Database Users

[TUTORIAL] Easy way for UNLOCK Bootloader and flash TWRP 2.8.6.0 for MX4

All your actions with the phone is at your own risk. The authors are not liable. This is just your choice.
PLEASE read full instructions before you start.
RECOMMENDED ONLY FOR EXPERIENCED USERS.
This was tested ONLY on MEIZU MX4 and ONLY FIRMWARE 4.2.8.2A, ANY OTHER FIRMWARE/PHONE - YOU WILL RECEIVE BRICK PHONE.
(с)
ONLY FOR MEIZU MX4 AND ONLY FIRMWARE 4.2.8.2A. Don't use the that apk on Lollipop or your device will brick​
Hello everyone, i changed chinese apk for unlock bootloader, and replaced chinese recovery, on TWRP 2 8.6.0 recovery.
1. Download Flyme OS 4.2.8.2A stock firmware an official webpage Meizu
2. Flash it in stock recovery and select WIPE DATA
3. Get root permission
4. Download and install that APK - drive.google.com/open?id=0B_Gd_o_kBWgLNHFuZW5kMlFzV2s
5. Open that app, and provide root permission.
6. Press "Press to UNLOCK BootLoader" - and wait, you will see "Unlock Finished"
7. After, will be available recovery mode, and you press to "Enter Recovery Mode"
8. Your phone reboot and enters for normal recovery - TWRP 2.8.6.0.

Thanks for the great work!
At last we're getting closer to opening up our meizu phones.
Can the phone with this, unlocked bootloader flash "I" international roms from OTA?

How to relock?

ideosx5 said:
How to relock?
Click to expand...
Click to collapse
Reflash FLyme rom (with Flyme recovery, be carefull!)
Or flash stock uboot

Successfully upgraded MX4 "A" edition phone to "I" using following method:
Installed 4.2.8 "A" stock firmware.
1. Installed apk method unlock (this thread).
2. Downloaded 4.5.7 "I" firmware, extracted and created system.img using (linux):
$ sdat2img system.transfer.list system.new.dat system.img
for windows, see this guide from Meizufans.
3. Boot into fastboot mode (now unlocked) using "VOL -" + "POWER"
4. fastboot flash boot boot.img
WAIT
fastboot flash system system.img
WAIT
5.Reboot into recovery
6. Full wipe
7. Install super su
8. Reboot
VOILA - 4.5.7 "I"
Remember to block/deactivate system updates once system has booted for first time.

Is it possible for someone to upload recovery.img of TWRP please ? I'd like to try
---------- Post added at 10:16 AM ---------- Previous post was at 09:22 AM ----------
I got it, I'm fixing the splash screen dimensions ahah^^
---------- Post added at 11:03 AM ---------- Previous post was at 10:16 AM ----------
It was a little harder than I expected but it's here : http://www.mediafire.com/download/26b963db1k489db/new-recovery.img

Learnincurve said:
Successfully upgraded MX4 "A" edition phone to "I" using following method:
Installed 4.2.8 "A" stock firmware.
Click to expand...
Click to collapse
Good, but there is easy way download that rom, and install it for TWRP(select full wipe, include internal storage) - emmaus.pro/MX4_custom_roms/Flyme/4.5.7i_twrp.zip
and there all stock Flyme roms for twrp - emmaus.pro/?dir=MX4_custom_roms/Flyme
Author all rom "nikk3d" russian 4pda users - 4pda.ru/forum/index.php?showuser=2196261

And this method works even on newest firmware, let's say 4.5.6i downgraded to 4.2.8i via 4.0.4i? Or is a easy variant of previous method, patched uboot by meizu remains after 4.5.6i upgrade if i understand, no matter if you downgrate to Kitkat?

update for TWRP : http://www.mediafire.com/download/f6a65ccpgrfaopw/TWRPr5.img
Changelog :
I corrected "Select storage" position, corrected some shifts on the main screen

zaurikk said:
Good, but there is easy way download that rom, and install it for TWRP(select full wipe, include internal storage) - emmaus.pro/MX4_custom_roms/Flyme/4.5.7i_twrp.zip
and there all stock Flyme roms for twrp - emmaus.pro/?dir=MX4_custom_roms/Flyme
Author all rom "nikk3d" russian 4pda users - 4pda.ru/forum/index.php?showuser=2196261
Click to expand...
Click to collapse
I have an MX4 originally with Ubuntu touch, I tried to flash 4.5.7i from emmaus.pro.
It failed, updater binary error. I checked the recovery log and it says write error, no space left.
Does anybody have any clue?
Thanks,
Note: I already tried a wipe out (even internal storage). No issues with the cyanogenmod roms from emmaus.pro.

Is someone trying to make fom Meizu MX5?
Sent from my MX5 using Tapatalk

itresw said:
I have an MX4 originally with Ubuntu touch, I tried to flash 4.5.7i from emmaus.pro.
It failed, updater binary error. I checked the recovery log and it says write error, no space left.
Does anybody have any clue?
Thanks,
Note: I already tried a wipe out (even internal storage). No issues with the cyanogenmod roms from emmaus.pro.
Click to expand...
Click to collapse
i think, mx4 ubuntu touch version, and standard china version, - internal partitions(storage) name - different, so you gives write an error.

isko01 said:
Is someone trying to make fom Meizu MX5?
Sent from my MX5 using Tapatalk
Click to expand...
Click to collapse
Now it is impossible.

zaurikk said:
Now it is impossible.
Click to expand...
Click to collapse
Thanks for reply . Can I know how much is good Caynogenmod on MX4? Is everything working good?
Sent from my MX5 using Tapatalk

isko01 said:
Thanks for reply . Can I know how much is good Caynogenmod on MX4? Is everything working good?
Sent from my MX5 using Tapatalk
Click to expand...
Click to collapse
Yep, all needed function now it work - gsm module, wi-fi, bluetooth and etc.
The only problem, that ROM not officially for Cyanogen team, that rom created by ordinary users and updated 1-2 times on month.

i tried on M2 note, i suppose it bricked.is it possible earlier condition working?i look up some unbrick videos, can repairs make my phone working?thanks.

No way to unbrick it, this is for MX4 not M2 Note !!! You'll need to change the motherboard, sorry

zaurikk said:
Yep, all needed function now it work - gsm module, wi-fi, bluetooth and etc.
The only problem, that ROM not officially for Cyanogen team, that rom created by ordinary users and updated 1-2 times on month.
Click to expand...
Click to collapse
Thanks to all user's who making this for MX4. They are really engineers! I hope they will try for MX5.
Yes, the problem it is not official, and we cant get new update.
Why we don't write a email to Canynogen and tell them that we open the bootloader and put CM. But we want they make CM for MX4 and MX5, with new CM and updates?
Sent from my MX5 using Tapatalk

my meizu is bricked, ne response please help me

hi someone had tested this app already? is it surely gonna work??
and after i will unlock the bootloader i can instal any rom? like Mokee and CM12.1??

Lost my OS!!

I was Trying to Flash Cyanogenmod 13 ROM on Zenfone 2 ZE551ML through a Video on youtube,According to the Video I Rooted my Device , Unlocked Boot-loader , Downloaded Cyanogenmod ROM , Downloaded Gaaps, Fastboot , TWRP Recovery and Every other thing required, as later on as per the video , I got to the TWRP Recovery Mode ,then according to the video, I took backup of my earlier rom(ZENUI ROM) ,and then Wiped the Data(Dalvik Cache , data ,etc) and then When I Tried to Flash That Cyanogenmod Rom- the Error Showed up(ERROR EXECUTING UPDATER BINARY IN ZIP) , But the device in Video Flashed the Rom Successfully, I Tried again to Flash that Rom But still Ended up with the Same Error , then I tried to Flash my Original ROM Backup , But this time too it showed Error, I thought that the Cyanogenmod rom i download was Corrupt , so i downloaded the another rom and tried to flash that but no use !! :crying:
Now what To Do, i Rebooted the Device, it Stucked on the ASUS Logo

AnyOne Please Help!!!
Jatinnm said:
I was Trying to Flash Cyanogenmod 13 ROM on Zenfone 2 ZE551ML through a Video on youtube,According to the Video I Rooted my Device , Unlocked Boot-loader , Downloaded Cyanogenmod ROM , Downloaded Gaaps, Fastboot , TWRP Recovery and Every other thing required, as later on as per the video , I got to the TWRP Recovery Mode ,then according to the video, I took backup of my earlier rom(ZENUI ROM) ,and then Wiped the Data(Dalvik Cache , data ,etc) and then When I Tried to Flash That Cyanogenmod Rom- the Error Showed up(ERROR EXECUTING UPDATER BINARY IN ZIP) , But the device in Video Flashed the Rom Successfully, I Tried again to Flash that Rom But still Ended up with the Same Error , then I tried to Flash my Original ROM Backup , But this time too it showed Error, I thought that the Cyanogenmod rom i download was Corrupt , so i downloaded the another rom and tried to flash that but no use !! :crying:
Now what To Do, i Rebooted the Device, it Stucked on the ASUS Logo
Click to expand...
Click to collapse
ANYONE Please Help!! :fingers-crossed:

Jatinnm said:
ANYONE Please Help!! :fingers-crossed:
Click to expand...
Click to collapse
if you have backup of your rom just go in twrp> restore and find your backup and restore, if that doesnt work then download original rom, download windroid toolkit, go to twrp>advanced and do adb sideload from windroid

ElmirBuljubasic said:
if you have backup of your rom just go in twrp> restore and find your backup and restore, if that doesnt work then download original rom, download windroid toolkit, go to twrp>advanced and do adb sideload from windroid
Click to expand...
Click to collapse
I think he downloaded a corrupted zip file. So, just download a correct zip, put it it sdcard and flash it. Relax, drink a coffee.

Forgot to mention
ElmirBuljubasic said:
if you have backup of your rom just go in twrp> restore and find your backup and restore, if that doesnt work then download original rom, download windroid toolkit, go to twrp>advanced and do adb sideload from windroid
Click to expand...
Click to collapse
Sorry I forgot to mention that TWRP recovery is also not working (opening) since i tried to flash another rom , it only gets to the bootloader mode where there areoptions for which mode i have to go for ( like recovery mode , bootloader mode , normal boot, etc), is there any other way to flash the original rom( i have downloaded original zenfone 2 ze5511ml firmware fron the asus website) , please anyone Help

Just flash stock recovery from bootloader and boot in it then go adb sideload
Inviato dal mio ASUS_Z00AD utilizzando Tapatalk

ElmirBuljubasic said:
Just flash stock recovery from bootloader and boot in it then go adb sideload
Inviato dal mio ASUS_Z00AD utilizzando Tapatalk
Click to expand...
Click to collapse
but how can i do it I don't know that much, is there any video tutorial on youtube for that ??

What was your build before flashing the rom? If .184 then download this >https://mega.nz/#!edpFlZIY!Zx0sEoMAGnqPSq760QXdzxgfLATO1Ku5IsuI9z7-A6E open windroid and go to second tab e Press flash recovery then chose the img file and flash (when you are in bootloader mode) then reboot in recovery
Inviato dal mio ASUS_Z00AD utilizzando Tapatalk
---------- Post added at 09:41 PM ---------- Previous post was at 09:40 PM ----------
Also i suggest you to NOT wipe the data from stock recovery, just do adb sideload and from same interface from windroid(second tab) Press adb sideload and then select the stock rom, it will take time ( for me it took like 30 minutes to finish!!) Dont unplug for any reason
Inviato dal mio ASUS_Z00AD utilizzando Tapatalk

[Tutorial] Meizu m2 note bootloader unlock guide

Finally we have a guide to unlock the bootloader of Meizu m2 note. We need Mediatek SP Flash Tool, MTK phone drivers and the images/bin files for unlocking. No modaco superboot, no fake tutorials any more
Now here's the guide:
1. Download the files I provide
Then unzip it. You'll get a folder with FlashTool, Phone drivers and unlock images.
2.Install drivers for Mediatek platform.
3.Flash the temp-unlock-secro.img via Flashtool.
4.Flash secro.img, lk.bin, preloader_meizu6753_65c_l1.bin via Flashtool.
5.Disconnect USB data cable and power on the phone. If you see the "=>Normal boot" sign(it's quite small.......) in the left bottom cornor of the screen, then the unlock is done. You can now flash things in whatever way you like. The guide is over~~~
The full tutorial is here:https://mega.nz/#!zJxmBDAA!VyYLgPoOfx1P4O7WzSvKVycnbWnYPESzazZGOoIt15w
The unlock tool is here:https://mega.nz/#!zA4zQT4B!c8W5IBPmmglAHwfzhqN3AOnYC2Rs1a_ToRLNBSLCXT8
Thank you for testing&trying!
Update: New link for the unlock tutorial and tools(Google Drive), since I lost my MEGA drive account's master key and I can no longer access to that account xDD
https://drive.google.com/file/d/1mVXr8b7i_H0dUd_ygdlQ882AERBuIczD/view?usp=sharing
https://drive.google.com/file/d/1v2bX8hRdtaVg-VP-VGqhzBpw0pAQeo1C/view?usp=sharing
2020/04/20 Update:IDK if there's still people using m2note, but it seems that GDrive has taken my files down, so here goes another link on OneDrive/Sharepoint, including unlock tools&guide&scatter file which can expand your system partition to 2G/2.5G(not made by me though),use with caution:
https://freeshadow-my.sharepoint.co...1Ci_6r_02ZZVMBDclrX_Zocv6FEdTzl_Co0w?e=mOX7RZ

Hey brother.we had already made 3 mouth hack in meizu m1 metal.But m1metal's system is powed by yunos.so we cannot get root until now.Nowadays,we can flash mx5 system.img by dd if so on flash command,but still unable to get root.I think its uboot's problem.I hope you can help us. 300billions m1 metal user need your help .thk you
Sent from my HTC M8d using XDA-Developers mobile app

aaawqw said:
Finally we have a guide to unlock the bootloader of Meizu m2 note. We need Mediatek SP Flash Tool, MTK phone drivers and the images/bin files for unlocking. No modaco superboot, no fake tutorials ant more
Now here's the guide:
1. Download the files I provide
Then unzip it. You'll get a folder with FlashTool, Phone drivers and unlock images.
2.Install drivers for Mediatek platform.
3.Flash the temp-unlock-secro.img via Flashtool.
4.Flash secro.img, lk.bin, preloader_meizu6753_65c_l1.bin via Flashtool.
5.Disconnect USB data cable and power on the phone. If you see the "=>Normal boot" sign(it's quite small.......) in the left bottom cornor of the screen, then the unlock is done. You can now flash things in whatever way you like. The guide is over~~~
I hope xda-developers can help work out a recovery image:fingers-crossed::fingers-crossed: If you can port the recovery and it works well, just leave a comment here I need that very much
PS: I tried to port a TWRP recovery from Elephone P8000 but the screen is upside down I tried to add ro.sf.hwrotation=180 in default.prop but it didn't work And I also tried to add setprop ro.sf.hwrotation 180 in init.rc. It didn't work as well:crying: Who can help fix this? Or I need to compile the TWRP myself?)
The full tutorial is here:https://mega.nz/#!zJxmBDAA!VyYLgPoOfx1P4O7WzSvKVycnbWnYPESzazZGOoIt15w
The unlock tool is here:https://mega.nz/#!zA4zQT4B!c8W5IBPmmglAHwfzhqN3AOnYC2Rs1a_ToRLNBSLCXT8
Thank you for testing&trying!
Click to expand...
Click to collapse
Some screenshots of unlock~~~
It shows it is still locked but we are able to flash recovery via fastboot or flashtool

[email protected] said:
Hey brother.we had already made 3 mouth hack in meizu m1 metal.But m1metal's system is powed by yunos.so we cannot get root until now.Nowadays,we can flash mx5 system.img by dd if so on flash command,but still unable to get root.I think its uboot's problem.I hope you can help us. 300billions m1 metal user need your help .thk you
Sent from my HTC M8d using XDA-Developers mobile app
Click to expand...
Click to collapse
M1 metal is powered by YunOS, and it have a system service called"AntiRoot". As we all know, the antiroot in YunOS is very powerful which is extremely hard to hack. Now you can only use Kingroot to get "Fake Root",which can't edit the system partition. I'm using m2 note(M571) so I can't help u about that, sorry

Oh, and remember this tutorial WON'T WORK on Meizu M571C (meizu m2 note China Telecom version ). We are still working on that but we don't have the phone to test our work.

meizu os version
using os version? when you open ur m2 note bootloader? Thank you

titoerlangga30 said:
using os version? when you open ur m2 note bootloader? Thank you
Click to expand...
Click to collapse
I have tested on Flyme 4.5.3A and Flyme 5.1.4.0A. It worked. And I'm going to write a easier toturial soon, by shell script.

titoerlangga30 said:
using os version? when you open ur m2 note bootloader? Thank you
Click to expand...
Click to collapse
Our bootloader has some problems, so it will always shows it is locked, but in fact it can be uocked by my method, and we are able to flash recovery partition. I ported one but it's buggy, so I won't release it until problem resolved. The screen is upside down but touch is ok. Th only way to fix it is to compile the full image, but my computer's performance is so poor.... Could u help me bro?

Sorry i cant help you.. my pc is not powerfull too and i dont have knowladge about it.. I wish someone can help u better.. and you can release custom rom or custom recovery for our Meizu m2 note.. peacee..

Hello, meanwhile thanks for excellent work, many were expecting this, this point is not clear 3.Flash the temp-unlock-secro.img via Flashtool. in which voice I load this? and also others from flash files,
do you think that will function on G firmware or is it better if he comes back to version A?
Excuse my English I am Italian, and use google translator

Giuppygrass said:
Hello, meanwhile thanks for excellent work, many were expecting this, this point is not clear 3.Flash the temp-unlock-secro.img via Flashtool. in which voice I load this? and also others from flash files,
do you think that will function on G firmware or is it better if he comes back to version A?
Excuse my English I am Italian, and use google translator
Click to expand...
Click to collapse
Please see the full guide I provided in the link
It has showed this.

Giuppygrass said:
Hello, meanwhile thanks for excellent work, many were expecting this, this point is not clear 3.Flash the temp-unlock-secro.img via Flashtool. in which voice I load this? and also others from flash files,
do you think that will function on G firmware or is it better if he comes back to version A?
Excuse my English I am Italian, and use google translator
Click to expand...
Click to collapse
I tested it on 4.5.3A and 5.1.4.0A.
This guide only change the ""secro" partition, "preloader" and "lk"(bootloader). It does not depend on your firmware version. So be relax and try it
Hope your Google translater works well

How about in the guide:
And change the Scatter to this file:
Now choose temp-unlock-secro.img and select it.
but it always fails because it is not a scatter but .img

Giuppygrass said:
How about in the guide:
And change the Scatter to this file:
Now choose temp-unlock-secro.img and select it.
but it always fails because it is not a scatter but .img
Click to expand...
Click to collapse
The scatter file is "MT6753_Android_scatter.txt", not the img maybe i insert a wrong picture there

what about mx4 pro (Exynos 5430 Octa) ?

hello we are new to and TWRP custom rom ??

I have build a TWRP recovery from the newest CM12.1 and TWRP source code.
Here's the link: https://mega.nz/#!ychBnTSb!wL6qicJ2KCpwnhHNImEhhk2OGuEKThxcDk2tj0iGuP0
Problems: Sometimes /cache partition can't be mounted. You can flash preloader, lk and secro partition again to solve this.
And the CPU Temperature clock doesn't work. It always shows 0 Degree...... I'll try to fix it.
Other functions works well Try it!
Before you flash it by Flash tool or fastboot or other tools, remember to remove /system/recovery-from-boot.p
That file will restore the flyme recovery at boot~

I would try but it is not clear how to use flash tool can make images of where to load the various files?
thank you

Giuppygrass said:
I would try but it is not clear how to use flash tool can make images of where to load the various files?
thank you
Click to expand...
Click to collapse
Run Flash Tool.
Load the scatter file first, then click the blank after "recovery", then load the recovery image. Click download then your phone will get TWRP recovery.
Remember to remove /system/recovery-from-boot.p first or your recovery will go back to flyme one

After installing the twrp have you tried to reflash a flyme rom ? Does it works or the official rom have some checks in the zip file to remove ?
Inviato dal mio m2 note utilizzando Tapatalk

[Update] Remove Vendor ROM, Install Latest EUI With Update Option Stock/TWRP Recovery

The final steps to Remove "Vendor ROM" that does not have the Update Option in Settings Or Unbrick Le Max 2 or simply Update Le Max 2 to latest EUI.
NOTE: This method should address the following weird problems:
1. Le Max 2 TWRP Seeing 0MB in Internal Storage. Unable to access the ROM Storage
2. Encrypt Option Greyed Out In Settings-->Fingerprint and Security
2. Update Option missing in Settings.
3. Fingerprint Sensor not working... If it still gives trouble... Calibrate the FP Sensor in its settings. Or register the same fingerprint multiple times.
This method should work on ALL versions of Le Max 2 including X820 X829 X821
Before starting... Remove ALL USB peripherals that might interfere with the process. Use USB Ports on the PC/Laptop... DO NOT use USB Hubs... Even if the phone appears dead... Connect it Power Outlet and let it charge for an hour.
1. Download the latest Stable EUI... from LeEco Website Directly .
2. Download the FlashOne v1.9 And Service ROM From HERE.
UPDATE: FlashOne v2.0 has been released! Here's the LINK.. It is a bit more advanced and offers the ability to format User Data for a Cleaner Flash
3. Download Qualcomm Drivers
4. Put Le Max 2 in EDL (Emergency Download Mode) by pressing Volume +, Volume - and Power Button Simultaneously. For those having difficulty..... Here are few tips.
Connect the Phone to PC. If the phone is Switched/Powered On... Then Power Off the phone and Switch Back On with the Key Combinations.
OR
If the Phone is Switched Off... Then Use the Key Combination to put the phone in EDL Mode..
In either case..... the PC will make a sound of Disconnection and Reconnection of an USB peripheral. AND you will see Qualcomm QDLoader 9008 Driver Installation. To verify the same... go to Device Manager in Win 7 / Win 10 and Under Ports (Com & LPT)... you should see Qualcomm HS-USB QDLoader 9008 (COMXX).. The XX corresponds to a particular COM Port. Remember this port.
5. Once the Le Max 2 is in Qualcomm QDLoader 9008 EDL Mode... Start the FlashOne Software.
6. Choose “Qualcomm – flash dead phone” from the drop down menu next to “Flash type”.
7. Click “Refresh button” next to “Select Device”. Here your Le Max 2 will show up but in COM Number (ComXX)
8. Browse for our Qfil/service ROM by clicking “Select File”.... You can technically select the Latest EUI ROM... But it is safer with Service ROM. DO NOT Unzip the ROM File.
9. After everything is set up under “Settings”, Press “Flash” button.
10. Installation can take anywhere between 10 to 20 minutes. Have Patience.
There are chances that the Flashing might fail. In case it does... Simply put the phone in EDL Mode again... and restart the procedure.
11. After the FlashOne confirms successful flash... Wait for 15 - 20 seconds. Then Power On the phone by pressing the Power Button for at least 60 seconds. Do Not Panic due to the long press.. Press it until the phone vibrates.
12. The Le Max 2 should be in Developer Version of EUI with an unlocked Bootloader and STOCK recovery.
13. The Developer ROM has the “Format Virtual SD card” setting in Settings Menu--> Backup/Reset--> Factory Reset.. Use the setting to get back the 50+GB
[You can also use the option Format Data in TWRP Recovery instead and the partition will 64GB correctly instead of 10 GB initially. Read ahead for the procedure]
14. Once you have a working Le Max 2... there are two directions:
Install Latest Stable EUI ROM... with Update Option
OR Install TWRP Recovery / ROOT / Custom ROM
15. a. For those who wish to install Stock ROM... Simply rename it to "update" (DO NOT Add .zip... Else the file will look like update.zip.zip) and place the update.zip file in ROOT of the phone. Thereafter Switch Off the Phone... Enter Recovery by pressing Volume + and Power Button... Choose Update System AND the other setting to Clear All Data. Your Le Max 2 should update without any error.
15. b. For those who want TWRP and ROOT:
* Download the latest TWRP (For Le Max 2) and SuperSU from their respective websites. Download and Install ADB and Fastboot From HERE.
* Copy the SuperSU Zip File to the ROOT of the Phone.
* Unzip and Rename the TWRP recovery to Recovery (The file should be Recovery.img.... NOT Recovery.img.img)
* Put the Le Max 2 into Fastboot Mode By Pressing Volume - and Power Button
* Go to the ADB Install Folder and Press Shift & Right Click to get & select “Open command window here“. Confirm Fastboot is working by Entering Command: Fastboot Devices.. You should see a random string of letters followed by the word Fastboot. If you do not see the same..... the installation didn't complete successfully.
* In the Command Window.. Type: fastboot flash recovery recovery.img
* Enter the following Command: fastboot boot recovery.img
* Once the Phone has entered the Recovery... Flash the SuperSU Zip file and you will have ROOT capabilities.
* Take FULL Backup of your device and then install ANY Custom ROM.
Do let me know your results.
[Update]: There's a simple method you could try to get the Update Option Back in Le Max 2 Phone that arrived with Vendor ROM... Using the default File Manager Tap on the Update.zip file and select Upgrade Option. This will force the phone to Update using the ROM file. This method is for people who could not update through the Stock Recovery and received Errors.

After QFil/flashone my lemax2 still bootloops. I've tried flashing other roms via recovery but it reboots mid installation.
Any advice?

Try Another QFil / Service ROM
Yisheng said:
After QFil/flashone my lemax2 still bootloops. I've tried flashing other roms via recovery but it reboots mid installation.
Any advice?
Click to expand...
Click to collapse
My advice is try another Qfil. These files are quite large and hence the one you downloaded might have some corruption.
Try THIS File

Hi, the link to the Leeco website is down...is there any alternative for downloading the latest stable EUI?
I downloaded the 23s from another website, renamed "update" but when I try to update via recovery it fails, cause: corrupted.
Any suggestion on this?
Thanks a lot in advance

ermonnezza said:
Hi, the link to the Leeco website is down...is there any alternative for downloading the latest stable EUI?
I downloaded the 23s from another website, renamed "update" but when I try to update via recovery it fails, cause: corrupted.
Any suggestion on this?
Thanks a lot in advance
Click to expand...
Click to collapse
You may try to use twrp to flash it, you downloaded version is a twrp backup version...

Thanks for the suggestion but I'm trying to get back to stock for other phone issues... So I wanted to avoid to install twrp, if possible.
Any link to a stock rom that can be updated via stock recovery?

You know I just going to blame Android 7.0 Nougat any chance we can have a CyanogenMod 13 6.01 based foxfi friendly ROM ?

ermonnezza said:
Thanks for the suggestion but I'm trying to get back to stock for other phone issues... So I wanted to avoid to install twrp, if possible.
Any link to a stock rom that can be updated via stock recovery?
Click to expand...
Click to collapse
I used the 23s from this link: https://bbs.le.com/zt/eui/le_max2.html
I flashed it from an indian rom. It will change your bootloader to chinese, though (not really an issue). And your recovery too, I guess (don't panic, it's bilingual). It will also update /firmware, and that should help with many issues.
However, there's no need to flash TWRP in order to use it: you can just boot it ( fastboot boot TWRPname.img).

At the last step, my indian rom is not getting flashed. Saying corrupted!!. Yesterday I updated with the same (rom) file from the system updater when I did not root the device.
"[Update]: There's a simple method you could try to get the Update Option Back in Le Max 2 Phone that arrived with Vendor ROM... Using the default File Manager Tap on the Update.zip file and select Upgrade Option. This will force the phone to Update using the ROM file. This method is for people who could not update through the Stock Recovery and received Errors."
Following these steps got the same error.
Edit: I am pretty much sure the developer chinese rom has the issue. It does not let you update with the Indian rom. Pretty bad.
Did anyone succeed to flash the indian rom the phone came with, or any indian rom from these chinese developer rom?
---------- Post added at 03:52 AM ---------- Previous post was at 03:15 AM ----------
BTW, the indian latest stock rom 5.8.019s can not be download from anywhere now. Can you give me a link that works now?

deltasata said:
At the last step, my indian rom is not getting flashed. Saying corrupted!!. Yesterday I updated with the same (rom) file from the system updater when I did not root the device.
"[Update]: There's a simple method you could try to get the Update Option Back in Le Max 2 Phone that arrived with Vendor ROM... Using the default File Manager Tap on the Update.zip file and select Upgrade Option. This will force the phone to Update using the ROM file. This method is for people who could not update through the Stock Recovery and received Errors."
Following these steps got the same error.
Edit: I am pretty much sure the developer chinese rom has the issue. It does not let you update with the Indian rom. Pretty bad.
Did anyone succeed to flash the indian rom the phone came with, or any indian rom from these chinese developer rom?
---------- Post added at 03:52 AM ---------- Previous post was at 03:15 AM ----------
BTW, the indian latest stock rom 5.8.019s can not be download from anywhere now. Can you give me a link that works now?
Click to expand...
Click to collapse
It is the link of stock Indian eui 5.8.019s
https://drive.google.com/file/d/0BymbvUDXUaNlTjN6X0g1ME1helk/view?usp=drivesdk

Akashsundar said:
It is the link of stock Indian eui 5.8.019s
https://drive.google.com/file/d/0BymbvUDXUaNlTjN6X0g1ME1helk/view?usp=drivesdk
Click to expand...
Click to collapse
Yes

Akashsundar said:
It is the link of stock Indian eui 5.8.019s
https://drive.google.com/file/d/0BymbvUDXUaNlTjN6X0g1ME1helk/view?usp=drivesdk
Click to expand...
Click to collapse
Thanks a lot

Have any one flash this ROM
If there is any bugs reply here I will prepare fix for it

Hello...
Where can I find the original rom for le max 2 x820 with no system update please
thanks .

http://g3.letv.cn/218/24/9/letv-hdt...1S-5.9.020S.zip?b=123456&platid=5&splatid=500
Is 23S whit recovery stock.

Ok so I did as said in your post, but big problem for me : My screen is not split in two and both side are reversed.... I tried install roms goind thought twrp the problem is the same, and doing the manipulation all over again trough flashone doesn't solve my problem either. I really need someone's help on this one please.
x820 64g 6g
---------- Post added at 04:23 PM ---------- Previous post was at 04:22 PM ----------
Akashsundar said:
Have any one flash this ROM
If there is any bugs reply here I will prepare fix for it
Click to expand...
Click to collapse
I do have problem (see the post right above). Any Ideas?

Ok so, I did as shown in the topic : https://forum.xda-developers.com/le-max-2/help/flash-eui-rom-fastboot-t3525831
download twrp (The one I know didn't had the touchscreen issue)
boot from twrp (wish I had know about it before!)
upload zip file to /sdcard ( here's the catch, while in TWRP in don't have access to adb, the phone doesn't connect to pc or I don't know even I mount it, could be me. So i just put the archive at the root of the phone before booting to twrp from adb)
install rom
reboot
And ... it's ****ING WORKING!*​​​​​​​
Really big thanks to ThE_MarD for his help!

HI, i hv the same problem likes yours with split screen.
Possible to share the steps how you manage to solved it.
Update:
Hi, I just managed to resolved it.
Download the given recovery 19S and save it on a USB drive.
Run twrp and press button wipe as our screen is reversed.
Then look for the file at external drive USB.
Just install it and once it is done..... the screen will return to normal

deltasata said:
At the last step, my indian rom is not getting flashed. Saying corrupted!!. Yesterday I updated with the same (rom) file from the system updater when I did not root the device.
"[Update]: There's a simple method you could try to get the Update Option Back in Le Max 2 Phone that arrived with Vendor ROM... Using the default File Manager Tap on the Update.zip file and select Upgrade Option. This will force the phone to Update using the ROM file. This method is for people who could not update through the Stock Recovery and received Errors."
Following these steps got the same error.
Edit: I am pretty much sure the developer chinese rom has the issue. It does not let you update with the Indian rom. Pretty bad.
Did anyone succeed to flash the indian rom the phone came with, or any indian rom from these chinese developer rom?
Click to expand...
Click to collapse
Hi.
Yes. After "QFIL", i also didn't update my device from DEV ROM with any Stock ROM (Indian or Chinese versions) by "upgrade.zip" without get the "corrupted file" error. So by TWRP, i installed 16S Indian Stock ROM -- TWRP informed that i have "no OS installed" but i proceeded and restarted from TRWP. It initialized the new ROM, and after the first setup, i restarted the device to complete any system operations after the first boot, and i updated the device with the Indian 19S with the EUI updater ( tapped "upgrade.zip" file). The device now have the stock recovery and boot in english (not chinese), and the EUI in all languages available on "India 19S Stock ROM".
Stock ROMS:
Le Max 2 All Official Stock Firmware links
Best regards.

NextGear said:
Hi.
Yes. After "QFIL", i also didn't update my device from DEV ROM with any Stock ROM (Indian or Chinese versions) by "upgrade.zip" without get the "corrupted file" error. So by TWRP, i installed 16S Indian Stock ROM -- TWRP informed that i have "no OS installed" but i proceeded and restarted from TRWP. It initialized the new ROM, and after the first setup, i restarted the device to complete any system operations after the first boot, and i updated the device with the Indian 19S with the EUI updater ( tapped "upgrade.zip" file). The device now have the stock recovery and boot in english (not chinese), and the EUI in all languages available on "India 19S Stock ROM".
Stock ROMS:
Le Max 2 All Official Stock Firmware links
Best regards.
Click to expand...
Click to collapse
Hey bro, I have the same problem. What twrp you used? When I try to install 16s indian twrp gives an error "Patching system image..." for too much long time, so it stop to install it.

Please help! I need to relock my bootloader.

Hey guys, how are you? So, let me explain my situation - I have a Redmi 7A (the 16 GB version) and I recently unlocked its bootloader to root, and uninstall some bloatwares ...... I managed to unlock the bootloader and install TWRP recovery, but I was unable to root, and i tried in a lot of ways, in a lot of times........... I'm on version 11.0.6 of MIUI, and I saw that some users here were having problems with this version too. Anyway, recently a MIUI update came out, and soon it will update to MIUI 12, but I'm not able to install the OTA update, after the phone restarts, it goes to TWRP recovery and shows an error message - so, I would like to go back to my original recovery and re-lock my bootloader, but for that I need the original recovery of the Redmi 7A, and I can't find it anywhere........
Someone here have this original recovery available to send or do upload? It would help me a lot! Thanks

eriksparks1 said:
Hey guys, how are you? So, let me explain my situation - I have a Redmi 7A (the 16 GB version) and I recently unlocked its bootloader to root, and uninstall some bloatwares ...... I managed to unlock the bootloader and install TWRP recovery, but I was unable to root, and i tried in a lot of ways, in a lot of times........... I'm on version 11.0.6 of MIUI, and I saw that some users here were having problems with this version too. Anyway, recently a MIUI update came out, and soon it will update to MIUI 12, but I'm not able to install the OTA update, after the phone restarts, it goes to TWRP recovery and shows an error message - so, I would like to go back to my original recovery and re-lock my bootloader, but for that I need the original recovery of the Redmi 7A, and I can't find it anywhere........
Someone here have this original recovery available to send or do upload? It would help me a lot! Thanks
Click to expand...
Click to collapse
I have detailed instructions - How to install TWRP + ROOT [Magisk] for redmi 7A HERE. Very easy. Please use google translate

sjcbank said:
I have detailed instructions - How to install TWRP + ROOT [Magisk] for redmi 7A HERE. Very easy. Please use google translate
Click to expand...
Click to collapse
Hi! I tried that way, but when i use the patched boot.img, it doesn't boot, and go straight to TWRP :/

eriksparks1 said:
Hi! I tried that way, but when i use the patched boot.img, it doesn't boot, and go straight to TWRP :/
Click to expand...
Click to collapse
If you can't do it, look down and read lesson #3, download ROM zip and txt files for flash via twrp. will definitely work 100%

eriksparks1 said:
Hi! I tried that way, but when i use the patched boot.img, it doesn't boot, and go straight to TWRP :/
Click to expand...
Click to collapse
Soo... I have problem too with root and I make temp root (unsafe method) . Patching boot img is idiot idea now , same as re-lock bootloader . I'm DEV and i'm know (look on my threads if you don't think). Better idea for you is download global rom or rom designed for your region . Actually i wipe my global rom and I install rom with android 10 . I have english only without polish support . All rom's is here : https://mirom.ezbox.idv.tw/en/phone/pine/ If you want to unbrick your device , download correct rom , and flash . For your bricked device is only fastboot rom for unbrick . In google you find how to install adb and fastboot drivers , disable check signatures of drivers in your windows , adb and fastboot exe file (if you have windows as me) etc. . Good luck . Disclaimer: After re-lock bootloader , your software and data be bricked , you must flash all with data too . Make copy of data to google or sd card
---------- Post added at 06:04 AM ---------- Previous post was at 05:58 AM ----------
https://flashxiaomi.com/download-install-miui-rom-for-xiaomi-redmi-7a-all-miui-firmwares/
---------- Post added at 06:15 AM ---------- Previous post was at 06:04 AM ----------
https://xiaomifirmwareupdater.com/miui/pine/