Samsung 2A charger head degrade? - Galaxy Note 4 Q&A, Help & Troubleshooting

Hi, is it possible for a charger head to get degraded?
My s5 charger used to to able charge at 2A, but now It can only charger less than 1A using my note 4 ogrinal cables
Sent from my SM-N910F using XDA-Developers mobile app

yea.. wear and tear condition.. try replacing the USB cable (high quality).. and test it again with USB volt meter...

I've had both the adapter and the cable go bad, so you'll have to check both.
Sent from my SM-N910T using Tapatalk

krobar77 said:
yea.. wear and tear condition.. try replacing the USB cable (high quality).. and test it again with USB volt meter...
Click to expand...
Click to collapse
I checked using charger doctor which tells me about the amount of A my charging is giving
Sent from my SM-N910F using XDA-Developers mobile app

rcobourn said:
I've had both the adapter and the cable go bad, so you'll have to check both.
Sent from my SM-N910T using Tapatalk
Click to expand...
Click to collapse
What do u meant by 'go bad' ? Do the refused to charge or charge at a very slow rate?
Sent from my SM-N910F using XDA-Developers mobile app

One adapter that would not charge at all, two cables that stopped doing fast charge but would still slow charge.
Sent from my SM-N910T using Tapatalk

See after using galaxy charging current app.

Related

Can I charge my n10 with my Samsung Galaxy S3 charger??

Figured I'd ask to see if that'd be OK before I did some damage.
Also could I do the reverse, charge my S3 with the n10 charger??
Thanks!!
sent from my blue police box flying through time!!!
Yes you can. They both use a standard Micro USB charger. Any other previous blackberry or android phone you may have lying round will also work
Sure you can.. But it might charge slowly if the power adapter isn't able to output 2A @ 5v
Sent from my SGH-I317M using xda app-developers app
ShadowVlican said:
Sure you can.. But it might charge slowly if the power adapter isn't able to output 2A @ 5v
Sent from my SGH-I317M using xda app-developers app
Click to expand...
Click to collapse
I'm using my S3 charger now on my N10. Charge time is the same.

Can my battery get damaged?

I've jsut found out that my charging cable(factory cable) is screwed.Sometimes it charges,sometimes not.My question is:can it damage the battery,or any hardware parts of the phone causing permanent issues?Of course,now i changed the cable to a good one...
If it sends the wrong voltage then yes but I highly doubt that since the USB Plug controls the voltage with the resistors and such.
Sent from my Nexus 4 using Tapatalk 4
andyabc said:
If it sends the wrong voltage then yes but I highly doubt that since the USB Plug controls the voltage with the resistors and such.
Sent from my Nexus 4 using Tapatalk 4
Click to expand...
Click to collapse
So i shouldn't worry about it,right?
lowert said:
So i shouldn't worry about it,right?
Click to expand...
Click to collapse
All safe.
Sent from my Nexus 4 using Tapatalk 4
lowert said:
I've jsut found out that my charging cable(factory cable) is screwed.Sometimes it charges,sometimes not.My question is:can it damage the battery,or any hardware parts of the phone causing permanent issues?Of course,now i changed the cable to a good one...
Click to expand...
Click to collapse
No you are completely safe.
Like said above, the usb cable just transfers power. The power source decides how much it charges your phone.
That's why charging your phone with your computer/laptop takes alot longer then using the wall charger.
Sent from my Nexus 4 using xda app-developers app
failly said:
No you are completely safe.
Like said above, the usb cable just transfers power. The power source decides how much it charges your phone.
That's why charging your phone with your computer/laptop takes alot longer then using the wall charger.
Sent from my Nexus 4 using xda app-developers app
Click to expand...
Click to collapse
Yep, it does 500Mah each port but if only one port is in use on a 3 port laptop then it would be 1500Mah.
Sent from my Nexus 4 using Tapatalk 4

[Q] Quick Charging Question

Can anyone help me understand why any other charger I use on my G2 charges very slowly (and tells me so)? I will get a wireless charger soon and keep the regular one in my work bag, but just trying to understand why anything but the one that came with the phone is such a dog even when it is plugged into the wall. thanks
The G2 charger outputs at a rate of 5v at 1.8amps. any charger that has a lower amp out will charger the phone at a slower rate and bring up the slow charge warning on the phone.
Sent from my LG-D802 using XDA Premium 4 mobile app
Kas206 said:
The G2 charger outputs at a rate of 5v at 1.8amps. any charger that has a lower amp out will charger the phone at a slower rate and bring up the slow charge warning on the phone.
Sent from my LG-D802 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
And you need a USB 3.0 cable with a charger having 1.8+ amp output. I tried using my ASUS tablet charger which has an output of 2amps and it still says slow charging. I also bought an aftermarket USB 2.0 cable and used the OEM LG charger and it will show slow charging also.
mouf32 said:
And you need a USB 3.0 cable with a charger having 1.8+ amp output. I tried using my ASUS tablet charger which has an output of 2amps and it still says slow charging. I also bought an aftermarket USB 2.0 cable and used the OEM LG charger and it will show slow charging also.
Click to expand...
Click to collapse
Just picked up this for $8 and it doesnt show slow charging.
http://www.amazon.com/dp/B005OD89MY/ref=pe_385040_30332200_pe_309540_26725410_item
MoNsTeReNeRgY22 said:
Just picked up this for $8 and it doesnt show slow charging.
http://www.amazon.com/dp/B005OD89MY/ref=pe_385040_30332200_pe_309540_26725410_item
Click to expand...
Click to collapse
Have you compared charging times between this and the OEM? The description seems to make it s match.
Sent from my LG-D800 using xda app-developers app
My stock Samsung 2 amp charger and cable works great. No slow charging.
Sent from my LG-D800 using Tapatalk 4

[Q] Stock charger only charging at 1A

Hey all,
The stock charger that I got with my S5 (Australian) says it's a 2A charger.
But when I plug it into the wall, it only charges at 1A.
Also happens when I use my 2A car charger.
Anyone else experience this issue?
Possibly only the cable can handle 1A have you tried a different usb cable?
Sent from my SM-G900I using Tapatalk
johnnyb33 said:
Possibly only the cable can handle 1A have you tried a different usb cable?
Sent from my SM-G900I using Tapatalk
Click to expand...
Click to collapse
Yeah, have tried a few genuine samsung cables
adizz131 said:
Yeah, have tried a few genuine samsung cables
Click to expand...
Click to collapse
ive had a s4, a note 3, and now the s5, have never seen it go over 1.2 amps using various cables and chargers.
using the galaxy charging current app to display the charge rate
markymarkis said:
ive had a s4, a note 3, and now the s5, have never seen it go over 1.2 amps using various cables and chargers.
using the galaxy charging current app to display the charge rate
Click to expand...
Click to collapse
Using the same app, used it on the S4 and now S5 and got the same result. About 1-1.2 amps
Ive had the same phones aswell and with the original usb 2.0 and usb 3.0 cables I get a consistant 1800mah through galaxy charging current app
Sent from my SM-G900I using Tapatalk
Stock rom and kernel will only charge at 1200ma max if the screen is on. It goes up to 1800ma with the screen off. The charge rate is still dependent upon having a good or a bad cable though
Sent from my SM-G900T using xda app-developers app

Charging the galaxy S4 using a powerbank/USB

Is there a way /mod to change the current when charging from a USB/ Powerbank?
I am using a powerbank with 2.1A output but when i use it in my phone i get 500mAh only.
Thanks!
Sent from my GT-I9505 using Tapatalk
conics said:
Is there a way /mod to change the current when charging from a USB/ Powerbank?
I am using a powerbank with 2.1A output but when i use it in my phone i get 500mAh only.
Thanks!
Sent from my GT-I9505 using Tapatalk
Click to expand...
Click to collapse
cus your powerbank is ****
conics said:
Is there a way /mod to change the current when charging from a USB/ Powerbank?
I am using a powerbank with 2.1A output but when i use it in my phone i get 500mAh only.
Thanks!
Sent from my GT-I9505 using Tapatalk
Click to expand...
Click to collapse
Hi,
Are you sure it's not the cable that is causing the problem? Does the device uses the whole current when charging from the factory wall charger? It's either this or your Powerbank doesn't give you the proper current.
~Lord
XxLordxX said:
Hi,
Are you sure it's not the cable that is causing the problem? Does the device uses the whole current when charging from the factory wall charger? It's either this or your Powerbank doesn't give you the proper current.
~Lord
Click to expand...
Click to collapse
using the cable on a wall chargee gives me 1200mAh average
1900mAh maximum
so i don't think it's an issue.
furthermore, I am able to chage an iPad using the same powerbank and it charges nicely.
i was just thinking i saw something in before where it changes the current from USB.
well thanks anyway. i guess i'll have to replace ny powerbank
Sent from my GT-I9505 using Tapatalk

Categories

Resources