Wifi connection very slow on P8Lite Information - P8lite Q&A, Help & Troubleshooting

See tests here;
http://www.anandtech.com/show/9260/the-huawei-p8-review/5
WiFi Performance
Moving on to WiFi performance we address one of the most critical faults of the P8: Lack of 5GHz WiFi. There were already some raised eyebrows during the official announcement where we couldn't find any mention of 802.11ac in any of the spec sheets, and indeed, the device comes without support for the higher frequency bands.
This raises some big questions about Huawei's choice of RF back-end and what exactly is going on there. Connectivity itself is provided by a Broadcom BCM4334, which is quite an ancient chipset by today's standards, as we first saw its introduction in 2012. Broadcom advertises max PHY rates of up to 150Mbps and upper layer rates of up to 90Mbps - and 5GHz is definitely listed as one of its capabilities. This is the same chip used in the Honor 6 and Mate 7, which did have 5GHz capability. In the end only Huawei knows what kind of decision-making process warranted such a significant omission of an every-day important feature.
Possible fix i will try tonight:
https://linustechtips.com/main/topi...slow-wifi-speed-happens-with-one-router-only/

I changed my wifi from standby to always. Weird things started to happen..
Test1 = 8.5 DLL / 4 UL
Test2 = 2.4 DLL / 0.3 UL
Test3 = 8.4 DLL / 4 UL
In test2 i wasn't downloading anything what so ever.
On my tablet i have stable 70 DLL / 5 ULL in every test i do.

Damn this sucks! I was going to buy p8 lite, now I need to look somewhere else.

Still waiting for fix
m waiting for fix

ward0 said:
See tests here;
http://www.anandtech.com/show/9260/the-huawei-p8-review/5
WiFi Performance
Moving on to WiFi performance we address one of the most critical faults of the P8: Lack of 5GHz WiFi. There were already some raised eyebrows during the official announcement where we couldn't find any mention of 802.11ac in any of the spec sheets, and indeed, the device comes without support for the higher frequency bands.
This raises some big questions about Huawei's choice of RF back-end and what exactly is going on there. Connectivity itself is provided by a Broadcom BCM4334, which is quite an ancient chipset by today's standards, as we first saw its introduction in 2012. Broadcom advertises max PHY rates of up to 150Mbps and upper layer rates of up to 90Mbps - and 5GHz is definitely listed as one of its capabilities. This is the same chip used in the Honor 6 and Mate 7, which did have 5GHz capability. In the end only Huawei knows what kind of decision-making process warranted such a significant omission of an every-day important feature.
Possible fix i will try tonight:
https://linustechtips.com/main/topi...slow-wifi-speed-happens-with-one-router-only/
Click to expand...
Click to collapse
For some reason my Huawei p8 lite doesn't connect to wifi using n wifi network. Is it a software issue? I am sure that router is fine since other devices connect to it using n wifi

Suleiman01 said:
For some reason my Huawei p8 lite doesn't connect to wifi using n wifi network. Is it a software issue? I am sure that router is fine since other devices connect to it using n wifi
Click to expand...
Click to collapse
yes, i have same problem.

This solution only works if you do not switch to airplane mode.. The best I have found is getting kernel adiutor and changing tcp to reno instead of cubic.

Related

Full N mode

Hi!
Has anyone reached more than 65 Mbps? I tried many different options on my Asus RT-N66U, but I haven't got faster. When I connect to my WLAN, SGN shows only 65 Mbps, while router supports up to 450. If there is a way to get faster I would greatly appreciate to know how) I use 5GHz, WPA2-PSK network
Thanks in advance
Sent from my GT-N7000 using xda premium
Well, might as well respond to this.
Note is being advertised with 802.11N but it isn't exactly what you think. Usually if you see WiFi N you automatically think it's 150 or 300 or 450 in speed.
How they reach those theoretical maximum speeds is MIMO and higher bandwidth. (Multiple-Input Multiple-Output)
Now look at wifi routers or adapters. See a router with 150M? It has one antenna. See a router with 300M? It has two antennas. See a router with 450M? It has three antennas.
Now if you look at their specs you can see they support 20Mhz and 40Mhz bandwidth.
With single 20Mhz link the max you can reach on WiFi N is 72.2Mbps. With single 40Mhz link you can reach 150Mbps.
Now add another link and what happens? Possible speed doubles. Add another link and it triples compared to single.
See the chip/antenna in our phones (other phones as well) isn't simply capable of higher speeds.
The chip and antenna in our phone is only capable of single 20Mhz link. Add higher bandwidth -> more battery is drained. Add another link -> more battery is drained.
If I were you I'd take a quick look at the wiki page for IEEE 802.11 and read a little about the bandwidth, data rate and such. It's actually rather entertaining stuff.
Sent from my GT-N7000 using Tapatalk 2
My views coming from a network administrator's perspective.
What sort of Router are you using, what sort of files are you accessing / transferring.
just an example, do you understand there are various type of switches, Normal, Low Latency, Ultra low latency etc...
My point is there are many factors to consider before you can reach certain speed, N specify XX speed means it can reach that speed but criteria do matters.

Abysmal WiFi Performance after Android 4.3 Update

Hello all,
I'm not sure if this has been answered. If it's not in the proper forum, please move appropriately.
After updating from 4.2.2 to 4.3 (Stock android), my WiFi performance has gone down the tubes.
It was literally about 50mbps and it is now around 10mbps. The difference is night and day.
Anyone else seeing this?
Thanks,
cchhat01
Apparently,
Whatever they did, it only effects 5 GHz (802.11a/n) and not the 2.4 GHz (802.11b/g/n) bands.
Apparently I seem to have won the lottery because I don't use anything other than the 5 GHz band on my phone.
Just my luck,
Tried fresh install and update. Same result.
Phone flies with 2.4GHz wifi but throughput is about 15% on the 5GHz mode.
cchhat01
I am seeing the same thing. My DSL is 40Mbps down and I used to get 20-40ms pings but now when I run speed test on my N4 after 4.3, I now get 0.5-2Mbps and 100+ms pings. I tried a reboot and I still get the same thing. Might have to try a factory reset.
Sent from my Nexus 4 using xda app-developers app
JoeDaddy0710 said:
I am seeing the same thing. My DSL is 40Mbps down and I used to get 20-40ms pings but now when I run speed test on my N4 after 4.3, I now get 0.5-2Mbps and 100+ms pings. I tried a reboot and I still get the same thing. Might have to try a factory reset.
Sent from my Nexus 4 using xda app-developers app
Click to expand...
Click to collapse
Not sure if we're experiencing the same problem. Do you have access to a 2.4/5GHz dual band router? If you have you tested speeds based on the different access points that correspond to the 2.4 and 5Ghz bands separately?
Here are my results:
5GHz: 11728 kbps down / 33493 kbps up
2.4GHz: 44368 kbps down / 63497 kbps up
Speeds are very consistently performing under 11mbps on 5GHz not sure what they changed here but it is safe to say that this is a kernel based change and not a baseband change. Hopefully this can be improved upon by our kernel devs.
Thanks,
cchhat01
Yes, I have an Asus RT-AC66U dual band router. I do notice a major slowdown on the 5 GHz but the 2.4GHz is decent. My ping is kind of high (100ms+) in both cases though. On one of my computers that is wired to the router I consistently get 20-30ms for a ping.
Here are results from a speed test this morning:
5GHz results are about 2.5Mbps down and 4Mbps up
2.4GHz results are about 20Mbps down and 4.5Mbps up
Looks like I will be sticking with 2.4GHz for a little while. Hope this can be resolved soon.
Thanks,
Joe
Thanks for the update and proving my theory.
If more people can join in and verify these results, we might bring it to the attention to the kernel devs, who might know where the problem lies. I am not so sure a kernel fix would be coming anytime soon from google.
cchhat01
I have an Asus RT-N66U and was having the same issues. I didn't think to change the bands but my wifi speeds were horrible, so much so that I just went back to CM 10.1.2 because I don't have issues on it. My wifi would be fast at first boot around 30 mbps but after time I would drop down to like 100 kbps. My nexus 7 (original) had no slow down whatsoever. I may try to switch the bands to 2.4 because I didn't think about that but I really don't want to wipe and reinstall android again at this point.
Well i can't even connect to 5ghz anymore...
Sent from my Nexus 4 using Tapatalk 4 Beta
imoumni said:
Well i can't even connect to 5ghz anymore...
Sent from my Nexus 4 using Tapatalk 4 Beta
Click to expand...
Click to collapse
That simply doesn't make sense.
Are you using Stock Android Kernel? I say kernel because WiFi accessibility/performance is based on the kernel. So if you are using the OTA update rom but then you flashed X-kernel, you need to bring that to the attention the kernel's developer.
Also, the other problem a lot of WiFi users experience is caused by the encryption method used while on WPA2 PSK.
The options are AES or TKIP. One of these won't work well with some phone's WiFi drivers and most of the time you can't pick and choose. If this is the case, try connecting to a router that has these options (OpenWrt firmware based routers gives you this option).
Hope this helps.
cchhat01
I'd like to point out that doing Internet speed tests to determine wifi speeds is a bit half baked.
To accurately measure your wifi throughput, you should be communicating with another device on your LAN.
cchhat01 said:
That simply doesn't make sense.
Are you using Stock Android Kernel? I say kernel because WiFi accessibility/performance is based on the kernel. So if you are using the OTA update rom but then you flashed X-kernel, you need to bring that to the attention the kernel's developer.
Also, the other problem a lot of WiFi users experience is caused by the encryption method used while on WPA2 PSK.
The options are AES or TKIP. One of these won't work well with some phone's WiFi drivers and most of the time you can't pick and choose. If this is the case, try connecting to a router that has these options (OpenWrt firmware based routers gives you this option).
Hope this helps.
cchhat01
Click to expand...
Click to collapse
I agree that it doesn't make sense, but let me give you the details. I am 100% stock non rooted. this 5ghz network was working perfectly until I upgraded using adb sideload of the stock image. There is nothing else different. I have even tried disabling security to no avail.
I have this issue but its the opposite. 5ghz works well and the 2.4ghz is slow.
The same happens with my Nexus 10 as well. Just not as severe as a drop off.
Before 4.3 both devices had the same speeds on both bands.
I have the belkin AC1200db router.
Sent from my Nexus 4 using Tapatalk 4 Beta
I got the same issues as you. My performance on both 2.4 and 5 GHz is abysmal. I can barely even connect to the 5 GHz channel. Both channels are giving me 2-3 Mbps max. I never used to have these problems.
Check out this Google forums thread:
https://www.google.ca/url?sa=t&sour...=7R4MuI37CiwhwWjYfuR8ig&bvm=bv.50165853,d.eWU
They're having the same problems.
Thing is, my new 2013 N7 runs flawlessly on the 5 GHz channel. 20 Mbps every time.
Sent from my Nexus 4 using XDA Premium HD app
Solutions Etcetera said:
I'd like to point out that doing Internet speed tests to determine wifi speeds is a bit half baked.
To accurately measure your wifi throughput, you should be communicating with another device on your LAN.
Click to expand...
Click to collapse
I agree about speedtests being done solely on the mobile phones are a moot point and half baked. However, I never implied that I rely solely on the data provided by my mobile phone. I have a couple of laptops and a desktop pc and all the devices (non-mobile phones) top out at the related 59 mbps speeds. My Nexus 4 always topped out at 50mpbs and I was really praising a device's ability to do so even in 20Mhz bandwidth (max data rates are 65mbps on the Nexus 4, meaning that i never connects at 802.11n speeds). However, post 4.3 upgrade (from 4.2.2 and also via a fresh install) left me questioning what went wrong with the 5 Ghz band. 2.4Ghz was working fine.
El Daddy said:
I have this issue but its the opposite. 5ghz works well and the 2.4ghz is slow.
The same happens with my Nexus 10 as well. Just not as severe as a drop off.
Before 4.3 both devices had the same speeds on both bands.
I have the belkin AC1200db router.
Sent from my Nexus 4 using Tapatalk 4 Beta
Click to expand...
Click to collapse
I can't say why this is happening on your nexus 4. It truly does bother me. Maybe something having to do with you method of upgrading to 4.3? Were you rooted before?
Also, the drivers are baked into the kernel. Nexus 4 and other devices will most likely use different drivers and hence the performance is bound to vary. My wife's Galaxy S3 doesn't come close to my Nexus 4 wifi speeds even though the S3 connects at 40Mhz bandwidth.
rickytenzer said:
I got the same issues as you. My performance on both 2.4 and 5 GHz is abysmal. I can barely even connect to the 5 GHz channel. Both channels are giving me 2-3 Mbps max. I never used to have these problems.
Check out this Google forums thread:
https://www.google.ca/url?sa=t&sour...=7R4MuI37CiwhwWjYfuR8ig&bvm=bv.50165853,d.eWU
They're having the same problems.
Thing is, my new 2013 N7 runs flawlessly on the 5 GHz channel. 20 Mbps every time.
Sent from my Nexus 4 using XDA Premium HD app
Click to expand...
Click to collapse
Again, different device, different Kernel and ultimately different wifi driver.
If I were you, I would also post my findings about your other devices on their appropriate forums.
Thanks,
cchhat01
Same problem. My router is only 2.4 GHz and it is set for G only. Before the upgrade to 4.3 I was consistently getting 20 Mbps average. After the upgrade to 4.3 I am now only getting 10 Mbps average. On the plus side, my data speed has increased 3 to 7 fold.
Having trouble as well. We have 75mb down with FIOS. We get that speed on our desktops and on our Nexus 10s. Our Nexus 4s, connected to the same exact router as the Nexus 10s, were getting 700 K down! I set wireless to 2.4Ghz only instead of Auto and was able to bump the speed to 14mb down. That at least is MUCH MUCH better, but it still annoys me I can't get our full speed on the phones. When I look at the wireless connection on Nexus 10 and Nexus 4, I see a big difference in reported link speed to the router. 130MB on the Nexus 10 and 24MB on the Nexus 4. I've pushed my understanding of the issue as far as I can. I'm stuck now - have no idea why there is such a huge difference.
Try different channels on your router. Some people are reporting success with that. Also, make sure your router firmware is up to date.
Sent from my Nexus 4 using Tapatalk 4
FYI, I've been experiencing the same problem on my Galaxy Nexus since updating to 4.3. My router is a Linksys EA4500 (one of the N900 models). It's a simultaneous dual band model. It's firmware is current. I have a different SSID for the 2.4 GHz band and the 5 GHz band. Wifi Analyzer shows absolutely no other nearby networks on the 5GHz band. The neighbors are only using 2.4 GHz.
The 2.4 GHz band has been fine for the most part; it's the 5 GHz that's giving me problems. For the 5 GHz band I've tried every combination of channel, width, wifi standard (N-only, A-only, auto). On some combination of settings I cannot connect to the 5 GHz band, even when it's found. With other combos, I can connect to 5 GHz, but speeds are a quarter to one half their usual. On rare occasions I'm able to get it up to normal fast speed, but then an hour later it's back to being slow again. Sometimes when the 5 GHz band is slow for a day or two, the 2.4 GHz band starts to slow down, too. On the phone I have turned off the wifi "always scanning" and "optimize" options.
Lately I've just kept the phone on 2.4 GHz only. I'm just about ready to force the phone back to 4.2.2.
GrillMouster said:
FYI, I've been experiencing the same problem on my Galaxy Nexus since updating to 4.3. My router is a Linksys EA4500 (one of the N900 models). It's a simultaneous dual band model. It's firmware is current. I have a different SSID for the 2.4 GHz band and the 5 GHz band. Wifi Analyzer shows absolutely no other nearby networks on the 5GHz band. The neighbors are only using 2.4 GHz.
The 2.4 GHz band has been fine for the most part; it's the 5 GHz that's giving me problems. For the 5 GHz band I've tried every combination of channel, width, wifi standard (N-only, A-only, auto). On some combination of settings I cannot connect to the 5 GHz band, even when it's found. With other combos, I can connect to 5 GHz, but speeds are a quarter to one half their usual. On rare occasions I'm able to get it up to normal fast speed, but then an hour later it's back to being slow again. Sometimes when the 5 GHz band is slow for a day or two, the 2.4 GHz band starts to slow down, too. On the phone I have turned off the wifi "always scanning" and "optimize" options.
Lately I've just kept the phone on 2.4 GHz only. I'm just about ready to force the phone back to 4.2.2.
Click to expand...
Click to collapse
I have started too experience the same problem on my Nexus 4 running 4.3. Everything was fine with 4.3 up until yesterday when I noticed my phone would no longer connect to 5GHz access points. I upgraded to 4.3 many weeks ago, so the issue did not begin right away.
I have seen this same problem on the Galaxy Nexus (multiple different ones) and the conclusion seemed to be some kind of hardware failure preventing the 5GHz wifi from working. Seeing the same issue reemerge on a completely different phone/platform is very concerning.
Let me ask you this, can you connect to your 5GHz wifi access point if your 1-5 meters away? I mean literately, stand next to the router and attempt to connect. I can get full speed 5GHz wifi this way on my Nexus 4 but walk away a few feet and the signal drops completely.
Can't connect at all on 5 GHz WiFi Cisco e2500
Sent from my Nexus 7 using Tapatalk 4

Maximum AC wifi link speed?

I've been searching for a while and i just cant seem to find the answer. I just upgraded from an AC 1200 to an AC 1900 router. My note 4's wifi link speed on the AC 1200 maxed out at 867 mb/s. on 5ghz which is the max for AC 1200.
Now with the new router it still only connects at 867mb/s and not the max link speed the new AC 1900 router should provide.
I know it dosent matter, has nothing to do with why i bought the router and is plenty fast enough... but it's bugging me.
I just want to know if the N4 tops out at 867mb/s? Has anyone gotten anything higher for a link speed?
thanks!!
I certainly haven't gotten anything higher than that with my RT-AC87 and my Note 4. Only topped out at 700-something Mbps while being in the same room as the router itself.
Usually, the bandwidth numbers on these routers are inflated for marketing reasons anyway. Sometimes they mash together the total theoretical bandwidth for the 2.4 GHz and 5 GHz bands, sometimes they assume you're using 3x3 clients (I'm pretty sure the Note 4 and most other smartphones and laptops are just 2x2), and sometimes they conveniently ignore the fact that Wi-Fi is an inherently half-duplex connection (transmit OR receive, not both, so your bandwidth's halved for bidirectional communication).
Your new router is probably only a dual band. Two channels of 433 Mbs. = 867Mbs. I have a Nighthawk Tri Band router which will combine 3 channels to allow 1.3Gbs. However I have no devices that support triband connections. My Surface Pro 3 and Samsung Tab S only connect at 867Mbs. Even the new Note 5 specs say Dual Band for the .AC radio spec. I haven't seen any new phones with a Triband spec yet.

S6 Lite 2.4 GHz Wi-Fi issue

After extensive troubleshooting with my ISP's highest level tech support (I escalated my issue to the highest level) and ultimately swapping my Arris XB6 router/modem with a brand new one with a different chipset, my S6 Lite attains atrocious 2.4 GHz speeds.
Before people lecture me on how I should be using 5 GHz only, the fact is I usually can't because of physical limitations such as concrete walls, congestion, and and distance. What's interesting is how when connected to 5 GHz, speeds are fantastic and mirror other devices including my laptops, mobile devices such as iPhone/iPads, and even a wired ethernet connection to the desktop.
However, things quickly go to **** when using 2.4 GHz. I exchanged my S6 Lite and it's still doing the same. I tested it out in another area using a different AP with a different ISP using only 2.4 GHz and I got the same result.
When using other devices including new or legacy devices, they all kick the S6 Lite's butt in terms of speed. While I can often only achieve 6 -10 Mbps with the Lite, I get close to 70 Mbps on other devices and even with an old Nexus 7 2013 I get close to 40 Mbps, but not with the Samsung - connected to 2.4 GHz.
Using Wi-Fi spectrum analyzers signal strength and speeds are all awesome. I have a signal of around -37 dBm when on either 20 or 40 MHz channel bandwidth. I tend to get slightly faster speeds on my Lite via 20 instead of 40 Mhz. Channels are manually selected as Auto gives the worst possible speeds.
As such, I have come to accept this is Wi-Fi is an issue with the Lite and an not a defect per se. It's engineered this way. My question is though, how and why? Does Samsung use two different radios or "network" cards on the motherboard? And if anything, shouldn't the 5 GHz spectrum suffer before the 2.4 GHz? From past experience using Android TV Boxes, my issues have always typically been when connected to 5 GHz.

Nintendo Switch WiFi Bandwidth much lower than hardware limit

I am looking for some techincal thoughts on this issue since the Nintendo community and support agents don't know enough hardware or software to help me find the root of the issue.
I have a V1 Nintendo Switch which appears to have a BCM4356XKUBG Broadcomm WiFi + Bluetooth IC inside that has a max theoretical data rate of 867 Mbps. However, despite having the maximum MTU, extremely low latency DNS servers specified, having the router's and the switch's antenna array less than 3 inches away from one another with line of sight, using an open channel on 5 GHz WifI (scanned it using Inssider)...I still cannot break 60 Mbps with a reliable 350 Mbps wireless signal confirmed by 3 devices at a similar distance.
Any thoughts or ideas? Is Nintendo possibly limiting the bandwidth in firmware?

Categories

Resources