Samsung Galaxy Core 2 GT-355HN restarting after install firmware - Samsung Galaxy Core 2 Questions & Answers

I have a problem after the update via OTA, the phone will restart and stayed on the logo Samsung Galaxy Core 2 GT-355HN.Nakon return phone software again restarts and does not respond to touch when you boot the system stand for 1 minute and again restarts sam. I worked in the Recovery and wipe cache, and again restarting and does not respond to touch. I installed several software for Southeast Europe because it says Recovery SEE.I writes that HEAD INFO DONT UPDATE'FAIL, everything else is good,what to do?

Related

[Q] Semi-Bricked Rogers Tab

Hello All,
I own a Rogers version of the Samsung i900M series Galaxy Tab. It was originally flashed to use European PDA and the Bell Modem for wireless radio access. Things worked fine until I decided to re-flash to more recent firmware
P1000XXJM6. The flash seemed successful and the unit rebooted to another download screen, waited for another reboot but nothing, so unplugged it and reset. When reset, it comes up with opening Samsung screen, then with the words SAMSUNG which flash forever in a loop with 1 vibrate, then a dual vibrate, then repeats. Have tried re-flashing to other firmwares with similar results. Also, reset the unit with vol + and pwr and cleared cache, cleared all data and factory reset.
Quite stuck with this one, can anyone offer any assistance / advice on this?
Thank You in Advance !

Auto rebooting

Dear all
i have problem my phone is freezing and rebooted automatically
still in Samsung logo i downloaded new firmware for him but still in same problem
i downloaded firmware 4 file and complete software after that freezing in install update system
i make wipe data / rest factory and still freezing in logo
i install custom recovery & reooted
i install custom roms
i repair by smart switsh still freezing in logo
When I do not use the phone for a day
And after working for 20 minutes and come back to the same state (freezing in logo)
I'm tired, can you help me
My phone Galaxy S7 Edge SM-G935FD duos

Can't open phone after factory reset

Today I got bluescreen on my S4, then the phone restarted on its own. After that, every time it was restarting, after 5-10 seconds, it immediately started freezing and restarting on its own (like an infinite loop). Couldn't find any solution since the phone can't even stay on for more than 10 seconds, I went into recovery mode and used wipe data/factory reset. On the recovery mode, the phone didn't restarted, I left it for more than 10 minutes and it didn't restarted so I don't think it's a hardware problem. However after wiping it and then rebooting the phone, it doesn't boot and just stays on with a blackscreen (nothing shows off), sometimes it restarts on its own but it doesn't even boot into the operating system now.
I haven't installed any custom roms, I don't even have rooted the phone. I tried installing the stock rom/firmware via KIES however it said that my S4 does not support initializing (tried both KIES and KIES3). So I downloaded Odin however I don't know where to download the right stock rom/firmware. Any help?
GT-I9505 (I was using the latest update 5.0.1 (when I did factory reset)).
FCC: A3LGTI9505
SSN: -I9505GSMH
Shunten said:
Today I got bluescreen on my S4, then the phone restarted on its own. After that, every time it was restarting, after 5-10 seconds, it immediately started freezing and restarting on its own (like an infinite loop). Couldn't find any solution since the phone can't even stay on for more than 10 seconds, I went into recovery mode and used wipe data/factory reset. On the recovery mode, the phone didn't restarted, I left it for more than 10 minutes and it didn't restarted so I don't think it's a hardware problem. However after wiping it and then rebooting the phone, it doesn't boot and just stays on with a blackscreen (nothing shows off), sometimes it restarts on its own but it doesn't even boot into the operating system now.
I haven't installed any custom roms, I don't even have rooted the phone. I tried installing the stock rom/firmware via KIES however it said that my S4 does not support initializing (tried both KIES and KIES3). So I downloaded Odin however I don't know where to download the right stock rom/firmware. Any help?
GT-I9505 (I was using the latest update 5.0.1 (when I did factory reset)).
FCC: A3LGTI9505
SSN: -I9505GSMH
Click to expand...
Click to collapse
The stock firmware can be downloaded from sammobile.com.
I recommend using the original cable and connecting it to a rear USB port to ensure the chance of a successful flash.
Pwnycorn said:
The stock firmware can be downloaded from sammobile.com.
Click to expand...
Click to collapse
That's the problem, it's the first time I'm using Odin so I'm kinda newbie. I don't know which one to download from this list.
http://forum.youmobile.org/downloads/?cat=45
I even looked on this but still:
http://www.sammobile.com/firmwares/database/GT-I9505/#firmware
Or all of these are the same and it doesn't matter which one you download?
I should be looking for I9505GSMH, right? Because I can't find it on these 2 sites.
Shunten said:
I should be looking for I9505GSMH, right? Because I can't find it on these 2 sites.
Click to expand...
Click to collapse
No. There is no such thing.
Type in your phone model, select your country and carrier, and download the latest one.
GT-i9505 firmware is here: http://www.sammobile.com/firmwares/database/GT-I9505/

NOTE 4 N910F Bootlooop, Shuts down, Blue Light

Hi
I am stuck with Pulsing blue LED and the "Powered by Android" screen,
have access to both the recovery and the Odin Mode,
I also have Odin (version 3.13) on my computer along with TWRP (3.1.1 trlte and 3.2.1 version)
My device is a Samsung Galaxy Note 4 N910F bought in shop, no special carrier. It was bought in Belgium.
I have tried everything that I have read. The furthest that I can go is the Second Samsung Logo with the Flashing Light
Whenever I try to Flash the stock Firmware for my N910F, everything goes well in Odin but then when the phone reboots, it (sometimes) install the system update until 30% then shows erasing then either crashes right there and then or load the system update bar, completes it then shuts down.
In between I do perform a wipe of the cache and factory reset of course. (in both normal and TWRP recovery)
Whatever I do, at some point, my phone either gets stuck in a bootloop, freezes with the LED light or shuts down.
Oh and I can transfer files directly to the internal storage with no issue
Please help a brother out lol. I have spent the last 4 days looking for a way to fix this. To no avail.
And I have also proceeded to use different batteries.
I have the exact same problem. Doesn't anyone have an idea?
Mugiwara7 said:
Hi
I am stuck with Pulsing blue LED and the "Powered by Android" screen,
have access to both the recovery and the Odin Mode,
I also have Odin (version 3.13) on my computer along with TWRP (3.1.1 trlte and 3.2.1 version)
My device is a Samsung Galaxy Note 4 N910F bought in shop, no special carrier. It was bought in Belgium.
I have tried everything that I have read. The furthest that I can go is the Second Samsung Logo with the Flashing Light
Whenever I try to Flash the stock Firmware for my N910F, everything goes well in Odin but then when the phone reboots, it (sometimes) install the system update until 30% then shows erasing then either crashes right there and then or load the system update bar, completes it then shuts down.
In between I do perform a wipe of the cache and factory reset of course. (in both normal and TWRP recovery)
Whatever I do, at some point, my phone either gets stuck in a bootloop, freezes with the LED light or shuts down.
Oh and I can transfer files directly to the internal storage with no issue
Please help a brother out lol. I have spent the last 4 days looking for a way to fix this. To no avail.
And I have also proceeded to use different batteries.
Click to expand...
Click to collapse

Stuck on startup android

Recenty i got a phone that was stuck in a boot loop. when you boot up the phone in the top right is said [ this binary is old , update to latest binary]. After getting issue resolved trying to flash the phone with multiple different firmwares for Samsung galaxy s7 AT&T, G930AUCUACSF1 was the one that i was able to flash but whe the phone was booting up it got stuck on the startup android screen, as in it was frozen. the boot animation wasnt even working. And yes i wipe the cache and did a factory wipe and still nothing.

Categories

Resources