Has anyone ever noticed a gap between there fingerprint sensor on the back of there Nexus 6p next to the round bezel... just a random question... ?
Sent from my Nexus 6P using XDA-Developers mobile app
No
mrufokid said:
Has anyone ever noticed a gap between there fingerprint sensor on the back of there Nexus 6p next to the round bezel... just a random question... ?
Sent from my Nexus 6P using XDA-Developers mobile app
Click to expand...
Click to collapse
The actual fingerprint sensor itself is a rounded square that sits beneath the casing
https://d3nevzfk7ii3be.cloudfront.net/igi/ZlpUoq3OjhHJsqTo
It's possible yours could have dirt or debris under the edge, or that your casing is slightly bent.
Check for bending closely
There shouldn't be much space for the sensor to drift away from the body.
Related
Hi,
I have the screen lift issue and when opening my Nexus up I see I have two screws missing. Searching around I've read they are 3.2 mm Phillips screws with M1.4 thread. I know nothing about screws and have tried searching google with no luck. Does anyone know where I can buy these so I can try and replace my missing ones? The guy at HMV said their stock is all the same shipment so if I get a replacement it's most likely to have the same issue.
Any hardware shop. B&Q for example.
*Sent from Nexus S*
Asus apparently decided your screen attachment is better without those two screws, and you are going to replace them. Why?
Sent from my Nexus 7 using xda app-developers app
Put them in and watch that screen rise even more
Sent from my Nexus 7 using Tapatalk 2
really? So the only fix is the glue? I thought as some seem to be fixing their screen lift by tightening the screws it would work. Back to the drawing board I guess.
Sent from my Nexus 7 using xda app-developers app
Give it a shot if you want, sod putting glue anyway near my screen, if its that bad take it back
Sent from my Nexus 7 using Tapatalk 2
The screen lift isn't too bad more worried about it getting worse in the future. I'm thinking about returning it but my Nexus is perfect bar this lift and with all the issues being reported I'm worried I'll get one with even more issues.
Sent from my Nexus 7 using xda app-developers app
I have a little and a mean a little hardly even noticeable screen lift on the left hand side if u hold in portrait and type with ya thumbs its wear my hand would go, I'm not returning again I'm on my 3rd
Sent from my Nexus 7 using Tapatalk 2
I have the Sprint version of the S5 and notice there is smudging underneath the glass by the earpiece on both sides. Also, there is a smudge on the right side near the bottom. Anyone else have this problem? Thinking of taking it back to Best Buy for an exchange. The smudges seem to go away using a microfiber cloth but then come back. Any ideas?
Sent from my SM-G900P using Tapatalk
You figure it out? No smudges here...
Sent from my SM-G900P using Tapatalk
Got a replacement today and none of those smudges on the glass.
Sent from my SM-G900P using Tapatalk
It was probably the oleophobic coating wearing off prematurely
-Sent from Tapatalk
Is anyone's device plastic breaking off? I'm talking about the strip between the glass and aluminum housing.
Sent from my Nexus 6P using Tapatalk
No
kench33 said:
Is anyone's device plastic breaking off? I'm talking about the strip between the glass and aluminum housing.
Sent from my Nexus 6P using Tapatalk
Click to expand...
Click to collapse
No definitely not
dladz said:
No definitely not
Click to expand...
Click to collapse
I will get a picture once I get off work but I'm not sure how it happened. It's always in a case, but I take it off maybe once a day, which may have caused it but I'm really careful about that.
Sent from my Nexus 6P using Tapatalk
Does it look like this? If so go to the "Bent after 2 days" thread. I know it's not bent, so the title is misleading. But the "Bent" issue in that thread is only this issue.
Like this?
This only happened because it fell naked, it was 3ft drop though so I'm impressed.
Only got a little dent with it too.
Sent from my Nexus 6P using Tapatalk
This is how mine looks in the top left of the picture. Never been dropped out of the case.
I can't really see anything on the photo, it all blends in.
If you mean the thin plastic band that sits between the screen and the aluminium case then yes, that seems to have the characteristics of play dough, it is easily dented.
Sent from my Nexus 6P using Tapatalk
mkouk said:
I can't really see anything on the photo, it all blends in.
If you mean the thin plastic band that sits between the screen and the aluminium case then yes, that seems to have the characteristics of play dough, it is easily dented.
Sent from my Nexus 6P using Tapatalk
Click to expand...
Click to collapse
Agreed. That material is just a cushion.
Yes, I've had this as well. I took my 6P out of the case it's been in (pretty much since I got it) and the top right corner has lost some of the plastic. Never been dropped so not sure why it's happening.
Sent from my Nexus 6P using Tapatalk
Do you guys notice a minor gap on the left side of the screen? I am not sure if it affect the water proofing...
Sent from my SAMSUNG-SM-G935A using XDA-Developers mobile app
Peoples input please
Sent from my SAMSUNG-SM-N930A using XDA-Developers mobile app
I've heard all the tempered screen protectors currently available for curved screens are crap. I'd rather have that when a good one comes out.
Sent from my SAMSUNG-SM-N930A using Tapatalk
This looks good and comes with a screen protector OtterBox DEFENDER SERIES Case for Samsung Galaxy Note7 - Frustration Free Packaging - BLACK https://www.amazon.com/dp/B01IFLWSBO/ref=cm_sw_r_cp_apa_EHKVxb5H5MKPV
Sent from my SAMSUNG-SM-N930A using XDA-Developers mobile app
xraytedjim said:
I've heard all the tempered screen protectors currently available for curved screens are crap. I'd rather have that when a good one comes out.
Sent from my SAMSUNG-SM-N930A using Tapatalk
Click to expand...
Click to collapse
From what I've read most curved glass screens require additional duct tape to hold it in place...and because they don't have any glue in the middle, it doesn't really contact the screen itself, ruining touch sensitivity.
I had a tempered glass on my s6+ it glued just fine but is it worth using
Sent from my SAMSUNG-SM-N930A using XDA-Developers mobile app
Have you guys experience touch sensitivity issues with wet screen protectors?
Sent from my Galaxy Note7 using XDA Labs
I do but I don't have a protector on
Sent from my SAMSUNG-SM-N930A using XDA-Developers mobile app
dvtmg704 said:
I do but I don't have a protector on
Click to expand...
Click to collapse
Same, I find myself tapping the screen twice
dvtmg704 said:
I do but I don't have a protector on
Click to expand...
Click to collapse
Do you his believe it's a software issue.
Sent from my Galaxy Note7 using XDA Labs
borijess said:
Do you his believe it's a software issue.
Sent from my Galaxy Note7 using XDA Labs
Click to expand...
Click to collapse
No I think it's just the water not playing good with the screen nothing to worry about
Sent from my SAMSUNG-SM-N930A using XDA-Developers mobile app
dvtmg704 said:
No I think it's just the water not playing good with the screen nothing to worry about
Click to expand...
Click to collapse
What do you mean? You are not using a screen out protector.
Sent from my Galaxy Note7 using XDA Labs
I haven't gotten a screen protector yet
Sent from my SAMSUNG-SM-N930A using XDA-Developers mobile app
If ur finger is wet on any phone it won't respond good
Sent from my SAMSUNG-SM-N930A using XDA-Developers mobile app
dvtmg704 said:
If ur finger is wet on any phone it won't respond good
Click to expand...
Click to collapse
I think we have a misunderstanding between two Puerto Ricans. I meant the screen protectors that are applied using the wet method. I did not say my fingers are wet.
Sent from my Galaxy Note7 using XDA Labs
borijess said:
I think we have a misunderstanding between two Puerto Ricans. I meant the screen protectors that are applied using the wet method. I did not say my fingers are wet.
Sent from my Galaxy Note7 using XDA Labs
Click to expand...
Click to collapse
My bad Papa I have used them before I just don't like the rubber feel of them
Sent from my SAMSUNG-SM-N930A using XDA-Developers mobile app
I put a Skinomi screen protector on mine yesterday. It goes on wet. Before this I've only used tempered glass but there isn't any good option for the Note 7 yet. I'm surprised to say that I'm happy with the Skinomi. It hasn't effected touch sensitivity or the pen, and feels good.
Sent from my SAMSUNG-SM-N930A using Tapatalk
e36eury said:
I put a Skinomi screen protector on mine yesterday. It goes on wet. Before this I've only used tempered glass but there isn't any good option for the Note 7 yet. I'm surprised to say that I'm happy with the Skinomi. It hasn't effected touch sensitivity or the pen, and feels good.
Click to expand...
Click to collapse
Are you using a case with it?
I've got a clear Ringke case that was 99 cents as a preorder. It just barely touches the corners of the screen protector. Doesn't seem to be pushing it up after a few days.
Had the Skinomi on for one day. Applied perfectly with no bubbles or lint or anything in a steam filled bathroom and then let sit for a day. Shortly after putting the case on, started bunching up on 2 corners and this was the case friendly film I might add. Next day I broke down and went to ATT store and put the curved plastic protector they had there. Better than nothing and plays well with my case.
Problem with that is not every case is the same. Sounds like your case goes farther up on the screen than mine. Which case had issues with the Skinomi?