Q&A for [GUIDE] How to install CloudyG2 3.1 (D802) + MOD
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [GUIDE] How to install CloudyG2 3.1 (D802) + MOD. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
Soo...
I got a bit confused. If I come from the G4 Rom by Cheloz should I flash only the Cloudy rom or I need the debload patch too?
Thanks
taiki3ro said:
I got a bit confused. If I come from the G4 Rom by Cheloz should I flash only the Cloudy rom or I need the debload patch too?
Thanks
Click to expand...
Click to collapse
Debloat is MOD .Doesn't patch. You should flash rom only if doesn't want to use mod.
Sent from my LG-H818
Thanks a lot
I realized that i might need to reflash cloudy rom. You are the man, now its easy.
Thanks a dozen!
the patch did not work
i'm using d802 and I got bootloop when install cloudyG3 from Lollipop. Then I go back to kitkat then follow the instruction. However the bootloop is still here. I don't know what happen, maybe because I installed the D802T Auto Rec file?
sjeunhanz said:
i'm using d802 and I got bootloop when install cloudyG3 from Lollipop. Then I go back to kitkat then follow the instruction. However the bootloop is still here. I don't know what happen, maybe because I installed the D802T Auto Rec file?
Click to expand...
Click to collapse
Sure. I have to correctly install custom recovery that is my recommend. I comfirm 100% If you follow by my instruction it working
Sent from my LG-D802 using Tapatalk
I have kdz to 5.0 and download your twrp version and do exactly the instruction and it is still not working. I don't know where I missed
ohh crumbs.
I can't install cloudyg2 3.1 because my screen is broken. I can use a mouse with an otg cable to control TWRP but as soon as I begin installation it goes to a fancy ui that doesn't support my mouse pointer. If I click it only opens the 3 dot menu. Can't use hardware keys either. Gutted.
i am using optimus g3 kitKAt on d802
I CAN USE THIS METHOD TO INSTALL CLOUDY G2 3.1??
AND THE V2.8.5.1 OF TWRP IS OK??
PLZ HELP ME ??
Just to make sure - can I install your mod after using CloudyG2 for some days? Will it simple remove some apps?
Is the list of debloated apps similar to your own ROM? Just came from Kra-Pow-Moo-Sab but have to admit I prefer Cloudys ROM
Hai somboons,
In video, you use KITKAT.
My device is G2 16GB with lolipop 5.0.2. I update it via LG PC suite (not yet rooted)
If i want to install cloudy 3, what step should I do? Can I use in page 1?
In page one, I use "Coming from kitkat / Lollipop ASOP " or "Coming from Lollipop (Stock Custom ROM)"
sorry so many ask. I am newbie in this topic
Thanks in advence
Coming from CG2 2.2
Dear somboons,
Currently i'm using cloudyg2 2.2 in my G2, that i believe still Kitkat. Based on my understanding, even it's not aosp, i still can use your method (flash the patch) to upgrade to CG2 3.1, right?
LS980
i have a problem that i get a blank black screen on booting, do you have any suggestions?
Suggestions
I have install cloudyG2 3.1.
IMHO,
For next update, maybe the NAVIGATIONAL / NOTIFICATION BAR (upside) can make bigger. IMHO, it's too small
bar for HOME TOUCH BUTTON make bigger because it's too small to.
And the volume is so small. maybe you can make it louder for next update.
Can't wait for the next update
Thanks
---------- Post added at 09:59 AM ---------- Previous post was at 09:56 AM ----------
AguzBudiarta said:
i have a problem that i get a blank black screen on booting, do you have any suggestions?
Click to expand...
Click to collapse
I have that problem too. Maybe it is called bootlop CMIIW
I take the step http://forum.xda-developers.com/showthread.php?t=2687768 but your LG will back to 4.2.2 JB.
It's okay, more important, you can use your device again
Noobquestion:
Sorry i dont understand. I have official Lollipop Rom for LG G2. Do i have to use method 1 (Coming from kitkat / Lollipop ASOP) or method 2 (Coming from Lollipop (Stock Custom ROM) ) ?
JKDO said:
Sorry i dont understand. I have official Lollipop Rom for LG G2. Do i have to use method 1 (Coming from kitkat / Lollipop ASOP) or method 2 (Coming from Lollipop (Stock Custom ROM) ) ?
Click to expand...
Click to collapse
I'm from lollipop ROM official too..
use method 1 (kitkat / lollipop ASOP) but I suggest root with one-click root. My device can't be rooted with towelroot.
Help.
I tried using your method to install CloudyG2 v3.1 coming from CloudyG2 v2.2 (KITKAT).
Yes, I'm on D802 - International Version currently.
Problem I'm facing: I followed your exact step-by-step tutorial in your first post.
After a successful rom install, I click reboot into system but after a few seconds the LED flashes with the LG logo then it goes blank and the LG logo re-appears and I get booted into TWRP again.
I went back to KitKat with my nandroid backup in TWRP which I had luckily made.
What I exactly did:
[Please note I was on TWRP v2.8.5.1 before flashing the TWRP bump.]
1. Flashed the TWRP Bump (GO TO LP V1.1 droidth.zip)
2. Rebooted into recovery.
3. Wipe - Dalvik Cache, Cache, Data, System.
4. Flashed CloudyG3v3.1.zip
5. Rebooted system.
Then, I get rebooted into TWRP after a few seconds.
I hope you can help me as soon as possible, somboons.
Regards,
SpaceXTheClockMaster.
Stuck at loading Screen
Hi Somboons, I have a stock rooted kitkat and follow your steps in the post. But unfortunately it got stuck at the loading screen. Is there any other alternatives? Thanks
Zip error occur
Hi guys. i have followed steps but when flashing rom in twrp, an error message has shown that E:zip file error occur. What can i do? i couldnt figure out to solve problem
done every thing but it go to fastboot mood and don't want to reboot
i done every thing in the how to install cloudyg2 3.1 to step 4. but now every thing is gone the phone went dark and its go to Fastboot mode. how can i deal with this issue
Hi, im know this is a noob question. I searched forum and many pl have booting issues or even bricked one.
Please clarify
EDIT: Maybe MODERATOR could do some sticky thread about this and jumping beetween roms? It would be helpfull, thanks.
Phone: 802
ROM: now Stock based 5.0.2 SRKG 2 3-0.0, day before official CM 12.1 build x.1021
TWRP 2.8.6.1
I want to go back to install 4.4.x, MIUI or Cloudy 2.2. I downloaded D802 PATCH DROIDTH RETURN 4.4 as sugested by many of you - so i need only to go to TWRP, flash this, reboot to recovery, flash 4.4.x Cloudy and that's it? How to recognize on whitch bootloader I sit on?
Please help me, i don't recognize difference beetween KK and LP bootloader's, bootstacks etc.
Hi, i have the samsung galaxy s4 SGH-I337M jfltecan running android 5.0.1 lolipop. I want to install Xposed framework on my phone. I tried once before and got stuck in an annoying bootloop I also want to upgrade to a marshmallow based rom. Is there any way i can upgrade to 6.0, because i cant find any CM13 or anything that supports my device. If yes, instructions?
For Xposed framework, (If i can get that marshmallow OS) how can I install Xposed for marshmallow if there is a way to get marshmallow on my phone. If not, how can I install Xposed on 5.0.1 on my phone without getting bootlooped. I've heard a lot about having to DEODEX my stock ROM or something, which I dont quite understand.
I know it's a lot to ask, so thanks for any future help!
For a MM custom ROM, you may need to alter the updater script in order to install the ROM.
For CM, look for the jflte ROMs.
http://wiki.cyanogenmod.org/w/Jfltecan_Info
Xposed for MM:
Flash 1.
Install 2.
And if you want to get rid of Xposed flash 3.
Voi-la
Hello everyone
I have lg g2 verizon SV980
i have lolipop 5.0.2 and want to install CM12.1
i dont have rooted or something. i dont have TWRP too
i dont know how to install TWRP and than CM12.1 + gapps. can anyone help me? i need full tutorial
1.root
2. install lastest TWRP
4. install CM12.1 + Gapps [ LAST ]
dream555 said:
Hello everyone
I have lg g2 verizon SV980
i have lolipop 5.0.2 and want to install CM12.1
i dont have rooted or something. i dont have TWRP too
i dont know how to install TWRP and than CM12.1 + gapps. can anyone help me? i need full tutorial
1.root
2. install lastest TWRP
4. install CM12.1 + Gapps [ LAST ]
Click to expand...
Click to collapse
http://forum.xda-developers.com/verizon-g2/development/tool-freedom-tool-vs980-39a-twrp-t3053134
go this thread.. this may help u.
http://forum.xda-developers.com/lg-g3/general/guide-root-lg-firmwares-kitkat-lollipop-t3056951
also try this easy way to root with LG one click root.
Yeah,wrong thread
@dream555
Thread moved. Please post in the right section
Thank you. I rooted my lg g2 by one click root utility on 5.0.2 and installed cm12.1 now phone is rooted and can i unroot it?
Hello! I recently fixed my G2 screen. So now I want to upgrade its ROM. It is still on Cloudy g2 2.2 ( KITKAT 4.4.2). I wanted to upgrade to any nougat build. My phone version is F320L(korean variant). Can someone help me? Thanks in advance!
albannotosska said:
Hello! I recently fixed my G2 screen. So now I want to upgrade its ROM. It is still on Cloudy g2 2.2 ( KITKAT 4.4.2). I wanted to upgrade to any nougat build. My phone version is F320L(korean variant). Can someone help me? Thanks in advance!
Click to expand...
Click to collapse
Nearly every rom-thread contains a how-to. Check the different threads right her.
I know. But because I am in kitkat I wanted to know if I need to flash official lollipop first
So I decided to flash CM14.1 from CM13.0 today.
Here what I'm doing:
from CM 13;
Full Wipe
Flash g2 bootstacks https://forum.xda-developers.com/lg-g2/development/boot-g2-hybrid-bootstacks-t3183219
Flash ROM http://www.kimcloud.kr/lg/LG G2/cm14.1/
Flash Gapps OpenGapps
Flash Kernel Lambda Infinito BETA 9 for the LG G2 (Nougat)
Wipe data and cache
Reboot to system & make other thing in setting (SDCard not working)
Reboot to TWRP
Flash POLYMORPH to make SDCard working
Reboot to System
Done.