My phone doesnt boot - Galaxy Y GT-S5360 and Duos 6102 Q&A, Help & Troubl

I recently flashed my phone with odin, but now when i try to turn it on, it just turns a brighter grey colour and stays like that.
Is there a way to stop this?
Edit: I think i flashed the wrong firmware, Does anyone know any advice on how to get my phone to work?

Can you go Download Mode? if not try switching new batteries, mostly deadboot problems 'cause by battery

I can go into download mode but when i try to do another odin flash it says this:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> PDA_S5360_XXMI1.tar.md5 is valid.
<OSM> MODEM_S5360_XXMG1.tar.md5 is valid.
<OSM> CSC_S5360_XEUMI1.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> boot.img
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)

try downloading another firmware your region's and make sure the USB cord is fine
when you've extracted the firmware package...
CSC_S5360_XEUMI1.tar.md5 is different from others...

Related

re flash stock rom help gt-i9505 uk

hello iam having a bit of trouble trying to get my phone working its currently stuck on firmware upgrade encountered an issue etc etc when i press power button, ive tryed to re flash with ODIN3 about 10 x all failed here the results ...any help please guys.....
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9505XXUBMGA_I9505OXXBMG3_I9505XXUBMGA_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Set PIT file..
<ID:0/006> DO NOT TURN OFF TARGET!!
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads complet
someone please help
SAMGS4 said:
hello iam having a bit of trouble trying to get my phone working its currently stuck on firmware upgrade encountered an issue etc etc when i press power button, ive tryed to re flash with ODIN3 about 10 x all failed here the results ...any help please guys.....
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9505XXUBMGA_I9505OXXBMG3_I9505XXUBMGA_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Set PIT file..
<ID:0/006> DO NOT TURN OFF TARGET!!
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads complet
Click to expand...
Click to collapse
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9505XXUBMGA_I9505OXXBMG3_I9505XXUBMGA_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Set PIT file..
<ID:0/006> DO NOT TURN OFF TARGET!!
<ID:0/006> Removed!!
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I'd try downloading a new firmware to see if you get the same issue. I've always used a pre-rooted Odin flashable ROM and have had no problems
http://forum.xda-developers.com/showthread.php?t=2250824
I'd make sure your PC has the latest version of the Sammy drivers and Odin before flashing aswell.
Hope this helps.
someone please help
symondo12 said:
i'd try downloading a new firmware to see if you get the same issue. I've always used a pre-rooted odin flashable rom and have had no problems
http://forum.xda-developers.com/showthread.php?t=2250824
i'd make sure your pc has the latest version of the sammy drivers and odin before flashing aswell.
Hope this helps.
Click to expand...
Click to collapse
ive tryed loads roms keeps failing
someone please help
PHONE SEEMS TO DISCONNECT HAS ANYONE ELSE HAD SAME PROBLEM??
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9505XXUBMEA_I9505H3GBME3_I9505XXUBMEA_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Removed!!
<ID:0/005> Set PIT file..
<ID:0/005> DO NOT TURN OFF TARGET!!
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
heres the error im geting
Try Odin3-v1.85.exe

samsung galaxy s4 in soft brick impossible to flash with odin

hi everybody,
i changed my cyanogenmod 11 in samy deluxe, ilost my imei so to restore iti tried to flash stockbut someting gone wrong. im now in soft brick, i tried toflash again but thats the error:
Code:
[CODE]<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9505XXUDMHB_I9505ITVDMI2_I9505XXUDMHB_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Can't open the specified file. (Line: 2564)
<ID:0/003> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/003> Removed!!
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9505XXUDMHB_I9505ITVDMI2_I9505XXUDMHB_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Can't open the specified file. (Line: 2564)
<ID:0/003> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9505XXUDMHB_I9505ITVDMI2_I9505XXUDMHB_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Complete(Write) operation failed.
<ID:0/003> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9505XXUDMHB_I9505ITVDMI2_I9505XXUDMHB_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Complete(Write) operation failed.
<ID:0/003> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9505XXUBMGA_I9505OXXBMG3_I9505XXUBMGA_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Complete(Write) operation failed.
<ID:0/003> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
[/CODE]
i attach whats happen in my phone, i really don't what to do... pease help me....
p.s. i used odin v. 3.04 and 3.07 with the same result, mydevice is gs4 i9505
If you are on the new bootloader you cannot flash those ancient firmwares. You need one based on 4.4.2.
- Different usb port
- Run as admin
- Different usb cable
or just flash the custom recovery and flash a custom rom that you want.
Lennyz1988 said:
If you are on the new bootloader you cannot flash those ancient firmwares. You need one based on 4.4.2.
- Different usb port
- Run as admin
- Different usb cable
or just flash the custom recovery and flash a custom rom that you want.
Click to expand...
Click to collapse
i have to install stock because i dont have efs file....... ive tried what you said..... now i downloaded from sammobile thelatest firmware but i don't know if it will work....
is there a writing protection? is that a problem?
Trinity94 said:
i have to install stock because i dont have efs file....... ive tried what you said..... now i downloaded from sammobile thelatest firmware but i don't know if it will work....
is there a writing protection? is that a problem?
Click to expand...
Click to collapse
No.
i tried to flash autoroot and it works!!!! now i have to restore imei... if i flash stock rom imei will be restored automatically???

[Q] Cricket sasmung s4 bricked HELP!!

Alright so I bricked my s4 while rooting it, It says something happened when updating the firmware, I did what people said use odin and flash to stock but i keep getting the error
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> R970CVVUFNC6_R970CCRIFNC6_R970CVVUFNC6_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/003> Removed!!
<ID:0/003> Added!!
If anyone could help that would be great!
arkk431 said:
Alright so I bricked my s4 while rooting it, It says something happened when updating the firmware, I did what people said use odin and flash to stock but i keep getting the error
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> R970CVVUFNC6_R970CCRIFNC6_R970CVVUFNC6_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/003> Removed!!
<ID:0/003> Added!!
If anyone could help that would be great!
Click to expand...
Click to collapse
Hi,
What stock you had and what stock rom are you trying to flash?
also check this thread
http://forum.xda-developers.com/showthread.php?t=2265477
Its the stock file for the cricket schr970c and that threads for model specific only.
arkk431 said:
Its the stock file for the cricket schr970c and that threads for model specific only.
Click to expand...
Click to collapse
Sorry mate
i did not realice you had an S4 cricket , the thread i gave you is not for your device..

SGH-i337M Virgin Mobile

1. Rooted via Towelroot on 4.3, then when new OTA update came up i just clicked on install and it went through fine, another update came up 4.4.2 and i clicked on update went through fine, now 5.0.1 came out when i clicked on update went through up to 28% and then said failed,
Now stuck on Firmware having issue connect to Kies which i did but indicated failed
Then i connected via Odin,
Files i got was ( MF3 TARs )
Placed the phone on downloading mode
Tried didn't go through asking for PIT so i found a file loaded
still no go
Log from Odin:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> BOOTLOADER_I337UCUAMF3_812098_REV06_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> PLATFORM_I337UCUAMF3_812098_REV06_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> MODEM_I337UCUAMF3_812098_REV06_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CSC_ATT_I337ATTAMF3_812098_REV06_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Removed!!
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Removed!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/003> Removed!!
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Removed!!
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/003> Removed!!
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Removed!!
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse

[Q] Odin: Need i9505 Pit File

Hey Guys,
please help me, i just bricked my phone i cant boot in Rom/Recovery, only in Download Modus i can boot, but when i want to reflash a recovery (Like TWRP) it says:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM>I9505XXUHOF2_I9505OXAHOF2_DBT.tar.md 5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/003> Added!!
So i downloaded an older i9505 PIT File and tried it again, but then this comes:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9505XXUHOF2_I9505OXAHOF2_DBT.tar.md 5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Samsung Galaxy S4 GT-i9505 - Android 5.01
Im using Odin v 3.09
Firmware: Germany
So i think i need a PIT File for my Version of Firmware: (Newest)I9505XXUHOF2_I9505OXAHOF2_DBT
I dont know if Im right...
Thanks for Help!
lolmann101 said:
Thanks for Help!
Click to expand...
Click to collapse
Use other USB cable or the original of Samsung.
Joku1981 said:
Use other USB cable or the original of Samsung.
Click to expand...
Click to collapse
Hello,
I tried it with the original S4 cable & with some others (HTC, NoName, etc.). It doesnt work!
lolmann101 said:
Hello,
I tried it with the original S4 cable & with some others (HTC, NoName, etc.). It doesnt work!
Click to expand...
Click to collapse
Then other USB port.
Zipped and attached PIT file for I9505XXUHOF2_I9505OXAHOF2_DBT
Downloaded directly from Samsung Kies.

Categories

Resources