Hello all
i havent used my device inwhile since i got a different phone so i wiped it and now when i start it up and it goes through attready2go but right after the first step it says settings has stopped working and i cant move on from there.
the firmware is 4.4.2 i believe and also rooted. I couldnt find any fixes online, anyone have any ideas? or a way to flash it and install a cyanogenmod so i dont have to deal with attready2go.
thanks to anyone that can help
Clean it up with Odin by flashing NB1 or whatever compatible.
Hi there,
I realy need your help on my problems with the G2 32GB D802.
I bought it on ebay and instead of getting it from GB it came from HongKong and I didn't think about it that it does not have a european ROM.
First I wanted to root and flash custom recovery and cloudyG3 rom. After rooting with ioroot and installing the TWRP I stuck in the fastboot mode. First problem I did not make a backup because I never reached TWRP. Download mode only appeared for a second an then disappeared again.
After a lot of searching I found that probably the 802autorec.apk was wrong, since I don't have a european model. So I installed via fastboot a laf.img for a D800. After that the download mode was working again and I installed different roms via flashtool2014. The installation worked again but after rebooting the phone I had a lot of trouble with it. That the reason for trying different roms as I sad befor.
First, the fingertip points at different areas of the screen but not there where you are touching the screen. So you can not reach the buttons or write on the keyboard.
Second, after connection to pc I recognized that my 32GB model had only 10GB internal memory.
Finaly I can not use the phone. For me it seems that I burned my partitions and need your help to get it right again.
Please give me a chance.
Best regards an thanks for helping me.
p.s.: I tried to go to the settings menu in the phone and reached it after a lot of confusing taps on the screen. All the phones informations like IMEI and all the other disappeared. Something realy went wrong with it.
No one an idea how to get back to normal?
frankhell said:
No one an idea how to get back to normal?
Click to expand...
Click to collapse
I have the same problem. Bought LG G2 D802, wifi connection was weak. I downloaded Lg PC Suite and upgraded the system. After upgrade have the same touchscreen problem. Have tested for 5-6 firmwares, but the problem is.
Do not exactly know what firmware need to install.
Please help us.
enter enginnering mode and update the touch firmware may work for you？
frankhell said:
Hi there,
I realy need your help on my problems with the G2 32GB D802.
I bought it on ebay and instead of getting it from GB it came from HongKong and I didn't think about it that it does not have a european ROM.
First I wanted to root and flash custom recovery and cloudyG3 rom. After rooting with ioroot and installing the TWRP I stuck in the fastboot mode. First problem I did not make a backup because I never reached TWRP. Download mode only appeared for a second an then disappeared again.
After a lot of searching I found that probably the 802autorec.apk was wrong, since I don't have a european model. So I installed via fastboot a laf.img for a D800. After that the download mode was working again and I installed different roms via flashtool2014. The installation worked again but after rebooting the phone I had a lot of trouble with it. That the reason for trying different roms as I sad befor.
First, the fingertip points at different areas of the screen but not there where you are touching the screen. So you can not reach the buttons or write on the keyboard.
Second, after connection to pc I recognized that my 32GB model had only 10GB internal memory.
Finaly I can not use the phone. For me it seems that I burned my partitions and need your help to get it right again.
Please give me a chance.
Best regards an thanks for helping me.
p.s.: I tried to go to the settings menu in the phone and reached it after a lot of confusing taps on the screen. All the phones informations like IMEI and all the other disappeared. Something realy went wrong with it.
Click to expand...
Click to collapse
I now have the answer from the dealer that my G2 has the Firmware D80220B.
Just try and test it. Good luck.
@Angryyolk
I just ask myself how to enter engeniering mode?
Thanks for your help.
I walked one step forward now.
But there is still no solution for my problem. I found a link to LG "http://csmg.lgmobile.com:9002/csmg/b2c/client/auth_model_check2.jsp?esn=IMEI" to get the information about the version of my stock ROM. Just replace IMEI by your real number and you will get it.
In the meantime I flashed the rom with flashtool but the screen behaviour is still the same.
I later rooted the phone with towleroot and then installed the correct autorek.apk for the D802. That worked properly. I reached TWRP but in fact of the weired screen behaviour I couldnt do something. I tried to fix my IMEI problem with QPST but this tool showed only empty tables on my PC when I connected my G2 with usb.
I tried an update of the screen firmware as posted above. The code that has to be entered on the dialer is 3845#*802# but it wont work for me since I can't enter "settings" the service menu. That's because of the weired behaviour.
Beste regards
I now was able to enter the hidden menu. And I was able to get to the menu point "update touch firmware" but nothing happend.
What is wrong?
touch screen problem
The same problem occurred on my phone. how did you do it. please help.
I installed the software and touch screen freaked out.
It's because its a Refurbished Models..
You have to check your Mother board for exact Model
Sent from My LG G Flex LG-F340K Stock KitKat V20D on LTE Network using XDA Free Mobile app
Hi all, hope you can help me. I've tried searching on the internet but no-one seems to be having any problems like mine. and my phone is now near enough bricked.
So i bought a LG G2 D802 from aliexpress, all working fine but no 4g lte option for some reason. Had a look around and seems updating to stock europe rom would have sorted this so i thought id do this.
So Updated the rom using flashtool2014, downloaded lg usb drivers, the europe rom D80220D_00 and lgmobile support tool. Went through the process and it all ran fine with no errors completed 100%and then said done pressed exit and disconnected phone.
Now, switched phone on . Straight away touch completely messed up click on the screen and different parts keep of the screen keep clicking. Eventually after 15mins managed to get out of the startup where it asks for wifi settings etc so i could try to factory reset. No luck even out of startup have not yet managed to get to the screen for usb debugging yet due to random screen clicking (keeps opening other apps, screens).
I cannot rerun the flashtool as i cannot enable usb debugging or even switch away from charge only to pc softwarw and it just says phone not connected on the flashtool and keeps ending.
Switched off by holding power button for long time. Holding down the down button and power does nothing just keeps restarting when i eventually let go.
Also sim is in phone but it says service disabled?
Any ideas how i can fix the phone! All was working fine before I did the europe rom update
Thanks
Jon
You can connect a mouse via otg and navigate to usb debug
Sent from my SM-N910H using XDA Free mobile app
Maybe try factory reset and just use mobile support tool update stock rom?
Sent from my LG-D803 using XDA Free mobile app
I would just use a wireless keyboard with an otg cable like sugested before
Sent from my LG-D805 using XDA Free mobile app
I eventually managed to select lg software as connection mode and flashed to another firmware but exact same issue again.
After trying for ages and opening the wrong thing again and again i managed to get to the screen in settings to click 5 times to enable developer options however now the screen just freezes and then you get a message saying settings has stopped working and phone locks up. This has happened 3 times since. Doesnt seem like anyway to get it sorted if i cant enable usb debugging.
Also it seems to be that the firmware change has erased the imei and that is what is causing all these problems. I found one site that details how to restore but once again you need usb debugging enabled.
Droidview has the page where you have to backup and restore imei, i dont have a backup so will need method 2. If i can get usb debugging enabled that is!
JON-JAY said:
I eventually managed to select lg software as connection mode and flashed to another firmware but exact same issue again.
After trying for ages and opening the wrong thing again and again i managed to get to the screen in settings to click 5 times to enable developer options however now the screen just freezes and then you get a message saying settings has stopped working and phone locks up. This has happened 3 times since. Doesnt seem like anyway to get it sorted if i cant enable usb debugging.
Also it seems to be that the firmware change has erased the imei and that is what is causing all these problems. I found one site that details how to restore but once again you need usb debugging enabled.
Click to expand...
Click to collapse
Try using onscreen phone maybe you could manage to set that up and then enable usb debugging?
.::.LG G2 D803.::.
.::.CLOUDYFLEX 2.7.::.
thanks for all the help, lg on screen just didn't work for some reason wouldn't connect to the phone. Was thinking about a otg cable but after an hour of clicking again and again I managed to get the developer options and usb debugging enabled.
I went through the procedure at droidview to restore imei using qpst but after finding the com port it says no phone detected so theres nothing more I can do, looks like I just have to accept this brand new brick lol.
Anybody know anywhere in London that does repairs like this, I have tried a couple of shops in London Victoria near work but they couldn't do anything. Apparently theres something called an octoplus/octopus box that can fix LG G2 imei or flash firmware.
Thanks again for everyones suggestions. .
Jon-jay, I have the same issue. I tried the "easy" kdz flash and tot flash and basically bricked my phone. The phone turns on but the screen is calibrated incorrectly like you describe so I can't click anything without trying over and over. I click one area of the screen and another is activated. I can pull down the notification pane but can't click anything in there. The phone is in a boot loop too if I don't touch it. I also want to turn on USB debugging so I could try to restore with adb or fastboot. I will let you know if I find anything.
Yeah very tricky to fix this phone after flashing. Ive flashed loads of lg phones with the flash tool and never any problems until now. Ive currently sent to a shop in south wimbledon who quoted me £50-£80 for repair if he could fix it. I dropped it off on mon and still no response so im not holding my breath. It seems this phone will be going to the recyclers if he cant do anything.:crying:
JON-JAY said:
thanks for all the help, lg on screen just didn't work for some reason wouldn't connect to the phone. Was thinking about a otg cable but after an hour of clicking again and again I managed to get the developer options and usb debugging enabled.
I went through the procedure at droidview to restore imei using qpst but after finding the com port it says no phone detected so theres nothing more I can do, looks like I just have to accept this brand new brick lol.
Anybody know anywhere in London that does repairs like this, I have tried a couple of shops in London Victoria near work but they couldn't do anything. Apparently theres something called an octoplus/octopus box that can fix LG G2 imei or flash firmware.
Thanks again for everyones suggestions. .
Click to expand...
Click to collapse
Check out the thread lg g2 is unbrickable now, it involves shorting a couple capacitors to unbrick but its ingeneious. I bet itll help you out.
.::.LG G2 D803.::.
.::.CLOUDYFLEX 2.7.::.
the plot gets thicker...
okay so it has been a few months now and I revisited the phone sitting around. This is how I got on:
I gave the phone to shops in London, no-one could fix it got it back first week of Jan. So I thought I'd retry myself.
One guy told me that the imei may be for D802 but the screen and insides of the phone is a d800 model.
That makes sense as the touch works erratically. This was a refurbished phone I bought from aliexpress which claimed to be a EUR D802 but after I took the back cover off it says D800\d801\d803 inside on a lot of the flex connections and at the bottom of the plastic it says d800. I downloaded the AT&T stock rom and flashed with octoplus - touch worked perfectly! but phone kept restarting itself and looping really badly so I put in download mode and went back to D802 uk firmware - and touch not working again.
(Prior to this I bought the octopus box also in the hopes that restoring the imei I had previously lost will somehow be related to the screen.
This worked in restoring imei only and I have restored the d802 imei with octopus box)
Anyhow I then flashed stock uk firmware on the phone so everything in the phone works perfectly fine except the touch! so I am controlling touch with otg cable and mouse.
my next thought was install a d800 custom rom it will fix the touch! Now I then rooted, and installed d802 autorec.apk. I came on xda and downloaded a d800 stock custom rom (D80020k) from the AT&T subsection and thought I'd install this through twrp. All though the custom rom says successful when I reboot it comes to fastboot mode again. so I then go about restoring the stock d802 firmware. I installed d800 autorec.apk but that too send to fastboot mode.
So I am lost. Everything working perfect except the touch. Any ideas anyone? Im hoping some one says there is a stock lg custom rom that has all the screen settings for d800/01/02/03 which will sort my problem!
What it seems is the chinese company selling the refurb has somehow managed to get a d802 imei on a d800/01/03 not entirely sure how this is possible either!
JON-JAY said:
What it seems is the chinese company selling the refurb has somehow managed to get a d802 imei on a d800/01/03 not entirely sure how this is possible either!
Click to expand...
Click to collapse
What they're doing is flashing a d802 system.img with otherwise d800/01/03 firmware.
I saw a thread in the T-Mobile G2 area saying to get d802 on your d800/d801 you just flash a custom d802 rom and then a d800/801 kernel but this causes my phone to go back to fastboot...still lost! the custom rom works fine itself (Except for touch again!)
JON-JAY said:
I saw a thread in the T-Mobile G2 area saying to get d802 on your d800/d801 you just flash a custom d802 rom and then a d800/801 kernel but this causes my phone to go back to fastboot...still lost! the custom rom works fine itself (Except for touch again!)
Click to expand...
Click to collapse
There is a way to get them back to their original frankenphone state but it's quite a procedure. Flash d802 firmware. Use a otg usb mouse to navigate since it'll have touch issues. Root and install custom recovery using the actual hardware as your guide to which twrp version to install. D800 in your case. Do a nandroid backup. Move the nand backup to your pc for safe keeping. Now install d800 firmware using a hex edited tot to allow it to proceed and a generic dll to avoid cross dll issue. Root, install twrp again. Move twrp backup from pc to phone. Do a restore but only restore the system.img. Now you have firmware that cooperates with d800 hardware while appearing and acting like a d802 in every other way.
The other thought I had but have not tested yet would be to flash d800 firmware right off the bat, then root and install twrp. Then use dd to flash system.img to it's partition ( /dev/block/mmcblk0p34 ). I'm not sure how that would work due to the very large size of the system image. You'd have to extract it from the kdz. Because it's so large when it's extracted, it does it in parts so it must be merged back together to make one file. But if it did work, it'd save the step of having to root/recovery twice on two separate firmwares.
I'm in a bit of a pickle with my stylo 2 plus (tmobile k550)
back in 2016 sometime i rooted my phone and everything was fine and working properly, i was able to do everything i wanted to do. For a while now i've been wanting to restore my my phone back to it's original de-rooted state but the thread i went to for the rom indicated that if i used a tmobile phone it may sim lock it to metro pcs which i didn't mind and i took a gamble on it and followed the instuctions i used LGUP and installed it and everything was going fine even shows me the metropc logo/animation on startup but it gives me an error with the IMS that it was unable to start and i'd close the message and it would just pop back up and i was not able to do anything else. on top of that when i installed the rom i opted to not keep twrp installed . that was a mess that took me a better part of the day to figure how to get back on the phone but i cannot use LGUP with a proper KDZ file as every time i try to run it it tells me that my phone is a MS550 and won't install because the KDZ file is for a K550, i also tried LG Flash Tool 2014 and it analyzes the phone go up to 30% jumps back to 25% then says "Required info cannot be found." and just below that it says "Contact the system administrator.."
I've tried practically every suggestion i could find via google and youtube (man alot of those videos were repetitive broken records to boot)
if someone could please help me with this problem i'd greatly like to restore my phone back to it being seen as a k550. (i really cannot afford to buy a new phone at the moment and really like this one)
thanks for taking the time to read this.
Edit: I went into twrp and did a wipe and the IMS error is now gone and i can access the metropcs version of this phone but i'd still love to get the tmobile rom back on here if possible.
Edit2: After a little more searching I realized i am blinder than i thought and found another non-kdz stock installer for the k550 was able to restore my phone fully. thanks for anyone that stopped by and took time to read this.
I want to put this Samsung SM-T567V Verizon tablet back to its original factory state, without the software the previous owner used for work, but I think I'm missing something. I've located the factory ROM and downloaded it. I boot the tablet up in odin mode. Start Odin in administrator mode on my laptop. Connect usb cable and recognize the tablet. Choose AP and locate the ROM file. Run the flash. Odin completes and says "PASS". Disconnect the tablet from my lappy and it reboots. Runs all of the normal setup screens as if new (language, email accounts, etc) and finally gets to a home screen. Then about 90 seconds later, it forces me to go through an install for some "Brookdale" program that I'm guessing the previous owner used for work. Once that is done, I see in the Apps section MobiControl and also Knox Mobile Enrollment Service (both mentioned during this last install), but nothing for Brookdale. Its really been driving me crazy! I've searched and searched but I cannot find any help or a solution anywhere. I don't want the previous owners company to think I'm trying to hack into them and I certainly don't want them accessing me either!
So I guess my questions are:
1. Are the MobiControl and Knox apps remnants of the previous user or are they actual factory programs?
2. If these are from the previous user, why wont they get wiped out when I flash the tablet? (I cannot uninstall them either)
Please help!!!
Thank you for any info you can share with me!
Mike
Hi ?
Hi,
I read your post and I have the exact tablet and have the same issues.. I was wondering if your ever got it resolved ?