Database Users

Micromax Canvas Knight A350 Stock ROM OFFICIAL KITKAT

Thread Removed

>-MKG-< said:
Here is the Micromax Canvas Knight A350 Official Stock Firmware/Rom KITKAT :
LINK : https://drive.google.com/uc?id=0B9cSshs70JG0bjRyTWVCRU5LZ00
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Key Features
OS : Android Jelly bean 4.4.2
Screen Size : 12.7cms(5)
Camera Resolution : 16 MP AF (3456*4608) REAR, 8 MP(2448*3264) FF Front
Chip set : MT6592T
Processor : 2GHz Octacore
Battery Capacity : 2350mAh
Connectivity Options : Bluetooth 4.0/USB/Wi-Fi
Drivers:
https://www.adrive.com/public/uVCr85/Mobistel_Cynus_T1_Drivers_x86.exe
X64 Drivers : https://www.adrive.com/public/5mMCQJ/Micromax_A350_Drivers_x64.exe
https://www.adrive.com/public/TWKhBN/driver9401.rar
How to Flash :?
You can use https://www.adrive.com/public/tyrfC7/SP_Flash_Tool_v5.1348.00.rar
A. Install USB driver
B. Switch off the mobile.
The maximum downloading speed can be up to 921600bit/s when using USB-Serial cable.
The driver needs to be installed before using the USB cable.
1. computer eject hardware installation instruction and choose following item and then click’’next step’’.
2. click ‘’browser’’ and choose the driver saved path’’ USB VCOM-Driver’’ and then click confirm and next step".
Choose usb driver
3. USB driver is now installing.
4. Open software upgrading platform’’ SP_Flash_Tool_v5.1343.01
5. Click” Download Agent”，choose right MTK*ALLInOne*DA.bin file
6. Click Scatter/loading. Choose right MTXXXX_Android_scatter.txt file.
7. Click Download then connect the smartphone（keep close），would show yellow color processing bar. Eventually, show “download ok”. Upgrade finished.
Here is a Tutorial on how to use SP Flash Tool by DR_MOOSAVI : http://forum.xda-developers.com/show....php?t=1982587
And as always :
Use this at Your own Peril. I will not take any responsibility on whatever may happen with your Canvas Knight.
Click to expand...
Click to collapse
Why are you making a simple looking process too hard.
The simple process is to....
1.) Install the drivers. (make sure you keep your phone disconnected while installing from executable file)
2.) Start SP Flash tool and locate the scatter file. (Do not connect phone.)
3.) Select download only in droop down and click download. (Do not connect phone.)
4.) Switch off your phone. Make sure you switch it off completely as it will vibrate strongly when it will go off. (Do not connect phone.)
5.) Now finally it is the time to connect your phone. Connect you phone now
6.) You will see the process starting to download the flash to the phone.
7.) Wait for the process to finish and then start your phone.
Note: This process works best with x86 versions of windows as the drivers for the x64 versions do not detect this phone.
If possible use the tutorial on Windows 7 x86 only.
I have tested the kikat rom on this phone.
The only benefit of the rom was that it improved the camera quality. But this rom made the phone very slow. On 4.2.2 the Antutu score was 32520 while on Kikat the same score felt down to 23252.
The UI was very slow to use. So i switched back to 4.2.2 Stock.

Canvas Knight Kitkat CWM Recovery TWRP Recovery
Root in kitkat
Download links
1.) Recovery Image CWM
https://dl.dropboxusercontent.com/u/45270941/A350/recovery.img
2.) Recovery Image TWRP
http://goo.gl/K8Qcua
3.) Kitkat Rom download
http://goo.gl/Cp5zqR
4.) SP Flash Tool
https://dl.dropboxusercontent.com/u/45270941/A350/SP_Flash_Tool_v5.1348.00.rar
See the video to Update the Kitkat on your Knight. After that Go To CWM recovery and flash the Super SU zip and the phone will be rooted.
Press all three button all together to go to the Recovery mode and then press Volume UP+ to get the recovery.
5.) Super SU Zip download Link
http://goo.gl/lDKVFm
Enjoy the video and Reply back for more support or any problem.

Many thanks dear!!!!
rakesh.aggarwal said:
Canvas Knight Kitkat CWM Recovery TWRP Recovery
Root in kitkat
Download links
1.) Recovery Image CWM
https://dl.dropboxusercontent.com/u/45270941/A350/recovery.img
2.) Recovery Image TWRP
http://goo.gl/K8Qcua
3.) Kitkat Rom download
http://goo.gl/Cp5zqR
4.) SP Flash Tool
https://dl.dropboxusercontent.com/u/45270941/A350/SP_Flash_Tool_v5.1348.00.rar
See the video to Update the Kitkat on your Knight. After that Go To CWM recovery and flash the Super SU zip and the phone will be rooted.
Press all three button all together to go to the Recovery mode and then press Volume UP+ to get the recovery.
5.) Super SU Zip download Link
http://goo.gl/lDKVFm
Enjoy the video and Reply back for more support or any problem.
Click to expand...
Click to collapse
Many many thanks for the new updates!!!!

Please Hit thanks button if you like my stuff
Sent from my Micromax A350 using XDA Free mobile app

Please hit thanks as this motivate us to discover more
Sent from my Micromax A350 using XDA Free mobile app

Praful Pradhan said:
Many many thanks for the new updates!!!!
Click to expand...
Click to collapse
Thanks for watching
Sent from my Micromax A350 using XDA Premium HD app

MIUI Jelly Bean for Knight A350
Guys there is a Good News for everyone that the MIUI has been ported for Canvas Knight A350 and this is working fine with my phone.
http://tinyurl.com/MIUI4Knight
Procedure:
1. Make sure you have Jellybean Installed on the device. If not then install the JB on the device.
2. If you have installed JB just now then start the device and go through the setup.
3. Make sure you have CWM based recovery. If you do then go to the CWM recovery and
i. Wipe Cache​ii. Wipe Dalvik Cache​iii. Wipe DATA/Factory Reset​4. Flash the MIUI rom and then restart the phone.
If you have Any problems then please reply here on the thread. I am using the MIUI for a long time on Knight and I am very happy from the results. I will be more then happy to help you if you find any problems.
Hit Thanks if you find this helpful.

Flashable TWRP Images w/ Materialized Themes

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
____
____
More Colors in download link
Hello!
The following provides info, instructions, download links, and credits
INFO
FIle info - Based on 3.0.2-2 official. So it supports both lollipop and marshamallow.
Why This Version?
This TWRP theme will stay even after a wipe or reset, and is more stable to use.
TWRP - Team Win Recovery Project, is an open source, community project. It is a custom recovery used for installing custom software on your device.
Instructions
First of all, please note that you can brick and totally destroy your device, if you do not follow these instructions correctly. And you will be solely responsible for the damage.
Option 1 - If you already have TWRP installed
1. Download Materialized_TWRP.img - Download Link below
2. Boot into TWRP
3. Go to Install
4. Select Install Image
5. Go to location of Material_TWRP.img and tap on it.
6. Choose Recovery [IMPORTANT]
7. Swipe and Reboot TWRP
8. Enjoy!
Option 2 - If you don't already have TWRP
1. Download Materialized_TWRP.img - Download Link below
2. Get Minimal ADB & Fastboot from here.
3. Install it!
4. Copy the Materialized_TWRP.img to ADB & Fastboot folder
5. Make sure your tablet is unlocked and that you have Fastboot drivers.
6. Poweroff tablet
7. Boot into bootloader by holding the volume down button and tapping the power button once while still holding the volume button.
8. Now open ABD and Fastboot folder, and right click while holding the shift button. This will show the option "Open Command Windows here"
9. Plug in your tablet using a wire.
10. In the command window type "fastboot flash recovery Materialized_TWRP.img" without the quotations.
11. Once done, choose recovery mode from the menu in tablet.
12. Enjoy!
Download Link
Material Light
Play
Changelog
1.4 - Now uses theme v4
1.3 - Added Option "Use accent color for navbar" for Play Theme
1.2 - Added Material Light Theme
1.1 - Removed Change Splash and Change Theme from theme settings
1.0 - Initial Release
Credits
TeamWin - For the TWRP
z31s1g - For the beautiful theme
osm0sis - For Android Image Kitchen
if I forgot you please forgive me and PM me

Great can't wait to download and installed as soon as I get home will do and tested.
Sent from my SM-G935F using XDA-Developers mobile app

Earlier 3.x versions of TWRP had some touch issues on the Shield. Is this fixed now?

undrwater said:
Earlier 3.x versions of TWRP had some touch issues on the Shield. Is this fixed now?
Click to expand...
Click to collapse
Yes! Since this is based on a official TWRP (3.0.2-2) it works. It also works on marshmallow without any touch problems.

I just downloaded the file and try to flash it with two 3.0.2-2 and I did as the instructions said, install; install image, location of material TWRP img choose recovery, swipe and reboot and then I get thrown in to download mode phone will not boot in to recovery nor system I got to Odin flash recovery to get back to system. I don't know if I'm doing something wrong please let me know I'll love to try this.
Sent from my SM-G935F using XDA-Developers mobile app
---------- Post added at 03:17 AM ---------- Previous post was at 03:16 AM ----------
velocajigas said:
I just downloaded the file and try to flash it with twrp 3.0.2-2 and I did as the instructions said, install; install image, location of material TWRP img choose recovery, swipe and reboot and then I get thrown in to download mode phone will not boot in to recovery nor system I got to Odin flash recovery to get back to system. I don't know if I'm doing something wrong please let me know I'll love to try this.
Sent from my SM-G935F using XDA-Developers mobile app
Click to expand...
Click to collapse
Sent from my SM-G935F using XDA-Developers mobile app
---------- Post added at 03:25 AM ---------- Previous post was at 03:17 AM ----------
Guys I'm really sorry because I didn't read the title off the post did not realize it was for a Nvidia shield tablet I have a galaxy s5 thank God nothing worse happen, still a great work.
Sent from my SM-G935F using XDA-Developers mobile app

Some feedback would be appreciated!

Flashed. Looks good and works well.
One critique from my limited use: Add more contrast to the "swipe to unlock" when the screen times out. It was hard to identify the slider as it is pretty well hidden by the background.

undrwater said:
Flashed. Looks good and works well.
One critique from my limited use: Add more contrast to the "swipe to unlock" when the screen times out. It was hard to identify the slider as it is pretty well hidden by the background.
Click to expand...
Click to collapse
Thanks for the Feedback! I'll try to do what I can about this. :good:
You can also disable timeout in settings, if you don't like that

undrwater said:
Add more contrast to the "swipe to unlock" when the screen times out.
Click to expand...
Click to collapse
Which slider are you talking about, the install, backup, restore, advanced, file manager, wipe, or default

The unlock slider when the screen times out

Stay Tuned! an updates coming within a few days

Cant access them the new colours?

skooter32 said:
Cant access them the new colours?
Click to expand...
Click to collapse
You can't download them or they don't work?

Abbas_11 said:
You can't download them or they don't work?
Click to expand...
Click to collapse
Can't download

skooter32 said:
Can't download
Click to expand...
Click to collapse
Download the attached zip file, it includes a document with pics on how to download.
I'm pretty sure you have some other problem, but still

Abbas_11 said:
Download the attached zip file, it includes a document with pics on how to download.
I'm pretty sure you have some other problem, but still
Click to expand...
Click to collapse
No need to be smart bud

So, is the problem fixed or no? If not then I can create alternate link

HELP!!!!!
Im trying to install the xposed sdk23 v86 and i even tried the v80 that worked before but since i updated to 4.2 im finally adding all my mods and stuff and i havent done that since 4.0 update but anyways both packages while installing the zip file in twrp i get
UPDATER PROCESS ENDED WITH ERROR 1
Can someone help me?

Are you using "arm"

Thank you!!! Very nice work!

Thread closed

Install CM14 for OnePlus X (The Unofficial)
** How to Install TWRP for the 3.1.0 version you installed Oxygen.
B1: Starting Fastboot mode by turning off the power on. Then hold down + to the source.
Step 2: Install the driver and connect to the computer (HD drivers installed on the network to find it)
B3: Run cmd (run -> cmd) command fastboot boot attachments and enter this download Mod edit link removed
B4: boot into TWRP Self.
** The Stock 2.2.2 ROM you are using the network attempt to open up the OEM and then down Flashfy unbootloader install TWRP on CM ROMs directly or similar 13 and then into TWRP always offline.
** Note: Back up your data before doing us avoid errors arising restore offline.
** Download ROM CM 14: Mod edit link removed
** Link Download Grapps:Mod edit link removed
** Conducted into TWRP and wipe data, cache partitioning, Dalvik Cache. Flash ROM + Grapps and restart.
This is an experiment with me what errors arise not responsible. For those you love to dabble and discourage those you do not know and do not understand anything. People are already getting a bit bored Android does not dabble to dabble like new. : D
Path: Mod edit link removed
Vietnamses : Mod edit link removed

downloading, will report back soon.

Cam on
Thanks much

Post some screenshots.

failed to flash twrp ox 3.1 (https://www.fshare.vn/file/8AH9KRVS4URW). I tried flash it using twrp 3.0.2.0, but failed too

Well, this is interesting.. The step-by-step guide is a bit confusing though. I will download and try the 'ol good method of flashing ROM, gapps and supersu. Hope it works!

namquang93 said:
failed to flash twrp ox 3.1 (https://www.fshare.vn/file/8AH9KRVS4URW). I tried flash it using twrp 3.0.2.0, but failed too
Click to expand...
Click to collapse
can u mirror it? litle bit confusing
Sent from my ONE E1003 using XDA-Developers mobile app

be_are said:
can u mirror it? litle bit confusing
Sent from my ONE E1003 using XDA-Developers mobile app
Click to expand...
Click to collapse
here you go: https://drive.google.com/file/d/0B_Km0FbYnea1aDdIaTEydElhUkk/view?usp=sharing

twrp has not made it to 3 ox you have to use a downgrade to get a fresh start using unbrick method, (keep flashable backup via flashify) get twrp installed with the new (old) boot loader, flash cm14+ext. and you are done.
if you had cm13 or the likes, please confirm if you CAN upgrade to 14 before ox people start trying to install without knowing if it even has android 6 (last update i saw on the branch was from june 7 so idk)
teamwin does not have twrp for the ox 3 on oneplus x yet (on their releases anyway) so you have to follow some other process to downgrade to a twrp'able os (and a backup) before trying yo install this
if i see any info from people who have been able to update (and if it has android 7) i'll try to make a video on the process (in white, Texan english)

Please remove this page.

namquang93 said:
failed to flash twrp ox 3.1 (https://www.fshare.vn/file/8AH9KRVS4URW). I tried flash it using twrp 3.0.2.0, but failed too
Click to expand...
Click to collapse
Did you try boot into it:
> fastboot boot twrp_for_ox_3.1.0.img
Seems like the guide says you have to boot into it, not flash it.

ksigit said:
Did you try boot into it:
> fastboot boot twrp_for_ox_3.1.0.img
Seems like the guide says you have to boot into it, not flash it.
Click to expand...
Click to collapse
You're right. I tried fastboot boot twrp_for_ox_3.1.0.img instead of fastboot flash recovery twrp_for_ox_3.1.0.img and it booted into twrp_for_ox_3.1.0. But it still return an error when flash CM14, the same of twrp 3.0.2.0.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

namquang93 said:
You're right. I tried fastboot boot twrp_for_ox_3.1.0.img instead of fastboot flash recovery twrp_for_ox_3.1.0.img and it booted into twrp_for_ox_3.1.0. But it still return an error when flash CM14, the same of twrp 3.0.2.0.
Click to expand...
Click to collapse
Looks like a successful install to me. Could you provide twrp logs?

With whose permission did you post this build here ? Don't you think there was a reason that even after a complete build of CM14 it was still not posted to the forums ?
I am asking you, as politely as possible, to remove the links and this fake procedure, when N is ready, it will be shared, you might find phony builds or legit but non working ones on the interweebz, that doesn't mean it gives you the right to share it just because you think its cool, because its not.
Take it down.
EDIT: Sure, if you build yourself and want to share it then you're more than welcome.

And then they will cry if things are broken !! Take it down folk !
Sent from my ONE E1003 using XDA-Developers mobile app

This Build was just a test build, what made u think that i will not post it here on xda if the rom booted? We, the team are working to make it work but yeah dont post the builds from afh here, will update u all for sure when its done. I think it was my mistake to not to make that build private. -_-

It flashes successfully but doesn't boot, goes back into recovery. Still, great work.

congrats for succesfull starter build
hats off !!!!! to you guys ([/B]developers off this rom) :good:

Flashed with/without gapps. Doesn't boot - goes back 2 recovery

foster095 said:
Flashed with/without gapps. Doesn't boot - goes back 2 recovery
Click to expand...
Click to collapse
Kindly refer to the developer's post, POST #16

[Recoveries]TWRP Recovery For Meizu M2 Mini

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
TWRP is an open source, community project. TWRP development is done by roughly 4 people at this point. We also have a large support community with many people who are willing to answer questions and help people with their devices either through our IRC channel or on forums like xda-developers.
Team Win was originally formed to work on porting WiMAX to CM7 for the HTC EVO 4G. After our work on the EVO 4G we wanted to work on a project that would work on more devices than just the EVO 4G and we settled on working on a recovery. Today TWRP is the leading custom recovery for Android phones.
A custom recovery is used for installing custom software on your device. This custom software can include smaller modifications like rooting your device or even replacing the firmware of the device with a completely custom "ROM" like OmniROM
Requirements
Root+Bootloader Unlocked
Flashing Instructions
After Unlocking Bootloader (If you dont know how to do it then go here)
[url]https://forum.xda-developers.com/meizu-m2-mini/how-to/guide-unlock-bootloaderinstall-twrp-t3390799[/URL]
Enter In fastboot.Then type.
"fastboot flash recovery recovery.img"
wait a minute turn off the phone. and enter recovery (Power + vol up until vibration)you'll Be in TWRP
Download Links
Old Recovery Version 2.8
[url]https://drive.google.com/open?id=0Bz6Fq2POoJTlMXd3YzJhTnUxeVU[/URL]
Mid Recovery 3.10 Latest
[url]https://drive.google.com/open?id=0Bz6Fq2POoJTlYnpCaXhSOUxjX0E[/URL]
New Recovery 3.1.1
[url]https://drive.google.com/file/d/0Bz6Fq2POoJTlRjh4ZkppWUJ4Qm8/view?usp=drivesdk[/URL]
Latest Recovery 3.2.1
[url]https://drive.google.com/file/d/1ftYtD2Tm0MdKBv_ZtVQHGJEcCuflb6Oe/view?usp=drivesdk[/URL]
Don't Forget To Press Thanks if you like it :good: :good:
Regards~
Murtaza Piplod

what's news bro?

ADIB27 said:
what's news bro?
Click to expand...
Click to collapse
updated with latest features of the latest recovery released by TWRP read changelogs at there TWRP site

heelo there,
my meizu m2 now keep rebooting and enter the twrp recovery.
even i hold the power button, it still cannot totally shutdown the phone.
any solution?
please help me.

maxisgsm said:
heelo there,
my meizu m2 now keep rebooting and enter the twrp recovery.
even i hold the power button, it still cannot totally shutdown the phone.
any solution?
please help me.
Click to expand...
Click to collapse
Try clear dalvik and cache.

adarshm4you said:
Try clear dalvik and cache.
Click to expand...
Click to collapse
the problem is after the phone reboot, it enter twrp menu, dan go to format menu then reboot again ......

maxisgsm said:
the problem is after the phone reboot, it enter twrp menu, dan go to format menu then reboot again ......
Click to expand...
Click to collapse
I think there will be some mess in installed os reflash it after taking a backup.

adarshm4you said:
I think there will be some mess in installed os reflash it after taking a backup.
Click to expand...
Click to collapse
my phone hang while i do a format storage.

maxisgsm said:
my phone hang while i do a format storage.
Click to expand...
Click to collapse
Go twrp recovery and do advance wipe and flash os then.Connect to pc and copy files to memory card and then.Flash it from there since your hang issue will not affect installing.It will solve all problems.Always keep backups before doing anything.

adarshm4you said:
Go twrp recovery and do advance wipe and flash os then.Connect to pc and copy files to memory card and then.Flash it from there since your hang issue will not affect installing.It will solve all problems.Always keep backups before doing anything.
Click to expand...
Click to collapse
every time the phone boot into twrp, it only go back to last state and keep fail then reboot...... it will cycle until battery die. i cannot go anywhere in twrp .....
now i at fastboot state, when i try to flash stock rom, it gave me the error
G:\adbFire>fastboot flash update update_8.zip
sending 'update' (1115283 KB)...
OKAY [ 88.153s]
writing 'update'...
FAILED (remote: partition table doesn't exist)
finished. total time: 88.237s

Your partition got messed by installing custom rom.This problem is uncommon.I cant find good solution for m2 in xda or any forums.Brother just bricked your phone.These cases occur when wrong kernal flash,flashing radio etc.I found this problem only in one plus.
Check these before doing anything in adb
Properly detects the device to avoid errors
Detect if bootloader is locked and temporary unlock it if that is the case.If it temporarly locked again,got to fastboot and unlock it as you know the process.
Try Perform this:
Flashing twrp recovery.img.If no error comes flashing custom or
Twrp is unable to create new partitions...Then
Fastboot boot recovery.img (of stock flyme)
fastboot flash recovery boot.img
Going to stock rom is only nice way i think so.
Boot.img can be found inside rom zip of flyme.Go for flyme first.
It isn't the best method to flash a different rom, but as the cmd implies its perfectly fine for flashing an update of the same rom.Since phone is prime important now.Go back custom then.
Some helpful links linkshttps://forum.xda-developers.com/meizu-m2-mini/how-to/install-stock-recovery-meizu-m2-mini-t3433916
Or wait for any heads to reply:silly:

adarshm4you said:
Your partition got messed by installing custom rom.This problem is uncommon.I cant find good solution for m2 in xda or any forums.Brother just bricked your phone.These cases occur when wrong kernal flash,flashing radio etc.I found this problem only in one plus.
Check these before doing anything in adb
Properly detects the device to avoid errors
Detect if bootloader is locked and temporary unlock it if that is the case.If it temporarly locked again,got to fastboot and unlock it as you know the process.
Try Perform this:
Flashing twrp recovery.img.If no error comes flashing custom or
Twrp is unable to create new partitions...Then
Fastboot boot recovery.img (of stock flyme)
fastboot flash recovery boot.img
Going to stock rom is only nice way i think so.
Boot.img can be found inside rom zip of flyme.Go for flyme first.
It isn't the best method to flash a different rom, but as the cmd implies its perfectly fine for flashing an update of the same rom.Since phone is prime important now.Go back custom then.
Some helpful links linkshttps://forum.xda-developers.com/meizu-m2-mini/how-to/install-stock-recovery-meizu-m2-mini-t3433916
Or wait for any heads to reply:silly:
Click to expand...
Click to collapse
adb cannot detect my devices ..... if i not mistake, last time i unlcock my OnePlus one without any problem, and adb can detect my phone,
now cannot detect ....

@murtaza1326
TWRP 3.2.1.0 is out!
Update the post

rushiranpise said:
@murtaza1326
TWRP 3.2.1.0 is out!
Update the post
Click to expand...
Click to collapse
post updated new latest 3.2.1 TWRP is added @Dinolek TWRP is alread there in his post so I don't think i should repost it here ??
Regards~

how to recovery install meizu m2 mini flyme 6.2.0.0g

thanks sir.. i wanna install this twrp

Pretty good!

[TOOL][OP8] TOOL ALL IN ONE (Drivers|Unlock|TWRP|Factory Image|Stock Recovery)

This is the OnePlus 8's TOOL ALL IN ONE Discussion Thread more info and download go to the Original Thread
TOOL ALL IN ONE
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
ADVANCED OPTIONS
FUNCTIONS
Install Drivers
Install Drivers
Unlock Bootloader
Lock Bootloader (use carefully)
Flash TWRP Recovery
Flash Stock Recovery
Flash Stock Factory Image
Automatic ROOT
Install APKs
Uninstall APKs
Take a Screenshot
Take a Screen Reocrd
Flash Partitions
Erase All Data (This function can decrypt the phone)
Reboot Phone
Update the Tool to latest version
Update Adb and Fastboot to latest version
Set Adb and Fastboot priviliges in system wide
Install Zip directly from PC (Required TWRP on phone)(These functions work perfectly on my pc but i have perfect adb drivers on my pc and perfect TWRP on my phone)
Flash Fastboot ROM
Delete downloaded files
ADB File Manager
DEVICE LIST
If you want you can send a request to add a new device here:
New Device Request Form
Device List
DOWNLOAD
Original Thread
DONATE LINK
If you want to support the project please consider making a donation, thanks.
​

Great job, but I never use it. I really need to learn a lot of things. Thank you so much.

@mauronofrio does this work for the T-Mobile variant?

Thank you so much for this, a must have!!

Does this work with oneplus 8 from t mobile?

I was able to ROOT Oneplus 5 with this tool, can this be used to ROOT Oneplus 8 as easy ?

Will this work for the T-Mobile variant? I'm on 10.5.8

did anyone try this on the T-Mobile oneplus 8?

After unlocking the bootloader (Oneplus 8; no branding) I flashed TWRP 3.4.0 and rooted using Magisk 20.4. After this the CAMERA app is not opening anymore though. And the AUTHY app is simply showing a blank screen. What should I do to fix this?
I don't necessarily need to keep the phone rooted, I only needed to do in order to restore some apps data with Titanium Backup. Once that is done if I unroot (not sure how just yet) will the camera and other apps start working perhaps?
Nevermind. After having tested various things I ended up rebooting the phone and that fixed it. thinking about it it started not working after I enabled the option "Magisk Hide". I guess the option requires a reboot even thought it's not mentioned.

networx2002 said:
did anyone try this on the T-Mobile oneplus 8?
Click to expand...
Click to collapse
No luck. I tried last night.
Edit: That was without the unlock token from oneplus. Still waiting on that.

Thats what i figured damn TMobile.
rekman said:
No luck. I tried last night.
Edit: That was without the unlock token from oneplus. Still waiting on that.
Click to expand...
Click to collapse

Droidman61 said:
Thats what i figured damn TMobile.
Click to expand...
Click to collapse
I tried successfully today.
1. SIM unlock
2. OnePlus unlock code
3. Unlock bootloader
4. Use this tool.
5. Profit
First thing I installed was adaway

Just waiting on my OnePlus code.

mauronofrio said:
This is the OnePlus 8's TOOL ALL IN ONE Discussion Thread more info and download go to the Original Thread
TOOL ALL IN ONE
ADVANCED OPTIONS
FUNCTIONS
Install Drivers
Install Drivers
Unlock Bootloader
Lock Bootloader (use carefully)
Flash TWRP Recovery
Flash Stock Recovery
Flash Stock Factory Image
Automatic ROOT
Install APKs
Uninstall APKs
Take a Screenshot
Take a Screen Reocrd
Flash Partitions
Erase All Data (This function can decrypt the phone)
Reboot Phone
Update the Tool to latest version
Update Adb and Fastboot to latest version
Set Adb and Fastboot priviliges in system wide
Install Zip directly from PC (Required TWRP on phone)(These functions work perfectly on my pc but i have perfect adb drivers on my pc and perfect TWRP on my phone)
Flash Fastboot ROM
Delete downloaded files
ADB File Manager
DEVICE LIST
If you want you can send a request to add a new device here:
New Device Request Form
Device List
DOWNLOAD
Original Thread
DONATE LINK
If you want to support the project please consider making a donation, thanks.
Click to expand...
Click to collapse
Awesome thanks for this!

hello this tool is worth to put the twrp in the oneplus 8? or better to use CMD?
Enviado desde mi IN2010 mediante Tapatalk

tyl3rmax said:
Awesome thanks for this!
Click to expand...
Click to collapse
Can this also install the international version on TMobile branded devices?

On the Device/Functions page https://toolaio.tk/devices-functions/, Oneplus 8 is listed as No on Stock Recovery but Yes on Stock Factory Image. Does this mean I can use this tool to "flash to stock" or no?