help me my core prime sm-361f is stucked at finishing boot i try flashing many time but no luck!!!
Jeniljp said:
help me my core prime sm-361f is stucked at finishing boot i try flashing many time but no luck!!!
Click to expand...
Click to collapse
Is it bootloop or soft brick...?
Try
Wipe cache
Wipe data
Wipe dalvik
It might work
$!n$ter said:
Is it bootloop or soft brick...?
Try
Wipe cache
Wipe data
Wipe dalvik
It might work
Click to expand...
Click to collapse
i try already but dosent working!!!:crying:
$!n$ter said:
Is it bootloop or soft brick...?
Try
Wipe cache
Wipe data
Wipe dalvik
It might work
Click to expand...
Click to collapse
Is it rooted??
Did you flash any kernel or rom recently?
Jeniljp said:
help me my core prime sm-361f is stucked at finishing boot i try flashing many time but no luck!!!
Click to expand...
Click to collapse
try to flash a stock rom using odin
Related
MY mytouch 4g keeps being stuck at the first screen when i load a rom, this never happened before. I have tried flashing other roms but its still the same problem...
I wipe data/cache and dalvik cashe too...
Rite now im stuck with my backup stock rom.....
PLease help!
Tarrance17 said:
MY mytouch 4g keeps being stuck at the first screen when i load a rom, this never happened before. I have tried flashing other roms but its still the same problem...
I wipe data/cache and dalvik cashe too...
Rite now im stuck with my backup stock rom.....
PLease help!
Click to expand...
Click to collapse
are you checking the MD5SUMs?
i am a newbie but i tried flashing a couple diff ROMs after using GFREE to root my MT4G..
you wiped out your DATA, Cache Partitiion and Dalvik Cashe after reboot into recovery.. hmm.. try wipe out the data again.. read somewhere it was an option to wipe it out again to ensure its clear.. that might help
maybe the ROM your installing is bad.. try a different one that you know works?
thought the engineering bootloader installed prevents situations like this..
Whats the md5sums and how do i check it?
Recently my D800 has been acting up with random freezing then rebooting, to horrible battery life. I am so close to resorting to a factory reset but decided maybe wiping the cache and dalvik may fix the issue. My question is, with being stock rooted with TWRP installed, is it safe to just boot into TWRP, wipe cache/Dalvik, then reboot? Or is it only necessary when flashing new ROMS/kernels etc.?
Thank you!
Jelly
jellybear456 said:
Recently my D800 has been acting up with random freezing then rebooting, to horrible battery life. I am so close to resorting to a factory reset but decided maybe wiping the cache and dalvik may fix the issue. My question is, with being stock rooted with TWRP installed, is it safe to just boot into TWRP, wipe cache/Dalvik, then reboot? Or is it only necessary when flashing new ROMS/kernels etc.?
Thank you!
Jelly
Click to expand...
Click to collapse
Wiping cache and davlik is 100% safe I wipe regularly....
RubbleTea said:
Wiping cache and davlik is 100% safe I wipe regularly....
Click to expand...
Click to collapse
Haha thank you very much, sir.:good:
jellybear456 said:
Haha thank you very much, sir.:good:
Click to expand...
Click to collapse
NP hope that fixes it
RubbleTea said:
NP hope that fixes it
Click to expand...
Click to collapse
Just wiped cache/dalvik cache. I shall post an update once I get a full day's use out of it to see if the freezes stop and battery life increases. If not, looks like i'll be factory resetting. thanks again!
Anyone help me please... i flash the hyperion 9 Gm build... but i stuck at start up screen 'Samsung galaxy y gt s5360' ... i wait for 20minute at that start up screen... nothing happen...my previous rom is hyperion 8 final gm build with hell lock kernel...
#Sorry for bad english
EpullSalvatrucha said:
Anyone help me please... i flash the hyperion 9 Gm build... but i stuck at start up screen 'Samsung galaxy y gt s5360' ... i wait for 20minute at that start up screen... nothing happen...my previous rom is hyperion 8 final gm build with hell lock kernel...
#Sorry for bad english
Click to expand...
Click to collapse
have u wipe data/cache .
Sent from xda-app using smartphone
EpullSalvatrucha said:
Anyone help me please... i flash the hyperion 9 Gm build... but i stuck at start up screen 'Samsung galaxy y gt s5360' ... i wait for 20minute at that start up screen... nothing happen...my previous rom is hyperion 8 final gm build with hell lock kernel...
#Sorry for bad english
Click to expand...
Click to collapse
Make a full wipe :
Go to mounts and storage :
Format system,data,cache
mount them
Flash
Wipe data and cache
Reboot
Sent from my GT-S5360 using Tapatalk 2
mohamedrashad said:
Make a full wipe :
Go to mounts and storage :
Format system,data,cache
mount them
Flash
Wipe data and cache
Reboot
Sent from my GT-S5360 using Tapatalk 2
Click to expand...
Click to collapse
He/She was right
Sent From My Samsung Galaxy Y s5360
Just flash via odin and flash the rom again
make full wipe
I have make full wipe... but the result still same... flash via odin first? better i use other rom... this hyperion9 is so complicated... btw i dont have pc to flash odin...
Lemon_Lime`s said:
have u wipe data/cache .
Sent from xda-app using smartphone
Click to expand...
Click to collapse
alredy done it... not working...
EpullSalvatrucha said:
alredy done it... not working...
Click to expand...
Click to collapse
To flash stock based rom is very easy just:
Go to Cwm
Wipe everything
Mount everything
Flash the rom file
Wipe everything again
Reboot
No no no
Only dont flash the patch u will boot up
myaservip said:
No no no
Only dont flash the patch u will boot up
Click to expand...
Click to collapse
Sorry sir... I dont understand... can you explain more and leave me the download link...
EpullSalvatrucha said:
Sorry sir... I dont understand... can you explain more and leave me the download link...
Click to expand...
Click to collapse
Basically you should always flash a custom ROM on a stock one,
so flash a stock samsung ROM (make sure there is no secured bootloader etc...)
then wipe and install, i always do that :good:
Have you mounted /system?
Sent from my GT-S5360 using Tapatalk 2
shyamSGY said:
Have you mounted /system?
Sent from my GT-S5360 using Tapatalk 2
Click to expand...
Click to collapse
yes... but still not working... stuck at samsung galaxy y gts5360 screen... seem that hyperion9 very complicated than other rom...
ok here how i install hyperion9:-
reboot to recovery(cwm)
mount system/data/cache
wipe dalvik cache
wipe baterystat
wipe data
wipe cache
install zip from sdcard
install HYPERION-09.DXMJ1.GM FINAL.BUILD
reboot
Help please... i want try how hyperion9...
EpullSalvatrucha said:
yes... but still not working... stuck at samsung galaxy y gts5360 screen... seem that hyperion9 very complicated than other rom...
ok here how i install hyperion9:-
reboot to recovery(cwm)
mount system/data/cache
wipe dalvik cache
wipe baterystat
wipe data
wipe cache
install zip from sdcard
install HYPERION-09.DXMJ1.GM FINAL.BUILD
reboot
Help please... i want try how hyperion9...
Click to expand...
Click to collapse
if you followed your instructions the rom wont boot
you need to mount system data cache after you have wiped system data cache so it should be the following
wipe data
wipe system
wipe cache
mount data
mount system
mount cache
install zip from sd
select rom zip
restart
I mean the patch provided by carl dont flash it
Hyperion 9 stuck
myaservip said:
I mean the patch provided by carl dont flash it
Click to expand...
Click to collapse
I had the same issue with the first version, restored previous version,hyperion 7.x, waited installed hyperion 9 dev 3. This one installed ok, boots normally, only imei isnt showing.
Greets Peter
PBakker said:
I had the same issue with the first version, restored previous version,hyperion 7.x, waited installed hyperion 9 dev 3. This one installed ok, boots normally, only imei isnt showing.
Greets Peter
Click to expand...
Click to collapse
Maybe you can use hyperion ril fix...
myaservip said:
I mean the patch provided by carl dont flash it
Click to expand...
Click to collapse
Yes... i not flash the patch... but its still not working...
marcussmith2626 said:
if you followed your instructions the rom wont boot
you need to mount system data cache after you have wiped system data cache so it should be the following
wipe data
wipe system
wipe cache
mount data
mount system
mount cache
install zip from sd
select rom zip
restart
Click to expand...
Click to collapse
Wipe system? where can i find it? if wipe system is format system, i do it... but not working...
EpullSalvatrucha said:
Wipe system? where can i find it? if wipe system is format system, i do it... but not working...
Click to expand...
Click to collapse
you still need to mount system data cache after you have formatted it
you also need to be on a stock based kernel
9 time out of 10 if its not booting its due to user error
The only other thing that would stop it booting is an incompatible baseband but I assume you are on a recent one and therefore should have no problems
How do I flash from L To a custom AOSP KITKAT？ Do I need to flash the factory image at first or I just boot into recvoery and flash the cutom rom?Did anybody know? THX!
To be safe, you'd do a factory image flash. That way you know you have a good starting point. There's the boot image, including the ramdisk, and radio (depending on what platform you're running on) that would have changed.
Or, if you're feeling lucky, clean wipe and flash your new ROM. What's the worse case scenario? You have to do it twice.
siaga said:
How do I flash from L To a custom AOSP KITKAT？ Do I need to flash the factory image at first or I just boot into recvoery and flash the cutom rom?Did anybody know? THX!
Click to expand...
Click to collapse
The safest way is
Download L port
factory reset once
wipe cache dalvik
flash ROM
wipe cache and dalvik again
reboot
done,
Gapps included.
I never got problem with these steps.
Rohit02 said:
The safest way is
Download L port
factory reset once
wipe cache dalvik
flash ROM
wipe cache and dalvik again
reboot
done,
Gapps included.
I never got problem with these steps.
Click to expand...
Click to collapse
no need to format storage?
thanks in advanced
Rohit02 said:
The safest way is
Download L port
factory reset once
wipe cache dalvik
flash ROM
wipe cache and dalvik again
reboot
done,
Gapps included.
I never got problem with these steps.
Click to expand...
Click to collapse
Hey,guys,I have just ask the L's developer ,he said that the L he developed uses the same baseband and bootloader as the Kitkat,so there is no need to flash a factory image at first , instead ,we can just directly flash the Kitkat aosp ,Thanks for his kindness!
qaz2453 said:
no need to format storage?
thanks in advanced
Click to expand...
Click to collapse
That's what he meant. Format system and data. You'll find that option on the custom recovery.
qaz2453 said:
no need to format storage?
thanks in advanced
Click to expand...
Click to collapse
You just need to get a flashable one and your good to go. Just wipe system, data and caches and flash it. I tried both ways by recovery and by script and its the same experience. But if you follow the script and flash through PC you'll surely lose all your data.
I have a weird issue with my N9005 (hlte). I just got it new and am still a little inexperienced with flashing it. Preblem occurs when flashing ANY CM12 based rom. Flashing works well with TWRP 2.8.5.0 but once Android booted just after enetring my PIN the display turns off and I can't do anything and have to hard reboot my phone. CM11 runs without any issues
I'd relly like to go for CM12 so any help will be appreciated.
LS.xD said:
I have a weird issue with my N9005 (hlte). I just got it new and am still a little inexperienced with flashing it. Preblem occurs when flashing ANY CM12 based rom. Flashing works well with TWRP 2.8.5.0 but once Android booted just after enetring my PIN the display turns off and I can't do anything and have to hard reboot my phone. CM11 runs without any issues
I'd relly like to go for CM12 so any help will be appreciated.
Click to expand...
Click to collapse
Did you wipe data and cache? After installation
kenny1991 said:
Did you wipe data and cache? After installation
Click to expand...
Click to collapse
I performed a full wipe before flashing. Any advantages wiping again, once flashed?
LS.xD said:
I performed a full wipe before flashing. Any advantages wiping again, once flashed?
Click to expand...
Click to collapse
If you read installation instructions from temasek it says clear dalvik and cache. For good measure. No full wipe after flash. Only cache and dalvik
If i full wipe my phone after flashing ... i got no System at all ...
It looks like -> this <-
e1n3r said:
If i full wipe my phone after flashing ... i got no System at all ...
It looks like -> this <-
Click to expand...
Click to collapse
Lol
Haha I did correct myself and told you to not full wipe after flash. Only do that before flashing. Wipe dalvik cache and cache after flashing.
Do a clean install and try again. Full system, data wipe and caches in recovery. Use twrp doing that. Then flash and wipe cache and dalvik. Reboot. Use the latest build 8.7
kenny1991 said:
Lol
Haha I did correct myself and told you to not full wipe after flash. Only do that before flashing. Wipe dalvik cache and cache after flashing.
Do a clean install and try again. Full system, data wipe and caches in recovery. Use twrp doing that. Then flash and wipe cache and dalvik. Reboot. Use the latest build 8.7
Click to expand...
Click to collapse
Yes Sir thats the way i do any time look my Video there is no full wipe after Install only Cache, Dalvik (Factory reset)
greets