Database Users

Problem with Custom Roms with Samsung S5

Hello Every One
I Have A Problem With my Phone Samsung Galaxy S5 (SM-G900F) I was Having a resurrection remix Rom on my phone then i have booted an Official Marshmallow Rom Then it have been slow so i have flashed Rom resurrection remix Again and here is the Problem when i flashed it it flash normally when it goes to the resurrection remix Logo it doesn't open and stay showing the logo
i have restarted several times and it doesn't open so I Have tried to flash cyanogenmod Rom then it goes on the logo of the cyanogenmod Rom then the Phone Restart .
Please Help .
SOS !!

statiicz said:
Hello Every One
I Have A Problem With my Phone Samsung Galaxy S5 (SM-G900F) I was Having a resurrection remix Rom on my phone then i have booted an Official Marshmallow Rom Then it have been slow so i have flashed Rom resurrection remix Again and here is the Problem when i flashed it it flash normally when it goes to the resurrection remix Logo it doesn't open and stay showing the logo
i have restarted several times and it doesn't open so I Have tried to flash cyanogenmod Rom then it goes on the logo of the cyanogenmod Rom then the Phone Restart .
Please Help .
SOS !!
Click to expand...
Click to collapse
I am having EXACTLY the same problem here!!! It happened after I flashed stock BTU (UK unbranded) and then trying to revert back to BlissPop/CM13. Maybe the new stock boot/modem is not supported by custom ROM makers yet?
Could anyone confirm/solve this? Thanks a lot!

statiicz said:
Hello Every One
I Have A Problem With my Phone Samsung Galaxy S5 (SM-G900F) I was Having a resurrection remix Rom on my phone then i have booted an Official Marshmallow Rom Then it have been slow so i have flashed Rom resurrection remix Again and here is the Problem when i flashed it it flash normally when it goes to the resurrection remix Logo it doesn't open and stay showing the logo
i have restarted several times and it doesn't open so I Have tried to flash cyanogenmod Rom then it goes on the logo of the cyanogenmod Rom then the Phone Restart .
Please Help .
SOS !!
Click to expand...
Click to collapse
Just verifing. When flashing a new rom, you are clearing the old one out first, right?
Like wiping the cache, system, boot,ect.

Shadow Assassin said:
Just verifing. When flashing a new rom, you are clearing the old one out first, right?
Like wiping the cache, system, boot,ect.
Click to expand...
Click to collapse
(I'm #2) Did all the usual wipes. No problem with stock rom, but cannot boot after flashing any custom ROMs like CM13.

Shadow Assassin said:
Just verifing. When flashing a new rom, you are clearing the old one out first, right?
Like wiping the cache, system, boot,ect.
Click to expand...
Click to collapse
Yes I Wipe All The Data With TWRP Recovery And i Have tried with CWm Recovery And Philz touch recovery either
And the is no changes it stuck !!

spolarbear said:
(I'm #2) Did all the usual wipes. No problem with stock rom, but cannot boot after flashing any custom ROMs like CM13.
Click to expand...
Click to collapse
statiicz said:
Yes I Wipe All The Data With TWRP Recovery And i Have tried with CWm Recovery And Philz touch recovery either
And the is no changes it stuck !!
Click to expand...
Click to collapse
Sorry its taken me so long to reply back, had stuff going on. Anyways, after doing some studying and playing with my sisters G5. They seem to be very finicky with modifications, even after root and a custom recovery installed. One thing to try (because it happened on my skyrocket), is to reinstall your recoveries and do it with a computer, that how to get a stable install, if your already using a computer, then it sounds like a something from the old firmware may still be their. You may need to install the earliest stock firmware for your G5 out of the box, and root it from their, you may even need a complete stock restore then re-root and install your custom recovery. Also. I have had some roms take 20 minutes to boot, but thats the rom stabilising.
Sent from my LG-H900 using XDA-Developers mobile app

Yureka Soft brick.. Help me....!

I am Using Custom Roms From Last 5 Months. I ve installed cwm recovery in My yu yureka. Recently changed my Custom ROM To CR droid. It was Going smooth and neat. I Got bored of CR droid. Tried To change my ROM to miui Through cwm Got bootloop
Then I have restored my old CR droid ROM through cwm. And then I flashed Twrp 3.0 . and again I tried to flash miui ROM again got bootloop. And then again restored to CR droid which I have backed first. And then downloaded the Resuccurtion remix ROM and flashed through Twrp it booted up. And again I tried flashing miui Through Twrp. Phone started restarting again and again continuously and then went to my recovery tried restoring my old ROM phone booted up and I was using the same ROM. Next morning when I wake up phone rebooting again and again. Went to recovery , tried cleared system / factory reset Phone still rebooting. Made clean wipe flashed new ROM phone still rebooting
Don't know what to do. Then I flashed stock ROM using fastboot mode , flashed successfully phone booted up after completing setup wizard the phone started rebooting Help me to get rid out of this thanx :good:
Sorry for long explanation

I have same problem here after miui 8
waiting for solution
hope someone will solve

I have a similar case my device is in bootloop untill charger is connected.
I had similar(all most same) trouble you mentioned before and my bad luck i still dont have a solution :crying:

zuk z1 bootloop when flashing any rom

i flashed nuclear 7.1 but i encurred in a bootloop that i could resolve only with qfil tool, so i putted cos 12.1 stock, unclocked bootloader and flashed twrp, now: when i flash ANY rom via twrp i go in a bootloop that i can only solve with qfil tool going back to cos and do everything from beginning.
i tried:
change recovery (i tried CWM but i have same problem)
wipe storage (anything changed)
i tried several roms but everyone gave me the same result: very fast bootloop in zuk logo and phone vibration
the only thing i can do is to restore a backup, but since im note able to flash mm firmware (bootloop) i cant use touch id and g-sensor
what can be the problem?
any solution?
thanks

Boot and recovery partitions
Sounds like you messed up boot and recovery sections. Since you can boot up successfully, you may try to flash back to ZUI which changes these two sections completely. If it's not a solution for you, I think the only way to repair is completely format including kernel, system and partitions. You can find the tutorial on Website.

...
you can fix it just use TOOL_ZUK_Z1_ENG_0.0.6

Try flashing COS 12.1 via fastboot.

crazyox said:
i flashed nuclear 7.1 but i encurred in a bootloop that i could resolve only with qfil tool, so i putted cos 12.1 stock, unclocked bootloader and flashed twrp, now: when i flash ANY rom via twrp i go in a bootloop that i can only solve with qfil tool going back to cos and do everything from beginning.
i tried:
change recovery (i tried CWM but i have same problem)
wipe storage (anything changed)
i tried several roms but everyone gave me the same result: very fast bootloop in zuk logo and phone vibration
the only thing i can do is to restore a backup, but since im note able to flash mm firmware (bootloop) i cant use touch id and g-sensor
what can be the problem?
any solution?
thanks
Click to expand...
Click to collapse
Hi!! I've flashed the NucleaRom too and for a couple of weeks it worked just fine. However one day, out of nowhere, the phone, while still on and working, restarted itself and entered a bootloop. After a few days it restarted normally and lasted a couple of hours but then it all started again. The BIG issue here is that when the phone enters in this bootloop where it remains on for about 15 seconds, it does it either in the system or the recovery/fastboot. I've managed to install two other ROMs via TWRP, when it miraculously remained turned on, but the problem persisted.
Is there a chance your problem was similar? How did you manage to flash via QFIL? I can't enter into that "emergency" or "download mode" in order to flash.
Many thanks in advance

i think that the problem is in the bootloader itself you should try flashing the latest os u have used and instal ordinary unofical lineage nightly (you can find everywhere) by this way your bootloader will be updated to 7.1 after that you can install any software i was having same problem when trying to migrate to lineage os

unable to install Custom ROM's
hi ,,
even i had the same problem like recovery was not accepting any ROMS... if we flash it ll go to recovery again and again,
and later i have flashed CM 13 with image file,, it worked and gone to recovery and updated the update to lineage OS 14.1 with Gapps..
hope it might help u...
crazyox said:
i flashed nuclear 7.1 but i encurred in a bootloop that i could resolve only with qfil tool, so i putted cos 12.1 stock, unclocked bootloader and flashed twrp, now: when i flash ANY rom via twrp i go in a bootloop that i can only solve with qfil tool going back to cos and do everything from beginning.
i tried:
change recovery (i tried CWM but i have same problem)
wipe storage (anything changed)
i tried several roms but everyone gave me the same result: very fast bootloop in zuk logo and phone vibration
the only thing i can do is to restore a backup, but since im note able to flash mm firmware (bootloop) i cant use touch id and g-sensor
what can be the problem?
any solution?
thanks
Click to expand...
Click to collapse

crazyox said:
i flashed nuclear 7.1 but i encurred in a bootloop that i could resolve only with qfil tool, so i putted cos 12.1 stock, unclocked bootloader and flashed twrp, now: when i flash ANY rom via twrp i go in a bootloop that i can only solve with qfil tool going back to cos and do everything from beginning.
i tried:
change recovery (i tried CWM but i have same problem)
wipe storage (anything changed)
i tried several roms but everyone gave me the same result: very fast bootloop in zuk logo and phone vibration
the only thing i can do is to restore a backup, but since im note able to flash mm firmware (bootloop) i cant use touch id and g-sensor
what can be the problem?
any solution?
thanks
Click to expand...
Click to collapse
i am continuously on the boot loop! how to get rid of it?
plz help its been 4 hrs, i think i am in trouble! any possible solutions!!!!

U can try one thing.... Install cm13 with flash file and then restart - - & go to recovery select install update and select lineage 14 and G apps... I did like this . And it worked....

Mi A1 Problem With Stock Rom

As The Lineage OS 15.1 is on the Xda forum and I saw it and downloaded and flashed the rom without any problem and after i was done with testing the rom i wanted to go back on stock rom and after flashing stock oreo 7.12.29 the phone boot into the setup and after setting fingerprint it keeps on restarting I tried to reflash the stock rom but it did the same afterwards i though of flashing lineageos again I tried to root it and did the same procedure as before but the phone this time did not booted into the lineage os rom and just stuck on the boot....
also when the phone boots into the setup it did not detect my simcards What to do ????
Help Me Guys Please.....:crying:

Hello
reflash last stock rom this is gonna help

Yes I tried doing that but now my phone boots with no IMEI what to do help please ,?

Please help me with this bootloop problem

hi guys. i have been using evolution x rom for past 1.5 years. since the launch of miui 12, i was excited to try it out. so i flashed miui12 gsi port 20.5.28 (european rom) in my tissot. this is where the problem begun. although the rom worked fine with some bugs, im satisfied with my use for 2 weeks and now i've to come back to evolution x.
BUT I CAN'T. the problem is when i wiped everything except internal storage and flashed the latest evolution x rom and reboot, the device stuck in a bootloop. i tried again and the result is same. so i flashed the miui 12 port again and it worked fine. then i come to know only miui is working. so i flashed stockrom via fastboot method and it worked. i get relieved and i again unlocked boot loader by " fastboot oem unlock " and flashed the evolution x rom again. i also tried pixel experience and the result is same
THE DEVICE STUCK IN THE BOOTLOOP AGAIN. i waited for 10 mins but the result is same. now i returned to miui 12 port.
SO THE SUMMARY OF MY PROBLEM IS THAT, I CAN ONLY USE STOCK AND MIUI 12 GSI PORT. IF I TRY TO FLASH CUSTOM ROM THE DEVICE STUCKS IN BOOTLOOP.

You tried twrp mount to system and problem solve go-to recovery twrp and mount system and flash ROM and flash twrp installer and Mount to system again

Barathwaj said:
hi guys. i have been using evolution x rom for past 1.5 years. since the launch of miui 12, i was excited to try it out. so i flashed miui12 gsi port 20.5.28 (european rom) in my tissot. this is where the problem begun. although the rom worked fine with some bugs, im satisfied with my use for 2 weeks and now i've to come back to evolution x.
BUT I CAN'T. the problem is when i wiped everything except internal storage and flashed the latest evolution x rom and reboot, the device stuck in a bootloop. i tried again and the result is same. so i flashed the miui 12 port again and it worked fine. then i come to know only miui is working. so i flashed stockrom via fastboot method and it worked. i get relieved and i again unlocked boot loader by " fastboot oem unlock " and flashed the evolution x rom again. i also tried pixel experience and the result is same
THE DEVICE STUCK IN THE BOOTLOOP AGAIN. i waited for 10 mins but the result is same. now i returned to miui 12 port.
SO THE SUMMARY OF MY PROBLEM IS THAT, I CAN ONLY USE STOCK AND MIUI 12 GSI PORT. IF I TRY TO FLASH CUSTOM ROM THE DEVICE STUCKS IN BOOTLOOP.
Click to expand...
Click to collapse
U trebelised ur device?

Harvey_Spectar said:
U trebelised ur device?
Click to expand...
Click to collapse
yes. still bootloop

Harvey_Spectar said:
U trebelised ur device?
Click to expand...
Click to collapse
i have trebelised and flashed the evo x rom. still the result is same. i formatted data, trebelised and have done everything i could do. i have waited 6 mins in bootloop and the loop continues. but the stock rom (fastboot flash) and miui 12 port works fine.

Barathwaj said:
i have trebelised and flashed the evo x rom. still the result is same. i formatted data, trebelised and have done everything i could do. i have waited 6 mins in bootloop and the loop continues. but the stock rom (fastboot flash) and miui 12 port works fine.
Click to expand...
Click to collapse
Untrebelise ur phone and then flash custom rom

this is the problem with miui gsi it happens to me some days ago i treble my phone and flashed the miui 12 gsi and i didn't like the rom so i decided to get back to PixelExperience Rom but when i flashed the rom and try to reboot from twrp it shows no os installed i reboot the phone and it stucks on splash screen then i tried some other roms but same problem then i flashed stock firmware and my phone boot after that i flash twrp and custom rom and everything works good.
i think its some kind of problem with gsi everytime u flash this gsi u have to flash stock firmware to get working custom rom

ranjodhricky said:
this is the problem with miui gsi it happens to me some days ago i treble my phone and flashed the miui 12 gsi and i didn't like the rom so i decided to get back to PixelExperience Rom but when i flashed the rom and try to reboot from twrp it shows no os installed i reboot the phone and it stucks on splash screen then i tried some other roms but same problem then i flashed stock firmware and my phone boot after that i flash twrp and custom rom and everything works good.
i think its some kind of problem with gsi everytime u flash this gsi u have to flash stock firmware to get working custom rom
Click to expand...
Click to collapse
Can u get back to custom??? Even now i can't. So I'm using stock now

Harvey_Spectar said:
Untrebelise ur phone and then flash custom rom
Click to expand...
Click to collapse
Barathwaj said:
Can u get back to custom??? Even now i can't. So I'm using stock now
Click to expand...
Click to collapse
I've untrebelised and can go to custom now. I thought it's a success. But nothing can access storage. Even camera app asks for sd card. Chrome stops working after sometime. Microsoft edge is not opening at all. So i went back to stock

Barathwaj said:
hi guys. i have been using evolution x rom for past 1.5 years. since the launch of miui 12, i was excited to try it out. so i flashed miui12 gsi port 20.5.28 (european rom) in my tissot. this is where the problem begun. although the rom worked fine with some bugs, im satisfied with my use for 2 weeks and now i've to come back to evolution x.
BUT I CAN'T. the problem is when i wiped everything except internal storage and flashed the latest evolution x rom and reboot, the device stuck in a bootloop. i tried again and the result is same. so i flashed the miui 12 port again and it worked fine. then i come to know only miui is working. so i flashed stockrom via fastboot method and it worked. i get relieved and i again unlocked boot loader by " fastboot oem unlock " and flashed the evolution x rom again. i also tried pixel experience and the result is same
THE DEVICE STUCK IN THE BOOTLOOP AGAIN. i waited for 10 mins but the result is same. now i returned to miui 12 port.
SO THE SUMMARY OF MY PROBLEM IS THAT, I CAN ONLY USE STOCK AND MIUI 12 GSI PORT. IF I TRY TO FLASH CUSTOM ROM THE DEVICE STUCKS IN BOOTLOOP.
Click to expand...
Click to collapse
is android verified boot enabled (avb) ?