Related
This is a ported version of [ROM][KK][4.4.4]CyanAOSP KK4.4 v4.0.0 for Samsung Captivate.
All Thanks to ts1506 for his efforts!
Main Features
1. Fast, Stable and Intended for gamers
2. Built from CM11 source with O3 optimizations, heavily debloated , no 3rd party apps are installed.
4. Additional tweaks ( varied from previous version v4.0.0 )
5. For those people who love ROMs with lots of theme customizations,apps etc, this ROM is not for you.
Changelog of v4.0.0
1. CM 11 source synced as of 03/07/2014
2. Android base updated to 4.4.4 KTU48P
3. Cleaned up source, updated DocumentsUI for apk install
4. Deleted some junk
Install Procedure for best performance
NOTE : FULL WIPE RECOMMENDED
(You should take a nandroid backup if anything goes wrong)
1. Wipe data , cache , dalvik cache (required while changing layout)
2. Format system and datadata (required while changing layout)
3. Install CyanAOSP ROM. ( if error occurs for "partition layout..",dont panic, its just a warning, repeat this step, it should Flash properly)
4. Install my Gapps package (Required) , link below.
5. Set up the ROM and leave it alone for 10-15 mins.
6. Reboot again and enjoy.
Version Information
ROM OS Version: 4.4.4 KitKat
ROM Kernel: Linux 3.0.x (Semaphore 3.4.3sc)
ROM Firmware Required: Must be flashed from a recent 4.3 or 4.4 build
Based On: CyanogenMod
Status: Stable
Current Stable Version: 4.0.0
Stable Release Date: 2014-07-03
Download Link
Cyan ROM -
v4.0.0 : Download Here
v3.5.0 : Download Here
Cyan GAPPS [ Reduced Size ] - Download Here
Screenshots - Here
Contributors
ts1506, pawitp, stratosk, fishears, mnazim, SlimTeam, DerTeufel1980, kasper_h, anthonycr,
alberto96, atomixxx (for new logo), Omni ROM Team (xplodwild , Entropy512 and many more)
Another ROM!!
Gonna try it tomorrow. Thanks.
Those who haven't tested v3.5.0 yet, I ask you to wait, CyanAOSP v4.0 (Final version) is coming soon!
I just installed this.. Lot of stuff keeps crashing
eg. Dailer, messages, settings
|=>AmuzZ<=| said:
I just installed this.. Lot of stuff keeps crashing
eg. Dailer, messages, settings
Click to expand...
Click to collapse
Perform FULL wipe & Flash Gapps given in the link, dont flash other gapps. It should work fine
PlayStore fc error on v4.0. I flashed PA gapps and working fine now.
|=>AmuzZ<=| said:
I just installed this.. Lot of stuff keeps crashing
eg. Dailer, messages, settings
Click to expand...
Click to collapse
Same here.
Clean flashed 3 times. 1 time with the Gapps from the first message and 2 times with Bank's.
Also baseband version seems to be unknown even after flashing a modem.
Can't play videos with semaphore kernel, when using cm kernel then can play videos. Any help? I want to use semaphore kernel.
You can say bye bye to your stock rom because Cleankat is here, this is stock aosp based super light, fast, and 100% stable rom with many improvements like battery and ram management. Only 170mb and one of the most used rom on mt6582 chipset
!! Warning: This ROM is only for MMX A120, WIKO RAINBOW and MP RIO V2/V1, if you flash it on anything else, you will brick your device !!
INSTRUCTIONS TO FLASH CWM-
1.Download this recovery package
2.In sptools, select scatter file, then untick everything below except recovery
3.Click download button in sptools
4.Now you have sucessfully updated your recovery :fingers-crossed:
ROM FEATURES-
1.Based on latest mmx KK, so it's totally bugfree
2.Better battery life than other KK ROMs, stock kernel
3.Themed to real white complete kitkat, see screenshots
4.Added data traffic monitor in settings, you can toggle it
5.Added 13 new battery icon styles in settings, ported from carbon rom
6.Added battery icon and percentage in notification header, it's useful
7.Themed all icons to beautiful AOSP/NEXUS also removed 3G icon
8.ROM is not rooted, need to flash root zip, see attachments
9.Deodexed /app, /priv-app, /framework for faster app opening speed
10.Wonderful dolby digital sound with equalizer, see download section
11.Build.prop tweaks and init.d tweaks, working ones only
12.Android 4.4.4 easter egg and build prop, fake (4.4.2)
13.Beautiful Cleankat lockscreen, screenshot attached
14.Beautiful Cleankat bootanimation and bootlogo
15.Cleankat music player, advanced calculator and browser
16.Added notes widget for homescreen, useful for many users
17.Cyanogenmod clock widget with working weather
18.Init.d tweaks, vaccuming, loopy smoothness, zipaligned on boot
19.Launcher plus kk as default launcher app, you can install any launcher
20.Added Cleankat white themed file manager based on FO manager
21.ROM can be flashed on any base, MMX_IN_10 , WIKO BASE , STOCK JB
22.Lightest and cleanest rom ever with added all these features, 170mb only :victory:
INSTRUCTION TO FLASH ROM-
1.If you have already flashed a custom recovery then only proceed
2.Place ROM in your sdcard
3.Wipe data/factory reset
4.No need to wipe other things, script will do it
5.Install zip from sdcard and select cleankat
8.Reboot and enjoy
DOWNLOADS-
CLEANKAT V4.1 WIKO BASE
CLEANKAT V4.0 FOTA BASE
CLEANKAT V4.0 RIO BASE
DOLBY FLASHABLE ZIP
PERFECT_ROOT.ZIP
SCREENSHOTS_HD_(latest V4.0)
Here is a video review of Cleankat V4.1 by @smokerman-
https://www.youtube.com/watch?v=oyp-fMZRSsU
XDA:DevDB Information
CleanKAT ROM, ROM for the Android General
Contributors
umangleekha
Source Code: http://no source
ROM OS Version: 4.4.x KitKat
ROM Kernel: Stock Kernel
ROM Firmware Required: S5501BP_MP_MMX_IN_10 OR STOCK JELLYBEAN 4.2.2
Based On: S5501BP_MP_MMX_IN_10
Version Information
Status: Stable
Current Stable Version: V4.0
Stable Release Date: 2015-02-13
Created 2014-10-12
Last Updated 2015-02-13
Changelog-
Changelog V2.6-
1.Fixed Indian other languages font bugs, important !
2.Fixed tweaks not working in 2.5, included busybox now, impotant !
3.Now included torch app in /system
4.Merged new white bootlogo and animation
5.Fixed, improved perfomance
Changelog V2.7-
1.Finally fixed, improved battery backup
2.Completely removed mmx software update apps
3.More free ram as removed mmx sw upgrade
4.Now added OTA updater for further updates
5.Now reduced rom size to 180mb
Changelog V2.8-
1.New look, complete white kitkat
2.White dialer,framework, systemui, setupwizard
3.White settings, changed settings background to #222222
4.CleanKAT logo in about phone
5.Bigger CleanKAT text in bootanimation
6.Renamed BT to Bluetooth in settings
7.Renamed developer options to noobs keep out
8.Status bar solid color now is #222222
9.Now smaller, 178mb only
Changelog V2.9-
1.Full xposed integration now xposed works without root
2.Gravitybox is now a part of system settings
3.Now very smooth system progress bars
4.Customised about phone in settings
5.Removed software update, and added cleankat version and developer
6.Apollo uses white theme by default now
7.You must fresh install this version after wiping /data
8.Youtube app will now be adfree
9.Forced developer options "noobs keep out" in settings
10.Rom size is still 179mb
Changelog V2.9.1-
1.Xposed added in settings now, not in app drawer
2.Completed some remaining blue->white theming
3.Updated gravitybox 3.4.5-->3.4.6 now
4.Changed icon for partition app
5.Small zip, just flash and reboot over V2.9
Update zip download here
Changelog V3.0-
1.Super stable now, fixed some things
2.Fixed some visual buttons and white elements
3.New tweaks, removed useless ones
4.Better battery life than previous versions
5.New clean and beautiful icons for dialer and contacts
6.New camera and gallery, more editing options in gallery
7.Faster shutter speed and autofocus
8.Do a fresh install of this version !!
9.Super stable and light now, 170mb
Changelog V4.0-
01.Lightest kitkat rom ever, 170mb
02.Fixed live wallpaer, now no issues
03.New feature, data traffic monitor in settings
04.New feature, 13 new battery styles in settings
05.Removed xposed and gravitybox, ART runtime supported
06.Replaced all black with grey color in systemui
07.Added battery icon in statusbar header, it's useful
08.New apollo, file manager cleankat themed
09.Fixed visual artifacts for hdpi, textfields, tabs
10.Added new scripts for smoothness, zipalign
11.Added About cleankat option in settings
12.Multi dpi support, xhdpi and hdpi
13.Fixed lockring size for hdpi
Changelog V4.1-
1.Restarted work, now based completely on wiko rainbow's stock rom, better performance
2.Ported awesome clock customization from ansp rom, with working right clock alignment
3.Now fixed internal sd card not mounting on pc and in settings->storage
4.New lock screen with camera, call and unlock options, wiko's stock
5.Ported gesture controls from stock rom of wiko rainbow
6.Settings and other holo dark apps now use gradient black to grey background for better contrast
7.More neat layout of settings and more neat silent and vibrate icons in statusbar
8.Latest wiko stock boot.img, hopefully better battery backup
Note- Dolby for wiko cleankat is now different, see my dolby thread and download wiko version
Note- The clock in statusbar is off by default, go to settings->cleankat settings->clock
Changelogs
Reserved
Can we get FOTA updates in Pakistan on QMobile i9 if we install the stock MMX JB ROM?
qwerfaseeh said:
Can we get FOTA updates in Pakistan on QMobile i9 if we install the stock MMX JB ROM?
Click to expand...
Click to collapse
Maybe, try it, you can always come back to mmx kk
umangleekha said:
Maybe, try it, you can always come back to mmx kk
Click to expand...
Click to collapse
i installed jellybean mmx and i got 2 updates one was preparation file for kitkat and after restart i got new update which take a lot of time and after it is installed which is kitkat, after restart the boot logo was ok but from boot animation screen goes dim from corners and there was no display and i done this 2 times and same reult.
can you make this official FOTA update flashable for Clones like QMobile i9 etc ?
Cleankat V2.0 not working
@umangleekha
I've been following your posts since I got this device and I've also been installing all the roms that you created for this device.
That's really superb job as all of them were working:good:. But, your recent release Cleankat V2.0 is not working. It installs well and the device also boots up and shows language select option. But then I get error as "Unfortunately, setup wizard has stopped working" and device shows only battery icon on the screen(where it usually shows) and nothing else can be seen.
I've tried rebooting and cleaning everything and rebooting, but no luck.:crying:
Please check into this once.
sulemankhan18 said:
@umangleekha
I've been following your posts since I got this device and I've also been installing all the roms that you created for this device.
That's really superb job as all of them were working:good:. But, your recent release Cleankat V2.0 is not working. It installs well and the device also boots up and shows language select option. But then I get error as "Unfortunately, setup wizard has stopped working" and device shows only battery icon on the screen(where it usually shows) and nothing else can be seen.
I've tried rebooting and cleaning everything and rebooting, but no luck.:crying:
Please check into this once.
Click to expand...
Click to collapse
I know that bug, fixed now in V2.1
Trying this now...this is the new version which juat finished right?
---------- Post added at 08:28 PM ---------- Previous post was at 08:00 PM ----------
how long does this take to boot everything up?
I've been waiting for this. Will try it right away and give u feedback
---------- Post added at 01:31 AM ---------- Previous post was at 01:08 AM ----------
As of right now, everything works just amazing and loved that partition app.
Thanks
Update:
I've observed that ad free hosts are not working. Please check into that once.
Thank you so much for this ROM. So far, so good!
Please aslo make it work on clones
qwerfaseeh said:
Please aslo make it work on clones
Click to expand...
Click to collapse
Latest kernel won't work eith clones, will update ckat 1.3 with different kernel, flashable over old kk
Thanks dear if i replace the kernal in clean kat v2.1 with old one will it work ?
---------- Post added at 10:50 AM ---------- Previous post was at 10:43 AM ----------
I found explay fresh's ROM named Fresh v3 as best ROM for clones as all the Sensors are working perfect on it but the only issue i faced is it does not use memory card at all App Data, DCIM folders are all in Internal Memory, but there is an option to select internal or external storage in storage settings but if i select memory card it still uses internal, is there any patch ?
Does this v2.2 can be flashed from KK? or still have to revert to JB?
youd have to revert ko jb mate,then flash this over
Actually I thought Newer is Better and I was following this post. Now I'm on V2.1
Which one should I install, V2.2 or V2.2a on the other post?
Any updates about the bug fir Rio V1?..
Hello friends,anyone like miui 8 than I am sharing good ROM. Global miui 8 for lenovo a6000 plus lolipop and KitKat also,download file from android file host site ,select lenovo a6000 ,select developer cepoex97 and after select miui folder,this folder has many miui ROMs ,select which you like and use it.fully multi language ROM not one font in Russian,good ROM,download it,and appreciate dev sila gahara who made this ROM.
is the miui 8 8.2 rom marshmallow or is it lollipop ...and what about its performance
How is the battery life and performance on miui 8 8.2
I give other link for 8.2 and better backup is good but it is lolipop ,only second space feature is not working.otherwise good.multi language support.
plz provide te othwr link
Plz providethe oter link and also can you tell whats working and whats not ...and how is the battery backup ....
https://www.androidfilehost.com/?w=files&flid=146376
https://www.androidfilehost.com/?w=files&flid=146376
Second space feature not working but all features are working.
working great but it is not fastcharging and neither supersu is preinstalled
no root by default else working fine also getting bit of heating issues
flash supersu
For root flash SuperSU and fast charging flash Ed 300 kernal,use it.
Miui 8 multirom rom based on kitkat is good, almost bugfree, but one thing i feel it heats up watching youtube or streaming videos. Else every thing good n working wifi ,gps too. On other roms on xda i found gps issues but this rom has no such issues
anil_go said:
Miui 8 multirom rom based on kitkat is good, almost bugfree, but one thing i feel it heats up watching youtube or streaming videos. Else every thing good n working wifi ,gps too. On other roms on xda i found gps issues but this rom has no such issues
Click to expand...
Click to collapse
Yes its the best rom ever that can even blow up your hardware
Its so cool that the CPU begs you to stop usong the rom and on all other rom you found GPS issue
Can you give a logcat after turning on so that we porters and developers(who never got such a complaint) can specially contact you to have some new bugs whenever our roms feel bugfree
-_-
its lollipop
NUBIA UI 6 (not very different from ui 5 at all )
Whats NEW:
1. A much better ui experience (almost no lag while scrolling)
2. nubia's mavrick voice assistant in CHINESE ONLY
3. wallpapers from the new nubia z18
4. while using face unlock the phone wont unlock when eyes are closed.
5. stable gaming experience (50 - 60 fps on pubg mobile on HDR)
INSTRUCTIONS
1. download all the files given below
2. using a working TWRP recovery wipe data,Dalvik/ART Cache, cache, System
3. flash in the exact same order as given below
i. flash nubia v2.84.zip
ii. flash the v2.86 OTA update file
iii Flash Gapps for 6.0 PICO
iv. Flash magisk of your choice
4. Boot up and ENJOY
Downloads:
V2.86 OTA file
https://drive.google.com/open?id=1SXn-dcdP-XJglf8bQMpigqUNCYY1C0tA
v2.84 ROM file
http://ui.nubia.cn/rom/detail/29
Gapps file
https://opengapps.org
ROM REVIEW:
after using it for around 2 days the battery life is mediocre it will last you about 8hrs with around 2-3hrs of screen on time . i havent expierienced any major heating issues apart from when i was playing games like PUBG . when battery drops below 30 you will experience major fps drops while gaming. nubia's multiwindow mode is one of the best i have tried compared to oneplus,MIUI,AOSP.
Sir can you please tell me the link for 7.1.2 noughat rom that you used in youtube for fast charge proof nx531j indian version
Aroneswart said:
Sir can you please tell me the link for 7.1.2 noughat rom that you used in youtube for fast charge proof nx531j indian version
Click to expand...
Click to collapse
Mokee unofficial by tintin
https://yadi.sk/d/4ayugOpO3SSSNN
For fast charge flash QC 3.0 fix from miui 10 patches
Enable AEGIS after boot to get the amazing standby battery backup....
After install this i try again 3 time still stuck on Be yourself screen. How to fix : (
fangkampanat said:
After install this i try again 3 time still stuck on Be yourself screen. How to fix : (
Click to expand...
Click to collapse
try flashing only 2.84 from nubia downloads and see if it boots up then flash 2.86 OTA with gapps.
or
download the new 2.86 full rom from here
http://ui.nubia.cn/rom/detail/29
Miui 10 vs Nubia UI 6.0 comparison regarding battery life, signal strenth and performance please.
And anything else u might suggest/wana mention
Vi7eta said:
Miui 10 vs Nubia UI 6.0 comparison regarding battery life, signal strenth and performance please.
And anything else u might suggest/wana mention
Click to expand...
Click to collapse
For a better battery life I'd suggest you flash ui 5 en 3.05 and then clean flash miui 10..... I don't know why but I've always experienced a better battery backup after using stock en ROM about 4-5 hr sot , but this is only applicable for 7.x ROMs. Switching to 6.0 will update the modem.... Probably why we experience 2-3 hr sot.
Rover1312 said:
For a better battery life I'd suggest you flash ui 5 en 3.05 and then clean flash miui 10..... I don't know why but I've always experienced a better battery backup after using stock en ROM about 4-5 hr sot , but this is only applicable for 7.x ROMs. Switching to 6.0 will update the modem.... Probably why we experience 2-3 hr sot.
Click to expand...
Click to collapse
had the same experience with stock modem(better battery life and no heating) so made a backup of it and restored it after flashing miui 10.
another thing to mention that i have tried crdroid, lineage, resurruction remix but they all had battery drain bcuz of google play services.. so i am using miui 10 now without google services installed, performance, smoothness and battery life is way better now.
hope our dear developer @warlock9000nt gives a brief thought to miui 11/ oreo
Vi7eta said:
had the same experience with stock modem(better battery life and no heating) so made a backup of it and restored it after flashing miui 10.
another thing to mention that i have tried crdroid, lineage, resurruction remix but they all had battery drain bcuz of google play services.. so i am using miui 10 now without google services installed, performance, smoothness and battery life is way better now.
hope our dear developer @warlock9000nt gives a brief thought to miui 11/ oreo
Click to expand...
Click to collapse
I'm getting a better battery life for Oreo compared to 7.1 Roms so I have taken Oreo h2os as primary rom and oxygen is 7.1 in data slot 1 using dual boot patcher.so whenever I need to listen to music or use the camera i just reboot to 7.1 ??.
Rover1312 said:
I'm getting a better battery life for Oreo compared to 7.1 Roms so I have taken Oreo h2os as primary rom and oxygen is 7.1 in data slot 1 using dual boot patcher.so whenever I need to listen to music or use the camera i just reboot to 7.1 ??.
Click to expand...
Click to collapse
great, tried downloading the rom from 4pda but its kinda tricky
would you please share the rom here on xda or an straight link for rom download
or you could start a new thread of H2os development.. just saying :fingers-crossed:
Rover1312 said:
NUBIA UI 6 (not very different from ui 5 at all )
Whats NEW:
1. A much better ui experience (almost no lag while scrolling)
2. nubia's mavrick voice assistant in CHINESE ONLY
3. wallpapers from the new nubia z18
4. while using face unlock the phone wont unlock when eyes are closed.
5. stable gaming experience (50 - 60 fps on pubg mobile on HDR)
INSTRUCTIONS
1. download all the files given below
2. using a working TWRP recovery wipe data,Dalvik/ART Cache, cache, System
3. flash in the exact same order as given below
i. flash nubia v2.84.zip
ii. flash the v2.86 OTA update file
iii Flash Gapps for 6.0 PICO
iv. Flash magisk of your choice
4. Boot up and ENJOY
Downloads:
V2.86 OTA file
https://drive.google.com/open?id=1SXn-dcdP-XJglf8bQMpigqUNCYY1C0tA
v2.84 ROM file
http://ui.nubia.cn/rom/detail/29
Gapps file
https://opengapps.org
ROM REVIEW:
after using it for around 2 days the battery life is mediocre it will last you about 8hrs with around 2-3hrs of screen on time . i havent expierienced any major heating issues apart from when i was playing games like PUBG . when battery drops below 30 you will experience major fps drops while gaming. nubia's multiwindow mode is one of the best i have tried compared to oneplus,MIUI,AOSP.
Click to expand...
Click to collapse
Currently on CrDroid 7.1.1
Want to try chinese stock rom v2.86
Could i directly flash v2.86 or should i install v2.85 beforhand??
---------- Post added at 01:16 PM ---------- Previous post was at 01:10 PM ----------
Rover1312 said:
I'm getting a better battery life for Oreo compared to 7.1 Roms so I have taken Oreo h2os as primary rom and oxygen is 7.1 in data slot 1 using dual boot patcher.so whenever I need to listen to music or use the camera i just reboot to 7.1 .
Click to expand...
Click to collapse
Please share Exact steps and needed files for dualboot/ install multirom for Nubia Z11.
Vi7eta said:
Currently on CrDroid 7.1.1
Want to try chinese stock rom v2.86
Could i directly flash v2.86 or should i install v2.85 beforhand??
---------- Post added at 01:16 PM ---------- Previous post was at 01:10 PM ----------
Please share Exact steps and needed files for dualboot/ install multirom for Nubia Z11.
Click to expand...
Click to collapse
Due to kernel difference there are some issues with dual booting like switching between roms causes bootloop........ (I might have messed up while flashing something )
For steps on how to dual boot just follow this
https://youtu.be/FJmtMjBXWHo
Use the APK i have put on previous reply
While patching scroll to the bottom and select Z11
Edit:
The bootloop/ stuck on bootloader is due to clicking on "update ramdisk" in the dualboot app.
No network after flashing china v2.86, what is the fix if there is any?
Vi7eta said:
No network after flashing china v2.86, what is the fix if there is any?
Click to expand...
Click to collapse
I haven't faced that one before.... Try rebooting,
Or try removing and replacing the simcard.
If that doesn't work fall back to EN3.05 frimware and flash 2.86 again.
Rover1312 said:
I haven't faced that one before.... Try rebooting,
Or try removing and replacing the simcard.
If that doesn't work fall back to EN3.05 frimware and flash 2.86 again.
Click to expand...
Click to collapse
tried them all but didnt work..
Luckily i had backup of En3.05's modem
i restored the modem and efs partition from En3.05 after flashing china v2.86 and it worked.
Thanks for the reply
Worked fine for me.
Thanks very much for sharing this!
I was struggling in the last 3 weeks to install gapps and have them working...but with no succes!
freemanrw said:
Worked fine for me.
Thanks very much for sharing this!
I was struggling in the last 3 weeks to install gapps and have them working...but with no succes!
Click to expand...
Click to collapse
download gapps 6.0 pico and flash after you have booted the rom once.
if you want to flash nano gapps you will have to find a way to disable google startup service. preferably keep titanium backup open in background before rebooting to twrp.
error 7 while flashing the update?
Does Volte Jio sim works on it or not
Does Volte Jio sim works on it or not
Hi everybody,
I'm looking for a good ROM as daily use for my Z17s (NX595J), but I can't find one with all features working ... The most important one for me is fingerprint unlock. With most of GSI ROM it doesn't work. The problems that I encounter also is Pixel launcher not working with LineageOS based ROMS.
What I used so far :
Havoc-OS-v2.0-20181018-GSI-ARM64-Aonly-Gapps-Official.img.xz
Havoc-OS-v2 6-20190604-vvBuild-phhgsi arm64 a
ResurrectionRemix system-190406-arm64-aonly-vanilla-nosu.img
Can you guys post what you use (kernel, band, vendor, system img) and if you're satisfied ? Thanks !!
After trying many ROMS, kernels and ****, this is the best setup for Android 9.0 I found for my NX595J :
Recovery : TWRP 3.2.3-3 by NFound (https://forum.xda-developers.com/nubia-z17/development/twrp-t3834149)
Radio : Stock (NX595J_Z69_EN_VNG0N_V112)
Kernel : 4.4.78-perf+ (from vendor below)
Vendor : Project-Treble-NX595J-v1.5-OREO-PIE.zip (https://forum.xda-developers.com/nubia-z17/development/nx595j-t3837433)
System GSI : LineageOS 16.0-20190609 (https://forum.xda-developers.com/pr...i-lineageos-16-0-gsi-arm64-ab-how-to-t3908029)
Gapps : use Pico (open_gapps-arm64-9.0-pico-20190605.zip) because when I use stock Gapps, Pixel Launcher doesn't work (I always get the message saying the application stopped working on any LineageOs based ROM when using stock gapps... if you install Pixel Launcher after flashing Pico Gapps, it's working, don't ask me why)
Misc : Full Screen Gesture APK because you don't have any navigation bar on LineageOS 16.
link : https://play.google.com/store/apps/details?id=com.agooday.fullscreengestures&hl=en_US or : https://apkpure.com/full-screen-gestures/com.agooday.fullscreengestures
Battery life is not AMAZING but is by far the longest one I had on Android 9.0 with this phone with GSI roms : 40% left after 14 hours without charge (1h06 min of screen use, and pretty bad reception during the whole day, google location activated and no optimization made at all). Fingerprint unlock is working perfectly. Didn't try MTP.
ROMs I tried : Havoc, Lineage, Mokee 90, Liquid, Omni Pie, Resurrection Remix
what about camera?
spctoma said:
After trying many ROMS, kernels and ****, this is the best setup for Android 9.0 I found for my NX595J :
Recovery : TWRP 3.2.3-3 by NFound (https://forum.xda-developers.com/nubia-z17/development/twrp-t3834149)
Radio : Stock (NX595J_Z69_EN_VNG0N_V112)
Kernel : 4.4.78-perf+ (from vendor below)
Vendor : Project-Treble-NX595J-v1.5-OREO-PIE.zip (https://forum.xda-developers.com/nubia-z17/development/nx595j-t3837433)
System GSI : LineageOS 16.0-20190609 (https://forum.xda-developers.com/pr...i-lineageos-16-0-gsi-arm64-ab-how-to-t3908029)
Gapps : use Pico (open_gapps-arm64-9.0-pico-20190605.zip) because when I use stock Gapps, Pixel Launcher doesn't work (I always get the message saying the application stopped working on any LineageOs based ROM when using stock gapps... if you install Pixel Launcher after flashing Pico Gapps, it's working, don't ask me why)
Misc : Full Screen Gesture APK because you don't have any navigation bar on LineageOS 16.
link : https://play.google.com/store/apps/details?id=com.agooday.fullscreengestures&hl=en_US or : https://apkpure.com/full-screen-gestures/com.agooday.fullscreengestures
Battery life is not AMAZING but is by far the longest one I had on Android 9.0 with this phone with GSI roms : 40% left after 14 hours without charge (1h06 min of screen use, and pretty bad reception during the whole day, google location activated and no optimization made at all). Fingerprint unlock is working perfectly. Didn't try MTP.
ROMs I tried : Havoc, Lineage, Mokee 90, Liquid, Omni Pie, Resurrection Remix
Click to expand...
Click to collapse
does it support google cam or stock nubia camera? these are important for me.
gogar said:
does it support google cam or stock nubia camera? these are important for me.
Click to expand...
Click to collapse
I'm testing the same setup with the recent update of LOS 16 at the moment.
Which gcam Mod works here?
All I tested so far have problems with front camera(force close when taking picture).