Database Users

It's possible to port cyanide mod

Hi guys you know if it's possible to port cm 11.? If yes why nobody port Already?
Sent from my SM-P605 using XDA Free mobile app

It is an easier task for SM-P605 since it uses S800 CPU which has open source-ish drivers which can help devs a lot while compiling a rom from source. Looks like nobody wants to take on this yet since it requires lots of time and knowledge
SM-P600 & P601 & P602 are a bit unlucky since they use Exynos CPU's which we have less source and experience on. Somebody can port from Note 3 with experience in porting (should be easier than building ground-up drivers for now).

Cyanide? Rotfl

On a serious note though...
There have been (successful) bounties for new roms recently and I wonder if we could also get some CM / AOSP love
All we need is a willing CM dev & another bounty, right?
(I'm still on stock, no root, no knox tripping and I don't void my warranty for a touchwiz rom... I would for a CM / aosp rom + kernel though...)
edit: a working CM or AOSP rom + kernel would probably also attract more devs, since most roms are based on either one of them (e.g. slim, paranoid android, etc are all based on AOSP [with their own modifications of course])

I want to port it, but i'm not able to port a fully working ROM, and not have time to fix all.
Sent from my Nexus 5 using XDA Free mobile app

Wasn't clear from your post, did you try to port it but not get things working?
I will probably attempt to port CM11 to the P605. I just got one, and I've worked on OmniROM in the past but this is the first time I have tried to bring up a device from scratch so it will take some time (well, not really from scratch, I'm banking on the fact that the Note 3 and Note 10.1 2014 are quite similar so that that might hopefully save me some time). The other issue for me specifically is that the seal on the box was already broken when I got it so I might want to try to return it, if any issues crop up. So first I need to figure out if I can root it without tripping Knox so that I can do some diagnostic stuff and try and figure out if the device has any problems and/or was a returned device.
But if we're lucky, I think I can port CM, though most likely I won't have a lot of time to do this until mid-June so before then I'll just see what I can do in a short amount of time. Afterwards I'll attempt bringing up Omni as well but I'll attempt CM first since CM actually supports the Note 3 LTE (I tried doing an Omni bringup for Note 3 too, but ran into some issues and haven't had time to debug further).

Just noticed that cyanogenmod is apparently already working on a galaxy note 3 exynos build ( http://www.cyanogenmod.org/blog/this-week-in-cm-apr-26-2014 ) and since note 3 and note 10.1 2014 share the same hardware, i'm sure someone will be able to port it
(Xluco is doing pretty much the same thing with his kernel... porting features over from a note 3 exynos kernel)
I'm quite excited for this, cm will be reason enough for me to finally root my device and like I said a working cm rom + kernel will probably attract more devs (since a lot of roms are based on cm) [emoji106]
Gesendet von meinem SM-P600 mit Tapatalk

[09-06]SailfishOS & Multirom. How to set up guide

Hi sailors out there
When I'm going to read through the available sailfish threads the question about how to set up multirom & sailfish have been asked many times. So I thought I'm writing this little guide. I describe the procedure along the nexus 4 mako. But it have to be very similar on other devices like nexus 5 for example. The important parts that differs from mako are the kernel and modem image you've to use. I will describe the easiest way in my opinion. Experienced users have more capabilities to reach the goal. I will not describe how to install twrp recovery and unlock bootloader. Both are prequesites. Please use xda search or google to get this. But this little guide want's to be simple as possible. So let's begin .
------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Beginning:
First we have to detect you're actual setup and where you want to go. Because nexus 4 is up to date I think the most common goal is to run android 4.4 as primary and sailfish os as secondary. Atm I have only paranoidandroid 4.4 on my device and will show you how to get everything working.
------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Requirements / Download following parts:
kernel aosp: http://d-h.st/A99
kernel cm: http://d-h.st/CCn
aosp = android open source rom. Ask in you're rom thread what version you're on with the rom
cm = cyanogen mod rom. Ask in you're rom thread what version you're on with the rom
Modem for nexus4 in version 0.84: http://d-h.st/cIJ
or
through an app in play store: https://play.google.com/store/apps/details?id=com.bpear.makomodem&hl=de
sailfishOS ea4: http://releases.sailfishos.org/sfa-ea/sailfishos-mako-release-1.0.8.19-EA4.zip
cm 10.1.3: http://get.cm/get/aWH
Multirom manager in play store: https://play.google.com/store/apps/details?id=com.tassadar.multirommgr&hl=de
------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Before we're going on check up the following
1. All zip's you've downloaded have to be transferred on the device
2. Apps from play store are installed
------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Installation process
Reboot in twrp recovery
Flash the new kernel
Flash the modem 0.84 in twrp. Or via the modem flasher from playstore. It's you're decision.
Boot back into android
Proof the functionality in android withe the new modem and kernel. Wlan working? Bluetooth? NFC?
Open mutlirom manager. Follow the installation steps.
After some time you'll be back in android. You have now the right modem, kernel and and a twrp multirom version on you're device
After this. Please reboot back into twrp recovery
There select the advanced button.
Then the multirom button
Select add rom and mark up the entry sailfish os
Press next.
Now you can choose two zip files to flash
zip1: Select the cm10.1.3 zip file
zip2: Select the sailfish EA4 zip file
Installation process is beginning.
After this select reboot
You automatically went into multirom where you can cancel the automatic boot process for the primary rom. Then you can select which rom you want to start.
------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
And the most important thing is to read: http://forum.xda-developers.com/jolla-sailfish/general/qa-sailfish-n4-thread-devices-t2727330 for further question before you ask. I have described there many things to start with sailfish. If you find this useful think about to press the thanks button.

I'm a bit confused why do you insist on updating the modem? I checked my modem version and it is newer so I imagine there is no need to update. Also why use such an old version ov CM?
Just asking because I did all according to your instructions except I used newer CM build and didn't update my modem firmware as it was already newer. But for some reason Sailfish wont boot. It just hangs showing Google at start.

anttimonty said:
I'm a bit confused why do you insist on updating the modem? I checked my modem version and it is newer so I imagine there is no need to update. Also why use such an old version ov CM?
Just asking because I did all according to your instructions except I used newer CM build and didn't update my modem firmware as it was already newer. But for some reason Sailfish wont boot. It just hangs showing Google at start.
Click to expand...
Click to collapse
lol. and you ask why it won't work? It gave reasons for the instructions. Also look in the linked q&a thread at the bottom of first post. And here for you the relaese notes. Hope things becomes clear now. enjoy
Release Notes:
This release is based on SailfishOS 1.0.8.19 (Tahkalampi).
The Nexus 4 port is considered to be of alpha quality.
Though depending on your usage it might be stable enough for daily use.
Download & installation instructions:
* Install adb and fastboot
a. Debian/Ubuntu: apt-get install android-tools-adb android-tools-fastboot
b. Fedora: yum install android-tools
c. Mac OS X: Install Homebrew from http://brew.sh/, then: brew install android-platform-tools
d. Windows: See http://wiki.cyanogenmod.org/w/Doc:_fastboot_intro for instructions
MultiROM ≥v28 ability is in the image. See options of how to layout your MultiROM in #2 post below.
Alternatively, just have it as your primary ROM:
* Install Android 4.2.2 (JDQ39) to your Nexus 4
a. Instructions here: https://developers.google.com/androi...s#instructions
b. Download links can be found here: https://developers.google.com/androi...ges#occamjdq39
* Download CyanogenMod 10.1.3 for your Nexus 4
a. Perform Factory Reset and wipe contents of the /data/ partition in case of leftovers from previous ROMs
b. The file you want to download is cm-10.1.3-mako.zip
c. Download links can be found here: http://wiki.cyanogenmod.org/w/Install_CM_for_mako
* Download the Sailfish OS for Android image for "mako"
a. The file you want to download is http://releases.sailfishos.org/sfa-e...0.8.19-EA4.zip
b. Another flavour filled with demo content: http://releases.sailfishos.org/sfa-e...mo-content.zip
* Install CyanogenMod 10.1.3 on your Nexus 4
a. Follow the instructions at: http://wiki.cyanogenmod.org/w/Install_CM_for_mako
* After flashing the "cm-10.1.3-mako.zip" file, flash the Sailfish OS .zip file in the same way ("on top of it")
* Reboot bootloader, Sailfish OS should boot and be visible
We recommend reading through http://jolla.com/guide/ -- some parts may not apply to Nexus 4
HW Support status:
(Look for Nexus 4 row): https://wiki.merproject.org/wiki/Adaptations/libhybris
Click to expand...
Click to collapse
Also I stated in first post why I only described the way I've did

Ahh ok nevermind got it working once I used the older CM image. Wifi seems not to be working but I guess that is because I didn't downgrade my modem firmware. I guess I'll wait for a more stable builde or better yet buy a Jolla phone. Just like having the nexus 4 as I can test bunch of operating systems on it.

anttimonty said:
Ahh ok nevermind got it working once I used the older CM image. Wifi seems not to be working but I guess that is because I didn't downgrade my modem firmware. I guess I'll wait for a more stable builde or better yet buy a Jolla phone. Just like having the nexus 4 as I can test bunch of operating systems on it.
Click to expand...
Click to collapse
yes. that's a great benefit of this device Do you like sailfish?
With modem version 0.84 you have all parts working in sailfish and android

Ok thanks for the hint. I used to be one of the early adopters of Jolla, but couldn't use it as my daily phone so I sold it, but now that the OS has matured I think I maybe swithing back. Even though I still think Nokia N9 had far better UI experience. If only some would port N9 UI to Sailfish

anttimonty said:
Ok thanks for the hint. I used to be one of the early adopters of Jolla, but couldn't use it as my daily phone so I sold it, but now that the OS has matured I think I maybe swithing back. Even though I still think Nokia N9 had far better UI experience. If only some would port N9 UI to Sailfish
Click to expand...
Click to collapse
I feel the same, don't know why, but i just loved the N9 and the way the OS worked. I am not saying that sailfish is bad or something, but there Are somethings missing ...

v3ng3anc32002 said:
I feel the same, don't know why, but i just loved the N9 and the way the OS worked. I am not saying that sailfish is bad or something, but there Are somethings missing ...
Click to expand...
Click to collapse
They've practically done nothing since pre-release to improve and refine the UI, and so many incredibly basic features are missing (voicemail notifications, global copy and paste etc). The pulley menus are ropey and the active covers feature hasn't really been made use of much. They seem to be mainly concentrating on the Jolla Launcher for Android, which will definitely make them higher profile ... but if all their software engineers and UX guys are working on that instead of Sailfish itself, then it seems like cutting off their nose to spite their face.
I'm not a fan of Android and I can't see myself ever using WP or iOS, but the lack of progress and their production priorities are a bit dispiriting. I'm hoping that they're holding a lot of big and waited for improvements for update 1.1 (October).
Anyway, I'll keep it as my main phone for a bit longer, despite the fact that I have a Z3C coming early next week. Hope to see a decent Sailfish port for it soon.

mudnightoil said:
They've practically done nothing since pre-release to improve and refine the UI, and so many incredibly basic features are missing (voicemail notifications, global copy and paste etc). The pulley menus are ropey and the active covers feature hasn't really been made use of much. They seem to be mainly concentrating on the Jolla Launcher for Android, which will definitely make them higher profile ... but if all their software engineers and UX guys are working on that instead of Sailfish itself, then it seems like cutting off their nose to spite their face.
I'm not a fan of Android and I can't see myself ever using WP or iOS, but the lack of progress and their production priorities are a bit dispiriting. I'm hoping that they're holding a lot of big and waited for improvements for update 1.1 (October).
Anyway, I'll keep it as my main phone for a bit longer, despite the fact that I have a Z3C coming early next week. Hope to see a decent Sailfish port for it soon.
Click to expand...
Click to collapse
hope the same for the z1c, but don't how is the chance to see this port (soon or later).

Works nicely on my n4. Looking for getting gapps to run....

mudnightoil said:
They seem to be mainly concentrating on the Jolla Launcher for Android, which will definitely make them higher profile ... but if all their software engineers and UX guys are working on that instead of Sailfish itself, then it seems like cutting off their nose to spite their face.
Click to expand...
Click to collapse
This is just wrong
mudnightoil said:
I have a Z3C coming early next week. Hope to see a decent Sailfish port for it soon.
Click to expand...
Click to collapse
I bought a z1c after my N9 broke and I totally regret it. But I'll go on and try using it with Sailfish one day
paulle said:
hope the same for the z1c, but don't how is the chance to see this port (soon or later).
Click to expand...
Click to collapse
I tried using the hadk but like some other devices, there are gpu-problems with the z1c (see https://wiki.merproject.org/wiki/Adaptations/libhybris/gpu).
Keep an eye on IRC logs and on the status matrix in mer wiki
sorry for off-topic

iuno said:
This is just wrong
I bought a z1c after my N9 broke and I totally regret it. But I'll go on and try using it with Sailfish one day
I tried using the hadk but like some other devices, there are gpu-problems with the z1c (see https://wiki.merproject.org/wiki/Adaptations/libhybris/gpu).
Keep an eye on IRC logs and on the status matrix in mer wiki
sorry for off-topic
Click to expand...
Click to collapse
thank you for information, followed your links to look at. It seems there for the z1c is a lot of remaining, we will need patience.

iuno said:
I bought a z1c after my N9 broke and I totally regret it. But I'll go on and try using it with Sailfish one day
I tried using the hadk but like some other devices, there are gpu-problems with the z1c (see https://wiki.merproject.org/wiki/Adaptations/libhybris/gpu).
Keep an eye on IRC logs and on the status matrix in mer wiki
sorry for off-topic
Click to expand...
Click to collapse
Don't think I'll regret getting the Z3C, from a hardware perspective ... held one the other day, as a friend had been gifted one by Sony. It's absolutely superb. Granted, I despise Android .. but for when the Jolla ****s itself / runs out of battery / when GPS or a camera is needed / roaming / skype /outdoor use, I can suffer it until there's a Sailfish port.
Hopefully as work is already under way for the One Plus One, the identical SoC used in the Z3 & Z3C won't be too much additional work.
For all the moaning and groaning about Mediatek, I'm guessing the simplest and best port of Sailfish will probably be for the Meizu MX4, as there'll be an Ubuntu ROM for it, and libhybris is used by Ubuntu Phone ...
Also, hopefully future iterations of the HADK will smooth out some of the problems porters are facing.

mudnightoil said:
Don't think I'll regret getting the Z3C, from a hardware perspective
Click to expand...
Click to collapse
it's the same for me...
The SoC in your z3c and 1+1 is actually the same as in z1c, I guess – 8974 vs 8974ac – only higher clocked.
You should not suppose that mediatek SoCs will be easier in general just because of is one working device. Jolla runs a Snapdragon and it works perfectly, most of the devices sailfish is currently ported to run snapdragons – with very different results.

iuno said:
it's the same for me...
The SoC in your z3c and 1+1 is actually the same as in z1c, I guess – 8974 vs 8974ac – only higher clocked.
You should not suppose that mediatek SoCs will be easier in general just because of is one working device. Jolla runs a Snapdragon and it works perfectly, most of the devices sailfish is currently ported to run snapdragons – with very different results.
Click to expand...
Click to collapse
I wasn't saying Mediatek in general will be easier (though it's possible), but any device with an official Ubuntu ROM certainly will (should) be - Meizu MX4 (Mediatek) is the first of those.
P.S. The Z3C is fantastic ... though unfortunately in black as opposed to the red I ordered (it's being swapped tomorrow).

Thank you very much for these instructions. i have one question though. In order to download CM 10.1.3, it says to click that link which takes you to download CM installer app. Ive used that app before and as far as I kmow, it doesnt let you choose which version of CM you want to install, instead it just sets you up to install the newest CM 11. I downloaded 10.1.3 from their site. Either way, no big deal.
Also, which kernel do I download to install? Aosp or CM?
Thank you

Still up to date
Hi,
are these steps still up to date or should we follow a different set up guide to install the latest sailfish OS on the Nexus 4? Because most, if not all, the links on the first page end up 404...

Bluetooth sync from Jolla to Nexus 4
Flashed my Nexus 4 with the factory 4.2.2 from google with radio .48 and then flashed cm-10.1-20131003-SNAPSHOT-TREATFORCOOPER-mako-signed.zip because that seemed to be the 10.1.3 mentioned in the guides to end up flashing the latest sfos from this guide http://forum.xda-developers.com/nexus-4/development/rom-sailfish-os-community-port-t2969823.
I didn't try calling, it has 3G network working and wifi is working but I can't seem to get the contacts from my Jolla phone using the Bluetooth sync from the settings.
Anybody has some advice on this?

Just had a good look at the wiki of devices on the mer website and found out the bluetooth is not yet working on the Nexus 4...

Works perfectly on my oneplus one

Best ROM for Redmi 4 Prime as of right now

Hey guys,
I am currently running a beta of MIUI EU (it was one of the first original ROMs) however I want something new and stable. If I flash the stable MIUI EU I need to flash it from scratch and delete data, so I might as well see whats out there.
What is the most stable ROM for us currently?
My requirements in a ROM are the below;
- Fingerprint Sensor
- Encryption
- No bloatware
- Stable
- Receives OTA updates
- Good battery management (MIUI actually does a pretty good job of this AFAIK)
I am currently looking into EPIC and Resurrection however I want the one that will be receiving updates going forward etc.
Please let me know your thoughts of what you guys are using and why etc.

VulcanX said:
Hey guys,
I am currently running a beta of MIUI EU (it was one of the first original ROMs) however I want something new and stable. If I flash the stable MIUI EU I need to flash it from scratch and delete data, so I might as well see whats out there.
What is the most stable ROM for us currently?
My requirements in a ROM are the below;
- Fingerprint Sensor
- Encryption
- No bloatware
- Stable
- Receives OTA updates
- Good battery management (MIUI actually does a pretty good job of this AFAIK)
I am currently looking into EPIC and Resurrection however I want the one that will be receiving updates going forward etc.
Please let me know your thoughts of what you guys are using and why etc.
Click to expand...
Click to collapse
Try FlymeOS, but as some bloatware... There's no Custom ROM with OTA. Only MIUI and FlymeOS

VulcanX said:
Hey guys,
I am currently running a beta of MIUI EU (it was one of the first original ROMs) however I want something new and stable. If I flash the stable MIUI EU I need to flash it from scratch and delete data, so I might as well see whats out there.
What is the most stable ROM for us currently?
My requirements in a ROM are the below;
- Fingerprint Sensor
- Encryption
- No bloatware
- Stable
- Receives OTA updates
- Good battery management (MIUI actually does a pretty good job of this AFAIK)
I am currently looking into EPIC and Resurrection however I want the one that will be receiving updates going forward etc.
Please let me know your thoughts of what you guys are using and why etc.
Click to expand...
Click to collapse
Mokee (By Razziel)
Lineage 13(By Jacoghi)
Flyme(By Liberation)

VulcanX said:
Hey guys,
I am currently running a beta of MIUI EU (it was one of the first original ROMs) however I want something new and stable. If I flash the stable MIUI EU I need to flash it from scratch and delete data, so I might as well see whats out there.
What is the most stable ROM for us currently?
My requirements in a ROM are the below;
- Fingerprint Sensor
- Encryption
- No bloatware
- Stable
- Receives OTA updates
- Good battery management (MIUI actually does a pretty good job of this AFAIK)
I am currently looking into EPIC and Resurrection however I want the one that will be receiving updates going forward etc.
Please let me know your thoughts of what you guys are using and why etc.
Click to expand...
Click to collapse
Currently the only custom rom that usable is mokee 6 by razziell, but no OTA. Else use xiaomi.eu like your current choice.
All nougat custom rom currently suffer from either fingerprint, gps and camera bug due to lack proper driver from xiaomi. MIUI 9 based on nougat will fix those problems.

dels07 said:
Currently the only custom rom that usable is mokee 6 by razziell, but no OTA. Else use xiaomi.eu like your current choice.
All nougat custom rom currently suffer from either fingerprint, gps and camera bug due to lack proper driver from xiaomi. MIUI 9 based on nougat will fix those problems.
Click to expand...
Click to collapse
When you say "the only custom rom that (is) usable", are you taking into account the latest unofficial lineage os 13 by Jacoghi? I'm referring to lineage-13.0-20170506-UNOFFICIAL-markw that isn't available on Xda, but only on Bruno Coghi's YouTube channel.
It has everything working and covers all the items on that checklist, except for OTA updates.
It's my daily driver and it works great.

mnbpt said:
lineage-13.0-20170506-UNOFFICIAL-markw
Click to expand...
Click to collapse
I guess it is already unusable on the sole ground that is hasn't June security patches.
Does 20170506 mean 2017-June-5 or 2017-May-6?

adefigo said:
I guess it is already unusable on the sole ground that is hasn't June security patches.
Does 20170506 mean 2017-June-5 or 2017-May-6?
Click to expand...
Click to collapse
If you go by that criteria, then probably 99% of all Android devices are unusable...
What you probably mean is that it is not the best case scenario. But there's a huge difference between not the best and unusable. And having just the May security updates, although not absolutely great, is still pretty good.
Sure I'd love if the dev kept releasing updates, but i think my device is pretty safe for the time being.

go for Epic, you wont disappointed

mnbpt said:
probably 99% of all Android devices are unusable...
Click to expand...
Click to collapse
:good: yes!

Thanks for all the replies. I am really torn between them now. The Miui EU stable offers a lot, but it's still bloated like anything and will prob run very heavy like the current one I'm running.
If I opt for something else no OTA and some features will be broken.
Hmmm

VulcanX said:
Thanks for all the replies. I am really torn between them now. The Miui EU stable offers a lot, but it's still bloated like anything and will prob run very heavy like the current one I'm running.
If I opt for something else no OTA and some features will be broken.
Hmmm
Click to expand...
Click to collapse
WTF? does it even make sense the thing you're saying? "If I opt for something else no OTA and some features will be broken"?! Just try something yourself, watch reviews of the ROMs that exist for our device and choose yourself the one that you think that attracts you the most

mnbpt said:
When you say "the only custom rom that (is) usable", are you taking into account the latest unofficial lineage os 13 by Jacoghi? I'm referring to lineage-13.0-20170506-UNOFFICIAL-markw that isn't available on Xda, but only on Bruno Coghi's YouTube channel.
It has everything working and covers all the items on that checklist, except for OTA updates.
It's my daily driver and it works great.
Click to expand...
Click to collapse
High accuracy gps still drain battery faster than on Razziell mokee rom. Also Razziell rom more updated since jacoghi shift development to nougat.

psykkuno said:
WTF? does it even make sense the thing you're saying? "If I opt for something else no OTA and some features will be broken"?! Just try something yourself, watch reviews of the ROMs that exist for our device and choose yourself the one that you think that attracts you the most
Click to expand...
Click to collapse
Yeah so what Im saying, is it worthwhile using something that maybe I sacrifice the OTA but the rest is absolutely amazing, or stick with something a bit heavier but it has the OTA ie. MIUI EU Stable.
I use my phone for work so I cant really be messing around with something that isnt pretty stable and reliable you know.

VulcanX said:
Yeah so what Im saying, is it worthwhile using something that maybe I sacrifice the OTA but the rest is absolutely amazing, or stick with something a bit heavier but it has the OTA ie. MIUI EU Stable.
I use my phone for work so I cant really be messing around with something that isnt pretty stable and reliable you know.
Click to expand...
Click to collapse
Personally I have never ever used OTA, and can't really understand the requirement of a ROM to have it.
There are a lot of stable ROMs out there. Mokee, Lineage OS 13, and I'm currently using AOKP with no issues.
If you want something more like stock try Epic ROM.
Else just use MIUI EU Stable.

I tried a few roms. Epic seems steady for work n battery.
Think it's about half the weight of global about 900 mb approx.
I get nearly 4 days if phone was in ideal.
17.5 hrs sot strong WiFi, screen 20% no sim..
Sent from my Redmi 4 using XDA-Developers Legacy app
---------- Post added at 08:49 PM ---------- Previous post was at 08:49 PM ----------
Idel#
Sent from my Redmi 4 using XDA-Developers Legacy app

DISASTER .....i installed
1. PACK_TWRP_MrRaines-Thematized_Anik_Khan's_Recovery_And_Unlock_Bootloader_Tools ==== OK
2. epic_kenzo_global_V8.5.3.0_6.0.1_aroma ====== after is ask me to reboot ........ BLACK SCREEN ....... and NO system , NO fastboot , NO recovery mode , NO battery charge , NO Miflash with original ROM , NOTHING to DO at a ENDLESS BLACK SCREEN
3. solution ?????!!!! i will try to leave it all night to charge (even if epic OS was installed at 60 % of battery) ....maybe in the morning something miraculously happend ...... otherwise i'm afraid that it will be declared as a bricked REDMI 4 Prime.
i am opened to any other solution .....please

dllungu said:
DISASTER .....i installed
1. PACK_TWRP_MrRaines-Thematized_Anik_Khan's_Recovery_And_Unlock_Bootloader_Tools ==== OK
2. epic_kenzo_global_V8.5.3.0_6.0.1_aroma ====== after is ask me to reboot ........ BLACK SCREEN ....... and NO system , NO fastboot , NO recovery mode , NO battery charge , NO Miflash with original ROM , NOTHING to DO at a ENDLESS BLACK SCREEN
3. solution ?????!!!! i will try to leave it all night to charge (even if epic OS was installed at 60 % of battery) ....maybe in the morning something miraculously happend ...... otherwise i'm afraid that it will be declared as a bricked REDMI 4 Prime.
i am opened to any other solution .....please
Click to expand...
Click to collapse
I think you flashed the wrong Rom,Kenzo is redmi Note 3 or something like that but not r4p

dllungu said:
DISASTER .....i installed
1. PACK_TWRP_MrRaines-Thematized_Anik_Khan's_Recovery_And_Unlock_Bootloader_Tools ==== OK
2. epic_kenzo_global_V8.5.3.0_6.0.1_aroma ====== after is ask me to reboot ........ BLACK SCREEN ....... and NO system , NO fastboot , NO recovery mode , NO battery charge , NO Miflash with original ROM , NOTHING to DO at a ENDLESS BLACK SCREEN
3. solution ?????!!!! i will try to leave it all night to charge (even if epic OS was installed at 60 % of battery) ....maybe in the morning something miraculously happend ...... otherwise i'm afraid that it will be declared as a bricked REDMI 4 Prime.
i am opened to any other solution .....please
Click to expand...
Click to collapse
Wrong ROM:
Kenzo=Redmi note 3 pro
Markw=Redmi 4 Pro

N1ck474 said:
Wrong ROM:
Kenzo=Redmi note 3 pro
Markw=Redmi 4 Pro
Click to expand...
Click to collapse
thank you for your answer
a saw answers into forums that kenzo rom it has been recomanded to be installed on Redmi 4 Pro also , that way i give it a try (even if i have already CM 14.1 ready for it) .... it is late anyway ... so now i search solutions to restore any functional rom on it .... but this black screen it gives me realy headache .....( As if you were working with your eyes closed )

dllungu said:
thank you for your answer
a saw answers into forums that kenzo rom it has been recomanded to be installed on Redmi 4 Pro also , that way i give it a try (even if i have already CM 14.1 ready for it) .... it is late anyway ... so now i search solutions to restore any functional rom on it .... but this black screen it gives me realy headache .....( As if you were working with your eyes closed )
Click to expand...
Click to collapse
Are you able to use fastboot? If not then you bricked your device, either deep flash cable or test point could bring back your device. Never trust someone to flash rom to your device before you do research on the rom, kenzo and markw is different device and have different SOC.
It only make sense if you try to flash mido (Redmi Note 4) rom since they have same SOC, but don't try this. Only flash rom that are build for markw.

[ROM PORT REQUEST] MIUI 9 for Mi5 based on Android 8.0 Oreo by Xiaomi.eu to Z2 Plus

Hi Devs,
It's a humble request to all Experienced (Recognized) Developers/Young Developers/Members of XDA to PORT MIUI 9 ROM based on Android 8.0 Oreo for Mi5 by Xiaomi.eu to our beloved Z2 Plus device...
I know MIUI 9 by YouLinw exists for our device, but that PORT is purely based on Chinese build of MIUI 9 for Mi 5 based on Android 7.1.2 Nougat and is very limited to global users. No international user understands Chinese very well and they prefer the language in their preferred locale and Xiaomi.eu project enables the same and provides multi-language Official ROMs (PORT) by Xiaomi. Plus it is backed up by built-in Google Apps, so there's no need to perform any Gapps installations after flashing the ROM itself and is TWRP friendly ROM...
User/Dev Narshi Shukla has done exceptionally well in maintaining the MIUI 9 thread and providing help/support for that particular ROM PORT by YouLinw and changing/modifying many aspects of the PORTED ROM itself to make the ROM more usable to Global end users but still it lacks these three points, First is Android Oreo build and Second Gapps and Thirdly the addition of International languages/locale.
Considering the above benefits of having Globalized version of MIUI 9 for our Z2 Plus, that too on 8.0 Oreo build and with GApps included is something that many users are looking for...
I was trying to PORT this ROM my self but I'm facing technical problems with my PC hardware, as such my motherboard has got damaged and was sent for repairs to Service Centre and is with them since last few weeks and till now, no report on repairs done by them/working condition/service completion of hardware by the concerned SC... So I would request other Devs to Kindly step forward, if possible, please...
Your efforts are always appreciated and welcome guys...
Information
Code:
Latest Version is 8.3.8
Code:
[URL="https://xiaomi.eu/community/threads/8-3-8.43553/"]On Xiaomi.eu Official Forum Page[/URL]
Download Links
Code:
[URL="https://sourceforge.net/projects/xiaomi-eu-multilang-miui-roms/files/xiaomi.eu/MIUI-WEEKLY-RELEASES/8.3.8/"]https://sourceforge.net/projects/xiaomi-eu-multilang-miui-roms/files/xiaomi.eu/MIUI-WEEKLY-RELEASES/8.3.8/[/URL]
or
[URL="https://androidfilehost.com/?w=files&flid=254973"]https://androidfilehost.com/?w=files&flid=254973[/URL]
Note: There exists 02 (Two) different variants of MIUI 9 for MI5: Oreo is what we are looking for presently
Code:
xiaomi.eu_multi_MI5_8.3.8_v9-8.0.zip
and
xiaomi.eu_multi_MI5_8.3.8_v9-7.0.zip

Well, atleast let the ROM go stable for Mi5, as it is released just few days ago in beta. After proper release, porting maybe an option.

BishalSC said:
Well, atleast let the ROM go stable for Mi5, as it is released just few days ago in beta. After proper release, porting maybe an option.
Click to expand...
Click to collapse
Agreed but the ROM is already out of Internal Alpha Testing to Private Beta Testing to Public Beta/Developer/Weekly ROM now... We can wait... There's no issue in waiting for this ROM to get PORT though...

Heart_Robber786 said:
Agreed but the ROM is already out of Internal Alpha Testing to Private Beta Testing to Public Beta/Developer/Weekly ROM now... We can wait... There's no issue in waiting for this ROM to get PORT though...
Click to expand...
Click to collapse
Some users reported heat and just 3 4 hours sot, force closes here and there and there are many Oreo features are missing,
Let it progress and lets see how stable it will be after 2 3 updates,
Porting Xiaomi eu roms among other are in my list, but time management is a problem for me so it may take time.
Hope to see more devs/users trying to port MIUI based on global Branch.

narshi shukla said:
Some users reported heat and just 3 4 hours sot, force closes here and there and there are many Oreo features are missing,
Let it progress and lets see how stable it will be after 2 3 updates,
Porting Xiaomi eu roms among other are in my list, but time management is a problem for me so it may take time.
Hope to see more devs/users trying to port MIUI based on global Branch.
Click to expand...
Click to collapse
That's what I said but I think MIUI 10 will be properly compatible with Oreo as MIUI is always little late implementing all the features from AOSP like the amount of time taken them to apply notification reply.

Pixel Experience Port (Need Sources Code)

Hello Guys after a lot of search i decided to port a pixel Experience Android Pie Rom for Nokia 5
But first I Need Nokia 5 Sources Code
CAN ANYONE PROVIDE THE SOURCES CODE.

HMD Global still not release it for Nokia 5. But what I know, is that the Moto G3 has the same specs as Nokia 5. Can we use it to replace the Nokia 5 source code?

Be ready coz i started port miui 10 theme
And i am 100% sure that i can make bug free rom
Rom will be ready for flashing before 5 Jan.

Jitender Baloda said:
Be ready coz i started port miui 10 theme
And i am 100% sure that i can make bug free rom
Rom will be ready for flashing before 5 Jan.
Click to expand...
Click to collapse
Sorry! But can I know how to do that? I really want to learn about porting and building rom. But I don't know how to begin.

After port miui 10 rom for nokia 5. I will guide you how to port.

Thank you! It will be better if you make a video, or we chat together

Is Pixel Experience even worth on such a phone? I think we're more in need of LineageOS, no? ;s

So you are porting two roms?

Jitender Baloda said:
After port miui 10 rom for nokia 5. I will guide you how to port.
Click to expand...
Click to collapse
stop giving us a fake hope like HMD did. it's already 8th january 2019.

Bro I'm port rom as well as testing the rom myself and cheking every bug. Thats why i take more time
But trust me i m try to provide this rom fully stable.

Can we use Nokia 6's source code and roms since it has the same hw like Nokia 5?

I'm porting the rom not build rom .as i know in porting rom case not required kernal sources

Waiting for this custom rom

Why HMD Global not release Nokia 5 source code? Of we can use Nokia 6 source code for Nokia 5?

If you have updated to android pie on your Nokia 5 ,
Since Nokia phone have stock Android experience ,
You just need to install the pixel 3 launcher port ,
XDA link :- https://www-xda--developers-com.cdn...launcher-google-assistant-search-bar-pixel-3/ , I don't know if this work on Oreo , it works great on my Nokia 5

Miscellaneous1 said:
If you have updated to android pie on your Nokia 5 ,
Since Nokia phone have stock Android experience ,
You just need to install the pixel 3 launcher port ,
XDA link :- https://www-xda--developers-com.cdn...launcher-google-assistant-search-bar-pixel-3/ , I don't know if this work on Oreo , it works great on my Nokia 5
Click to expand...
Click to collapse
The only bad thing is that when you go into the overview you can't see the apps at the bottom which is annoying and the stock launcher cannot be disabled so it runs in the background and uses up memory