Related
Hello all,
I bought a Galaxy S4 for my partner, and stupidly didn't get it insured.
The screen got cracked quite badly, so fr £120 a local lad put a new screen on. Later that week it got dropped onto mud on the way to nursery and smashed entirely.
I now have a predicament, either give up the phone and go back to my sluggish s3, or ask you guys this question:
Where is the best and most value for money place to get a smashed screen fixed (you can't see anything just a rim of light) somewhere reputable that will use genuine parts and guarantee their work? I really don't want to just leave it on the shelf and am worried that without good advice I will end up with another shabby repair.
Your input would be greatly appreciated.
Many thanks and Happy Christmas,
Ric
If you only break the front glass like what happened to mine, you can get new glass for £5 and DIY. (If you're confident working on things like that - it is a bit of a nightmare of a job to separate the glass from the touch sensor)
But if there's no picture on the screen at all then you've killed it completely. A new full screen assembly is about £90 on eBay I think, so £120 is about the right price for someone to do it for you.
BTW, the first time you broke your screen, if you could still see the picture on the screen was fine, then the guy probably charged you £120 to change the £5 front glass. I've heard of people getting ripped off like that.
Most of the time it is just the front glass that is broken. Unfortunately this latest time, it sounds like you've been unlucky.
You could always take out phone insurance, leave it a couple of months, and then the screen breaks.
knuckles1978 said:
If you only break the front glass like what happened to mine, you can get new glass for £5 and DIY. (If you're confident working on things like that - it is a bit of a nightmare of a job to separate the glass from the touch sensor)
But if there's no picture on the screen at all then you've killed it completely. A new full screen assembly is about £90 on eBay I think, so £120 is about the right price for someone to do it for you.
BTW, the first time you broke your screen, if you could still see the picture on the screen was fine, then the guy probably charged you £120 to change the £5 front glass. I've heard of people getting ripped off like that.
Most of the time it is just the front glass that is broken. Unfortunately this latest time, it sounds like you've been unlucky.
You could always take out phone insurance, leave it a couple of months, and then the screen breaks.
Click to expand...
Click to collapse
ha, the first time the phone broke, my misses threw it against a metal door obliterating the top and matrix thingy so an extensive repair was required. I'm well aware of the £5 DIY jobby hairdryer thing but this second breaking is again both screens, and I don't want a shabby repair I want the original screen part so that it is as strong as it can possibly be. I paid this guy £120, but the screen was so weak it broke dropping on mud! SO I still need to know, where can I get it fixed with genuine Samsung parts? Samsung only? Are the any reputable companies members would use to have their £500 phones repaired?
Thanks to the guy that replied I can't see your name now I'm replying somehow...
In pretty sure there aren't any fake AMOLED screens, not like phones that use LCD - there are hundreds of fake LCD's for those phones. But there are fake front glass panels.
If I wanted to make sure that genuine parts were used I'd order the screen assembly up from eBay myself. You can order it up as a complete front assembly from eBay, and it's a very easy job to change the whole thing over yourself, if you're reasonably confident about tackling things like that. Just make sure it's described as 'Genuine Samsung', and not 'Samsung panel genuine for i9505' or suchlike. If it's described as 'Genuine Samsung', then you have comeback of its not.
I've fixed a good few phones though, and all the times I've ordered parts as I've described above, it has been the real deal. It's pretty easy to tell the fake front glass panels.
Changing the front glass only with hairdryer etc is a sh!tty job, but changing a whole front panel which has the chrome effect plastic trim piece, AMOLED, touch sensor, and front glass already assembled is a piece of p!ss...
I would totally recommend just getting it fixed... plenty of tutorials online to follow. Watch a few of them and see if it is something you are comfortable doing yourself. I've done it and found it to be quite simple. But, it all depends on your comfort level with repairing things...
I think getting it fixed is the idea, yes lol
I was saying though that since it's the whole thing that is broken and needs changed, and not just the front glass, the job is much easier. It's just a case of taking a few screws out and swapping the whole front assembly. On a difficulty rating out of 10 I give it a 4
If you watch a couple of videos on YouTube first, and you take it nice and carefully, I'd say this is a job that most people could handle.
http://www.myfixguide.com/manual/samsung-galaxy-s6-teardown/
Doesn't quite show if the Modem is a separate chip or onboard the 7420.
my 2 cents
Was just about to post this. Thanks!
The battery seems cumbersome to replace. I hate heating things up and removing the glass in fear of cracking it. However, once past that, it looks pretty standard. I'm glad there's no more glue underneath that all.
Being careful, it can be "easy" to change the battery
There is a YouTube video about The Galaxy S6 teardown
https://www.youtube.com/watch?v=_rXLJ2uJWnw&ab_channel=ETradeSupply
they also uploaded to ifixit
https://www.ifixit.com/Teardown/Galaxy+S6+Teardown/38636
Removed some teardown pictures because risk of being reported to sammy.
Exploded
Parts list for SM-G920I
I wish it was a little easier to repair, ala the Nexus 4, which was rather simple to take apart. But really, anyone who has taken apart phones before shouldn't find it too difficult to repair this device. But it looks like most everything is soldered to the motherboard. What will happen if the usb port breaks?
Hi. I just broke my S6 display, just the protection glass ,the touch is working flawlessly even where the display is cracked. I was wondering what do you suggest, to change only the glass (Oca glue /gel ?) or to replace the whole display meaning glass and touch? Please help guys. Later today I will post a picture with the display. Thank you.
demoskino said:
Hi. I just broke my S6 display, just the protection glass ,the touch is working flawlessly even where the display is cracked. I was wondering what do you suggest, to change only the glass (Oca glue /gel ?) or to replace the whole display meaning glass and touch? Please help guys. Later today I will post a picture with the display. Thank you.
Click to expand...
Click to collapse
I only had mine for 5 days, dropped it, and cracked the glass.... a week later, dropped it again, and cracked it even more! I can't believe how slippery the G6 is. Anyhow, I ordered a good case the same day I got the phone, but it's stuck at friggen customs for over a month now... Soon as I get it, going to get er fixed. It's $210 locally rite now to get the glass replaced, or $150 for an insurance replacement. Regardless, going to stick with the messed up screen til I get the case, still works great.
Hi. I found to replace the glass and touch together with 150 . Replacing just the screen I think it's cheaper but I didn't hear good things about this procedure (high possibility to crack the touch or the gluing of the touch and glass it's very hard to get like new). Where are you from? http://www.amazon.co.uk/gp/aw/d/B00...y+s6+parts&dpPl=1&dpID=51nFR7qIK9L&ref=plSrch
I bought a Samsung Galaxy S6. The other day, I happened to break the front glass. The LCD is still fine and the phone works, but the glass is all cracked and a little sharp. So I got a Samsung Galaxy S6 replacement and then followed the video guide to fix it. Now the phone just like a brand new phone.
Long story short, I have a LG G2 VS980W with a busted digitizer and glass. The LCD screen is fine, as there is no discoloration or dead pixels.
If I get it working, it will be used as a toy. I don't want to make a huge investment in it, hence not getting it done by someone else, but I would like it to be as easy as possible. I have no issue going into the components and swapping things within the phone itself, and I have looked up a number of dissemble replacement guides and videos and deal comfortable doing it myself.I have no issue opening the phone, but I never swapped out a digitizer or screen.
Would it be better for me to try and swap out just the digitizer, or get an already assembled screen, digitizer, and glass to replace it all at once?
I'd say you should get a new screen. I got one for pretty cheap Ebay and it's working great.
The screen is pretty easy to break/crack while removing the digitizer.
I bought a Z3 to do this but the screen was shattered (my father, who did this fixes phones/laptops)
Even for experienced people, it is a tough job.
There's a high chance of cracking the glass and ending up wasting your time and money.
I am typing this as I wait for a whole LCD + digitizer assembly for the Z3 lol
Changing this kind of digitizers takes a LOT of patience, a good heater, and the correct tools.
I personally opened like 10 phones already and always perfect, thoug I know my limits and know that I don't have what it takes. ( the phone whould end up smashing the wall for sure )
Seems like spending a little more for the set is easier and safer in terms of me damaging something with this little repair.
Just ordered a replacement LCD, digitizer, glass, and frame off E-Bay for the LG G2!
It was $55, $5 more then without the frame. Having the frame not only makes installing it easier & I don't need to worry about the cracks that are on the current one!
It's coming from China, so hopefully in about two or three weeks I'll have a brand new toy!
Thanks for the input sjk971005 and Chonwey!
Unfortunately my screen broke, the LCD is working fine, and recognizes touches.
Is it possible to change only the glass and digitizer? Eg
I'm afraid of LCD panels from eBay. The service said that warranty is void at all events (even if they repair it).
I'm currently in the same situation. Any update on your phone's screen?
A local repair shop can't fix it unless I buy a panel myself and let them fix it for me. I want to know what I need if the glass is broken, but touches and LCD are fine: just glass or a complete screen replacement, like this one: https://www.aliexpress.com/item/Rau...Panel-Replacement-for-Xiaomi/32835465822.html .
I will order a complete LCD panel with frame and try to replace myself. But I don't know if they are the same quality as original.
erikieperikie said:
I'm currently in the same situation. Any update on your phone's screen?
A local repair shop can't fix it unless I buy a panel myself and let them fix it for me. I want to know what I need if the glass is broken, but touches and LCD are fine: just glass or a complete screen replacement, like this one: https://www.aliexpress.com/item/Rau...Panel-Replacement-for-Xiaomi/32835465822.html .
Click to expand...
Click to collapse
Let us know when you do! Please also specify which replacement you bought. It's a good idea to document these things, because in the coming years many more people will break their screens, unfortunately, but we can help them finding out what screens are worth buying.
I'm especially interested in touch performance and LCD similarity to the original. If you could pay attention to those properties and comment on them when you know, that would be really helpful.
Never try replacing one yourself, no matter how tempting and easy it looks on youtube videos, without proper gears and experience, you will end up damaging the whole panel. I know because I tried and failed myself and ended up buying the whole front panel with the LCD.
It will be much cheaper to buy it off ebay and let a experienced guy do it.
Did you tried with LCD+frame kit? It looks much easier that way. What happened exactly?
billysam said:
Never try replacing one yourself, no matter how tempting and easy it looks on youtube videos, without proper gears and experience, you will end up damaging the whole panel. I know because I tried and failed myself and ended up buying the whole front panel with the LCD.
It will be much cheaper to buy it off ebay and let a experienced guy do it.
Click to expand...
Click to collapse
Sec0nd said:
Did you tried with LCD+frame kit? It looks much easier that way. What happened exactly?
Click to expand...
Click to collapse
I was trying the glass with digitizer which was pretty much cheap, which needs to be removed with proper gears and lot of patience with a heat gun(I have seen local shop guys doing it without them with ease), It was an old samsung s3 which I kept to experiment on, ended up buying the whole front assembly which I did installed successfully(made me feel a lot better). That looks easy and there is less of chance of any breaking, unless you are very careful in removing all the tiniest sensors and wire and put them accordingly, but then you have to carefully pick the whole assembly there are plenty of low quality ones around, where you might get one that gives issues. for instance on Samsung s3 it was an original amoled display. but I got one that was an LCD panel display and there were issues where brightness sensor didn't worked at all.
Your best bet would be an original LCD+frame kit, I don't know if you really can get one off ebay.
So my three advices.
1. try to get only the glass with digitizer off ebay(If your Display works), then let a local expert change it. much cheaper and let you avoid getting a low quality LCD panel.
2. If it's your first time, I would suggest doing it on a cheaper phone to test your skills, I wouldn't recommend doing it for first timers who have no experience of doing it. there is high possibility that you might break a sensor or a wire.
3. if you want to go ahead with a whole new kit from ebay, make sure you check it without removing any sticker, and connect that display with the motherboard and see if the display is really good and make sure you check the brightness and touch. only if you are satisfied then go ahead, or return the product.
Thank you for the advices!
I couldn't find anybody, who can replace only the glass and digitizer.
The screen and digitizer work fine, only the glass is broken.
billysam said:
I was trying the glass with digitizer which was pretty much cheap, which needs to be removed with proper gears and lot of patience with a heat gun(I have seen local shop guys doing it without them with ease), It was an old samsung s3 which I kept to experiment on, ended up buying the whole front assembly which I did installed successfully(made me feel a lot better). That looks easy and there is less of chance of any breaking, unless you are very careful in removing all the tiniest sensors and wire and put them accordingly, but then you have to carefully pick the whole assembly there are plenty of low quality ones around, where you might get one that gives issues. for instance on Samsung s3 it was an original amoled display. but I got one that was an LCD panel display and there were issues where brightness sensor didn't worked at all.
Your best bet would be an original LCD+frame kit, I don't know if you really can get one off ebay.
So my three advices.
1. try to get only the glass with digitizer off ebay(If your Display works), then let a local expert change it. much cheaper and let you avoid getting a low quality LCD panel.
2. If it's your first time, I would suggest doing it on a cheaper phone to test your skills, I wouldn't recommend doing it for first timers who have no experience of doing it. there is high possibility that you might break a sensor or a wire.
3. if you want to go ahead with a whole new kit from ebay, make sure you check it without removing any sticker, and connect that display with the motherboard and see if the display is really good and make sure you check the brightness and touch. only if you are satisfied then go ahead, or return the product.
Click to expand...
Click to collapse
Sec0nd said:
Thank you for the advices!
I couldn't find anybody, who can replace only the glass and digitizer.
The screen and digitizer work fine, only the glass is broken.
Click to expand...
Click to collapse
I saw MiA1 LCD panel, Touchscreen and digitizer which is around $39-$46 on ebay, while I couldn't find just the glass with Digitizer. I think the best bet right now would be with the full kit with LCD. as they aren't selling without the LCD at the moment.
Although I would suggest you keep the original LCD panel with broken glass,(don't try to remove it yet, let the glue wear off itself until then) in case they do start to sell in future the glass with digitizer only. There could be a next time(who knows? or you can just sell that to someone), where you will at least have an original LCD, these things break very easily. be sure to keep them safe, and if you feel confident enough, you can try it yourself, just be careful with the glue, and the pins. go gentle, it's a surgery. best of luck!
I found several glass with digitizer on eBay: https://www.ebay.com/sch/i.html?_fr...RS0&_nkw=Xiaomi+A1+touchscreen+glass&_sacat=0
billysam said:
I saw MiA1 LCD panel, Touchscreen and digitizer which is around $39-$46 on ebay, while I couldn't find just the glass with Digitizer. I think the best bet right now would be with the full kit with LCD. as they aren't selling without the LCD at the moment.
Although I would suggest you keep the original LCD panel with broken glass,(don't try to remove it yet, let the glue wear off itself until then) in case they do start to sell in future the glass with digitizer only. There could be a next time(who knows? or you can just sell that to someone), where you will at least have an original LCD, these things break very easily. be sure to keep them safe, and if you feel confident enough, you can try it yourself, just be careful with the glue, and the pins. go gentle, it's a surgery. best of luck!
Click to expand...
Click to collapse
billysam said:
I saw MiA1 LCD panel, Touchscreen and digitizer which is around $39-$46 on ebay, while I couldn't find just the glass with Digitizer. I think the best bet right now would be with the full kit with LCD. as they aren't selling without the LCD at the moment.
Although I would suggest you keep the original LCD panel with broken glass,(don't try to remove it yet, let the glue wear off itself until then) in case they do start to sell in future the glass with digitizer only. There could be a next time(who knows? or you can just sell that to someone), where you will at least have an original LCD, these things break very easily. be sure to keep them safe, and if you feel confident enough, you can try it yourself, just be careful with the glue, and the pins. go gentle, it's a surgery. best of luck!
Click to expand...
Click to collapse
I love advices like that.U r smart.
I've also cracked my screen.... happened yesterday when I accidentally dropped it on concrete. Touch is working fine, only glass is broken.
So would be buying only the digitizer like this one: goo.gl/ZDPoFd do its job if I let it do at the local repair shop or buy the whole LCD as mentioned above?
Roykooiman said:
I've also cracked my screen.... happened yesterday when I accidentally dropped it on concrete. Touch is working fine, only glass is broken.
So would be buying only the digitizer like this one: goo.gl/ZDPoFd do its job if I let it do at the local repair shop or buy the whole LCD as mentioned above?
Click to expand...
Click to collapse
You're going to need to ask your local repair shop. Some shops will be able to replace the digitzers, others only do the full LCD assembly. Again others will not even accept repairs where you bring in the parts, they'll source the parts themselves.
Localhorst86 said:
You're going to need to ask your local repair shop. Some shops will be able to replace the digitzers, others only do the full LCD assembly. Again others will not even accept repairs where you bring in the parts, they'll source the parts themselves.
Click to expand...
Click to collapse
I've contacted a local repair shop and said they couldn't do only the digitizer, but they can do the whole LCD repair which will cost me 25 euro. Now I have to find the right one..... as you have so much variant on Ebay and Alie. U have a suggestion on which one to choose?
My MI A1 display is craked .but display is working and phone functions are working .just I ask you if I using the craked display for long time is it problem come.phone sold 3 days ago so I cannot want to repair the lcd. .Plz advice
I bought this one: https://www.aliexpress.com/item/Ori...izer-Display-For-Xiaomi-MiA1/32831902856.html
I let a local phone repair shop do the repair for me. They did a great job. The screen itself is also great. I think it could be an original, as I can't tell any difference. The colours seem the same, it measures up to 10 simultaneous touches (like the original), the performance feels identical. I recommend this screen! I've also left a review with pictures on Ali Express, but it's still being processed.
I ordered a white screen for my black Mi A1, so now I have a stormtrooper! (or panda, whatever you want...)
Screen plus repair in total about €60, well worth it IMO. It's quite a fraction of the original purchase price, but hey, I shouldn't have dropped the phone after a month. I've also ordered a plain black back cover to help me better grip the device.
erikieperikie said:
I bought this one: https://www.aliexpress.com/item/Ori...izer-Display-For-Xiaomi-MiA1/32831902856.html
I let a local phone repair shop do the repair for me. They did a great job. The screen itself is also great. I think it could be an original, as I can't tell any difference. The colours seem the same, it measures up to 10 simultaneous touches (like the original), the performance feels identical. I recommend this screen! I've also left a review with pictures on Ali Express, but it's still being processed.
I ordered a white screen for my black Mi A1, so now I have a stormtrooper! (or panda, whatever you want...)
Screen plus repair in total about €60, well worth it IMO. It's quite a fraction of the original purchase price, but hey, I shouldn't have dropped the phone after a month. I've also ordered a plain black back cover to help me better grip the device.
Click to expand...
Click to collapse
Do buttons light work ?
NITRO_100 said:
Do buttons light work ?
Click to expand...
Click to collapse
Yes! See attached images. The LED also works, but isn't on in the pictures.
erikieperikie said:
Yes! See attached images. The LED also works, but isn't on in the pictures.
Click to expand...
Click to collapse
You are lucky then, because it's common for Xiaomi that the buttons won't lite when replacing screen.
NITRO_100 said:
You are lucky then, because it's common for Xiaomi that the buttons won't lite when replacing screen.
Click to expand...
Click to collapse
I didn't know that! It wouldn't have been bad, because I don't like the button backlight at all: it's on for too short, it's too bright, it's not like I can't find the buttons and it's not like I don't know what functions the buttons have... I hope we can turn it down or off in the stock ROM in the future!
hey i was wondering how difficult it is to replace just the front glass and digitizer on my S7E? mine is cracked at the bottom, the lcd and digitizer are both good, but the crack is getting worse and pieces are flaking off so i feel like if i dont fix it it might end up screwing up the lcd. I can get a glass/digitizer assembly for about 35 bucks, but if i buy this am i going to be able to install it without f*kn up my phone? ive been looking at youtube videos n stuff and pretty much every one i see theyre replacing the whole assembly with the lcd, which is like $200, is it possible to seperate the lcd from the glass/digitizer fairly easily at home? or should i just let it be and not mess with it?
Hi to be very honest here I've never ever had to replace or fix the glass to my $7 Edge, my $7 Edge is on excellent condition but I'm thinking of one day either updating to the Note 8 or even Note 9. Have you got any quotes yet from repair places
Sent from my SM-G935F using XDA-Developers Legacy app
BDog21 said:
hey i was wondering how difficult it is to replace just the front glass and digitizer on my S7E? mine is cracked at the bottom, the lcd and digitizer are both good, but the crack is getting worse and pieces are flaking off so i feel like if i dont fix it it might end up screwing up the lcd. I can get a glass/digitizer assembly for about 35 bucks, but if i buy this am i going to be able to install it without f*kn up my phone? ive been looking at youtube videos n stuff and pretty much every one i see theyre replacing the whole assembly with the lcd, which is like $200, is it possible to seperate the lcd from the glass/digitizer fairly easily at home? or should i just let it be and not mess with it?
Click to expand...
Click to collapse
On the newer phones is not really possible to separate the different layers on the display. (even back in the days when the layers where a lot easier to separate - it was hard, only on some displays and always the new layers started to separate leading to dust behind them and so on). You must change the whole screen as a one. Sorry... :/
Im a cell phone repair guy. Like stated above you must replace the entire digitizer/lcd assembly. They are pricey. If you have insurance it may be cheaper. Your looking at $200-$250 for a quality unit.
https://www.ebay.com/itm/LCD-Displa...hash=item4b178e5337:m:mtuyciust4Tmlx1CeklwU-g
Then you will want to get a good tool kit like so. Thats another $60
https://www.ifixit.com/Store/Tools/...pEP-Ge4NWU0H9RKOGFUtVKLOoWZ-d4BBoCMwkQAvD_BwE
Then you can follow this for teardown. Just remember you can damage more stuff when working the first time on something like this. It will cost even more money. It might just be better to use insurance or have a pro do it.
https://www.ifixit.com/Teardown/Samsung+Galaxy+S7+Edge+Teardown/56845
BDog21 said:
hey i was wondering how difficult it is to replace just the front glass and digitizer on my S7E? mine is cracked at the bottom, the lcd and digitizer are both good, but the crack is getting worse and pieces are flaking off so i feel like if i dont fix it it might end up screwing up the lcd. I can get a glass/digitizer assembly for about 35 bucks, but if i buy this am i going to be able to install it without f*kn up my phone? ive been looking at youtube videos n stuff and pretty much every one i see theyre replacing the whole assembly with the lcd, which is like $200, is it possible to seperate the lcd from the glass/digitizer fairly easily at home? or should i just let it be and not mess with it?
Click to expand...
Click to collapse
Well yeah its really hard to do it yourself, but changing only the glass is possible. I have tried it on my old samsung galaxy s6 edge. Although i have brought it to a repair shop which supports such change. They use a special separation machine. Try asking around your place. Btw, where you from?
awerqw22 said:
Well yeah its really hard to do it yourself, but changing only the glass is possible. I have tried it on my old samsung galaxy s6 edge. Although i have brought it to a repair shop which supports such change. They use a special separation machine. Try asking around your place. Btw, where you from?
Click to expand...
Click to collapse
nebraska
BDog21 said:
nebraska
Click to expand...
Click to collapse
So were continents away. Lol. Buy yeah its possible, with the right tools. You can do it yourself but its very risky. Some do it manually some use tools. Some separation machines use dry ice.
Also, remember that if you're replacing the entire OLED, glass and digitiser as a single unit, if you're buying a generic replacement rather than Samsung parts, the OLED panel in particular could easily be of inferior quality. Or perhaps not even OLED at all, rather a standard LCD replacement. I'd rather not think of this phone without the quality of screen it has, it's half the appeal and what makes it a premium device in the first place.
its possible, repair is done within 3h.
you can try it at home, you need slim cards and wire, but it's not worth the risk.
I paid 120$ in Poland for glass replacement. they have separating machine - it freeze the glue so it's easy to take the glass off the screen. later it's just loca or oca