Hi all,
I am having problems with calling since i bought my n9005 4 years back, people did not hear me speak on the other side, but when i put the phone in speaker mode the sound was just fine on receiver side.
Using different roms from stock to CM13 and miui nothing software related seemed to be the problem (tried all the things that i could find on the net and in settings).
Anyway, so I always been calling on speaker or using my huawei watch.
Now after all this time i thought lets fix it, and bought a new USB / Mic unit which i installed without success.
Since on speaker calls still works great, normal calls only cracking sound, i thought maybe its possible to redirect thru software to secondary mic on top of phone which i believe gets activated when talk on speaker phone?
Thanks in advance.
Related
Hi,
Since my Hermes fell off the table people keep complaining that they have problems hearing my voice while talking on the phone. They say the volume of my voice is too low. When using a headset everything's fine.
I've never had a problem like that, nevertheless I dismantled the Hermes to see if there was anything wrong with the microphone after the fall, but it seemed ok.
I also recorded my own voice using the voice recorder in WM6 to test the microphone and strangely enough my voice sounds pretty loud and clear to me.
After some googling I found that many people seem to have a problem with their voice barely being heard by other people on the phone.
Solutions I could not find and I do not understand why that problem has occurred after the Hermes fell down, as it seems to be software-related (otherwise my mic-test would have resulted in a low-volume recording, which it did not).
Has anyone here had that problem and found a solution?
Well, I've solved the problem, although not by the means I originally wanted to. I just did a recovery of a Backup from before the day the Hermes fell down and voila - everything works again as it should (although I still don't get it how the phone falling down can change the SOFTWARE, but hey, as long as it works).
Again we see the importance of regular backups.
I had this problem before. tried to fix it but didn't work. Flashed all sorts of roms, all didn't work. Even newly flashed roms still had this problem.
Headset is fine
but just speaking into the mic isn't.
Same as you, recording works fine too, but mic to phone just doesn't work. I am curious how did you dissasemble your phone though, do you have a manual or something?
I had this problem before. tried to fix it but didn't work. Flashed all sorts of roms, all didn't work. Even newly flashed roms still had this problem.
Headset is fine
but just speaking into the mic isn't.
Same as you, recording works fine too, but mic to phone just doesn't work. I am curious how did you dissasemble your phone though, do you have a manual or something?
Hi again,
Well, the problem's back again. Even after resetting the Hermes at first it worked fine, but later people complained again that my voice was too low. So it seems that the problem is first solved by resetting/backup recovery, but then reappears. Don't know how that is possible, but I fear that it is indeed hardware-related.
Has anyone any suggestions as to what I can do?
Am I right in assuming that the hole next to the one for resetting the phone is for the microphone? Because when I dismantled my Hermes the corresponding part did not look like a microphone at all. Here's a picture of what I am talking about:
Is the part where the black rubber-thingy (circled below) that easily falls off when dismantling is placed over the microphone?
As for the dismanteling, go there:
http://www.mikechannon.net/page1.html
and search for "Hermes", there are some nice guides there.
I appreciate any hints that could lead to me solving this problem.
Update:
I've been searching for corresponding Registry Entries and so far have found these:
HKEY_CURRENT_USER/Control Panel/Phone
Changing "Vol" to 65535 increased the mic volume a little bit, but it was still too low for being acceptable (I have been testing the volume by placing my Hermes next to my PC speaker while playing an audiobook at a normal volume and calling my landline as to see how it sounds).
See also here for the thread where I found this info.
I also found these two threads:
http://forum.xda-developers.com/archive/index.php/t-260171.html
http://forum.xda-developers.com/archive/index.php/t-256734.html
My Values at HKEY_LOCAL_MACHINE\SOFTWARE\HTC\AUDIOGAINx were originally at 18 and 19. I changed them first to AA and this did, or so it seemed, increase the volume more notably. Changing the Values to CC however changed little compared to AA (although this should make the mic even louder). I may be mistaken, but I even think that the quality was better with AA.
I am not familiar with the actual volume of the mic at the receiver's end, but in my opinion the volume was pretty ok. I will call a few of the people who have been complaining and see what they have to say about the volume.
Update:
I just called my brother and he said my voice was as low as before, so my modifications had no effect.
Next thing I will try is to totally disassemble my Hermes and put it back together so to check every connection that might have gone loose.
Update: Dismantled it totally (except for the screen part) - didn't help either.
Seems like there is no solution to this problem. Most likely I will have to get a replacement. This sucks.
HI
Exactly the same problem here.
(No phone audio but Note recording & Headset works fine)
Only the phone was not dropped. Just happened !
Did a reset but did'nt wok either !
Phones in great condition.
Like you though it was a Software Issue
How much was a new mic ?
Can it be economically soldered on ?
Is there no solution whatsoever ?
Please keep me updated
Many Thanks
Sampler100
Hi Sampler,
In the end I found no solution to my problem. Got myself a Vario III and am using that one ever since.
Please let me know if you find anything that can solve this.
Greets,
Cartman
Some of these problems (I don't say all) may be caused by damage to the mini USB port and the fine wires inside it. The port has wiring related to sound both earpiece and Mic. As you know connecting a handsfree headset cuts off the Mic and earpiece, so you can see that damage to the port or bend pins inside it can cause Mic problems. This may be why sound recording is fine, but in phone mode the Mic is cut off.
I say this only to avoid the assumption that the Mic is damaged (it may be), but it can also be the port and associated wiring that causes the problem. If you are dismantling check the solder contacts around the USB port for cracks and also for bent pins in the socket.
Mike
Has anyone dealt with a dead mic ?
One day out of the blue on 4.4 mic stoped working.
Installed L 5.1. beta 3 and the mic still seems dead (Calls and Google voice) HOWEVER in sound recorder the mic works (picking every single sound) ...
Further more installed the HiQ Mp3 recorder which apparently can use front and or back mic and it works in all configs .(front back and stereo)
Tried different values via engeenering mode with no luck ....
****** Apologies to all this post was misplaced in this forum *********
I guess I should replace the charging board alltogether however I am puzled that the recordings come out clean ......
Anyone with a similar experience ??
(btw sound on wired headset is fine ... bluetooth sound is broken I think due to beta since the bt headset and speaker I tried didnt work)
Phone is Jiauy S3A
Ok Results
The issue was a dead mic (low mic) or rather a near dead mic.
Replacing the mic (on the same board ) resolves the issue (note that you can use third party mics i used asamsung one)
Best test to realise where is the fault
Open the camera recorder and start recording
Close the top mic hole with your finger, start talking in the lower mic and in the end gently (very gently) blow towards the hole.
Repeat on the top hole with the lower hole closed
After that listen to the video
If there is a problem with a mic the voice might be heard but the blow will be almost inaudiable in the problematic mic.
I have exactly the same problem - mic works fine on sound recorder and on the video camera, but Google Voice Search and using the phone does not (I've tried your blow test and it's all fine). This surely cannot be a hardware fault, can it ?
I've tried updating to LL5.1 beta3, but same problem. I've fiddled with the audio settings in the engineering menu, using a variety of values, and turned off the noise reduction without any success.
Any ideas ?
clayts450 said:
I have exactly the same problem - mic works fine on sound recorder and on the video camera, but Google Voice Search and using the phone does not (I've tried your blow test and it's all fine). This surely cannot be a hardware fault, can it ?
I've tried updating to LL5.1 beta3, but same problem. I've fiddled with the audio settings in the engineering menu, using a variety of values, and turned off the noise reduction without any success.
Any ideas ?
Click to expand...
Click to collapse
Google voice was the main indicator that the mic was bad ....
Do the blow test again and try as "gentle" as possible and then compare the results, if the uper mic is louder then then mic is dead or nearly dead.
Most probable that you ll need to change your mic
Thanks for your help - can you provide a link to the replacement mic you used (or did you use one from an old phone) - and is it easy to replace ?
Unfortunately I did go to a service shop for the repair, so I dont have a model number, all I know is that he proposed two different types, one was a noname and the other one was made by samsung (so my guess is that any samsung service center can sell you one) .
The process took about half an hour, unsoldering the old mic and soldering the new and the cost was 10 euros ( around 11 USD)
Sorry I couldnt be any more helpfull on that.
I found that, after video recording with stock camera app, main mic stop working for calls. only upper mic working. you can test it with 2 phones in both hands. but I was find simple solution: many people holding phone when taking pictures so the controls are on right side. but if you turn you phone so the shutter button will be on left side, after video recording, main mic still working!!! btw. if you like to take a shoot with control button on right side, just after you finished, turn your phone for 180° and make one more shoot, just to save your main mic for calls. no reboot needed after this action. tested on many roms, KK or LP, happend with all roms and stock camera. so problem is with stock camera app and sensor that give the information to phone to disable main mic.
Well mine was definitely a hardware fault - got a replacement lower board (USB/mic/speakers) and replaced it myself - all good again.
I think i've got the answer. The lower mic is broken for some of us. When we got to the camera app and take a video and turn the phone around it will indeed change the mic and then will use the upper one (still working) in future calls. This is why you can then be heard after when you call someone, but you'll be using the upper mic and the lower mic is still broken. Once your reboot you have to redo this. I'd like to buy a new board (usb + mic) but we cannot find any on internet anymore. Except some sellers on Ebay who are selling it from 150 dollars to 900 dollars (no joke). I guess i don't have much solution except doing that trick and use the upper mic and then try not to reboot the phone.
Hello everyone, I've checked the forums and I've not really seen many answers to this question as it's something that's been bugging me for a while now.
I don't know when it started, but I noticed recently after recording a video and playing back, the sound on one side is completely gone. Almost like Stereo mode has been disabled, I have determined that it is the microphone that is often used during Loudspeaker calls, I tested this by placing a call to a friend on a regular call, then a WhatsApp Call, and finally a Skype call - and each platform is having the same issue - my loudspeaker microphone is not picking up audio. Is there a fix for this? I took apart the device, cleaned thoroughly but I'm wondering if the microphone itself has become busted. If anyone has a similar issue, or has found a fix for this - could you please provide me with some information? I love my Note 3 and would love to start recording some videos again.
Thanks everyone!
Ginger Bearded Guy
Ginger Bearded Guy said:
Hello everyone, I've checked the forums and I've not really seen many answers to this question as it's something that's been bugging me for a while now.
I don't know when it started, but I noticed recently after recording a video and playing back, the sound on one side is completely gone. Almost like Stereo mode has been disabled, I have determined that it is the microphone that is often used during Loudspeaker calls, I tested this by placing a call to a friend on a regular call, then a WhatsApp Call, and finally a Skype call - and each platform is having the same issue - my loudspeaker microphone is not picking up audio. Is there a fix for this? I took apart the device, cleaned thoroughly but I'm wondering if the microphone itself has become busted. If anyone has a similar issue, or has found a fix for this - could you please provide me with some information? I love my Note 3 and would love to start recording some videos again.
Thanks everyone!
Ginger Bearded Guy
Click to expand...
Click to collapse
First factory reset and check again. .if same it s material problem
I've Factory Reset about 10 times since this post, and attempted all kinds of different things. I can confirm that it is a definitely a hardware issue, could you recommend what to do so I can get this fixed? Again, my primary microphone works fine while making calls - it is only when I enable Loudspeaker that the other party is unable to hear me due to the "Top Microphone" on the device not working for some unknown reason. Again, I've attempted cleans, fixes etc - but the issue only occurs during loudspeaker calls and when recording video as the top microphone is used with the primary microphone for Stereo Recording.
I know the microphone still picks up some form of audio but at a very low level - as I have called a friend and enabled loudspeaker and continued on to blowing in the hole where the microphone is situated. They can hear the loud distortion created by the air, but not a voice or anything like that. I really have to shout (And I mean LOUD) if anything audio is to be picked up.
Hello, i have a galaxy n900v, the problem with my phone is that my external speaker died and i couldnt hear it ringing. So i had it rooted and installed "Aspire S9 Rom v10 PX2" custom rom and somehow managed to use a sound mod to allow all sounds to be output from the front speaker. It worked for a about a month, and i could listen to all my voicenotes, music and calls through the front facing speaker. It also worked well when i pluged in my headset. However, as of a week ago it started to stop working, i mean, no sound whatsoever. I couldnt even hear anything through the front speaker, no calls, no voices, no music, nothing even when the headphone was connected it didnt shoe the headset connected icon. So i tried to revert back to the stock rom thinking it would work cos i had only calls on my stock rom. However, the stock rom cant detect the headphone and i cant hear anything when i make calls. I dont know if the previous mod blew my front speaker. I did some googling around and i cant find a solution that fixes my phone. Please help
HI guys, please help me with my LG V20 VS995
Internal microphones (i tested them individually) works when using a recorder app.
Recording is loud and clear but when i call anyone, they cant hear anything.
External mic with headphones does work.
Things i did:
Factory reset. Clear cache, different firmware, root, no root etc ,nothing helps.
V20 has 2 built in microphones. Tried to swap, leave one attached or another no change.
Replaced phone jack with brand new, no change.
Soldered brand new microphone or swapped with the one from the top, no change.
Re-seat chip thats located near bottom microphone, assuming it has anything to do with it.
Few days ago after i soldered another microphone, it started to work and then it stopped working not sure when, maybe after i dropped the phone ?
I am running out of ideas.
I dont understand why when using app, voice is loud and clear but when i call, no one can hear me.
As if there is some kind of switch somewhere that activates ONLY when call is placed.
UPDATE:
I performed another test today by calling my self from skype.
When i steadily buzz directly into the microphone, the voice i head in skype is pulsating from quiet to loud.
I resoldered the mic again, this time using little more solder around the hole and now i can it works BUT only if i talk on the speaker.
I am very confused right now as to whats causing it