I recently updated my Galaxy Note 4 (SM- N910G) to Android 6.0.1 and I started having issues with my fingerprint lock.
When I restart my device I'm forced to enter the backup password to unlock my device as the fingerprint lock won't work.
But the fingerprint lock works just fine for regular phone locking/unlocking after the device has booted up.
I factory restored my phone and re-registered my fingerprints but that didn't help.
What's wrong?
Sent from my SM-N910G using XDA-Developers mobile app
Have you tried doing a hard factory reset of your device but clear the cache in the hard factory reset menu first? That should fix your problem. If it doesn't then I would take your device to a Samsung Service Center.
This is normal behavior on MM (6.0+), because it would be possible to bypass the fingerprint installing a zip through recovery.
So it's not a flaw, it's a design premise to increase the security.
rvbeppler said:
So it's not a flaw, it's a design premise to increase the security.
Click to expand...
Click to collapse
I'm still not sure why people are missing this point. It even says that a password is needed because the device was rebooted, so why the confusion?
Sent from my SM-N910U using Tapatalk
EP2008 said:
I'm still not sure why people are missing this point. It even says that a password is needed because the device was rebooted, so why the confusion?
Sent from my SM-N910U using Tapatalk
Click to expand...
Click to collapse
No, it doesn't say "Password is needed because device was rebooted", it says " Unable to use fingerprint to unlock the device". I could unlock phone using my fingerprints when my phone was running on Lollipop. Don't know if it's a security measure or any problem in fingerprint sensor mechanism.
Sent from my SM-N910G using XDA-Developers mobile app
It is a security feature added to marshmallow. There is nothing wrong on your phone.
If you change your kernel this happend.
befor change kernel diasable fingerprint lock and change kernel then re enable it
JanMohammad said:
No, it doesn't say "Password is needed because device was rebooted", it says " Unable to use fingerprint to unlock the device". I could unlock phone using my fingerprints when my phone was running on Lollipop. Don't know if it's a security measure or any problem in fingerprint sensor mechanism.
Sent from my SM-N910G using XDA-Developers mobile app
Click to expand...
Click to collapse
Yes, it does.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sent from my SM-N910U using Tapatalk
Dear,
There is certain problem with 6.0.1 ,..even I'm getting the same problem... even in mute motion " Turning Device over " is not working..
plzz help
Did anyone notice that you can't use fingerprint to unlock the phone after reboot, but you CAN use it to change the password? It doesn't even ask for the old one.
I actually liked the fact that you can only use password after reboot, but this completely defies the added security. Is there any way to disable this?
Is there a fix or work around for this? It's driving me crazy. What good is a fingerprint reader if you have to type a password!!!
The dam thing reboots it's self way to often or I have to to get it to work. Really getting tired of buggy samsung products...
Oscar_6 said:
Did anyone notice that you can't use fingerprint to unlock the phone after reboot, but you CAN use it to change the password? It doesn't even ask for the old one.
I actually liked the fact that you can only use password after reboot, but this completely defies the added security. Is there any way to disable this?
Click to expand...
Click to collapse
It is asking for your fingerprint before you can change your password. The password cannot be changed by another person.
---------- Post added at 09:09 AM ---------- Previous post was at 09:05 AM ----------
jgoeke said:
Is there a fix or work around for this? It's driving me crazy. What good is a fingerprint reader if you have to type a password!!!
The dam thing reboots it's self way to often or I have to to get it to work. Really getting tired of buggy samsung products...
Click to expand...
Click to collapse
It is not a bug. It is an added security feature of marshmallow to stop another person to unlock your phone during reboot.
Seriously?
No one knows how to set it back to making FINGERPRINT the unlocking mechanism? It is SUPER ANNOYING to type in the (BACK UP!)password. Can I go to pattern lock at least after reboot? HELP!!!
there is an Xposed module that enables you to use your fingerprint after rebooting. It works. I've been using it on my Sprint Samsung Galaxy Note 4 on the latest software, PE2.
Theres no problem with ur device
I have it on my s5 and its the same on note 5 and all updated devices probably
Forced to use backup password after rebooting then u can use fingerprints
Sent from my Galaxy S5 using XDA Labs
richardjrdeal said:
there is an Xposed module that enables you to use your fingerprint after rebooting. It works. I've been using it on my Sprint Samsung Galaxy Note 4 on the latest software, PE2.
Click to expand...
Click to collapse
What is its name? I need it
Sent from my Galaxy S5 using XDA Labs
NHK said:
What is its name? I need it
Sent from my Galaxy S5 using XDA Labs
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=3411066
Sent from my SM-G900FD using Tapatalk
madpayne said:
http://forum.xda-developers.com/showthread.php?t=3411066
Click to expand...
Click to collapse
Thanks
EDIT: Thanks its woeking for me too
(T-Mobile Galaxy S5 (SM-G900T)
Sent from my Galaxy S5 using XDA Labs
my note edge goes to lock screen by it self and request password to open again, "Unable to use fingerprint to unlock the device"
how i can solve this problem??
1- reset factory 2-Flash new rom +Pit but the problem remained...
Please Help...
JanMohammad said:
I recently updated my Galaxy Note 4 (SM- N910G) to Android 6.0.1 and I started having issues with my fingerprint lock.
When I restart my device I'm forced to enter the backup password to unlock my device as the fingerprint lock won't work.
But the fingerprint lock works just fine for regular phone locking/unlocking after the device has booted up.
I factory restored my phone and re-registered my fingerprints but that didn't help.
What's wrong?
Sent from my SM-N910G using XDA-Developers mobile app
Click to expand...
Click to collapse
Nothing wrong your device its absolutely fine .actually this is new feature for security reasons in 6.0.1 marshmallow every time you reboot you must use backup password .same like iphone .not like lollipop and kitkat.
So even if someone cut your finger off to unlock they can't
If you want old feature to unlock by fingerprint when you reboot then you have to downgrade to 5.1.1 lollipop.
Related
This is a flashable zip that installs ONLY the face unlock for Android L. It is best to flash this after flashing a minimal gapps package (like banked apps). Tested on my Nexus 5 with Terminus.
Download Link
Files have been extracted from @drewwalton19216801 's file. Original gapps thread here.
Thanks man its very useful for me and works on Linearboost Lollipop ROM like a charm!!
is this supposed to show up where smart lock used to be?
Taken from LRX22C?
Works great, thanks!
fw3254 said:
is this supposed to show up where smart lock used to be?
Click to expand...
Click to collapse
This is like an add on. For some roms, smart lock only shows location and device lock. This one adds face there too. If you already have it you don't need this
Sent from my Nexus 5 using Tapatalk
gpvecchi said:
Taken from LRX22C?
Click to expand...
Click to collapse
Don't think so. I'll add it when I can
Sent from my Nexus 5 using Tapatalk
New face unlock is here, taken from android 5.0.2. If it doesn't work, reset the face unlock first and then turn it on again. Tested and working on Terminus
asdfasdfvful said:
New face unlock is here, taken from android 5.0.2. If it doesn't work, reset the face unlock first and then turn it on again. Tested and working on Terminus
Click to expand...
Click to collapse
Thanks. Will try flashing it later
Pls post screenshot Thanks
Awwal1st said:
Pls post screenshot Thanks
Click to expand...
Click to collapse
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Face unlock is on the bottom
Sent from my Nexus 5 using Tapatalk
It works with photo too
how it works.
Hi i installed it. Then i go to setting->security->
But no where i see face lock setting.
The only face lock setting is in smart lock-> trusted face but thats not working too.
[email protected] said:
Hi i installed it. Then i go to setting->security->
But no where i see face lock setting.
The only face lock setting is in smart lock-> trusted face but thats not working too.
Click to expand...
Click to collapse
Where it is depends on your Rom. Did you flash gapps? These are not stand alone, but are a complement for gapps like banked which doesn't come with it. Flash that first before flashing this. If it still doesn't work, then idk :/.
Sent from my Nexus 5 using Tapatalk
[email protected] said:
Hi i installed it. Then i go to setting->security->
But no where i see face lock setting.
The only face lock setting is in smart lock-> trusted face but thats not working too.
Click to expand...
Click to collapse
asdfasdfvful said:
Where it is depends on your Rom. Did you flash gapps? These are not stand alone, but are a complement for gapps like banked which doesn't come with it. Flash that first before flashing this. If it still doesn't work, then idk :/.
Sent from my Nexus 5 using Tapatalk
Click to expand...
Click to collapse
Remember that you have to set up a pin or pattern for it to work, maybe that's ypur problem.
AztekSoul said:
Remember that you have to set up a pin or pattern for it to work, maybe that's ypur problem.
Click to expand...
Click to collapse
I have pattern setup already...
[email protected] said:
I have pattern setup already...
Click to expand...
Click to collapse
What phone are you using and what Rom do you have? This is tested on terminus on the nexus 5. Gapps should technically he the same across any phone as long as it is lollipop, but maybe there are incompatibilities in some places. Make sure your front camera is working too before trying to set up a face unlock. Sometimes issues happen
Sent from my Nexus 5 using Tapatalk
asdfasdfvful said:
What phone are you using and what Rom do you have? This is tested on terminus on the nexus 5. Gapps should technically he the same across any phone as long as it is lollipop, but maybe there are incompatibilities in some places. Make sure your front camera is working too before trying to set up a face unlock. Sometimes issues happen
Sent from my Nexus 5 using Tapatalk
Click to expand...
Click to collapse
I have nexus 5. Rooted. Origanal rom only
[email protected] said:
I have nexus 5. Rooted. Origanal rom only
Click to expand...
Click to collapse
Hm. Not sure if stock roms have incompatibilities with gapps built for aosp. Sorry :/
Sent from my Nexus 5 using Tapatalk
asdfasdfvful said:
Hm. Not sure if stock roms have incompatibilities with gapps built for aosp. Sorry :/
Sent from my Nexus 5 using Tapatalk
Click to expand...
Click to collapse
Well my luck :/.
Thanks for your effort
I am trying to get the advanced calling working with root so I can make a phone call and use data at the same time. I am using echoe rom now and the only option i get in settings>advanced calling is "activate advanced calling" and even after a restart that does nothing. I am thinking there was too much Verizon bloat removed and it doesn't work anymore in this rom. Are any of you able to get this feature working? I've searched most the forums but i can't seem to find anything.
EDIT: Tried flashing this HD Calling fix https://www.androidfilehost.com/?fid=24588212152304773 it seems my advanced calling in settings has disappeared now and i still cant use data while on a call.
I'm running echoe rom and have it working but I've had advance calling active since my Galaxy Note 4 so maybe something there
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sent from my SM-G935V using Tapatalk
jolly_roger_hook said:
I'm running echoe rom and have it working but I've had advance calling active since my Galaxy Note 4 so maybe something there
Sent from my SM-G935V using Tapatalk
Click to expand...
Click to collapse
are you on version 1.2 or 1.41? I'm going to try a full wipe and install 1.41 then. Do you by chance know what install options you picked?
jolly_roger_hook said:
I'm running echoe rom and have it working but I've had advance calling active since my Galaxy Note 4 so maybe something there
Sent from my SM-G935V using Tapatalk
Click to expand...
Click to collapse
When I did a fresh flash it says "Unable to activate: Make sure you are using the latest version of My Verizon Mobile to activate Advanced Calling" Did you have to download My Verizon? I do still have my Note 4 I could try to activate it on there then switch the sim card back I guess.
I never use my Verizon personally it's on the device but I don't use it also Im using v 1.2 which is the only one on xda I selected normal option verizon as carrier ux grace apps s7 camera I only removed a few apps hal services and s heath all other I freeze with titanium did the full wipe
Sent from my SM-G935V using Tapatalk[/QUOTE]
Sent from my SM-G935V using Tapatalk
jolly_roger_hook said:
I never use my Verizon personally it's on the device but I don't use it also Im using v 1.2 which is the only one on xda I selected normal option verizon as carrier ux grace apps s7 camera I only removed a few apps hal services and s heath all other I freeze with titanium did the full wipe
Sent from my SM-G935V using Tapatalk
Click to expand...
Click to collapse
OK we are all the same there except the UX grace apps which I don't think matter? I attached my screens of my advanced call settings and activation process, install my verizon after that second screen to get to the third, then restarted after that last one and it does nothing, back where i started. I am going to try activating it in my Note 4 when I get home and maybe that will help. Thanks for the help so far, at least I know it can work on this rom now
jolly_roger_hook said:
I'm running echoe rom and have it working but I've had advance calling active since my Galaxy Note 4 so maybe something there
Sent from my SM-G935V using Tapatalk
Click to expand...
Click to collapse
are you able to use data while on a phone call? I got it working (because I went back to rooted U firmware but haven't installed echoe yet till I get this figured out) but i still dont have data available during a call.
Finally got it all working
Mibuix0r said:
Finally got it all working
Click to expand...
Click to collapse
What was your fix?
Outbreak444 said:
What was your fix?
Click to expand...
Click to collapse
Did a TIBU backup and then I wiped everything and started from scratch with the newest verzion firmware (G935VVRS4APH1_CL8875708_QB10880117_REV02_user_low_ ship_MULTI_CERT) from here.I still couldn't get it working so I started a chat with Verizon and resynced everything and we got it working after a bit.
Then I just went through the motions again, did everything in here to get the U firmware, root, and fixes. Verified advanced calling was still working then flashed Echoe and restored apps/data through TIBU.
Good deal forgot to mention I started from Ph1 myself probably should have said that
Sent from my SM-G935V using Tapatalk
Rogers has just pushed an Update - More than a Month after just about every other Canadian Carrier - We'll see if it includes the September Security Patch...
Edit: No September Security Patch - And it may not happen to you - But I had System UI has Stopped - Had to Boot into Stock Recovery and Factory Reset - Royal PITA!
Sent from my SM-G955W ??
I just updated my rogers phone as well and I'm having the same issue. So if I reboot my phone the system ui issue will happen again. is there a fix for this
Sent from my SM-G955W using Tapatalk
jazenf said:
I just updated my rogers phone as well and I'm having the same issue. So if I reboot my phone the system ui issue will happen again. is there a fix for this
Sent from my SM-G955W using Tapatalk
Click to expand...
Click to collapse
Yes - Power off your phone - Press - Power +Volume Up + Bixby Button to Reboot into Recovery - and Factory Reset - Wipe Caches - Reboot and Setup your phone all over again.
Sent from my SM-G955W ??
This was announced a few days ago in https://forum.xda-developers.com/galaxy-s8+/how-to/canadian-samsung-galaxy-s8-plus-t3581183
dakunclear said:
This was announced a few days ago in https://forum.xda-developers.com/galaxy-s8+/how-to/canadian-samsung-galaxy-s8-plus-t3581183
Click to expand...
Click to collapse
That's great - I didn't receive it until 09/28 (the update also wasn't available on sammobile.com until 09/28) - And the update resulted in "System UI has Stopped" on my device (apparently I'm not alone) - And the solution to the System UI issue is now posted
Sent from my SM-G955W ??
If anyone with Rogers is interested in their posted Update Schedule for various devices.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sent from my SM-G955W ??
shaggyskunk said:
That's great - I didn't receive it until 09/28 (the update also wasn't available on sammobile.com until 09/28) - And the update resulted in "System UI has Stopped" on my device (apparently I'm not alone) - And the solution to the System UI issue is now posted
Sent from my SM-G955W ??
Click to expand...
Click to collapse
where is it posted?
Sent from my SM-G955W using Tapatalk
jazenf said:
where is it posted?
Sent from my SM-G955W using Tapatalk
Click to expand...
Click to collapse
Are you asking about the Firmware from sammobile.com - or about the Firmware update from your Carrier?
Sent from my SM-G955W ??
shaggyskunk said:
Are you asking about the Firmware from sammobile.com - or about the Firmware update from your Carrier?
Sent from my SM-G955W ??
Click to expand...
Click to collapse
from the carrier..
Sent from my SM-G955W using Tapatalk
jazenf said:
from the carrier..
Sent from my SM-G955W using Tapatalk
Click to expand...
Click to collapse
The screen shot that I posted earlier was a reply to me from Rogers on Twitter... If that's what you mean.
You're the guy who had the System UI has Stopped... right?
Did you fix it by doing what I said was the solution?
Sent from my SM-G955W ??
shaggyskunk said:
The screen shot that I posted earlier was a reply to me from Rogers on Twitter... If that's what you mean.
You're the guy who had the System UI has Stopped... right?
Did you fix it by doing what I said was the solution?
Sent from my SM-G955W ??
Click to expand...
Click to collapse
I did all of that, but non of that worked for me. So, now I just make sure that my phone died mg die..Lol
Sent from my SM-G955W using Tapatalk
jazenf said:
I did all of that, but non of that worked for me. So, now I just make sure that my phone died mg die..Lol
Sent from my SM-G955W using Tapatalk
Click to expand...
Click to collapse
There's no reason why the Factory Reset shouldn't work - It resets everything except for the OTA Firmware update from the Carrier... I'm not sure what you mean by "... I just make sure that my phone died...."?
Sent from my SM-G955W ??
shaggyskunk said:
There's no reason why the Factory Reset shouldn't work - It resets everything except for the OTA Firmware update from the Carrier... I'm not sure what you mean by "... I just make sure that my phone died...."?
Sent from my SM-G955W ??
Click to expand...
Click to collapse
after I did the update (which came from the Carrie) I've been getting that error. then I rebooted my phone the factory reset my phone thinking it would fix the problem it didn't. Cause every time I turn my phone off an turn it back on That same error comes back. So what i need to do is do a roll back to the update I had before.
Sent from my SM-G955W using Tapatalk
jazenf said:
after I did the update (which came from the Carrie) I've been getting that error. then I rebooted my phone the factory reset my phone thinking it would fix the problem it didn't. Cause every time I turn my phone off an turn it back on That same error comes back. So what i need to do is do a roll back to the update I had before.
Sent from my SM-G955W using Tapatalk
Click to expand...
Click to collapse
No you don't - You need to Boot into the Stock Recovery - Volume key to select Factory Reset - Volume key to select Yes - Power key to Execute the Factory Reset - Volume key to select Wipe Caches - Power key to Execute - Volume key to Select Reboot.
Nothing that you changed from the time you got the phone will be left on your phone.
The Firmware version displayed in the screen shot below is working perfectly now.
Sent from my SM-G955W ??
shaggyskunk said:
No you don't - You need to Boot into the Stock Recovery - Volume key to select Factory Reset - Volume key to select Yes - Power key to Execute the Factory Reset - Volume key to select Wipe Caches - Power key to Execute - Volume key to Select Reboot.
Nothing that you changed from the time you got the phone will be left on your phone.
The Firmware version displayed in the screen shot below is working perfectly now.
View attachment 4288495
Sent from my SM-G955W ??
Click to expand...
Click to collapse
Lol.... all your telling me I did already..Lol. An that's great its working for you but it ain't working for me.. So I don't know what to tell you.
Sent from my SM-G955W using Tapatalk
jazenf said:
Lol.... all your telling me I did already..Lol. An that's great its working for you but it ain't working for me.. So I don't know what to tell you.
Sent from my SM-G955W using Tapatalk
Click to expand...
Click to collapse
Well I'm sure that you understand that I have no way of knowing how experienced you are - So I'm erring on the side of caution ?
You might want to call your Carrier's Tech support... There's no reason why you're continuing to get a System UI error.
Sent from my SM-G955W ??
shaggyskunk said:
Well I'm sure that you understand that I have no way of knowing how experienced you are - So I'm erring on the side of caution ?
You might want to call your Carrier's Tech support... There's no reason why you're continuing to get a System UI error.
Sent from my SM-G955W ??
Click to expand...
Click to collapse
well I do appreciate You taking the time to help me out, and I will contact them tomorrow. Thank dude.
Sent from my SM-G955W using Tapatalk
I want to unlock my Samsung s8+ from telus, non root if its possible.
jmak1117 said:
I want to unlock my Samsung s8+ from telus, non root if its possible.
Click to expand...
Click to collapse
Buy a code and unlock it then. Simple as that. And no there's no BL unlock that question has been asked a million times over
My s8 veision is g950f
and the csc is CHO/CHO/BRI
Yesterday i update s8 from 7.0 to 8.0 but after i found that my face recogniton is missing.
Anyone can help with this?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I'm pretty sure it's there (saw it before).
You cannot have it together with iris (I prefer the iris so far)
Sent from my SM-G950F using Tapatalk
pierg75 said:
I'm pretty sure it's there (saw it before).
You cannot have it together with iris (I prefer the iris so far)
Sent from my SM-G950F using Tapatalk
Click to expand...
Click to collapse
It is not there, and i wearing glasses so iris is not good for me.
https://ibb.co/je6NaH
https://ibb.co/fe8Dhx
https://ibb.co/khbNaH
It's in settings,lock screen and security and there you have face recognition (950f UK)
Sent from my SM-G950F using Tapatalk
pierg75 said:
It's in settings,lock screen and security and there you have face recognition (950f UK)
Sent from my SM-G950F using Tapatalk
Click to expand...
Click to collapse
I added the screenshot you can see there is nothing about face.
I have it... maybe Samsung didn't want it on that csc ?
Sent from my SM-G950F using Tapatalk
pierg75 said:
I have it... maybe Samsung didn't want it on that csc ?View attachment 4448256
Sent from my SM-G950F using Tapatalk
Click to expand...
Click to collapse
SAD
Has anyone managed to find a fix for this? I've got a couple of phones doing the same thing.
jibbgibb said:
Has anyone managed to find a fix for this? I've got a couple of phones doing the same thing.
Click to expand...
Click to collapse
I am finding the way to fix it. But seems no one has this issue. SAD.
q363389749 said:
I am finding the way to fix it. But seems no one has this issue. SAD.
Click to expand...
Click to collapse
I updated to oreo with the unlocked firmware on my note 8 so I'm on the non carrier version, I had face unlock until I installed bk package disabler, I had to remove Google and Samsung account and remove sim to give bk permission with adb and reboot with sim back in and setting up Google and Samsung account again, only disabled Samsung OTA updates and face recognition is now missing completely and was working fine before setting up bk package disabler pro, do you think it was from removing accounts or the bk package disabler? Very strange that it was there and working flawlessly before I removed accounts and sim to enable bk and now it's like it is completely gone from settings.
woodyjlw said:
I updated to oreo with the unlocked firmware on my note 8 so I'm on the non carrier version, I had face unlock until I installed bk package disabler, I had to remove Google and Samsung account and remove sim to give bk permission with adb and reboot with sim back in and setting up Google and Samsung account again, only disabled Samsung OTA updates and face recognition is now missing completely and was working fine before setting up bk package disabler pro, do you think it was from removing accounts or the bk package disabler? Very strange that it was there and working flawlessly before I removed accounts and sim to enable bk and now it's like it is completely gone from settings.
Click to expand...
Click to collapse
I am using package disabler pro, but before i did the oreo update i enable all the app.
q363389749 said:
I am using package disabler pro, but before i did the oreo update i enable all the app.
Click to expand...
Click to collapse
For me it was working and I had rebooted several times and still had face unlock. It was after bk setup that I lost it.
woodyjlw said:
For me it was working and I had rebooted several times and still had face unlock. It was after bk setup that I lost it.
Click to expand...
Click to collapse
Hmmm for me, after i finished update i totally lose the face unlock whatever what i try to do(remove account etc..)
q363389749 said:
Hmmm for me, after i finished update i totally lose the face unlock whatever what i try to do(remove account etc..)
Click to expand...
Click to collapse
If I do full factory reset on oreo I have face unlock back, have you tried that and set it up before bk?
woodyjlw said:
If I do full factory reset on oreo I have face unlock back, have you tried that and set it up before bk?
Click to expand...
Click to collapse
I have so many things in my phone, i do not want to do a full backup and restore. And some apps setting needs to set again which is annoying....
q363389749 said:
I have so many things in my phone, i do not want to do a full backup and restore. And some apps setting needs to set again which is annoying....
Click to expand...
Click to collapse
Yeah I get that. I'm researching bk to see if that's the problem
Problem solved after update to the latest package.
Hello,
my phone suddenly hang and then i restart my phone it become bootloop..
after that just restore to factory setting..OMG i was forgot my gmail password.. and most bad luck for me.. this gmail not linked to any phone number and backup mail... :crying:
just now stuck on verifying account
im trying to find some solution but nothing help me to solve it.
i just try to downgrade from 8.0 to 7 but failed
i just try using combination file android 7 but no luck at all
i just try to root but failed
i just try to install TWRP but failed
all of this failed because FRP LOCK : ON
can somebody help me to solve this problem????
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Did you try flashing the latest 7.0 firmware you can find? Too old ones will not work as the phone will reject it.
Note that SM-G935F and FD firmware are pretty much the same, so if you are intending to flash always flash SM-G935F firmware and not FD for better firmware options.
Otherwise you can take it to someone that does the FRP bypass or get it remotely done for a fee, there are websites out there that offer their services remotely for it. Not going to advertise businesses here.
Try a YouTube video like this on how to do it:
https://www.youtube.com/watch?v=RGIACjDdsp8
Fauzibest said:
Hello,
my phone suddenly hang and then i restart my phone it become bootloop..
after that just restore to factory setting..OMG i was forgot my gmail password.. and most bad luck for me.. this gmail not linked to any phone number and backup mail... :crying:
just now stuck on verifying account
im trying to find some solution but nothing help me to solve it.
i just try to downgrade from 8.0 to 7 but failed
i just try using combination file android 7 but no luck at all
i just try to root but failed
i just try to install TWRP but failed
all of this failed because FRP LOCK : ON
can somebody help me to solve this problem????
Click to expand...
Click to collapse
Hello, have you managed to solve this?
I have also similar problem
Samsung/hero21texx/hero2lte
8.0.0/R16NW/G935FXXU2EREM
Balkrish999 said:
Hello, have you managed to solve this?
I have also similar problem
Samsung/hero21texx/hero2lte
8.0.0/R16NW/G935FXXU2EREM
Click to expand...
Click to collapse
just now im using box to remove it.... done with box
Fauzibest said:
just now im using box to remove it.... done with box
Click to expand...
Click to collapse
Did you have version 8.0?
How do you do it with box? Can you please share tutorial you used and link's please
Thank you
Fauzibest said:
just now im using box to remove it.... done with box
Click to expand...
Click to collapse
can you please explain.
You need Z3X Samsung activated box + uart cabel... then combo + ufs frp and it schould work...
Hi, I solved the same problem with my SM-G935FD using Odin3 v3.13.1. As I had Oreo previously installed, I flashed the following Oreo files (downloaded from sammobile):
AP_G935FXXU2EREM_CL13438344_QB18291953_REV00_user_low_ship_meta.tar
BL_G935FXXU2EREM_CL13438344_QB18291953_REV00_user_low_ship.tar
CP_G935FXXU2ERD6_CP9567704_CL13438344_QB17934979_REV00_user_low_ship.tar
CSC_OJV_G935FOJV2ERE8_CL13439324_QB18100674_REV00_user_low_ship.tar
After flashing, phone was set to factory defaults, but fully functional again. Bye!
Hi,
After flashing, was the FRP lock removed automatically ?
or you can use the exe z3x box 29.1 it's on xda somewhere if you need help to find I will find it sprint s6 thread I used it with app worked like a charm hope that helps
masood8 said:
Hi,
After flashing, was the FRP lock removed automatically ?
Click to expand...
Click to collapse
yes
Also take a look at this to permanently delete frp locks and other locks made by samsung
Edit: it will also fix knox flag after rooting your phone so all apps like android pay will work like a charm again even on rooted device with custom os ^^
https://forum.xda-developers.com/android/software/util-gsd-android-tool-v1-0-1-developer-t3744474
MavericzeK said:
Also take a look at this to permanently delete frp locks and other locks made by samsung
Edit: it will also fix knox flag after rooting your phone so all apps like android pay will work like a charm again even on rooted device with custom os ^^
https://forum.xda-developers.com/android/software/util-gsd-android-tool-v1-0-1-developer-t3744474
Click to expand...
Click to collapse
Hi
Does this work for Samsung S7 GM-930W8 on 8.0.0
---------- Post added at 12:02 AM ---------- Previous post was at 12:02 AM ----------
ecompton59 said:
or you can use the exe z3x box 29.1 it's on xda somewhere if you need help to find I will find it sprint s6 thread I used it with app worked like a charm hope that helps
Click to expand...
Click to collapse
Does this work for Samsung S7 GM-930W8 on 8.0.0 to bypass FRP?
did you install the app that came along with it enter msl and unlock
I hope samsung combination can unlock or bypass FRP lock on S7 Edge SM-G935F/FD Oreo 8.0.
because all method was failed when i tried on Samsung s7 edge with 8.0