Database Users

[Q] cant install android 4.4 on my defy plus

Hi,
My phone detail --
MB526, have android 4.1.2 and have rom -CM-X MIG 2.02
I have two issues :-
1. my wifi disconnects after some time and i have to disable it for long time and then enable it to work ,so any way to solve it -on my other phone
there is no issue about wifi atall.
2.I been trying to install kitkat 4.4 on my defy plus but always fails to do in recovery with message like this:--
error in /sdcard/.....zip, installation aborted"
tried both recoveries but now on touch TWRP -- any idea ?
Thanks

vaibhavm said:
Hi,
My phone detail --
MB526, have android 4.1.2 and have rom -CM-X MIG 2.02
I have two issues :-
1. my wifi disconnects after some time and i have to disable it for long time and then enable it to work ,so any way to solve it -on my other phone
there is no issue about wifi atall.
2.I been trying to install kitkat 4.4 on my defy plus but always fails to do in recovery with message like this:--
error in /sdcard/.....zip, installation aborted"
tried both recoveries but now on touch TWRP -- any idea ?
Thanks
Click to expand...
Click to collapse
I tooo faced the same problem at the beginning with cm11 (cm-11-20140117-NIGHTLY-mb526) by quarx, though I was able to install cm11(cm-11-20131229-NIGHTLY-mb526) by quarx successfully.... Im a noob to this flashing stuff still managed and understood a bit of this procedure... I believe I read this some where on this forum that if you want to install ***cm11 (cm-11-20140117-NIGHTLY-mb526)*** then you need to go back to the custom rom first then from there you can install , though I'm not 100% Sure and afraid to do any experimentation with my Defy+.... As of now Im on
"Android 4.3.1"
Kernel 2.6.32.9-Aerokernel
10.2-20131030-NIGHTLY-mb526
I am facing almost the same problems as yours "Installation failed" as if there is a problem with the zip file which I'm sure of that isnt the case :/
Please somebody help the noobs...!!!
Thank you.

imdroid87 said:
I tooo faced the same problem at the beginning with cm11 (cm-11-20140117-NIGHTLY-mb526) by quarx, though I was able to install cm11(cm-11-20131229-NIGHTLY-mb526) by quarx successfully....
Thank you.
Click to expand...
Click to collapse
Did you update recovery?
Link for that is in OP of http://forum.xda-developers.com/showthread.php?t=2515036

becer said:
Did you update recovery?
Link for that is in OP of http://forum.xda-developers.com/showthread.php?t=2515036
Click to expand...
Click to collapse
Yes I did the recovery Update and then rebooted and then tried installing cm11 (cm-11-20140117-NIGHTLY-mb526) but unfortunately it failed "Aborted"

imdroid87 said:
Yes I did the recovery Update and then rebooted and then tried installing cm11 (cm-11-20140117-NIGHTLY-mb526) but unfortunately it failed "Aborted"
Click to expand...
Click to collapse
Try maybe installing from scratch (starting with original sbf).
I reinstalled Kitkat on my Defy+ tonight - sbf, rooted sbf, 2ndInit, cm-10-20131030, recovery update and then 140120.

becer said:
Try maybe installing from scratch (starting with original sbf).
I reinstalled Kitkat on my Defy+ tonight - sbf, rooted sbf, 2ndInit, cm-10-20131030, recovery update and then 140120.
Click to expand...
Click to collapse
Buddy "becer" can u please guide me step wise to go back to the Stock Rom then 2init what ever it is I dont understand a thing
I know what stock Rom is but don't know how to degrade to the stock rom from 4.3.1 and how to install this 2init thing
would be a great help if you could guide me through the procedure step wise
Thank You.

1. root with Framaroot http://forum.xda-developers.com/showthread.php?p=37508806
2. Install 2nd init http://forum.xda-developers.com/showthread.php?p=12837303
3. Update recovery with this http://forum.xda-developers.com/showthread.php?p=48501247
4. Install CM11
Sent from my MB526 using Tapatalk

cyrusct82 said:
1. root with Framaroot http://forum.xda-developers.com/showthread.php?p=37508806
2. Install 2nd init http://forum.xda-developers.com/showthread.php?p=12837303
3. Update recovery with this http://forum.xda-developers.com/showthread.php?p=48501247
4. Install CM11
Sent from my MB526 using Tapatalk
Click to expand...
Click to collapse
Buddy Im already running cyanogenmod on my defy+ and in the second link what you gave for installing the 2ndinit Recovery it says:
DO NOT INSTALL THIS IF ARE YOU ALREADY RUNNING CYANOGENMOD. That ROM already has bootmenu pre-installed, and you'll probably end up having to flash an SBF file to recover your phone.
NOTE: You need ROOT installed on your Defy to use this application.
What should I do ???

I will try from start by using original sbf file using RSD and then CM11 and updating recovery after that Kitkat ,btw can you mention which ROM you tried because i tried these 2 earlier --> omni-4.4.2-20140117-mb526-HOMEMADE .zip and AOSPA 4.0+ PARANOIDANDROID [beta]
Kitkat 4.4.2 KOT49H android-4.4.2_r1.
Also can some1 help me with my wifi frequently disconnection problem too please .

vaibhavm said:
I will try from start by using original sbf file using RSD and then CM11 and updating recovery after that Kitkat ,btw can you mention which ROM you tried because i tried these 2 earlier --> omni-4.4.2-20140117-mb526-HOMEMADE .zip and AOSPA 4.0+ PARANOIDANDROID [beta]
Kitkat 4.4.2 KOT49H android-4.4.2_r1.
Also can some1 help me with my wifi frequently disconnection problem too please .
Click to expand...
Click to collapse
I tried this
Mokee
"MK43.1-jordanplus-201312040138-NIGHTLY"
with Gapps
gapps-jb+-20130730_defy-minimal
and
update-recovery
CM11 by Quarx
"cm-11-20131229-NIGHTLY-mb526"
with Gapps
1-16_GApps_Standard_4.4.2_signed
They both worked for me but unable to install the latest one.... I'm trying the method just mentioned by the senior member but unable to root again using framaroot as its showing me this error
"Half-Success :-/ ... system partition is read-only, use local.prop trick. Reboot your device and use adb to see if it run as root"
I don't know what to do now :silly:

imdroid87 said:
I tried this
Mokee
"MK43.1-jordanplus-201312040138-NIGHTLY"
with Gapps
gapps-jb+-20130730_defy-minimal
and
update-recovery
CM11 by Quarx
"cm-11-20131229-NIGHTLY-mb526"
with Gapps
1-16_GApps_Standard_4.4.2_signed
They both worked for me but unable to install the latest one.... I'm trying the method just mentioned by the senior member but unable to root again using framaroot as its showing me this error
"Half-Success :-/ ... system partition is read-only, use local.prop trick. Reboot your device and use adb to see if it run as root"
I don't know what to do now :silly:
Click to expand...
Click to collapse
Mine sbf is rooted alredy so maybe try it first then go to CM10 .
its DEFYPLUS_U3_4.5.1-134_DFP-231_CEE_ROOTED_No_Signed.rar
downloaded it earlier from here only.

I have tried Mokee, but direct return to Quarx compilation made big stability problems too. Solution was to flash with original rom, then rooted one, 2ndInint and Quarx cm10, then cm11.
As I had Android 2.3.6 (3.4.5.1 - 231), I used these roms - http://forum.xda-developers.com/showthread.php?t=1542956.
It is very important to wipe data and cache just after first, original flash - otherwise you will have infinite boot loop and cannot run phone.
Look at http://forum.xda-developers.com/showthread.php?t=966537 too.

becer said:
I have tried Mokee, but direct return to Quarx compilation made big stability problems too. Solution was to flash with original rom, then rooted one, 2ndInint and Quarx cm10, then cm11.
As I had Android 2.3.6 (3.4.5.1 - 231), I used these roms - http://forum.xda-developers.com/showthread.php?t=1542956.
It is very important to wipe data and cache just after first, original flash - otherwise you will have infinite boot loop and cannot run phone.
Look at http://forum.xda-developers.com/showthread.php?t=966537 too.
Click to expand...
Click to collapse
Im phone is f***** , what I did is install this framaroot and installed rootchecker..... I tried to do the rooting using "installsu" and then clicked Gilmo and it gave me this message:
“Half-Success :-/ … system partition is read-only, use local.prop trick. Reboot your device and use adb to see if it runs as root”
then I restarted my phone and check with root checker and found its saying its saying Root access successful and then I wondered which I suppose I shudnt have wondered :crying: to user framaroot and do the "unroot" and again restarted , and now after restart I tried to do the regular thing wipe cache ,Dalvik , Data and the phone is not even mounting them its sayin
E: Can't mount /cache/recovery/command etc
Im able to open the android 4.1.2 (Jb - quarx)
but not able to install a thing in my internal memory coz I messed up bad with the partition table bad:crying:
I tried to fix it through this
http://forum.xda-developers.com/showthread.php?t=1759558&highlight=status+0
but no luck :/

I been able to flash and run cm-10.2-20140120-NIGHTLY-mb526.zip thts-- android 4.3 ,so do factory reset and go here http://quarx2k.ru/roms/defy-cm10.2/ --get latest build .
my problem is only wifi disconnects frequently -seems on this working fine ,will check it for few days ,anyway 4.4 will still have bugs so better be on some lower version.

For the opening post: the first issue is a known bug in 4.4, I did not know it is wrong even in 4.1...

vaibhavm said:
I been able to flash and run cm-10.2-20140120-NIGHTLY-mb526.zip thts-- android 4.3 ,so do factory reset and go here http://quarx2k.ru/roms/defy-cm10.2/ --get latest build .
my problem is only wifi disconnects frequently -seems on this working fine ,will check it for few days ,anyway 4.4 will still have bugs so better be on some lower version.
Click to expand...
Click to collapse
Oooh in that case even if I can install the latest Cm11 by Quarx then I should not be doing it as the problem your saying about the wifi getting disconnecting frequently is not acceptable :silly:
anyways just fighting with my Defy+ as of now , Installing the Stock sbf on it as I bricked the phone
So the new Question arises what CM version is more stable or can I ask whose performance is Better in terms of speed.... As I don't mind with Features but I dont want Lags.... Previously I installed 4.2.1 I Suppose and installed the mininal gapps and was have around 240mb free of RAM...
is that good ???
Thank you for the responses buddies :fingers-crossed:

imdroid87 said:
Oooh in that case even if I can install the latest Cm11 by Quarx then I should not be doing it as the problem your saying about the wifi getting disconnecting frequently is not acceptable :silly:
anyways just fighting with my Defy+ as of now , Installing the Stock sbf on it as I bricked the phone
So the new Question arises what CM version is more stable or can I ask whose performance is Better in terms of speed.... As I don't mind with Features but I dont want Lags.... Previously I installed 4.2.1 I Suppose and installed the mininal gapps and was have around 240mb free of RAM...
is that good ???
Thank you for the responses buddies :fingers-crossed:
Click to expand...
Click to collapse
vaibhavm I have installed this 4.4.2 Android Panroid
http://forum.xda-developers.com/showthread.php?t=2576930
[AOSPA 4.4.2 KOT49H] [Beta] Defy(+) PARANOIDANDROID 4.0+ [18/01/2014]
Working awesome fast and seems stable until now and I have gone through some reviews about it on defy+ on that forum even they are giving it positive reviews..
Check it out for sure:good::fingers-crossed:

Help me,, Cannot boot in to recovery

Please help needed!!
I'm stuck here for 3 days
Ok I'm going to tell everything I did,,
My Gionee E7 is indian version.
First I rooted my phone with kingo Root.
Than I flashed CWM chinese version.
I upgraded my system to kitkat and changed the recovery to stock.
I used it for a week than some how my music player and gallery were corrupted.
I don't have any rom so I download one but it was in chinese, flashed it to my gionee. than after rooting,,
I flashed the CWM, same I flashed weeks ago
Here my problem started :crying:
The CWM is not starting. I used recoery tool to boot into recovery after boot up it shows black screen. I used every method holding Vol+ and power button but the same result.
than I tired to get back to my stock recovery but it does the same.
flashed many times both recoveries but didn't worked.
I searched a lot and find a TWRP. I flashed it and wow it worked Finally I can boot into recoery mode.
Now I find the Nandroid backup of indian version. I made it a zip and flashed it through twrp.
My phone is back to indian version but its slow, not too much but its slow; camera, gallery and other apps take some time to open. I can't make or rcv phone calls. Now what i did is download the update form System update.
Now i got kitkat rom.zip but twrp failed to install it.
Some one on the internet was saying that its the problem with my Kernel. I have the latest kernel so CWM won't work cuz it uses old kernel and display drivers.
My
android version is 4.2.2
Kernel version is 3.4.0-svn2155
I also got TWRP for lolipop,
and I patched binary_update in my kitkat rom too but TWRP can't flash it
Thats my whooooolllleeeee story. "
I got stuck with this for almost 3 days now I'm damn tired can't do it anymore plz help :crying::crying::crying:

I figured it out by myself
Ok guyz didn't get any help so I figured it out by my self.
I'm posting it here so if anyone gets stuck like me could solve his issue
I used GNQC Download tool and flashed the whole firmware of my cell including, kernel, rom, recovery, boot everything.
Now I'm back to stock indian rom (jellybean) with stock recovery and now I'm going to upgrade to kitkat
I'm new user so I can't posts links just replace the (dot) in the link,
First download stock firmware of Gionee e7 in following link, GNQC download tool and drivers also included in this zip:
www(dot)androidxda.com/download-gionee-stock-rom-models
Just unzip it and follow the instructions on this site:
www(dot)androidxda.com/gnqc-downlod-tool
I didn't slept last night bcuz of this mess now going to sleep whole day :silly:
Goodnite and bless you all :angel:

AkashX4686 said:
Ok guyz didn't get any help so I figured it out by my self.
I'm posting it here so if anyone gets stuck like me could solve his issue
I used GNQC Download tool and flashed the whole firmware of my cell including, kernel, rom, recovery, boot everything.
Now I'm back to stock indian rom (jellybean) with stock recovery and now I'm going to upgrade to kitkat
I'm new user so I can't posts links just replace the (dot) in the link,
First download stock firmware of Gionee e7 in following link, GNQC download tool and drivers also included in this zip:
www(dot)androidxda.com/download-gionee-stock-rom-models
Just unzip it and follow the instructions on this site:
www(dot)androidxda.com/gnqc-downlod-tool
I didn't slept last night bcuz of this mess now going to sleep whole day :silly:
Goodnite and bless you all :angel:
Click to expand...
Click to collapse
Hello my friend, please help me.
I am trying to flash stock inidan rom 4.2 but.. I installed all CWM for E7 found on the internet and I am getting black screen. I managed to Install TWRP but TWRP cannot flash the rom that I need to flash. I flashed a chinese 4.2 but is piece of garbage..
gngc-download-tool said that the com port is closed.
I have windows 64 is this the problem causing gngc not working?

No its not, it is working on 64bit windows very well.
In TWRP factory reset and format system and data, than install
Chinese 4.2 ROM. After that boot it and try it again.
It should work!

bllkarv said:
Hello my friend, please help me.
I am trying to flash stock inidan rom 4.2 but.. I installed all CWM for E7 found on the internet and I am getting black screen. I managed to Install TWRP but TWRP cannot flash the rom that I need to flash. I flashed a chinese 4.2 but is piece of garbage..
gngc-download-tool said that the com port is closed.
I have windows 64 is this the problem causing gngc not working?
Click to expand...
Click to collapse
For me...problem!

there´s a cwm recovery that flashes over the kernel...
i flashed it and than i was unable to go to recovery, every time i tried the phone power off
Solution: Flash the stock boot.img
Use the file according to the Android version...

Help
I just rooted my gionee elife e7. Flashed the chinese recovery which seemed to be the only one which would be compatible. But, while changing a few setting using pimp my rom, the software just stopped working. Errors keep showing up on the screen - "system.ui is not working", "android app is not working", I cannot even go the settings because "settings is not working". Third party apps still seem to work, so, whatsap and stuff continue to function. Doing a factory reset or flashing firmware again seem to be the only viable option.
But, when I try to load up the bootloader using the power and volume keys, it gets stuck on the screen showing the gionee logo and it reads 'fastboot mode' in the bottom left hand side corner. So,
a. can you offer any advice which may be useful ?
b. can you share the link from where you got a TWRP recovery which will work on the Elife ?
c. do you have any idea what exactly went wrong here ?
Any help you can provide will be appreciated because, it's my mausi's phone and I will have a very tough time explaining what really went down here.
Regards,

910F can't update from External Storage @ update from external storage is disabled

Hi Guys, I'm new here and i need help .. I'm trying to Flash a ROM ( http://forum.xda-developers.com/note-4/snapdragon-dev/twrom-nameless-rom-t3123512 )
Is not first time when i'm trying to install custom roms on android phones..
My phone is ROOTED , i have SuperSU in Menu after data reset and cache, i can Wipe Data/factory reset and Wipe Cache. But i can't Update from External Storage or Adb
Phone give me this error on Recovery menu "Update from external storage is disabled"
What should i do ?
Please help me .. I don't know very well how to solve this , please give me a detailed fix...
Edit: Now i uninstalled SuperSu and still same.. Help me please
Thanks alot guys !

sounds like you forgot to install a custom recovery.
the stock recovery has those wipe/flash options too, but flashing options don't work or are limited to officially signed update packages.

thedicemaster said:
sounds like you forgot to install a custom recovery.
the stock recovery has those wipe/flash options too, but flashing options don't work or are limited to officially signed update packages.
Click to expand...
Click to collapse
And what can i do now? please help me ...
I tried to install Official Firmware with Oddin and is not working.. "FAIL" appear on oddin ..
I unnstalled SuperSu , Unrooted .
Now my phone is not rooted ..
But still same error "update from external storage is disabled"

malefiCz said:
And what can i do now? please help me ...
I tried to install Official Firmware with Oddin and is not working.. "FAIL" appear on oddin ..
I unnstalled SuperSu , Unrooted .
Now my phone is not rooted ..
But still same error "update from external storage is disabled"
Click to expand...
Click to collapse
As the dicemaster say,instal TWRP and flash from there

i have the same problem one mine, and i can fix that... someone can explain me please...
ths all

cant root
my phone Samsung Galaxy On7 cant be rooted. any suggestion on how to root? without pc... please.... so i can use twrp to flash

Ok, and how can TWRP be installed from that point? I tried flashing it, but the same updates from external sources are disabled prevents that also. How can TWRP be installed at that point? Any help plz...

No OS Installed! Are you sure you wish to reboot?

Hello friends i was trying to root moto x style but first it got stuck in bootloader so i by mistake formatted every thing even the system etc and here i am now "No OS Installed! Are you sure you wish to reboot"
I unlocked bootloader by unlock key successfully, then flashed TWRP 2.8 and then installed SU file but as it did not worked i formatted fully including OS :crying::crying:
Now i can go to TWRP and boot loader is still unlocked so can some one please help me for from where and how i can get stock rom and flash it... i tried searching but only found Trupure rom but i am afraid to use it.
Please how can i get stock rom again and also wanted to get it root without runining everything... i am very much upset :crying: need real help now.
Note: i got it with lollipop rom then i updated via update from wifi and then i was on marshmallow.
I am Indian and using dual sim version moto x style XT1572.

http://forum.xda-developers.com/moto-x-style/development/rom-indian-marshmallow-variants-t3253684
You can use the rom from the link. Put on sdcard and flash away. The one you want is Deodexed rooted ROM: indian_mm_deodexed_rooted.zip

bw03 said:
http://forum.xda-developers.com/moto-x-style/development/rom-indian-marshmallow-variants-t3253684
You can use the rom from the link. Put on sdcard and flash away. The one you want is Deodexed rooted ROM: indian_mm_deodexed_rooted.zip
Click to expand...
Click to collapse
Hey buddy thank you so much for the reply and link. I will flash the zip from twrp and check and will reply again.
Also should i also flash Indian MM radio.zip etc??

@bw03
Buddy i flashed it with indian_mm_deodexed_rooted.zip and it worked. Also wifi was creating issue of switiching to off when trying to turn on so i flashed it with Indian MM radio.zip and it got fixed and working great.
I hope this will also benefit to other issues who are around same issues.
Thank you so much for the reply and help.

Hello i have the same problem I am stuck in twrp and i tried several rom but in every section i had error message. Are there any one could help me to open my phone?
Thanks.

Bricked A6000 Please help

hi everybody
i'm new at lenovo development thread ,and as i'am bored of laggy a6000 firmware especially after updates i decided to do root and flash custom roms so i did root successfully and installed TWRP recovery and then downloaded Carbon rom and placed it on memory and flashed "CM11 MoStock v1.48 .img"Kernel ,after flashing kernel system couldn't start and stucked on Lenovo logo and i think it's normal as the kernel not compatible with the stock rom so on TWRP i did wipe for data ,cach and dalvik cach and flashed the rom but i'm not sure if it was flashed properly or not it always says at the start of installation "not found MD5 " and after 2 minutes it say successful
after rebooting system it goes on bootloop and now i don't no what i have to do to please help me

http://forum.xda-developers.com/lenovo-a6000/help/unbrick-lenovo-a6000-plus-lenovo-a6000-t3137247

You can read my guide on how to fix nearly all software sided problems HERE.
I'd appreciate a Thanks! thrown my way!

try this tutorial
my phone lenovo a6000 once was bricked, and solved with follow those tutorial.

thnx every body i tried to flash another rom "MIUI 8" via recovery and finally it worked well

miz0ooo0 said:
thnx every body i tried to flash another rom "MIUI 8" via recovery and finally it worked well
Click to expand...
Click to collapse
Try using CM 12.1 by ED300.

if we are in any custom rom then how to flash different kernel.
if we directly flash through recovery then phone stuck on lenovo logo.