hey,everybody .
this is my first post here , so please excuse my ignorance .
s4 att , android 4.2.2 , baseband i337UCUAMF3 , KERNEL 3.4.0-812098 , BUILD # JDQ39.I337UCUAMF3
When connected to pc , it starts charging , put pc does not see it .
tried 10 different usb cables ( including samsung original ) , tried dial *#0808# made sure it shows mtp+adb
tried 4 different computers from windows xp . up to windows 10 , kies does not see it , odin does not see it , pc does not see it .
i put it in download mode , no change .
updated windows media player , installed google sdk , nothing !
reset to factory , several times , did it from the phone menu , and from recovery , nothing !
i put 4.2.2 on a micro sd card , went into recovery , apply update from external i get error (error in tmp/sideload/package.zip status 7 )!!!!
does not connect via adb either !!!
PLEASE HELP !!!!
You did not mention the samsung kies, smart switch in your post. Usually I use those software to check whether my pc has samsung usb driver properly installed.
Hey, thanks for reply .
But I did mention kies, it does not see it.
Installed , uninstalled , and reinstalled the driver several times , still nothing.
mhk9626 said:
Hey, thanks for reply .
But I did mention kies, it does not see it.
Installed , uninstalled , and reinstalled the driver several times , still nothing.
Click to expand...
Click to collapse
It is hard to tell. It could also be assume that your usb port in the phone has a problem. Then again, you mentioned that when you plugged the phone in, it is charging.
I am sure you'd already ticked the usb debugging option in the developer mode.
Have you tried smart switch. When I upgrade my phone to lollipop kies does not detect my phone and asked me to use the smartswitch instead.
sway8966 said:
It is hard to tell. It could also be assume that your usb port in the phone has a problem. Then again, you mentioned that when you plugged the phone in, it is charging.
I am sure you'd already ticked the usb debugging option in the developer mode.
Have you tried smart switch. When I upgrade my phone to lollipop kies does not detect my phone and asked me to use the smartswitch instead.
Click to expand...
Click to collapse
tried smart switch too , nothing !!!
Sounds like the USB port of flex cable may be damaged.
audit13 said:
Sounds like the USB port of flex cable may be damaged.
Click to expand...
Click to collapse
you were the only one who tried to help . so , many thanks !!
No worries, we're here to help and learn from each other. Did you have an opportunity to try any other possible solutions? Do you have access to another flex cable?
Related
since around a week ago my phone has not been able to connect to the usb ,
it does still charge via usb cable from the pc but the cable is not detected for mass storage ,kies or usb debug .
i know drivers are ok on pc as my wifes phone still connects fine .
is there any way to test that the usb socket is broken internally
i am haing same prob here after flashing a rom
just backing phone up with clockwork mod then going to do a factory restore to see if it cures the problem ,dont think it will but i can but try . device doesnt even go into mtp ? mode .
even in clockwork recovery when the usb is mounted as mass storage it isnt detected
well tried that no success , cant send phone back as cant factory restore it as i cant connect to odin. by the way what rom are you running and what version of galaxy have you got 8gb or 16gb
jona29 said:
just backing phone up with clockwork mod then going to do a factory restore to see if it cures the problem ,dont think it will but i can but try . device doesnt even go into mtp ? mode .
even in clockwork recovery when the usb is mounted as mass storage it isnt detected
well tried that no success , cant send phone back as cant factory restore it as i cant connect to odin. by the way what rom are you running and what version of galaxy have you got 8gb or 16gb
Click to expand...
Click to collapse
Have you tried the debugging mode?
EDIT : Try installing the usb drivers from my signature.
ive tried debugging mode no different , i can even select - deselect usb debugging whist the usb cable is connected .
the usb drivers from your sig are for windows x64
my wifes galaxy s is detected by the computer fine ,same usb cable and port
jona29 said:
ive tried debugging mode no different , i can even select - deselect usb debugging whist the usb cable is connected .
the usb drivers from your sig are for windows x64
my wifes galaxy s is detected by the computer fine ,same usb cable and port
Click to expand...
Click to collapse
What OS are you running?
windows 7 32 bit
galaxy s 16gb with darkys v8 gingerbread (previously darkys version 6)
Can't you get hold of a friend's usb cable?
hi i have multiple usb cables here 2 original samsung galaxy cables plus multiple other micro usb cables . non of which work with the phone . not to sound ignorant but dont you think i have tried the obvious things first ?
Try a wipe/reset
If that doesnt work, try an other rom .... Stock or non-darkyy
If that doesnt work, im afraid there is a hardware problem
Sent from my GT-I9000 using XDA App
Cypher_X said:
Try a wipe/reset
If that doesnt work, try an other rom .... Stock or non-darkyy
If that doesnt work, im afraid there is a hardware problem
Sent from my GT-I9000 using XDA App
Click to expand...
Click to collapse
You are funny, their phone is OK, the CABLE doesn't work. Right?
jona29 said:
hi i have multiple usb cables here 2 original samsung galaxy cables plus multiple other micro usb cables . non of which work with the phone . not to sound ignorant but dont you think i have tried the obvious things first ?
Click to expand...
Click to collapse
DID you try to put a RIGHT cable into a WRONG hole???
You are not alone, I have exactly the same problem, but wrote it off as a hardware problem, because it started after my son (9 months and teething) gnawed on the phone for some time...
Sent from my GT-I9000 using Tapatalk
ok tried different roms etc no luck must be hardware related going to open the phone tomorrow and check the usb socket . only really worried incase i need to use odin to recover after a bad flash , or incase the usb decides to die completely and i cant charge the phone
jona29 said:
since around a week ago my phone has not been able to connect to the usb ,
it does still charge via usb cable from the pc but the cable is not detected for mass storage ,kies or usb debug .
i know drivers are ok on pc as my wifes phone still connects fine .
is there any way to test that the usb socket is broken internally
Click to expand...
Click to collapse
Hey Jona29 i had the same problem some time ago i solved it by changing usb port (preferably one direct to motherboard) while pc is off then start it while in download mode and flash with odin.
Good luck bud, i know how frustrating it is
UPDATE ! fixed the phone ,yes it was hardware not software at fault . dissasembled the phone and removed the board with the usb connector on .
heated the board around the connector with a pyro pen to reflow the solder
let it cooled and then reassembled the phone .
powered up phone and connected usb lead ,computer recognised phone and phone recognised usb connection
probably took me 30 mins to complete the task.
better than say a 4 week wait from samsung
jona29 said:
heated the board around the connector with a pyro pen to reflow the solder
Click to expand...
Click to collapse
Slick. I have taken my phone apart for USB problems as well, but I would be scared to try to reflow something on the PBC. The connections are so small.
I have had the USB issue as well but it always seemed to be the cooked ROM iI was using.
Ian
I had the same problem, after using DXJPA ... every time i connected the phone (even in boot mode) i received "USB device not recognized" ... I don't know what worked in the end, but i tried a lot of things: I bought a new cable (same problem), I used another computer (same problem), I tried on W7 x64, W7 x32, XP SP3 (same problem), uninstalled and reinstalled Kies, I uninstalled and reinstalled an older version of Kies, changed the phone form a computer to another, played a lot with USB ports ...
After 2-3 hours of pain, Odin saw the phone ... flash it to JPY and no USB problem anymore ...
Maybe this will help someone
mik3y007 said:
I had the same problem, after using DXJPA ... every time i connected the phone (even in boot mode) i received "USB device not recognized" ... I don't know what worked in the end, but i tried a lot of things: I bought a new cable (same problem), I used another computer (same problem), I tried on W7 x64, W7 x32, XP SP3 (same problem), uninstalled and reinstalled Kies, I uninstalled and reinstalled an older version of Kies, changed the phone form a computer to another, played a lot with USB ports ...
After 2-3 hours of pain, Odin saw the phone ... flash it to JPY and no USB problem anymore ...
Maybe this will help someone
Click to expand...
Click to collapse
have the same problem..
tried everything.. i dont dare to reflow my phone..
I have my galaxy y flashed with JellyBlast4.1 and also merruk kernel 2.5 then reinstalled stock roms because there are so many processes that appears to force stop..
after so many times I reflashed stock rom, jellyblast and merruk the phone cannot go to CWM properly...them CWM menu sometimes appear then mostly its just merruk image with the ClockworkMod Recovery v5.0.2.6 text....
I can still connect to ODIN mode but several PC cant recognize my device...it says USB device not recognized. I installed Kies old version and new version...I also tried using only samsung usb drivers not the kies packages..but still PC saya usb device not recognized...
what can I still do... I'm not able to use my phone for 3 days already...
I tried to connect and disconnect my galaxy y and connect again but I get the same response from the PC....
I also tried to do the reflashing stock rom process via ODIN on other PC's on several computer shops here in my area in Philippines but still cannot reflash stock rom via ODIN because my device cant be recognized...
I have gone to conclusion that some or a specific component of my phone is damaged already...
should I go to service center already???please I still wanna fix this problem on my own with your supports....I dont wanna spend money on service center yet... also I dont have money...im still a student....huhuhuh
Try to flash stock rom via odin on windows vista os pc or windows7 home basic os
I also faced dis prob on my windows7 ultimate os but on windows vista everytime my galaxy y get recognized
Sent from my GT-S5360 using xda premium
Check your cable (You must use factory one)
USB port : use the main
can you post SS
Try flashing a different merruk kernel and see whether the pc detects your device.
Don't do it many times as there can be chances of hard brick.
usb notb detected
miloboy05 said:
I have my galaxy y flashed with JellyBlast4.1 and also merruk kernel 2.5 then reinstalled stock roms because there are so many processes that appears to force stop..
after so many times I reflashed stock rom, jellyblast and merruk the phone cannot go to CWM properly...them CWM menu sometimes appear then mostly its just merruk image with the ClockworkMod Recovery v5.0.2.6 text....
I can still connect to ODIN mode but several PC cant recognize my device...it says USB device not recognized. I installed Kies old version and new version...I also tried using only samsung usb drivers not the kies packages..but still PC saya usb device not recognized...
what can I still do... I'm not able to use my phone for 3 days already...
I tried to connect and disconnect my galaxy y and connect again but I get the same response from the PC....
I also tried to do the reflashing stock rom process via ODIN on other PC's on several computer shops here in my area in Philippines but still cannot reflash stock rom via ODIN because my device cant be recognized...
I have gone to conclusion that some or a specific component of my phone is damaged already...
should I go to service center already???please I still wanna fix this problem on my own with your supports....I dont wanna spend money on service center yet... also I dont have money...im still a student....huhuhuh
Click to expand...
Click to collapse
Dude install samsung kies don't update try to wait give it like 5 minutes it works for me using windows 7 ultimate
its now getting detected but git stucked on setup connection on odin 1.85,,,id:com on odin has already turned yellow below with 0:[COM5]
thanks for all you that respond to mt post :good:
thankx
Mohamed.Anwar said:
Check your cable (You must use factory one)
USB port : use the main
can you post SS
Click to expand...
Click to collapse
That is very helpful n you save my phone, thankx bro
my phone samsung galaxy y GT 5360 was working just fine...then today i got an update then i downloaded it..n started installing update but it stucked at 88% for long time so i switched it off during installing..n then it is stuck on the start up logo n nothing happens futhur..n whn i connect to it to computer for odin it says unknow device unable to install drivers...pls help i followed all threads !! bt could not found any useful info ~
flash stock rom using odin
Reynaldi said:
flash stock rom using odin
Click to expand...
Click to collapse
I am facing a similar issue. Is there a solution yet ?
My Galaxy Y shows up the Welcome LOGO and goes OFF in say about 10 seconds.
I tried going into recovery mode/ download mode , but the operation lasts for only 10 seconds approximately.
Trying to connect the Phone to my PC fails with some "Unable to connect via USB" kind of a warning.
Any help is highly appreciated.
Hello!
kshashank said:
my phone samsung galaxy y GT 5360 was working just fine...then today i got an update then i downloaded it..n started installing update but it stucked at 88% for long time so i switched it off during installing..n then it is stuck on the start up logo n nothing happens futhur..n whn i connect to it to computer for odin it says unknow device unable to install drivers...pls help i followed all threads !! bt could not found any useful info ~
Click to expand...
Click to collapse
Use linux OS( in computer ) because no drivers are needed there.... :good:
BUT....
I dont know whether ODIN is available for LINUX OS...
Anyway try searching... :good:
walley0 said:
I am facing a similar issue. Is there a solution yet ?
My Galaxy Y shows up the Welcome LOGO and goes OFF in say about 10 seconds.
I tried going into recovery mode/ download mode , but the operation lasts for only 10 seconds approximately.
Trying to connect the Phone to my PC fails with some "Unable to connect via USB" kind of a warning.
Any help is highly appreciated.
Click to expand...
Click to collapse
try connecting without battery
and go into download mode
lvabarajithan said:
Use linux OS( in computer ) because no drivers are needed there.... :good:
Click to expand...
Click to collapse
Will give this a TRY. Nice clicked though
---------- Post added at 11:52 AM ---------- Previous post was at 11:36 AM ----------
sangalaxy said:
try connecting without battery
and go into download mode
Click to expand...
Click to collapse
Are you serious ? Connect it without the battery ?
Weird aah
walley0 said:
Are you serious ? Connect it without the battery ?
Weird aah
Click to expand...
Click to collapse
A usb cable carries power so you can enter download mode without the battery
marcussmith2626 said:
A usb cable carries power so you can enter download mode without the battery
Click to expand...
Click to collapse
"USB Device not recognised"
No luck.
walley0 said:
"USB Device not recognised"
No luck.
Click to expand...
Click to collapse
Make sure keis is not installed (conflicts with odin) and install Samsung drivers
Or try a different pc or Google what to do when phone not recognised - the answers are there
install samsung drivers
noo need of kies
switch off the phone
and then connect ur data cable to ur pc qnd then pressing the
volume down+home key+powerkey u will
enter into download mode ..
then ur phone will be detected by the pc..
Sent from my GT-S5360 using xda app-developers app
Use Odin/download samsung mobile usb driver.exe and restart your comp.
-Your Region Pack Select.
-Flash
Are you serious ? Connect it without the battery ?
Weird aah
Click to expand...
Click to collapse
Surely it will work... :fingers-crossed: :fingers-crossed: :fingers-crossed:
Hello everyone,
I registered and post this thread because i give up with problem i get after upgrade my galaxy s4 i9505 to jelly bean 4.3. Pc dont recognizing phone, usb cable is good because when i connecting the charging icon appears. I checked in other pc (in both there is windows 7), I download the last version of usb drivers from official site, i download the last version of Kies3 and it still no connecting. Before upgrade i havent this issue, i also checked other usb cable (both cables are original). I searching for hour any solution, activate developer options and check "usb debugging", also i wrote *#0808# and check mtp (i also tried other options, no result) or I tried launch vol down + power + home, also dont help. So i give up and now i`m hope some hi-tech wizard will tell where i making mistake...
After hours spending on wasting time with this usb connect i started to think about change soft, but here appears another issue... I havent root, and superuser. That is not a finish of trouble! I noticed that i have recovery 3e with some kind of error "e: signature verification failure" when i trying to flash any other soft or custom recovery! I searching for some tips on web, but in all options i allways impended whatever i try: when i try use Rom Manager there is error i havent su, when i try activate SuperSu there is error i havent root, when i try install CWM by MobileOdin there is error i am not su... when i try other aps like Framaroot there is error #5, also in Rom Manager i have info that my Rom doesnt support OTA, when i try change recovery file in System/bin folder by RootExplorer there is again error "u havent root"! I'll go crazy by this trap!
Anyone have any ideas? Please help me :crying:
PS. English is not my strong side. Sorry.
So... can sombody help me or this issue is too much advanced for this forum?
Again please help me.
Dude-K said:
Again please help me.
Click to expand...
Click to collapse
Can you please try to install this driver to your Pc http://uploaded.net/file/xdloq4jw , connect the cables on both side's Pc/Phone , on the screen to your phone there should be a notification(Connected as a media Device,Swipe it down and click that option, There should be MTP and Camera) Try to tick the camera first and let the driver install it and then tick MTP and let it install the driver for that as well , and Make sure to activate USB debugging. let me know. Have anice day.
I lost hope someone will respond ^^ thanks Repulsa for sugestion! But this issue is harder then i thought, I have this drivers already i download drivers from your link in spite of all. After download I re-install it, "installation succesfull finished", after that I connect the galaxy s4 with pc by original cable (the charging icon appears but nothing more ). On screenn nothing happens, nothing appears, there is no this notification that u write (only charging in right, top corner).
I checked three times usb debugging, its active. Help me please
Dude-K said:
I lost hope someone will respond ^^ thanks Repulsa for sugestion! But this issue is harder then i thought, I have this drivers already i download drivers from your link in spite of all. After download I re-install it, "installation succesfull finished", after that I connect the galaxy s4 with pc by original cable (the charging icon appears but nothing more ). On screenn nothing happens, nothing appears, there is no this notification that u write (only charging in right, top corner).
I checked three times usb debugging, its active. Help me please
Click to expand...
Click to collapse
Hi there mate , Try plugging it in to another usb port that comes off a motherboard. Don't use the front ports or usb hub. or either download kies 3 from here http://downloadcenter.samsung.com/content/SW/201312/20131204181418883/Kies3Setup.exeto see if its gonna work or not.have a nice day.
Dude-K said:
Hello everyone,
I registered and post this thread because i give up with problem i get after upgrade my galaxy s4 i9505 to jelly bean 4.3. Pc dont recognizing phone, usb cable is good because when i connecting the charging icon appears. I checked in other pc (in both there is windows 7), I download the last version of usb drivers from official site, i download the last version of Kies3 and it still no connecting. Before upgrade i havent this issue, i also checked other usb cable (both cables are original). I searching for hour any solution, activate developer options and check "usb debugging", also i wrote *#0808# and check mtp (i also tried other options, no result) or I tried launch vol down + power + home, also dont help. So i give up and now i`m hope some hi-tech wizard will tell where i making mistake...
After hours spending on wasting time with this usb connect i started to think about change soft, but here appears another issue... I havent root, and superuser. That is not a finish of trouble! I noticed that i have recovery 3e with some kind of error "e: signature verification failure" when i trying to flash any other soft or custom recovery! I searching for some tips on web, but in all options i allways impended whatever i try: when i try use Rom Manager there is error i havent su, when i try activate SuperSu there is error i havent root, when i try install CWM by MobileOdin there is error i am not su... when i try other aps like Framaroot there is error #5, also in Rom Manager i have info that my Rom doesnt support OTA, when i try change recovery file in System/bin folder by RootExplorer there is again error "u havent root"! I'll go crazy by this trap!
Anyone have any ideas? Please help me :crying:
PS. English is not my strong side. Sorry.
Click to expand...
Click to collapse
4.3 pc Drivers are different from 4.2.2. Install kies 3.
Enviado desde mi GT-P7510 usando Tapatalk 2
Dude-K said:
Anyone have any ideas? Please help me :crying:
PS. English is not my strong side. Sorry.
Click to expand...
Click to collapse
I see the problems are in Windows 7. The USB Conector seems ok. Untick "usb debugging" in ur phone and take a look this page. If dont appears nothing in the device manager, tell me it and i will give ya other solution
EDIT: Other option is:
- Uninstall completely Kies and Kies 3
- Reboot ur pc
- Download the latest version of Kies 3 (drivers are included, only tc what u select in the installation -> dont untick them)
- Conect ur phone to the pc with the USB conector and wait coz the drivers have to be installed. Till Windows dont finish of install them u dont need touch nothing. Good luck
I'm suprised that three peoples trying to help me, thats charming, thank you.
But...
Repulsa I've done what u wrote, I tried plugging s4 to another usb port, one port usb 2.0 and another usb 3.0, always was the same situation, the charging start coming but nothing more, there is no notification on phone screeon or on the pc. Also I tried do this in second pc, in 3 usb ports, but always was the same. After that I tried that what Repulsa and jaswinsky says, i re-install kies. First I uninstall in both pc kies, and i install the kies 3, I reboot my pc and I reboot my s4. Nothing new happens, only charging. Here i want to turn your attention that, I checked in both pc's my younger brothers Galaxy s2, and it havent any problems with connecting! If I plugging Galaxy s2 in this usb ports in both pc, windows 7 havent any problem to recognize phone! Kies and "My Computer" shows the device memory and its working. When I after that disconect s2 and plug in my s4 the same situation happens. Only charging icon, and nothing appears about connection.
After that i tried that what Joku1981 wrote, I untisck "usb debugging" in developer options and i checked the device manager, but there doesnt appears anything. There is not "other device" warning or anything like that. Charging icon appears but pc dont recognizing s4. I would also like to point out that, yesterday I've done with younger brother the format on one of this pc's with hope that will helps but, we format pc, reinstall windows7, reinstall all drivers, and the situation is still the same.
Please help me!
PS. I'm starting think about that the official OTA update do 4.4 will solve the issue..
Hi there !!!,windows doesn't recognize my s4 i337m in download mode (code 29), when i was flashing (stock canada 5.0.2) my cousin unplugged the cable by mistake, now i can go into download mode but widows 7 doesnt recognize anymore (tried different pcs and cables , the same), did it damage the usb port? or is hardbricked?? what can i do??? please help!!
I'm no expert on this, but you can try taking out battery. Hold power button to discharge hardware and put battery back in and see if it works. You can also try factory reset & wipe cache from recovery (Vol Up + Home + Power) and try again.
Your phone at least goes to Download mode so that's good sign I guess. You're using ODIN to flash 5.0.2, right?
Wait more experienced person to answer, though.
xymic said:
I'm no expert on this, but you can try taking out battery. Hold power button to discharge hardware and put battery back in and see if it works. You can also try factory reset & wipe cache from recovery (Vol Up + Home + Power) and try again.
Your phone at least goes to Download mode so that's good sign I guess. You're using ODIN to flash 5.0.2, right?
Wait more experienced person to answer, though.
Click to expand...
Click to collapse
Thanks bro, but i did what u said and it's still not working, the problem here is that windows does not recognize my s4 (usb port: unknown device, code 29) , yes i'm using odin to flash, but i can't flash until my device be recognized, that's why i need to know if my device's usb port is damaged?
maomloco said:
Thanks bro, but i did what u said and it's still not working, the problem here is that windows does not recognize my s4 (usb port: unknown device, code 29) , yes i'm using odin to flash, but i can't flash until my device be recognized, that's why i need to know if my device's usb port is damaged?
Click to expand...
Click to collapse
It looks like the PC does recognize something is connected; it just doesn't know what the device is. This makes me think USB port is fine otherwise PC wouldn't recognize anything AT ALL. Does the phone still charge?
You can try the 3 methods here. I know it says for Code 28, but it will reinstall drivers for usb ports. Restart and see if phone is detected.
If it's still not detected, remove Samsung drivers, Kies, or anything related to Samsung phone. Restart and install Samsung USB drivers again. Restart again and see if phone is detected.
bro i'm afraid it did not work, perhaps replacing usb port on my device? or the whole flex?
aditional data: my nephew unplugged the usb cable by mistake while i was flashing canada stock 5.0.2 , obviously odin "failed" , but after that , windows 7 does not recognize my device anymore. i can still go into download mode.
xymic said:
It looks like the PC does recognize something is connected; it just doesn't know what the device is. This makes me think USB port is fine otherwise PC wouldn't recognize anything AT ALL. Does the phone still charge?
You can try the 3 methods . I know it says for Code 28, but it will reinstall drivers for usb ports. Restart and see if phone is detected.
If it's still not detected, remove Samsung drivers, Kies, or anything related to Samsung phone. Restart and install again. Restart again and see if phone is detected.
Click to expand...
Click to collapse
bro i'm afraid it did not work, perhaps replacing usb port on my device? or the whole flex?
aditional data: my nephew unplugged the usb cable by mistake while i was flashing canada stock 5.0.2 , obviously odin "failed" , but after that , windows 7 does not recognize my device anymore. i can still go into download mode.
maomloco said:
bro i'm afraid it did not work, perhaps replacing usb port on my device? or the whole flex?
aditional data: my nephew unplugged the usb cable by mistake while i was flashing canada stock 5.0.2 , obviously odin "failed" , but after that , windows 7 does not recognize my device anymore. i can still go into download mode.
Click to expand...
Click to collapse
Well, I'm stumped too now, man. You can try the driver thing I said on another computer. I don't know any other things you can try.
If you can charge your phone, your usb port probably works fine. The firmware got corrupted, causing this problem most likely.
solved!!
xymic said:
Well, I'm stumped too now, man. You can try the driver thing I said on another computer. I don't know any other things you can try.
If you can charge your phone, your usb port probably works fine. The firmware got corrupted, causing this problem most likely.
Click to expand...
Click to collapse
bro, my friend flexed it with medusa box for 20 dollars, my phone is fully functional now!! anyway thank u so much.
I now have another issue with my SM-N9005 hlte running Havoc OS with LolZ kernel with magisk and twrp, whenever i plug in a USB cable to my PC expecting it to show what you want to do with the PC, the phone dosent even know its in a PC and just charges, and the PC thinks NOTHING went into the usb ports and the drivers dont show anything related to my device.
Ive tried restoring the system and data & nothings changed...
I dont have more info than that atm..
Samsung USB drivers on PC ??
Best to wipe phone flash stock rom via Odin and test .
JJEgan said:
Samsung USB drivers on PC ??
Best to wipe phone flash stock rom via Odin and test .
Click to expand...
Click to collapse
I cant get the stock ROM for n9005 European hlte & the drivers are correctly installed,
The problem is that the phone dosent even know its on a PC & the PC thinks the phone is nothing
Multiple sources for stock roms .
samfirmware
samsung-updates etc .
Take it you are using the original Samsung usb cable ??
JJEgan said:
Multiple sources for stock roms .
samfirmware
samsung-updates etc .
Take it you are using the original Samsung usb cable ??
Click to expand...
Click to collapse
I still didnt find anything & well, dont really want to lol as it was working perfectly before & its not like when the system starts acting up you gotta start fresh, ive tried re installing the OS & it still dosent know the PC exists and the PC dosent know the phone exists, im gonna try as it is again & see if it somehow works
Also, i dont have the origanal samsung cable for it.
Also, i dont have the origanal samsung cable for it.
Often the problem .
JJEgan said:
Also, i dont have the origanal samsung cable for it.
Often the problem .
Click to expand...
Click to collapse
Ive never had the origanal cable tho & it worked fine before
Ive got a UNCONFIRMED fix, To clarify, its NOT the cable, its the phone itself as i was trying to say this entire time:
(If youve had this problem & nothing worked, try this but im not responsible for any bloat now on your PC & phone after this)
MTP uncorrupted somehow from a random app? Needs to be confirmed by atleast 5 people before I say this is a real fix.
So my note 3's MTP functionality was beyond oof, i decided to get spacedesk on windows & android, my note 3 was connected & it didnt recognise the PC at all & the PC had no driver detection so like full on corrupted mtp in the highest directory...
forum.xda-developers.com