Galaxy Tab 10.1(n) CWM/TWRP Rolling Screen, need Recovery Fix - Galaxy Tab 10.1 General

Hello
I've an old Samsung Galaxy Tab 10.1n (GT-P7511) and I tried to root it with a rooting guide.
After I installed CWM with ODIN, the CWM Homescreen was flickering. So I looked for an fix (I found one, but the website with the fix was down [ismaakit.com])
After that I tried to install TWRP, but the recovery had an rolling screen too.
Has anybody a new link or the file on his computer?
Thanks :good:

Same issue
TimHtml said:
Hello
I've an old Samsung Galaxy Tab 10.1n (GT-P7511) and I tried to root it with a rooting guide.
After I installed CWM with ODIN, the CWM Homescreen was flickering. So I looked for an fix (I found one, but the website with the fix was down [ismaakit.com])
After that I tried to install TWRP, but the recovery had an rolling screen too.
Has anybody a new link or the file on his computer?
Thanks :good:
Click to expand...
Click to collapse
Hi, my Galaxy Tab 10.1 is rooted and boot up in cyanogenmod but I can not enter TeamWinRecovery neither ClockWorkRecovery, the recovery screen is rolling down and I can not see anything, I did not find the solution but I want to join your enquiry and post, I've read some people had same issue, I hope we found the solution.

Yes! Just try to flash twrp 2.8 version and not the 3.0 or 3.1 (with odin)

Related

Cant install a Costum ROM

Greetings to everyone,
I would be happy if you can help me with a little problem on my Note 4.
For some reason I cant install a costum ROM on my Note 4 (N910F).
As soon as I have installed a ROM like NameLessROM the phone reboots, shows the Samsung logo for about 10 seconds, reboots, shows the logo, reboots, ...
Its the same thing happened to me once whileI tried to boot it with no system partition (wiped it)
I am using the newest TWRP.
Anyone got a solution?
Greetings
Robin
Sorry Robin for "hijacking" your thread but we're in the same boat
I'm having the exact same problem with my SM-N910F.
I've rooted the device using Odin3 and "CF-Auto-Root-trlte-trltexx-smn910f.tar.md5". This thread: http://forum.xda-developers.com/note-4/orig-development/sm-n910-cf-auto-root-t2897428
That went fine and I checked the root privillige afterwords with a terminal app on the phone. I issued the SU command and got at .....root#. Don't know if thats the right/best way to check it!
After rooting the phone I still had the stock recovery tool so again with Odin3 I installed "philz_touch_6.59.0-trlte.tar.md5".
This also went fine and I can now access "PhilZ Touch 6" recovery tool.
From here I've tried installing three different ROM's ("GlamourS6v3_1", "Super.Fast&LolliFamous™[S6+Style+v2][PART.4.0.]_BOC3" and "Super.Fast&LolliFamous_[.PART.6.0.]_BOD2") but keeps ending up with a phone that just keeps rebooting.
When I install the ROM I start with the "Clean to install a new ROM" option and after that install ZIP. The ROM's are located on my SD card.
The installation succed and when I reboot the phone just continues to reboot.
Any good advise?
Regards
John
You have to flash via odin the right modem and bootloader for the ROM that you're trying to install
mone, your a genius! Or maybe you just read the instructions more carefully than I did
I found the exact info and links in the ROM thread and everything is working now.
Thanks!
/John
RDieker201 said:
Greetings to everyone,
I would be happy if you can help me with a little problem on my Note 4.
For some reason I cant install a costum ROM on my Note 4 (N910F).
As soon as I have installed a ROM like NameLessROM the phone reboots, shows the Samsung logo for about 10 seconds, reboots, shows the logo, reboots, ...
Its the same thing happened to me once whileI tried to boot it with no system partition (wiped it)
I am using the newest TWRP.
Anyone got a solution?
Greetings
Robin
Click to expand...
Click to collapse
Okay for Nameless ROM to work on N910F you have to install the SimplKernel and need to update your bootloader and modem accordingly.
imladris said:
Sorry Robin for "hijacking" your thread but we're in the same boat
I'm having the exact same problem with my SM-N910F.
I've rooted the device using Odin3 and "CF-Auto-Root-trlte-trltexx-smn910f.tar.md5". This thread: http://forum.xda-developers.com/note-4/orig-development/sm-n910-cf-auto-root-t2897428
That went fine and I checked the root privillige afterwords with a terminal app on the phone. I issued the SU command and got at .....root#. Don't know if thats the right/best way to check it!
After rooting the phone I still had the stock recovery tool so again with Odin3 I installed "philz_touch_6.59.0-trlte.tar.md5".
This also went fine and I can now access "PhilZ Touch 6" recovery tool.
From here I've tried installing three different ROM's ("GlamourS6v3_1", "Super.Fast&LolliFamous™[S6+Style+v2][PART.4.0.]_BOC3" and "Super.Fast&LolliFamous_[.PART.6.0.]_BOD2") but keeps ending up with a phone that just keeps rebooting.
When I install the ROM I start with the "Clean to install a new ROM" option and after that install ZIP. The ROM's are located on my SD card.
The installation succed and when I reboot the phone just continues to reboot.
Any good advise?
Regards
John
Click to expand...
Click to collapse
If I''m not mistaken your phone model is N910F, if so you are flashing the incorrect ROMs as the ones you listed are for the exynos variant. So please look for ROMs in the correct thread "Galaxy Note 4 Android Development (Snapdragon)" And using PHilztouch recovery is not recommend and so I would advise you to install TWRP,
N910F = Trltexx
N910G = trltedt
Exynos:
N910C = treltexx

SM-J500F/DS cannot boot

Hi to all,
had root this device on 6.0.1 with TWRP. Now I needed a full reset due to a Bluetooth problem to check if its root/software related. BUT on my mistake I erased EVERYTHING through TWRP (Dalvik/ART Cahe,System,Data,Internal Storage,Cache, Micro SD, Android Secure, USB-OTG)
Tried to install custom rom Aospextended but I don't know the how to and I am lost in forums.. the phone doesn't boot... after zip file installation the screen fades to somewhat yellowish like LCD problem... I can still access TWRP..
p.s. I am an iPhone guy and just tried to fix this for my son... hope for your understanding for probably asking something very common..!
ANY HELP WOULD BE greatly appreciated even to get back to stock rom
Many thanks in advance!
gsp1 said:
Hi to all,
had root this device on 6.0.1 with TWRP. Now I needed a full reset due to a Bluetooth problem to check if its root/software related. BUT on my mistake I erased EVERYTHING through TWRP (Dalvik/ART Cahe,System,Data,Internal Storage,Cache, Micro SD, Android Secure, USB-OTG)
Tried to install custom rom Aospextended but I don't know the how to and I am lost in forums.. the phone doesn't boot... after zip file installation the screen fades to somewhat yellowish like LCD problem... I can still access TWRP..
p.s. I am an iPhone guy and just tried to fix this for my son... hope for your understanding for probably asking something very common..!
ANY HELP WOULD BE greatly appreciated even to get back to stock rom
Many thanks in advance!
Click to expand...
Click to collapse
Install a ROM with marshmellow firmware please don't post in this thread of j5 forum
hi, already posted by mistake at firmware section admins can delete that please...
having TOTALLY erased my SM-J500F/DS with TWRP I cannot put back anything...
ANY help on stock recovery, custom rom or anything would be greatly appreciated... I tried already one custom rom but I am not sure... just install the zip file? This procedure doesn't boot, restarts gets the logo and after this the screed gets yellowish like damaged!!!... again I have TWRP access thankfully...
please any help?
gsp1 said:
hi, already posted by mistake at firmware section admins can delete that please...
having TOTALLY erased my SM-J500F/DS with TWRP I cannot put back anything...
ANY help on stock recovery, custom rom or anything would be greatly appreciated... I tried already one custom rom but I am not sure... just install the zip file? This procedure doesn't boot, restarts gets the logo and after this the screed gets yellowish like damaged!!!... again I have TWRP access thankfully...
please any help?
Click to expand...
Click to collapse
You must go to section Samsung j5 2015 you will find all you need, since restoring to stock, rooting, installing the correct TWRP for your device....and more.
You NEED to READ because too much information for one post, but this is the correct place for you.
Pay attention the correct files TWRP for 601 because there are TWRP for lollipop devices, and when choosing ROMs you MUST downgrade your firmware to Lollipop, that's the reason for artifacts and greenish screen because of incompatibility of TWRP and there are ROMs that you can install with twrp601, others need booltloader and twrp lollipop. Hope you are nota blind anymore
Taivotat2 said:
You must go to section Samsung j5 2015 you will find all you need, since restoring to stock, rooting, installing the correct TWRP for your device....and more.
You NEED to READ because too much information for one post, but this is the correct place for you.
Click to expand...
Click to collapse
Many thanks! I will do it!
gsp1 said:
Hi to all,
had root this device on 6.0.1 with TWRP. Now I needed a full reset due to a Bluetooth problem to check if its root/software related. BUT on my mistake I erased EVERYTHING through TWRP (Dalvik/ART Cahe,System,Data,Internal Storage,Cache, Micro SD, Android Secure, USB-OTG)
Tried to install custom rom Aospextended but I don't know the how to and I am lost in forums.. the phone doesn't boot... after zip file installation the screen fades to somewhat yellowish like LCD problem... I can still access TWRP..
p.s. I am an iPhone guy and just tried to fix this for my son... hope for your understanding for probably asking something very common..!
ANY HELP WOULD BE greatly appreciated even to get back to stock rom
Many thanks in advance!
Click to expand...
Click to collapse
I had the same problem when flashing Lineage 14.1 on my phone (J500M), screen fadding with a green-yellowish color and no boot. That happened because I was trying to flash the custon Rom with the wrong base. I was using 6.0 before flashing and Lineage requires you start from 5.1.
All I need to do was search for my device on sammobile.com , get the right stock firmware and use Odin to flash the rom on my device. From there I was able to flash TWRP again and install Lineage correctly.
gsp1 said:
Hi to all,
had root this device on 6.0.1 with TWRP. Now I needed a full reset due to a Bluetooth problem to check if its root/software related. BUT on my mistake I erased EVERYTHING through TWRP (Dalvik/ART Cahe,System,Data,Internal Storage,Cache, Micro SD, Android Secure, USB-OTG)
Tried to install custom rom Aospextended but I don't know the how to and I am lost in forums.. the phone doesn't boot... after zip file installation the screen fades to somewhat yellowish like LCD problem... I can still access TWRP..
p.s. I am an iPhone guy and just tried to fix this for my son... hope for your understanding for probably asking something very common..!
ANY HELP WOULD BE greatly appreciated even to get back to stock rom
Many thanks in advance!
Click to expand...
Click to collapse
You have two solutions, you can restore your phone STOCK ROM with Samsung Smart Switch or downgrade to Lollypop firmware and install any custom rom trough TWRP.
Restore to STOCK:
Use Samsung Smart Switch, see howto here
Downgrade to Lollipop:
Install only Bootloader/Modem [6.0.1/5.1.1]BOOTLOADER AND MODEM FOR J500xx [Downgrade more easy] (Collection)
Downgrade to Lollypop (full ROM) (Tutorial) Upgrade J5 (2015) to 6.0 and Downgrade to 5.1.1 + Rooting
Also take a look at [GALAXY J5] Basic informations | Guides | Tips and Tricks | ROMS & KERNELS
DDkin said:
I had the same problem when flashing Lineage 14.1 on my phone (J500M), screen fadding with a green-yellowish color and no boot. That happened because I was trying to flash the custon Rom with the wrong base. I was using 6.0 before flashing and Lineage requires you start from 5.1.
All I need to do was search for my device on sammobile.com , get the right stock firmware and use Odin to flash the rom on my device. From there I was able to flash TWRP again and install Lineage correctly.
Click to expand...
Click to collapse
American_Jesus said:
You have two solutions, you can restore your phone STOCK ROM with Samsung Smart Switch or downgrade to Lollypop firmware and install any custom rom trough TWRP.
Restore to STOCK:
Use Samsung Smart Switch, see howto here
Downgrade to Lollipop:
Install only Bootloader/Modem [6.0.1/5.1.1]BOOTLOADER AND MODEM FOR J500xx [Downgrade more easy] (Collection)
Downgrade to Lollypop (full ROM) (Tutorial) Upgrade J5 (2015) to 6.0 and Downgrade to 5.1.1 + Rooting
Also take a look at [GALAXY J5] Basic informations | Guides | Tips and Tricks | ROMS & KERNELS
Click to expand...
Click to collapse
MANY THANKS to both of you guys!
Bro just install the official rom ,u can download it from the official site and flash with odin ..

Restoring Galaxy Note 10.1 GT-N8013 and Adding TWRP with Root

This is my post basically backing up files for the Galaxy Note 10.1 GT-N8013 "p4noterf" so we don't lose them later.
Restore factory fimeware
If you have crashed out your Galaxy Note 10.1 GT-N8013 and need to restore it try the following
1. First make sure you can enter download mode: Power + Vol. Down and then Vol. Up to continue (Google if unclear)
2. Download the latest factory firmware (N8013UEUCOI1_N8013XARCOI1_XAR) here:
https://mega.nz/#F!UdFwWLyL!006TWe3MPyK-9yeAJlH7AQ
3. We need it unzipped so unzip it.
4. Download Odin such as Odin 3.13.1 here: https://mega.nz/#!wZ9H1ArK!TLiWdY9YUKNzVpnVXuqzJz4rtA86XysGlmFfdWl5LvE
5. Unzip Odin and click it to start it up. It's the file named Odin3 v3.13.1 (or Odin3 v3.13.1.exe)
6. With your tablet in download mode plug it into your computer, it should show up in Odin
(If it won't connect to PC try another USB port or install the drivers: https://mega.nz/#!lFMVDbSC!j_sMAjcXneHSPkqgOysc382dqVzNB82QP5T_Huet8YA )
7. Load the unzipped firmware into the AP slot and press start
Install CWM Recovery and Root:
Follow the second root method here:
https://forum.xda-developers.com/showthread.php?t=1831152
---> which leads to here: http://rootgalaxynote.com/galaxy-no...t-galaxy-note-10-1-easiest-methodcwmmethod-2/
Backup of files from this method: https://mega.nz/#F!5c8lHSLR!540QzdGl4z1kknFNYlmNDg
Install TWRP
1. Through Google Play store Install TWRP app and either select your device, download files and flash firmware in the app or continue at step 2 after installing.
2. You can direct download latest versoin to your sdcard (Download folder will do): https://dl.twrp.me/n801x/
Backup of latest at the time of this writing was ===> https://mega.nz/#F!EYlXCQhB!fTx37McGKNCWXkumldtHLA
3. Inside the TWRP app select the file you downloaded
4. Flash firmware
You can now use TWRP to install a custom rom if you wish, I used CM 13.1
https://forum.xda-developers.com/galaxy-note-10-1/development/rom-lollipop-t3269375
Note:
I had to use this gapps to get my keyboard to work during setup!!!
https://mega.nz/#!Id1VXK7T!3VfvcdmyDzofaAmEBlhpgArxBmtJVW43wq55bEMEPgw
1. On the WiFi screen in the bottom corner there's a little keyboard symbol, touch it to open option.
2. Move slider to On position
Thanks, was looking for just this thing
Yas
Thank you for this! Made sure to save those files while I still can. Was able to restore, root and install Lineage OS 14.1 on this old Note 10.1 I inherited. Truly amazing to jump from Jellybean straight to Nougat when Samsung couldn't have cared less to update this tablet.
Cm 14.1 sidesync 4.7 on samsung gt-n8013 not working
Does anyone have any luck getting the Sidesync to work with Wifi Direct from the Samsung Note 10.1 Gt-N8013 Android 7.1 to the Android 8.1 Samsung S8 Phone. Trying to Get the Mirror Feature to Remote Control the Phone on the Tablet Screen
Can install sidesync and click to run .. app screen opens but than crashes with error message about not being able to mirror. Seems something not communicating with Wifi or hardware on tablet incompadability..??
Firmware V1.0
Your post has nothing to do with this topic .
see your identical post moved to Q&A
When I download the firmware using Odin, where does it get saved? I can't find the file with TWRP when I am ready to flash the firmware.
Odin does not download firmware.
You download firmware .
Odin is an installer for stock firmware tar files .
TWRP installs custom rom zips .
BrettApple said:
Thank you for this! Made sure to save those files while I still can. Was able to restore, root and install Lineage OS 14.1 on this old Note 10.1 I inherited. Truly amazing to jump from Jellybean straight to Nougat when Samsung couldn't have cared less to update this tablet.
Click to expand...
Click to collapse
Not sure if you'll see this but how did this go? I have the n8013 (2013) model and would really like to update it past Jelly Bean. My biggest concern is the S Pen and S Notes still working as well as they do now. Is yours still up and running? Thanks!
SPen etc dont really work on non Samsung firmware .
Suggest a search for alternative spen on play store etc .
Install CWM Recovery and Root:
Follow the second root method here:
https://forum.xda-developers.com/showthread.php?t=1831152
---> which leads to here: http://rootgalaxynote.com/galaxy-no...t-galaxy-note-10-1-easiest-methodcwmmethod-2/
Backup of files from this method: https://mega.nz/#F!5c8lHSLR!540QzdGl4z1kknFNYlmNDg
Click to expand...
Click to collapse
I'm trying to fix a bricked Note 10.1 (stuck on a bootloop and can't even access Recovery Mode, TeamWin logo appears and then tablet resets) but everything you linked there is already gone.
marianito10 said:
I'm trying to fix a bricked Note 10.1 (stuck on a bootloop and can't even access Recovery Mode, TeamWin logo appears and then tablet resets) but everything you linked there is already gone.
Click to expand...
Click to collapse
I managed to solve same problem by flashing TWRP recovery using heimdall
How to flash recovery using Linux and Heimdall? (SOLVED)
Hi. Decided to try to give some new life to this old thing. But when I install the TWRP thing and shut it down it immediately boots up and overwrites the TWRT. I know the instructions says to let go of the buttons "very fast", but I've been...
forum.xda-developers.com
michael.pihlblad said:
I managed to solve same problem by flashing TWRP recovery using heimdall
How to flash recovery using Linux and Heimdall? (SOLVED)
Hi. Decided to try to give some new life to this old thing. But when I install the TWRP thing and shut it down it immediately boots up and overwrites the TWRT. I know the instructions says to let go of the buttons "very fast", but I've been...
forum.xda-developers.com
Click to expand...
Click to collapse
Ok, I extracted the PIT file from my tablet with Heimdall (like it was suggested in the readme), then I flashed TWRP Recovery and same result... Bootloop, and when trying to access Recovery Mode the TeamWin logo shows up for a second and the tablet reboots. Also tried flashing a stock rom, PhilZ Touch recovery, and still both Odin and Heimdall always say it was "succesful" but the result is always the same, nothing changes.
It's just weird to me how the TeamWin logo still shows up even after I flash the stock rom. I read somewhere that the oldest stock rom for my device might work, but I can't find a link anywhere for it except here, where it's Premium Only...

Samsung A3 (2015) SM-A300FU Tried to root with Odin, failed -> Phone will not boot

I had connectivity issues with the Samsung A3 (2015) SM-A300FU I bought from a friend so I decided to flash a Custom ROM to see if the problem persists.
I flashed my Sony Xperia U Kumquat some years ago so I am not completely new to the topic.
I decided which ROM to use (LineAgeOS14.1) and went ahead and try to root my phone.
I found this page: https://androidmtk.com/root-samsung-galaxy-a3-sm-a300fu
via google and followed the instructions. After I followed them my Phone did not boot (stuck at the Samsung Galaxy A3 screen).
I read afterwards in the warnings that I should have only used these instructions with Android 4.4.
I tried flashing my device with a CF-Auto-Root from https://desktop.firmware.mobi/ which did not work.
Then I downloaded the recovery.img and boot.img from the firmware.mobi site converted them to odin flashable files with the script from this forum, which did not help the problem.
So I went to write this post but saw in the "Similar Threads" part a link to this post: "Is there a CF Root for Samsung A3 SM-A300FU ?"
Reading that thread brought me to this one: [RECOVERY][ROOT][TWRP 3.0.2-1]Samsung Galaxy A3(2015) SM-A300F/FU/G/H/M
I was able to boot into Team Win Recovery Project but I am unsure where to go from here.
Any help would be much appreciated.
Thanks in advance!
Quick Update before I got to leave for a few hours: I managed to follow the rest of the instructions in: [RECOVERY][ROOT][TWRP 3.0.2-1]Samsung Galaxy A3(2015) SM-A300F/FU/G/H/M
And after a long wait my phone booted. It even has the SuperSU App installed, but when I try to start it, a message pops up telling me
There is no SU binary installed and SuperSU cannot install it. This is a problem!
If you just upgraded to Android 5.0, you need to manually re-root - consult the relevant forums to your device!
Click to expand...
Click to collapse
I am unsure as to what exactly I should be doing here. I am on Android Version 6.0.1 IF you need any further information to help I will gladly provide it.
I found a SuperSU zip that worked: BETA-SuperSU-v2.74-2-20160519174328
After installing that I had root access and could install LineageOS and Gapps which solved my W-Lan Problem.
@Moderators you can close this

TWRP for SM-T505 (Galaxy Tab A7)

I want TWRP on my Galaxy Tab A7 2020
My model number is SM-T505
I my tablet for adb/fastboot. It is unlocked and in a few days I'll be unbricking it.
I need to use it odin way also, how will this work?
Can any of you build it for me please as it isn't supported for Tab A7.
Thanks!
DylanTechVoid said:
I want TWRP on my Galaxy Tab A7 2020
My model number is SM-T505
I my tablet for adb/fastboot. It is unlocked and in a few days I'll be unbricking it.
I need to use it odin way also, how will this work?
Can any of you build it for me please as it isn't supported for Tab A7.
Thanks!
Click to expand...
Click to collapse
Best to check this thread:
[Guide][SM-T500/T505] Galaxy Tab A7 10.4 - Unlock Bootloader & Root with Magisk
I recently purchased the Galaxy Tab A7 10.4 (released in 2020) and couldn't help but notice that there's no dedicated thread in the forums for unlocking the bootloader or rooting (Although, the method should be very similar to what is followed...
forum.xda-developers.com
I am also looking for a twrp file for my t505N tablet
Twrp for sm-T505N help
I want twrp for sm-T505N pleaseeeee
The current t505 twrp causes device to fail to boot after I boot to twrp,format data and then boot device it boot normally
But on reboot ,,software is bricked
First time to face such issue
Please twrp for t505N. Plllllease
Here are screenshots
Anyone found any way to fix ??
Have you found the way to fix it? I think i know how to fix it just download the pip file for your device and inject it with odin, theres a tab for that but i think you may need to search how to inject the pip file but then inject the software that you want and your done it may not work idk
elswerky said:
Anyone found any way to fix ??
Click to expand...
Click to collapse
you need to flash this under userdata in odin
EdwardTCM said:
you need to flash this under userdata in odin
Click to expand...
Click to collapse
like this
Anyone found any way to fix ??
i have same problem , fail to flash “super “and now it brick
Can you send pictures?

Categories

Resources