Command Prompt, and put in the following. (I am assuming your folder is created in C > Fastboot)
cd\
cd Fastboot
fastboot flash recovery recovery.img
(In the third step, I am assuming that the file name of the updated Clockworkmod Recovery is recovery.img) It will show two steps - Sending Recovery, and Writing Recovery. After this is done, your phone has the newer version of Clockworkmod Recovery and you can flash the ROM all over again and test.
Click to expand...
Click to collapse
pls dude dont get mad i am just frustrated dude i seriously dont know how to open command prompt. i did all the steps u asked me to do. i downloaded the file which u asked me to do i saved it in c/fast boot then extracted the file recovery-clockwork-3.2.0.0-j_r0dd_mod-buzz.img then i switched on my mobile in hboot mode then connected myusb cable to it, it showed hboot usb then i selected fastboot.
now it shows fastboot usb and these r the options given below
bootloader
reboot
reboot bootloader
power down
i seriously dont know how to open command prompt ur the only one who could help me so pls help me with all due respect

Nivin Abraham said:
pls dude dont get mad i am just frustrated dude i seriously dont know how to open command prompt. i did all the steps u asked me to do. i downloaded the file which u asked me to do i saved it in c/fast boot then extracted the file recovery-clockwork-3.2.0.0-j_r0dd_mod-buzz.img then i switched on my mobile in hboot mode then connected myusb cable to it, it showed hboot usb then i selected fastboot.
now it shows fastboot usb and these r the options given below
bootloader
reboot
reboot bootloader
power down
i seriously dont know how to open command prompt ur the only one who could help me so pls help me with all due respect
Click to expand...
Click to collapse
i downloaded only the updated clockworkmod recovery ,i dont know which (Download the attachment in that thread) i dont know which file ur asking me to download from that thread

Nivin Abraham said:
pls dude dont get mad i am just frustrated dude i seriously dont know how to open command prompt. i did all the steps u asked me to do. i downloaded the file which u asked me to do i saved it in c/fast boot then extracted the file recovery-clockwork-3.2.0.0-j_r0dd_mod-buzz.img then i switched on my mobile in hboot mode then connected myusb cable to it, it showed hboot usb then i selected fastboot.
now it shows fastboot usb and these r the options given below
bootloader
reboot
reboot bootloader
power down
i seriously dont know how to open command prompt ur the only one who could help me so pls help me with all due respect
Click to expand...
Click to collapse
Command Prompt is to be opened on your Windows PC. Not on your mobile. Once you have entered into Fastboot Mode and your Wildfire is connected to your PC, thats all you need to do.
Open Start Menu. Then Select Run. Then type "cmd" (Without Quotes) and Press Enter. This will open the Command Prompt. Then follow what I said before.
(Note - If your folders name is fast boot, then replace fastboot in the commands above with fast boot. It's basically the name of your folder).
Rename the IMG file you extracted to Recovery.img, it will typing the command easier.
Lastly, my only request to you - Make only 1 post at a time. Others here are normal members and not someone with the full day free . When you continuously post something, its frustrating to read and I dont feel like replying anymore to that person.

3xeno said:
Command Prompt is to be opened on your Windows PC. Not on your mobile. Once you have entered into Fastboot Mode and your Wildfire is connected to your PC, thats all you need to do.
Open Start Menu. Then Select Run. Then type "cmd" (Without Quotes) and Press Enter. This will open the Command Prompt. Then follow what I said before.
(Note - If your folders name is fast boot, then replace fastboot in the commands above with fast boot. It's basically the name of your folder).
Rename the IMG file you extracted to Recovery.img, it will typing the command easier.
Lastly, my only request to you - Make only 1 post at a time. Others here are normal members and not someone with the full day free . When you continuously post something, its frustrating to read and I dont feel like replying anymore to that person.
Click to expand...
Click to collapse
i opened command prompt and till the second step which u asked me to type was successfull
cd\
cd Fastboot
after this u asked me to type
fastboot flash recovery recovery.img
it says fastboot is not recognized as an internal or external command,operable program or batch file.
i dont know how to proceed further ,i am really sorry for multi posting i am new to xda dude , i am terribly sorry pls forgive me

You need to have HTC driver for doing that. Install this iin your windows PC.
Link: http://db.tt/BOJCbnD
Go with the process after installing this.
Sent from my HTC Wildfire using XDA App

Nivin Abraham said:
i opened command prompt and till the second step which u asked me to type was successfull
cd\
cd Fastboot
after this u asked me to type
fastboot flash recovery recovery.img
it says fastboot is not recognized as an internal or external command,operable program or batch file.
i dont know how to proceed further ,i am really sorry for multi posting i am new to xda dude , i am terribly sorry pls forgive me
Click to expand...
Click to collapse
Dont worry about it. That was just my view.
Anyway, I hope the folder creation was correct. I hope that when you extracted the Android Win Tools folder into your C:\Fastboot folder, you deleted the original folder?
ie:, In your Fastboot folder, you shouldnt have any other folder/sub folder, and it must contain only these 4 files:
- adb.exe
- AdbWinApi.dll
- AdbWinUsbApi.dll
- Fastboot.exe
Once you have ensured this, then make sure you enter Fastboot mode on your Wildfire Correctly.
- Start HBoot mode
- Then Plug in the USB Cable
- Press Power Button, then another set 4 Options will appear, the first being Fastboot
- Then Press Power Button again
After this, try running the commands in command prompt again. Let me know how it goes.

And it you still face any issues with fastboot flashing, then see my sign for the post link to complete guide. Go there and download attached pc49img.zip and put it on your root of memory card (formatted previously with fat32 partition) . Then reboot to hboot menu to update the recovery. That's all.
Sent from my HTC Wildfire using XDA App

bharatgaddameedi said:
And it you still face any issues with fastboot flashing, then see my sign for the post link to complete guide. Go there and download attached pc49img.zip and put it on your root of memory card (formatted previously with fat32 partition) . Then reboot to hboot menu to update the recovery. That's all.
Sent from my HTC Wildfire using XDA App
Click to expand...
Click to collapse
dude ur the man it worked i am so so so happy no words to express it showed
sending recovery
writing recovery

Nivin Abraham said:
dude ur the man it worked i am so so so happy no words to express it showed
sending recovery
writing recovery
Click to expand...
Click to collapse
Great, Hope they were followed by the words "OK". If so, you have the new Recovery 3.2.0.0 on your Wildfire.
Getting the hang of Fastboot is very important IMO. It helps flashing Recoveries in 1 go, and, also helps restoring Nandroid Restores, among many other features. I am glad you have experienced it, and, not gone the "PC49IMG" way.

[Q] Phone Not Going To Recovery! Need Help!

So my rooted Mytouch 4g S=OFF is stuck at the MyTouch screen and stays there, then when i do volume down plus power it takes me to hboot then automatically starts going through my sd card for like 3 files then says do u want to start update volume up yes down no i have tried both in the end it reboots and is again frozen! I tried rebooting it with the vol down and power with my sd card out but i still cant do anything! Please help!

ashmal411 said:
So my rooted Mytouch 4g S=OFF is stuck at the MyTouch screen and stays there, then when i do volume down plus power it takes me to hboot then automatically starts going through my sd card for like 3 files then says do u want to start update volume up yes down no i have tried both in the end it reboots and is again frozen! I tried rebooting it with the vol down and power with my sd card out but i still cant do anything! Please help!
Click to expand...
Click to collapse
It sounds like you have a PD15IMG.zip file in the root of your SD card. That's what the bootloader is detecting when it asks you if you want to update or not. Remove that file and it will bypass the update step and take you to the bootloader main menu. There you can select recovery. From there, I would re-download your ROM installation file, full wipe (data, cache, Dalvik-Cache), and re-flash your ROM.

I tried that
i tried that too but it still checks for those but then lets me select recovery but when i click recovery it gives me a picture of a phone and a red triangle thanks though any more help would be much appreciated!

ashmal411 said:
i tried that too but it still checks for those but then lets me select recovery but when i click recovery it gives me a picture of a phone and a red triangle thanks though any more help would be much appreciated!
Click to expand...
Click to collapse
I don't think you have a custom recovery yet, download the rom manager from the market and have it flash a recovery for you. When you go back you should see something very different.
If for you already have flashed the recovery, press the power button when you see the lil phone pic and your recovery should come up

mark manning said:
I don't think you have a custom recovery yet, download the rom manager from the market and have it flash a recovery for you. When you go back you should see something very different.
If for you already have flashed the recovery, press the power button when you see the lil phone pic and your recovery should come up
Click to expand...
Click to collapse
I cant download anyting because i cant even get to my homescreen

ashmal411 said:
I cant download anyting because i cant even get to my homescreen
Click to expand...
Click to collapse
can you get into your phone using adb/fastboot?
flash recovery that way.

saranhai said:
can you get into your phone using adb/fastboot?
flash recovery that way.
Click to expand...
Click to collapse
sorry im a noob at this i dont know how to do that thank you for trying to help though if you have anymore please help

ashmal411 said:
sorry im a noob at this i dont know how to do that thank you for trying to help though if you have anymore please help
Click to expand...
Click to collapse
google search androidSDK, and install it on your computer.
there are millions of threads out there telling you how to set it up so i'd suggest you read some of those. once you get adb set up, connect your phone (USB DEBUGGING ON! enable in settings/applications/development).
type "adb devices" without quotes to see if your device is connected. then type
Code:
su
adb reboot bootloader
the phone should reboot into fastboot, if it isn't in fastboot, manually scroll to it with the volume buttons and select with power button.
now, you need the recovery image, i'll post it at the bottom of this post. after you get the recovery image, move it to androidSDK/tools or wherever your adb/ fastboot folder is located, and rename it to "recovery.img".
now, type
Code:
fastboot flash recovery recovery.img
it should give you two OKs, if it does, then you're all set, reboot the phone into bootloader, select recovery, and flash a rom on there

saranhai said:
google search androidSDK, and install it on your computer.
there are millions of threads out there telling you how to set it up so i'd suggest you read some of those. once you get adb set up, connect your phone (USB DEBUGGING ON! enable in settings/applications/development).
type "adb devices" without quotes to see if your device is connected. then type
Code:
su
adb reboot bootloader
the phone should reboot into fastboot, if it isn't in fastboot, manually scroll to it with the volume buttons and select with power button.
now, you need the recovery image, i'll post it at the bottom of this post. after you get the recovery image, move it to androidSDK/tools or wherever your adb/ fastboot folder is located, and rename it to "recovery.img".
now, type
Code:
fastboot flash recovery recovery.img
it should give you two OKs, if it does, then you're all set, reboot the phone into bootloader, select recovery, and flash a rom on there
Click to expand...
Click to collapse
here's the recovery image:

saranhai said:
google search androidSDK, and install it on your computer.
there are millions of threads out there telling you how to set it up so i'd suggest you read some of those.
Click to expand...
Click to collapse
To make it easier for the OP, this thread gives you all you need to know to get ADB up and running.
Also, the above fastboot instructions are correct, but will only work with the engineering bootloader. Hopefully the OP's phone has that.

i cantturn on usb debuggiing because io cant get into my phone

TeeJay3800 said:
To make it easier for the OP, this thread gives you all you need to know to get ADB up and running.
Also, the above fastboot instructions are correct, but will only work with the engineering bootloader. Hopefully the OP's phone has that.
Click to expand...
Click to collapse
lol thanks for the tip

ashmal411 said:
i cantturn on usb debuggiing because io cant get into my phone
Click to expand...
Click to collapse
was usb debugging on before..?

nope it was not on

ashmal411 said:
nope it was not on
Click to expand...
Click to collapse
oh.... that's a problem...

ashmal411 said:
nope it was not on
Click to expand...
Click to collapse
ok that's ok, you can still flash recovery through fastboot, which doesn't need USB debugging on.
so steps:
1) download the recovery image and rename to "recovery.img"
2) move the image to wherever your adb/fastboot tools are located
3) open command prompt (in windows)
4) cd to where your adb/fastboot tools are located
5) REBOOT PHONE INTO HBOOT, THEN CONNECT TO COMPUTER
6) manually scroll and select fastboot using the volume and power buttons
7) type
Code:
fastboot devices
to make sure your phone is detected.
8) if it is, type
Code:
fastboot flash recovery recovery.img
should give you two OKs.
9)once the recovery is in there, flash a rom on

OTA upgrade problem

Hi
I have an international version 802 version with ROM of g.lewarne inside (rooted)
I've received and accepted the new OTA upgrade, and now i'm stick in the Clockworckmod Recovery.
I've flashed my LG back to the g.lewarne ROM but each time i restart my phone it goes directly to the CWM recovery Mode.
Any suggestion of what to do to get my phone starting normally?

Partager.info said:
Hi
I have an international version 802 version with ROM of g.lewarne inside (rooted)
I've received and accepted the new OTA upgrade, and now i'm stick in the Clockworckmod Recovery.
I've flashed my LG back to the g.lewarne ROM but each time i restart my phone it goes directly to the CWM recovery Mode.
Any suggestion of what to do to get my phone starting normally?
Click to expand...
Click to collapse
You have to flash back to stock...theres a thread in general forum....

RubbleTea said:
You have to flash back to stock...theres a thread in general forum....
Click to expand...
Click to collapse
I can't get into download mode using up volum and pluging in the usb.

Partager.info said:
I can't get into download mode using up volum and pluging in the usb.
Click to expand...
Click to collapse
Try holding vol up then plugging it again...

RubbleTea said:
Try holding vol up then plugging it again...
Click to expand...
Click to collapse
I'm trying but it keeps getting me back to the CWM recovery mode.

Partager.info said:
I'm trying but it keeps getting me back to the CWM recovery mode.
Click to expand...
Click to collapse
Oh forgot .....the phone has to be off...the hold vol up only then plug in USB chord try that...it shouldn't boot to recovery if it doesn't work

RubbleTea said:
Oh forgot .....the phone has to be off...the hold vol up only then plug in USB chord try that...it shouldn't boot to recovery if it doesn't work
Click to expand...
Click to collapse
Still the same problem.

Partager.info said:
Still the same problem.
Click to expand...
Click to collapse
Damn really?.....maybe check the thread for back to stock...they'll prob be more help or check around somebody around here o that thread has had the same problem as you.....hope this helps

RubbleTea said:
Damn really?.....maybe check the thread for back to stock...they'll prob be more help or check around somebody around here o that thread has had the same problem as you.....hope this helps
Click to expand...
Click to collapse
thank you anyway.
Now it keeps rebooting on lg logo with the error: secure booting error
Any idea?

Update:
A new situation here.
Once i plug my phone to the computer i get the lg logo with the famous error: secure booting error
then the phone screen goes black, however the phone is still on with black screen. on my compyter a new drive is detected with only one folder inside called image with many files inside:
- adsp.b00, adsp.b01, adsp.b02.......adsp.b12, adsp
- cmnlib.00, cmnlib.01, cmnlib.02, cmnlib.03, cmnlib
- dxhdcp2.b00.....until b03, dxhdcp2
- isdbtmm.b00.....until b03, isdbtmm
- mlserver.....
- modemb00....... untill modem.b26, modem
and other files.
PS: i've made a factory reset.
I don't know what can i do now to get my phone alive.

i have the same problem, i got an update yesterday for my german vodafone lg g2 und cant get out of my CWM, i dont know what to do, cant get into download mode
i tryed to transfer a rom.zip to my phone via adb , but my adb doesnt know the command sideload and push does nothing

http://forum.xda-developers.com/showthread.php?t=2569237
See if this help you... tip: use lg g2 flash tool to go back because you are not going to fix it ! Only by going back to stock.
Sent from my LG-LS980 using xda premium

Nicamarcel1 said:
http://forum.xda-developers.com/showthread.php?t=2569237
See if this help you... tip: use lg g2 flash tool to go back because you are not going to fix it ! Only by going back to stock.
Sent from my LG-LS980 using xda premium
Click to expand...
Click to collapse
It doesn't go to download mode.

What you need to do to fix this
If you´re stuck in CWM you CAN´T enter in download mode...in this case you have one Option.
download a T/zip file WRP Recovery
and
Plug the usb cable to a computer and enter in cwm recovery
next
adb push "name of recovery".zip /sdcard
next
install the new recovery
open a terminal commando and put this:
dd if=/dev/zero of=/dev/block/platform/msm_sdcc.1/by-name/fota
Reboot
If you´re stuck in TWRP you have 2 options.
Enter in download mode and restore the firmware from LGMobile or from ADB command to restore your boot.

sorry for bad english
the same here...
I now have the stable version of Cyanogen tested install.
Supposedly he is fertig.Als Note is only: Checking if loki - fying is needed, Updating partition details ...
Otherwise Zip Install Complete
After the wipe reboot and again in TWRP.
In the file manager of TWRP is not to be understood that an installation place hätte.Den Downloadmod tried (the button is held down the top of the lens and USB cable plugged in to it) always comes only the LG logo and then again TWRP.

This helped me
http://forum.xda-developers.com/showthread.php?t=2451696

ChaseRxx said:
What you need to do to fix this
If you´re stuck in CWM you CAN´T enter in download mode...in this case you have one Option.
download a T/zip file WRP Recovery
and
Plug the usb cable to a computer and enter in cwm recovery
next
adb push "name of recovery".zip /sdcard
next
install the new recovery
open a terminal commando and put this:
dd if=/dev/zero of=/dev/block/platform/msm_sdcc.1/by-name/fota
Reboot
If you´re stuck in TWRP you have 2 options.
Enter in download mode and restore the firmware from LGMobile or from ADB command to restore your boot.
Click to expand...
Click to collapse
I don't have access to download mode. Now i don't have either access to CWM recovery. All i get when i plug it to my PC is LG logo with the error: secure booting error.
Also adb does not detect my device.
Thank you for your answer.
It seems many people have encountered the same problem with the latest fota from LG.
then my phone goes to black screen while still on.

I have this problem ;(
I have only black screen, I can't go to twrp or download mode. I can't do nothing! :<

[HELP NEEDED] HTC One M8 won't update Android 4.4.2

So I've bought this phone a year ago and I've found out recently that its rooted.
I was trying to update to 4.4.3 and stuck at (entering recovery now)..
I even tried factory reset several times and stuck at the same screen, and as a result I can't hear in-call sound and I don't know what to do anymore.
At the boot loader screen it says
*Tampered*
*unlocked*
And S-on
Any chance I can get it updated and working?? :angel:

Sam087 said:
So I've bought this phone a year ago and I've found out recently that its rooted.
I was trying to update to 4.4.3 and stuck at (entering recovery now)..
I even tried factory reset several times and stuck at the same screen, and as a result I can't hear in-call sound and I don't know what to do anymore.
At the boot loader screen it says
*Tampered*
*unlocked*
And S-on
Any chance I can get it updated and working?? :angel:
Click to expand...
Click to collapse
Flash stock recovery and try again only stock recovery can flash update not twrp,philz,cmw

sayad1 said:
Flash stock recovery and try again only stock recovery can flash update not twrp,philz,cmw
Click to expand...
Click to collapse
and how to flash stock recovery? I'm all new to this.. thanks in advance.

Sam087 said:
and how to flash stock recovery? I'm all new to this.. thanks in advance.
Click to expand...
Click to collapse
Which veriant of you mean at&t,Verizon,sprint or other ??
Do you have done setting up and&fastboot already on your desktop or laptop??

sayad1 said:
Which veriant of you mean at&t,Verizon,sprint or other ??
Do you have done setting up and&fastboot already on your desktop or laptop??
Click to expand...
Click to collapse
I have zain netwok on Unlocked HTC m8.
and yes I have adb fastboot already on my laptop

Sam087 said:
I have zain netwok on Unlocked HTC m8.
and yes I have adb fastboot already on my laptop
Click to expand...
Click to collapse
1.Put the recovery file (*. img) into a fastboot / adb folder, and open Windows Command prompt (CMD) from there.
2.Make sure the M8 drivers already installed on your computer.
3.Connect the phone into computer via USB.
Now put your phone into fastboot mode, by turning it off first, then press and hold Volume down and power button. After that, choose Fastboot mode.
5.Run the following command to CMD window:
fastboot flash recovery FileName.img
You should change the “FileName” to match with your own.
6.Now reboot system.
fastboot reboot
7.Once fully boots up, your HTC One M8 should have stock recovery, now take an OTA then apply it.
https://mega.nz/#!aAxWWTCY!TLjZ-Q9NQVGFj0GQ7AHCSxtKG-9yS5LtKsvvbS3ExBM

sayad1 said:
1.Put the recovery file (*. img) into a fastboot / adb folder, and open Windows Command prompt (CMD) from there.
2.Make sure the M8 drivers already installed on your computer.
3.Connect the phone into computer via USB.
Now put your phone into fastboot mode, by turning it off first, then press and hold Volume down and power button. After that, choose Fastboot mode.
5.Run the following command to CMD window:
fastboot flash recovery FileName.img
You should change the “FileName” to match with your own.
6.Now reboot system.
fastboot reboot
7.Once fully boots up, your HTC One M8 should have stock recovery, now take an OTA then apply it.
https://mega.nz/#!aAxWWTCY!TLjZ-Q9NQVGFj0GQ7AHCSxtKG-9yS5LtKsvvbS3ExBM
Click to expand...
Click to collapse
Thanks it worked just fine.. updating to marshmallow now

Func NO 9 (dsp image)

Please Help me...
I have already tried everything possible.
P8 lite only starts in the fastboot mode.
Error
Func NO : 9 (dsp image)
Error NO : 1 (security verify failed ! )
sorry for my english

Flash stock UPDATE.APP by putting it in the dload folder on the sd card and then holding vol- vol+ and power button to force the update.

Botar230 said:
Flash stock UPDATE.APP by putting it in the dload folder on the sd card and then holding vol- vol+ and power button to force the update.
Click to expand...
Click to collapse
not working.....
i flash system,cust,recovery,userdata,boot in fastboot
fastboot say Ok..
i flash dsp image, fastboot says error
phone starts only in rescue mode with
func no : 9 dsp image
error no : 1 security verify failed
or Fastboot mode
HELP me Please
and sorry for my english

BigH187 said:
not working.....
Click to expand...
Click to collapse
Can you give more details of how it is not working? Like does it even start to prepare update?

keikari said:
Can you give more details of how it is not working? Like does it even start to prepare update?
Click to expand...
Click to collapse
I flash all images with fastboot (many roms) fastboot say OK
cant enter Recovery or eRecovery.
push the power button, phone start in rescue mode.
nothing works ,only rescue mode and fastboot mode.

BigH187 said:
I flash all images with fastboot (many roms) fastboot say OK
cant enter Recovery or eRecovery.
push the power button, phone start in rescue mode.
nothing works ,only rescue mode and fastboot mode.
Click to expand...
Click to collapse
It should still be able to do force update or at least fail to do it. Make sure you have like >70% battery. Put UPDATE.APP in folder named dload in your sd-card and hold 'vol -, vol + and power.'

BigH187 said:
I flash all images with fastboot (many roms) fastboot say OK
cant enter Recovery or eRecovery.
push the power button, phone start in rescue mode.
nothing works ,only rescue mode and fastboot mode.
Click to expand...
Click to collapse
If your phone still boots in rescue mode, then I think the rom you've flashed is not compatible with your phone. As @up said, try to force an update.
Sent from my LG-K220 using XDA Labs

Botar230 said:
If your phone still boots in rescue mode, then I think the rom you've flashed is not compatible with your phone. As @up said, try to force an update.
Sent from my LG-K220 using XDA Labs
Click to expand...
Click to collapse
The only keyboard shortcut that works is v - and power for fastboot mode.
Ok ... and what could be the right rom?
The last Rom that worked was the slimrom Marshmallow for Ale-L21.
I believe singel sim
Thanks for help

BigH187 said:
The only keyboard shortcut that works is v - and power for fastboot mode.
Ok ... and what could be the right rom?
The last Rom that worked was the slimrom Marshmallow for Ale-L21.
I believe singel sim
Thanks for help
Click to expand...
Click to collapse
I came up with the following solution:
1. Flash TWRP (fastboot flash recovery <path>.img)
2. Type fastboot reboot and then unplug the usb cable as fast as you can and hold vol+ to boot into twrp.
3. Wipe -> Swipe to Factory Reset
4. Wipe -> Format Data
5. Download B896_update.zip
6. Advanced -> ADB Sideload -> Swipe to Start Sideload
7. adb sideload <path_to_b896>.zip
8. Once the process is finished, reboot the phone.

keikari said:
It should still be able to do force update or at least fail to do it. Make sure you have like >70% battery. Put UPDATE.APP in folder named dload in your sd-card and hold 'vol -, vol + and power.'
Click to expand...
Click to collapse
Hello, I have the same problem! I'll tell you in detail: the phone starts only in rescue mode ...
Nowhere to go just into the fast boot mode, please help me how to fix it!

(...The-PhoenixX...) said:
Hello, I have the same problem! I'll tell you in detail: The phone is loaded in mode always, after 3 buttons it is launched in the rescue mode, in recovery - the same problem! I ask to help or assist as it to correct!
Click to expand...
Click to collapse
Try this:
Botar230 said:
I came up with the following solution:
1. Flash TWRP (fastboot flash recovery <path>.img)
2. Type fastboot reboot and then unplug the usb cable as fast as you can and hold vol+ to boot into twrp.
3. Wipe -> Swipe to Factory Reset
4. Wipe -> Format Data
5. Download B896_update.zip
6. Advanced -> ADB Sideload -> Swipe to Start Sideload
7. adb sideload <path_to_b896>.zip
8. Once the process is finished, reboot the phone.
Click to expand...
Click to collapse

(...The-PhoenixX...) said:
Hello, I have the same problem! I'll tell you in detail: the phone starts only in rescue mode ...
Nowhere to go just into the fast boot mode, please help me how to fix it!
Click to expand...
Click to collapse
What were you trying to do when problem started. It probably won't do anything at your state, but have you tried to hold vol+ in fastboot mode, normally it should go to eRecovery.(not that you can do anything with it, but would be good to know)
Also try things with usb cable plugged and un-plugged this really makes difference in some cases.

keikari said:
It should still be able to do force update or at least fail to do it. Make sure you have like >70% battery. Put UPDATE.APP in folder named dload in your sd-card and hold 'vol -, vol + and power.'
Click to expand...
Click to collapse
Botar230 said:
Try this:
Click to expand...
Click to collapse
The problem is that in the recovery does not come
---------- Post added at 02:42 PM ---------- Previous post was at 02:38 PM ----------
keikari said:
It should still be able to do force update or at least fail to do it. Make sure you have like >70% battery. Put UPDATE.APP in folder named dload in your sd-card and hold 'vol -, vol + and power.'
Click to expand...
Click to collapse
keikari said:
What were you trying to do when problem started. It probably won't do anything at your state, but have you tried to hold vol+ in fastboot mode, normally it should go to eRecovery.(not that you can do anything with it, but would be good to know)
Also try things with usb cable plugged and un-plugged this really makes difference in some cases.
Click to expand...
Click to collapse
I uninstalled the firmware before the problem happened!
the loader is unlocked

(...The-PhoenixX...) said:
The problem is that in the recovery does not come
Click to expand...
Click to collapse
The recovery does not come? What do you mean?
My solution works only on P8 lite 2015 (that's the op's phone model).

(...The-PhoenixX...) said:
I uninstalled the firmware before the problem happened!
the loader is unlocked
Click to expand...
Click to collapse
How exactly you did it? That should never be necessary or good idea to do.(Unless you are only wiping partitions in recovery.)

Hey ... I've tried everything here and in other forums. No matter what I tried I can only boot the fastboot mode.
What the hell is actually a dsp.img?

BigH187 said:
Hey ... I've tried everything here and in other forums. No matter what I tried I can only boot the fastboot mode.
What the hell is actually a dsp.img?
Click to expand...
Click to collapse
I also have this problem

I got this error trying to change my data to f2fs and install MorfuZ V3.4
spend all afternoon without finding solutions
dload in microsd don't work i try with 4 firmwares
any help please?:crying:

...i try to flash ROM_MORFUZ_3.4_EMUI8_HONOR8LITE_BY_CATUVA21.ZIP
...now Can't recovery, can't fastboot...
Huawei Multi Tool don't runs
Huawei P8 lite ALE L21

EgonsS said:
...i try to flash ROM_MORFUZ_3.4_EMUI8_HONOR8LITE_BY_CATUVA21.ZIP
...now Can't recovery, can't fastboot...
Huawei Multi Tool don't runs
Huawei P8 lite ALE L21
Click to expand...
Click to collapse
The rom you've flashed is not compatible with P8 lite 2015. Unfortunately, you've probably hardbricked your phone - there is no way to fix it.