Database Users

Huawei y3ii

Hi!
Who has/bought a new HUAWEI Y3II model yet?
Any conclusion?
Which TWRP try to install?

ANOka said:
Hi!
Who has/bought a new HUAWEI Y3II model yet?
Any conclusion?
Which TWRP try to install?
Click to expand...
Click to collapse
Do you have a dump of your current rom ?

Nonta72 said:
Do you have a dump of your current rom ?
Click to expand...
Click to collapse
Not yet.
I'm thinking about to by the device.
If I buy, how can I make the dump?

ANOka said:
Not yet.
I'm thinking about to by the device.
If I buy, how can I make the dump?
Click to expand...
Click to collapse
Follow this guide when you get it https://forum.hovatek.com/thread-13347.html

RECOVERY
RECOVERY (verified)
android-latino.org/index.php/topic,1574.0.htm
ROM Aosp 5.1.1 (verified operates 2 SIM)
android-latino.org/index.php/topic,1595.0.html

I successfully flashed TWRP to the LUA-L01 variant but flashing SuperSu.zip makes the phone stuck at boot animation. Tried all versions of SuperSu

Flash in sequence:
1) UPDATE-unSU.zip
2) superuser.zip
After your phone boots up install the superusephh's.apk
and you are good to go with root rights.

batraxorama said:
Flash in sequence:
1) UPDATE-unSU.zip
2) superuser.zip
After your phone boots up install the superusephh's.apk
and you are good to go with root rights.
Click to expand...
Click to collapse
Thank you once again, can i get any good custom rom of 6.0 and above for this device?

What LUA version do you have?
21?
And c576,328,479?

huawei lua-u03
batraxorama said:
What LUA version do you have?
21?
And c576,328,479?
Click to expand...
Click to collapse
Tengo un huawei lua-u03 que version de cwm recovery puedo instalarle?

tengo ela misma duda
Beginner2744 said:
Tengo un huawei lua-u03 que version de cwm recovery puedo instalarle?
Click to expand...
Click to collapse
amigo tengo la misma duda conseguiste alguna info?

How to get System Status: Official

Before rooting my Moto G4 plus, system status in the bootloader was "Official". After installing twrp I made a Nandroid backup and then rooted my device.
The system status changed to Modified
Now I have restored the unrooted system again and reflashed the stock recovery.
But still the system status in bootloader is " Modified"
My question is : Will this hamper ota updates?
Probable ans I think: Yes coz system is Modified according to bootloader though actually it's not (coz it's stock only)
Discussion: Is there any way to perform ota without re-flashing the stock firmware?
Note: I have the Backup of Unrooted (unmodified) system and the stock recovery.img too.
Help and participation really appreciated

No. This will not hamper OTA updates. Infact you have already taken the steps necessary for updating once the phone is rooted. Unrooting and restoring stock recovery is what all users who have modified their system have to do, once they recieve an ota notification. Also u don't need to reflash the stock firmware, once the ota arrives, u can update without any issues.
The only problem with having a modified system though is that you might not get any warranty support from Motorola. But then, i am sure you are aware that unlocking the bootloader voids your warranty...
Sent from my Moto G4+ using Tapatalk.

Thank u zazzy24. Help really appreciated.

i want to get my moto g4 plus ghost touch fixed for that i need to set my software status back to official
please help me i have locked bootloader, stock rom and recovery and no root in phone..
please please reply soon

kumaranmol425 said:
i want to get my moto g4 plus ghost touch fixed for that i need to set my software status back to official
please help me i have locked bootloader, stock rom and recovery and no root in phone..
please please reply soon
Click to expand...
Click to collapse
Well u have not done anything to Ur phone , no bootloader unlock , no custom recovery and no root .. so Ur software status will be official ..

kumaranmol425 said:
i want to get my moto g4 plus ghost touch fixed for that i need to set my software status back to official
please help me i have locked bootloader, stock rom and recovery and no root in phone..
please please reply soon
Click to expand...
Click to collapse
I understand want you meant.See first to get stock you have to flash the stock firmware and lock the bootloader.Though bootloader will show modified.But to get there is only one way i.e through an ota update.So you will have to wait unless a new ota comes.And after installing ota it will become official.

On the same lines can anybody share the recovery.img for Indian version XT1643, Build no MPJ24.139-23.1??
Thanks in advance

Guys mere mobile ek problem ho rhi hai jb bhi mai apne moto g4 plus ko restart krta hu sbse bootloader mode open hota phir muje start pai click krke kholna padta hai or jb bhi mai update install krta hu mobile switch off hota hai or bootloader mode on hojata hai phir mai open krta hu mobile ko phir update install unsuccessful aata hai.
Moderator Edit:
@Himanshu999 - Forum Rule number 4:
4. Use the English language.
We understand that with all the different nationalities, not everyone speaks English well, but please try. If you're really unable to post in English, use an online translator. You're free to include your original message in your own language, below the English translation. (This rule covers your posts, profile entries and signature).

Himanshu999 said:
Guys mere mobile ek problem ho rhi hai jb bhi mai apne moto g4 plus ko restart krta hu sbse bootloader mode open hota phir muje start pai click krke kholna padta hai or jb bhi mai update install krta hu mobile switch off hota hai or bootloader mode on hojata hai phir mai open krta hu mobile ko phir update install unsuccessful aata hai.
Click to expand...
Click to collapse
English is the language, XDA RULES...
Anyway,
You need to run these commands from ADB/Fastboot, (see if you are using mfastboot)
> fastboot oem fb_mode_set
> fastboot oem fb_mode_clear
Have you installed custom recovery..?
You need stock recovery to update ROM successfully..

[BRICK] Downgrading to MM

I have VNS-L31 with android Nougat from BadWolf, and while trying to go back to MM my phone bricked... What can I do? I only have the options to enter fastboot, and erecovery. I CAN'T enter TWRP.
My phone was rooted (obiously), with TWRP Nougat, MIUI 5.0, and I don't know what more details do I have to give you... PLEASE HELP ME

1- OEMInfo C432 DualSIM flashed with Recovery?
2- DLOAD/UPDATE.APP (MM)
3- Format with eRecovery
3- Boot...

BadWolfYe said:
1- OEMInfo C432 DualSIM flashed with Recovery?
2- DLOAD/UPDATE.APP (MM)
3- Format with eRecovery
3- Boot...
Click to expand...
Click to collapse
Hola BadWolf, te hablo en español y sera mucho mas facil, no tengo acceso al recovery y no puedo flashear .APP por fastboot porque me da un error de comando y en eRecovery no solo tengo Reboot Instalar por wifi (que no funciona) y Apagar...

JotaZ said:
Hola BadWolf, te hablo en español y sera mucho mas facil, no tengo acceso al recovery y no puedo flashear .APP por fastboot porque me da un error de comando y en eRecovery no solo tengo Reboot Instalar por wifi (que no funciona) y Apagar...
Click to expand...
Click to collapse
las normas no permiten hablar en español, lo siento xD
Unlock with fastboot the bootloader (with your old unlock code) there are relocked after dload
ps; with wifi in eRecovery for me never works XD

BadWolfYe said:
1- OEMInfo C432 DualSIM flashed with Recovery?
2- DLOAD/UPDATE.APP (MM)
3- Format with eRecovery
3- Boot...
Click to expand...
Click to collapse
Sir, where I can get the oem info?

Ajp30 said:
Sir, where I can get the oem info?
Click to expand...
Click to collapse
sorry but it's in spanish:
http://www.htcmania.com/showthread.php?t=1210915
use g.translator or similar...

BadWolfYe said:
sorry but it's in spanish:
http://www.htcmania.com/showthread.php?t=1210915
use g.translator or similar...
Click to expand...
Click to collapse
Thanks...
1. Dowliad oem info
2. Unlock bootloader
3. Flash nougat recovery
4.flash oem info using nougat recovery
5. Flash stock mm room using the 3 button method.
Please confirm if this process is correct. Thanks

Ajp30 said:
Thanks...
1. Dowliad oem info
2. Unlock bootloader
3. Flash nougat recovery
4.flash oem info using nougat recovery
5. Flash stock mm room using the 3 button method.
Please confirm if this process is correct. Thanks
Click to expand...
Click to collapse
and after downgrade to MM Dload...reboot to eRecovery and wipe with this the data (no with custom!)

BadWolfYe said:
and after downgrade to MM Dload...reboot to eRecovery and wipe with this the data (no with custom!)
Click to expand...
Click to collapse
Thanks... so the above mentioned steps are corect?thanks you are very much helpful

Ajp30 said:
Thanks... so the above mentioned steps are corect?thanks you are very much helpful
Click to expand...
Click to collapse
the rest are correct, yes

BadWolfYe said:
1- OEMInfo C432 DualSIM flashed with Recovery?
2- DLOAD/UPDATE.APP (MM)
3- Format with eRecovery
3- Boot...
Click to expand...
Click to collapse
I cannot enter to the recovery and flash it neither, I can enter fastboot and it says everything is unlockes (two options in red), but when I flash system.img, recovery.img, etc, etc, it gives me an error with the command in cmd. If it says everything is unlocked, I guess bootloader is unlocked right? I don't know what more can I do... I have to try that steps you said in another answer, tonight I will try and say something.
Thanks for your help dude.

BadWolfYe said:
las normas no permiten hablar en español, lo siento xD
Unlock with fastboot the bootloader (with your old unlock code) there are relocked after dload
ps; with wifi in eRecovery for me never works XD
Click to expand...
Click to collapse
And I haven't got my old code, where can i find it?

JotaZ said:
And I haven't got my old code, where can i find it?
Click to expand...
Click to collapse
mp with imei and s/n
you need re--unlock

I have managed to do all the steps one by one (2h 15mins for the f*****g bootloader code xD) but right now I'm updating with the 3 buttons system, I hope this works, let me check and say something

JotaZ said:
I have managed to do all the steps one by one (2h 15mins for the f*****g bootloader code xD) but right now I'm updating with the 3 buttons system, I hope this works, let me check and say something
Click to expand...
Click to collapse
LMAO...
Huawei it's strange...xd

PE-UL00 : naw .... PE-TL10 , my experience

Hello I wanted to bring here my update on my experience Honor6plus PE-UL00.
Today I became a happy owner of PE-TL10 (all in Italian) as a result of renovation of ROM.
I'm a little 'neat freak and I like to try new solutions and updated as a result of this, I sent in brik smartphone. Therefore, after reading dozens of pages, I set to work, putting in fastboot mode and using the multi-tool tool, I installed the 4 files required by the multi-tool (boot.img - cust.img - recovery .img - system.img, extracts from Rom B351 with HuaweiUpdateExtractor) in UNBRICK mode and my smartphone is happily resurrected. ..I back the unit in operation ...
Connected to wifi at home I have updated with the update and did 2 updates the Huawei home though everything always with Chinese written (which gave me a huge hassle). As a result of these updates I was installed me B561 with MM Emui 4.0. Overjoyed. But it did not last long.
I had to do the root but I could not find a TWRP or cwm you could flash to make the root and then I thought again to return to the B351. I try to flash again 4 files boot.img - cust.img - recovery.img - system.img and again brik ... I miss ... the phone died. Only after the trouble I read that was not the procedure to be used, I would have to use the rollback file.
However, after repeated tests with various files can not combine anything ... died for dead, do the ultimate test ... drain the B571 last European ROM for PE-TL10 and I try to flash with the 4 boot.img file - cust multi-tool .img - recovery.img - system.img extracts from the B571 and go ...
Hooray ... .lo smartphone is risen ... now all in Italian and new PE-TL10 name and I super super happy.
... for what you can serve, my experience.
Now I have also made the ROOT. All right.
P.S .: sorry for the English, but the message I translated it with google translator.

Have you lost the support for the second sim?

Xavio[IT] said:
Have you lost the support for the second sim?
Click to expand...
Click to collapse
No no everything works as before
Sent from my PE-TL10 using XDA-Developers Legacy app

Root procedure please for TL10
Ciao Roger, sono così felice che tu sia riuscito a rianimare il tuo dispositivo e sono un grande fan di questo modello, ti prego gentilmente di mostrarmi la procedura corretta per ottenere il root su questo modello PE-TL10, molte grazie!
---------------------
Hi Roger, I'm so glad you managed to resuscitate your device, and I'm a big fan of this model, please kindly show me the correct procedure for getting root on this PE-TL10 model, many thanks!

Rom Mi A2 Android P - server Netherlands

Rom Mi A2 Android PIE Netherlands - Amsterdam
V10.0.1.0 PDIMIFJ
NEW POST 
ota update IMG : https://tinyurl.com/ycjaxdjz
By Gleison lima
https://imgur.com/a/gtrTefm

Gleison lima said:
Rom Mi A2 Android PIE Netherlands - Amsterdam
V10.0.1.0 PDIMIFJ
ota update IMG : tinyurl.com/ya8y2wzk
By Gleison lima
Click to expand...
Click to collapse
The canceled beta ROM is the same officially released.

J.D.M said:
The canceled beta ROM is the same officially released.
Click to expand...
Click to collapse
the ota update appeared on my device and I copied the update file to the system folder

Gleison lima said:
Rom Mi A2 Android PIE Netherlands - Amsterdam
V10.0.1.0 PDIMIFJ
ota update IMG : https://tinyurl.com/ya8y2wzk
By Gleison lima
https://imgur.com/a/gtrTefm
Click to expand...
Click to collapse
Thanks a lot.

Gleison lima said:
Rom Mi A2 Android PIE Netherlands - Amsterdam
V10.0.1.0 PDIMIFJ
ota update IMG : https://tinyurl.com/ya8y2wzk
By Gleison lima
https://imgur.com/a/gtrTefm
Click to expand...
Click to collapse
Thx how to install plz ? No ota in France

rafik25 said:
Thx how to install plz ? No ota in France
Click to expand...
Click to collapse
https://forum.xda-developers.com/mi-a2/how-to/enable-update-ota-mi-a2-android-pie-t3868327

Mano, baixei o arquivo que você disponibilizou. Como faço pra instalar? Serve se meu telefone estiver no segundo patch de novembro?
Obrigado

Gleison lima said:
Rom Mi A2 Android PIE Netherlands - Amsterdam
V10.0.1.0 PDIMIFJ
ota update IMG : https://tinyurl.com/ya8y2wzk
By Gleison lima
https://imgur.com/a/gtrTefm
Click to expand...
Click to collapse
This worked flawlessly man, thank you !
Flashed with .bat files, and even preserve all the data, it works guys ! :good::good::good:
Just choose option 2, when asked at the end of flashing with .bat.

alyssonbarroso said:
Mano, baixei o arquivo que você disponibilizou. Como faço pra instalar? Serve se meu telefone estiver no segundo patch de novembro?
Obrigado
Click to expand...
Click to collapse
O seu bootloard está desbloqueado? Se sim execute 1 arquivo modo fastboot.bat ao entra no modo fastboot execute o 2 arquivo instalador.bat no final da instalação vai aparecer a opção de formata o aparelho escolha a opção 2 NÃO

minnuss said:
This worked flawlessly man, thank you !
Flashed with .bat files, and even preserve all the data, it works guys ! :good::good::good:
Just choose option 2, when asked at the end of flashing with .bat.
Click to expand...
Click to collapse
will that break ota?
my bootloader is locked

minnuss said:
This worked flawlessly man, thank you !
Flashed with .bat files, and even preserve all the data, it works guys ! :good::good::good:
Just choose option 2, when asked at the end of flashing with .bat.
Click to expand...
Click to collapse
so just enter fastboot and flash the installation bat file? then wait until it finish?

It will work if Im on a custom rom based on Wayne? Im on CarbonRom Pie. What I have to do to install this one?

bootzfat said:
so just enter fastboot and flash the installation bat file? then wait until it finish?
Click to expand...
Click to collapse
Yes, just don't touch and do not close until it finishes, it will take a while.
When it ask for an option 1 or 2, pres 2, and that will preserve your data, there will be no reset, like a real OTA update on your phone.
carloandreaguilar said:
will that break ota?
my bootloader is locked
Click to expand...
Click to collapse
No, it should not break OTA.

minnuss said:
Yes, just don't touch and do not close until it finishes, it will take a while.
When it ask for an option 1 or 2, pres 2, and that will preserve your data, there will be no reset, like a real OTA update on your phone.
No, it should not break OTA.
Click to expand...
Click to collapse
2 times try to flash. But it stuck at boot for 1 hour. I guess already bootloop.
3 times trying nothing happen. Also auto restart. Hurmm

AzFar94 said:
2 times try to flash. But it stuck at boot for 1 hour. I guess already bootloop.
3 times trying nothing happen. Also auto restart. Hurmm
Click to expand...
Click to collapse
Do you have unlocked critical as well ?
Did you wait for it to finish the first time, about 30min of flashing... ?!
It worked for me in first try.

minnuss said:
Do you have unlocked critical as well ?
Did you wait for it to finish the first time, about 30min of flashing... ?!
It worked for me in first try.
Click to expand...
Click to collapse
Already unlock bootloader and i wait until it finish. Until choose 2 at the end of flashing.
Wait... How to unlock critical? It is different with unlock bootloader?

AzFar94 said:
Already unlock bootloader and i wait until it finish. Until choose 2 at the end of flashing.
Wait... How to unlock critical? It is different with unlock bootloader?
Click to expand...
Click to collapse
Command is
fastboot flashing unlock_critical
Some users said that is the reason why for some flashing of PIE worked, and for some don't.
Try it, but I should worn you, that when you unlock critical, it will delete the phone all over again, just like when you unlocked OEM for the first time.

minnuss said:
Command is
fastboot flashing unlock_critical
Some users said that is the reason why for some flashing of PIE worked, and for some don't.
Try it, but I should worn you, that when you unlock critical, it will delete the phone all over again, just like when you unlocked OEM for the first time.
Click to expand...
Click to collapse
Ohhh. Now i get it. That's why when i flash pie i saw a few text saying that error and bla bla bla ??

Thanks M8
Work perfect here

nnexuss said:
Thanks M8
Work perfect here
Click to expand...
Click to collapse
Fastboot flash or via vpn ota?