Database Users

[Q] Help! Lenovo yoga 2 tab 1050L broke

My yoga 2 1050L broke while I tried to flash it with:
"Rooted_YT2_10_prc_call-blankphone-user-YT2-1050LC_USR_S000018_1409241649_WW21_CN"
It was flashing well untile 88% "unknown commend"
now I'm getting "EFI BOOT FAIL HARD DRIVE" and it's keep opening the bios,
and I can't even flash it with the 1050L stock rom

??????????????

MohamedStar said:
??????????????
Click to expand...
Click to collapse
1. power off the tablet if it's on (long press pwr btn until shuts off)
2. press and hold Vol+ & Vol- keys, while keeping them pressed press shortly(2-3 sec) PwrOn btn to start tablet, keep Vol keys pressed until the screen says: starting fastboot.. after you can release them (this fastboot mode is different in regards to the standard one as it is started directly from BIOS, disregarding what you have/or not have on your hard drive, so it's good for unbricking), the screen will remain unchanged to the starting fastboot message, but that's ok, the bios is waiting commands already
3. flash your stock ROM as usual (use flash.xml file) using Intel Flash Tool
for root use the much more simpler(generic and safe) method described here http://forum.xda-developers.com/showpost.php?p=62815888&postcount=698

Please Help!!!!!!
ionioni said:
1. power off the tablet if it's on (long press pwr btn until shuts off)
2. press and hold Vol+ & Vol- keys, while keeping them pressed press shortly(2-3 sec) PwrOn btn to start tablet, keep Vol keys pressed until the screen says: starting fastboot.. after you can release them (this fastboot mode is different in regards to the standard one as it is started directly from BIOS, disregarding what you have/or not have on your hard drive, so it's good for unbricking), the screen will remain unchanged to the starting fastboot message, but that's ok, the bios is waiting commands already
3. flash your stock ROM as usual (use flash.xml file) using Intel Flash Tool
for root use the much more simpler(generic and safe) method described here http://forum.xda-developers.com/showpost.php?p=62815888&postcount=698
Click to expand...
Click to collapse
sorry to say but the following didn't work for me still stuck in bios and Flash Tool keeps saying
05/26/16 00:07:14.679 INFO : Port 0/10: Rebooting BaytrailD13EBC1E in Provisonning OS (current state = DNX_STATUS)
05/26/16 00:07:14.679 INFO : Port 0/10: Cannot Reboot android device, status is DNX_STATUS
so now what need to fix this device!! PLEASE HELP!! ;-(

TechTanium said:
sorry to say but the following didn't work for me still stuck in bios and Flash Tool keeps saying
05/26/16 00:07:14.679 INFO : Port 0/10: Rebooting BaytrailD13EBC1E in Provisonning OS (current state = DNX_STATUS)
05/26/16 00:07:14.679 INFO : Port 0/10: Cannot Reboot android device, status is DNX_STATUS
so now what need to fix this device!! PLEASE HELP!! ;-(
Click to expand...
Click to collapse
Try this
http://www.teamandroid.com/2012/07/30/how-to-set-up-adb-fastboot-with-android-sdk/3/
Don't unplug the USB, every time u unplug the USB you must update the driver again
I don't know if this'll work for you I'm not developer but you can try.

ok tryed to follow that tortorial but when I get to devece manager step I get this for my tablet on fastboot + usb conected !!
Screen shot
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
PLEASE HELP NEED MY TAB TO WORK!! ;-((
MohamedStar said:
Try this
Don't unplug the USB, every time u unplug the USB you must update the driver again
I don't know if this'll work for you I'm not developer but you can try.
Click to expand...
Click to collapse
---------- Post added at 12:40 AM ---------- Previous post was at 12:33 AM ----------
ok tryed to follow that tortorial but when I get to devece manager step I get this for my tablet on fastboot + usb conected !!
Screen shot Gyazo Screen shot number 7d530b85044c23739eab9a4df4c2d826
PLEASE HELP NEED MY TAB TO WORK!! ;-((
MohamedStar said:
Try this
Don't unplug the USB, every time u unplug the USB you must update the driver again
I don't know if this'll work for you I'm not developer but you can try.
Click to expand...
Click to collapse

TechTanium said:
ok tryed to follow that tortorial but when I get to devece manager step I get this for my tablet on fastboot + usb conected !!
Screen shot
PLEASE HELP NEED MY TAB TO WORK!! ;-((
---------- Post added at 12:40 AM ---------- Previous post was at 12:33 AM ----------
ok tryed to follow that tortorial but when I get to devece manager step I get this for my tablet on fastboot + usb conected !!
Screen shot Gyazo Screen shot number 7d530b85044c23739eab9a4df4c2d826
PLEASE HELP NEED MY TAB TO WORK!! ;-((
Click to expand...
Click to collapse
If u able to go throw fastboot then try to flash kitkat bios from this and (just follow the instructor):
http://forum.xda-developers.com/attachment.php?attachmentid=3783701&stc=1&d=1465980824
after that just flash any kitkat rom, good luck.

MohamedStar said:
If u able to go throw fastboot then try to flash kitkat bios from this and (just follow the instructor):
http://forum.xda-developers.com/attachment.php?attachmentid=3783701&stc=1&d=1465980824
after that just flash any kitkat rom, good luck.
Click to expand...
Click to collapse
Dear MohamedStar
Thanks a lot for attaching the link above, you saved me from an boot failure efi hard drive issue. Thanks a gain

samehhakim said:
Dear MohamedStar
Thanks a lot for attaching the link above, you saved me from an boot failure efi hard drive issue. Thanks a gain
Click to expand...
Click to collapse
I'm glad it helped :good:

Thank you so much man for the replys Really
MohamedStar said:
If u able to go throw fastboot then try to flash kitkat bios from this and (just follow the instructor):
http://forum.xda-developers.com/attachment.php?attachmentid=3783701&stc=1&d=1465980824
after that just flash any kitkat rom, good luck.
Click to expand...
Click to collapse
I did the following and theoretically it should work perfectly but it still comes up with this https://gyazo.com/33d795031aeda6a8710af55da541651f
I don't understand ??? phone flash tool says it is in DNX mode this says its not!!???

QuietLife said:
If u able to go throw fastboot then try to flash kitkat bios from this and (just follow the instructor):
http://forum.xda-developers.com/attachment.php?attachmentid=3783701&stc=1&d=1465980824
after that just flash any kitkat rom, good luck.
Click to expand...
Click to collapse
i plugged my lenovo yoga tab 2 1050L in fastboot starting, then select 'c' to continue in the tool, but the program is stucked in "Sending files for booting in fastboot mode" and while waiting the screen in my tablet just shut down and nothing happened. Intel Flash Tool just turn on the device but can't detect it.

Help me , Im stuck on the boot ( cant access the recovery , just a white usb logo)

Guys, my zen5 stucking now, last night i just delete the /system chrome, and remove it with the new one app from /data (this is Link2sd stuff)
and i intergrate to system app (that chrome).
at the morning, i was trying to open my chrome, but error, so i restart my phone.
and... the problem is appear..
my screen is stuck (until right now) on the boot
i tried to re-flash with same ROM (OTA) by ADB , but not succeeded because i forgot to turn on my USB Debugging.
i tried to access Recovery mode, but there's only a dead android with a red triangle. (sometimes changing to USB White logo)
oh ya, the one thing that i can access is Fastboot only
What can I do ?

http://forum.xda-developers.com/zenfone-5/help/bootlooped-bricked-returning-to-stock-t3358662
see the above article,it might help you...
i dont think that usb debugging will create any problem coz in the above tutorial we are using fastboot commands rather than adb commands..
try it and reply..

[email protected] said:
http://forum.xda-developers.com/zenfone-5/help/bootlooped-bricked-returning-to-stock-t3358662
see the above article,it might help you...
i dont think that usb debugging will create any problem coz in the above tutorial we are using fastboot commands rather than adb commands..
try it and reply..
Click to expand...
Click to collapse
My lastest Rom is Lollipop ( i still keep the rom on my PC, so i use it rather than the kitkat)
and i guess.. now Im stuck at the step number 8.
fastboot flash recovery recovery.img
fastboot reboot
Click to expand...
Click to collapse
Here is the Screenshots
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
and the phone keep booting on the screen.. any solution ?
now also cannot access the fast boot by power + Volume up....

Donuttt said:
My lastest Rom is Lollipop ( i still keep the rom on my PC, so i use it rather than the kitkat)
and i guess.. now Im stuck at the step number 8.
Here is the Screenshots
and the phone keep booting on the screen.. any solution ?
now also cannot access the fast boot by power + Volume up....
Click to expand...
Click to collapse
THERE WAS A REASON WHY TOLD YOU TO FLASH KITKAT.................
force switch of phone and try booting by power and vol up key.....and give me a video of what u are seeing.........
WHO TOLD YOU TO FLASH BOOT.IMG??????????????
SEE THE FIRST STEP YOU TYPED :fastboot flash fastboot BOOT.IMG
it should had been fastboot flash fastboot fastboot.img
YOU SHOULD HAVE READ THE POST CAREFULLY!!!!!!!!!!!!
LAST RESORT IS THIS==http://www.asus.com/zentalk/forum.php?mod=viewthread&tid=33800
---------- Post added at 09:27 AM ---------- Previous post was at 08:28 AM ----------
Also see this===http://forum.xda-developers.com/zenfone-5/help/zenfone-5-a500cg-zenfone-6-a600cg-t3354645

[email protected] said:
THERE WAS A REASON WHY TOLD YOU TO FLASH KITKAT.................
force switch of phone and try booting by power and vol up key.....and give me a video of what u are seeing.........
WHO TOLD YOU TO FLASH BOOT.IMG??????????????
SEE THE FIRST STEP YOU TYPED :fastboot flash fastboot BOOT.IMG
it should had been fastboot flash fastboot fastboot.img
YOU SHOULD HAVE READ THE POST CAREFULLY!!!!!!!!!!!!
LAST RESORT IS THIS==http://www.asus.com/zentalk/forum.php?mod=viewthread&tid=33800
---------- Post added at 09:27 AM ---------- Previous post was at 08:28 AM ----------
Also see this===http://forum.xda-developers.com/zenfone-5/help/zenfone-5-a500cg-zenfone-6-a600cg-t3354645
Click to expand...
Click to collapse
well.. that's all my assumed... i thought i could use the lolli's version...
why im use boot.img ? because there's no fastboot.img when i entered that one.. just "error" , so I (again) assumed that "ohh maybe you missed type there"
my phone now unable to access the Power + Vol UP it will automatically booting screen.. , just the Power + Vol Down. but its image is a dead android with a triangle sign..
i already read that
http://www.asus.com/zentalk/forum.php?mod=viewthread&tid=33800
Click to expand...
Click to collapse
but I'am a bit confuse about the steps there...

Donuttt said:
well.. that's all my assumed... i thought i could use the lolli's version...
why im use boot.img ? because there's no fastboot.img when i entered that one.. just "error" , so I (again) assumed that "ohh maybe you missed type there"
my phone now unable to access the Power + Vol UP it will automatically booting screen.. , just the Power + Vol Down. but its image is a dead android with a triangle sign..
i already read that
but I'am a bit confuse about the steps there...
Click to expand...
Click to collapse
i told you that earlier......" there is a reason why i used kitkat" ,.,,,,,thats coz lollipop has droidboot.img and kitkat has fastboot.img.
if u had used kitkat on extracting it will be having fastboot.img
well unfortunately ,ur phone is hard bricked,the zentalk website i gave you is the only way...other than that you can send a message to dgadhela(see cm13 for zf5),,he is developer of the cm13 rom and some days back i read one of his post where he told how to solve no bootloader issue,i'm unable to find that post.....

I think i broke my Redmi

I bought my first redmi ever that is used phone and the previous owner said "its stuck on Mi logo after updating SU"
I tested the device first with these conditions
1. plugged to charger and its charge properly (led is on)
2. cannot go to recovery or power on (had to use deep flash cable to get into fastboot)
3. used deep flash cable, Quacomm shown and installed properly
4. Flashed the image. its says success but i accidentaly look at most bottom window. its says "flash_all_lock.bat"
5. unplugged the cable tried to turn on, it doesnt work
help me .. did i miss something here?
EDIT:
1. plugged to laptop, it says usb malfunctioned unlike before
2 is it normal if i get into fastboot using deep flash the screen show nothing?

1. Deep flash cable is to open the edl mode (not fastboot) and yes the screen is black in edl (download mode)
2. Make a clean flash and try it with qfil
3. You can find videos on youtube how you can fix redmi 4 prime hard bricks (complete guides)

Danoz88 said:
1. Deep flash cable is to open the edl mode (not fastboot) and yes the screen is black in edl (download mode)
2. Make a clean flash and try it with qfil
3. You can find videos on youtube how you can fix redmi 4 prime hard bricks (complete guides)
Click to expand...
Click to collapse
ok new problem, i plug the deep flash cable and it says hardware malfunctioned repeatedly
this one scared me and the device cannot charge
i'm thinking about test point method but i have to wait ordered small torx driver on monday

UPDATE:
After using test point. nothing changed except the device ID number is weird
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

How is it displayed in fastboot mode? Deepflashcable also doesn't worked for me because I read that on the newer rom's the edl mode is blocked so no chance with dfc anymore (thanks xiaomi...). It only reboots if I tried everything (commands,dfc,file..).
I had to flash an older version first via fastboot mode. After this I was able to reboot into edl mode with 0 problems. And I never tried the test point methode, not the right tools.

cant goto recovery, cant go to fastboot, test point tested 2nd time and its work.. flash success
but the screen still blank.
if i plug my usb cable to laptop its onlt shows MTP and green led light

I Know How To Fix This...
First Go to miui Fastboot page. Read the instructions and do as said till decompressed the file. Then Just connect your Phone while in Fastboot mode and enable adb and fastboot driver by double clicking on both respective bat files on your pc. Then Just Double click on [flash_all_except_data_storage.bat]. Your phone will reset and restart. If any problems contact me at [email protected] .
---------- Post added at 04:29 AM ---------- Previous post was at 04:23 AM ----------
rs168 said:
I bought my first redmi ever that is used phone and the previous owner said "its stuck on Mi logo after updating SU"
I tested the device first with these conditions
1. plugged to charger and its charge properly (led is on)
2. cannot go to recovery or power on (had to use deep flash cable to get into fastboot)
3. used deep flash cable, Quacomm shown and installed properly
4. Flashed the image. its says success but i accidentaly look at most bottom window. its says "flash_all_lock.bat"
5. unplugged the cable tried to turn on, it doesnt work
help me .. did i miss something here?
EDIT:
1. plugged to laptop, it says usb malfunctioned unlike before
2 is it normal if i get into fastboot using deep flash the screen show nothing?
Click to expand...
Click to collapse
First Go to miui Fastboot page. Read the instructions and do as said till decompressed the file. Then Just connect your Phone while in Fastboot mode and enable adb and fastboot driver by double clicking on both respective bat files on your pc. Then Just Double click on [flash_all_except_data_storage.bat]. Your phone will reset and restart. If any problems contact me at [email protected] .

amangupta711 said:
First Go to miui Fastboot page. Read the instructions and do as said till decompressed the file. Then Just connect your Phone while in Fastboot mode and enable adb and fastboot driver by double clicking on both respective bat files on your pc. Then Just Double click on [flash_all_except_data_storage.bat]. Your phone will reset and restart. If any problems contact me at [email protected] .
Click to expand...
Click to collapse
nope, cannot go to fastboot or recovery
flash succeed with test point method but the screen went blank after tried to power on the device
EDIT: forgot to mention, flashed with global stable, china stable , china developer.. the result still the same

Try this!!!
rs168 said:
nope, cannot go to fastboot or recovery
flash succeed with test point method but the screen went blank after tried to power on the device
EDIT: forgot to mention, flashed with global stable, china stable , china developer.. the result still the same
Click to expand...
Click to collapse
Hold power and vol down button for 20 sec.

amangupta711 said:
Hold power and vol down button for 20 sec.
Click to expand...
Click to collapse
it has been said.. nothing

Cannot enter in recovery mode after Asus Zenpad 10 Z300 entered in boot loop...help.

Hello members,
I have an old Asus Zenpad 10 Z300C that entered in a boot loop a few days ago.
I'm trying to boot in recovery mode so I can do a factory reset on it but I can't...
The procedures should be like these:
1. Power off your phone.
2. Once the device is off, press and hold the Volume Down + Power button together for a few seconds.
3. Release the keys as soon as you see the Asus logo and wait for few seconds.
4. Now, your phone should boot into Recovery Mode.
The only I can do is to boot in fastboot mode by pressing Volume Up + Power button.
Can anyone give me some tip about what could be the problem?
Thanks in advance.
Cheers!

kelsinni said:
Hello members,
I have an old Asus Zenpad 10 Z300C that entered in a boot loop a few days ago.
I'm trying to boot in recovery mode so I can do a factory reset on it but I can't...
The procedures should be like these:
1. Power off your phone.
2. Once the device is off, press and hold the Volume Down + Power button together for a few seconds.
3. Release the keys as soon as you see the Asus logo and wait for few seconds.
4. Now, your phone should boot into Recovery Mode.
The only I can do is to boot in fastboot mode by pressing Volume Up + Power button.
Can anyone give me some tip about what could be the problem?
Thanks in advance.
Cheers!
Click to expand...
Click to collapse
Hi, i have just Root m'y Asus z300 and saw this thread with fastboot recovery : https://forum.xda-developers.com/zenpad-10/help/how-to-root-asus-zenpad-10-z300c-t3214802/page15
Perhaps should help you...
Good Luck.
Btf

billythefly said:
Hi, i have just Root m'y Asus z300 and saw this thread with fastboot recovery : https://forum.xda-developers.com/zenpad-10/help/how-to-root-asus-zenpad-10-z300c-t3214802/page15
Perhaps should help you...
Good Luck.
Btf
Click to expand...
Click to collapse
Hi billytheply, thanks for your reply.
You mean follow all the steps mentioned on page 15 posted by @tassos_chry?
Thanks again

kelsinni said:
Hi billytheply, thanks for your reply.
You mean follow all the steps mentioned on page 15 posted by @tassos_chry?
Thanks again
Click to expand...
Click to collapse
Hi,
I mean there are perhaps something you can try on these thread. Read all the thread and check if someone succeed.
I do not have try to unbrick my z300. So i cannot Say if something Work.
Good Luck
Btf

billythefly said:
Hi,
I mean there are perhaps something you can try on these thread. Read all the thread and check if someone succeed.
I do not have try to unbrick my z300. So i cannot Say if something Work.
Good Luck
Btf
Click to expand...
Click to collapse
I have already read. Despite all my tries to enter in recovery mode on the tablet, I just can enter in fastboot mode by pressing Vol up + Power buttons
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
But the problem is that after i have installed adb+fastboot in my PC, i cannot found my tablet when i type the command "fastboot devices"
I have also tried to install "intel flash tool" (because this model has an atom cpu) and tried to flash the costom ROM for this model but then i get an error when the software was trying to get the serial number of the tablet...
Does anyone knows what can be the problem?
Thanks again

kelsinni said:
I have already read. Despite all my tries to enter in recovery mode on the tablet, I just can enter in fastboot mode by pressing Vol up + Power buttons
But the problem is that after i have installed adb+fastboot in my PC, i cannot found my tablet when i type the command "fastboot devices"
I have also tried to install "intel flash tool" (because this model has an atom cpu) and tried to flash the costom ROM for this model but then i get an error when the software was trying to get the serial number of the tablet...
Does anyone knows what can be the problem?
Thanks again
Click to expand...
Click to collapse
Hi, i don't succeed at the first try to install adb driver manually.
You must find Asus adb driver in the thread and force manual instal ( manually update adb in Windows paramèters or desinstall et manually install).
I succeed with fastboot command After install manually the specific Asus driver.
I tried Many times before and think it was not possible.
Btf

Snapdragon S20 G9810 - No Download mode, but Fastboot instead?!

Hi,
This morning I wanted to factory reset the phone and flash the latest version, but to my surprise I do not have the Download mode anymore, but I have the standard fastboot screen, wtf ?
EDIT : using "adb reboot download" worked. "adb reboot bootloader" goes fastboot and "adb reboot fastboot" goes into a reboot.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

this is normal now.. s20 devices have dynamic partitions so they implemented fastboot for using gsi n such

elliwigy said:
this is normal now.. s20 devices have dynamic partitions so they implemented fastboot for using gsi n such
Click to expand...
Click to collapse
It all changed during an update tbh. One day I could adb reboot bootloader, and land on the download mode, and now I just get fastboot.

Paradoxxx said:
It all changed during an update tbh. One day I could adb reboot bootloader, and land on the download mode, and now I just get fastboot.
Click to expand...
Click to collapse
what firmware are you on exactly?

I have a similar issue.. i get stuck at Entering Fastboot mode. After updating to latest firmware ATG4 from Australia via ODIN. Phone CSC is from Panama. I can boot to system just fine but not Download mode.

fourqui said:
I have a similar issue.. i get stuck at Entering Fastboot mode. After updating to latest firmware ATG4 from Australia via ODIN. Phone CSC is from Panama. I can boot to system just fine but not Download mode.
Click to expand...
Click to collapse
Power the phone off then with the cable plugged into the phone, keep volume button pressed and plug the other end of the cable into PC or Laptop.

west2cool said:
Power the phone off then with the cable plugged into the phone, keep volume button pressed and plug the other end of the cable into PC or Laptop.
Click to expand...
Click to collapse
Tried all key combinations. still no luck.

fourqui said:
Tried all key combinations. still no luck.
Click to expand...
Click to collapse
Mate clearly you not doing it properly. Ensure you phone is powered off then plug the USB-C into to it. Next, with the volume button depressed plug the said other end of the cable into a laptop/PC. The phone should then power up with a blue screen, press the volume up.

west2cool said:
Mate clearly you not doing it properly. Ensure you phone is powered off then plug the USB-C into to it. Next, with the volume button depressed plug the said other end of the cable into a laptop/PC. The phone should then power up with a blue screen, press the volume up.
Click to expand...
Click to collapse
Ok I got it working.. I think what you meant to say was Ensure you phone is powered off then plug the USB-C into to it. Next, with the volume UP and DOWN buttons pressed, plug the said other end of the cable into a laptop/PC. The phone should then power up with a blue screen, press the volume up

elliwigy said:
what firmware are you on exactly?
Click to expand...
Click to collapse
ATFD with ATFF baseband right now. I had whatever previous version it was before.