Semi brick, firehose loop - OnePlus 2 Q&A, Help & Troubleshooting

Today I tried installing the new Paranoid Android but something went wrong during first boot and I am now the proud owner of a oneplus semi-brick. It seems to start and briefly shows the oneplus logo, then goes black, however, when plugged into my pc I can see it in the device manager.
I tried the Qualcomm unbrick guide but the downloadtool just puts the phone into a boot loop, briefly showing the logo before it reboots, again and again.
What else can I do?

Can you boot into fastboot?

evertking said:
Can you boot into fastboot?
Click to expand...
Click to collapse
No. When I try it just freezes when the fastboot text appears.
No access to recovery neither.

Related

I cancelled KDZ Stock rom flash

I have done the most dumb thing in the world, lg flashtool2014 was flashing my phone, it blocked at a certain moment, i clicked on exit.... now i have LG Logo and nothing else, not recognized by pc, nothing
Follow this
http://forum.xda-developers.com/lg-g2/general/choise-unbrick-qhsusbbulk-qualcomm-9006-t3093844/page1
Thank you i'll give this a try
UPDATE: Phone stuck on lg logo and pc not recognizing it, the screen doesn't go black after the lg logo so it's not in QHUSB_Bulk mode is there any solution to make the phone go into qhusb?
Kicha0 said:
UPDATE: Phone stuck on lg logo and pc not recognizing it, the screen doesn't go black after the lg logo so it's not in QHUSB_Bulk mode is there any solution to make the phone go into qhusb?
Click to expand...
Click to collapse
Which partitions did you flash with that tool?
I can't flash anything i'm just stuck at lg logo without the LED thing, and not recognized by pc, i can only get into stock recovery which does absolutely nothing
UP anyone? i'm so desperate :/

How to get out of bootloop? D:

Hey, so I have managed to get stuck into a bootloop when installing xposed framework (I think that's what caused it, at least.)
and I have no idea how to get out of it, could somebody help, I'm a little skeptical if I'm bricked, but as far as I know I am bootlooped as the LG logo repeats itself.
SheepSaysBaah said:
Hey, so I have managed to get stuck into a bootloop when installing xposed framework (I think that's what caused it, at least.)
and I have no idea how to get out of it, could somebody help, I'm a little skeptical if I'm bricked, but as far as I know I am bootlooped as the LG logo repeats itself.
Click to expand...
Click to collapse
If you have the TWRP installed just boot in TWRP and flash the uninstaller, and after that a stock rom.
Otherwise you can install the TWRP by booting into fastboot mode (keep pressed vol- and connect the phone to the PC), or flash the original firmware trough LGUP+Uppercut by booting in download mode (keep pressed vol+ and connect the phone to the PC)
SheepSaysBaah said:
Hey, so I have managed to get stuck into a bootloop when installing xposed framework (I think that's what caused it, at least.)
and I have no idea how to get out of it, could somebody help, I'm a little skeptical if I'm bricked, but as far as I know I am bootlooped as the LG logo repeats itself.
Click to expand...
Click to collapse
This bootloop is common in the LG G6, wait 10-15 min (like 3 or 4 reboots) and you will see that the phone boots properly.
There is no information to explain why this happens, but after the first boot the following boots will be normal.
When uninstalling through uninstaller zip happens the same.
mprovi_15 said:
This bootloop is common in the LG G6, wait 10-15 min (like 3 or 4 reboots) and you will see that the phone boots properly.
There is no information to explain why this happens, but after the first boot the following boots will be normal.
When uninstalling through uninstaller zip happens the same.
Click to expand...
Click to collapse
This was my experience. After rooting and the first shutdown, I went to power on and bootloop occurred. While searching for answers, I found this thread and while reading this, the G6 was bootlooping between the bootloader unlocked warning and LG splash screen. While here, it had looped about 8 times and it finally just booted up.

Help with unbricking?

Flashed A2017G_B10_NOUGAT_FULL_EDL, after that the phone boots up, zte logo, then for a second or less I see a android laying on its back like diagnostic or something, and after that the phone just shuts off. I can boot in EDL as COM20, idk if that is normal. Recovery doesn't boot.
I flashed it with MiFlash
So I recorded the phone in slowmotion, and there is a android with error sign and No Command error

Nexus 6p, Bootloop and can't access Recovery

So the whole situation :
I was using Google Experience Rom (Android 10). I turned off my cellphone to charge, It restarted but stuck on charging logo. So I forced fully restarted it. and from that moment it goes to Google Logo, Stuck for second to two and then restarted. I tried flashing TWRP, TWRP-fbe, and TWRP 4 cores but when i select recovery from Bootloader it again goes to Google Logo and restart. I also tried to flash stock rom but same issue.
Kindly need help.
Sharjeel_97 said:
So the whole situation :
I was using Google Experience Rom (Android 10). I turned off my cellphone to charge, It restarted but stuck on charging logo. So I forced fully restarted it. and from that moment it goes to Google Logo, Stuck for second to two and then restarted. I tried flashing TWRP, TWRP-fbe, and TWRP 4 cores but when i select recovery from Bootloader it again goes to Google Logo and restart. I also tried to flash stock rom but same issue.
Kindly need help.
Click to expand...
Click to collapse
If you flashed stock rom and still couldn't boot you likely have the BLOD. Did you try the TWRP found in the link below? If so and you still can't boot into that recovery your phone is likely dead, unfortunately.
https://forum.xda-developers.com/nexus-6p/general/bootloop-death-blod-workaround-zip-t3819515

bricked - any way to recover?

hi,
long story short, but ****load of mishaps later I have a brick.
Recovery deosn't boot - starts booting then restarts again.
OS doesn't boot - gets stuck on booting logo.
Flash mode doesn't work either - boots into flash mode, but when I connect to USB I get "unknown device" and that's it.
Anything else possible to do?
mrQQ said:
hi,
long story short, but ****load of mishaps later I have a brick.
Recovery deosn't boot - starts booting then restarts again.
OS doesn't boot - gets stuck on booting logo.
Flash mode doesn't work either - boots into flash mode, but when I connect to USB I get "unknown device" and that's it.
Anything else possible to do?
Click to expand...
Click to collapse
Service center might be the solution

Categories

Resources