Related
Hi everyone! how are you?
Im glad to hear that we can upgrate our note 4 to lollipop (for H version).
Im really worried about do something wrong to get lollipop. Actualy, i have the V6 sweet custom rom for the C variant (whereas i have the H version).
What i have to do to get lollipop? One friend told me that the only thing i just do its make full wipes, and install the stock rom in odin.
thats all?
Please, help me... I really want to get lollipop and i dont want to brick my phone!.
thanks!
aguu352 said:
Hi everyone! how are you?
Im glad to hear that we can upgrate our note 4 to lollipop (for H version).
Im really worried about do something wrong to get lollipop. Actualy, i have the V6 sweet custom rom for the C variant (whereas i have the H version).
What i have to do to get lollipop? One friend told me that the only thing i just do its make full wipes, and install the stock rom in odin.
thats all?
Please, help me... I really want to get lollipop and i dont want to brick my phone!.
thanks!
Click to expand...
Click to collapse
There's no way to hardbrick your device by just flashing a rom with odin. I even could say that you can flash the N910H rom via odin without any kind of wipes over SweetRom which is almost the same build and the device would boot normally (some bugs might be appear here and there).
If you want to clean flash the new N910H firmware, head into CWM/TWRP and wipe data, cache and system, then put it in download mode and flash the firmware via odin.
Don't worry, just wipe everything I said earlier and flash it via odin. Should work fine without bugs.
Abrazo!
galaxynote2 said:
There's no way to hardbrick your device by just flashing a rom with odin. I even could say that you can flash the N910H rom via odin without any kind of wipes over SweetRom which is almost the same build and the device would boot normally (some bugs might be appear here and there).
If you want to clean flash the new N910H firmware, head into CWM/TWRP and wipe data, cache and system, then put it in download mode and flash the firmware via odin.
Don't worry, just wipe everything I said earlier and flash it via odin. Should work fine without bugs.
Abrazo!
Click to expand...
Click to collapse
thanks bro!!! i was scared of that, because... DK, its a very expensive phone haha... the sweet rom its KK (4.4.4)
OK, so, recovery / full wipes/ downloading / flash lollipop.
thats all?
thanks, thanks!!!
aguu352 said:
thanks bro!!! i was scared of that, because... DK, its a very expensive phone haha... the sweet rom its KK (4.4.4)
OK, so, recovery / full wipes/ downloading / flash lollipop.
thats all?
thanks, thanks!!!
Click to expand...
Click to collapse
Well I thought you were using SweetRom 5.0.1 (N910C version), but if it's kiktat then you will need to do full wipes first obligatory, then flash LP. Enjoy!
galaxynote2 said:
Well I thought you were using SweetRom 5.0.1 (N910C version), but if it's kiktat then you will need to do full wipes first obligatory, then flash LP. Enjoy!
Click to expand...
Click to collapse
that´s why im very scared....
Porque no hablamos en español ya que los dos somos Argentinos? jaja.
no tengo que cambiar el bootloader o los modems al pasar de custom kk a stock lollipop??
aguu352 said:
that´s why im very scared....
Porque no hablamos en español ya que los dos somos Argentinos? jaja.
no tengo que cambiar el bootloader o los modems al pasar de custom kk a stock lollipop??
Click to expand...
Click to collapse
No porque te borran el comentario si no esta en inglés o no ponés la traducción abajo. No debería ser necesario cambiar el bootloader o los modems ya que vienen de por sí integrados en el archivo que bajaste para meterlo por odin. Si bajaste la rom oficial (stock) que se flashea por odin (normalmente .tar o tar.md5), tan sólo tenes que hacer todos los wipes necesarios y instalarla por odin. Yo lo hice con mi viejo N7000 cuando pasé de ICS a Jelly Bean, y lo volví a hacer con mi N910C cuando pase de Kitkat a Lollipop, es así en todos los telefonos Galaxy, si pasas de una custom rom a una stock con android superior el único paso intermedio es hacer los wipes necesarios. No te hagas drama, no se va a cag*r y si pasa algo siempre podes volver a la version anterior.
Es un teléfono caro (y más si adquiriste la versión LTE como yo) pero creeme que no vas a tener drama.
Si queres quedarte mas tranquilo de que todo va a salir bien comprobá que tengas batería suficiente y la rom se haya bajado correctamente.
Translation: We can't speak in other language rather than english if we don't put a translation below. It shouldn't be necessary to change the bootloader or modems because they're integrated with the md5 package you downloaded. If you downloaded a tar.md5 package for odin, you only need to do the necessary wipes and flash Lollipop via odin. I did the same with my old N7000 and my N910C, it's the same in every Galaxy device out there. If you need to upgrade from a custom rom to a stock rom with a newer android version the only intermediate step is wipe everything. Dont worry, you will not mess up anything. If you do, remember that you can go to the older version to revert the changes.
Suerte!/Good Luck!
galaxynote2 said:
No porque te borran el comentario si no esta en inglés o no ponés la traducción abajo. No debería ser necesario cambiar el bootloader o los modems ya que vienen de por sí integrados en el archivo que bajaste para meterlo por odin. Si bajaste la rom oficial (stock) que se flashea por odin (normalmente .tar o tar.md5), tan sólo tenes que hacer todos los wipes necesarios y instalarla por odin. Yo lo hice con mi viejo N7000 cuando pasé de ICS a Jelly Bean, y lo volví a hacer con mi N910C cuando pase de Kitkat a Lollipop, es así en todos los telefonos Galaxy, si pasas de una custom rom a una stock con android superior el único paso intermedio es hacer los wipes necesarios. No te hagas drama, no se va a cag*r y si pasa algo siempre podes volver a la version anterior.
Es un teléfono caro (y más si adquiriste la versión LTE como yo) pero creeme que no vas a tener drama.
Si queres quedarte mas tranquilo de que todo va a salir bien comprobá que tengas batería suficiente y la rom se haya bajado correctamente.
Translation: We can't speak in other language rather than english if we don't put a translation below. It shouldn't be necessary to change the bootloader or modems because they're integrated with the md5 package you downloaded. If you downloaded a tar.md5 package for odin, you only need to do the necessary wipes and flash Lollipop via odin. I did the same with my old N7000 and my N910C, it's the same in every Galaxy device out there. If you need to upgrade from a custom rom to a stock rom with a newer android version the only intermediate step is wipe everything. Dont worry, you will not mess up anything. If you do, remember that you can go to the older version to revert the changes.
Suerte!/Good Luck!
Click to expand...
Click to collapse
aaah, i didnt know that! (about the language).
But, i dont have the LTE version... only the rom. I have the H version...
It´s the same? I´ll do that!
thanks bro for all...really
aguu352 said:
aaah, i didnt know that! (about the language).
But, i dont have the LTE version... only the rom. I have the H version...
It´s the same? I´ll do that!
thanks bro for all...really
Click to expand...
Click to collapse
It' s the same in every Galaxy device, even in your N910H! Don't worry you will not mess anything, just do it and your phone will boot up with Lollipop after 10 minutes aprox.
You're welcome!
galaxynote2 said:
It' s the same in every Galaxy device, even in your N910H! Don't worry you will not mess anything, just do it and your phone will boot up with Lollipop after 10 minutes aprox.
You're welcome!
Click to expand...
Click to collapse
my friend! i f***d up!!!
when it was near to finish the odin process. told me "FAIL!"
now i cant start the phone!!!!!
what can i do!! ????
aguu352 said:
my friend! i f***d up!!!
when it was near to finish the odin process. told me "FAIL!"
now i cant start the phone!!!!!
what can i do!! ????
Click to expand...
Click to collapse
Seems like a problem with odin, not the device. Answering you to PM so we can talk easier.
Finally, today I was able to execute the system upgrade to my Moto Maxx. The mobile was never modified, it was bought at retail store and has been used with Telcel carrier in México. In the next posts I will share the screen captures of download and upgrade process.
First I will share the official announcement from Motorola about Marshmallow upgrade release for Moto Maxx in Latam
https://motorola-global-es-latam.cu...detail/a_id/110573/p/30,6720,9278/reg/3103597
The notice was posted last Sunday, July 17th of 2016. Since then, I wasn't able to get the upgrade option until Tuesday, July 19th at 5 pm CST.
Hi ddaza.
Alguna idea de como actulizar si tenía mi cel en Root (bootloader). Porque actualmente me manda error por este motivo ...
Gracias!
VictorBenitez said:
Hi ddaza.
Alguna idea de como actulizar si tenía mi cel en Root (bootloader). Porque actualmente me manda error por este motivo ...
Gracias!
Click to expand...
Click to collapse
Si tenías root tienes que esperar a que salga el firmware completo
O regresar al firmware completo anterior y aplicar la actualiAcion ...
Enviado desde mi Nexus 6P mediante Tapatalk
gierso said:
Si tenías root tienes que esperar a que salga el firmware completo
O regresar al firmware completo anterior y aplicar la actualiAcion ...
Enviado desde mi Nexus 6P mediante Tapatalk
Click to expand...
Click to collapse
definitivo, esto sería la mejor opción, en el foro están los ROMS originales para regresarnos a una versión anterior a la modificación que aplicamos.
These are the upgrade screenshots that I'd promised
My system, is the last soak test 4, and... I don't know if i have to install the final version of MM
Is the chop chop feature active in the final version? Can anybody say something about that?
Thank's in advance
Sorry for the english, I'm latin
gierso said:
Si tenías root tienes que esperar a que salga el firmware completo
O regresar al firmware completo anterior y aplicar la actualiAcion ...
Enviado desde mi Nexus 6P mediante Tapatalk
Click to expand...
Click to collapse
Entonces si flasheo el bootloader, recovery y boot del firmware anterior no funciona?
Quetzalfp said:
Entonces si flasheo el bootloader, recovery y boot del firmware anterior no funciona?
Click to expand...
Click to collapse
Por ahí en mi dropbox tengo la versión final de marshmallow empaquetada en un zip, si tienes bootloader abierto, y supongo que te sabes mover con la consola de windows para fastboot, entonces no será problema flashear los archivos contenidos en el zip.
Tal zip lo subí apenas lo bajé hace no muchos días. Yo no lo he puesto porque como ya he mencionado, tengo la última soak test 4, y como ya la tengo a modo personalizada, esto es: root, viper4android, custom kernel, "karatazo" para la lámpara activado, gravity box, liteada, etc, etc ... Pues me da un poco de pereza hacer el proceso de meter los comandos e instalar todo...
Como fuere, les dejo el enlace de la rom oficial final MM 6.0.1
XT1225_QUARK_RETBR_6.0.1_MPG24.107-70.2_cid12_subsidy-DEFAULT_CFC.xml.zip
People, use english please.
It is not everyone that understands spanish.
veccini said:
Por ahí en mi dropbox tengo la versión final de marshmallow empaquetada en un zip, si tienes bootloader abierto, y supongo que te sabes mover con la consola de windows para fastboot, entonces no será problema flashear los archivos contenidos en el zip.
Tal zip lo subí apenas lo bajé hace no muchos días. Yo no lo he puesto porque como ya he mencionado, tengo la última soak test 4, y como ya la tengo a modo personalizada, esto es: root, viper4android, custom kernel, "karatazo" para la lámpara activado, gravity box, liteada, etc, etc ... Pues me da un poco de pereza hacer el proceso de meter los comandos e instalar todo...
Como fuere, les dejo el enlace de la rom oficial final MM 6.0.1
XT1225_QUARK_RETBR_6.0.1_MPG24.107-70.2_cid12_subsidy-DEFAULT_CFC.xml.zip
Click to expand...
Click to collapse
Thanks. I'll give it a try.
@mirdones. I was asking if I can apply the OTA after flash the stock bootloader and recovery from a previous firmware, as I already have root in my phone.
¿Sabe usted cómo instalar sobre CM13?
bigjailerman said:
¿Sabe usted cómo instalar sobre CM13?
Click to expand...
Click to collapse
¡Oh sí! Usted debe flashear con comandos vía consola CMD de windows y con la última rom stock, misma que mensajes atrás he dejado el enlace para descarga.
Graz!
Entendemos español los Mexicanos que tenemos un Moto Maxx
Enviado desde mi Moto MAXX mediante Tapatalk
fenix3nk0r3 said:
Entendemos español los Mexicanos que tenemos un Moto Maxx
Enviado desde mi Moto MAXX mediante Tapatalk
Click to expand...
Click to collapse
Despite being a thread for the update of Moto Maxx in Mexico, this is not a mexican forum, but an international one.
I believe you all understand and can write and read in english, so why create a gueto only for you?
Besides, I also believe it is in the forum rules that everything should be written in english.
I'm currently on 5.0.2 and having problems to update to MM. My Moto maxx is rooted and have trwp recovery. I'm from Mexico and any help will be greatly appreciated.
dcotarobles said:
I'm currently on 5.0.2 and having problems to update to MM. My Moto maxx is rooted and have trwp recovery. I'm from Mexico and any help will be greatly appreciated.
Click to expand...
Click to collapse
Do as i did, download the the previous OTA (posted in some message above) to return your phone to stock and you good to go to receive the OTA.
mirdones said:
Despite being a thread for the update of Moto Maxx in Mexico, this is not a mexican forum, but an international one.
I believe you all understand and can write and read in english, so why create a gueto only for you?
Besides, I also believe it is in the forum rules that everything should be written in english.
Click to expand...
Click to collapse
If we create a gueto as a mexicans...
You as a brazilian man must to create a Favela
So, we can create a Mexican Barrio, but never a "Gueto"
Quetzalfp said:
Do as i did, download the the previous OTA (posted in some message above) to return your phone to stock and you good to go to receive the OTA.
Click to expand...
Click to collapse
I have the same issue, root in my phone and I can´t update via OTA to Android 6. Which will be the best release for flash my phone and could make the OTA update?
My phone is mexican
Hola me podrian ayudar tengo el moto g4 xt1621, lo que sucedió fue que estaba lleno de eolo parche de seguridad de 7.0 no recuerdo si la era de diciembre de marzo pero cuando terminó el sistema de reboot ahora pero no prendio mas, solo prende el led Y la pc lo reconoce ya instale los drivers pero me da error quisiera saber si me podrian ayudar a fondo a recuperar mi moto g4, disculpen pero lo pongo en ingles y español pero no hablo ingles uso el traductor, ayudame porfavor
:crying: :crying:
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Hello I could help I have the bike g4 xt1621, what happened was that it was full of eolo security patch 7.0 I do not remember if the era of December of March but when the reboot system finished now but I did not turn on anymore, just turn on the led And the PC recognizes it and install the drivers but it gives me error I would like to know if I could help in depth to recover my bike g4, sorry but I put it in English and Spanish but I do not speak English I use the translator, help me please
:crying: :crying:
You should be a little bit more specific regarding to on what version did you were when this happened.
If the white led still works i think that you got a chance that your bootloader would be functional. Try to plug your device (powered off) to a charger while holding VOLUME - button.
Your goal is to enter to the bootloader mode and be able to flash the stock rom (full factory from march).
If this method doesn't work, you got high chances that your device might be soft-bricked, and you'll must wait till the new blank flash files be available.
This Motorola devices aren't the ideal ones for downgrade or update OTA's if you don't know what are you doing (it's clearly your case) because a bootloader and GPT downgrading could be very risky, and in some cases this ends in a bricked device (i'll hope not yours).
Same message in spanish:
Deberías ser más detallista en cuanto a en que versión estabas cuando te sucedió esto, si el led todavía prende puede que tengas todavía un bootloader funcional. Intentá conectando tu dispositivo (apagado) a un cargador presionando el botón VOLUMEN -.
Tu meta es poder entrar al modo bootloader para poder flashear la rom stock, en ese caso, tendrías que flashear la de Marzo. Si nada de esto sirve, posiblemente tu dispositivo este brickeado (como tantos otros en este foro). Estos dispositivos de Motorola no son los ideales para flashear roms sin saber lo que se hace, debido a que hacer un downgrade de la version del bootloader o del GPT termina en un brick.
Okay this is going to be troublesome with language barriers, please do the above steps and do inform us.
Download link is -
https://forum.xda-developers.com/moto-g4-plus/how-to/stock-rom-npjs25-93-14-4-march-1-t3608138
But do remember take the correct build option or check if your variant is present in the list or not
moonlightdrive said:
You should be a little bit more specific regarding to on what version did you were when this happened.
If the white led still works i think that you got a chance that your bootloader would be functional. Try to plug your device (powered off) to a charger while holding VOLUME - button.
Your goal is to enter to the bootloader mode and be able to flash the stock rom (full factory from march).
If this method doesn't work, you got high chances that your device might be soft-bricked, and you'll must wait till the new blank flash files be available.
This Motorola devices aren't the ideal ones for downgrade or update OTA's if you don't know what are you doing (it's clearly your case) because a bootloader and GPT downgrading could be very risky, and in some cases this ends in a bricked device (i'll hope not yours).
Same message in spanish:
Deberías ser más detallista en cuanto a en que versión estabas cuando te sucedió esto, si el led todavía prende puede que tengas todavía un bootloader funcional. Intentá conectando tu dispositivo (apagado) a un cargador presionando el botón VOLUMEN -.
Tu meta es poder entrar al modo bootloader para poder flashear la rom stock, en ese caso, tendrías que flashear la de Marzo. Si nada de esto sirve, posiblemente tu dispositivo este brickeado (como tantos otros en este foro). Estos dispositivos de Motorola no son los ideales para flashear roms sin saber lo que se hace, debido a que hacer un downgrade de la version del bootloader o del GPT termina en un brick.
Click to expand...
Click to collapse
It does not turn on, already try with volume - and power and not only turn on the LED
=========================================================
No no prende, ya intente con volumen - y power y no solo prende el LED
Por ahora no hay solucion amigo...
TioHenry said:
Hola me podrian ayudar tengo el moto g4 xt1621, lo que sucedió fue que estaba lleno de eolo parche de seguridad de 7.0 no recuerdo si la era de diciembre de marzo pero cuando terminó el sistema de reboot ahora pero no prendio mas, solo prende el led Y la pc lo reconoce ya instale los drivers pero me da error quisiera saber si me podrian ayudar a fondo a recuperar mi moto g4, disculpen pero lo pongo en ingles y español pero no hablo ingles uso el traductor, ayudame porfavor
:crying: :crying:
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Hello I could help I have the bike g4 xt1621, what happened was that it was full of eolo security patch 7.0 I do not remember if the era of December of March but when the reboot system finished now but I did not turn on anymore, just turn on the led And the PC recognizes it and install the drivers but it gives me error I would like to know if I could help in depth to recover my bike g4, sorry but I put it in English and Spanish but I do not speak English I use the translator, help me please
:crying: :crying:
Click to expand...
Click to collapse
el blank flash y algunos archivos no estan actualizados en base al moto g4
¿Eres de mexico?
Porcierto ya me suscribi a tu canal bro
Agregame: https://www.facebook.com/henry.andrade.528
QuinsZouls26 said:
el blank flash y algunos archivos no estan actualizados en base al moto g4
Click to expand...
Click to collapse
Pregunta!!!
QuinsZouls26 said:
el blank flash y algunos archivos no estan actualizados en base al moto g4
Click to expand...
Click to collapse
Se resolvio tu problema de Brick??? tengo el XT1621 y solo enciende el led y la PC no lo reconoce, ya he descargado los drivers de motorola y los de DB y los de Qualcom y nada .............. me puedes decir como lo resolviste ???
Se solucionó el brick
Utilizando la versión más moderna del blank flash se puede recuperar el inicio del bootloader, solo que debes flashear la última versión de Android que sacó Motorola
MirkoTL said:
Se resolvio tu problema de Brick??? tengo el XT1621 y solo enciende el led y la PC no lo reconoce, ya he descargado los drivers de motorola y los de DB y los de Qualcom y nada .............. me puedes decir como lo resolviste ???
Click to expand...
Click to collapse
QuinsZouls26 said:
Utilizando la versión más moderna del blank flash se puede recuperar el inicio del bootloader, solo que debes flashear la última versión de Android que sacó Motorola
Click to expand...
Click to collapse
4. Use the English language.
We understand that with all the different nationalities, not everyone speaks English well, but please try. If you're really unable to post in English, use an online translator. You're free to include your original message in your own language, below the English translation. (This rule covers your posts, profile entries and signature). You could try :- https://translate.google.com/ or https://www.babelfish.com/ or use one of your choice.
????????
QuinsZouls26 said:
Utilizando la versión más moderna del blank flash se puede recuperar el inicio del bootloader, solo que debes flashear la última versión de Android que sacó Motorola
Click to expand...
Click to collapse
Como puedo flashear la última versión de android que saco motorola si mi celular ni siquiera es detectado por el computador, solo parpadea el led. Ademas tienes algún enlace de la versión más moderna del blank flash ??
How can I flash the latest version of Android that I get Motorola if my cell phone is not even detected by the computer, only the LED flashes. Do you also have a link to the most modern version of blank flash?
Hi Friends, my LG G2 is in the screen LG logo and after this the message security error and power down.
Before this my phone its recognized by the pc (only fastboot mode) and with the Verry Partitions error, i recovered this with SRKTool so.. now this into the Security Error and my PC not recognize the device (i tried on 3 pcs and 9 diferent ports)
I need help please!!! I dont have money for another phone, and this is my life, please, any help is received. Iam from Venezuela, and sorry for th bad english.
MoixyS2 said:
Hi Friends, my LG G2 is in the screen LG logo and after this the message security error and power down.
Before this my phone its recognized by the pc (only fastboot mode) and with the Verry Partitions error, i recovered this with SRKTool so.. now this into the Security Error and my PC not recognize the device (i tried on 3 pcs and 9 diferent ports)
I need help please!!! I dont have money for another phone, and this is my life, please, any help is received. Iam from Venezuela, and sorry for th bad english.
Click to expand...
Click to collapse
Here's a guide: https://forum.xda-developers.com/lg-g2/help/noob-friendly-recovery-download-mode-t3112805
Jan Philipp said:
Here's a guide: https://forum.xda-developers.com/lg-g2/help/noob-friendly-recovery-download-mode-t3112805
Click to expand...
Click to collapse
this works only on linux... sure? My windows pcs not recognize my device...
.
MoixyS2 said:
this works only on linux... sure? My windows pcs not recognize my device...
.
Click to expand...
Click to collapse
Right. You need a running Linux. So you can download a Linux-Live-CD and run it from CD/DVD-drive without installation or you can set up a Linux with VirtualBox which is done in a couple of minutes.
Sadly I have no knowledge about windows solutions. Sorry.
hola ! según lo que me pasó hace muy poco, yo hice prácticamente lo mismo que vos (osea arreglarlo con un archivo bat, o no ?)... lo que funcionó en mí caso fue bajar un archivo TOT y el correspondiente dll y flashear vía Flash tools 1.6, es decir, no el "normal" que le pones el kdz y listo porque ese no me lo tomaba de ninguna forma... espero que te sirva ! tengo tutoriales pero creo que son todos enlaces externos a otros foros y no sé si se considerará spam o no... buena suerte
Hello ! According to what happened to me very recently, I did pretty much the same as you (I fix it with a bat file, or not?) ... what worked for me was to download a TOT file and the corresponding dll and flash via Flash Tools 1.6, that is, not the "normal" you put the kdz and ready because that did not take me in any way ... I hope it serves you! I have tutorials but I think they are all external links to other forums and I do not know if it will be considered spam or not ... good luck
superking123 said:
hola ! según lo que me pasó hace muy poco, yo hice prácticamente lo mismo que vos (osea arreglarlo con un archivo bat, o no ?)... lo que funcionó en mí caso fue bajar un archivo TOT y el correspondiente dll y flashear vía Flash tools 1.6, es decir, no el "normal" que le pones el kdz y listo porque ese no me lo tomaba de ninguna forma... espero que te sirva ! tengo tutoriales pero creo que son todos enlaces externos a otros foros y no sé si se considerará spam o no... buena suerte
Hello ! According to what happened to me very recently, I did pretty much the same as you (I fix it with a bat file, or not?) ... what worked for me was to download a TOT file and the corresponding dll and flash via Flash Tools 1.6, that is, not the "normal" you put the kdz and ready because that did not take me in any way ... I hope it serves you! I have tutorials but I think they are all external links to other forums and I do not know if it will be considered spam or not ... good luck
Click to expand...
Click to collapse
With Security Error??? And not recognized on my Windows PC
con el logo de Security Error?? Y no es reconocido en mi computadora con Windows
Jan Philipp said:
Right. You need a running Linux. So you can download a Linux-Live-CD and run it from CD/DVD-drive without installation or you can set up a Linux with VirtualBox which is done in a couple of minutes.
Sadly I have no knowledge about windows solutions. Sorry.
Click to expand...
Click to collapse
not working
the sdb partitions not visible on the linux terminal
MoixyS2 said:
With Security Error??? And not recognized on my Windows PC
con el logo de Security Error?? Y no es reconocido en mi computadora con Windows
Click to expand...
Click to collapse
Si, despues de arreglar el error de múltiples particiones pude volver a entrar al modo download (mantener volumen arriba y poner el usb, aunque creo que ya lo sabes)... Sino pareciera que la única forma que te queda es volver a forzar ese modo de corrupción haciendo puente, pero es un lio, e igualmente necesitarías lo de Linux creo :/
If, after fixing the error of multiple partitions I was able to re-enter the download mode (keep volume up and put the usb, although I think you already know) ... But it seems that the only way you have is to re-enforce that Corruption mode making bridge, but it's a mess, and you'd also need the Linux thing I think: /
superking123 said:
Si, despues de arreglar el error de múltiples particiones pude volver a entrar al modo download (mantener volumen arriba y poner el usb, aunque creo que ya lo sabes)... Sino pareciera que la única forma que te queda es volver a forzar ese modo de corrupción haciendo puente, pero es un lio, e igualmente necesitar
Click to expand...
Click to collapse
Hola, estuve intententando hacer relock a mi moto g5 plis XT1681 pero falle y el celular me hace bootloop.
Alguien sabe donde puedo conseguir los archivos bootloader.img, gpt.bin y recovery.img + Rom Stock con la actualización de agosto?
Gracias.
-
Hi, a was trying to relock my moto g5 plus XT1681 but i couldn't and now the phone is doing bootloop.
Someones knows where i a can find the files bootloader.img, gpt.bin and recovery.img + Stock Rom with the august update.
Thanks.
What's your retail channel?
Enviado desde mi Moto G (5) Plus mediante Tapatalk
AgustinGps said:
Hola, estuve intententando hacer relock a mi moto g5 plis XT1681 pero falle y el celular me hace bootloop.
Alguien sabe donde puedo conseguir los archivos bootloader.img, gpt.bin y recovery.img + Rom Stock con la actualización de agosto?
Gracias.
-
Hi, a was trying to relock my moto g5 plus XT1681 but i couldn't and now the phone is doing bootloop.
Someones knows where i a can find the files bootloader.img, gpt.bin and recovery.img + Stock Rom with the august update.
Thanks.
Click to expand...
Click to collapse
ChromeSk64 said:
Estoy en las mismas que tú, tengo exactamente el XT1681 y siempre me da el error de "failed oem invalid" algo así si no mal recuerdo. Y descargué la versión más reciente que se supone que es la de agosto.
I am in the same as you, I have exactly the model XT1681 and always gives me the error of "failed oem invalid" something like that if not bad memory. And I downloaded the most recent version that is supposed to be August.
Click to expand...
Click to collapse
Yo estuve en la misma y solucione esa situacion.
Con la última build con el parche de agosto no pude cerrar el bootloader.
Entonces con cuidado baje a una build anterior pero flasheando SIN los comandos gpt ni bootloader (para evitar futuro hardbrick por ota) y tampoco los de lock.
Finaliza el flash inician el sistema luego con todos los comandos y lock flash la última build.
Se cierra el bootloader y nuevamente tenés que flashear la última sin lock.
Suerte y tengan cuidado.
Mod edit: Google Translate translation to English
I was in it and solve that situation.
With the last build with the August patch I could not close the bootloader.
Then carefully go down to a previous build but flashing WITHOUT the commands gpt or bootloader (to avoid future hardbrick by ote) and neither those of lock.
Finalize the flash start the system then with all the commands and lock flash the last build.
The bootloader is closed and again you have to flash the last without lock.
Good luck and be careful.
In this page you have:
The August version is "NPNS25.137-33-11" (search for it on the page (Ctrl + F))
https://firmware.center/firmware/Motorola/Moto G5 Plus/Stock/
Members are reminded of the Forum Rules
In this case:
4. Use the English language.
We understand that with all the different nationalities, not everyone speaks English well, but please try. If you're really unable to post in English, use an online translator. You're free to include your original message in your own language, below the English translation. (This rule covers your posts, profile entries and signature).
Posts ignoring this Rule have been deleted.