Database Users

[TWRP]Unlock huawei Honor 2 U9508/ Ascend g615

Hi everyone
This is how to unlock and install TWRP (root too) the Huawei Honor 2
The root in this process is a partial root....since Xposed and some other root features wont work because the stock Jb roms are odexed.
Warning...this process was not tested on B8xx aka emui 2.0 firmwares
It will succesfully work on :
B1xx
B5xx
B7xx
Also....you cannot flash official firmwares with unlocked bootloader...so you need to relock it in oreder to reflash a rom with dload mod
Check "HOW TO LOCK/RELOCK BOOTLOADER" bellow
So first :
IM NOT RESPONSIBLE IF YOU BREAK YOUR PHONE
COMPLETLY DESTROYED YOUR SD CARD
OR SIM CARDS NOT WORKING
....Do this at your own risk
Links Bellow.
1/Unlock Bootloader
First you need the flash tool : Here (not my tool...only sharing)
You will also need the usb drivers. You can install Hisuit and it will automatilcally install the drivers you need.
When everything is ready...enable Usb debugging on your phone
Connect the device to your pc via usb and run the tool.
---Select option 1 (so insert 1 and press enter) to install the new fastboot partition, which is able to unlock your device if you install an unsigned kernel / recovery.
---Select option 2 if you haven’t enabled usb debugging, or if you have previously flashed an unsigned partition and now your device isn’t booting.
---Select option 3 to flash a custom kernel you have previously renamed to boot.img and put on your desktop. Do NOT use dd dumps : which means do NOT use boot.img you can find in flashable rom zips.
---Select option 4 to flash a custom recovery you have previously renamed to recovery.img and put on your desktop. Do NOT use dd dumps neither here.
---Select option 5 to check if bootloader is locked, unlocked or relocked.
Congratulation...your phone is unlocked !
2/INSTALL TWRP AND ROOT
TWRP Recovery : Gdrive
Alternative TWRP Recovery : Gdrive ( Use Ctrl + S) to download and keep them in the same folder
Now after unlocking the bootloader close the unlocktool and reboot the phone in fastboot mode
After that :
1/ IF you used the first link recovery Rename the file to recovery.img ...put it on the same folder and use the unlocking tool to flash it
2/ IF you used the 2nd link (Alternative recovery) you can just run flash.bat and it will do the work
after installing recovery :
go to wipe menu...then advanced and wipe only dalvik cache
now reboot
if your phone is rooted choose do NOT root and reboot
if yours is not rooted :
hit reboot button and the phone will install the root....now all you need to do is to update supersu from the playstore
DONE
--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
HOW TO “RELOCK” BOOTLOADER
After your bootloader status is “unlocked”, if you want to flash a stock rom with dload method , you need to flash chinese recovery (not another one), then flash any of batty86 roms (or any other rom with both boot.img and reserved.img), let the device boot at least once, and the bootloader will be “relocked”; then you can install the original recovery and use the dload method again.
usefull links :https://huaweiascendg615.wordpress.com/
How to use chineese recovery for non chineese :Here
NOTE : I NO LONGER USE THE U9508 !
I've Bought a Samsung A5 A500FU
Credits :
TWRP team
Batty86 for his amazing tool and roms that can relock the bootloader
sorex blog for showing us how to use chineese recovery.
Hit :good: if i helped you

hello and thanks, do you have the file for bootloader unlock?? link is down

mimminou said:
Hello all xda devs and rookies
Today im showing you how to root and install TWRP 2.0.6.0 (Bootloader unlock too) on Huawei Honor 2
The root in this process is a partial root....since Xposed and some other root features wont work because the stock Jb roms are odexed...
-(Warning...this process was not tested on B8xx aka emui 2.0 firmwares
It will succesfully work on : B1xx
B5xx
B7xx
Also....you cannot flash official firmwares with unlocked bootloader...so you need to relock it in oreder to reflash a rom with dload mod
Check "HOW TO LOCK/RELOCK BOOTLOADER" bellow
So first :
IM NOT RESPONSIBLE IF YOU BREAK YOUR PHONE
COMPLETLY DESTROYED YOUR SD CARD
OR SIM CARDS NOT WORKING
....Do this at your own risk.
1/Unlock Bootloader
First you need the flash tool....Link Here (Link in first post) (not my tool...only sharing)
You will also need the usb drivers. You can install Hisuit and it will automatilcally install the drivers you need.
When every thing is ready...enable Usb debugging on your phone
Power off your phone; unplug the battery and replug it and boot up your phone in fastboot mode (power button + volum down)
Plug your phone in your computer and run flash.exe
choose 1 for chineese
choose 2 for english
Now choose unlock phone
after that choose fasboot option
Wait ~7 seconds and the phone will reboot
Congratulation...your phone is unlocked
2/INSTALL TWRP AND ROOT
Now after unlocking the bootloader you need to close flash.exe and reboot again your phone in fastboot mode
After that...open flash.exe and choose install TWRP V3 RECOVERY
NOTE : Do NOT choose Twrp touch version because its a little buggy and unstable (experimental users only)
now after the phone reboots...close the tool and reboot the phone in recovery mode using power + Volum up
go to wipe menu...then advanced and wipe only dalvik cache
now reboot to system....the recovery will notice that the phone is not rooted...
hit reboot button and the phone will install the root....now all you need to do is to update supersu from the playstore
DONE
Credits :
GenoKolar for his amazing tool and recovery and unlock script
TWRP team
EternityProject team for sharing this tool
Batty86 for his rom that can relock the bootloader
sorex blog for showing us how to use chineese recovery.
--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
HOW TO “RELOCK” BOOTLOADER
After your bootloader status is “unlocked”, if you want to flash a stock rom with dload method , you need to flash chinese recovery (not another one), then flash any of batty86 roms (or any other rom with both boot.img and reserved.img), let the device boot at least once, and the bootloader will be “relocked”; then you can install the original recovery and use the dload method again.
usefull links :here
How to use chineese recovery for non chineese :Here
#sorry for bad english....im using my phone
Hit :good: if i helped you
Click to expand...
Click to collapse
got a new link for the flash tool? thhanks

hello bro flash toool link not working

This Thread is discontinued so i decided to update the unlocking methode one more time

[ROOT][MARSHMALLOW][HONOR 4C] Root, Recovery & Bootloader Unlock by HassanMirza01

DESCRIPTION:
Today i found the New Root & Installing Custom Recovery(TWRP) in MARSHMALLOW ROM surely...
I will Provide correct info and help......All This you are gonna do is At your Own Risk... Damage to your device of any type is at your Own Responsibility,,, Don't point finger at me or I will Just Laugh at you...
PREREQUISTES:
First of all, You should Unlock Bootloader so that on every reboot, Your Root shouldn't damage. You can unlock bootloader by simple procedure...and also enable the USB Debugging from Developers options in settings...
PROCEDURE:
FOR UNLOCKING BOOTLOADER, FOLLOW THIS
Download the Attached PC Software Named "Huawei Product ID Generator" then Extract this zip file...
Now open it, fill all Info in it and it will Generate a Product ID for your Phone....
Now go to this site Unlocking Code website
Login to this site using your Huawei id which you made in themes store or in huawei cloud!!
Use the Serial Number Written on BACK OF YOUR PHONE..!!
Fill like, smartphone>Product Model should be "HUAWEI Y300-0000"
then fill all fields and captcha also.. Click Submit and get the UNLOCKING CODE....
you can unlock bootloader wid that code then and root permanently....
After receiving the unlock code, write down the code;
Now go in your 4C's Settings>About Phone.
Then tap on Build number 10 times,,, you will get the Developers options in Last of Settings app. Open Developers option and Turn On the USB DEBUGGING.
Now connect your device to PC in MTP/FILES mode and then install the ADB drivers for it....
To install adb drivers correctly, use the Software Adb Driver Installer from here
LINK FOR ADB DRIVER INSTALLER
Full ADB folder is also attached Below.... put this folder in drive C.
Now Direct the cursor on the folder ADB, hold Shift and the right mouse button and choose "Open Command Window";
connect your phone to the PC in the "media device";
at the command prompt prescribe ADB Devices ;
then we write ADB reboot bootloader (the device will reboot mode fastboot);
then typed fastboot oem unlock **************** (where the asterisks replace unlock code);
BOOTLOADER UNLOCKED NOW!!
Now You are Ready to install TWRP recovery in Marshmallow first.... Download the Root and TWRP recovery File from here...
This File Also contain Stock Recovery of Marshmallow Rom
4C Root+TWRP by [email protected]
After this, unzip it and better come again in Fastboot Mode like above as explained, this time, move the recovery file to the adb folder which you want to install.
After that, type fastboot devices to see if your device is correctly attached to PC or Laptop. if yes then type this command in cmd to install the Custom Recovery(TWRP) in your phone.
fastboot flash recovery twrp.img
Then
fastboot reboot
This will reboot your phone and TWRP installed.
Gonna Done Root now... READ CAREFULLY... ROOTING MARSHMALLOW IS NOT EASY...
Download This Zip File and then Go in TWRP recovery and swipe for allow modifications...... and then flash that zip file named 1.zip...
After its done,, restart your phone and if it promp to install su, ignore it....
Open supersu app installed in your phone and let it update its binaries...when done, reboot to recovery again and this time flash This File.
Then reboot your phone and then supersu will be stable,,,
Now you have Successfully Rooted Marshmallow
Hit Thanks and Support me if you Like and get help from this thread...Thank you...
This is Based on Stock Huawei Kernel, Not compiled by Me...
Contributors:
@HassanMirza01
Mohamed A. Abd Ellatif
Version Information:
Status: Stable
Stable Release Date: 2015-09-28
Created on: 2016-02-19
Last Updated on: 2016-04-09

Reserved

Is this is TWRP for Marshmallow? Because the recovery files.you have uploaded are dated 25th September 2015?

@mfbcool yes...this is for Marshmallow... But dont swipe allow modifications!!
Member gettin error after swiping...just do read only...

I root my device by this method yesterday
but today root not work in titanum backup
I check it by root checker and everything is ok

Even though this method works, I would not recommend moving SuperSU to system partition. I didn't moved it and still SU permissions are working fine. I say so because Chainfire in his new SuperSU adopted a 'Systemless Root' method that roots without modifying the system partition so that apps like Android Pay work properly. He achieved this by patching the Boot image and so root is installed in boot image and is enabled at every boot (that's why you may experience some boot loops after rooting). This makes taking OTA updates and unrooting the device easier as you can unroot by flashing the Stock Boot.img instead of flashing the whole system partition.
I believe moving SuperSU to system partition destroys the main purpose and idea Chainfire had while making SuperSU compatible with Marshmallow. We all know EMUI won't update on Rooted devices. So it would be a pain to reflash whole Stock System Partition before taking OTA.

Hi thanks, I'm root my mobile I'm in android 6.0 now how to get back to kikkat a stock rom from twrp

@G E N E R A L open supersu app and tick the mount name separation and restart phone... Titanium, kingroot all will recognize root
Hit thanks if it helps....
@TMDMOOSA if you wanna go back to KK, Flash stock recovery first!!
Then flash the back pkg B320, then B070
If you gets error, flash middle pkg of chc rom and then flash directly KK Rom usin stock recovery!!

hi
i have a problem
by flashing file 1.zip phone reboot twice and screen go black and nothing happens after
by flashing the ROM problem fix but i cant root my phone
i try this three times!!
what can i do?
thnx

@inshaalmirza
hello, I by mistake flash the root.zip of lollipop to my phone running marshmallow. Now my phone is stuck on bootscreen. what should I do now. adb is not working

onlyankush_s said:
@inshaalmirza
hello, I by mistake flash the root.zip of lollipop to my phone running marshmallow. Now my phone is stuck on bootscreen. what should I do now. adb is not working
Click to expand...
Click to collapse
this happened for me by flashing right zip file!!!
no solution??
i wipe all the data (even system data) by custom recovery and turn off the phone and hold power volume down and up together
by doing this if you have ROM file in your sd , new ROM will be instal on your device
just please tell me how i can root my phone??

@inshaalmirza @ mfbcool please reply what to do
onlyankush_s said:
@inshaalmirza
hello, I by mistake flash the root.zip of lollipop to my phone running marshmallow. Now my phone is stuck on bootscreen. what should I do now. adb is not working
Click to expand...
Click to collapse

onlyankush_s said:
@ mfbcool please reply what to do
Click to expand...
Click to collapse
Flash the complete Marshmallow ROM through Stock Recovery.

matinone said:
hi
i have a problem
by flashing file 1.zip phone reboot twice and screen go black and nothing happens after
by flashing the ROM problem fix but i cant root my phone
i try this three times!!
what can i do?
thnx
Click to expand...
Click to collapse
no one??
please

@onlyankush_s go in fastboot and then flash the system.img again.... Or flash stock M wid stock recovery...

@matinone there is written that flash supersu again after flashing 1.zip
Flash supersu zip too and tell... Or flash srock rom again by same method i told in most previous posr.... I am sick right now thats why replying late!!

inshaalmirza said:
@matinone there is written that flash supersu again after flashing 1.zip
Flash supersu zip too and tell... Or flash srock rom again by same method i told in most previous posr.... I am sick right now thats why replying late!!
Click to expand...
Click to collapse
thanks a lot!!!
it worked
by the same steps.it look like i got lucky this time
hope you get better soon

hi
plz help
i flash stock recovery and my phone go to rescue mode
help

I have successfully built TWRP 3.0.0-0 for our device which fixes the weird swipe to allow modifications bug and is fully compatible with Android 6.0 Marshmallow.
See here: http://forum.xda-developers.com/android/development/recovery-twrp-3-0-0-0-huawei-honor-4c-t3349495
Also, to re-flash Stock ROM, you don't need to flash Stock Recovery. Huawei phones have 2 inbuilt recoveries. The second recovery (which is the Stock) can be accessed by 3 buttons method (Power + Volume Up + Volume Down).

@mfbcool i saw that thread early... Great work man... I know huawei have 2 inbuilt recoveries but 2nd one is erecovery and thats of no use at all... I tried it too many times!! If twrp 3.0 can flash update.app files,,, it gonna rocks , wish u best of luck man!! You did it

A2017G Bootloader mode on 7.1.1?

EDIT: Fixed! Big thanks to @S0wL , @bkores , @tamahouse02 and @tron1 for the help. I made a guide to help other people with the same problem:
Guide to get TWRP again HERE
Okay, it seems to me that I messed up kinda badly. The phone is fully operational, but after I got to 7.0 the stock recovery replaced good ol' TWRP... which left me with an unlocked bootloader and an useless recovery. I have no root, and that's pretty much the only thing that matters to me. I downloaded @bkores 's Axon7Toolkit but there is NO way to get fastboot on the damned thing. After the program tries to get to bl mode (I assume adb reboot bootloader?) the ZTE logo flashes and the unlocked BL image appears, then the phone starts as normal.
Same thing with the leaked 7.1.1, no difference.
I tried EDL, recovery, that shady factory test mode thing, no one gives fastboot... Any ideas as to why I can't get there??+
I suspect it may be something related to the OEM unlocking option in the dev options, but it is set to ON and greyed out. so no idea

Try the menu on the boot screen.

Choose an username... said:
Okay, it seems to me that I messed up kinda badly. The phone is fully operational, but after I got to 7.0 the stock recovery replaced good ol' TWRP... which left me with an unlocked bootloader and an useless recovery. I have no root, and that's pretty much the only thing that matters to me. I downloaded @bkores 's Axon7Toolkit but there is NO way to get fastboot on the damned thing. After the program tries to get to bl mode (I assume adb reboot bootloader?) the ZTE logo flashes and the unlocked BL image appears, then the phone starts as normal.
Same thing with the leaked 7.1.1, no difference.
I tried EDL, recovery, that shady factory test mode thing, no one gives fastboot... Any ideas as to why I can't get there??+
I suspect it may be something related to the OEM unlocking option in the dev options, but it is set to ON and greyed out. so no idea
Click to expand...
Click to collapse
Sounds like the issue is with the ROM like it is somehow blocking you from accessing bootloader mode. It's definitely not my toolkit.

Choose an username... said:
Okay, it seems to me that I messed up kinda badly. The phone is fully operational, but after I got to 7.0 the stock recovery replaced good ol' TWRP... which left me with an unlocked bootloader and an useless recovery. I have no root, and that's pretty much the only thing that matters to me. I downloaded @bkores 's Axon7Toolkit but there is NO way to get fastboot on the damned thing. After the program tries to get to bl mode (I assume adb reboot bootloader?) the ZTE logo flashes and the unlocked BL image appears, then the phone starts as normal.
Same thing with the leaked 7.1.1, no difference.
I tried EDL, recovery, that shady factory test mode thing, no one gives fastboot... Any ideas as to why I can't get there??+
I suspect it may be something related to the OEM unlocking option in the dev options, but it is set to ON and greyed out. so no idea
Click to expand...
Click to collapse
Feel the same, 7.1.1 stock recovery is evil, it keep coming back after flash twrp. LOL
Here what I didi to get twrp on 7.1.1:
1. Use axon7tool -w recovery (twrp of couse)
2. Watch closely the cmd, when it said "Successful!","Reboot in 5 second" - unplug your phone
3. Use Volume Up + Power to get to recovery (twrp)
4. Mount > Mount System (dont check read only)
5. Flash something - I don't know - But I get the feeling that it stop stock recovery coming back - I personally flash Chinese Modem (because I have to ))
6. Reboot system

@bkores Yeah I'm pretty sure it's not your toolkit since I can't access it even with key comb, adb, option on the unl bl page...
@lafester Nope, tried many times. It just boots to normal whenever I select fastboot
@tamahouse02 Well I believe that should work, but I can't get axon7tool not to crash... I'll keep trying, maybe it's a driver or sth.

Choose an username... said:
@bkores Yeah I'm pretty sure it's not your toolkit since I can't access it even with key comb, adb, option on the unl bl page...
@lafester Nope, tried many times. It just boots to normal whenever I select fastboot
@tamahouse02 Well I believe that should work, but I can't get axon7tool not to crash... I'll keep trying, maybe it's a driver or sth.
Click to expand...
Click to collapse
Have you restart after install zadig driver?
1. From system: adb reboot edl
2. Install zadig driver
3. Hold "Volume Up + Power"
4. Enter system again: adb reboot edl
5. axon7tool -w recovery

tamahouse02 said:
Have you restart after install zadig driver?
1. From system: adb reboot edl
2. Install zadig driver
3. Hold "Volume Up + Power"
4. Enter system again: adb reboot edl
5. axon7tool -w recovery
Click to expand...
Click to collapse
yes, like 4 times already. I even used the stock Qualcomm COM3 drivers... no dice.
the thing is that I had to do the same when I did the stuff on android 6 and it worked after some time. I even wrote the procedure on another thread xd

Choose an username... said:
yes, like 4 times already. I even used the stock Qualcomm COM3 drivers... no dice.
the thing is that I had to do the same when I did the stuff on android 6 and it worked after some time. I even wrote the procedure on another thread xd
Click to expand...
Click to collapse
Not same my axon7tool. I use this https://forum.xda-developers.com/axon-7/development/axon7tool-flash-backup-boot-recovery-t3514254

Bootloader Mode is Disable/strip in G variant, and if this is how ZTE is headed to future updates it seems like U will have a Disable Bootloader Mode as well.
If you guy can rollback to MM , you can Unlock there using @bkores tool.

DrakenFX said:
Bootloader Mode is Disable/strip in G variant, and if this is how ZTE is headed to future updates it seems like U will have a Disable Bootloader Mode as well.
If you guy can rollback to MM , you can Unlock there using @bkores tool.
Click to expand...
Click to collapse
I was thinking about that, but does mifavor let you roll back from an SD update? I'll try later, but i doubt it.
Besides from that is there any way to flash stuff from the stock recovery? It tells me that ZIPs have to be signed only

tamahouse02 said:
Feel the same, 7.1.1 stock recovery is evil, it keep coming back after flash twrp. LOL
Here what I didi to get twrp on 7.1.1:
1. Use axon7tool -w recovery (twrp of couse)
2. Watch closely the cmd, when it said "Successful!","Reboot in 5 second" - unplug your phone
3. Use Volume Up + Power to get to recovery (twrp)
4. Mount > Mount System (dont check read only)
5. Flash something - I don't know - But I get the feeling that it stop stock recovery coming back - I personally flash Chinese Modem (because I have to ))
6. Reboot system
Click to expand...
Click to collapse
In step 1, which TWRP version did you use? The latest 3.1.0.-0 ?

dnlilas said:
In step 1, which TWRP version did you use? The latest 3.1.0.-0 ?
Click to expand...
Click to collapse
Official 3.0.4.1

@tamahouse02
The latest "official" TWRP is at TWRP site https://twrp.me/devices/zteaxon7.html , version 3.1.0-0.
Is there any problem using it instead of the previous "official" 3.0.4.1 ?
Edit: I also read on TWRP site:
"Note many devices will replace your custom recovery automatically during first boot. To prevent this, use Google to find the proper key combo to enter recovery. After typing fastboot reboot, hold the key combo and boot to TWRP. Once TWRP is booted, TWRP will patch the stock ROM to prevent the stock ROM from replacing TWRP. If you don't follow this step, you will have to repeat the install."
This is in sync with your information requiring to reboot immediately to TWRP (step 2 and 3).

dnlilas said:
@tamahouse02
The latest "official" TWRP is at TWRP site https://twrp.me/devices/zteaxon7.html , version 3.1.0-0.
Is there any problem using it instead of the previous "official" 3.0.4.1 ?
Edit: I also read on TWRP site:
"Note many devices will replace your custom recovery automatically during first boot. To prevent this, use Google to find the proper key combo to enter recovery. After typing fastboot reboot, hold the key combo and boot to TWRP. Once TWRP is booted, TWRP will patch the stock ROM to prevent the stock ROM from replacing TWRP. If you don't follow this step, you will have to repeat the install."
This is in sync with your information requiring to reboot immediately to TWRP (step 2 and 3).
Click to expand...
Click to collapse
I use 3.0.4.1 because I flash plenty things before without any issue, so I keep using it.
After write recovery by axon7tool, it's reboot automatically and override the recovery, that why I have to unplug to stop the reboot, and also flash all I can - fortunaeally​ it also stop recovery be overrided

@tamahouse02 sorry to ask, but is the a7tool of the link a fixed version? how does it differ from the one i have?

I've been in the same situation like you @Choose an username... Updated to nougat on G model and I had not bootloader. This is what I did :
1. Downloaded the tool from here https://forum.xda-developers.com/axon-7/development/tool-axon7toolkit-t3573108
2. Installed the driver using the install driver option that you can choose once you connect you phone to your computer
3. Use the tool to perform the unlock bootloader command again even though you have unlocked it before
4. Use the tool to install twrp, it will boot the phone in twrp
5. Flash Supersu before you boot the system first time after flashing twrp
5. Install whatever version of android want after

@S0wL Funny, I had to use Zadig to make it work. I'll try r n, thx

Choose an username... said:
@S0wL Funny, I had to use Zadig to make it work. I'll try r n, thx
Click to expand...
Click to collapse
Use Zadig then and let me know if it worked

@S0wL I can't use bootloader unlock on it, says "This option does not support your device!"
How did you do this??

Choose an username... said:
@tamahouse02 sorry to ask, but is the a7tool of the link a fixed version? how does it differ from the one i have?
Click to expand...
Click to collapse
I try your version once, but it seems not work for me, so I keep using the old one.
---------- Post added at 03:42 AM ---------- Previous post was at 03:39 AM ----------
Choose an username... said:
@S0wL I can't use bootloader unlock on it, says "This option does not support your device!"
How did you do this??
Click to expand...
Click to collapse
I thought you had already unlocked bootloader? Why have you done it twice?

[GUIDE] All-In-One noob friendly guide for xperia X (Root/Bootloader/Rom)

[UPDATE]: USE THIS ONLY FOR NOUGAT 7 OR 7.1! THERE IS A DIFFERENT GUIDE FOR ANDROID OREO!
https://forum.xda-developers.com/xperia-x/how-to/root-xperia-x-f5122-android-n-34-2-2-47-t3594502 (Written by YasuHamed, not me!)
If you are not interested in android Oreo, or you want to go back to Nougat, this guide is still valid! [End of Update]
This is a guide for newbies or for people that are simply confused. If you have any questions, you can always ask me, and I will reply. but please make sure you haven't made mistakes and do not ask about things that are already stated here. Let's go!
BEFORE DOING ANYTHING, NOTES
-make sure you have installed ADB : https://forum.xda-developers.com/showthread.php?t=2588979
-make sure ADB can read your phone with the correct drivers installed. If you have trouble with that, read "DRIVERS" section
!It is absolutely necessary to install the drivers correctly!
-Backup your stuff if you have any, you will need to delete everything from the phone
-Enable USB debugging
-Note: some of these instructions apply to Windows OS only!
-Note: links to downloads have been shortcutted as much possible to make it easier for you!
-Find some stock roms here! https://forum.xda-developers.com/xperia-x/how-to/sonyx-f5121-downgrade-8-0-0-to-7-1-1-to-t3754986
(Credit: HEKER510)
-Warning: you will lose your warranty!
-I am not responsible for any damage done to your device.
BACKUP DRM KEYS (OR WORKAROUND)
You may want to unlock your bootloader. If you unlock it without backing up the DRM keys, you will lose them. I did that mistake and I regret it. If you already did, there is an alternative solution, skip to step 8.
1) If you are running android 7 nougat, you will need to downgrade to MM. If you are running MM, skip to step 7.
2) You will need to wipe everything before rolling back, so if you have any data back it up
3) Download any stock MM 6.0.1 firmware for the xperia X. You can find one here : https://mega.nz/#!1xRj2CYS Decryption key: !qBVi7yky8AL84eUF3bpTTGQ2YmN0ePCjc-eSDZGIZCI
Watch out: if you have the dual SIM model, F5122, you need to download accordingly!
For more firmwares, check "BEFORE DOING ANYTHING"
4) Download the latest flashtool: http://www.flashtool.net/downloads.php
Upon installation, tick on fastboot, flashmode drivers! If it didn't ask you, go to the installation folder and run Flashtool-drivers.exe. Please read "DRIVERS" section!
5) Flash the .tft file
How to flash?
0. Go to "C:\Users\[Your PC Name]\.flashTool\firmwares" , and put your firmware .ftf file in there!
1. Open Flashtool and click on the lightning bolt icon (first one from the left)
2. In the prompt, choose flashmode.
3. Under firmware, click on the version you put (It should probably only be one option)
4. Under wipe , tick everything. Under the others, do not make any changes.
5. Click "Flash"
6. When the popup appears, connect your device. It needs to be powered off, and connected while you are holding the
"volume down" button.
7. Wait for it to finish.
8. Done. Boot up the device, it might take some time to open so don't worry.
Click to expand...
Click to collapse
6)If your phone bootloops, try flashing again or a different firmware and make sure you followed the steps correctly.
7) Once your phone successfully boots android MM, use Dirtycow to get your DRM keys out: https://forum.xda-developers.com/crossdevice-dev/sony/universal-dirtycow-based-ta-backup-t3514236
8) If you unlocked the bootloader before backing up your keys, you can use DRM kernel fix. You can get it here: https://forum.xda-developers.com/xperia-x/development/kernel-drm-fix-nougat-t3530849 Before using it check out the custom rom that includes this fix and other things.
UNLOCK BOOTLOADER
This is relatively easy and you can follow official sony instructions to do it.
1) Go to your phone settings, developer options, and enable OEM unlock
"But there is no developer options!" -Go to the bottom of your settings, system, about phone, and tap multile times on "Build Number", also at the bottom.
Click to expand...
Click to collapse
2) If you haven't already , install ADB fastboot and configure drivers (Link on top )
3) Follow the steps on the Sony website to get your unlock code: https://developer.sonymobile.com/unlockbootloader/email-verification/
4) After unlocking, a warning message on boot is normal!
INSTALL RECOVERY
Installing TWRP on your xperia X is very important, since you can flash zips and img files so easily, plus wipe, backup and other features.
1) Download the TWRP .img file: https://androidfilehost.com/?w=files&flid=197369 (Credit: eagleeyetom )
2) Make sure you have USB debugging enabled
3) Open your downloaded twrp folder
4) Run CMD in that folder (shift + right click inside the folder, Open CMD here )
5) Connect your Xperia X to your PC
6) Type these lines:
adb reboot bootloader
fastboot flash recovery recovery.img [where recovery.img is your twrp file name]
fastboot reboot
7) If no errors, twrp is now installed. Once your phone boots , turn it off,. To access TWRP recovery hold power button and volume down button until the TWRP menu appears.
STOCK ROM, ROOT
If you just want to root and not interested in additional features and tweaks, you can simply flash SU through TWRP to get your phone rooted.
Note: Current best stock ROM available: 7.1.1 (252) - better features than older ver, and good battery life.
0) Install your desired stock firmware using the exact same previous instructions, (under DRM section) with flashtool.
1) Download SuperSu
Or magisk, using YasuHamed guide mentioned on top, but I have not tested with anything other than Oreo 8.0
Use magisk if you want more stability / root features (like hide root from apps, modules )
2) copy it anywhere on your phone
3) Run TWRP
4) Tap on install
4) Flash the file
5) Reboot, you are now rooted
6) Insert your DRM keys if you have them
Custom ROMS
After unlocking the bootloader and installing TWRP this is the best way to go in order to get full root, tweaks.
https://forum.xda-developers.com/xperia-x/development/rom-xperia-x-pexorom-v1-0-0-f5122-f5121-t3590552
^ This is a very good custom ROM made by prmk74. You can see its features in his thread.
1) Download the rom and copy it to your phone
2) Run TWRP
note: It is recommended to wipe dalvik, cache, data ( your storage partition doesn't need to be wiped)
3) Tap install, find your downloaded file and execute
note: It is recommended to wipe dalvik, cache, data ( your storage partition doesn't need to be wiped)
4) Follow on-screen instructions, do not stop the booting after finishing the installation, it will take some time
5) Insert your DRM keys if you have them
6) For those who lost their keys: Now the functions like vivid image mode are working properly.
DRIVERS
For Windows 8/8.1/10 users, how to solve driver problems:
1) Press the Windows key + R together and in the ‘Run’ box type: shutdown.exe /r /o /f /t 00
– Now make the following selections to boot into the Start Up Setting Screen: Troubleshoot > Advanced options > Start Up Settings > Restart
– Then, when the machine restarts, select number 7 i.e. “Disable driver signature enforcement”. Your machine will start with Driver signing enforcement disabled until the next reboot.
B) Now you can install the Flashtool drivers. Go to the flashtool install location and run the drivers.exe again, check fastboot and flashmode
– Windows will warn that the driver is not signed and will require you to confirm the installation.
– Once the installation is complete, reboot the machine
TO CONCLUDE:
This is what you may want to do to get the most out of your new xperia x:
1) Backup DRM
2) Unlock BL
3) Install TWRP
4) Flash Persian (or a different rom) through TWRP (And subscribe to the thread so you receive updates)
5) Restore DRM
Notes:
None of the links, tools are of my work, I'm just writing a guide for my fellow XX owners

^^ this guide is so really good :3. I post flash script for someone dont know how to find it ^^
unzip it in this position.
C:\Users\[user-name]\.flashTool\mydevices

max26292 said:
^^ this guide is so really good :3. I post flash script for someone dont know how to find it ^^
unzip it in this position.
C:\Users[user-name]\.flashTool\mydevices
Click to expand...
Click to collapse
Thanks!

Thanks for this, I need some help!
All was fine until I tried flashing the recovery, comes back "partition unknown" error. I was unable to bring the device up under an adb device only as a fastboot device.
34.0.A.1.264_R3A firmware.
Different official sony driver (Sony bootloader guide driver didn't work)
Device now hangs on the Sony logo after boot messgae warning "OEM bootloader unlocked, device not trusted," any help would be appreciated.

brianx87 said:
Thanks for this, I need some help!
All was fine until I tried flashing the recovery, comes back "partition unknown" error. I was unable to bring the device up under an adb device only as a fastboot device.
34.0.A.1.264_R3A firmware.
Different official sony driver (Sony bootloader guide driver didn't work)
Device now hangs on the Sony logo after boot messgae warning "OEM bootloader unlocked, device not trusted," any help would be appreciated.
Click to expand...
Click to collapse
These USB drivers are very annoying to work with. I got mine to finally work using a program called ADB driver installer. http://adbdriver.com/downloads/ Choose automated installation and try what I said. I believe it should fix your problem, after installing the drivers reboot and flash again.
Other than that, I have to ask are you 1000% sure you used the exact commands?
I saw another thread someone mistook
"flash recovery recovery.img" for "flash recovery.img"
"recovery" should be included before the recovery file name

brianx87 said:
Thanks for this, I need some help!
All was fine until I tried flashing the recovery, comes back "partition unknown" error. I was unable to bring the device up under an adb device only as a fastboot device.
34.0.A.1.264_R3A firmware.
Different official sony driver (Sony bootloader guide driver didn't work)
Device now hangs on the Sony logo after boot messgae warning "OEM bootloader unlocked, device not trusted," any help would be appreciated.
Click to expand...
Click to collapse
Why didn't the sony guide work? It worked for me. Just so you know, the "device cant be trusted" message is appearing on everyones' phones after unlocking the bootloader, it's not a problem or something

the part of restoring DRM is skipped,
please xplain

YasuHamed said:
the part of restoring DRM is skipped,
please xplain
Click to expand...
Click to collapse
I know, as I said there is room for improvement. The reason I did not include it is because I never did it myself, so I don't want to write something wrong or something that could lead to problems. I write something only if I am 100% sure. If anyone of you is kind to offer that piece so the guide is complete I will be glad

FoxTheLegend said:
Why didn't the sony guide work? It worked for me. Just so you know, the "device cant be trusted" message is appearing on everyones' phones after unlocking the bootloader, it's not a problem or something
Click to expand...
Click to collapse
Ok I figured out what I did wrong and was able to amend another issue I edited out of this post.

brianx87 said:
Ok I figured outwhat I did wrong (able to boot into the os and warning message no longer an issue ) and the issue I am now facing is that twrp is hanging on the boot screen. Is this version of twrp built to a specific version of android?
Click to expand...
Click to collapse
What do you mean hanging? the twrp logo frozen?

FoxTheLegend said:
What do you mean hanging? the twrp logo frozen?
Click to expand...
Click to collapse
Working now, used a previous version of twrp by mistake. Using latest build works fine now, have to wait to get home from work to proceed with the rest, annoying procedures this stuff but your guide is great.

brianx87 said:
Working now, used a previous version of twrp by mistake. Using latest build works fine now, have to wait to get home from work to proceed with the rest, annoying procedures this stuff but your guide is great.
Click to expand...
Click to collapse
Thanks, Im glad to it works now

FoxTheLegend said:
I know, as I said there is room for improvement. The reason I did not include it is because I never did it myself, so I don't want to write something wrong or something that could lead to problems. I write something only if I am 100% sure. If anyone of you is kind to offer that piece so the guide is complete I will be glad
Click to expand...
Click to collapse
thank you for the answer sir
i am unable to find any twrp that work for my F5122, it always bricks and i have to reset.
is there any twrp recovery image that works correctly with f5122?

YasuHamed said:
thank you for the answer sir
i am unable to find any twrp that work for my F5122, it always bricks and i have to reset.
is there any twrp recovery image that works correctly with f5122?
Click to expand...
Click to collapse
Hmm.. Did you try the one from the poison thread? I myself have still the old version installed (not 3 or 3.1) if I find it on my pc I will share it with you

FoxTheLegend said:
Hmm.. Did you try the one from the poison thread? I myself have still the old version installed (not 3 or 3.1) if I find it on my pc I will share it with you
Click to expand...
Click to collapse
I have to modified kernel
all i want is to boot it via fastboot command
for example i have the rooted kernel SU installed (but battery drain is high) so i what wana do is flashing kernel with all securities OFF and then with twrp image i will do
Code:
fastboot boot twrp.img
i will boot the X in to twrp and i will flash SUPERSU via twrp.
thanks all

YasuHamed said:
I have to modified kernel
all i want is to boot it via fastboot command
for example i have the rooted kernel SU installed (but battery drain is high) so i what wana do is flashing kernel with all securities OFF and then with twrp image i will do
i will boot the X in to twrp and i will flash SUPERSU via twrp.
thanks all
Click to expand...
Click to collapse
I see, but don't you want to figure out why it's not working normally? Noone has reported a similar problem

FoxTheLegend said:
I see, but don't you want to figure out why it's not working normally? Noone has reported a similar problem
Click to expand...
Click to collapse
since there is no offcial twrp for X out yes and only DORA (XA) is available) even XA don't work for X
so either twrp 2.8, 3.0 or 3.1 any should just boot in order to let us flash superSU.

YasuHamed said:
since there is no offcial twrp for X out yes and only DORA (XA) is available) even XA don't work for X
so either twrp 2.8, 3.0 or 3.1 any should just boot in order to let us flash superSU.
Click to expand...
Click to collapse
=-= try to use this command fastboot flash recovery [your_recovery_name].img
I use f5122 and flash successfull twrp 3.0.2 and 3.1. with this, i flash some kernel and rom without any problem.

Everything is working good for me now, the only issue now is restoring the DRM keys, has anyone found a credible source for doing this on this device?
How can I be sure I have a full root? I can't seem to be able to uninstall some of the bloatware only disable it!

brianx87 said:
Everything is working good for me now, the only issue now is restoring the DRM keys, has anyone found a credible source for doing this on this device?
How can I be sure I have a full root? I can't seem to be able to uninstall some of the bloatware only disable it!
Click to expand...
Click to collapse
Well titanium backup can assure you but I don't see why you wouldn't have full root... You need an app uninstaller to uninstall bloatware, it can't be done through the settings you know that right

Android 7.1.1 Doogee X5PRO

I have searched, found and tested this rom.
It is a beta but it works very well, I leave the links of the original web where all the information of download and installation is.
I hope this humble contribution helps you.
web : http://getbest.ru/doogee_x5pro_nougat_beta.htm
TWRP : https://drive.google.com/file/d/0B3nYb3vN0P9VakpJWVU1Unh1NGc/view?usp=sharing
Flash Tool Firmware x32 : https://drive.google.com/file/d/0B3nYb3vN0P9VVGZvZlVIeEdQcG8/view?usp=sharing
Flash Tool Firmware x64 : https://drive.google.com/file/d/0B3nYb3vN0P9VVGZvZlVIeEdQcG8/view?usp=sharing
Super SU : https://s3-us-west-2.amazonaws.com/supersu/download/zip/SuperSU-v2.79-201612051815.zip

Hi, and thank you, I already had downloaded the BETA3 version from needROM.com but it seems this is updgraded
---------- Post added at 06:35 PM ---------- Previous post was at 06:33 PM ----------
Just a question, I have to use the Flashtool to flash the firmware and after that the TWRP and Supersu options?

I've been using beta4 (and beta3 previously) for months and quite like them. Also, since the original factory rom is filled with adaware, isn't as up-to-date with Android's security patches and doesn't pass SafetyNet, you're gaining a lot and not losing anything switching or rooting for that matter.
Though I still prefer magisk over rooting since it's more secure and more than enough for adaway.
juancarloscuba said:
Just a question, I have to use the Flashtool to flash the firmware and after that the TWRP and Supersu options?
Click to expand...
Click to collapse
You can but you don't have to. I had a problem flashing beta4 and twrp at one go but booting the phone once with just beta4 and then powering off and flashing twrp and\or rooting afterwards solved that.
Btw, the dev is developing gesture modules for the kernel (built-in beta4) and an app to go with them: http://getbest.ru/kernel_gesture.htm I didn't find the feature useful enough to keep around but it works as advertised and, once again, magisk was enough.
Overall, the rom is an absolute must as far as I'm concerned and I wouldn't be using this phone if it wasn't available. It would have been nice if the dev could keepup with android's patches better but seeing how he's doing a better job than doogee and for free I can't really complain.

Do the camera and fingerprint work?

Hi. I wish to give my really thanks to the developer of this rom.
It solve my problems:
Stock rom R16:
sim card WIND (IT) poor 4G/LTE reception
sim card VODAFONE (IT) no 4G/LTE reception
(tested switching 1-2, various city zones)
This Rom:
both full 4G/LTE reception!!
M.A.

Hello Maria and thanks for your experience.
What can you say to me about the fingerprint and camera functionality?
Do they work fine on this rom?

****_ve said:
I have searched, found and tested this rom.
It is a beta but it works very well, I leave the links of the original web where all the information of download and installation is.
I hope this humble contribution helps you.
web : http://getbest.ru/doogee_x5pro_nougat_beta.htm
TWRP : https://drive.google.com/file/d/0B3nYb3vN0P9VakpJWVU1Unh1NGc/view?usp=sharing
Flash Tool Firmware x32 : https://drive.google.com/file/d/0B3nYb3vN0P9VVGZvZlVIeEdQcG8/view?usp=sharing
Flash Tool Firmware x64 : https://drive.google.com/file/d/0B3nYb3vN0P9VVGZvZlVIeEdQcG8/view?usp=sharing
Super SU : https://s3-us-west-2.amazonaws.com/supersu/download/zip/SuperSU-v2.79-201612051815.zip
Click to expand...
Click to collapse
Can you please assist me with flashing this ROM? (either 32bit or 64bit) - I've tried using the Flash Tool guide, but with 32bit the clean install scatter file does nothing, and with 64bit the clean install scatter file comes up with error: "chip type not match!! target efuse value: 0xa4020000"
I've tried with and without battery, I have installed Android USB driver, and I've followed this guide: https://androidmtk.com/flash-stock-rom-using-smart-phone-flash-tool
Please help!

The Seeker said:
Hello Maria and thanks for your experience.
What can you say to me about the fingerprint and camera functionality?
Do they work fine on this rom?
Click to expand...
Click to collapse
Hi.
My phone (X5pro) hasn't fingerprint reader.
The camera seems to work in normal way.
M.A.
P.S.: May be it depends by my phone, but sometimes touch is not reponsive; I have to push the power button ("stand-by") and push it again to have normal touch response.
---------- Post added at 07:24 PM ---------- Previous post was at 07:19 PM ----------
Racxie said:
Can you please assist me with flashing this ROM? (either 32bit or 64bit) - I've tried using the Flash Tool guide, but with 32bit the clean install scatter file does nothing, and with 64bit the clean install scatter file comes up with error: "chip type not match!! target efuse value: 0xa4020000"
I've tried with and without battery, I have installed Android USB driver, and I've followed this guide: https://androidmtk.com/flash-stock-rom-using-smart-phone-flash-tool
Please help!
Click to expand...
Click to collapse
The flash guide you linked is the right guide.
What exact model of phone you have?
Does the scatter and other files are in the same folder? (unzipped, you know).
Does the flashtool give any error message with the 32bit version?
Regards
M.A.

I tried both the 32bit and 64 bit versions of this rom, it's pretty good for a beta. However I had a problem with the screen going dark while using it and once the screen inverted colours randomly. Has anyone else had this problem with this rom? I'm currently using the android 6 stock rom but would love to get 7.1.1 working perfectly.

installed with SP flash tools x5pro-7.1-x32-BETA4 from a stock kernel 6.0 (R16)
with no luck. At booting snowcatPDA logo shows for a while and continuously reboots.
Flashed from ubuntu linux 16.04:
Download Only option (should I have choosen Firmware Upgrade?)
Scatter-loading File MT6735M_Android_scatter-WIPE-CLEAN_INSTALL.txt (should I have choosen MT6735M_Android_scatter.txt?)
I had the bootloader locked in development options (had it to be open?)
I also had USB debugging ON
Any tips?

xe7um said:
installed with SP flash tools x5pro-7.1-x32-BETA4 from a stock kernel 6.0 (R16)
with no luck. At booting snowcatPDA logo shows for a while and continuously reboots.
.....
Any tips?
Click to expand...
Click to collapse
Hi.
Now I'm at home.
Tomorrow morning, when I'll be at office I'll write down steps by steps I did.
(home... office..., reverse of natural manner, because I do all my mobile hobbies at lunch pause; at home PC is used by others )

Hello, here I am.
The follows are the steps, more or less, that I did.
(maybe you already did some of these)
1-Start from official R16 ROM
2- Developer option
#a. Enable USB debug​#b. Enable OEM unlock​
3- Security: allow unknown origin installation
4- Unlock bootloader
#a. Connect in fastboot, from ADB command mode:​type: adb reboot-bootloader ___ (Wait 1-3 second)​type: fastboot devices ___ (verify device is detected)​#b. verify bootloader unlock status​type: fastboot getvar all ___ and you get​= warranty: yes​= unlocked: no​#c. unlock bootloader​type: fastboot oem unlock ___ and you get​-> start unlock flow​---> on screen appear:​vol UP=Yes; void warranty, clear ALL data​vol DWN=no; no unlock​Press Vol UP​#d. verify bootloader unlock status​type: fastboot getvar all ___ and you get​= warranty: no​= unlocked: yes​#e. May be phone restart​
5- shut down phone ___ AND ___ get out battery
6- Flash phone with
MT6735M_Android_scatter-WIPE-CLEAN_INSTALL.txt​as per normal way (You know this , after some trying...)​
7- WITHOUT starting phone, ___ Flash TWRP with
MT6735M_TWRPx32_scatter.txt (or the 64, according to the ROM you flashed)​
9- Put battery in ___ AND___ start in TWRP recovery
#a. hold Vol Up, press ON button until appear a micro menu, release buttons​#b. choose recovery with Vol Up and confirm with Vol Down​
10- in recovery, choose wipe, and on bottom of the screen slide for factory reset
11- on TWRP main, choose reboot, power off
12- get out battery for some seconds
13- get in battery and start up (It can take a lot, may be leave the phone connected to main)
This is what I did (if I remember all the single steps...)
Try and report to us.
M.A.

Nope!, in step 9 when trying to start in TWRP recovery I get a continuous bootloop showing SnowcatPDA logo

xe7um said:
Nope!, in step 9 when trying to start in TWRP recovery I get a continuous bootloop showing SnowcatPDA logo
Click to expand...
Click to collapse
Hummmm....
It seems won't go in recovery mode, I think.
Try this:
1- flash entire stock ROM
(may be take this ===http://www.doogee.cc/bbs/viewtopic.php?t=29=== just in case)
2- start phone normal, up to home screen (so the phone is as just brougt)
3- power off and try to enter stock Recovery
If it works (and your bootloader is unloked) then try this
Connect phone to PC in fastboot
and enter
fastboot devices (I do this each time, just in case PC don't detect phone)
fastboot boot recovery.img
where recovery.img is your TWRP
The phone should start in TWRP recovery
The fastboot boot recovery.img command
send recovery (kernel?) image to temp phone folder/ram
and boot from that.
It unaffect normal rom/recovery.
By this step, we check If your phone accept this TWRP and sort out some possible troubles.
M.A.

when doing 'fastboot boot TWRP-3.1.1-X5PROx32.img' I get:
USB transferring...
USB transmission OK
and doesn't reboot into recovery but it boots normally
since I'm doing this from stock kernel R16 I wonder whether it's 32 or 64 bits
However I've found recovery-twrp-3.2.0-git-20171204.img that boots!. But I don't have scatter file, only .img! This recovery is from Lineage 14.1, but since this custom ROM installs from TWRP there is no need of scatter file

I've found another TWRP that boots with fastboot boot img: the TWRP recovery for 6.0 in needrom. This one has a scatter file

xe7um said:
I've found another TWRP that boots with fastboot boot img: https://www.needrom.com/wp-content/uploads/2016/12/TWRP_DG_X5Pro.rar
Click to expand...
Click to collapse
I get this error:
Needrom do not authorizing, the links referred by another website for download the ROMs.
The link must obligatory be clicked from of Needrom.com
Click to expand...
Click to collapse
Can you please link it correctly so we can download it?

The Seeker said:
I get this error:
Can you please link it correctly so we can download it?
Click to expand...
Click to collapse
Hi.
You have to select the file direct from the Needrom site.
www.needrom.com
(up)categories-doogee
on the right, click: Serial X
again, on the right, click: X5pro
and select the TWRP you desire.
(second line, second from left)
(click on "TWRP DG X5Pro (977 dls)")
Regards
M.A.
P.S.: even the link is
https://www.needrom.com/server/download.php?name=/2016/12/TWRP_DG_X5Pro.rar
you have to download from the site.

I'll try all this at the weekend, but my two cents are that it won't work. At first attempt I flashed BETA4 with MT6735M_Android_scatter-WIPE-CLEAN_INSTALL.txt (so no need to enter recovery and wipe cache/Dalvik) with a bootloop result.
My guess is that there are different ROM versions of X5 pro, and newest are incompatible with SnowcatPDA 7.1.1 firmware. Will see in a few days...

As I was suspecting I get a bootloop after logo. Now the question is: Is there a stable custom ROM (7.1 or newer) that I could use daily instead of MM 6.0 (R16) stock ROM?