Dead,Unbrick, Debrick LG G3 F460 S/K/L. boot security error, boot loop, dead mobiles

Dead,Unbrick, Debrick LG G3 F460 S/K/L. boot security error, boot loop, dead mobiles - G3 General

Dead, Unbrick, Debrick F460. Dead/boot security error/boot loop kitkat,lollipop version bootloaders, 9006, 9008 modes
FIRST install lg united mobile drivers, connect mobile with battery to pc, check in device manager com ports if 9006 or 9008 mode.
if you can go into custom recovery mode twrp/cwm, then it easy to fix... u need to flash zip.but your self have to make it right now of same version. here the link tutorial.. http://forum.xda-developers.com/showthread.php?t=2451696 OR try adb or terminal command or u need to make zip file. i lost that link. better try ubuntu method also.
CASE1:
if 9006 or 9008 mode, ROOTED,on lollipop/kitkat/marshmallow before phone dead but rooted, first try debrick sdcard which is simpler, then use ubuntu method. this works only if rooted before phone dead. only root access allows to rewrite files on partition here is the link http://forum.xda-developers.com/showthread.php?t=2582142
CASE2:
only 9008 mode, phone dead on lollipop/kitkat/marshmallow, not rooted, then try debrick image and Ubuntu methods. sucess rate is very low.
Guys!
the sdcard debrick may success. then these files can debrick it.
OUr devices can be fixed. After lot of research i found it. kindly go through the link given below for tutorial and do debrick. You need to try from 140 to 220. hope YOU THANK ME HERE is the Link http://m.blog.naver.com/kangmincraft/220675995736
http://m.blog.naver.com/kangmincraft/220626785379
debrick 140 https://drive.google.com/file/d/0BwKzoXanfz0jMFh1OXJ2QnROUWM/view
debrick 160 https://drive.google.com/file/d/0BwKzoXanfz0jemxYR0VNcnZULXc/view
debrick 180 https://drive.google.com/file/d/0BwKzoXanfz0jb2R4eGIzV1BHeGM/view
debrick 200 https://drive.google.com/file/d/0BwKzoXanfz0jUHBTelc4VzlQT2M/view
debrick 220 https://drive.google.com/file/d/0BwKzoXanfz0jZFBXaFRLMFJVWGc/view
try this, this is my own debrick lollipop: https://drive.google.com/file/d/0B09V79Pt4dCUSjF0ZUhNRWxiQ0k/view?usp=drive_web
Read this post who unbricked his dead mobile http://forum.xda-developers.com/showpost.php?p=66264994&postcount=14
just poweron the device after inserting the sdcard. check few times. try to go download mode.
use google translator if needed.
TIPS
sdcard miniumum 4GB, use old sdcards first. then latest memory cards, try sdcard memory higher than phone memory is advantage. try these 3 types.
debrick140 worked for most of them. try this first if you are on lollipop.
Lollipop bricked roms have higher luck.
after successful unbrick, use poweriso/ultraiso to format sdcard. i used poweriso>tools>cleanusb. then format in your pc.
ATTENTION MARSHMALLOW: IF YOU NO ROOT, NO CUSTOM TWRP, NO DOWNLOAD MODE. THEN THERE IS NO DEBRICK IMAGE YET. NOTHING WORKS. GIVE TO REPAIR RIFF,OCTOPUS BOX. THIS GUY SELLING SOUTION https: //www. facebook.com/ giaiphapandroid/. (remove spaces)IF BOUGHT, SHARE THE LINK HERE . i am not seller,i don't vouch anyone here. just helping so that you help others.
if you have friends in vietnam/korea ask them to search MM debrick and share here. if anyone have solution for MM. kindly share here.
SENIOR XDA: I REQUEST YOU TO CREATE DEBRICK FOR MARSHMALLOW.
THANK ME IF USEFUL....
Credits to Vega_Kangmin.
all copyrights to respective owners. i made simpler type. so if read all and google search, everything you can get in detail.

Reply
Hi. My name is kangmin
And you can call me 'Vega'
At first.
That debrick.img is for G3 Cat.6 (F460 S/K/L.) In korea.
So, it didn't work for international phone
(Like G3 Prime.. Maybe.. Not sure.)
And second. This debrick.img file is for kitcat,lollipop.
It didn't work for mashmellow.

Vega_Kangmin said:
Hi. My name is kangmin
And you can call me 'Vega'
At first.
That debrick.img is for G3 Cat.6 (F460 S/K/L.) In korea.
So, it didn't work for international phone
(Like G3 Prime.. Maybe.. Not sure.)
And second. This debrick.img file is for kitcat,lollipop.
It didn't work for mashmellow.
Click to expand...
Click to collapse
Hello Vega,
yes, we need this for G3 Cat.6 (F460 S/K/L.).
Thank you for your hardwork.
how are you? i have been researched all your blog today and tired translating it to english, but still i cannot understand few words. KINDLY MAKE HERE ENGLISH TUTORIAL PLEASE.
my mobile is boot security error when downgrade from marshmallow to lollipop, 5%, laf error. so i need debrick image for F460S30c_00_1223 marshmallow version. could you please make a debrick image for it?
waiting for your private message reply

Okay. I'll going to write for english
But, i don't have much times because, i have an exam
So, i'll write it as soon as possible..!

Help me Vega
Hi Kathik, I have got a problem with my LG G3 Cat.6 F460k, no download mode, no recovery, no power on, no fastboot , only qualcomm hs-usb qdloader 9008 in windows device manager, tell me, You could please tell me what program I can use to fix this problem, I don’t have the files to use in the boarddiag application, because my g3 uses the APQ8084 chipset for the 805 snapdragon processor. Please brother, help me.
Vega_Kangmin said:
Okay. I'll going to write for english
But, i don't have much times because, i have an exam
So, i'll write it as soon as possible..!
Click to expand...
Click to collapse

Thank you brother!!
Thank you Kathik, I will try this method tomorrow in my Lg G3 F460K, then I will write the results, I have many faith in this!! By the way, thank you too for guide me via whatsapp Kathik, you are a truly hero bro!!!!
:good:
manowar24 said:
Hi Vega, I have got a problem with my LG G3 Cat.6 F460k, no download mode, no recovery, no power on, no fastboot , only qualcomm hs-usb qdloader 9008 in windows device manager, tell me, You could please tell me what program I can use to fix this problem, I don’t have the files to use in the boarddiag application, because my g3 uses the APQ8084 chipset for the 805 snapdragon processor. Please brother, help me.
Click to expand...
Click to collapse

manowar24 said:
Thank you brother, I will try this method tomorrow in my Lg G3 F460K, then I will write the results, I have many faith in this!! By the way, thank you too for guide me via whatsapp, you are a truly hero bro!!!!
:good:
Click to expand...
Click to collapse
Welcome bro. hope you fix and share it here

Vega_Kangmin said:
Okay. I'll going to write for english
But, i don't have much times because, i have an exam
So, i'll write it as soon as possible..!
Click to expand...
Click to collapse
Vega. do we need to press any buttons to go into fast boot mode after mounting sdcard? kindly search Marshmallow debrick and share the link please.

manowar
manowar24 said:
Hi Kathik, I have got a problem with my LG G3 Cat.6 F460k, no download mode, no recovery, no power on, no fastboot , only qualcomm hs-usb qdloader 9008 in windows device manager, tell me, You could please tell me what program I can use to fix this problem, I don’t have the files to use in the boarddiag application, because my g3 uses the APQ8084 chipset for the 805 snapdragon processor. Please brother, help me.
Click to expand...
Click to collapse
hi manowar.
you can solve the problem with using debrick.img files.
go to the link and solve the problem!

Hello Vega and Kathik, I have not done the process yet, I will do it tonight, and then I will inform the results.
I also wanted to thank you for the hard work you are doing in publishing this tutorial and translate it into English, I know you're still working on it, but so far it is understandable and looks promising.
I have some questions to you, to clarify the process that will perform tonight, please, answer me this:
I just have a 32 GB microSD Class 10, does this serve? Or it is too large in capacity? (By the way, my Lg G3 F460K is 32GB of storage and 3GB of RAM, it has Android Lollipop 5.0.1 with HOANG LAM CAT6 1.6 ROM and it was rooted)
When I will do the format to the microSD card, before passing by the win32Disk, what format I give it? ¿FAT32 or NTFS? Or the Win32 software do it for me when it will formated the microSD?
After inserting the microSD prepared, simply press the button on/off on the phone? Or I must do any combination of on/off + vol + or any other?
It is rare to found any solution for this korean model, there are only solutions for the international models, but it seems there is nothing for the Korean model (F460L,S,K). I hope that this work will help many people in this situation and prevent all those who are paying for solving this problem.
Please brothers, answer my questions and I will do the rest. Many thanks!!!
Vega_Kangmin said:
hi manowar.
you can solve the problem with using debrick.img files.
go to the link and solve the problem!
Click to expand...
Click to collapse

I´m in the process but....
Hello brothers, good news, my phone is now in Fastboot mode, I´m working with the ADB and CMD commads, but I have several troubles, please help me in this:
I dont have de file "misc.bin", when I disarmed the original KDZ file (kitkat or lollipop) doesnt appear this file. Do you have it? Please send me or letme download it
I cant erase o create the nexts files with the commads: BackupGPT.bin neither PrimaryGPT.bin, I recibe this message when I tried: "Failed: partition table doesn´t exits"
Brothers please help me on this!! I´m very close to fix my f460 all thanks to you!!

Hello brothers Vega and Kathik, good news, thanks to you I could get my phone back, it is now 100% operational, I would not have been achieved this without your support. However, some things did not go as shown in the tutorial, so I'll detail everything I did with my F460K to help everyone with this problem. Thanks to Kathik an d Vega for the debrick files, they are the key to solve this problem.
I am very happy, now I'll help whoever needs it , as Vega and Kathik helped me!!
THANK YOU TOO TO ALL MEMBERS OF XDA, WHO HELP ME IN SOMEWAY.
:good::good::good::good:

manowar24 said:
Hello brothers Vega and Kathik, good news, thanks to you I could get my phone back, it is now 100% operational, I would not have been achieved this without your support. However, some things did not go as shown in the tutorial, so I'll detail everything I did with my F460K to help everyone with this problem. Thanks to Kathik an d Vega for the debrick files, they are the key to solve this problem.
I am very happy, now I'll help whoever needs it , as Vega and Kathik helped me!!
THANK YOU TOO TO ALL MEMBERS OF XDA, WHO HELP ME IN SOMEWAY.
:good::good::good::good:
Click to expand...
Click to collapse
Welcome! happy to hear from you. share your experience here to help others.
do you wanna upgrade to MM? just follow this link http://forum.xda-developers.com/lg-g3/general/update-downgrade-root-lg-g3-f460-s-k-l-t3353542

How I bring back my G3 F460 from Death
Hello, I'll explain you all how I recovered my LG G3 F460K from death, I must first thank @Kathik and @Vega_Kangmin for their guidance, tutorials and files, without them I would not have been able to recover my phone, the steps are basically as they are explained in Vega_Kangmin´s tutorial:
http://m.blog.naver.com/kangmincraft/220675995736
However, I found some differences that stopped me so I had to read and research in Google to make decisions and to continue with the process.
These are the steps that I follow:
1. Download all programs and files suggested in Vega_Kangmin´s tutorial.
2. I extracted the files from the original KDZ Lollipop (F460K20C_00.kdz) and put it in the folder that I call “ADB”. (My G3 had the Lam Hoang 1.6 Android 5.0.1 Rom and was rooted with debugging enabled).
3. With the Win32Disk Imager I make the first boot image to use in the phone with a microSD card, first I try with the debrick image called “debrick140.img” and the screen did nothing, unanswered. Then with the win32Disk Imager I created the image boot with 160MB and bingo!! It works!!, the screen showed the LG logo and immediately fell in Fastboot mode. Here I tell you my first warning: the only microSD card that I have was a 32GB Class 10, so I used it, then the win32Disk Imager program created in it a new partition table and reduced the 32Gb capacity only to 85MB, so after I had saved my phone, I have to save my microSD card, for that, I used Ubuntu, and one program called “Gparted” I uses it to redefine the partition table. So, beware!!!
4. I opened a CMD´s window in the folder "ADB" (shift + right click, click on "open a command window here"), plugged my phone in the PC (Windows installed the drivers of ADB interface and immediately it recognized) and I wrote my first command to verify that everything was in order:
fastboot devices
If all goes well it should show up this:
List of Devices attached
LGF460XXXXXXX device
Then I proceeded with the ADB commands, but in the tutorial I found some errors in the syntax of the commands and the order they should be done, the correct syntax is:
To remove files the syntax is ok, example: fastboot erase aboot
This is the syntax to flash new files is: fastboot flash aboot aboot.bin
(Don´t forget to change names of the extracted kdz files)
And the order for all the process in the ADB pront is this:
fastboot erase aboot
fastboot flash aboot aboot.bin
fastboot erase boot
fastboot flash boot boot.bin
fastboot erase laf
fastboot flash laf laf.bin
fastboot erase rpm
fastboot flash rpm rpm.bin
fastboot erase recovery
fastboot flash recovery recovery.bin
fastboot erase modem
fastboot flash modem modem.bin
fastboot erase SBL1
fastboot flash SBL1 sbl1.bin
fastboot erase tz
fastboot flash tz tz.bin
fastboot erase sbi
fastboot flash sbi sbi.bin
fastboot reboot
exit
Note: none of these files should be used BackupGPT.bin, PrimaryGPT.bin (if you use it the ADB will return an error saying that these tables do not exist, the file misc.bin neither will use because we do not have it and it isn´t important to revive the G3, this information I got it from here:
"YOU NEED TO EXTRACT 10 FILES FROM TOT (if you use a tot file) (aboot, boot, SBL1, dbi, laf, recovery, modem, misc, rpm, tz) and 9 FILES FROM KDZ (this is our case for the Lg G3) (misc file is not present in KDZ so dont worry it is not important) "
That out of here, please read it:
http://forum.xda-developers.com/android/general/unbrick-lg-model-download-recovery-t3060184 -----> Thanks to @hacklockx
5. After restarting the phone it show up the LG logo (this is a good news), so flash an official ROM with the LG Flash Tool as you already know and enjoy our super phone again.
By the way, in my case, after the process restart with the ADB commands, my phone start normally with all my stuff installed, I lost nothing, as if nothing had ever happened, however, I noticed slow and the camera didn´t work so I flash it with the official rom F460K20C_00.kdz and it was like new. Then I rooted it, installed the TPWR and flash again the Lam Hoang 1.6 ROM with Android 5.0.1, then installed the Xposed and that´s all!!
I hope you serve!!
Greetings from Venezuela :good::good::good:

Guys, I need help. My F460L is bootlooping but I can still access download mode. I tried flashing stock MM with LG Flash Tool but it is still bootlooping, what do I need to do?

Jinyung411 said:
Guys, I need help. My F460L is bootlooping but I can still access download mode. I tried flashing stock MM with LG Flash Tool but it is still bootlooping, what do I need to do?
Click to expand...
Click to collapse
Try these options:
1. Change your battery, try another one, in my case I have two battery, one cause endless bootloop on my G3.
2. Use the "LG Mobile Support Tool", install the program, open it, connect your G3 and see the magic happens :good:
Good luck bro

manowar24 said:
Try these options:
1. Change your battery, try another one, in my case I have two battery, one cause endless bootloop on my G3.
2. Use the "LG Mobile Support Tool", install the program, open it, connect your G3 and see the magic happens :good:
Good luck bro
Click to expand...
Click to collapse
I tried using LG Mobile Support Tool but it does not work either. I'll try the battery, thanks. Will report back.

Jinyung411 said:
I tried using LG Mobile Support Tool but it does not work either. I'll try the battery, thanks. Will report back.
Click to expand...
Click to collapse
check this link. downgrade to Lollipop. follow this link http://forum.xda-developers.com/lg-g3/general/update-downgrade-root-lg-g3-f460-s-k-l-t3353542
THANK ME IF I HELPED YOU. also MUST write feedback

Kathik said:
Dead, Unbrick, Debrick F460. Dead/boot security error/boot loop kitkat,lollipop version bootloaders, 9006, 9008 modes
FIRST install lg united mobile drivers, connect mobile with battery to pc, check in device manager com ports if 9006 or 9008 mode.
if you can go into custom recovery mode twrp/cwm, then it easy to fix... u need to flash zip.but your self have to make it right now of same version. here the link tutorial.. http://forum.xda-developers.com/showthread.php?t=2451696 OR try adb or terminal command or u need to make zip file. i lost that link. better try ubuntu method also.
CASE1:
if 9006 or 9008 mode, ROOTED,on lollipop/kitkat/marshmallow before phone dead but rooted, first try debrick sdcard which is simpler, then use ubuntu method. this works only if rooted before phone dead. only root access allows to rewrite files on partition here is the link http://forum.xda-developers.com/showthread.php?t=2582142
CASE2:
only 9008 mode, phone dead on lollipop/kitkat/marshmallow, not rooted, then try debrick image and Ubuntu methods. sucess rate is very low.
Guys!
the sdcard debrick may success. then these files can debrick it.
OUr devices can be fixed. After lot of research i found it. kindly go through the link given below for tutorial and do debrick. You need to try from 140 to 220. hope YOU THANK ME HERE is the Link http://m.blog.naver.com/kangmincraft/220675995736
http://m.blog.naver.com/kangmincraft/220626785379
debrick 140 https://drive.google.com/file/d/0BwKzoXanfz0jMFh1OXJ2QnROUWM/view
debrick 160 https://drive.google.com/file/d/0BwKzoXanfz0jemxYR0VNcnZULXc/view
debrick 180 https://drive.google.com/file/d/0BwKzoXanfz0jb2R4eGIzV1BHeGM/view
debrick 200 https://drive.google.com/file/d/0BwKzoXanfz0jUHBTelc4VzlQT2M/view
debrick 220 https://drive.google.com/file/d/0BwKzoXanfz0jZFBXaFRLMFJVWGc/view
try this, this is my own debrick lollipop: https://drive.google.com/file/d/0B09V79Pt4dCUSjF0ZUhNRWxiQ0k/view?usp=drive_web
Read this post who unbricked his dead mobile http://forum.xda-developers.com/showpost.php?p=66264994&postcount=14
just poweron the device after inserting the sdcard. check few times. try to go download mode.
use google translator if needed.
TIPS
sdcard miniumum 4GB, use old sdcards first. then latest memory cards, try sdcard memory higher than phone memory is advantage. try these 3 types.
debrick140 worked for most of them. try this first if you are on lollipop.
Lollipop bricked roms have higher luck.
after successful unbrick, use poweriso/ultraiso to format sdcard. i used poweriso>tools>cleanusb. then format in your pc.
ATTENTION MARSHMALLOW: IF YOU NO ROOT, NO CUSTOM TWRP, NO DOWNLOAD MODE. THEN THERE IS NO DEBRICK IMAGE YET. NOTHING WORKS. GIVE TO REPAIR RIFF,OCTOPUS BOX. THIS GUY SELLING SOUTION https: //www. facebook.com/ giaiphapandroid/. (remove spaces)IF BOUGHT, SHARE THE LINK HERE . i am not seller,i don't vouch anyone here. just helping so that you help others.
if you have friends in vietnam/korea ask them to search MM debrick and share here. if anyone have solution for MM. kindly share here.
SENIOR XDA: I REQUEST YOU TO CREATE DEBRICK FOR MARSHMALLOW.
THANK ME IF USEFUL....
Credits to Vega_Kangmin.
all copyrights to respective owners. i made simpler type. so if read all and google search, everything you can get in detail.
Click to expand...
Click to collapse
Hey, will this work on the D851?
If not, how do i create a debrick image for the D851?
Regards Mickey.

mickeyasamoah said:
Hey, will this work on the D851?
If not, how do i create a debrick image for the D851?
Regards Mickey.
Click to expand...
Click to collapse
only these can help you by software by money or assistance. just help. not vouch or i don;t get anything from this. your wish. remove spaces
androidbrick . com
https :// www. facebook .com/ giaiphapandroid
http :// www. vungoc -mobile. com/
if don;t wanna risk. better give to repair jtag/octoplus box which 100% fix this.

Related

Root lg k8 k350xx and k10 k430xx (MTK)

This thread is out of date since there is my new thread with an easier method: https://forum.xda-developers.com/lg-k10/how-to/friendly-root-method-lg-k8-k10-t3531223
However i keep this one for troubleshooting and deeper understanding...
This description was originally made for the k8, however it seems to work on k10 k430 devices
LG K8:
OS Android v6.0 (Marshmallow)
Chipset Mediatek MT6735
CPU Quad-core 1.3 GHz Cortex-A53
GPU Mali-T720
1.5GB of RAM
8GB ROM
LG K10 K430...:
quite similar to k8
Rooting the k8 (and the k10) is rather difficult since it's using "lz4" compression for the partition images not the usual "gzip" method.
Systemless supersu is still unable to patch lz4 boot images so we need to have a little trick. Not to mention porting a working TWRP is also a pian in the ass...
Before posting any questions/errors please read the troubleshooting guide and also read back in the thread!
Steps:
0.
Remove the back panel of the phone because you'll have to be able to reach your sd card, watch out for your battery - must not fall out!
If your TWRP supports mtp connection under "mount" you can skip this part and you don't have to put your sd card in and out - maybe you have to fix the driver in windows!
1.
Unlock your bootloader (all your data will be lost!!!) via ADB then boot up normally
http://forum.xda-developers.com/lg-k10/how-to/unlock-bootloader-lg-k10-mtk-devices-t3486302
if there is no warnning message during boot up after unlocking your bootloader read this:
http://forum.xda-developers.com/lg-k10/how-to/rid-shutting-device-corrupt-message-t3517879
2.
Boot to TWRP (you have to stay in TWRP during the whole process!!!) via ADB and fastboot
3.
Mount sd card
Backup your boot image (find boot.emmc.win in TWRP folder on your sdcard - rename it on PC to bootlz4_0.img)
or use your boot image taken from your kdz as it is written in the end of this thread:
http://forum.xda-developers.com/lg-k10/how-to/rid-shutting-device-corrupt-message-t3517879
4. Tweak bootlz4_0.img with Carliv Image Kitchen (Carliv download: http://viid.me/qe7BDp)
-Unpack it, open "boot.img-ramdisk-compress" file with a text editor (notepad++) and change the first (and only) line from "lz4" to "gz"
-Repack image - rename the repacked image to bootgz_0
5. Flash bootgz_0.img in TWRP
6. Install SuperSU (and xposed if you wish or you can istall xposed later) - do not quit TWRP from now until last step - that would brick your device
7. Backup boot image again - you need to remove sd card (unmount first) and put it in PC - it means you have to remove the usb cable from the phone and remove back panel - maybe before getting into TWRP!
- or enable mtp in TWRP and copy/paste the boot image from sd card.
8. Tweak boot image in Carliv
-Unpack it, open "boot.img-ramdisk-compress" file and change the first line from "gz" to "lz4"
-Repack image
9. Flash boot image in TWRP
10. Restart (this will take a bit longer and also expect bootloop a few times)
you can find a rather detailed description here:
http://viid.me/qe7Zoh - don't forget that you can use mtp connection instead of taking in and out the sd card if your TWRP supports it.
If you prefer using adb/fastboot commands instead removing your sdcard all the time you can use salaigeethan666's guide:
http://forum.xda-developers.com/showpost.php?p=69415205&postcount=34
but some reported problems with flashing the boot image and getting back to TWRP this way.
If you have problems booting up after installing supersu maybe you can force boot described by cpatrick3000:
http://forum.xda-developers.com/lg-k10/how-to/root-lg-k10-mtk-chipset-95-method-t3498166
or the problem might be:
http://forum.xda-developers.com/lg-k10/how-to/rid-shutting-device-corrupt-message-t3517879
If you ever lose root and try again consider Darkos333's guide: http://forum.xda-developers.com/showpost.php?p=69713043&postcount=99
or use lg up to get back to full stock:
http://forum.xda-developers.com/lg-k10/how-to/flashing-firmware-using-lg-t3517839
Unbrick guide by Berkantkz:
http://forum.xda-developers.com/lg-k10/how-to/guide-unbricking-flashing-firmware-due-t3380529
Unbrick by lg up:
http://forum.xda-developers.com/lg-k10/how-to/flashing-firmware-using-lg-t3517839
TWRPs for the different models:
TWRP of the k8:
http://forum.xda-developers.com/lg-k10/development/recovery-twrp-3-0-2-lg-k8-k350-mtk-t3517894
As for the k10 TWRP 3.0.0 you should use http://forum.xda-developers.com/lg-k10/development/teamwinrecoveryproject-3-0-0-0-lg-k10-t3404434 by berkantkz.
or TWRP 3.0.2 by Singular777: http://forum.xda-developers.com/showpost.php?p=69381986&postcount=126
In case of k10 430dsy try 123xdagsm's recovery: http://forum.xda-developers.com/showpost.php?p=69706581&postcount=154
Please, before you proceed read and practice the methods of each steps! A few hours of preparation (google + xda + tests) might save your device getting hard bricket and it's also better for you to know what you're doing! Look for fastboot commands, systemless supersu, TWRP usage, Carliv image kitchen, ... (google + xda)! You better not leave TWRP during the whole process! Keep in mind that after the supersu is installed you must be able to recompress your boot image to "lz4" otherwise you get soft bricked and you need to use lg up to refirbish...!!!
Read each steps twice and follow them stricktly!
Also keep in mind that if you want to uninstall supersu/remove root you have to reflash stock firmware with lg bridge + hard reset or lg up.
Troubleshooting
"your device is corrupt. It can't be trusted and may not work properly"
- this message is normal when you have an opened bootloader
- phone shuts down right after this message: http://forum.xda-developers.com/lg-k10/how-to/rid-shutting-device-corrupt-message-t3517879
no ADB connection (command: "adb devices" - your device is not in the output list):
- turn-on USB Debugging (settings - developer opions)
- install drivers
no fastboot connection (command: "fastboot devices" - your device is not in the output list):
- install drivers
- check device manager
- you may try to install android SDK if the connection is not working
unable to unlock bootloader (command "fastboot oem unlock"):
- allow oem unlock (settings - developer opions)
device is not booting into TWRP:
- unlock bootloader
- the TWRP is not compatible with your device (there is a list of TWRPs for different devices, if you cant find yours you can try the next guide: http://www.chinaphonearena.com/foru...752-MT6753-MT6795-MT6797-TWRP-MT67xx-tutorial)
unable to unpack boot image in carliv
- your TWRP is not compatible with your device (at least it didn't backup your boot image properly)
unable to repack boot image in carliv
- check the unpacked boot image "ramdisk" folder, if there are all the necessary files and folders, find a list attached at posts #107 and #124: (doesn't have to be the exact same since k8 and k10 migth differ - there is no "boot" folder in case of the k8 and also before installing supersu the su folders are not to be there - normally 5+ folders and 20+ files)
- see if "boot.img-ramdisk-compress" file exists
- maybe you messed up something in carliv
supersu failed to patch the ramdisk (even if it sais installed succesfully)
- you can try just unpack and repack your stock boot image install/flash it and see if it boots up - so you can be sure you are a "master" of carliv and TWRP
- your boot image is not gzip compressed - open "boot.img-ramdisk-compress" as text. It should only have one line: "gz"
supersu failed to install
- you can try just unpack and repack your stock boot image install/flash it and see if it boots up - so you can be sure you are a "master" of carliv and TWRP
- your TWRP is not compatible with your device (or you need a newer version)
device is not booting up after the final step (boot loops for more then 2 minutes)
- http://forum.xda-developers.com/lg-k10/how-to/rid-shutting-device-corrupt-message-t3517879
- use Berkantkz guide to flash back the original firmware: http://forum.xda-developers.com/lg-k10/how-to/guide-unbricking-flashing-firmware-due-t3380529
- after getting back to stock you can try just unpack and repack your stock boot image install/flash it and see if it boots up - so you can be sure you are a "master" of carliv and TWRP
- duble check your final boot image (uncompress and compare files and folders to the one attached in posts #107 and #124 - has to be reasonably/more or less the same)
- consider step 6 in Darkos333 guide: http://forum.xda-developers.com/showpost.php?p=69713043&postcount=99
- also consider cpatrick3000's force boot guide: http://forum.xda-developers.com/lg-k10/how-to/root-lg-k10-mtk-chipset-95-method-t3498166
if none of these helps make a recovery log (in TWRP under advanced menu) before final restart and post it or send it to me

This method works for the LG K10 k430Y as well. Thanks very much brah, so far I have changed a couple of thing in the build.prop like activating the multi window setting and so far it is functioning properly besides the annoying 'device is corrupt' message everything seems to be fine thanks a lot bro :good: :good:

Judroidz said:
This method works for the LG K10 k430Y as well. Thanks very much brah, so far I have changed a couple of thing in the build.prop like activating the multi window setting and so far it is functioning properly besides the annoying 'device is corrupt' message everything seems to be fine thanks a lot bro :good: :good:
Click to expand...
Click to collapse
"device corrupt" message cames rigth after unlocking the bootloader (in my case at least...) however i believe there is a way to tweak boot logo and remove the message, Ill look into it.
Anyways your welcome

Judroidz said:
This method works for the LG K10 k430Y as well. Thanks very much brah, so far I have changed a couple of thing in the build.prop like activating the multi window setting and so far it is functioning properly besides the annoying 'device is corrupt' message everything seems to be fine thanks a lot bro :good: :good:
Click to expand...
Click to collapse
Can i ask whitch TWRP you used? Did you maybe tried it with the one i ported for the k8 or is this the one by berkantkz?

I used the twrp made by berkantkz, do you think it would be safe if I flashed it on my k10.

Judroidz said:
I used the twrp made by berkantkz, do you think it would be safe if I flashed it on my k10.
Click to expand...
Click to collapse
Actually the recovery partitions size is approx. 16Mb. Berkantkz's TWRP is almost 17Mb so there is little chance you can flash it. There is no problem if you try it would give you an error message if the size is too big and nothing's gonna change. I recompressed berkantkz's TWRP to gzip (https://drive.google.com/open?id=0BwyMOazoSp8TdnhBbWpobEk0V0E) so it is smaller, you can try to flash that but you have to try it before. I mean just boot into it (fastboot boot ...) don't flash it first.
Keep me updated please!
About the multiwindow, did you use "ro.build.type" -> userdebug or "persist.splitwindow.support_all" -> true ?

I flashed back to stock with lg bridge and also did factory format with hard buttons. There is no way to root again and boot up succesfully. Somehow lg bridge and also factory format leaves some partions untouched that still have something from supersu. So i erased all partitions in fastboot...
I shouldn't have cause now my phone can't connect at all. Not even in download mode.
I suggest if anyone tried any method to root unsuccesfully that should not try this method. It will not boot up...:S
Thats all for now. I'll try to exchange my phone and then start again...
I can't make lg up to work with the k8. There is no lgup...dll.msi to install. Any ideas?
Maybe the boot image is not turned back to stock not by factory format nor by lg bridge... this migth cause the mess with Supersu install after turnig back to stock... With lg up we could reflash the full stock system and try rooting again...
If anyone plans to root save your stock boot image first, might come handy later...

hilp for root lgk10 439dsy

ha118814kh said:
hilp for root lgk10 439dsy
Click to expand...
Click to collapse
439? Are you sure? I guess it must be 430... however i belive the only method is the above described one. If you ever attempted rooting the device i suggest not to do that unless you can flash it back to fully stock.

Theese might help for unsuccesful root attempts... i wish i found this before erasing all my partitions...:S
http://forum.xda-developers.com/showpost.php?p=63816659&postcount=2769
and
http://forum.xda-developers.com/apps/supersu/unroot-systemless-root-t3249542

Are there any easier ways to root it? It seems a bit of difficult to me(k430)

xdarootxda said:
Are there any easier ways to root it? It seems a bit of difficult to me(k430)
Click to expand...
Click to collapse
I'm afraid until SuperSU is not "lz4" compatible there is no easier method. I't not so difficult anyways as long as you can make a fastboot connection. There is always download mode and lg bridge if anything goes wrong...
PS. if you ever attempted to root this device before then most likely it's not gonna work... unless you can make LgUP see your k430 and reflash the whole firmware.

gottlasz said:
I'm afraid until SuperSU is not "lz4" compatible there is no easier method. I't not so difficult anyways as long as you can make a fastboot connection. There is always download mode and lg bridge if anything goes wrong...
PS. if you ever attempted to root this device before then most likely it's not gonna work... unless you can make LgUP see your k430 and reflash the whole firmware.
Click to expand...
Click to collapse
Thanks for the information, but i'm new to bootloader and recovery, so are there any video guides about this process?

xdarootxda said:
Thanks for the information, but i'm new to bootloader and recovery, so are there any video guides about this process?
Click to expand...
Click to collapse
There are many video guides on youtube but not for this particular case. I guess you can search each step separately and put the whole picture together.

gottlasz said:
There are many video guides on youtube but not for this particular case. I guess you can search each step separately and put the whole picture together.
Click to expand...
Click to collapse
Thanks, I'll have a look.

I'm so glad to see people working on this phone. Has anyone gotten this method to work?
Sent from my VS500 using XDA Free mobile app

chopperchez said:
I'm so glad to see people working on this phone. Has anyone gotten this method to work?
Sent from my VS500 using XDA Free mobile app
Click to expand...
Click to collapse
Guys,root is successfully received!
see details on the Russian forum
4pda in the subject LG K10 LTE.
Sent from my LG-K430 using xda premium

lg_l7_p700 said:
Guys,root is successfully received!
see details on the Russian forum
4pda in the subject LG K10 LTE.
Sent from my LG-K430 using xda premium
Click to expand...
Click to collapse
Unfortunately i speak no russain.. Is it somewhat similar to the method described in the OP?
It also uses carliv so i guess its basically the same, isn't it?

lg_l7_p700 said:
Guys,root is successfully received!
see details on the Russian forum
4pda in the subject LG K10 LTE.
Sent from my LG-K430 using xda premium
Click to expand...
Click to collapse
The principle of obtaining root.
Install SuperSU via TWPR.
We have the boot ramdisk
compression in lz4,it is not
supported so first comes the
installation boot with
compression gz,then install SuperSU,
and boot back lz4
Sorry for my bad English.
Sent from my LG-K430 using xda premium

I would love to try this.. but I tried flashing the supersu package previously and it didn't work.. my phone boots up properly.. but my usb isn't working anymore. I can't get into fastboot anymore cos there is no hardware shortcut to enter into that and Without ADB i can't go into fastboot. is there any way to fix this? pls help

LG G2 bricked D802 ... no download mode fastboot commands not working

Hello everyone i am new here so i am sorry if i posted my thread in wrong place #admin i am sorry for that. i need your help
- i just bricked my LG G2 D802 after trying to install lolipop firmware ....
-my phone stuck on lg logo
-no download mode when i hold the up volume and put the usb cable i get:
fast boot mode started
reset
portchange
fastboot; processing command
the computer recognize the phone as "Android bootloader interface"
basically my issue is that no command works in fastboot mode ex: if I type command :"fastboot erase recovery " it not work no action performed.
-------------------------------
so brothers and frnds plz help me to resolve my this problem i shall be very thankful to you.Please guide me step by step i will do it
SOrry for my bad english

Trying help
Hello my friend.
I dont know if you already solve the problem, but i found this at another forum and i think this may can help you or another person with similar problem with yours.
"You don't have to replace the board, you short a specific set of capacitors as shown here:
http://forum.xda-developers.com/lg-g2/general/lg-g2-unbrickable-fix-real-hard-brick-t2904404
That allows you to obtain bulk mode (qhsusb_bulk 9006). You can then fix it using linux as shown here:
http://forum.xda-developers.com/showthread.php?t=2582142
(If instead of getting bulk 9006 mode, you get qdloader 9008 when shorting the mobo, then let me know and I can provide alternative instructions.)
Or you can try the windows solution here:
http://forum.xda-developers.com/lg-g2/development/tools-srk-tool-useful-toos-lg-root-twrp-t3079076
I would recommend once you have bulk mode to flash aboot, boot, dbi, laf, rpm, sbl1, and tz regardless of what the above guides might say. This will restore download mode at which point you can flash a kdz or tot to completely restore the phone to working condition. Here are the partitions you'll need for the g2:
http://downloads.codefi.re/autoprime/LG/LG_G2/
Good luck."
Credits for: iowabowtech

Help with hard-bricked Qualcomm Moto E4 (xt1768)

I've got a Moto e4 Qualcomm xt1768 (non-Amazon ads version) which I had previously successfully unlocked the bootloader on and rooted. Was messing around recently and managed to (I think) ruin the partition table. It no longer gives any indication of powering on, but if I plug it into a computer right after popping the battery out and in again it's showing up in HS-USB mode as a Qualcomm HS-USB QDLoader 9008. From my research it seems like, with the correct files, I could recover by either flashing something via QFIL (some kind of firehose image?) or possibly getting into fastboot by dd writing a full emmc backup of a working device to an SD card. Unfortunately I don't have either of those things for this device.
If anyone has either of those things already, or might be willing to do a dd dump of their xt1768 for me to try the SD card method, or has other information for me that would help me recover the device, I would be forever grateful.

You need a stock firmware to revive your phone and nothing else. As far as it is detected by computer.

I tried the sdcard dump method and it did not work. Without a new leaked image the new e4 cannot be restored from the qualcomm bootloader.

Heres the loader.img i made before my phone was bricked. If you find a way to use this or a blankflash file that works with our phone please let me know
https ://mega.nz
/#!GTBXnIRR!2SA6PaaEvfqpJ4sG4a3yD-CFlrTrloR9j40CVpcw26c

@rudism Someone found a blankflash for xt1767, which works on the xt1768.
Follow the xt1767 instructions here
https://forum.kingfirmware.com/thread-Moto-E4-XT1766-XT1767-Dead-Boot-Repair
You can use the driver.cab from
https://forum.xda-developers.com/moto-z/how-to/guide-how-to-unbrick-moto-z-hardbricked-t3590133
then download
https://androidfilehost.com/?fid=1322778262904008165
and flash the individual paritions via fastboot

Awesome! Can confirm that this worked and brought my bricked xt1768 back to life. Thank you!

Sorry to bump, but I also wanted to confirm that this worked for me as well. Did a successful restore but didnt realize that the firmware version I downloaded had an older bootloader so it bricked my phone. Finally found this post and all is well again!
xeropressence said:
@rudism Someone found a blankflash for xt1767, which works on the xt1768.
Follow the xt1767 instructions here
https://forum.kingfirmware.com/thread-Moto-E4-XT1766-XT1767-Dead-Boot-Repair
You can use the driver.cab from
https://forum.xda-developers.com/moto-z/how-to/guide-how-to-unbrick-moto-z-hardbricked-t3590133
then download
https://androidfilehost.com/?fid=1322778262904008165
and flash the individual paritions via fastboot
Click to expand...
Click to collapse

Help me My friend
I need the Blankflash file for the xt1767 / xt1768 I have my phone in hard brick, I need to start it in fastboot mode. help me with the file as I can't find it.

Does anyone has any instruction for XT1762 ?
What I did I have installed Lineage 14 on it and it worked well, then I found a 16 version and wanted to install it. After that it would not boot into anything. Didn't help to reinstall 14 or wipe or anything. Then I downloaded a factory image, but it might have been the wrong one and I flashed all the files preloader, boot, oem, system, etc. After that it would not do anything. Now if I plug it in the computer I only see the white LED on, and if I press long the power button then in "lsusb" it shows up for 2 seconds as MediaTek Inc. MT65xx Preloader.
Is it still possible to recover it? I would greatly appreciate any help.

My moto g5 plus is bricked and is stuck at fastboot mode

I have Moto g5 plus xt 1686 Indian variant.I hadn't unlocked my bootloader. The device was working but suddenly one day it got bricked dont know why but it boots only in fastboot mode that to with no information.The only error i am able to verify is "failed to validate boot image"
After trying for around 1 week i have tried these things
1. Used rsd lite earlier it wasnot able to identify my device in windows 10 machine but in windows 7 machine its able to do that but unable to flash the device
2. tried to flash using adb commands but they are also not working
Since i tried to unlock the bootloader through the guide of motorola website then also i am not able to do that and get this error "'fastboot' is not recognized as an internal or external command,
operable program or batch file."
Please help ....

Anubhav074 said:
I have Moto g5 plus xt 1686 Indian variant.I hadn't unlocked my bootloader. The device was working but suddenly one day it got bricked dont know why but it boots only in fastboot mode that to with no information.The only error i am able to verify is "failed to validate boot image"
After trying for around 1 week i have tried these things
1. Used rsd lite earlier it wasnot able to identify my device in windows 10 machine but in windows 7 machine its able to do that but unable to flash the device
2. tried to flash using adb commands but they are also not working
Since i tried to unlock the bootloader through the guide of motorola website then also i am not able to do that and get this error "'fastboot' is not recognized as an internal or external command,
operable program or batch file."
Please help ....
Click to expand...
Click to collapse
You need to install fastboot in pc and then flash the device to make it work.
You can prefer this thread
https://forum.xda-developers.com/g5...-flash-stock-romfactory-t3691396/post74221633

Anubhav074 said:
I have Moto g5 plus xt 1686 Indian variant.I hadn't unlocked my bootloader. The device was working but suddenly one day it got bricked dont know why but it boots only in fastboot mode that to with no information.The only error i am able to verify is "failed to validate boot image"
After trying for around 1 week i have tried these things
1. Used rsd lite earlier it wasnot able to identify my device in windows 10 machine but in windows 7 machine its able to do that but unable to flash the device
2. tried to flash using adb commands but they are also not working
Since i tried to unlock the bootloader through the guide of motorola website then also i am not able to do that and get this error "'fastboot' is not recognized as an internal or external command,
operable program or batch file."
Please help ....
Click to expand...
Click to collapse
You cannot unlock bootloader anymore. So try flashing normally. If your hardware is not damaged then you might me able to make it work.

debdeep98 said:
You cannot unlock bootloader anymore. So try flashing normally. If your hardware is not damaged then you might me able to make it work.
Click to expand...
Click to collapse
Since it is booting into fastboot mode i dont think its damaged.But the problem is its my first time for flashing so i dont know very much about it.
What i know is that , i installed adb in my system ,and then through command prompt i tried to detect my device But its not getting detected.So if you can please provide me a brief guide for flashing phone.

Anubhav074 said:
Since it is booting into fastboot mode i dont think its damaged.But the problem is its my first time for flashing so i dont know very much about it.
What i know is that , i installed adb in my system ,and then through command prompt i tried to detect my device But its not getting detected.So if you can please provide me a brief guide for flashing phone.
Click to expand...
Click to collapse
K.. install adb(https://www.androidfilehost.com/?fid=745425885120698566 ). If you had installed moto assistant then you'll have the drivers. If not then google motorola drivers and install them(http://www.motorola.com/getmdmwin ).
Once it's done. Open the folder where adb is installed.
Hold shift and right click>open command promt here.
At this point boot into the bootloader on your phone (fastboot mode).
On cmd type fastboot devices.
If your device is detected then it will show on screen.
If you get to this part.
Start flashing thru fastboot.
Get the files from google( or https://mirrors.lolinet.com/firmware/moto/potter/official/RETAIL)
Instructions to flash are in xda.
If you get failed to flash: security version downgrade then you're probably flashing an older firmware. Download the latest.
If you get failed to flash: preflash validation failed then there's not much you can do. Or atleast i don't know a solution to that.

its not detecting my device
Actually the problem is that it is not detecting my device when i give this command, although i have installed device drivers and adb also....This is is the problem

Anubhav074 said:
Actually the problem is that it is not detecting my device when i give this command, although i have installed device drivers and adb also....This is is the problem
Click to expand...
Click to collapse
Did you lenovo moto smart assistant to flash the device, you can try that as it will flash the device for you.

riyan65 said:
Did you lenovo moto smart assistant to flash the device, you can try that as it will flash the device for you.
Click to expand...
Click to collapse
yeah i tried that but when it is not verifying my phone when i select id (which is xt 1686) it says that phone can not be verified try again.i have tried every given id but it is refusing to accept my device.

Anubhav074 said:
Since it is booting into fastboot mode i dont think its damaged.But the problem is its my first time for flashing so i dont know very much about it.
What i know is that , i installed adb in my system ,and then through command prompt i tried to detect my device But its not getting detected.So if you can please provide me a brief guide for flashing phone.
Click to expand...
Click to collapse
Here's a guide to flash stock firmware.
Try the linked Mini ADB & Fastboot, if your device isn't recognised try to connect it to another usb port or use another usb cable.
Are you sure that you're in fastboot mode when you type the commands?
Read the guide carefully.
You need:
Latest signed stock firmware:
Europe (RETEU):
https://drive.google.com/file/d/13WuhoogtAdoincAyTwCLvRj0d-Z9kL0P/view?usp=sharing
India (RETIN):
https://mirrors.lolinet.com/firmwar...ubsidy-DEFAULT_regulatory-DEFAULT_CFC.xml.zip
US (RETUS):
https://mirrors.lolinet.com/firmwar...ubsidy-DEFAULT_regulatory-DEFAULT_CFC.xml.zip
flashallO.bat:
https://www.dropbox.com/s/zfh67uzfle9hsco/flashallO.bat?dl=0
Motorola drivers:
https://drive.google.com/file/d/0B0WGdtNWubBJYnlDcWRBZXltanc/view?usp=sharing
Mini ADB & Fastboot
https://drive.google.com/file/d/1lLYfimKN1U5CJ9cfpTCkhtMiuG8EfXBZ/view?usp=sharing
1) Download the 8.1.0_OPS28.85-17-6-2 Indian firmware (it's the last one for the Moto G5+ (potter).
2) Install Mini ADB & Fastboot (best place is the root directory of C:/ or how the partition/hard drive is named where your OS resists), not in program files or another folder.
3) Extract the firmware to that ADB & Fastboot folder.
4) Download my "flashallO.bat" and move it to that folder too.It removes the need for you to manually flash all partitions, just double-click it and it'll run all the commands for you.
5) Download and install Motorola device drivers.The program is called "Motorola Device Manager".
6) Reboot your phone to the bootloader. To do this, turn it off, then hold down the power and volume down buttons until you see a bugdroid undergoing open-heart surgery.
7) Connect the phone to your PC with your USB cable. Type
Code:
fastboot devices
to check if your device is connected. A serial number should be shown.
8) Run the flashallO.bat script. (Caution: This will wipe your device completely!) It will take some time to flash, just be patient and don't worry.
NOTE: If the command window appears for a brief moment then disappears, device drivers may not be installed. Ask again then.
9) Once the command window closes, it should have completed the flashing process and you are safe to press the power key on the phone to start Android. Just make sure that the text near the buttons reads "START".
Sent from my Moto G5 Plus using XDA Labs

Followed your guide this time my device is getting detected and when typed command adb devices its giving some number also but the image you provided is not flashing it.Dont know why please help

Anubhav074 said:
Followed your guide this time my device is getting detected and when typed command adb devices its giving some number also but the image you provided is not flashing it.Dont know why please help
Click to expand...
Click to collapse
You're always talking about ADB commands, it's Fastboot that you have to use, it's described above how you get there.
What image do you mean when you say it's not flashing?
The guide is complete, read it carefully.
You have to download a zip file, in your case the Indian (RETIN) variant:
XT1686_POTTER_RETIN_8.1.0_OPS28.85-17-6-2_cid50_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml.zip
Unpack it to fastboot folder, use the flashallO.bat to flash the firmware.
Please clarify what image you're talking about and if you do the fastboot flash like described above please provide the recovery.log , you can do that in TWRP->advanced->copy log, if TWRP is installed.
Try to flash the firmware and immediately after that grab a log and attach it here.
Sent from my Moto G5 Plus using XDA Labs

Wolfcity said:
You're always talking about ADB commands, it's Fastboot that you have to use, it's described above how you get there.
What image do you mean when you say it's not flashing?
The guide is complete, read it carefully.
You have to download a zip file, in your case the Indian (RETIN) variant:
XT1686_POTTER_RETIN_8.1.0_OPS28.85-17-6-2_cid50_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml.zip
Unpack it to fastboot folder, use the flashallO.bat to flash the firmware.
Please clarify what image you're talking about and if you do the fastboot flash like described above please provide the recovery.log, you can do that in TWRP->advanced->copy log, it will be stored in your internal storage.
Try to flash the firmware and immediately after that grab the log (with TWRP file manager) and attach it here.
Sent from my Moto G5 Plus using XDA Labs
Click to expand...
Click to collapse
Sry it's fastboot not adb .But the image i am trying to use is indian(retin) as you provided.And i followed all steps as they were given.
But i dont know how to get log files.
Also i would like to mention that this is my first time trying flashing a phone and as per my knowledge we have to install twrp recovery which i haven't done.its a normal phone with locked oem.
So please guide me how to get log files.

Anubhav074 said:
Sry it's fastboot not adb .But the image i am trying to use is indian(retin) as you provided.And i followed all steps as they were given.
But i dont know how to get log files.
Also i would like to mention that this is my first time trying flashing a phone and as per my knowledge we have to install twrp recovery which i haven't done.its a normal phone with locked oem.
So please guide me how to get log files.
Click to expand...
Click to collapse
You don't need logs. Your phone is locked so you cannot flash twrp. Only thing you can do is flash using fastboot commands. Just download the firmware.. extract. Put all of those files in the adb folder and run the flashall.bat or individual commands like fastboot flash recovery recovery.img which ever you feel is easier for you.

Anubhav074 said:
Sry it's fastboot not adb .But the image i am trying to use is indian(retin) as you provided.And i followed all steps as they were given.
But i dont know how to get log files.
Also i would like to mention that this is my first time trying flashing a phone and as per my knowledge we have to install twrp recovery which i haven't done.its a normal phone with locked oem.
So please guide me how to get log files.
Click to expand...
Click to collapse
debdeep98 said:
You don't need logs. Your phone is locked so you cannot flash twrp. Only thing you can do is flash using fastboot commands. Just download the firmware.. extract. Put all of those files in the adb folder and run the flashall.bat or individual commands like fastboot flash recovery recovery.img which ever you feel is easier for you.
Click to expand...
Click to collapse
That´s what I´ve said. If you would have TWRP you would be able to send a recovery.log but all you want to do is to flash a signed fastboot firmware. That´s possible without TWRP or unlocked bootloader, just by fastboot. Unzip the indian firmware
https://mirrors.lolinet.com/firmwar...ubsidy-DEFAULT_regulatory-DEFAULT_CFC.xml.zip
into your Mini ADB & Fastboot folder, place the flashallO.bat there too and double-click it, everything in fastboot mode as described before.
What happens when you do that? Are the commands executed in the command window of your Windows PC?
Can you make a screenshot of it? The guide I posted has everything you need in it, you have to tell me what happens when you try to flash the unzipped firmware.
Just to be clear, the firmware and everything has to be on your PC, not your moble device!

i tried to take screen shot of it but was unable to do it but was successful in copying the complete commands log in text file so here it is
View attachment batch.txt

Anubhav074 said:
i tried to take screen shot of it but was unable to do it but was successful in copying the complete commands log in text file so here it is
Click to expand...
Click to collapse
Ok, that doesn't look to good.
The whole process is failing right at the start when the device is trying to build the partition table.
Have you tried different USB cables and ports?
Imo there are only two possible solutions:
Your device isn't working with fastboot correctly or its a hardware failure, the eMMC (the internal SD) may be corrupted. As your device is locked and hasn't been modded in any way this is the most plausible scenario also because it crashed out of the blue.
The only thing you can try yet is to use a different ADB and Fastboot tool, this one for example:
Minimal ADB & Fastboot:
https://drive.google.com/file/d/10NEzpxKpYWfq-HdK42ctwoEnCg-BfsRQ/view?usp=drivesdk
If all that changing of ports, cables and tools doesn't help you have to bring your device to a service center, they will most probably change the motherboard which isn't a cheap repair so if your device isn't under guarantee anymore you have to consider it it's worth the money.
Good luck!
Sent from my Moto G5 Plus using XDA Labs

So i tried with different fastboot software which you provided but i get the same errors .On phone when these commands run i get these messages failed to validate bootloader image and some thing called piv is also not able to be validated.
So i think its the end of my testing journey. Now can you please tell me how much chances are there for software issue. And is there any thing else i could.Any way i got to learn so many things through this but if is there anything left. Or should i go to service center

Anubhav074 said:
So i tried with different fastboot software which you provided but i get the same errors .On phone when these commands run i get these messages failed to validate bootloader image and some thing called piv is also not able to be validated.
So i think its the end of my testing journey. Now can you please tell me how much chances are there for software issue. And is there any thing else i could.Any way i got to learn so many things through this but if is there anything left. Or should i go to service center
Click to expand...
Click to collapse
I think you've done everything that's possible.
The device wasn't rooted,modded,unlocked or something.
It showed the failure out of the blue.
You tried different fastboot tools, cables, ports and the correct firmware.
I asked someone with more knowledge about your log and the whole case and he is thinking the same as I do.
So the chance for a software problem is really small. I told you everything I know, maybe a service center has more options for software checks but as far as I know they use the good old Lenovo Motorola Software Assistant.
So I would recommend to go there and ask (before they do anything) what you have to pay if your eMMC is broken. Here in Germany they always change the whole motherboard, the costs are about the half of the price you paid for the device here.
If your still under guarantee it's a different story.
I'm sorry, I told you everything I know and I flashed my Moto G5+ several times.
My opinion is that the device has a hardware failure and visiting the service center is the only thing you could do now.
I really would like to give you better news.
Sent from my Moto G5 Plus using XDA Labs

Hi, please help.
I have factory unlocked Moto G5 plus. I never did anyrhing to. All factory.
Recently its stuck in bootloop.
I really want to save all my pictures and texts.
Please help
Thanks

phone crazy said:
Hi, please help.
I have factory unlocked Moto G5 plus. I never did anyrhing to. All factory.
Recently its stuck in bootloop.
I really want to save all my pictures and texts.
Please help
Thanks
Click to expand...
Click to collapse
Read this thread. You can flash signed Motorola firmware like discribed. If you don't want to lose your data you can try to omit the "erase user data" command. Just delete it out of the flashallO.bat.
https://forum.xda-developers.com/g5...ked-stuck-fastboot-mode-t3996599/post80792213
Sent from my Moto G5 Plus using XDA Labs

Bricked my zenfone 3 (ZE520KL)

hi, i have flash this firmware
ZE520KL_V13_13_1_36_M2_6_7_P7_Factory_raw
fastboot modded but now i can t do anything and my notebook not see my phone can anyone help me? thx

Putting the phone into EDL and using QFIL to load the stock rom is probably your best bet

what is EDL and i never used QFIL there is a guide for this? thx

sgjk86 said:
what is EDL and i never used QFIL there is a guide for this? thx
Click to expand...
Click to collapse
EDL is basically a state built in to Qualcomm chips that allows it to load firmware to unbrick when it can't load Android. QFIL can be found at https://qfiltool.com/qfil-tool-v2-0-3-5 and a stock rom can be found here https://firmwarefile.com/asus-zenfone-3-z017d-ze520kl. The QFIL tool link has its own instructions link by the download button but in short you'll want to install Qualcomm's QFIL USB drivers, open QFIL's .exe, select the .mbn from the stock rom, and hit download. It'll start flashing.

need deep flash cable for enter in EDL mode?

sgjk86 said:
need deep flash cable for enter in EDL mode?
Click to expand...
Click to collapse
No, you can use the standard microUSB cable you were using. All you need are the USB drivers (link is in QFIL's tutorial), QFIL itself, and the stock rom for the .mbn file to flash.

EDL mode will automatically be handled by QFIL itself as long as the device is on as shown in the tutorial.

i have install driver but NOTEBOOK not see smartphone in fastboot mode... ( must try the cable? ) and where i find .mbn file for firmware?

The driver from the QFIL tutorial doesn't allow platform tools to see it, it allows QFIL to see it. You need to download QFIL and follow its tutorial. The .mbn file is with the firmware download I also linked.

n00bl3x said:
The driver from the QFIL tutorial doesn't allow platform tools to see it, it allows QFIL to see it. You need to download QFIL and follow its tutorial. The .mbn file is with the firmware download I also linked.
Click to expand...
Click to collapse
That firmware only supports fastboot commands with a .bat file.

sgjk86 said:
i have install driver but NOTEBOOK not see smartphone in fastboot mode... ( must try the cable? ) and where i find .mbn file for firmware?
Click to expand...
Click to collapse
Try this guide here.This should explain everything to get it working again.Best of luck!
Unbrick a Bricked ZenFone 3 (ZE520KL/ZE552KL) (Full Guide) - Techtrickz
In this guide, we show you how to unbrick a bricked ZenFone 3 ZE520KL and ZE552KL by restoring bootloader and latest version of stock firmware. Installing custom recovery like TWRP, custom ROM, custom kernel and getting root are fine, but sometimes these will brick your device leaving it a...
techtrickz.com

Surgemanxx said:
That firmware only supports fastboot commands with a .bat file.
Click to expand...
Click to collapse
Ah, downloaded it and I see what you mean. Thanks!

n00bl3x said:
Ah, downloaded it and I see what you mean. Thanks!
Click to expand...
Click to collapse
No problem!That guide should get it back factory for them at least!

Surgemanxx said:
Try this guide here.This should explain everything to get it working again.Best of luck!
Unbrick a Bricked ZenFone 3 (ZE520KL/ZE552KL) (Full Guide) - Techtrickz
In this guide, we show you how to unbrick a bricked ZenFone 3 ZE520KL and ZE552KL by restoring bootloader and latest version of stock firmware. Installing custom recovery like TWRP, custom ROM, custom kernel and getting root are fine, but sometimes these will brick your device leaving it a...
techtrickz.com
Click to expand...
Click to collapse
so, i put original last firmware in a micro sd and run it from recovery and i replace all?

sgjk86 said:
so, i put original last firmware in a micro sd and run it from recovery and i replace all?
Click to expand...
Click to collapse
You can do it both ways from what that guide says.Personally,I would try to restore via fastboot

Surgemanxx said:
You can do it both ways from what that guide says.Personally,I would try to restore via fastboot
Click to expand...
Click to collapse
i can t run on fastboot the phone stay on screen at first post and notebook not see nothing so i think my last hope is to put firmware in micro sd and try to install from original recovery the firmware i have now.is.the same of this topic
UNLOCK/LOCK Bootloader For ZenFone 3 ZE520KL/ZE552KL
Mod info: Method doesn't work anymore and will result in a hard brick. Make sure you’ve backed up all of your IMPORTANT DATA before unlocking/relocking bootloader I am not responsible for bricked devices and dead SD cards. YOU are choosing to...
forum.xda-developers.com

sgjk86 said:
i can t run on fastboot the phone stay on screen at first post and notebook not see nothing so i think my last hope is to put firmware in micro sd and try to install from original recovery the firmware i have now.is.the same of this topic
UNLOCK/LOCK Bootloader For ZenFone 3 ZE520KL/ZE552KL
Mod info: Method doesn't work anymore and will result in a hard brick. Make sure you’ve backed up all of your IMPORTANT DATA before unlocking/relocking bootloader I am not responsible for bricked devices and dead SD cards. YOU are choosing to...
forum.xda-developers.com
Click to expand...
Click to collapse
Give it a try!You have all the information to get it working again!Here's the direct link for the firmware straight from Asus.Just pick the one that matches your device and rename it update.zip.
ZenFone 3 (ZE520KL) - Support
www.asus.com

Database Users

welcome