Instruction: Hello everyone. I decided to create a guide for about that subject, I'll explain for LG-K430TR LTE cause I've it. It's MTK chipset but I suppose this method should work at all. I hope you'll be succeeded. Warn me if I did anything wrong. Be/feel free to ask anything.
To develop together...
What you'll need:
LG Bridge (Install as normal app)
Device as normally :l
Windows Using PC (I'm not sure if it works under Windows 7)
*Device drivers.
*Device drivers= Find right drivers for your phone. Download it from official LG website. How?
Go on to official LG website and find your device right there.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Click on device support button.
Scroll down a little bit and click on "Firmware update" and then choose "USB driver for Windows", download it and install as normall app.
Be sure the device isn't connected with PC.
Steps to recover
Boot your device into download mode by; shut down your device and connect it to pc while hold pressing on volume up button. Do what I did in this video.
After that, open LG Bridge and click on like this picture.
Just wait on this screen.
Read the text carefully and check the checkbox
Wait...
And it got started to download! Wait until it get downloaded.
Download is done! Updating...
Uncompressing the compressed files.
After this step, it'll start to flashing files, also you can see this on your phone.
You've done. You succesfully recovered your device. :highfive: To not be bricked again.
TY for the help dude!!! for windows xp you must reinstall windows media player 11 and after that the mtp device will be installed, i did your explanations with lg bridge and it fixed my setup wizard stuck, ty a lot!
will this
would this process work if im getting a boot verification fail on the K10?
AngryUserLG said:
would this process work if im getting a boot verification fail on the K10?
Click to expand...
Click to collapse
Should work cause it flashes whole partitions, as you can see the which partitions in attachment.
And be sure you're doing all the steps for your device model.
berkantkz said:
Should work cause it flashes whole partitions, as you can see the which partitions in attachment.
And be sure you're doing all the steps for your device model.
Click to expand...
Click to collapse
yeah but i can't find the K10 on the website let alone mines D:
AngryUserLG said:
yeah but i can't find the K10 on the website let alone mines D:
Click to expand...
Click to collapse
Hahah what's your model?
berkantkz said:
Hahah what's your model?
Click to expand...
Click to collapse
LG K428
Used King Root last night on my wife's K10, everything worked... gained root access no problem. Woke up this morning to a boot-loop. Found your thread and figured I would update error recovery but I can't get LG Bridge to connect. I've already installed the drivers and rebooted both the device and the PC (windows 10). The device is in download mode and the PC recognizes the connection, but LG Bridge will not connect. Any thoughts?
LG Bridge
Cannot get K10 to connect to LG Bridge. All drivers were downloaded, the computer signals that it sees a device connected, LG Bridge will start to connect when I plug in the USB cable. They I fails to recognize the device each time.
the death of me said:
Used King Root last night on my wife's K10, everything worked... gained root access no problem. Woke up this morning to a boot-loop. Found your thread and figured I would update error recovery but I can't get LG Bridge to connect. I've already installed the drivers and rebooted both the device and the PC (windows 10). The device is in download mode and the PC recognizes the connection, but LG Bridge will not connect. Any thoughts?
Click to expand...
Click to collapse
the death of me said:
Cannot get K10 to connect to LG Bridge. All drivers were downloaded, the computer signals that it sees a device connected, LG Bridge will start to connect when I plug in the USB cable. They I fails to recognize the device each time.
Click to expand...
Click to collapse
Can you paste a screen shot from devices screen when it's connected to PC in download mode? (Win+X and then select "Device Manager")
Not sure how I would take a screen shot while in download mode. I do not see my device in device manager.
---------- Post added at 05:54 PM ---------- Previous post was at 05:52 PM ----------
I've tried Fastboot and LG Flash Tool as well to try any clear cache or factory reset. I think the issue is USB debugging may not be enabled. Would that keep LG Bridge from working?
the death of me said:
Not sure how I would take a screen shot while in download mode. I do not see my device in device manager.
---------- Post added at 05:54 PM ---------- Previous post was at 05:52 PM ----------
I've tried Fastboot and LG Flash Tool as well to try any clear cache or factory reset. I think the issue is USB debugging may not be enabled. Would that keep LG Bridge from working?
Click to expand...
Click to collapse
You got me wrong. I mean, I want a screenshot from your computer's screen. In download mode, it doesn't matter has debugging been enabled or disabled.
berkantkz said:
You got me wrong. I mean, I want a screenshot from your computer's screen. In download mode, it doesn't matter has debugging been enabled or disabled.
Click to expand...
Click to collapse
A screen shot of LG Bridge when my device is in download mode?
---------- Post added at 07:22 PM ---------- Previous post was at 07:18 PM ----------
the death of me said:
A screen shot of LG Bridge when my device is in download mode?
Click to expand...
Click to collapse
the death of me said:
A screen shot of LG Bridge when my device is in download mode?
---------- Post added at 07:22 PM ---------- Previous post was at 07:18 PM ----------
Click to expand...
Click to collapse
Not that. A screen of "Device manager".
https://www.youtube.com/watch?v=slv0oALx-s0
berkantkz said:
Not that. A screen of "Device manager".
https://www.youtube.com/watch?v=slv0oALx-s0
Click to expand...
Click to collapse
the death of me said:
Click to expand...
Click to collapse
Does adb or fastboot see your device?
berkantkz said:
Does adb or fastboot see your device?
Click to expand...
Click to collapse
I'm able to access the device with Fastboot. LG Bridge tries to connect when I plug in the USB cable but is unable to. I tried on 2 seperate PC's. One with Windows 7 and one with Windows 10, same result.
the death of me said:
I'm able to access the device with Fastboot. LG Bridge tries to connect when I plug in the USB cable but is unable to. I tried on 2 seperate PC's. One with Windows 7 and one with Windows 10, same result.
Click to expand...
Click to collapse
This reply can help you but I'm not sure how can you boot into fastboot by buttons.
Pretty sure it was volume down when USB was plugged in. Honestly I was surprised when the Fastboot screen appeared on the device. Then I figured I could try wiping data and cashe with Fastboot but it would not allow me to.
the death of me said:
Pretty sure it was volume down when USB was plugged in. Honestly I was surprised when the Fastboot screen appeared on the device. Then I figured I could try wiping data and cashe with Fastboot but it would not allow me to.
Click to expand...
Click to collapse
What does it say when you type fastboot devices?
Related
My nexus has been rooted. I up rom 4.3 by nexus 7 toolkit failed. When it change to fastboot mode, recovery failed, start failed so i choose power off. Now it won't boot just black screen forever (. Somebody help me please !
minhpro9xhp said:
My nexus has been rooted. I up rom 4.3 by nexus 7 toolkit failed. When it change to fastboot mode, recovery failed, start failed so i choose power off. Now it won't boot just black screen forever (. Somebody help me please !
Click to expand...
Click to collapse
Just manually try flashing recovery through fastboot .
Code:
fastboot flash recovery recovery.IMG
There are tons of similar threads like this . please try to search before posting.
Red Devil said:
Just manually try flashing recovery through fastboot .
Code:
fastboot flash recovery recovery.IMG
There are tons of similar threads like this . please try to search before posting.
Click to expand...
Click to collapse
Thank for your help but i tried and it just show "waiting for devices". My nexus still not display
minhpro9xhp said:
Thank for your help but i tried and it just show "waiting for devices". My nexus still not display
Click to expand...
Click to collapse
Oh did you install the drivers that are required on Windows from Asus ? Make sure you install them.
Code:
fastboot devices
will let you know if your device is connected well.
Red Devil said:
Oh did you install the drivers that are required on Windows from Asus ? Make sure you install them.
Code:
fastboot devices
will let you know if your device is connected well.
Click to expand...
Click to collapse
yes, i insalled driver from asus and i tried to press POWER ON and VOLUME DOWN so it change to APX mode. So, i update driver, pick driver from my computer>C:user/minh/download/usb_driver and nexus 7 still on APX mode with "ASUS Transformer prime APX interface" driver.
fastboot devices--->nothing
adb devices-->nothing
hi same thing happened to me
can you post the link of where to get the asus drivers from
any luck with your nexus yet??
Driver from Asus? Pretty sure you just use the one from the Android SDK.
GldRush98 said:
Driver from Asus? Pretty sure you just use the one from the Android SDK.
Click to expand...
Click to collapse
thanks for that
and do you have any idea on how to get the nexus back up and running
or anyone else
Can you get in to fastboot? If so, you can flash a recovery or system imaged or anything from there. Fastboot should always work (volume up + volume down + power all at the same time)
GldRush98 said:
Can you get in to fastboot? If so, you can flash a recovery or system imaged or anything from there. Fastboot should always work (volume up + volume down + power all at the same time)
Click to expand...
Click to collapse
yes i was, when in fastboot mode i choosed start and recovery mode but all failed so i choosed power off (very stupid thing). Now my device is brick.
minhpro9xhp said:
yes i was, when in fastboot mode i choosed start and recovery mode but all failed so i choosed power off (very stupid thing). Now my device is brick.
Click to expand...
Click to collapse
Tried plugging it in to the a/c adapter and charging for a few hours?
minhpro9xhp said:
fastboot devices--->nothing
adb devices-->nothing
Click to expand...
Click to collapse
^ This sounds like a driver issue if you are not getting anything to show up. You could try the zip I have attached its the google drivers I use and they work fine.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
View attachment google-usb_driver.zip
GldRush98 said:
Tried plugging it in to the a/c adapter and charging for a few hours?
Click to expand...
Click to collapse
i tried
dpdurst said:
^ This sounds like a driver issue if you are not getting anything to show up. You could try the zip I have attached its the google drivers I use and they work fine.
Click to expand...
Click to collapse
i don't thing the driver issue, i tried many driver but it not working.
google nexus 7 ADB interface
google nexus ADB interface
google nexus 7 BootLoader interface
google nexus bootloader interface
asus fastboot interface
...
thanks for replying
i tried many times to do various combinations o fholding down the power and up,down volume...nothing
i will try later when i am on my desktop to look at fastboot...and update the drivers
right now when i plug the nexus into the pc it comes up as not recognised...
if the nexus were completely dead would it still even come up in the device manager??
i also tried to pull the battery for a few minutes and then try again....nothing
i charge it into the mains with cable and nothing...
i will need to check it when i get home on my main pc in a few hours
please wirte any further siggestions or any web video/links which may help in this situation
THIS is the point where i turned the power off in the FIRST SCREEN
http://loewald.com/blog/?p=5198
i am on my main pc right now
i have downloaded the SDK manager and installed the Android SDK platform tools and Google USB driver
nothing happens when i plug the nexus into the PC
do i need to actually manually install these drivers or they are already installed when i ran the SDK manager...
the nexus shows as unknown device right now
Try to install WugFresh's toolkit. http://www.wugfresh.com/
Follow the driver installation guide and make sure thet the previous drivers is removed.
Choose the recomended driver.
If you can start your device in fastboot mode (bootloader) it should be salvageable.
If you use Windows 8, getting a working driver can be quite a struggle.
it was wugfresh toolkit that i was using
so i uninstalled all drivers and installed the drivers from his toolkit
sadly the usb device is still not recognised
well, i searched google and they said there was one way to fix hard brick nexus 7. It is using "JIG usb". If somebody used "JIG usb" please reply me.
I think I'm having the same problem as you, but I am still able to get into bootloader mode. It may take up to around 20 seconds holding the volume down and power button to get back into bootloader mode. In fastboot bootloader, going into recovery freezes (freezes on the "Teamwin" screen), "start" freezes on the "Google" screen with padlock unlocked. Used Wug's to try to go back to factory setting (but to 4.3 instead of 4.2.2), failed to write 'bootloader' and device never boots back up when it says "waiting for device". Then tried using Nexus 7 toolkit (not Wug's) to lock it back up and now I can't unlock again...same thing..."waiting for device" and device never boots back up.
any update for this problem?
any update for this problem?
i try alot of solution but nothing change
i saw N7 can connect to APX with correct Driver however we can do anything
i try connect power about 8 h but nothing change
what the F *K with OTA update ........
hi all
i got a LG G2 d801 that i flash on it a 802 stock rom and now its stuck on the LG logo
and when i try to get into its stuck on the download mode with the 3 blue circles and not switch to the update software screen
all thow it do enter to the update software screen and i flash the d802 stock rom and after the time i flashed the lollipop stock rom it didnt enter anymore
what i do manage to get in the update with the sideload
i really dont know what else to do
i really thank you all
I'll be grateful to those who will solve my problem
tvruikuzui123 said:
hi all
i got a LG G2 d801 that i flash on it a 802 stock rom and now its stuck on the LG logo
and when i try to get into its stuck on the download mode with the 3 blue circles and not switch to the update software screen
all thow it do enter to the update software screen and i flash the d802 stock rom and after the time i flashed the lollipop stock rom it didnt enter anymore
what i do manage to get in the update with the sideload
i really dont know what else to do
i really thank you all
I'll be grateful to those who will solve my problem
Click to expand...
Click to collapse
Do you know how to use the Snipping Tool in Windows?
If you do,connect your g2 to the pc,go to Device Manager,expand all connections,and take a ss with the Snipping tool.
Sent from my LG-D802 using XDA Forums Pro.
The Marionette said:
Do you know how to use the Snipping Tool in Windows?
If you do,connect your g2 to the pc,go to Device Manager,expand all connections,and take a ss with the Snipping tool.
Sent from my LG-D802 using XDA Forums Pro.
Click to expand...
Click to collapse
Snip when its stuck on the lg logo?
tvruikuzui123 said:
Snip when its stuck on the lg logo?
Click to expand...
Click to collapse
Snipping Tools is an application in Windows. It lets you make a screenshot of your screen in WINDOWS.
It is just like the screenshot taken on Android,but this Windows app makes a screenshot of your Windows Desktop/apps.
You can also Google the term "Windows Snipping Tool"
And you can also look for a video of a person using it,if you still do not know how to use it.
Sent from my LG-D802 using XDA Forums Pro.
The Marionette said:
Snipping Tools is an application in Windows. It lets you make a screenshot of your screen in WINDOWS.
It is just like the screenshot taken on Android,but this Windows app makes a screenshot of your Windows Desktop/apps.
You can also Google the term "Windows Snipping Tool"
And you can also look for a video of a person using it,if you still do not know how to use it.
Sent from my LG-D802 using XDA Forums Pro.
Click to expand...
Click to collapse
this is all i pics of the problem
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
tvruikuzui123 said:
this is all i pics of the problem
]
Click to expand...
Click to collapse
I need the shot of the device manager when you connect your phone NORMALLY,not in download mode!!!!
The Marionette said:
I need the shot of the device manager when you connect your phone NORMALLY,not in download mode!!!!
Click to expand...
Click to collapse
this is shot when i connect it normaly
its not getting out of the "lg" logo
i gave the shot of the download mode its not getting to the "Software Update" screen its stuck on the 3 blue circles
where is some way to recover the phone with the "apply update from adb" fanction
tvruikuzui123 said:
this is shot when i connect it normaly
its not getting out of the "lg" logo
i gave the shot of the download mode its not getting to the "Software Update" screen its stuck on the 3 blue circles
where is some way to recover the phone with the "apply update from adb" fanction
Click to expand...
Click to collapse
POWER OFF THE PHONE BY HOLDING THE POWER BUTTON FOR 30 seconds
CONNECT THE POWERED-OFF PHONE TO THE PC
THERE WILL BE THE LG LOGO,AND THAT IS WHAT YOU NEED
THEN TAKE AN SS OF THE DEVICE MANAGER
DO NOT CONNECT IN DOWNLOAD MODE
The Marionette said:
You seriously have trouble understanding English...
POWER OFF THE PHONE BY HOLDING THE POWER BUTTON FOR 30 seconds
CONNECT THE POWERED-OFF PHONE TO THE PC
THERE WILL BE THE LG LOGO,AND THAT IS WHAT YOU NEED
THEN TAKE AN SS OF THE DEVICE MANAGER
DO NOT CONNECT IN DOWNLOAD MODE
Click to expand...
Click to collapse
this tha you want
tvruikuzui123 said:
this tha you want
Click to expand...
Click to collapse
Which OS are you running? Because my Device Manager doesn`t look like yours(here is the ss of mine)
Can you connect the powered-off g2 to a PC which has Windows 7/8?
Also,download the USB Drivers for the G2:http://androidxda.com/download-lg-usb-drivers
look for the G2 ones in the list and install them on a Windows PC
EDIT
Okay,that is Windows that you are using...
Also,download ADB Fastboot drivers.
The Marionette said:
Which OS are you running? Because my Device Manager doesn`t look like yours(here is the ss of mine)
Can you connect the powered-off g2 to a PC which has Windows 7/8?
Also,download the USB Drivers for the G2:http://androidxda.com/download-lg-usb-drivers
look for the G2 ones in the list and install them on a Windows PC
EDIT
Okay,that is Windows that you are using...
Also,download ADB Fastboot drivers.
Click to expand...
Click to collapse
im using windows 7 its on hebrow
now there is somethig strange i install your usb drivers and every 1 or 2 minuits the computer try to install drivers
tvruikuzui123 said:
im using windows 7 its on hebrow
now there is somethig strange i install your usb drivers and every 1 or 2 minuits the computer try to install drivers
Click to expand...
Click to collapse
is the phone connected?
If it is,that isnt bad.
The thing is,while that lg logo stands and the phone is conncted to the PC,its connecting all the partitions(there are more than 10 of the partitions),so let your pc install those drivers and do not disconnect your phone from the pc!
EDIT
Also,if you can,on a pc you never connected your g2 to,install the LG usb drivers and the adb fastboot drivers.
And then connect the g2(but first let the current pc you are using install the drivers.
EDIT#1
I will be away for 2 hours,but I can give you the link to this thread:
http://forum.xda-developers.com/showthread.php?t=2432476&page=1030
I suggest you post your problem there.
The OP is extremely,and definitely more capable than me.
The Marionette said:
is the phone connected?
If it is,that isnt bad.
The thing is,while that lg logo stands and the phone is conncted to the PC,its connecting all the partitions(there are more than 10 of the partitions),so let your pc install those drivers and do not disconnect your phone from the pc!
EDIT
Also,if you can,on a pc you never connected your g2 to,install the LG usb drivers and the adb fastboot drivers.
And then connect the g2(but first let the current pc you are using install the drivers.
Click to expand...
Click to collapse
so i just need to connect the phone and let my PC install the drivers?
then what?
tvruikuzui123 said:
so i just need to connect the phone and let my PC install the drivers?
then what?
Click to expand...
Click to collapse
Yes,leave it to install the drivers.
Then you should see something like QHUSB BULK in the "Device Manager",and there should be many drives visible in "My Computer".
Just tried on my device H850 and other two EU Variant with success and no problem.
Prerequisites :
1. have just installed right G5 Drivers here
2. make a backup using LG Bridge (optional)
3. download and install right LGUP version here (if you have installed another one remove it before)
4. download and install H850 DLL file here
5. Download right KDZ for your variant. In this case we will use H85010c provided by @autoprime here
Here we go.
Installation guide:
1. Power Off device
2. By pressing Vol Up button connect device to your pc and wait Download Mode screen it appears on device
3. Start LGUP , check Bin file and select your KDZ
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
4. Select REFURBISH in "Process" panel
5. Close LGUP and open it again
6. click to START to begin Stock Clean Reflash
7. wait that in "Step" panel you have "Complete" status and don't disconnect device from pc until % is = 100%
Finish
Credit :
@autoprime for KDZ
@asialove2013 for LGUP and DLL right version installers
oh wow, that is just amazing. I was holding off rooting my device till there is a way to get back to stock and now it seems we have a way.
Does the warning triangle/message disappears after stock flash ?
_ray_ said:
oh wow, that is just amazing. I was holding off rooting my device till there is a way to get back to stock and now it seems we have a way.
Does the warning triangle/message disappears after stock flash ?
Click to expand...
Click to collapse
Always there
wolfgart said:
Always there
Click to expand...
Click to collapse
Bummer, i dont understand even after flashing stock why would it still show warning ?
_ray_ said:
Bummer, i dont understand even after flashing stock why would it still show warning ?
Click to expand...
Click to collapse
Because if you unlock bootloader, you can' t relock it
wolfgart said:
Because if you unlock bootloader, you can' t relock it
Click to expand...
Click to collapse
ahh i see now. thanks
I've installed LG Up version you linked in windows 10, but process tab doesn't appear, so I cannot check refurbish or upgrade.
failax said:
I've installed LG Up version you linked in windows 10, but process tab doesn't appear, so I cannot check refurbish or upgrade.
Click to expand...
Click to collapse
Make screenshot
wolfgart said:
Make screenshot
Click to expand...
Click to collapse
failax said:
Click to expand...
Click to collapse
problem is your pc
You have opened sw in multiple widows ...
wolfgart said:
problem is your pc
You have opened sw in multiple widows ...
Click to expand...
Click to collapse
I rebooted the pc but I have the same problem.With Lg up for Lg g4 i hadn't this problem, can I use that version?
failax said:
I rebooted the pc but I have the same problem.With Lg up for Lg g4 i hadn't this problem, can I use that version?
Click to expand...
Click to collapse
Problem is not LGUP version but your Windows.
You should clear you registry from all traces of previous LGUP versions, reboot, and reinstall him
wolfgart said:
Problem is not LGUP version but your Windows.
You should clear you registry from all traces of previous LGUP versions, reboot, and reinstall him
Click to expand...
Click to collapse
I clicked on first line where is recognized my device, and process tab has appeared...sorry.
Trying this on my H850, but LG UP shows it as model Unknown and won't let me Select it to continue. It says "You have to select a known model, please."
QuantifyThis said:
Trying this on my H850, but LG UP shows it as model Unknown and won't let me Select it to continue. It says "You have to select a known model, please."
Click to expand...
Click to collapse
be sure tu have installed G5 Drivers and reinstall DLL. Reboot pc and retry
wolfgart said:
be sure tu have installed G5 Drivers and reinstall DLL. Reboot pc and retry
Click to expand...
Click to collapse
Ahh that was it, forgot the DLL.
In LG UP I chose the Upgrade option instead of Refurbish to see what would happen (hoping not to lose all my data and have to restore). Seems to have worked ok, went from 10a to 10c now. Everything working ok so far.
good news: this seems to have fixed the aux/headphone jack static problem in my car. Don't have to use a ground loop isolator any more.
same. it is PC issue
failax said:
Click to expand...
Click to collapse
---------- Post added at 04:26 AM ---------- Previous post was at 04:24 AM ----------
wolfgart said:
be sure tu have installed G5 Drivers and reinstall DLL. Reboot pc and retry
Click to expand...
Click to collapse
Looks like that many guys do not read the guide
I managed to flash the KDZ file. But now, I'm not able to root it again.
fastboot boot twrp does not work (unknown command)
fastboot flash recovery twrp claims to be run successfully, but still the stock recovery is installed. Whcih means: everytime I try to get into recovery mode a full wipe is done. this is really annoying.
According to "fastboot getvar unlocked", the device is still unlocked and, due to this, the unlock image cannot be flashed again.
Do you know what I'm doing wrong here?
Edit: Done. The fifth time it worked. Nevermind. Thank you!
Download link from LGUP not work.
Edit: I geht this error see picture.
Hi, download link for LGUP doesn't work...can you fix it please
Does anyone have a link for twrp to work on andriod nougat? My Device is running the beta version on Andriod N on the mate 8 but i need to take it back a firmware because nothing is working.
Didn't you get the memo?
You were tasked with the responsibility of creating one.
Now PLEASE get to it were all waiting on YOU !
ps Have a nice day.
kdkinc said:
Didn't you get the memo?
You were tasked with the responsibility of creating one.
Now PLEASE get to it were all waiting on YOU !
ps Have a nice day.
Click to expand...
Click to collapse
so there isnt then??
I wish there was.. I'm stuck with my mate 8 and can't do anything but turn it on and off
Need TWRP for Emui 5 too ( can a twrp for the pixel work maybe... at least it'll be for nougat if not for emui .. i just need to copy the /dload folder to my mate 8.. can't do via adb cause i can't turn on usb debugging so no /adb push
Swissguy36 said:
I wish there was.. I'm stuck with my mate 8 and can't do anything but turn it on and off
Need TWRP for Emui 5 too ( can a twrp for the pixel work maybe... at least it'll be for nougat if not for emui .. i just need to copy the /dload folder to my mate 8.. can't do via adb cause i can't turn on usb debugging so no /adb push
Click to expand...
Click to collapse
Fastboot?
gm007 said:
Fastboot?
Click to expand...
Click to collapse
how do i push the dload folder via fastboot?
adb devices gives me no device
Swissguy36 said:
how do i push the dload folder via fastboot?
adb devices gives me no device
Click to expand...
Click to collapse
You need to install the drivers for fastboot,check the device manager the see what is recognized when u connect in fastboot mode.
And check this tool for unbrick maybe it can help you http://forum.xda-developers.com/mate-8/development/rayglobe-italian-knife-t3295526
gm007 said:
You need to install the drivers for fastboot,check the device manager the see what is recognized when u connect in fastboot mode.
Click to expand...
Click to collapse
hold on.. i'll try....
Edit:
pc doesn't recognise my mate 8 at all.. as I said usb debugging can't be turned on...
Rayglobe's Italian Knife doesn't do anything but "updating" please wait since over 5 minutes
Mate 8 is recognised in device manager as Android Bootloader Device.. but /adb devices gives no result
Swissguy36 said:
hold on.. i'll try....
Edit:
pc doesn't recognise my mate 8 at all.. as I said usb debugging can't be turned on...
Rayglobe's Italian Knife doesn't do anything but "updating" please wait since over 5 minutes
plus i downloaded adb drivers for mate 8 , double click install drivers.exe but nothing happens
Click to expand...
Click to collapse
Maybe something wrong with ur pc,it should detect ur phone in device manager.
Knife tool take lot of time to load so wait.
gm007 said:
Maybe something wrong with ur pc,it should detect ur phone in device manager.
Knife tool take lot of time to load so wait.
Click to expand...
Click to collapse
It detects my device in device manager but not in adb devices, henche i cannot copy anything to my phone
Knife tool is "updating" since 25 minutes
Edit:
wget was the problem, once I closed the process, italian knife is working..... reporting back after trying some things
This is. The wrong driver install manual,the name of the driver ..... sooner....
letschky said:
This is. The wrong driver install manual,the name of the driver ..... sooner....
Click to expand...
Click to collapse
OK i'm back with emui 5.0 and the same problem that i can't skip fingerprint setup cause it doesn't let me add a PIN via voice input I'll retry to unbrick with emui 4.0 via italian knife..
---------- Post added at 09:47 AM ---------- Previous post was at 09:35 AM ----------
Now I have following problem..
on EMUI5:
First boot:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Stuck...
If i choose continue without fingerprint setup this happens:
Back to the beginning.
Using the italian knife to unbrick, using the boot.img cust.img recovery.img and system.img from L29B152 update.app this is the error:
So I guess I will have to wait for Twrp Emui 5 to be released, right?
Try unbrick and put nougat firmware files.
Boot to stock recovery and do factory reset.
What happen when you skip the fingerprint setup?
I can enter the wifi password since it's only numbers..
then i get to the google login.. which is letters.. and the voice input doesn't get anything right... : ( i need a goddamn keyboard somehow flashable over adb
Flash nougat latest recovery and you are good to go back to old formware via dload
bluheart said:
Flash nougat latest recovery and you are good to go back to old formware via dload
Click to expand...
Click to collapse
after I factory reset my phone is FPS locked and I can't use fastboot at all... great
---------- Post added at 12:14 PM ---------- Previous post was at 11:15 AM ----------
OMG i regret installing this beta first time ever i regret.... now i'm stuck at google account input.. with my voice.. i have it all done but NOT the @ sign.. saying at sign doesn't work... how can I input a @ ? someone please help
Swissguy36 said:
after I factory reset my phone is FPS locked and I can't use fastboot at all... great
---------- Post added at 12:14 PM ---------- Previous post was at 11:15 AM ----------
OMG i regret installing this beta first time ever i regret.... now i'm stuck at google account input.. with my voice.. i have it all done but NOT the @ sign.. saying at sign doesn't work... how can I input a @ ? someone please help
Click to expand...
Click to collapse
Unlock boot
Let frp remain that way, then dload your region latest firmware. Dont regret fire up
bluheart said:
Unlock boot
Let frp remain that way, then dload your region latest firmware. Dont regret fire up
Click to expand...
Click to collapse
God above helped me find a micro usb - usb adapter and I could fix it all with my pysical keyboard thanks for everyone that was helping now i just need to flash the update.
Good boy
Swissguy36 said:
OK i'm back with emui 5.0 and the same problem that i can't skip fingerprint setup cause it doesn't let me add a PIN via voice input I'll retry to unbrick with emui 4.0 via italian knife..
Click to expand...
Click to collapse
Brother, How did you manage to install Nougat. I am also stuck bootloop. I can only access fastboot and eRecovery. Kindly post here what you did to resolve your issue.
Hello,
i have flashed the wrong bootloader and now i my bootloader is oem_locked, and i have no OS.
I cannot flash anything. how to hard brick my phone to qhsusb_bulk mode so i can flash another bootloader to fix my problem?
Can i open and short my phone somehow to be able to get into the Qualcomm Download mode?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
EDIT: mistake second post.
www(dot)droidsavvy(dot)com/unbrick-qualcomm-mobiles/
forums(dot)oneplus(dot)net/threads/fix-qhsusb_bulk-brick-on-the-opo.408420/
Check out these two pages, see if they can help you.
(I can't post outside links yet)
nlpl931 said:
www(dot)droidsavvy(dot)com/unbrick-qualcomm-mobiles/
forums(dot)oneplus(dot)net/threads/fix-qhsusb_bulk-brick-on-the-opo.408420/
Check out these two pages, see if they can help you.
(I can't post outside links yet)
Click to expand...
Click to collapse
That is the problem i don't know how to enter the QHSUSB_BULK mode on my phone because i can only accesss fastboot
Have you tried erasing about, modem, persist... partitions, and then flashing the appropriate images?
nlpl931 said:
Have you tried erasing about, modem, persist... partitions, and then flashing the appropriate images?
Click to expand...
Click to collapse
i cannot im affraid. Bootloader is locked, and i cannot unlock it.
When i try to unlock it says that i need to enable oem unlock but i have no android installed..
Actually it's not qhsusb_bulk mode that you need, you need QDloader mode which can be accessed through the qhsusb_bulk mode. If you run Windows,
#1. CMD(admin)
#2. bcdedit.exe -set load options
DDISABLE_INTEGRITY_CHECKS
bcdedit.exe -TESTSIGNING ON
#3. Reboot your computer keeping​ your phone connected to the computer
#4. On booting go to device manager
#5. You should see a new device entry with QHSUSB_BULK under Qualcomm devices(or any other Qualcomm entry)
#6. This is the QHSUSB_BULK mode that you can use to get into QDloader mode using appropriate drivers, as in the links I posted.
I'll look for more info, if I can help you?
---------- Post added at 12:11 AM ---------- Previous post was at 12:09 AM ----------
codGmer said:
i cannot im affraid. Bootloader is locked, and i cannot unlock it.
When i try to unlock it says that i need to enable oem unlock but i have no android installed..
Click to expand...
Click to collapse
Try going through the process of unlocking bootloader....and I have a feeling that it will work, since you don't need to boot your phone for unlocking the bootloader. You can find guides for that....
nlpl931 said:
Actually it's not qhsusb_bulk mode that you need, you need QDloader mode which can be accessed through the qhsusb_bulk mode. If you run Windows,
#1. CMD(admin)
#2. bcdedit.exe -set load options
DDISABLE_INTEGRITY_CHECKS
bcdedit.exe -TESTSIGNING ON
#3. Reboot your computer keeping​ your phone connected to the computer
#4. On booting go to device manager
#5. You should see a new device entry with QHSUSB_BULK under Qualcomm devices(or any other Qualcomm entry)
#6. This is the QHSUSB_BULK mode that you can use to get into QDloader mode using appropriate drivers, as in the links I posted.
I'll look for more info, if I can help you?
---------- Post added at 12:11 AM ---------- Previous post was at 12:09 AM ----------
Try going through the process of unlocking bootloader....and I have a feeling that it will work, since you don't need to boot your phone for unlocking the bootloader. You can find guides for that....
Click to expand...
Click to collapse
ill try the steps. But the unlocking is not going to work because the first step is use
Code:
fastboot oem get_unlock_data
returns this:
so i cannot unlock my phone by the official way.
Then I guess you will need to jump through all those hoops...
nlpl931 said:
Then I guess you will need to jump through all those hoops...
Click to expand...
Click to collapse
What hoops? Those steps?
#5. You should see a new device entry with QHSUSB_BULK under Qualcomm devices(or any other Qualcomm entry)
Click to expand...
Click to collapse
none of those show up, because i can only boot into fastboot not the black screen with flashing light.
Did you manage to fix it?
Did you manage to get your phone fixed? Mine is doing the same thing you said, I can not flash anything, and the "qualcomm unbrick" guides do not work for me, I dont see any Qualcom Loader in my Devices Manager, but I do see an Android Device when I plug it to my pc.
I can only get to fastboot mode, can not flash anything, my bootloader is locked, and it trhows the same error (read datablock error) when I try to unlock it.
Thanks in advance
same situation
jalbarran said:
Did you manage to get your phone fixed? Mine is doing the same thing you said, I can not flash anything, and the "qualcomm unbrick" guides do not work for me, I dont see any Qualcom Loader in my Devices Manager, but I do see an Android Device when I plug it to my pc.
I can only get to fastboot mode, can not flash anything, my bootloader is locked, and it trhows the same error (read datablock error) when I try to unlock it.
Thanks in advance
Click to expand...
Click to collapse
Could you solve the problem friend? I am also in that situation, greetings
Try to choose QCOM mode in a bootloader
I too had the same problem and solved it.
You can't reboot into bootloader so can't flash stock firmware. I had the same problem and was able to solve it using few tutorials.
Here is a youtube video to solve this problem: https://www.youtube.com/watch?v=m2NqpY6X-X4
Watch the entire video. He had a proper running device and then purposely bricked his device to bring into the same state as your device.
Then he solved it.
Here is the xda thread that was used to create the above video: https://forum.xda-developers.com/moto-g4-plus/help/solved-unbrick-hard-bricked-dead-t3585016
The above video was made using this xda thread and I am not the owner of the video or the thread.
I would suggest watch the video and follow it as its more continent.
Note: there was a step in the above mentioned thread which was to be done. I did it and faced problem (the computer then didn't even recognize the device as qhsusb_bulk and showed "usb device not recognized"). Had to reset my pc and then skipped that step. That step is also skipped in he youtube video.
These are the two lines which I skipped writing in cmd and it worked:
bcdedit -set loadoptions DISABLE_INTEGRITY_CHECKS
bcdedit -set TESTSIGNING ON
---------- Post added at 08:34 AM ---------- Previous post was at 08:28 AM ----------
jalbarran said:
Did you manage to get your phone fixed? Mine is doing the same thing you said, I can not flash anything, and the "qualcomm unbrick" guides do not work for me, I dont see any Qualcom Loader in my Devices Manager, but I do see an Android Device when I plug it to my pc.
I can only get to fastboot mode, can not flash anything, my bootloader is locked, and it trhows the same error (read datablock error) when I try to unlock it.
Thanks in advance
Click to expand...
Click to collapse
Did you try unlocking the bootloader? If you are able to do that then you will be able to flash. I don't know why device is unable to flash stock firmware with locked bootloader
david_7 said:
Could you solve the problem friend? I am also in that situation, greetings
Click to expand...
Click to collapse
I had to buy another phone! I just couldn't fix it in any way.
I even took it to a guy who works fixing phones, and he said it had the motherboard bricked! And there's no solution for that, other than buying another board (expensive!!)