CyanogenMod is a free, community built, aftermarket firmware distribution of Android 6.0 (Marshmallow), which is designed to increase performance and reliability over stock Android for your device.
Code:
/*
* Your warranty is now void.
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*
*/
CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. You will need to provide your own Google Applications package (gapps). CyanogenMod does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for CyanogenMod is available in the CyanogenMod Github repo. And if you would like to contribute to CyanogenMod, please visit our Gerrit Code Review.
Download Links
CyanogenMod:
OP EDIT : LINK REMOVED
Google apps:
opengapps.org
Note: You need to flash the package right after you install the ROM. If you boot up and then go back and flash it, your phone won't boot.
XDA:DevDB Information
CyanogenMod 13 for Pixelv1, ROM for the Lava Pixel V1
Contributors
MSF Jarvis, varun.chitre15
Source Code: github.com/TeamRedux/local_manifests/blob/cm-13.0-sprout/local_manifest.xml
ROM OS Version: 6.0.x Marshmallow
ROM Kernel: Linux 3.10.x
ROM Firmware Required: Unlocked Bootloader, TWRP 3.0.2-0 official recovery
Version Information
Status: Nightly
Created 2016-05-11
Last Updated 2016-06-24
What's Broken :
All services die if we toggle Airplane mode/WiFi and then lock screen before 5-10 minutes. Workaround already described, don't lock your device immediately after toggling a wireless interface
I'll slowly phase this out but please don't ask for an ETA.
@Dharma Samsthapana, can you please give a detailed list of what's working and what's not? Calling out @DHARMESH17 and @Suraj Pandey as well.
MSF Jarvis said:
@Dharma Samsthapana, can you please give a detailed list of what's working and what's not? Calling out @DHARMESH17 and @Suraj Pandey as well.
Click to expand...
Click to collapse
here are the issues iv'e found so far :
Working -
calling, wifi ,Gps, proximity sensor ,light sensor ,
Not Working
Camera app missing , 3rd party camera apps are not working as well
Bluetooth
Audio - no audio from both the speakers, microphone not working ,music player & Audio Fx force close
Hall sensor
battery status
Can't play any video
About -Device Model = Unknown
Dharma Samsthapana said:
here are the issues iv'e found so far :
...
Hall sensor
...
Click to expand...
Click to collapse
What's the "Hall Sensor"??
MSF Jarvis said:
What's the "Hall Sensor"??
Click to expand...
Click to collapse
magnet sensor
@Dharma Samsthapana bunch of logcats needed from the 201605(08|10) nightly (nightlies)
1) Trying to play video, capture a log of 1 minute before up till one minute after the attempt.
2) Same timings with Bluetooth toggle
3) Logcat of booting up also required, i.e. when device is on the bootanimation (needed to verify battery percentage fix)
MSF Jarvis said:
@Dharma Samsthapana bunch of logcats needed from the 201605(08|10) nightly (nightlies)
1) Trying to play video, capture a log of 1 minute before up till one minute after the attempt.
2) Same timings with Bluetooth toggle
3) Logcat of booting up also required, i.e. when device is on the bootanimation (needed to verify battery percentage fix)
Click to expand...
Click to collapse
here are the logs you asked
Dharma Samsthapana said:
here are the logs you asked
Click to expand...
Click to collapse
Bluetooth and video logs are kinda small. Can you provide them again? Thanks in advance.
Edit: Battery Stats seem to be an SELinux denial issue, will investigate, in the meantime please try the 20160511 nightly from the same link : http://msfjarvis.me/ROMs
@MSF Jarvis thanks hope bug fix soon
What do you think
devansh21 said:
@MSF Jarvis thanks hope bug fix soon
What do you think
Click to expand...
Click to collapse
NO ETA
MSF Jarvis said:
NO ETA
Click to expand...
Click to collapse
No problem
No hurry for better ROM
Because cm 13 is serious man
---------- Post added at 03:15 PM ---------- Previous post was at 03:15 PM ----------
devansh21 said:
No problem
No hurry for better ROM
Because cm 13 is serious man
Click to expand...
Click to collapse
Hey before flashing ROM did I need to wipe anything
---------- Post added at 03:16 PM ---------- Previous post was at 03:15 PM ----------
@MSF Jarvis
devansh21 said:
No problem
No hurry for better ROM
Because cm 13 is serious man
---------- Post added at 03:15 PM ---------- Previous post was at 03:15 PM ----------
Hey before flashing ROM did I need to wipe anything
---------- Post added at 03:16 PM ---------- Previous post was at 03:15 PM ----------
@MSF Jarvis
Click to expand...
Click to collapse
You need a clean wipe
@devansh21 and @Dharma Samsthapana please disable SELinux using :
Code:
setenforce 0
in a terminal and report back with what bugs does it fix(should fix a bunch of the serious ones IIRC)
MSF Jarvis said:
@devansh21 and @Dharma Samsthapana please disable SELinux using :
Code:
setenforce 0
in a terminal and report back with what bugs does it fix(should fix a bunch of the serious ones IIRC)
Click to expand...
Click to collapse
nothing happened, it did fix nothing
Dharma Samsthapana said:
nothing happened, it did fix nothing
Click to expand...
Click to collapse
Pah, gonna disable SELinux for now still.
Added build status badge to OP. Let me know if you see a failed build and I don't mention it here.
Just now tested the 5/11 build ,all the bugs are still there
Dharma Samsthapana said:
Just now tested the 5/11 build ,all the bugs are still there
Click to expand...
Click to collapse
I know, the nightlies are for upstream CyanogenMod updates. @DHARMESH17 just PM'ed me saying he fixed some bugs, but hasn't told which or how. Awaiting his reply.
P.S. Which browser do you have with the ROM?
Edit: Can you look up on Google how to get a dmesg on Android and grab the one just after boot? TIA
MSF Jarvis said:
I know, the nightlies are for upstream CyanogenMod updates. @DHARMESH17 just PM'ed me saying he fixed some bugs, but hasn't told which or how. Awaiting his reply.
P.S. Which browser do you have with the ROM?
Click to expand...
Click to collapse
The one that comes by default with CM ,and there's another issue ,flash light from drop down menu is also not working
Related
CyanogenMod-7.1.0-RC1-Cooper-KANGAndroid 2.3.7
Original post on 4pda.ru
ROM (for flashing from stock or other custom ROMs): cm-7.1.0-RC1-Cooper-KANG-10.10.11-Grif_07.zip
ROM (for updating from CyanogenMod-7.1.0-Cooper-KANG-Beta1 or Beta2): cm-7.1.0-RC1-Cooper-KANG-10.10.11-Grif_07_update.zip (no need wipe, all your data will be saved, but wipe dalvik cache is necessary)
What new in RC1 build:
- full odexed ROM (more performance, more free space on \data);
- new kernel from ketut;
- no more accidentally rejected calls by pressing "Back" button (function disabled);
- FM Radio app's graphics bug fixed;
- GoogleApps updated to 28.08.2011 version (except Market);
- cifs.ko, tun.ko, zram.ko modules updated;
- lights.cooper.so lib updates;
- noise suppression in call enabled.
Fixes (flash from recovery):
cm-7.1.0-RC1-Fix1-12.10.11-Grif_07.zip
Fixed in cm-7.1.0-RC1-Fix1-12.10.11:
- fixed kernel from ketut, without oc (if you want overclocking, you need reflesh oc-kernel);
- updated cifs.ko, tun.ko, zram.ko modules;
- 640x480 videorecording, better sound quality in video (thanks a lot to ya.AVG from 4pda.ru).
All info about CyanogenMod you can find here.
How to install:
You need a stock or custom rom with Android 2.3.*
You need ClockWorkMod4 or ClockWorkMod5 installed (I recommend this recovery)
Copy cm-7.1.0-RC1-Cooper-KANG-10.10.11-Grif_07.zip on SDcard
Reboot into ClockWorkMod, wipe data/factory reset. If you using BehradGH CyanoAce, you need format /system in CWM before flashing this rom .
Flash cm-7.1.0-RC1-Cooper-KANG-10.10.11-Grif_07.zip from recovery
Reboot your phone (first boot will take some time)
Happy testing
What is fixed:
- new kernel from ketut, more info here
- Superuser.apk and su latest beta version
- CWM Manager
- Better workaround solution for button lights and BLN
- camera fixed
- Video playback fixed
- Setup wizard fixed
- headset button now working
- FM Radio is working now! (libaudio sources kanged from psyke83)
- compass is working correctly now. All sensors works! GPS Status working correctly.
- Torch working, including from button widget (turn the LED flaslight from status bar)
- compcache and swap support, compatible tun and cifs modules included
- camera orientation bag in Beta2 fixed
- fix Build number to GWK74
- Fix headphone/headset audio routing (better sound quality in headphone/headset) from psyke83
Screens here.
Cyanogenmod 7 on the Samsung Galaxy Ace
Thanks to BehradGH and his team.
Thanks to coolya, PabloPL and psyke83 for sources.
Thanks to ketut.kumajaya for many fixes and kernel.
Thanks to gorolegov from 4pda.ru for camera fix and helping with FM Radio.
Thanks guru2468 for video.
Special thanks to Lovetz and all 4pda.ru forum members
woot im first nice to see first kang build
Hmmm. Wifi does not scan. Maybe a reflash might work.
Thanks Lovetz for the Multiupload link :-D Also the browser seems to crash o.0
an0nym0us_ said:
woot im first
Click to expand...
Click to collapse
The fist was Coolya;-)
---------- Post added at 04:41 PM ---------- Previous post was at 04:39 PM ----------
MrChaosDesire said:
Hmmm. Wifi does not scan. Maybe a reflash might work.
<3 CyanoAce 7.1
Click to expand...
Click to collapse
Wi-Fi works fine, but when you turn it ON you can`t see all points, as on stock FW. You must go to the Wireless setting and insert your password there.
Flash Player Works
Grif_07 said:
... not working only FM radio, camera, compass, root...
[*]This is fully build from the CM source with using coolya's and PabloPL config files,...
Click to expand...
Click to collapse
Hi
That's strange, if You build using my config, you should get all sesors working.
PS:
I also wanted to release ROM, but after getting camera to work , fixing root and new recovery, but you were first.
is the functionality of all hardware and software working?
PabloPL said:
I also wanted to release ROM, but after getting camera to work , fixing root and new recovery, ...
Click to expand...
Click to collapse
Sounds good!
---------- Post added at 05:04 PM ---------- Previous post was at 05:02 PM ----------
angeleo02 said:
is the functionality of all hardware and software working?
Click to expand...
Click to collapse
Not working: camera, FM, compass, no root.
Lovetz said:
Sounds good!
---------- Post added at 05:04 PM ---------- Previous post was at 05:02 PM ----------
Not working: camera, FM, compass, no root.
Click to expand...
Click to collapse
sorry i miss that part,i'm excited about this ROM
downloading... crossed finger =)
thanks for the effort,,,, 2.3.5? CM7 wowwwwwwwwwwww!!!
thanks =)
PabloPL said:
Hi
That's strange, if You build using my config, you should get all sesors working.
PS:
I also wanted to release ROM, but after getting camera to work , fixing root and new recovery, but you were first.
Click to expand...
Click to collapse
I got many errors when compiling ... some libraries were missing. This is my first experience in Android compiling. ) And kernel.org does not work, had to look Android source at the third-party resources. Perhaps the most problems because of this. I will be very happy if you fix these bugs and release you ROM. Thanks to you for your configs.
Screenshots:
Thanks a lot, Lovets! added to first post!
the download stats for cooper at http://stats.cyanogenmod.com/ are for this ROM of yours? Or official one being tested?
Lovetz said:
Screenshots:
Click to expand...
Click to collapse
LOL at the hosting website:
Grif_07 said:
I got many errors when compiling ... some libraries were missing. This is my first experience in Android compiling. ) And kernel.org does not work, had to look Android source at the third-party resources. Perhaps the most problems because of this. I will be very happy if you fix these bugs and release you ROM. Thanks to you for your configs.
Click to expand...
Click to collapse
I'm build my rom with
Code:
. build/envsetup.sh
brunch cooper
It worked for me without any errors. It's strange..
russ18uk said:
LOL at the hosting website:
Click to expand...
Click to collapse
But it is not buggy as a forum)
PabloPL said:
I'm build my rom with
Code:
. build/envsetup.sh
brunch cooper
It worked for me without any errors. It's strange..
Click to expand...
Click to collapse
yes... I do the same. I think i have wrong sources. waiting for kernel.org rebirth. )
---------- Post added at 04:36 PM ---------- Previous post was at 04:33 PM ----------
fantomatico said:
the download stats for cooper at http://stats.cyanogenmod.com/ are for this ROM of yours? Or official one being tested?
Click to expand...
Click to collapse
for this rom.
Is this CM7 pre rooted or we have to use superoneclick to root it as there in behrad's CM7????
Sent from my GT-S5830 using XDA Premium App
is the rom working properly...i.e camera compass etc.
and further adobe Flash is working....
About Omni: Omni is a free, community built, aftermarket firmware distribution of Android 4.4 (KitKat), which is designed to increase performance and reliability over stock Android for your device.
Disclaimer: I am not responsible for bricked devices, dead SD cards, thermonuclear war, or you getting fired because the alarm app failed. Please do some research if you have any concerns about features included in this ROM before flashing it! YOU are choosing to make these modifications, and if you point the finger at me for messing up your device, I will laugh at you.
This is a port of Mackay OMNI ROM of the Samsung Galaxy S made by kasper_h.. I just ported this amazing rom to our Samsung Captivate
If you run into errors, I may not be able to solve it!
If you know a solution to a problem, either upload it yourself to Gerrit Code Review or contact me through pm.
The ROM is based on Omni sources with the following changes:
-mohammad.afaneh's Kernel
-Set of cherries picked from gerrit (differing by the day)
-Some additional patches to the source code
Feature request are OK, but remember:
1. I try to stay close to stock
2. I will not include additional apps, unless they can be build from source
3. The time I spend on features depends on how much I like them myself
Although it is possible to enable ART, this is not advisable:
-Takes long to convert from Dalvik to ART on first boot
-Needs more RAM
-Can cause soft reboots
But off course, YMMV -> light users may have better luck
Changelog of 27-Feb-2014
-Omni codebase of 26-Feb (e.g. new bootanimation )
-QS Ribbon is gone
-Mackay kernel included
-Mackay settings no FC
Full changelog of compared to stock Omni
Omni sources of 27-Feb-2014
To see the additions on top of Omni, check github (additional patches are always shown on top):
Settings
OmniGears
Frameworks
Kernel
Fresh install:
Can be flashed on top of any ROM:
-Do a factory reset
-Wipe /system
-Flash ROM
-Flash gapps
-Reboot your phone
Update:
-Flash ROM
-Reboot your phone
(no wipes or other things needed, just flash & reboot)
Credits:
-Omni team for in incredible job on the ROM base
-OmNomteam: great group of Omni fanatics
-teamhacksung/pawitp for making KitKat work on our ancient phone
-kasper_h for making the rom and kernel
-mohammad.afaneh for his souces
Contributors:
kasper_h
ROM OS Version: 4.4.x KitKat
Based On: Omni
Donations:
kasper_h
Created 2013-12-15
Last Updated 2014-02-27
Known issues:
-??? tell me!
Downloads:
Rom
Gapps
multi window and call popout included?
ajeesh vijayan said:
multi window and call popout included?
Click to expand...
Click to collapse
Yes
Sent from my SGH-I897 using XDA Premium 4 mobile app
nav bar?
ajeesh vijayan said:
nav bar?
Click to expand...
Click to collapse
No
smooth...great work dude..expecting nav bar and SD card fix
Changelog of 17-Dec-2013
-Based on omni source of 17-Dec-2013
-Using mohammad.afaneh's Neat Kernel
-Google backup/restore in ROM fixes
-CM calculator with more features
-CM Exchange & Email - my corporate Exchange account works fine for me now
-Many minor patches merged (see github for details)
Downloads:
Dev-Host
SD card fixed? halo? quick tile ? fixed?
ajeesh vijayan said:
SD card fixed? halo? quick tile ? fixed?
Click to expand...
Click to collapse
no halo..
SD card is read on the phone but it does not show up when connected to the PC..
Changelog of 21-Dec-2013
-Based on omni source of 21-Dec-2013
-Fixes to PIN screen
-Added quick pulldown for QS back
-Added back button kills app back in development settings (could already be programmed through settings>buttons, but this should be a better solution)
-Updates to DSP Manager
-New volume panel colours (to match kitkat)
-Improved some animations
Downloads:
Dev-Host
bug?
phone takes 2-3 seconds to turn screen on for incoming calls..
ajeesh vijayan said:
phone takes 2-3 seconds to turn screen on for incoming calls..
Click to expand...
Click to collapse
Yes it is a known issue.....
This is probably due to our hardware
Sent from my SGH-I897 using XDA Premium 4 mobile app
ajeesh vijayan said:
phone takes 2-3 seconds to turn screen on for incoming calls..
Click to expand...
Click to collapse
This issue is present in every 4.4 ROM, unfortunately, and is the main reason for me to go back to 4.2 ROM.
Going to try this now
Sent from my SGH-I897 using Tapatalk
---------- Post added at 10:02 PM ---------- Previous post was at 09:03 PM ----------
When flashing the rom i get a message saying that it will flash stock recovery, what is that about?
---------- Post added at 10:19 PM ---------- Previous post was at 10:03 PM ----------
too lagy
---------- Post added at 10:26 PM ---------- Previous post was at 10:19 PM ----------
how to i revert back to my old ROM. it telling me that m5 is missing
Changelog of 28-Dec-2013
-Omni codebase of 27-Dec
-Added a basic QS toggle modification patch (based on AOSPA -> press the new edit button above the toggles to modify the QS toggle screen -> press to remove/add / hold to move around)
-Some ActiveDisplay fixes
-Some Camera fixes
Downloads:
Dev-Host
will there be an update..just asking.. no eta..
ajeesh vijayan said:
will there be an update..just asking.. no eta..
Click to expand...
Click to collapse
Yess..
Bcoz of exams i didn't update..
It will come today or tomorrow..
Sent from my SGH-I897 using XDA Premium 4 mobile app
thank you..
Changelog of 24-Jan-2014
-Omni codebase of 23-Dec
-Huge number of upstream updates (see github for details)
-External SD should work now(i guess, somebody please confirm)
-Improved multi-window code
-Many more QS tiles
-Blurred lockscreen see-through (enable in settings>security>lockscreen section)
-Dark UI (not 100% working yet, but almost complete)
-Improvements to privacy guard (which now is available through the main settings screen) and improved Appops settings
-Increasing ringtone volume
-Ability to change hostname of device
-Improved animation control
-Improved lockscreen notifications
Downloads:
D-h.st
New rom arrived by; @Fabio silva
Deodexed and Modded by: @Fabio silva
Maintainer: @Fabio silva
Im not the creator of this rom i post... if you want to report bug issues came from this rom just go to Original post of @Fabio silva.
Developer: @Fabio silva
GIGAROM based on the stock Deox S232, combines the best of the tweaks ha, its main feature and its light weight, fully optimized and updated until the present date.
Many native apps always seeking the performance and battery performance have been removed.
Original Post
Just go to this link to see whats the features and donwload link
https://plus.google.com/116234435121562380724/posts/XL5d9fgHBA6
*VoLTE feature is here, because its based on Stock, so the stock rom starting on s232 has a inbuilt Voice-over LTE feature.
Features:
V1
[*]Supersu 2.79
[*] home arowlauncher
[*] port apps sony
[*] RAMclenup
[*] Camera lenovo updated stock
[*] Bootanimation Android 8
[*] BusyBox-1.26.2
[*] BXRSVengine.arm.v4.0
[*] root xplore
[*] Simple reboot
[*] Battery saving
[*] Disable all android log
[*] tweak davilk
[*] Small cache tweak
[*] zipalign
[*] Deox
[*] sqlite support
[*] kernel sleepers
Changelog
Code:
[B]New Updatev1.2
[LIST]
[*]Boost Sound
[*]Added Magisk v12.0
[*]200% vfs cache pressure
[*]Removed SuperSU Root
[*]MOD powertweaks
[*]New miravision libs
[/LIST]
v1.1[/B]
[LIST]
* Add Sony Framework
* Add footej camera (premium)
* Simple reboot
* New Build prop
* New VM values
* Add cleaning every boot xclean
* Add wild permission
* Add xtrim every reboot
* Add xdrop cache every boot
* Add sleeper
* Add kill media
[/LIST]
More thanks to @Fabio silva
Version Information
Created : 05-12-17
Version: 1.2
Update :
Based on: S232 Stock ROM
Photo
New rom, thanks. Will try it soon.
VOLTE supported??
TheRSW said:
VOLTE supported??
Click to expand...
Click to collapse
Yes
Nng
What about xposed? Working?
Anyone who had installed this rom,please post review and some screenshots plz!
patulluciano said:
What about xposed? Working?
Click to expand...
Click to collapse
yes working fine
screenshots
Some screenshots
patulluciano said:
What about xposed? Working?
Click to expand...
Click to collapse
Yup 100% working
V87 of xposed
---------- Post added at 05:51 PM ---------- Previous post was at 05:45 PM ----------
elchin.shamilov said:
Nng
Click to expand...
Click to collapse
??
:good:
TheRSW said:
Yup 100% working
V87 of xposed
---------- Post added at 05:51 PM ---------- Previous post was at 05:45 PM ----------
I can installed xposed 87, but after installed some modules and reboot, i got bootloop. Same problem with nikali v4 and macblaze rom which are based on 232. People said that the problem caused by december security patch. Did you've got no problem after install modul? Tell me how you did it bro?
Click to expand...
Click to collapse
patulluciano said:
TheRSW said:
Yup 100% working
V87 of xposed
---------- Post added at 05:51 PM ---------- Previous post was at 05:45 PM ----------
I can installed xposed 87, but after installed some modules and reboot, i got bootloop. Same problem with nikali v4 and macblaze rom which are based on 232. People said that the problem caused by december security patch. Did you've got no problem after install modul? Tell me how you did it bro?
Click to expand...
Click to collapse
I'm on gigarom and don't have any problem like bootloop . Ya I face that problem in nikali and macblaze but sometime.
Click to expand...
Click to collapse
New up v1.1 by @Fabio silva
You can download zip file here in original post
https://plus.google.com/116234435121562380724/posts/XL5d9fgHBA6
Now xposed working great on v 1.1. but no volte, there is no switch for it. I was on macblaze 230 before flashed this Rom (there is no volte either before). Should i downgrade to official row230 before upgrade to this Rom?
Want to setup the finger print lock... can't find
Solved after reboot it showed up..
Good rom .. thank-you..
edarick said:
New up v1.1 by @Fabio silva
You can download zip file here in original post
https://plus.google.com/116234435121562380724/posts/XL5d9fgHBA6
Click to expand...
Click to collapse
What's the SOT
hello i have problem with russian language . - some russian words
MegaStali said:
hello i have problem with russian language . - some russian words
Click to expand...
Click to collapse
Translate them by using Google translate
Oneplus 5T Port (OB24-1-19-pie) By @jadeja shaktisinh
For Vince
OxygenOS is a customized version of the Android mobile operating system developed by Chinese smartphone manufacturer OnePlus exclusively for their smartphones.
Click to expand...
Click to collapse
This rom is ported from the beta releases of Oneplus 5T by @jadeja shaktisinh
How To Install:-
Wipe Cache,Dalvik,Data,System and Vendor.(No need to wipe Internal Storage)
Flash latest china beta firmware for good battery and deep sleep(Optional)
Flash the rom package
Reboot
Gapps is not needed to be flashed.
Note:-First boot may take 4-5 minutes.
Bugs:-
Face lock
Ambient display
Off-screen gesture
Maybe more
Downloads:-
ROM :- https://drive.google.com/file/d/1lYYyuW9xXhGVumOXdHb2XrQE3JGZQjVs/view?pli=1
Troubleshootings:-
-If you face green whatsapp camera bug,remove cam2api in system/vendor/build.prop
-If you face headset bug just flash the headsetfix zip provided below.
- Disable noise cancellation option in phone settings to fix the issue of calls using earphones
ROM OS Version: 9.x Pie
ROM Kernel: Linux 3.x
ROM Firmware Required: TWRP, Unlocked bootloader
Contributions:-
@jadeja shaktisinh(The one who ported the rom)
@Boos4721 (Without whom this port wouldn't be possible)
@GeraldF7(For constant help and support)
Donations:-
https://www.paypal.me/smjadeja
Created:- 2019-02-18
Last Updated:- 2019-02-18
Changelogs:-
Hotspot Fixed
No need to force reboot
Pre rooted just install Magisk manager
Camera works
Navigation gestures fully working
Screenshots
Nice rom Bro :good:
Thanks for the rom
Camera is crashing
Gcam is crashing
Open camera working good
UPDATE
camera working fine after disabling camera 2 api
this ROM support F2FS without bootloop?
megaabel90 said:
this ROM support F2FS without bootloop?
Click to expand...
Click to collapse
Not tried
---------- Post added at 03:53 AM ---------- Previous post was at 03:49 AM ----------
megaabel90 said:
this ROM support F2FS without bootloop?
Click to expand...
Click to collapse
Not tried
TheKsM said:
Nice rom Bro :good:
Click to expand...
Click to collapse
Enjoy and if you face any bugs please report??
giannis_25 said:
Thanks for the rom
Camera is crashing
Gcam is crashing
Open camera working good
UPDATE
camera working fine after disabling camera 2 api
Click to expand...
Click to collapse
Ofc
Double tap to wake work?
Irfan_ said:
Double tap to wake work?
Click to expand...
Click to collapse
Working as expected
Headset fixer not working.phone heating up rapidly.what to do,any fixes
sexbuddytt said:
Headset fixer not working.phone heating up rapidly.what to do,any fixes
Click to expand...
Click to collapse
No such problems here. Try clean flash again.
No issues no as I flashed the headset fixer zip via magisk.thanks anyway for such an amazing port of an amazing rom
Rom is not smooth as miui, I'm uninstalled today. And flashback to miui pro. Hope a not laggy rom will come for our device
jadeja shaktisinh said:
Not tried
---------- Post added at 03:53 AM ---------- Previous post was at 03:49 AM ----------
Not tried
Click to expand...
Click to collapse
F2FS=bootloop :C
But "VIMB kernel" works well and has a good perfomance this ROM
---------- Post added at 04:31 PM ---------- Previous post was at 04:10 PM ----------
I have a question, why does the desktop expanded in games look so...square?
I can configure that?(sorry for my question noob)
---------- Post added at 04:53 PM ---------- Previous post was at 04:31 PM ----------
megaabel90 said:
F2FS=bootloop :C
But "VIMB kernel" works well and has a good perfomance this ROM
---------- Post added at 04:31 PM ---------- Previous post was at 04:10 PM ----------
I have a question, why does the desktop expanded in games look so...square?
I can configure that?(sorry for my question noob)
Click to expand...
Click to collapse
ignore my question, i'll fix it xd
Everything works fine except tat ambient display and lockscreen gestures........ But little bit laggy can be fixed with kernel auditor
Camera working absolutely fine
Settings Keeps crashing!!!
This is the message that is being displayed after the first and every boot!! I have done all the clears except internal storage still it is displaying the same and this cannot be minimized also!! Kindly help me with this issue
Sainath2000 said:
Settings Keeps crashing!!!
This is the message that is being displayed after the first and every boot!! I have done all the clears except internal storage still it is displaying the same and this cannot be minimized also!! Kindly help me with this issue
Click to expand...
Click to collapse
It says like setting or something isn't responding....... Click on wait and it ll be solved
Sainath2000 said:
Settings Keeps crashing!!!
This is the message that is being displayed after the first and every boot!! I have done all the clears except internal storage still it is displaying the same and this cannot be minimized also!! Kindly help me with this issue
Click to expand...
Click to collapse
Its only once during every boot. It shouldn't be a problem
INTRODUCTION
Base Kernel + Upstreamed Linux + Updated CAF sources
Note: Only for custom rom
FEATURES
• Linux version 4.9.183
• CAF Tag LA.UM.7.8.r1-05600-sdm710.0
CHANGELOG
26-06-2019
- Upstreamed to 4.9.183
- Updated CAF sources from LA.UM.7.8.r1-04400-sdm710.0 to LA.UM.7.8.r1-05600-sdm710.0
INSTALLATION INSTRUCTIONS
Download latest kernel version
Boot to recovery
Flash kernel.zip
Reboot to system
DOWNLOAD LINK
24-06-2019 - https://drive.google.com/open?id=1EPDqyrvGylYOk_wlE33pqPnQOWes5wdg
SOURCES
https://github.com/solidv
CREDITS
https://github.com/guoxiao1213
Reserve for your good work Buddy:highfive:
zakwanPHG said:
Reserve for your good work Buddy:highfive:
Click to expand...
Click to collapse
Thank you. Everything working fine?
Enviado do meu MI 8 SE através do Tapatalk
solidv said:
...Everything working fine?
Click to expand...
Click to collapse
Installed in the morning via PitchBlack-Recovery on DotOS-Extended 3.3.
Much better responsibility of the system, especially opening apps. Battery usage seems to be the same, but its now still to early to sum up.
DeepSleep has slightly increased.
I'm happy with the kernel, thank you very much!
Finally , Sirius kernel
DC dimming doesnt work with this kernel screen is always black fix it please thanks
Downloaded, I will install it and test it. I use the DotOs-Extended rom.
Thank you very much for your work.
How can I uninstall that zip? it has error there is very slow to turn on screen
Aung Minn Htet said:
How can I uninstall that zip? it has error there is very slow to turn on screen
Click to expand...
Click to collapse
Reboot to recovery
Don't wipe/delete anything
Flash your rom .zip :good:
Working on Bootlegger Rom.
---------- Post added at 07:32 AM ---------- Previous post was at 07:32 AM ----------
Zimtsäure said:
Installed in the morning via PitchBlack-Recovery on DotOS-Extended 3.3.
Much better responsibility of the system, especially opening apps. Battery usage seems to be the same, but its now still to early to sum up.
DeepSleep has slightly increased.
I'm happy with the kernel, thank you very much!
Click to expand...
Click to collapse
How to check deepsleep time?
loveuhp said:
Working on Bootlegger Rom.
---------- Post added at 07:32 AM ---------- Previous post was at 07:32 AM ----------
How to check deepsleep time?
Click to expand...
Click to collapse
Use any battery manager app with root access from store
loveuhp said:
How to check deepsleep time?
Click to expand...
Click to collapse
Settings -> About phone -> Uptime
On DotOS-Extended deep sleep is shown in brackets.
When i change brightness my phone auto set max brightness
I must lock screen and unlock screen brightness ok
How to fix it?
I using Miui 9
tam1012 said:
When i change brightness my phone auto set max brightness
I must lock screen and unlock screen brightness ok
How to fix it?
I using Miui 9
Click to expand...
Click to collapse
Its not for miui i think,,, only custom rom like base aosp
I can use this kernel on xiaomi. EU rom?
Please add support for MIUI roms, many people use MIUI or MIUI based roms like xiaomi.eu and this phone dont have many support... we need at least 1 valid kernel for all roms.
stepchild is mi 8SE...
Please, can you upload it again? Link is broken
Thread closed per OP's request.
Thank you for your contributions:highfive:
strongst
Forum Moderator