POST NO. 2(PERSONAL COUNTING)
NOTE: THIS TUTORIAL WILL HELP YOU TO GET XPOSED FRAMEWORK ON YOUR XPERIA Z
DISCLAIMER: I AM NOT RESPONSIBLE FOR ANY MISHAPPENINGS AND DAMAGE TO YOUR PHONE AND HEART LOL
IF ONE FOLLOWS STEPS CORRECTLY YOU WILL LOVE TO HAVE GOOD TIME WITH XPOSED
STEPS:
REQUIREMENTS:
----> XPERIA Z OBVIOUSLY
----> ROOT(IF NOT ROOTED CHECK MY ROOTING TUTORIAL IN MY PROFILE)
----> ATTACHED FILES
----> RECOVERY(TWRP)(PREFFERED)
----> BRAIN
----> TIME
STEPS:
1. FIRST OF ALL, DOWNLAOD ALL THE FILES PROVIDED, AND MOVE THEM TO THE INTERNAL STORAGE OF THE PHONE.
2. THEN INTALL XPOSED INSTALLER APK FILE.
3. REBOOT TO THE RECOVERY(TWRP)
4. TAP "INSTALL"
5. SELECT XPOSED FRAMEWORK ZIP(HERE, I USED V80 SDK22)(YOU CAN CHOOSE ANY OF THE VERSION PROVIDED)
6. FLASH IT.
NOW AN IMPORTANT NOTE: IF YOUR PHONE DOES NOT BOOTS UP NORMALLY, MEANS YOU ARE STRUCK IN A BOOTLOOP(DONT WORRY), REBOOT USING HARDWARE KEYS TO RECOVERY AND FLASH "XPOSED DISABLER" ZIP FILE, BOOM YOUR PROBLEM IS SOLVED
7. FINALLY WHEN YOUR PHONE BOOTS, GO ON TO THE XPOSED INSTALLER APP, TAP ON "FRAMEWORK", YOU WILL KNOW ABOUT YOUR SUCCESS STATUS
8. NOW THE LAST BUT NOT THE LEAST STEP, INSTALL ANY OF THE XPOSED MOD APP(HERE I USED SERAJR XPOSED FOR XZ LP),
INSTALL IT, GO TO MODULES SECTION, ACTIVATE IT, AND FINALLY REBOOT.
9. DONE, HAPPY XPOSED TO YOU
YOU CAN ALSO DOWNLOAD IMAGES ZIP FILE FOR BETTER UNDERSTANDING AND PERFECTION(THEY ARE ARRANGED IN ORDER)
REASON FOR THIS POST: I GOT MANY QUERIES REALTED TO XPOSED INSTALLATION ON MY WHATSAPP GROUP, FINNALLY DECIDED TO MAKE A THREAD TO HELP THEM AND OTHERS ALSO..
IF YOU LIKE MY WORK PLEASE DONT FORGET TO PRESS THANKS BUTTON, IT WILL NOT COST YOU MORE THAN YOUR HAPPINESS
NOTE: FOR UNINSTALLATION JUST FLASH UNINSTALLER ZIP VIA RECOVERY.
AS I AM NEW HERE, SO I AM NOT ALLOWED TO POST LINKS, YOU CAN ACCES THESE LINKS BY ADDING A "h" OF HTTPS(SEE WITH ATTENTION)
ATTACHMENTS:
---->XPOSED INSTALLER APK ttps://drive.google.com/open?id=0B6JGe-_gG3ftVkVBOGpOT2UxaVk
---->XPOSED DISABLER ZIP ttps://drive.google.com/open?id=0B6JGe-_gG3ftc3VMV1hFd19lR3c
---->XPOSED FRAMEWORK V79 SDK 22 ZIP ttps://drive.google.com/open?id=0B6JGe-_gG3ftM19wYVRZQ3duRGM
---->XPOSED FRAMEWORK V80 SDK 22 ZIP ttps://drive.google.com/open?id=0B6JGe-_gG3ftZXg4YmNjcEVOMW8
---->XPOSED UNINSTALLER ZIP ttps://drive.google.com/open?id=0B6JGe-_gG3ftYlFtODR6YThrSVU
HAVE A GOOD DAY :laugh:
Hyper-thanks
Just what I needed. Simple and worked perfectly
Skickat från min SM-T805 via Tapatalk
Not working on C6602. 5.1.1, Stock, Rooted, Bootloader Locked. Stuck on a bootloop.
Any suggestions?
dj.adil said:
Not working on C6602. 5.1.1, Stock, Rooted, Bootloader Locked. Stuck on a bootloop.
Any suggestions?
Click to expand...
Click to collapse
Some times this bootloops happen depending upon junk values on phone.
wipe dalvik cache or TRY AGAIN
thanks
all the best
thank you good tutorial
Dowload
Related
After a couple of days bricking around, finally found a way to have all the goodies and still have full device encryption. Something that isn't working with custom recovery installed.
Short guide:
1. Stock ROM 5.1.1
2. Encrypt device first (!)
3. Root using Kingroot (NewKingrootV4.82_C138_B250_xda_release_2016_03_09_105243.apk) (http://forum.xda-developers.com/android/apps-games/one-click-root-tool-android-2-x-5-0-t3107461)
4. Reboot
4. Remove Kingroot and install SuperSu using this guide (http://www.w0lfdroid.com/2015/05/How-to-Remove-Replace-KingUser-KingRoot-with-SuperSU.html)
5. Reboot
6. Download Xposed Framework sdk22, arm (not arm64) from http://forum.xda-developers.com/showthread.php?t=3034811
6. Install Xposed Framework zip trough flashfire-0.24.apk using this guide (http://forum.xda-developers.com/g4/themes-apps/guide-installing-xposed-locked-t3181593)
7. Reboot
7. Install the xposed installer
8. Good to go!
Finally have all the tweaks and no worries in case of lost/stolen device.
It's working!
Only followed steps 3 to 5 though.
Rest are not required.
Do I need to have a unlcoked bootloader?
Dinkec27 said:
Do I need to have a unlcoked bootloader?
Click to expand...
Click to collapse
no, you keep all the goodies
Please, note that according to this thread :
http://forum.xda-developers.com/z3-compact/general/kingroot-4-0-t3105593
There may be issues with privacy and your IMEI may be sent to China when you're rooting with Kingroot... Which may be bad. Pretty bad. (It allows for instance the creation of fake phones with real IMEI.)
Has anyone tried flashing Xposed through Flashfire on Android 6.0.1 Beta?
I get root with this easy method, thank you man!
I try to install V4A (through Apk) but when i install the drivers, a message says: "Driver install failed: the busybox installation on you device does not work... etc."
I have just installed the last version of busybox in /system/xbin.
How can i resolve it?
FunkyCrime said:
I get root with this easy method, thank you man!
I try to install V4A (through Apk) but when i install the drivers, a message says: "Driver install failed: the busybox installation on you device does not work... etc."
I have just installed the last version of busybox in /system/xbin.
How can i resolve it?
Click to expand...
Click to collapse
I think you need to install XZDualRecovery because that has the RIC fix(basically read and write permissions for system without unlocked bootloader),I had this issue as well and this solved it for me
Hi all,
As requested I make this small guide to explain how to install working Xposed Framework. I will not explain what is Xposed and how it works but you can find you answers here: http://forum.xda-developers.com/showthread.php?t=3034811
First of all you must have a rooted device and custom recovery.
1) Download and install the apk from the thread mentioned before.
2)Download flashable zip framework and copy it to your phone. Direct link: http://dl-xda.xposed.info/framework/sdk23/arm64/xposed-v86-sdk23-arm64.zip
3) Reboot phone in recovery and install framework zip.
4) Reboot to Android and launch Xposed installer, allow root permissions if asked, verify in "Framework" tab you must have "Xposed framework version 86 is active".
5) That's all !
I recommend you (very optional) to install XDA Labs app to have more modules and updates.
Thanks for the guide, i just flashed it.
PS: what other modules except Xprivacy can i use now ?
hp6830s said:
Thanks for the guide, i just flashed it.
PS: what other modules except Xprivacy can i use now ?
Click to expand...
Click to collapse
Xperia xposed, amplify is also a great app but must have the donation version for the full version., gravity box, greenify(works better in root/xposed mode) if I remember anymore I used to use I'll add them here
Sent from my Xperia XA using XDA Labs
aidy.lucas said:
Xperia xposed, amplify is also a great app but must have the donation version for the full version., gravity box, greenify(works better in root/xposed mode) if I remember anymore I used to use I'll add them here
Click to expand...
Click to collapse
+1 and you can add NeoPowerMenu, ScreenOffAnimation, ForceDoze and YouTube Background Playback for me
Nice, will check those. I must check what Greenify it does under xposed, think i saw that options.
First of all you must have a rooted device and custom recovery.
Click to expand...
Click to collapse
Hi,
Custom recovery can help me flash .zip but How I can make custom recovery?
Work with xperia xa ultra 3211 ?
Thanks for your support
Ant38 said:
Work with xperia xa ultra 3211 ?
Thanks for your support
Click to expand...
Click to collapse
Try Magisk Xposed with xperia XAU it should be quicker and work better. If you prefer using the standard Xposed, then yes it works. My recommendation for Xposed modules (which I personally use on my Xperia XA) are
1. Gravity box
2. Assistant Enabler (battery drainer)
3. One Tap download module (Plus Facebook and YouTube add ons)
4. Xprivacy
5. XinternalSD
6. LockMod
7. Xinstaller (does work on android 6.0 despite description)
Using Magisk Xposed allows you to go back if an issue arises without backups (I'd still recommend making a new backup every month) I've made a thread for Magisk on Xperia XA, take a look if you're interested.
Thank you for this guide.
rrvuhpg said:
Hi all,
As requested I make this small guide to explain how to install working Xposed Framework. I will not explain what is Xposed and how it works but you can find you answers here: http://forum.xda-developers.com/showthread.php?t=3034811
First of all you must have a rooted device and custom recovery.
1) Download and install the apk from the thread mentioned before.
2)Download flashable zip framework and copy it to your phone. Direct link: http://dl-xda.xposed.info/framework/sdk23/arm64/xposed-v86-sdk23-arm64.zip
3) Reboot phone in recovery and install framework zip.
4) Reboot to Android and launch Xposed installer, allow root permissions if asked, verify in "Framework" tab you must have "Xposed framework version 86 is active".
5) That's all !
I recommend you (very optional) to install XDA Labs app to have more modules and updates.
Click to expand...
Click to collapse
Xposed working in Nougat?
Whenever I install the framework, and reboot to system, the phone gets bricked. It doesn't turn on, screen doesn't turn on, no vibrations, nothing. Phone gets bricked
Any help is appreciated
Yes it's working but this guide will not work for Nougat. You have to install Xposed through Magisk modules.
Im not responsable for hard bricks/ soft bricks on youre devices do at your own risk
I already test it and works on my rooted ms428
I want to give a special thanks to the devs for the patience, dedication and for working hard to make the root possible for this device
Its highly recommended to perform a nan-backup incase of an emergency or incase if you want to go back
The steps are quite simple
1) root your device, if you dont have it rooted here is the link for the steps to root for the lg k10 both metropcs and T-Mobile editions only
(forum.xda-developers.com/lg-k10/development/root-twrp-rom-t-mobile-k428-k10-t3582493)
2) install magisk manager on playstore
3) open magisk manager and install the zip file via automatic
4) boot into twrp and flash the zip file located in magisk folder
5) once it done wipe cache and dalvik cache
6) once it finish booting open magisk manager and click on downloads tab
7) install on magisk xposed framework sdk23 (marshmallow) *note if you have lollipop its the sdk22
8) once it finished click on reboot later, boot into twrp and wipe dalvik cache and cache and reboot
9)install xposed apk (its the one i use on my ms428 forum.xda-developers.com/xposed/material-design-xposed-installer-t3137758)
10) enjoy
See it for your self ?
itztropic- after I rooted I just downloaded the xposed framework from the website normally and it worked properly, I must be not understanding something about the method you described?
I don't really understand what magisk is for I thought it was a developer tool of some sort (which i'm not)
leopard_fist said:
itztropic- after I rooted I just downloaded the xposed framework from the website normally and it worked properly, I must be not understanding something about the method you described?
I don't really understand what magisk is for I thought it was a developer tool of some sort (which i'm not)
Click to expand...
Click to collapse
Magisk is a frontend designed to manage apps and modules that use systemless capabilities. It has its own superuser based on phh's superuser, and features modules much like Xposed, though some are useful even on Nougat. Xposed can be installed systemless as well and Magisk can disable and re-enable root and Xposed on the fly, as well as its modules, so you can have a rooted phone and still use Android Pay and Pokemon Go.
ItzTropic said:
Im not responsable for hard bricks/ soft bricks on youre devices do at your own risk
I already test it and works on my rooted ms428
I want to give a special thanks to the devs for the patience, dedication and for working hard to make the root possible for this device
Its highly recommended to perform a nan-backup incase of an emergency or incase if you want to go back
The steps are quite simple
1) root your device, if you dont have it rooted here is the link for the steps to root for the lg k10 both metropcs and T-Mobile editions only
(forum.xda-developers.com/lg-k10/development/root-twrp-rom-t-mobile-k428-k10-t3582493)
2) install magisk manager on playstore
3) open magisk manager and install the zip file via automatic
4) boot into twrp and flash the zip file located in magisk folder
5) once it done wipe cache and dalvik cache
6) once it finish booting open magisk manager and click on downloads tab
7) install on magisk xposed framework sdk23 (marshmallow) *note if you have lollipop its the sdk22
8) once it finished click on reboot later, boot into twrp and wipe dalvik cache and cache and reboot
9)install xposed apk (its the one i use on my ms428 forum.xda-developers.com/xposed/material-design-xposed-installer-t3137758)
10) enjoy
Click to expand...
Click to collapse
Don't re-create threads when they are already present. LG K10 ROMS, KERNELS, RECOVERIES, & OTHER DEVELOPMENT is not the place to post these kinds of things.
There is already a thread for Xposed: https://forum.xda-developers.com/lg-k10/how-to/guide-xposed-lg-k10-t3505970.
Post it there. Delete this thread.
GuyInDogSuit said:
Magisk is a frontend designed to manage apps and modules that use systemless capabilities. It has its own superuser based on phh's superuser, and features modules much like Xposed, though some are useful even on Nougat. Xposed can be installed systemless as well and Magisk can disable and re-enable root and Xposed on the fly, as well as its modules, so you can have a rooted phone and still use Android Pay and Pokemon Go.
Click to expand...
Click to collapse
Thanks for the explanation-also Overdrive took some time via pm to explain a few things about it. I've been working with it a couple days and I like it now that I understand, another cool thing to learn about
Here is in details and with all files on one place how to root stock Android Pie for SM-G955F device.
Please if you don't know what are you doing, better avoid this straight forward process because I presume you already knows it.
Also...it will work on ALL Pie firmware versions.
Download on your SDcard all files attached here and...
Rooting process goes as follows.
1. Flash stock firmware G955FXXU4DSBA_G955FOXM4DSBA_DBT and wait for welcome screen on device and reboot in download mode again
2. Flash latest TWRP recovery
3. Enter in TWRP recovery and allow file modifications, then
3a. Format data from recovery...reboot recovery again and repeat procedure from above
4. Install from TWRP no-verity-opt-encrypt-samsung-1.0.zip from link below.
5. Reboot recovery
6. From recovery install Magisk-v18.1(18100).zip
7. Now restart and configure your device as you need.
8. Install latest Magisk app and open app, and within app, install all necessery files
9. Now you are rooted
Install Viper4android
To prepare before, please with Root explorer app rename file audio_effects.conf in audio_effects.conf.BAK, located in folder Vendor/etc
1. Install latest busybox
2. Install ViPER4Android_FX_v2505_A7.x_Nougat_IO_test_fix.apk from here
3. Reboot device and go into TWRP
3a. Install FUSION KERNEL from link below ( one of the fastest kernels I have ever seen)
4. Install Viper drivers as usuall
5. Reboot device
Viper4android is installed.
In Settings check in Sound and vibrations menu if Viper is your default sound module, if not, select it.
.
THANK YOU NOTE GOES TO ALL DEVELOPERS WHO BLESSED US WITH THEIR WORKS !
.
MAGISK
https://www.xda-developers.com/how-to-install-magisk/
FUSION KERNEL with permissive mode
https://www.leorom.cc/index.php/fusion.html?t=1553420049699
TWRP S8+
https://forum.xda-developers.com/galaxy-s8+/development/recovery-twrp-galaxy-s8-exynos-t3594756
VIPER4ANDROID
https://forum.xda-developers.com/showthread.php?t=2191223
I do not take any responsibility for possible errors or damaged devices caused by lack of someones knowledge.
.
Does anyone tryed it?
Will try tomorrow!
Thanks!
Just followed your steps and my phone is rooted now!
keunhuvac said:
Just followed your steps and my phone is rooted now!
Click to expand...
Click to collapse
Excellent !
Btw, i use viper module in magisk manager and it works fine!
keunhuvac said:
Btw, i use viper module in magisk manager and it works fine!
Click to expand...
Click to collapse
Same here, works fine with Magisk Module ?
keunhuvac said:
Btw, i use viper module in magisk manager and it works fine!
Click to expand...
Click to collapse
Thank you for that info. I didn't tryed module rather then install standalone app. Anyway, good to work on both ways.
tin2404 said:
Here is in details and with all files on one place how to root stock Android Pie for SM-G955F device.
Please if you don't know what are you doing, better avoid this straight forward process because I presume you already knows it.
Also...it will work on ALL Pie firmware versions.
Download on your SDcard all files attached here and...
Rooting process goes as follows.
1. Flash stock firmware G955FXXU4DSBA_G955FOXM4DSBA_DBT and wait for welcome screen on device and reboot in download mode again
2. Flash latest TWRP recovery
3. Enter in TWRP recovery and allow file modifications, then
3a. Format data from recovery...reboot recovery again and repeat procedure from above
4. Install from TWRP no-verity-opt-encrypt-samsung-1.0.zip from link below.
5. Reboot recovery
6. From recovery install Magisk-v18.1(18100).zip
7. Now restart and configure your device as you need.
8. Install latest Magisk app and open app, and within app, install all necessery files
9. Now you are rooted
Install Viper4android
To prepare before, please with Root explorer app rename file audio_effects.conf in audio_effects.conf.BAK, located in folder Vendor/etc
1. Install latest busybox
2. Install ViPER4Android_FX_v2505_A7.x_Nougat_IO_test_fix.apk from here
3. Reboot device and go into TWRP
3a. Install RZ KERNEL PIE from here
4. Install Viper drivers as usuall
5. Reboot device
Viper4android is installed.
In Settings check in Sound and vibrations menu if Viper is your default sound module, if not, select it.
.
THANK YOU NOTE GOES TO ALL DEVELOPERS WHO BLESSED US WITH THEIR WORKS !
.
MAGISK
https://www.xda-developers.com/how-to-install-magisk/
RZ KERNEL with permissive mode
https://forum.xda-developers.com/ga...t/kernel-rz-kernel-samsung-galaxy-s8-t3893139
TWRP S8+
https://forum.xda-developers.com/galaxy-s8+/development/recovery-twrp-galaxy-s8-exynos-t3594756
VIPER4ANDROID
https://forum.xda-developers.com/showthread.php?t=2191223
I do not take any responsibility for possible errors or damaged devices caused by lack of someones knowledge.
.
Click to expand...
Click to collapse
what about OEM unlock, I must turn on??
jackherer72 said:
what about OEM unlock, I must turn on??
Click to expand...
Click to collapse
https://forum.xda-developers.com/sitesearch.php?q=oem unlock
Hello, you have solution for root samsung s8 + g9550zhu4dSg2 ?
After updating magisk to version 18, oneplus 5t wasn't remain rooted but got stuck in bootloop. I after many attempts got the method to root it again.
I'm not a developer. I'm just an ordinary Android user. I didn't find any method on xda until now so think to help others.
Here I'll show you the step by step procedure to get root with the updated version of magisk.
I've tested it on my oneplus 5t with latest Android Pie.
Do it on you own risk I'm not responsible if you get brick your device.
Download all necessory files before get start.
1. TWRP recovery
https://forum.xda-developers.com/oneplus-5t/development/recovery-twrp-3-2-1-0-oreo-8-0-8-1-t3729673
2. Magisk
link in description
3. Xposed Framework
https://www.xda-developers.com/xposed-framework-unofficial-port-android-pie/
4. Copy Magisk and Xposed framework files to mobile.
Procedure
1. Open Fastboot menu and connect device to PC.
2. Install TWRP recovery for pie.
i. download the .img recovery file.
ii. place it in "Minimal ADB and Fastboot" folder and copy its name.
iii. open terminal and write "fastboot flash recovery "copied name".img " and hit enter.
3. After installing TWRP, reboot to recovery by pressing volume down key.
4. Install magisk and reboot.
i. Reboot the device and install magisk manager apk.
ii. and make sure that you got stable root.
5. Reboot to recovery and install Xposed framework
i. method is in the link given above.
a. Download and install the Riru Core Magisk Module.
b. Download and install the EdXposed Magisk Module.
c. Reboot your phone.
d. Install the Xposed Installer APK from XDA Senior Member DVDandroid.
6. done. If you did the same then you got rooted with magisk 18.2.
hmm
Mirza_Husnain said:
After updating magisk to version 18, oneplus 5t wasn't remain rooted but got stuck in bootloop. I after many attempts got the method to root it again.
I'm not a developer. I'm just an ordinary Android user. I didn't find any method on xda until now so think to help others.
Here I'll show you the step by step procedure to get root with the updated version of magisk.
I've tested it on my oneplus 5t with latest Android Pie.
Do it on you own risk I'm not responsible if you get brick your device.
Download all necessory files before get start.
1. TWRP recovery
https://forum.xda-developers.com/oneplus-5t/development/recovery-twrp-3-2-1-0-oreo-8-0-8-1-t3729673
2. Magisk
link in description
3. Xposed Framework
https://www.xda-developers.com/xposed-framework-unofficial-port-android-pie/
4. Copy Magisk and Xposed framework files to mobile.
Procedure
1. Open Fastboot menu and connect device to PC.
2. Install TWRP recovery for pie.
i. download the .img recovery file.
ii. place it in "Minimal ADB and Fastboot" folder and copy its name.
iii. open terminal and write "fastboot flash recovery "copied name".img " and hit enter.
3. After installing TWRP, reboot to recovery by pressing volume down key.
4. Install magisk and reboot.
i. Reboot the device and install magisk manager apk.
ii. and make sure that you got stable root.
5. Reboot to recovery and install Xposed framework
i. method is in the link given above.
a. Download and install the Riru Core Magisk Module.
b. Download and install the EdXposed Magisk Module.
c. Reboot your phone.
d. Install the Xposed Installer APK from XDA Senior Member DVDandroid.
6. done. If you did the same then you got rooted with magisk 18.2.
Click to expand...
Click to collapse
It dont work it still gives boothaning on the Oneplus logo
And that means that i cant follow all your text , im not able to install Magisk Apk
so the rest of your list is not a possibly for me
zagget said:
It dont work it still gives boothaning on the Oneplus logo
And that means that i cant follow all your text , im not able to install Magisk Apk
so the rest of your list is not a possibly for me
Click to expand...
Click to collapse
Really sad that it doesn't work for you.
Try this:
Install ROM from zero, (or wipe it off). Then try to install the magisk 18.2.
Hopefully it'll work for you.
Thanks
I will look at it
But is stupid that i need to install the rom from start
And where is Magisk 18.2 comming from
The last one on the official page is 18.1
So how do you get the Magisk 18.2