Database Users

[KERNEL]05.12.2011 test-kernels [CM7/MIUI] platypus;SECURITY,VOODOO,OC/UV,nodebug,...

I'M A SUPPORTER OF BRINGING OFFICIAL ICS TO THE VIBRANT AND OTHER GALAXY S DEVICES!
> CLICK HERE FOR MORE INFORMATION <​
Click to expand...
Click to collapse
CAPTIVATE edition of the Platypus Revolutions kernel
This Project is inactive/low activity for a longer period of time
Kernel
CM7 & MIUI only
NEO series
(since May 24th '11)
Do you want to discuss on this kernel, get the news on the current state of development, or test kernels even fresher than fresh ?
connect via webchat from your browser:
http://webchat.quakenet.org/
and join #platypus-kernel
(recommended)
Fire up your IRC client, and join via client
the server (for now is) : irc.quakenet.org
port : 6667
Channel : #platypus-kernel​
(thanks to Tk for the layout idea )
before you ask for any ETAs:
The first rule of CyanogenMod [and this project]: DO NOT ASK FOR AN ETA!
---------------------------------------------------------------------------------------
First step before install & kernel switch:
Always have this cleaning script on your internal SD card ready
If you're
- switching kernels,
- have issues with auto-rotation,
- the cam,
- bootloops
- want to remove init script
- recover from a failed overclock attempt
please give either:
- lippol94's updated cleaning script (apply via CWM recovery): http://www.multiupload.com/XFH1GCK4MB
or
- WiwiPouPou's SYSTEM CLEANER SCRIPT (also apply via CWM recovery): (http://forum.xda-developers.com/showpost.php?p=14805606&postcount=21739)
a try
the kernel already applies some cleaning steps during install but sometimes that's not enough ...
---------------------------------------------------------------------------------------
Introduction:
Hi guys,
this is my first modded kernel for the SGS (CM7/MIUI only)
I first needed to test it to make sure that it'll be stable & boot at the first place
so far it's very fast & responsive & smooth
This thread shall serve as the center for my testing kernels (stability & functionality-wise)
DISCLAIMER: the kernel (binary) and driver modules are provided as is. If problems occcur they most probably are from upstream and can be fixed with the newest version. Since I'm doing this in my free spare time as a hobby (quenching my thirst for tweaks & performance) updates will occur irregularly as time permits and I see fit (most probably when new features & bugfixes arrive). YOU are responsible for the actions that you take (such as over- or underclocking), etc. You agree that I can not be held liable for any potential damage that arises from your actions in combination with or the usage of this kernel and other related parts.
Kudos:
* Google, Andy Rubin & the whole Android crew
* Linus Torvalds & the kernel hackers for upstream Linux
* cyanogen & all the devs out there hacking on this
* Supercurio for enriching our media experience of this smartphone
* codeworkx, coolya, guiper, atinm - the whole teamhacksung|cmsgsteam crew and all other hackers working on CM7
* laststufo, hardcore, nikademus, existz and all the other kernel hackers on the SGS forum
* zen-kernel team for inspiration to create a kernel, too
* all other contributors (devs, users, etc.) who make this possible
The purpose of these kernels is extensive stability testing addressing the following sticking points:
- overall stability & functioning of the kernel and phone
- call drops, missed calls, etc.
- lags (suggestions for improvements are welcome)
- auto-rotation, sensors, etc.
- Voodoo Control Plus [any crashes ? compatibility problems ?]
- working on CM7 or MIUI ?
- scheduler, sound, video synchronisation & lags: Tap Tap Revenge 4 (especially at the beginning of songs)
- scheduler, sound, video synchronisation and any other issues: doodle dash (while shooting & sound activated)
- proper pmem memory layout & settings: proper functioning of Google Googles
for those who love SAUCE (Source):
old source:
ALL MY SAUCE for QUORRA KernalZ ^^
new source:
android_kernel_samsung_aries
(fork and 1:1 update to upstream kernel source - changes in different branches)
(latest changes sometimes might not be in [yet] but in the whole repo everything should be available)
current UV & OC stable values:
Recommended apps for OC/UV:
- Pimp my CPU (also available here on XDA for those who don't have a credit card, etc.)
- Xan's VoltageControl
on stability testing:
http://forum.xda-developers.com/showpost.php?p=13255871&postcount=5
(start with "Q: I'm new in OC/OV operations so please could you explain to me how to set it in the best way?")
the following OC/UV values are only applicable for kernels with the old OC/UV implementation (max. 1.3 GHz)
my current UV (undervolt) stable Values :
old OC/UV implementation (morfic, bilboa1/kang, TheEscapist):
1300000 0 (haven't tested 1.3 GHz much yet)
1200000 -25
1000000 -50
800000 -75
600000 -100
400000 -100
200000 -125
100000 -150
edit:
1200000 -50
1000000 -75
800000 -75
600000 -225
400000 -125
200000 -150
100000 -175
thanks jetcz !
new OC/UV implementation (morfic, bilboa1/kang, TheEscapist - Tk-Glitch):
Tk-Glitch said:
Note that these UV settings will be unstable on many devices. It's only informative.
1600 MHz - 1.500v / -> That's high and many devices will fail on this frequency. Find working UV for you if any.
1500 MHz - 1.500v / -> That's high and many devices will fail on this frequency. Find working UV for you if any.
1440 MHz - 1.475v / -75mv
1400 MHz - 1.450v / -75mv
1300 MHz - 1.400v / -75mv
1200 MHz - 1.350v / -75mv
1000 MHz - 1.250v / -50mv - If you have stability issues, try to let this one by default.
800 MHz - 1.200v / -75mv
400 MHz - 1.050v / -100mv
200 MHz - 0.950v / -150mv
100 MHz - 0.950v / -200mv - (can be very different between two devices)
More volts is not always equal to more stability. Try to add more UV (less volts) if the frequency you're trying to achieve is unstable.
Considering all phones will respond differently to OC/UV, to tweak the values to suit your device will be required.
By default, no overclock/undervolt is applied. You'll need to use one of the tools below to adjust the frequencies and voltages.
Note : Never ever use SetCPU with this kernel. You could encounter many stability problems like random reboots or bootloops.
Click to expand...
Click to collapse
3D performance and games:
recommended apps:
[root] Chainfire3D

1st backup post (kernels)
Kernels:
kernels are listed in descending order
older -> newer (newest at the bottom - for now)
officially declared new stable kernels will be up soon !
for now please go to the IRC channel (1st post to get the newest test-builds)
NEO 17 -r12 codename: Butterfly
http://forum.xda-developers.com/showpost.php?p=17339783&postcount=21
NEO 17 -r18 codename: Butterfly
http://forum.xda-developers.com/showpost.php?p=18268518&postcount=132
NEO 18-update1 codename: funky fish
NEO XX.1-update1 codename: mighty rhino
http://forum.xda-developers.com/showpost.php?p=19999998&postcount=192
ALL USERS MUST UPDATE (this fixes yet another potential data loss trigger)

2nd backup post (Changelogs)
Changelog list:
obsolete right now

3rd backup post (modems list)
modems:
Description:
Modems play a crucial role in how much battery drains in standy.
e.g. if you have a good signal area and the modem still has high
"Time without a signal" indicator under Cell standby you still will get bad standby time
make sure you have little to no "Time without a signal" in Cell standby
there also somewhat seems to be a connection between "Time without a signal" and high "Android OS" number in battery use (!)
Following modems are only compatible with new radio (modem) partition layout:
radio-cm-7-GalaxyS-JVP-signed.zip (4.29 MB)
md5sum: fb38dbf82daf0720fd2328f5f649013e radio-cm-7-GalaxyS-JVP-signed.zip
For more modems & bootloaders please go to siky_dude's Modem Thread:
[CM7/MIUI][28.08.11] Modems + Bootloaders(MD5)
[SGS / i9000 Thread so some frequencies might be missing, e.g. 850 MHz]
for more modems please refer to a modem thread in the Captivate Forums section

4th backup post (results)
Results & FAQ/Documentation
Results:
(04/27/2011) Results for platypus-kernel_20110427_18_quorra_r1:
- broken auto-rotation & sensors for some [insert ROM (CM7 ? MIUI ?)]
- stable
(05/03/2011) Results for CM7_SGS_platypus-kernel_20110503_17_quorra-r4_exp
- high battery drain, either due to kernel config or optimization flags, fixed with >= quorra r5 (2nd update)
FAQ / Documentation
@bootloop / boot post victims ^^
Hi guys,
could you please try to replace the existing kernel on your MIUI or CM7 nightly CWM-Package with my kernel, modules and its scripts ?
then install that updated package (with the new kernel, modules and scripts)
after that all should work
the bootloops seem to be an issue with bml_over_mtd (broken sectors on the SSD on your phone)
I'll investigate this and see if anything needs to be rewritten and/or updated in that regard
Thanks !
Overclocking / Undervolting:
Q: I'm new in OC/OV operations so please could you explain to me how to set it in the best way?
A: start with -50 mV (delta from default value) other values probably are too low
my testing includes:
- Angry Birds Rio (several missions)
- Gun Bros (for some time)
- mp3 playback, (flac playback - optional)
- surfing the web via browser, opening up bit.ly links from cmsgsteam twitter feed
- watching youtube video
- watching video via rockplayer lite or mobo video player
- running benchmarks (Smartbench 2011, quadrant standard, an3dbenchXL, anTutuBench)
- Labyrinth Lite (for gravity sensor), auto-rotation (also for sensor)
when 1 GHz (1,2 or 1,3) is OK - go lower with undervolt value (e.g. -75 mV)
after it gets un-stable - go back to last known stable value
then you can limit max frequency to lower one, e.g. 800 MHz
and repeat testing for that frequency
for more info: checkout shaolin95's Mini Overclocking Guide:
Link: http://forum.xda-developers.com/showthread.php?p=12910471#post12910471
LED Support FAQ
Q: Do LED notification require an app, such as BLN, etc ?
A: No. It uses Android's and Cyanogen settings, other apps are not required, although some that are designed for regular LEDs may work.
Q: How to I turn off LED notifications, scheduled or/and complete turn off?
A: Use Cyanogen's Quiet Hours feature (settings>cyanogen>sound>quiet hours) and check "Dim the LEDs during quiet hours" (in reality it will turn them off on the SGS). If you schedule a complete day, then LED notifications will be off all the time.
Q: How do I setup per app, find other LED settings etc?
A: Settings>cyanogen>interface>LED notifications
Q: What to do with LED color settings?
A: We have only one color, so that doesn't work. Use Green as default setting. Some non-bright colors turn off notification, as it's the equivalent as diming LEDs (note that on real LEDs if you dim them too much they look like off too anyway, the difference is that it's gradual. On the SGS the LEDs can be only on or off, not gradual)
Q: How can I troubleshot my system, I can use ADB but...
A: adb logcat | grep lights (on linux) will show you Android requests to turn LED on or off. "status" tells you what we decide will be interpreted as "turn LED on" (1= on, 0 = off)
adb shell cat /proc/kmsg for live view (or adb shell dmesg if you're using adb after the issues occurs - careful the backlog is limited in size so don't be too slow)
notify_led_on and notify_led_off are requests to the kernel to turn LED on or off.
touch key write/read errors (cypress) are non-fatal failures to ask the touch key to do something (eg lit up the LED), when the hardware goes crazy or there's a logical error in the code (can be both)
touch key recovery routine or "stopped responding" are either hardware errors, either a logical error where the driver would try to write something the touchkey doesnt understand. in some occasion lock&unlock fix those as a work around, of course a permanent fix is required
Voodoo Color settings:
Q: I don't have that nice ice-ish white color on my screen anymore - you suck !
Q: my screen looks like someone pissed on the screen - you suck !
(sorry for the language ^^)
A: I love you too ^^
download Voodoo Control or Voodoo Control Plus
Screen RGB multipliers:
- Red: 321*
- Green: 321*
- Blue: 429*
Screen v1 gamma hack:
- use Alt. settings
- or if you prefer others - use: "Reset to 2.3.3 defaults", "Punchy settings" (punchy could lead to a great screen while locking the screen and having "screen off" animation disabled)
other recommended settings:
Also a lil tip for people who use voodoo color!
1 )Color Profiles: Voodoo Profile V1
2 ) Screen v1 gamma hack :
- 50 red
- 53 green
- 44 blue
3 ) SRB multipliers:
Red ="2300875360"
Green ="2300875360"
Blue ="2709919680"
With those adjustment, black colors are BLACK and white colors are WHITE. Everyone should try this.
Click to expand...
Click to collapse
SGS CM7 nightlies wiki
http://sgscm7nightlies.pbworks.com/w/page/41483487/FrontPage
Android OS bug, :
(thanks to ceriko ! and his awesome guide for DarkyROM 10.1)
If your battery drains very fast and your battery stats mentions Android OS above 10%, often between 40 and 60%, sometimes more, this is the best to do as far as I know:
- Remove the 2/3 system files as per the beginning part of this guideguide about batterie issues.
- Install WatchDog and open (I set it to "moderate", then I close it, that's all), this app will warn you whenever an app or a process miss-behaves by draining the battery excessively. It will not fix it but just flag it and you will see a notification.
- Reboot usually stops the drain for a while until it naturally comes back, so reboot whenever you see Android OS above 10% and rising or after you see WatchDog mentioning "Suspend" process using too much battery (the suspend process hanging is the Android OS bug).
- Some apps trigger it, most common are Gameloft games (blame Samsung, not the games/apps). No need to use apps or games for this drain to happen, it also happens straight after boot once phone has been fully charged.
This bug can not be fixed by anyone but Samsung. Some never see it, some will experience it everyday no matters what they do... It's just annoying and unfair but that's the same on all Gingerbread releases by Samsung (JVK, JVB, JVO, JVH). Apparently even the SGS2 has this...
screenstate scaling aka my governor won't change after screen locked:
So what is this all about ?
it's an init script that is put in to /system/etc/init.d
and switches between the configured governors in the script
depending on whether the screen is on (AWAKE_GOVERNOR) or off (SLEEP_GOVERNOR)
in most cases your phone is off - in that case it would be good to use a governor which doesn't fire up the cpu frequency too fast since you don't need it (no GUI, smooth scrolling, etc. needed while the screen is off - lol),
so conservative governor is set
when using the phone (screen on) it really depends on what you want to do: e.g. latency & smoothness is crucial: try smartass2, smartass, ondemand;
you're mainly browsing & reading stuff: try ondemandb, conservative (the screen is already burning enough battery so you don't need another component burning yet more)
only use one governor at a time
e.g.
AWAKE_GOVERNOR
# AWAKE_GOVERNOR
# AWAKE_GOVERNOR
SLEEP_GOVERNOR
# SLEEP_GOVERNOR
# SLEEP_GOVERNOR
that means lines with "#" are commented out and not used by the script
e.g.
# AWAKE_GOVERNOR
AWAKE_GOVERNOR
# AWAKE_GOVERNOR
SLEEP_GOVERNOR
# SLEEP_GOVERNOR
# SLEEP_GOVERNOR
also would work (intentionally not filled in any governors)

@all:
Neo 17 r10 is available on IRC !
Changelog said:
NEO 17 (r10 - codename Butterfly) changelog [SGS/Telus, Captivate, Vibrant]
Changes (from r9 - 2nd testbuild):
• bumped RAM up to 348 MB (everything should still work, incl. Youtube HD recording)
• ported over smartass2 governor (super-smooth & battery-efficient, hopefully no issues anymore with getting stuck on high frequencies - unless due to system & broken apps)
• back to cm7 vanilla/stock yaffs2 driver - let's see if this fixes the discouraged random resets for few people (loss of contacts, apps gone, etc.)
Click to expand...
Click to collapse

Wow! New thread finally!
I'm testing with the Neo 17 R10 Kernel now.
Thanks!

Woohoo!
Sent from the frozen tundra known as Canada.

Spectacular. Gave it a shot from r7 and loving it since. Looking forward to future updates.
And about time for your own thread!
Sent from my I897 using Tapatalk

Thanks for the awesome kernels, they always work great, and I always look forward to the progression of this kernel. Thanks again for all your hard work, you are very talented.
Sent from my I897 using XDA App

I'm loving it as well, I don't oc much, maybe uv a little, and I do like the vc. Great work.
Sent from the frozen tundra known as Canada.

Thanks zach, r11 + smartassV2 is really super-smooth! You are doing an amazing job.
No problems so far, I got my last SOD on r9.

So on Neo 17 v11 what is set for governor(not showing in pimp)?? I got confused when reading the whole thing. Plus did you say it won't change from awake governor to sleep governor with the screen off? If so how do I make it so it does?? I don't see a screenstate scaling in root exploring under the right location. I have in the past but.can't now.
Sent from my I897 using XDA App

buresh.kevin said:
So on Neo 17 v11 what is set for governor(not showing in pimp)?? I got confused when reading the whole thing. Plus did you say it won't change from awake governor to sleep governor with the screen off? If so how do I make it so it does?? I don't see a screenstate scaling in root exploring under the right location. I have in the past but.can't now.
Sent from my I897 using XDA App
Click to expand...
Click to collapse
Uninstall Pimp My CPU.
Delete the Pimp My CPU folder in your SD Card.
Reflash the Neo 17 R11 Kernel and the V51 Script again.
Install back Pimp My CPU.
OK, you'll see the Governor and Scheduler which already been set by Neo 17 R11 Kernela and the V51 Script.

the new platypus 17r11 is superfast, my CAPPY felt great with it
thanks Zach
hope the color issue soon to be fix since i like to customize the color temp

Fate-Silver said:
Uninstall Pimp My CPU.
Delete the Pimp My CPU folder in your SD Card.
Reflash the Neo 17 R11 Kernel and the V51 Script again.
Install back Pimp My CPU.
OK, you'll see the Governor and Scheduler which already been set by Neo 17 R11 Kernela and the V51 Script.
Click to expand...
Click to collapse
Did you have this problem as well?? ha! I found the V51 Script, I think!
I tried to change awake governor but it's not showing in Pimp my Cpu. I rebooted, tried deleting & installing it again but no luck.
I edited the script with text editor from Root Explorer, put # infront of ondemandb, and took # from smartass2. Rebooted but pimp my cpu is showing ondemandb.

hi. can you flash this using the orange cwm that comes with cm7?

yuhenyo said:
hi. can you flash this using the orange cwm that comes with cm7?
Click to expand...
Click to collapse
Yes you can.
Sent from my I897 using Tapatalk

simple man said:
Yes you can.
Sent from my I897 using Tapatalk
Click to expand...
Click to collapse
awesome! can't wait to flash this. So is the download link in the other thread? I can't seem to find it on this one. or is it?

yuhenyo said:
awesome! can't wait to flash this. So is the download link in the other thread? I can't seem to find it on this one. or is it?
Click to expand...
Click to collapse
http://webchat.quakenet.org/
The instructions are in the O.P., but you'll need to login, download the file, extract the unpack_me.zip pick the kernel of your choice, download the kernel cleaning script 1st page this thread,flash it, then your kernel, then the screen state script.
Sent from my I897 using Tapatalk

[Unofficial] Boeffla Kernel Profile Sharing Thread

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Welcome to the Unofficial Boeffla Kernel App Profile Sharing Thread​
Introduction
This idea was tossed around in the Boeffla Sammy Kernel thread so I decided to make one here in the General Section so that questions regarding user profiles would not clutter up the main thread.
If you want to share a profile, just upload it to your host site so that other users can grab it
For those that want to implement other user profiles to their device, simply grab the .bcprofile profile and place it in the boeffla-kernel-data directory in your internal storage and then open the Boeffla Config app and load the profile in the upper right corner of the screen.
oh, and one last thing..please remember that the Galaxy S3 is a diva and will not behave in the same manner for everybody..we all have our own unique usage patterns, so dont expect that one profile will be as effective on one device as the other..you may always tweak a profile once you download it so that it will fit your preference
=============================================================================================================================================
Read posts #2 and #6 for explanations on some configurations and settings.
All shared profiles are listed at post #3 while activation procedure is at post #4
For kernel updates and download head over to Official Boeffla-Kernel website.
For discussions regarding development, and we mean DEVLOPMENT ONLY, head over to the Boeffla Sammy Kernel thread, and Boeffla CM11.0/Omni/CM10.x thread.
All credits goes to @Lord Boeffla for an amazing kernel. :good:
**Fan teaser created by mateepunkt !**
​
First things first:
For those asking what config is best for which rom, THERE ARE NONE. All configs shared here are cross compatible with all roms. Ok, not all, since they are bracketed into Touchwiz and AOSP configs, but you get the idea. For all first timers, please try out Archi's and Lord Boeffla's and metalgearhathaway's configs first. I've been saying that for quite some time now. You can also use those profiles as basis for your own, which you can in turn share with everyone else.
​
For a comprehensive guide on all things that can be tweaked in a kernel, please read up on the following write-up by @gsstudios :
Some of the governors and schedulers and other kernel features are not implemented by @Lord Boeffla on his kernel, so just read up on those that are included in the Boeffla Kernel.
gsstudios said:
The following information is taken from my website (android modders guide)
If you want the latest bleeding edge information, visit my website
www.androidmodguide.blogspot.com
to continue reading, click here
gsstudios said:
The credits list:
Stempox
Hipkat
Knight47
Droidphile
Haldi
Matmutant(Andrux&me)
And all of the other XDA members and other people who came up with some other descriptions (To be updated)
Click to expand...
Click to collapse
Click to expand...
Click to collapse

A few things explained:
PIRATA! said:
Thank you for your reply, and I have to say that I have to ask you a couple of things because you know the poor situation I'm in.
First of all, what does it happen if I uninstall the samsung push service? What I will not have any more?
What happens if I greenify to hibernate google play services as you say? Same question as above... Does it still receive Play Store automatic updates?
My connection is not the most perfect of ever as I continually switch between 3G and 2G due to my provider. Can't do anything about that. In such a way, I can say that I always have signal, wherever I go. Then, I have to say that I use a lot my device for internet, and in 2G it's toooo slow for use, I tried, especially because my provider is an H3G provider that users 3G a lot. Here in Italy using 2G connections it's some kind of bad for internet. Some provider do, bit Theo are quite slower. Maybe battery drawning for this it's the price to pay. I'll anyway put an eye to the app you say and see what it does, tnx!
My screen is always at minimum bright, and often use ScreenFilter to 40%, so I would not consider that too much, no?
About lockscreen effect - water droplet and all the sounds, well the water drop sound is off, and about the other like key pad it's also off. But I have to say that I keep my phone quite constantly in vibration mode, so dunno if sounds events are called anyway if active.
The only one it's active it's touch keys vibration because I like to feel that!
The water drop at lock screen is there, and the reason is that I have a Samsung phone and I like that unlock method. You say that it drains a lot of battery?? I should really change that?
Maybe I should first of all put my hands on the processes that run in background and in the kernel settings.
I am with PegasusQ battery, row with 512 on internal sdcard, cfq with 1024 on extsdcard, AFTR-LPA Aggressive, no cpu OC/UC, no cpu UV, some gpu freqs lowered at low steps, but still the same at high steps so to have stock freqs in games, some general gpu UV, screen touch boost at 600, Boeffla sound with all active minus the Mono output, Frandom tweaks, 4 zRam at 200 with 80%, stock LMK, no logging.
Hope to have said all.
Should I look at you second post I quoted down here for the file you linked and freeze/uninstall most off the apps listed there, and then greenify most of the remaining, keeping an eye on the system ones like you did??
Click to expand...
Click to collapse
axetilen said:
1/ samsung push: nothing happens if you dont use any samsung apps like chatOn. opne play store and search for samsung push service -> read the description and you will see -> reduce a lot of wakelocks according to your BBS
2/ Greenify play store: you may lose autoupdate but they will be triggered again when play service is activated -> you dont lose any update but it is slower than normal. I recommend you to turn off autoupdate in playstore settings and update apps manually. Autoupdate is reported to consume Ram and battery -> this will reduce a lot of wakelocks (A LOT)
google play service was updated to v4.1 and claimed to save a lot of battery. I dont care, I turned it off
3/ Only use 3G when you need to surf the web. Use 2G when you put your phone in the pocket or only when you use IM chat apps like viber and whatsapp. Im fine with these
also try intelli3G. I have never used it but I think it helps
4/ using lowest brightness is very good. Use autobrightness at the lowest level in outdoor conditions
5/ DONT USE PegasusQ with AFTR+LPA -> your phone cant reach deepsleep state
If Im not mistaken, I read this from somewhere that if you use AFTR+LPA, your phone can only go to deepsleep only when there is 1 core running. If there are 2 cores running, it prevents your phone to go to deepsleep
usually, pegasusQ keeps 2 cores running and maybe switches off 1 core after a period of time (I dont know when) -> goes against AFTR+LPA
pegasusQ battery saving & pegasusQplus battery (maybe there are some more but I dont remember) are the only governors that switch off the 2nd core quite fast so if you use these, it's fine but in general, I dont recommend to use pegasus with AFTR+LPA
I use zzmoove yank battery extreme instead. If I wanna play games, I use pegasusQ battery
with exactly the same configurations, PegasusQ battery seems to be slower and makes my phone hotter than zzmoove yank battery (dont know why). It got 44*C, never happens with zzmoove. Both are set at 1.2ghz, same GPU, same UV
I monitored the behaviours of these. However, because the overheat, I cannot go with pegasusQ battery
6/ turn off all sounds and effects and see how it goes. In the older versions of touchwiz, they are reported as the culprit of using too much ram and causes too many wakelocks. I dont know sammy do fix this or not because I always turn them off from the beginning
I dont recommend using CFQ with extSdCard because according to a credible source - thanks droidphile:
it might causes problems with mediascanner. I prefer SIO and ZEN. In fact, changing these in the extsdcard doesnt bring noticeable difference, quite minor in my experience because we dont always use sdcard and the speed of this is limited. You may see noticeable improvement with internal storage
7/ you should consider the list of frozen apps. you will have more free ram because useless apps are removed. They wont consume ram and battery and cause wakelocks.
if you have a look at my screenshots, you can see, AndroidOS only took 4% -> I was surprised also, couldnt believe that. I only have ~2 minutes of wakelock in 11 hours of deepsleep. I use facebook + fb messenger + viber, they cause wakelocks. I dont greenify them
I dont dont know. there should be soneone who has time and do a lot of benchmark tests to conclude. IMO row is very very fast but writting speed is slower than the others (read over write) and battery might be a bit worse. ZEN I have no idea but it is fast and works well. Andi said it saves some battery so I use ZEN. I dont have time to test. negligible difference because s3 is a flagship. It is easier to conclude in a cheap phone
try zzmoove. Pegasusq battery mostly uses 1 core so it would cause some delay. check your battery, maybe it gets bigger => not good => considered to be replaced. If it is bigger, input current is not enough to keep phone working (quite similar to undervolt) => stucked
moreover, maybe your free ram is too low that makes it slow. increase empty app to 110 or 128. change content provider to 100
Click to expand...
Click to collapse
Why can't you activate a downloaded profile?:
Lord Boeffla said:
Guys, this is always the same: If this message comes up, the file which should be imported does not have the correct format.
This can happen when a download is incomplete, when browsers think they need to modify the file in any way, when there is any other corruption etc etc.
In order to check if a file looks alright, open it on a PC and check if it has:
- At the start of the file the sequence {"data":{
- At the end of the file the sequence }}
- There must be no line breaks at all in the file
It is nothing else than a JSON file, so you can open it in any text editor to see what is in.
Andi
Click to expand...
Click to collapse

LIST OF SHARED PROFILES:
Lollipop/Android 5.x KERNEL PROFILES:
@metalgearhathaway Profile
metalgearhathaway's MGH CM12 Intelliactive V3
============================================
@ivano949 Profile
ivano949's Zzmoove insane tunable personal
============================================
@arminbih Profile
arminbih's profile
============================================
@ansh1996 Profile
aroransh96.bcprofile
============================================
============================================
SAMMY 4.4.2 Port KERNEL PROFILES:
@metalgearhathaway Profile
MGH Ondemand for Sammy 4.4.2 Ports
============================================
@S1ay3r666 Profile
Slayer-Balance.bcprofile
============================================
Mine
sammy kk experimental (aggressive LMK)
New KK (close to stock LMK)
============================================
@Mostafa Wael Profile
My QS Profile
============================================
@myshakugan Profile
myshakugan Profile
============================================
============================================
SAMMY 4.3 KERNEL PROFILES:
Archi Profile created by @JustArchi [note: right click on raw and select 'save link as']
Archi_UltraPowerSave.bcprofile
Archi_Performance.bcprofile
Archi.bcprofile
============================================
@Lord Boeffla profile
Andi2.bcprofile
============================================
@metalgearhathaway Profile
metalgearhathaway's MGH Sammy Ondemand v5
MGH zzmoove v2 WIP
============================================
@mad_ady profile
mad_ady's profile
============================================
Mine
Sammy.bcprofile
============================================
@broken920 profile
broken920.bcprofile
============================================
@mad_ady profile
LowCPU.bcprofile
============================================
@nikamuze profile
nikamuze-dailyuse battery
============================================
@inooni profile
ino's battery
============================================
@aliw32619 profile
aliw32619's Battery profile
============================================
@Hidden-Hunter profile
Hidden-Hunter's profile
============================================
@nikamuze profile
nikamuze profile
============================================
@philljoynes profile
Phills settings
============================================
@illuminato 67 profile
1.bcprofile
============================================
@ymy3890 profile
cymy
============================================
@PIRATA! Profile
PIRATA_UltraPowerSave
============================================
@gvmiguez Profile
gvmiguez profile
============================================
@Moster2 Profile
boeffla-uv-battery
============================================
@danierakes Profile
Simple
============================================
@stoianmitkov Profile
stoianmitkov's super profile
============================================
@Droopdead Profile
PerfilLulzactiveq V2 profile
============================================
@Choristav Profile
New3 profile
============================================
============================================
CM11/OMNI KK KERNEL PROFILES:
============================================
@kazuya_kun Profile
kazuya_kun profile
============================================
@JustArchi Profiles [note: right click on raw and select 'save link as']
Archi_UltraPowerSave.bcprofile
Archi_Performance.bcprofile
Archi.bcprofile
============================================
@metalgearhathaway Profile
metalgearhathaway's mgh v4
mgh boeffla ondemand v2
MGH [CM] Light User Ondemand A2DP-100mb zRam Max OC-Max Battery!
============================================
@murasama Profile
OmniBalancedOCnoUv profile
============================================
@Choristav Profile
Choristav profile
============================================
@dr.Arsla Profile
drArslaBattery.rar profile
============================================
@qrashers Profile
qrashers Galaxy SIII PLP profile
============================================
@muncheno Profile
muncheno profile
============================================
Mine
archidroid_2.x_omni_daily
temasek CM11 profile
============================================
@szunyi77 Profile
muncheno profile​
============================================
============================================
Config App Download:
Boeffla-Config-v2
Boeffla-Config-v2 DIRECT LINK​
============================================
============================================

Awesome man
from my I9300 omega 54 tapatalk

HOW TO ACTIVATE A PROFILE
1) download .bcprofile
2) put it into /data/media/0/boeffla-kernel-data
3) activate profile through Boeffla Config V2
4) open Boeffla Config V2, tap on DEFAULT, then LOAD FOREIGN, choose downloaded profile, activate it in the list (it should be blue) ​
Image guide:
step1:
step2:
step3:
step4:
step5:
​

More Things Explained:
ASV Level Explained:
Lord Boeffla said:
Samsung bins their chips according the ASV level, which can be thought of as the "quality" of the chip. The higher the ASV number, the better the chip, and the less power it needs to do its job. At the factory they mix increased gate voltages with varying body voltages to end up with a table of stock body biases. Long story short, this is how they deal with less-than-perfect chips. It's a lottery for the buyer. But since their values aren't tailored to your chip - the hope is that maybe you can scrape by with a bit less power than Samsung thought a chip of that grade could.
So in short: It tells you about which voltages will be used by your Exynos processor. Good ones can run with lower voltages, worse ones need higher voltages.
The asv level is used to look up the voltage table during bootup and initialisation phase.
Andi
Click to expand...
Click to collapse
Low Memory Killer Explained:
Papa Smurf151 said:
Explanation of LMK Settings (Low Memory Killer)
and
Explanation of Adj and Minfree settings
When your phone boots up, a file inside the boot image (init.rc) sets the system parameters. Things like the path to framework files, setting up your networks, and setting the limits at which programs are killed off to free RAM are done by this file. Now a super-Android-geek might dig inside the init.rc file and completely customize the low memory killer, but you don't have to do this to still get good results. The init.rc sets up six different "levels" of open applications. Let's have a look at them:
FOREGROUND_APP: This is the application currently on the screen, and running
VISIBLE_APP: This is an application that is open, and running in the background because it's still doing something
SECONDARY_SERVER: This is a process (a service that an application needs) that is alive and ready in case it's needed to do something
HIDDEN_APP: This again is a process, that sits idle (but still alive) in case it's needed by an app that's alive and running
For the most part, we never want to adjust when these apps and processes are killed off. They are the things that the programs we use need to properly function. For the more bold and advanced users, changing settings for HIDDEN_APP settings is possible, albeit with a LOT of trial and error. There's two more settings, and these are the ones most interesting to us today:
CONTENT_PROVIDER: This is apps that provide data (content) to the system. HTC Facebook Sync? That's a CONTENT_PROVIDER. So are things like the Android Market, or Fring. If they are alive, they can refresh and provide the content they are supposed to at the set interval. If you kill them, they can't of course.
EMPTY_APP: I call these "ghosts." They are apps that you have opened, but are done with them. Android uses a unique style of handling memory management. When an activity is ended, instead of killing it off Android keeps the application in memory so that opening them again is a faster process. Theses "ghost" apps use no battery or CPU time, they just fill RAM that would be otherwise empty. When this memory is needed by a different application or process, the RAM is flushed and made available for the new app. To satisfy the geekier people (like myself) Android does this by keeping a list of recently used apps, with the oldest apps in the list given the lowest priority -- they are killed first if RAM is needed elsewhere. This is a perfect way to handle 'ghost' processes, so there's no need to touch this part
So when you see settings like this 8,14,40,50,60, 75 you start with the first setting and it looks like this
FOREGROUND_APP = 8
VISIBLE_APP = 14
SECONDARY_SERVER = 40
HIDDEN_APP = 50
CONTENT_PROVIDER = 60
EMPTY_APP = 75
You can manipulate these numbers so that they are better managed and give You different aggressiveness and a faster UI
For the Smurfed Out script the settings are as follows
Lite = 8,14,55,70,85,100
Medium = 8,14,75,90,95,125
Max = 25,35,55,70,150,250
Extreme = 25,35,75,90,150,250
Minfrees are set as well but they are equal to the LowMemoryKiller ADJ settings.
I personally run them at Max while using ICS but everyone's experiences will be different.
Click to expand...
Click to collapse
ZRam Explained:
-CALIBAN666- said:
Once a brief statement for those who are not traveling so long in the Android scene:
ZRAM = ramzswap = Compcache
In order to explain more precisely ZRAM first need other terms are more clearly defined:
Swap can be compared with the swap file on Windows. If the memory (RAM) to complete the PC the data that are being used not actively outsource (eg background applications) so as to re-evacuate RAM free. To this data is written to a hard disk. If required, this data is then read back from there easily. Even the fastest SSD is slower than the RAM. On Android, there is no swap!
In ZRAM unnecessary storage resources are compressed and then moved to a reserved area in the fixed RAM (ZRAM). So a kind of swap in memory.
This Ram is more free because the data then only about 1/4 of the former storage requirements have. However, the CPU has to work in more because they compress the data has (or unpack again when they are needed). The advantage clearly lies in the speed. Since the swap partition in RAM is much faster than this is a swap partition on a hard drive.
In itself a great thing. But Android does not have a swap partition, and therefore brings Android ZRAM under no performance gain as would be the case with a normal PC.
In normal PC would look like this:
Swap = swap file (on disk) -> Slow
ZRAM (swap in RAM) -> Faster than swap
RAM -> Quick
With Android, there is no swap partition, and therefore brings ZRAM also no performance boost.
The only thing that brings ZRAM is "more" RAM. Compressed by the "enlarged" so to speak of the available memory. That's on devices with little RAM (<256MB) also pretty useful. The S2 has 1GB but the rich, and more than. There must not be artificially pushed up to 1.5 GB.
After you activate the ZRAM also has 2 disadvantages. The encoding and decoding using CPU time, which in turn has higher power consumption.
Roughly one can say (For devices with more than 512MB RAM):
Without ZRAM: + CPU Performance | + Battery | RAM
With ZRAM: CPU Performance |-Battery | + RAM
For devices with too little RAM so it makes perfect sense. But who shoots the S2 already be fully complete RAM and then still need more?
Check whether you can ZRAM runs in the terminal with
free or cat / proc / meminfo
I hope it helps to understand zRam!!!!
Click to expand...
Click to collapse
Zzmoove Governor Profiles Explained:
GrimPivo said:
* currently available profiles by ZaneZam and Yank555:
* ------------------------------------------------------------------------------------------------------------------------------------------
* - (1)'def' -> Default -> will set governor defaults -
* ------------------------------------------------------------------------------------------------------------------------------------------
* - (2)'ybat -> Yank Battery -> a very good battery/performance balanced setting -
* - DEV-NOTE: highly recommended! -
* ------------------------------------------------------------------------------------------------------------------------------------------
* - (3)'ybatext'-> Yank Battery Extreme -> like yank battery but focus on battery saving -
* ------------------------------------------------------------------------------------------------------------------------------------------
* - (4)'zzbat' -> ZaneZam Battery -> a more 'harsh' setting strictly focused on battery saving -
* - DEV-NOTE: might give some lags! -
* ------------------------------------------------------------------------------------------------------------------------------------------
* - (5)'zzbatp' -> ZaneZam Battery Plus -> NEW! reworked 'faster' battery setting -
* - DEV-NOTE: recommended too! -
* ------------------------------------------------------------------------------------------------------------------------------------------
* - (7)'zzopt' -> ZaneZam Optimized -> balanced setting with no focus in any direction -
* - DEV-NOTE: relict from back in the days, even though some people still like it! -
* ------------------------------------------------------------------------------------------------------------------------------------------
* - (6)'zzmod' -> ZaneZam Moderate -> NEW! setting based on 'zzopt' which has mainly (but not strictly only!) 2 cores online -
* ------------------------------------------------------------------------------------------------------------------------------------------
* - (8)'zzperf' -> ZaneZam Performance -> all you can get from zzmoove in terms of performance but still has the fast -
* - down scaling/hotplugging behaving -
* ------------------------------------------------------------------------------------------------------------------------------------------
* - (9)'zzinz' -> ZaneZam InZane -> NEW! based on performance with new insane scaling active. a new experience! -
* ------------------------------------------------------------------------------------------------------------------------------------------
* - (10)'zzgame' -> ZaneZam Gaming -> NEW! based on performance with scaling block enabled to avoid cpu overheating during gameplay -
* ------------------------------------------------------------------------------------------------------------------------------------------
*
* NOTE: be aware when setting tuneables which have a 'should' in comments below that giving
* them 'wrong' values can lead to odd hotplug behaving!
*
*/
Click to expand...
Click to collapse
A Few Things To Remember:
-When playing around with CPU/GPU profiles, remember to reset the values first before applying another profiles. This sometimes causes the profiles to not be set properly. You can do so by pressing the reset button beside the profile selection drop down box.
-Also, when playing around with the voltage table, remember to also reset the values of the voltage table first. This is causes a lot of voltage tables to not be set properly because when you try to switch from a table to another, the table from the previous profile sticks. Keep in mind also that undervolting too much will cause not only lags but also random reboots. If you want to undervolt, do so step by step, dont just jump straight to -100 and expect the device to still be as stable as before. Keep in mind also that the chips in our S3's are different from one another, as stated in the ASV Level explanation above, so not all voltage tables in shared profiles will be as effective on all other devices.
-When adjusting LMK settings, you have to be aware of how you use your phone i.e. how much multitasking you do, games, music, etc. There is a big difference sometimes also in roms where there are an abundance of memory tweaks in the init.d folder or however the rom developer implements his memory tweaks. That also comes into play with regards to memory management. For example, in CM11, I always have above 300+mb free of RAM when idle, while only having 200+/- mb free when running Sammy based.
-ZRam is not for everybody. There are users who report that ZRam sometimes causes freezes and lag [including me], and has been widely a cause for much discussion. As Lord Boeffla has always said, if you're not a heavy multitasker, dont use it.
-It is not advisable to use a Sammy kernel profile on CM or Omni, and vise versa. There is a reason why Lord Boeffla created spearate threads for his kernels, since there is a ton of difference in the code and configuration implementation between them. As stated by him, "If you are on CM or Omnirom kernel, reset your undervolting for CPU and GPU + reset your LMK settings as they might not apply for your S3 (my profile was taken from Samsung kernel !!!)".
Click to expand...
Click to collapse
The Great Undervolt Debate
Raphy511 said:
Hello,
I am not sure that undervolting can increase battery life. I even think it's the opposite effect
Demonstration :
Increasing battery battery life means using less power.
Power (P) is : P=U(voltage) x I (Intensity)
Most energy used by processors is converted in heating. It is like a resistance.
Voltage for a resistance is U = R x I. (ohm)
So Power used by the processor is P = U * I = R * I * I = R x I^2
So to reduce energy consumption, we have to reduce P. We cannot change R, so we should decrease Intensity.
Power used by processor cannot be change. So if we undervolt, intensity is increasing so the processors heats more and it is the opposite effect.
So why undervolt?
Click to expand...
Click to collapse
Entropy512 said:
P is NOT CONSTANT.
R is semi-constant (semiconductors are weird, so can be nonlinear), gate capacitance C is constant.
If you lower V, you lower I, and thus, you lower P=V*I
That's the whole point of reducing V...
In general, UV is best for, on most devices, 3-5% reduction in CPU core power consumption before you hit stability limits. For general day-to-day use this results in less than a fraction of a percent of total system consumption being saved, but can matter if you're a heavy gamer, giving you more headroom before hitting thermal throttling and consuming less power.
Click to expand...
Click to collapse
AndreiLux said:
I or current does not exist as a constant in transistors. Semiconductor physics are different from normal macro-electronics. The same principles still apply but they are meaningless as their magnitude are lowered to nothingness.
Main power dissipation and power consumption is caused by dynamic leakage on the transistor gate while it is switching. Secondary power consumer is static leakage caused between gate and the body.
The usual simplified formula for CMOS transistors is expressed as
Power = Voltage² x Frequency x Capacitance
or
P = V² x f x C
That's basically it in very simplified terms. And as ewdinpang said, lowering voltage has a squared power decrease in the dynamic leakage power. This has been measured and proven, from myself included.
The full expanded forumula is here:
This is a nonsensical argument, temperature aka heat, is power. If you are getting a less heated phone, then your battery life is improving. If this wouldn't be the case then you are holding the solution to the world's energy problems in your hands.
Click to expand...
Click to collapse

boyheadkick said:
and here's mine:
this is my current profile
https://docs.google.com/file/d/0BzgxLZJk-WiRVll5OUQ0X2c2czA/edit
and this is my gaming profile
https://docs.google.com/file/d/0BzgxLZJk-WiRMElDa0tnRU5uOEU/edit
Click to expand...
Click to collapse
Can't download ,required premission
from my I9300 omega 54 tapatalk

Hi,
I will post mine a bit later, after I released the new kernel series for Samsung, CM and Omnirom.
Andi

zhuoxian said:
Can't download ,required premission
from my I9300 omega 54 tapatalk
Click to expand...
Click to collapse
I'll upload to another site..cant do it right now
Tapatalked from my OmegaDroid i9300

Great thread, it can be very usefull for everybody. I'm using Boeffla 5.1 B13 on a ML2 custom rom and it's awesome. I have 8 hours of screen on two days of use with 3000mAh Samsung battery

Lord Boeffla said:
Hi,
I will post mine a bit later, after I released the new kernel series for Samsung, CM and Omnirom.
Andi
Click to expand...
Click to collapse
Huuuh, salivating news....
Regards
Clark

Ho and thank you for quoting my post and its reply on top
If you want more specific infos on that, find in the Boeffla thread my post (just a few after the one you quoted and the few last one you'll find now) where we talk about the modded PegasusQ battery to use with AFTR-LPA and the things related to zRam and its use!
Sent from my Samsung Galaxy S3 GT-i9300 using TapaTalk2

My current config
Hi all,
so, this is the configuration I am using at the moment:
http://boeffla.df-kunde.de/sgs3/configurations/Andi2.bcprofile
(Right click link to download)
Cheers
Andi

Hi all,
this is my configuration for the best performance , from Italy.
ROM Imperium 4.1.2
http://www67.zippyshare.com/v/48393375/file.html

Lord Boeffla said:
Hi all,
so, this is the configuration I am using at the moment:
http://boeffla.df-kunde.de/sgs3/configurations/Andi2.bcprofile
(Right click link to download)
Cheers
Andi
Click to expand...
Click to collapse
Is now my current profile
Sent from my GT-I9300 using xda app-developers app

boyheadkick said:
and here's mine:
this is my current profile
https://docs.google.com/file/d/0BzgxLZJk-WiRVll5OUQ0X2c2czA/edit
and this is my gaming profile
https://docs.google.com/file/d/0BzgxLZJk-WiRMElDa0tnRU5uOEU/edit
Click to expand...
Click to collapse
I can't download it.
GT-I9300 cihazımdan Tapatalk kullanılarak gönderildi

mehmetgoksu said:
I can't download it.
GT-I9300 cihazımdan Tapatalk kullanılarak gönderildi
Click to expand...
Click to collapse
I havent reuploaded it yet..i will do it later today
Tapatalked from my OmegaDroid i9300

Lord Boeffla said:
Hi all,
so, this is the configuration I am using at the moment:
http://boeffla.df-kunde.de/sgs3/configurations/Andi2.bcprofile
(Right click link to download)
Cheers
Andi
Click to expand...
Click to collapse
how to apply this??
please someone guide me..

MethMargera said:
how to apply this??
please someone guide me..
Click to expand...
Click to collapse
Here you are..
malachow said:
3) activate profile through Boeffla Config V2
How to activate?
open Boeffla Config V2, tap on "DEFAULT" on top, then "load...", choose downloaded profile, activate it in the list (it should be blue) :good:
Click to expand...
Click to collapse

malachow said:
Here you are..
Click to expand...
Click to collapse
thanks and thanks and alot of thanks..u are awesome..

Speed up your i9000 Tips Compilation

Hi everybody!
As i am pretty mad about the slow responsiveness of my i9000, i would like to have everybody to tell the world some tips to help each other in making this phone faster.
My tips:
Use KitKat, Slimrom if possible (SlimKat weekly)
Install mackay kernel, or his bigmem libs.
Use ES Task Manager to remove autorunning apps.
Even like this, i get slowness after a couple of days of use.
What are your tips ? Is it responsive ?
Cheerios!

Ok right now working faster with slimkat latest versión with semaphore Ruth live OC 104% and sd card read ahead at 1024.
Waaay smoother.
I hope it keeps like this a couple of days
Enviado desde mi GameBoy Color

nice to know that :laugh:

Interesting topic :good:
Here's my tips:
ROM: Gamerzrom 4.0, altough I think "Mackay ICS 2014" it's the faster but it lacks some features as quick sms;
Kernel: "Devil4.3_galaxysmtd_20131022" with the following settings: Scheduler: SIO; dynamic fsync: off; governor: ondemand; min freq: 400MHz and max freq: 1000MHz; no OC; deep idle: off; smooth ui: on; sampling rate: 30000; up threshold: 50%; sampling down factor: 4step; eraly demand: off; RAM: 395mb; no zRAM; no swap; no KSM; (most of this settings are the default from gamerzrom)
Other settings: 16bit transparency: on; dithering: color band fix only;
Apps that help: "seeder 2.0" (rng service performance profile: light) and "greenify" (hibernate all apps except launcher and seeder);
Frozed apps with titanium backup: DSPmanager; ES file explorer; videoeditor; terminal emulator; trebuchet;
Launcher: Apex;

Ill try those settings and report back!
Enviado desde mi GameBoy Color

well my phone is lagging as hell too.Maybe ICS is the only solution to our problems?!?
I ve tried many 4.2 ,4.3 and 4.4 roms but after a month of use they all end up lagging even without any extra apps installed.
Can i install ics on top of kitkat or do i need to install gb stock first with odin?

Installing ICS on top of KK will cause bootloop. I think you need to flash GB with Odin (XWJVZ i.e.) then root it with Semaphore or CF-Root kernel. Then finally you can flash any higher Android builds by CWM. I prefer Mackay ICS 1.7. IMO the ROM with best performance. Good luck.
Wysłane z mojego GT-I9000

I don't know what's wrong with either of you people, but my i9000 is on KK 4.4.2 OmniROM Nightlies running alongside Semaphore 3.4.3s with Bigmem enabled (396 MB off and 408 MB on). Everything else is in my signature tab. Also, I've got 42 user apps in my phone (120 odd in total) but still smooth as butter.
Also, in Antutu I score 5400 without OC and 5900 at 110% Live OC.

For Smooth Kitkat on Galaxy i9000. Includes some basics as well.
1. Install Slimkat Weekly
2. Install Minimal Gapps (if required)
3. Remove Unnecessary System Apps with Slimsizer
Browser.apk and Chromebookmarksyncadapter.apk --> replace with lightweight browser eg. Lightning, Puffin or Naked browser
Gmail.apk, Email.apk and Exchange.apk --> Replace with K9Mail (OR keep just Gmail and forward everything from your Exchange Email)
Gallery.apk --> replace with lightweight gallery e.g. Quickpic (Camera still works fine)
Hangouts.apk --> Use normal messaging app
LatinIME.apk and UserDictionaryProvider.apk --> Replace with Swiftkey or Swype
NovaLauncher.apk --> replace with lightweight launcher e.g. Smart Launcher 2 (AND remove all animations from Launcher Settings)
Livewallpaperspicker.apk, phasebeam.apk, phototable.apk, visualizationwallpapers.apk --> Don't need fancy live wallpapers, otherwise get new phone
OTHERS that are safe to delete and you probably don't need (e.g. BasicDreams.apk, CloudPrint2.apk, Dashclock.apk, DSPManager.apk, HTMLViewer.apk, Music.apk, SlimIRC.apk, SoundRecorder.apk)
4. Get rid of animations. Go to Settings --> Developer Options and set 'Window Animation Scale' and 'Transition Animation Scale' to OFF. And set 'Animator Duration Scale' to 0.25x (to prevent the dialer keypad glitch).
5. Install Semaphore Manager from Playstore, then ensure LiveOC is 105%, Ondemand governor, Minimum 105Mhz, Maximum 1050Mhz, NOOP scheduler, and Bigmem is ticked (before reboot you must go to camera and ensure video is on 480p else it will force close on 720p)
6. Install Xposed Installer --> Add Bootmanager (highlight anything that don't have widgets or u don't need notifications from), and Greenify (hibernate anything that don't have widgets and u don't need notifications rom. Also, do not hibernate keyboard)
7. Wifi Advanced Settings --> Untick Scanning Always Available. Also ensure Location is on Battery Saving. Switch OFF Wifi, Bluetooth, and Location when you dont need it.
8. Settings --> Sound --> Untick Vibration on Touch and Touch Sounds (Also do this in your Keyboard Settings)
9. Accounts --> Untick syncing of items you dont need (e.g. Only tick contacts and gmail)
10. Settings --> Advanced Options --> MediaScanner behavior on boot --> Do Not Scan Media
11. Only install/restore apps you use frequently. Other Backup-Uninstall with Titanium Backup and Restore when required.
12. Keep widgets to a minimum
13. Restart your phone daily

Currently put CyanAOSP on an i9000 and it's running great. Overclocking to 1200Mhz seems to cause crashes though.
Switch kernel perhaps?

Currently on CM11 M5 snapshot with Semaphore 3.4.3 kernel, and its buttery smooth so far. M6 snapshot is giving UI crashes
OC Min @ 240 MHz and Max @ 1200 MHz, no crashes. SmartassV2 Governor, Smooth UI on, NOOP Scheduler, bigmems off, Deep Idle off, Touch wake on 30 sec

i ve just formated my phone back to stock 2.3.6 jw7 and root it with cf-root.I just cant believe how much smoother and faster gb is!

You guys should try the OmniROM+Neo Kernel Combination. You'll love it
PFFFFFFFFFFFFFFFFTTT, sent from my i9000

I prefer ICS, too, although it has more bugs than JB or KK...
It is not perfect, but in general useable!

Do not use the phone's features for performance. I think it's entirely relevant to the developer. With the rest of the kernel can handle.
Sorry bad English.

Up! Has anyone still use this phone and with a ROM? So yeah, how is it? Is there any tutorial of it?

[Kernel][3.4.113] Chrono Kernel R5.10

Custom kernel for Samsung Galaxy S Advance
Code:
/*
* Your (probably expired) warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this kernel
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
Features:
Universal kernel for JB, KK, LP and MM-based ROMs
CPU, GPU and DDR OC support
more governors and I/O schedulers
Lite kernel - some kernel features moved as modules
F2FS support
ABB-charger tweaks
many others features and tweaks...
Credits:
@dh.harald and @hafidzduddin for contribution on U8500 platform sources
@ Team Canjica for a base for this kernel
@ Nova Fusion for F2FS implementation
@zwliew for contribution on TC kernel
@cocafe for LiveOPP, GPU OC, abbamp and abb-charger tweaks and many cool patches which I've used from his kernel
@faux123 for dynamic Fsync implementation
@Christopher83 for dynamic management of dirty page writebacks implementation
@KINGbabasula for contribution on TC kernel sources
@boype for SIOPlus tweaks and OndemandPlus governor
@Adi_Pat for abbamp, kernel tweaks
@PolishVodka for initramfs scripts for 4.2.x and 5.0.x
@Rox for help in fixing initramfs scripts for 4.1.2
@ace2nutzer for optimization CPU OC and for whatever scripts which I have used in my kernel
@Meticulus for BLN, Sweep2wake and Doubletap2wake
@mkaluza for huge LiveOPP/Mali improvements and Dynamic governor
@yanpol199 for help with F2FS support in TWRP
@ all users who tests this kernel and directs the development along the right path
@ all those users, who I forgot to mention (PM me if so)
Team Win for TWRP recovery
Samsung for opening kernel source
Linus Torvalds for Linux sources
Special Thanks:
@isaak, @enkflr, @Pdevo, @prometej-zg for donating this phone!
[*]@S.AMU for providing FTP-Server
Source Code:
LK 3.10.y based releases
r5.7.x (LK 3.4.y based releases)
Installation:
Flash temporary kernel (if coming from other recoveries than TWRP 3.1.1)
Reboot recovery
Flash kernel zip
Compatibility:
I only add those ROMs that are confirmed to work by me or someone else:
Stock 4.1.2 ROM
LineageOS 11
CyanogenMod 13
Notice: this kernel is not compatible with NovathorSettings app, be sure to remove it before installing a kernel!
Download:
FTP
XDA:DevDB Information
Chrono Kernel, Kernel for the Samsung Galaxy S Advance I9070
Contributors
ChronoMonochrome, cocafe, faux123, zwliew, mkaluza, Meticulus, KINGbabasula, ace2nutzer, TeamCanjica
Source Code: https://github.com/ChronoMonochrome/Chrono_Kernel-1/commits/master
Kernel Special Features:
Version Information
Status: Stable
Current Stable Version: R5.7.1
Stable Release Date: 1974-11-11
Beta Release Date: 1974-11-11
Created 2018-03-09
Last Updated 2018-04-16

Changelogs and features
Changelog
R5.9.1
Resolved (hopefully) deepsleep issues *
Fixed touchkey not working issue **
* tested in about 24 hours so far with ~6 hours of deep sleep on UltimateROM 6.0.1 without any issues with wakelocks.
** It seems that in r5.9 was introduced a bug - touch keys weren't working (at least, on 6.0.1) after device wake up.
R5.9
Bring up all the latest CK code from Codina kernel
Fix a severe performance issue on r5.8.2 build
BLN is finally FIXED! *
* Apparently, issues with BLN were related to Janice touchkey driver that was putting the device to sleep (when the display is off) regardless of a BLN wakelock usage. Reverting this behavior seemed to enable BLN to work.
R5.8.2
In-kernel vibrator fix for Android 6.0+
R5.8.1
PowerHAL fixes for 4.4.4
Experimental fix for CPU governor issue on 4.4.4
LCDCLK: revert to TeamCanjica kernel implementation
R5.8
Memory management hugely improved (finally LMK works properly)
Fixed powersave interface on JB 4.1.2 stock
Experimental fixes to PowerHAL on 4.4.4
LiveOPP: merged changes from refresh kernel (removed some CPU freq steps)
Dynamic: adjust tunables (same like in refresh kernel)
Possible vibrator fix on 6.0+ (not tested)
(old changelog)
R5.7.1
Initial build for janice (kernel sources based on LineageOS 15.1 kernel for Codina)
Fixed bluetooth issue on 4.1.2
Squash-reverted GPU-related code logic from CPU governor Dynamic
J4FS module code cleanup
Reverted forcing minimum CPU freq to 800 MHz
Enabled CONFIG_CPUSETS (required by Android 6.0.x+ ROMs to function properly)
Kernel Tweaks:
(GPU/CPU undervolting and related tweaks)
Undervolting the CPU/GPU will bring battery savings but possible instability.
1) to undervolt CPU use ChronoKernel app or via init.d scripts:
Code:
echo *cpufreq* varm=xx > /sys/kernel/liveopp/arm_summary
for example, following sets voltage varm=0x10 for 200 MHz:
Code:
echo 200000 varm=0x10 > /sys/kernel/liveopp/arm_summary
or
Code:
echo 200000 varm-=10 > /sys/kernel/liveopp/arm_summary
(default varm voltage for 200 MHz is 0x1a but, code above sets 0x1a - 0xa(10) = 0x10 )
2) to undervolt GPU use init.d script:
Code:
echo x vape=yy > /sys/kernel/mali/mali_dvfs_config
Example:
Code:
echo 2 vape=0x1c > /sys/kernel/mali/mali_dvfs_config
"2" stands for DVFS idx (look at mali_boost_high/mali_boost_low).
To prevent overriding of such settings by ChronoKernel app, add line to your init.d script after GPU undervolting
Code:
chmod 444 /sys/kernel/mali/mali_dvfs_config
Don't change voltage of both GPU/CPU at the same time - otherwise if you'll get reboot if won't know what it caused. The same is for different frequencies - if you'll change voltage of too many steps you won't know which frequency caused reboot. It's not easy process, though, following method simplifies it: https://github.com/mkaluza/i9070_kernel_CoCore-E/wiki/Undervolting-janice .
3) Custom LiveOPP table.
By default some LiveOPP steps such as 100, 200, 500 ... MHz aren't used. You can re-enable those by following way:
Code:
echo 200000 enable=1 > /sys/kernel/liveopp/arm_summary
Or use CK app instead. Don't enable it unless it uses the same voltage as 400 MHz. The same is for the rest frequencies - until some of them uses same voltage, no point to enable steps with lower freq. I've added 100 MHz just to further make some tests with it once again. It can't use lower varm than 200 MHz - that's why it's disabled by default. Furthermore, not all phones well keep undervoltage, that's why 100-400 MHz steps uses same stock voltage varm=0x1a.
UPD. thanks to @borkins for this nice editor LiveOPP ARM steps: http://forum.xda-developers.com/showpost.php?p=60311291&postcount=2921
(CPU freq management tweaks)
CPU freq. limiter for screen OFF, adjust it via:
Code:
SYSFS=/sys/kernel/cpufreq/cpufreq_limits_on_suspend
echo min=100000 > $SYSFS
echo max=400000 > $SYSFS
echo on > $SYSFS
Too low frequency may cause freezes after wakeup and sound scrathes. If you use Dynamic govermor, it make no sense to use cpufreq limiter, because Dynamic already takes care about CPUfreq usage optimization. For more, read wiki.
Input boost
This feature has been originally written by zwliew.
Not all governors support input boost. Supported governors: ondemand, interactive, conservative, ZenX, lionheart and some others. Dynamic governor has its own boost interface.
Default boost frequency is 400 MHz.
Code:
echo 450000 > /sys/kernel/cpufreq/input_boost_freq # echo '0' to disable
echo 35 /sys/kernel/cpufreq/input_boost_ms
(BackLight Notification)
To configure time intervals of BLN blinking type(bln_ondelay stands for time of blink and bln_offdelay - delay between two blinks):
Code:
echo bln_ondelay=500 > /sys/kernel/bln/blink_mode
echo bln_offdelay=6000 > /sys/kernel/bln/blink_mode
Make sure BLN enabled:
Code:
echo 1 > /sys/class/misc/backlightnotification/enabled
# to enable bln_wakelock.
echo on > /sys/kernel/bln/bln_wakelock
Use /sys/devices/virtual/misc/backlightnotification/blink_mode to changes modes.
Blink modes:
0 = no blinking
1 = blink backlight only
2 = blink backlight + rear cam flash
3 = blink rear cam flash only
(Module autoload)
Now there is a simple way to load modules at boot. Just move needed modules to /system/lib/modules/autoload and reboot device(or execute /etc/init.d/00autoload)
(DDR overclock)
This feature has been developed by me and allows you to improve DDR and GPU performance. Please note, that DDR OC might work unstable and cause filesystem corruption. Though, DDR clock of 975 MHz has been highly tested and should work fairly stable on most devices.
Overclocking DDR over 975 MHz is highly NOT recommended, especially in case if you not sure that you can deal with possible consequences.
How to OC DDR:
1) by using
this script .
2) by using Terminal Emulator(in example below 975 MHz):
Code:
echo 0x5017f > /sys/kernel/liveopp/pllddr_oc_on_suspend
This setting will be applied right after disabling screen.
(Minimum APE/DDR OPP on screen on)
This feature has been developed by me and allows to set minimum APE/DDR OPP states which are used when screen is ON. APE controls many systems such as an image, video, audio system etc. DDR OPP determines performance of DDR. Default values are APE50 and DDR50. Lower states(APE25/DDR25) reduces power consumption, but may cause graphical glitches like screen blinking or filling it by vertical grey lines. If you don't have mentioned effects, it's recommended to use APE25/DDR25:
Code:
echo ddropp=25 > /sys/devices/pri_lcd_ws2401.0/mcde_screenon_opp
echo apeopp=25 > /sys/devices/pri_lcd_ws2401.0/mcde_screenon_opp
* if you don't have folder /sys/devices/pri_lcd_ws2401.0, use /sys/devices/pri_lcd_s6d27a1 instead.
(Screen refresh rate)
This feature has been developed by cocafe and modified by me. Lower lcdclk frequency cause less power usage, but too low values makes system unusable.
Following command allows to change screen refresh rate:
Code:
echo x > /sys/kernel/mcde/lcdclk
use
Code:
cat /sys/kernel/mcde/lcdclk
to see supported lcdclk modes. Default mode is 60 Hz which is recommended in most typical cases. If you've screen tearings, blinking etc. change resresh rate mode to "60+ Hz":
Code:
echo 0 > /sys/kernel/mcde/lcdclk
(ABB charger tweaks)
added tweakable interfaces for termination current. To adjust it type(just an example):
Code:
echo 90 > /sys/kernel/abb-chargalg/termination_curr_1st
echo 70 > /sys/kernel/abb-chargalg/termination_curr_2nd
curr_2nd should be less or same as curr_1st. Lower values prolongs battery lifetime, but also slows battery charging.
Default values are curr_1st == curr_2nd == 150 mA. Please note, too low values maybe aren't usable.
(Dynamic FSync)
This feature has been developed by Faux123 and allows to dynamically manage the synchronous writes performed on file system (FSync).
It uses asynchronous writes when the screen is on, instead of synchronous writes, to have better performance and a slightly lower battery drain, while when the screen is off the synchronous writes are re-enabled to flush all the outstanding writes and prevent possible data loss.
How to enable/disable the Dynamic FSync (default enabled):
1) By downloading and using Trickster MOD
2) By directly editing the file /sys/kernel/dyn_fsync/Dyn_fsync_active and setting 1 to enable the dynamic fsync, 0 to disable it (note that set value will be lost after a reboot/shutdown)
3) By using Terminal Emulator (note that set value will be lost after a reboot/shutdown)
- Open Terminal Emulator
- Run this command to disable the dynamic fsync feature
Code:
su
echo 0 > /sys/kernel/dyn_fsync/Dyn_fsync_active
- Or run this command to re-enable the dynamic fsync feature
Code:
su
echo 1 > /sys/kernel/dyn_fsync/Dyn_fsync_active
Click to expand...
Click to collapse
(Software CRCs)
Disabling software CRCs gives you a slight bump(10-30% is what they say) of MMC performance, at the cost of a possibility of your Ace 2 freezing randomly.
Code:
echo 0 > /sys/module/mmc_core/parameters/use_spi_crc
Click to expand...
Click to collapse
(Dynamic dirty page writebacks)
This feature has been developed by Christopher83 and allows to dynamically manage the dirty page writebacks with two different intervals, one when the screen is on and another when the screen is off.
It is based on a commit of Francisco Franco, but instead of using hard coded values and of disabling at all the dirty page writebacks while the screen is on (possibility of data loss).
By using a higher interval we have better performance and less battery consumption, with a very low risk of data loss.
How to customize the dynamic dirty page writebacks feature (default disabled):
Three new procfs parameters are exposed inside /proc/sys/vm path:
- dynamic_dirty_writeback is the activation status of this feature, set 1 to enable it, set 0 to disable it and use the standard behaviour
- dirty_writeback_active_centisecs is the interval for the dirty page writebacks when the system is active (screen on), the default value is 1500 centisecs (15 seconds)
- dirty_writeback_suspend_centisecs is the interval for the dirty page writebacks when the system is suspended (screen off), the default value is 500 centisecs (5 seconds)
1) By directly editing one of the file written above inside /proc/sys/vm and setting the preferred value (note that set value will be lost after a reboot/shutdown)
2) By using Terminal Emulator (note that set value will be lost after a reboot/shutdown)
- Open Terminal Emulator
- Run this command to disable the dynamic dirty page writebacks feature
Code:
echo 0 > /proc/sys/vm/dynamic_dirty_writeback
- Or run this command to re-enable the dynamic dirty page writebacks feature
Code:
echo 1 > /proc/sys/vm/dynamic_dirty_writeback
- Run this command to set customize the two intervals (30 seconds while the screen is on, 10 seconds when the screen is off)
Code:
echo "3000" > /proc/sys/vm/dirty_writeback_active_centisecs
echo "1000" > /proc/sys/vm/dirty_writeback_suspend_centisecs
(Tweak app)
ChronoKernel settings
Thanks mars_army for this app!
Bug reports:
after experiencing a random reboot, type in terminal:
Code:
su
cat /proc/last_kmsg > /storage/sdcard0/last_kmsg.txt
report it in the thread and attach the last_kmsg.txt

Misc
Storages switch
By default, this kernel comes with internal and external storages switched. You can revert this behavior, by changing the line
Code:
use_swap=1
to
Code:
use_swap=0
in file /ramdisk/fstab_specs.txt and flashing the kernel package. This setting will remain until you format /ramdisk partition.

@ChronoMonochrome
I tested "chrono_kernel_r5.7.1-test-40-g169a68f4f29d-janice.zip" on Lineage OS 11.
Result: I have the same hiccups in the youtube video like before.
I think that you can revert the LCDCLK frequency to the default 60 Hz value, because I didn't notice any significant difference.
And I had an isolated crash while I was navigating in settings.
My usual running apps & services are: Should I answer?, Nova Launcher, Tesla Unread, Google Play Services 11.9.75, Ginger Keyboard, Skype 7.46.0.596 (old version from apkmirror), Quickpic, Terminal Emulator, CCleaner, Google Play Store 9.0.15, Tubemate 3.0.11, My Vodafone, Naked Browser, Titanium Backup, Fx File Explorer, Gmail, Google News & Weather, MX Player.
I hope that these logs can help you.

isaak said:
@ChronoMonochrome
I tested "chrono_kernel_r5.7.1-test-40-g169a68f4f29d-janice.zip".
Result: I have the same hiccups in the youtube video like before.
I think that you can revert the LCDCLK frequency to the default 60 Hz value, because I didn't notice any significant difference.
And I had an isolated crash while I was navigating in settings.
My usual running apps & services are: Should I answer?, Nova Launcher, Tesla Unread, Google Play Services 11.9.75, Ginger Keyboard, Skype 7.46.0.596 (old version from apkmirror), Quickpic, Terminal Emulator, CCleaner, Google Play Store 9.0.15, Tubemate 3.0.11, My Vodafone.
I hope that these logs can help you.
Click to expand...
Click to collapse
Thanks for the report! Unfortunately, the last_kmsg log appears to be taken from MaxiCM kernel, so the crash isn't captured here. In the meantime I'll install some of those apps to test how it goes under increased memory pressure. Was /proc/meminfo log taken before or after reboot? It would be useful to check this sysfs interface when the phone is encountering laggs (if it does), but after reboot this info won't help. About lowmemorykiller changes: were apps running faster / slower? So far Youtube playback is the only issue or phone laggs too?

ChronoMonochrome said:
Thanks for the report! Unfortunately, the last_kmsg log appears to be taken from MaxiCM kernel, so the crash isn't captured here. In the meantime I'll install some of those apps to test how it goes under increased memory pressure. Was /proc/meminfo log taken before or after reboot? It would be useful to check this sysfs interface when the phone is encountering laggs (if it does), but after reboot this info won't help. About lowmemorykiller changes: were apps running faster / slower? So far Youtube playback is the only issue or phone laggs too?
Click to expand...
Click to collapse
/proc/meminfo log was taken before the reboot. Youtube playback is not the only issue. I can just say that the best way to reproduce a crash or a slowdown is switching from an app to another as quick as possible and/or try a cleaning with CCleaner. Ah, in that list I forgot some apps, so I've updated my previous post.

So far I've tested as much as possible on stock 4.1.2 rom and everything is working fine.
-Bluetooth is definitely fixed, working like a charm.
-CRC, FSYNC and other tweaks give me no issue at all and work good.
-Tested a bit of undervolting, firstly cpu, then gpu, and DDR OC, and here too, no problems.
-Really great the supension min and max cpufreq, tested it with some init.d scripts.
Overall stability and responsiveness of the system is impressive, really positive, you really made a big surprise
These instead are the few things I noticed not working, I think the first two are really not a major problem at all and maybe I am messing with something:
1. I have noticed that trying to set governor by init.d script doesn't seem to take effect and at boot completed I find performance setted as governor:
busybox echo dynamic > /sys/devices/system/cpu/cpu0/cpufreq/scaling_governor;
Click to expand...
Click to collapse
Running then the script manually set dynamic as governor correctly.
(SOLVED WITH A BUSYBOX CHMOD COMMAND BEFORE EVERY PARAMETER SET)
2. I tryed using exfat support, loaded fuse.ko and exfat.ko modules on boot, then used the same binary from cocafe twrp kernel I was using fine (and here I think there is the issue) with this command:
exfat-fuse /dev/block/mmcblk1p1 /storage/extSdCard;
Click to expand...
Click to collapse
Sdcard isn't recognized and android is asking to format it as usual.
3. I guess should be the number one: Recovery doesn't seem to work, tryed many times, also removing battery first, but I can't enter in recovery. Next time I flash kernel I will do it manually from terminal, or Universal Kernel Flash app
EDIT1:
I found that the path where lcd parameters are located would be:
/sys/kernel/s6e63m0/panel/lcd_clk
Click to expand...
Click to collapse
instead of:
/sys/kernel/mcde/lcdclk
Click to expand...
Click to collapse
EDIT2:
Seems like deepsleep is broken, because in my situation phone doesn't enter in deepsleep mode and having a look at /d/supsend_stats and d/suspend directory confirm my issue.
I found at first strange the absence of /d/cpuidle directory and so the deepest_state configuration file, like something is missing here.
EDIT3:
I think I found another last issue, BLN is not working, but I think could be again something to do with files and folder structure, for example I can't find:
/sys/class/misc/backlightnotification/enabled
Click to expand...
Click to collapse
Again, this is still something not so important tough
EDIT4:
I was experiencing before issues with phone calls, making phone app freezing and signal loss, going to "no service" mode. Had to flash backup kernel for now, tomorrow as I get some time again I will provide logs

Pdevo said:
So far I've tested as much as possible on stock 4.1.2 rom and everything is working fine.
-Bluetooth is definitely fixed, working like a charm.
-CRC, FSYNC and other tweaks give me no issue at all and work good.
-Tested a bit of undervolting, firstly cpu, then gpu, and DDR OC, and here too, no problems.
-Really great the supension min and max cpufreq, tested it with some init.d scripts.
Overall stability and responsiveness of the system is impressive, really positive, you really made a big surprise
Click to expand...
Click to collapse
Thanks for a review!
2. I tryed using exfat support, loaded fuse.ko and exfat.ko modules on boot, then used the same binary from cocafe twrp kernel I was using fine (and here I think there is the issue) with this command:
Sdcard isn't recognized and android is asking to format it as usual.
Click to expand...
Click to collapse
Honestly I didn't test exfat for a long time. These issues might come due to the filesystem driver updates. Anyway I need to test things myself before I'll have clues on how to fix it.
3. I guess should be the number one: Recovery doesn't seem to work, tryed many times, also removing battery first, but I can't enter in recovery. Next time I flash kernel I will do it manually from terminal, or Universal Kernel Flash app
Click to expand...
Click to collapse
Are you sure you have followed the installation guide to flash the kernel? Especially, using TWRP is required to flash a kernel (other recoveries aren't tested and can be a cause for a bugs) I was returning to a stock for a short time to test if bluetooth works and recovery was working for me when I was returning to UltimateROM 6.0.1 afterwards.
Don't use manual flashing or UKF app to flash the kernel! The installation method is quite complicated (compared to installation of other kernels), so a full and proper installation is only possible if you flash it from recovery.
EDIT1:
I found that the path where lcd parameters are located would be:
instead of:
Click to expand...
Click to collapse
I have moved the interface to match the implementation of LCDCLK management on codina.
EDIT2:
Seems like deepsleep is broken, because in my situation phone doesn't enter in deepsleep mode and having a look at /d/supsend_stats and d/suspend directory confirm my issue.
I found at first strange the absence of /d/cpuidle directory and so the deepest_state configuration file, like something is missing here.
Click to expand...
Click to collapse
This is entirely possible due to deepsleep driver changes in a kernel. I never tested if it works on stock, I guess I'll have to return to stock once again.
EDIT3:
I think I found another last issue, BLN is not working, but I think could be again something to do with files and folder structure, for example I can't find:
Again, this is still something not so important tough
Click to expand...
Click to collapse
I was thinking BLN isn't working on this phone at all, so I disabled the kernel support. Is the stock ROM only where BLN works?

Yes sir, I flashed your kernel exactly from twrp, coming from cocore refresh24, I referred to UKF or terminal emulator to say I would use that method now that I can't enter recovery mode, but I never use these ways at all, always from recovery, because I know that kernel come with scripts and other files that without recovery wouldn't be installed
Tomorrow I will do further testing

ChronoMonochrome said:
I was thinking BLN isn't working on this phone at all, so I disabled the kernel support. Is the stock ROM only where BLN works?
Click to expand...
Click to collapse
As far as I know no dev on Janice introduced BLN, but I don't see any reason why it shouldn't be technically possible if it works on Ace II.
Please don't give up on this unless you're sure at 100%.
@cocafe had it on his todo list, but at the end he didn't implement it for unknown reasons. I asked to him but he never explained it.

ChronoMonochrome said:
I was thinking BLN isn't working on this phone at all, so I disabled the kernel support. Is the stock ROM only where BLN works?
Click to expand...
Click to collapse
Until now, BLN never been working or supported on custom and stock roms, as said by @isaak, the reason behing that I think is properly known by developers such as cocafe.
Yesterday I made a little try using the commands you point in the thread, a little go, but in fact is not working. Would be a cool feature, but nothing so important at all for me, at least for now
UPDATE:
I flashed again the kernel, starting from freshly downloaded zip, and I got an infinite bootloop trying to get to recovery, the only way to go back working was flashing stock rom with odin.
I can now safely say there is an issue with recovery using the stock rom.
UPDATE 19:30
I took two logs, one for incoming call and one for outgoing call, reproducing the issue I was referring in previous post.
In the first case, incoming call, notification appear but scrolling to accept call make phone unusable and I could just shutdown it to solve the situation.
In the second case, outgoing call, after I start the call the phone app isn't responding, I see the notification widget but tapping on every possible button, to terminate call or enter in dialog, doesn't work and phone is very unstable until a sort of a timeout is running out and call stop itself.

Hi @ everyone!
Because of th numerous issues found with the current release, I'm starting to work on a fresh kernel sources (3.0.101), almost from scratch. My primary focus for now will be a multitasking, that is the main issue with the current release. Because of yet unknown root cause of the issue it could take a while to reveal it, but I hope to release a new build these days (and after playing with some kernel configuration find out more appropriate one for a multitasking). Stay tuned!

For sure we stay tuned!, thank you so much for the efforts and take all the time you need Chrono

isaak said:
My usual running apps & services are: Should I answer?, Nova Launcher, Tesla Unread, Google Play Services 11.9.75, Ginger Keyboard, Skype 7.46.0.596 (old version from apkmirror), Quickpic, Terminal Emulator, CCleaner, Google Play Store 9.0.15, Tubemate 3.0.11, My Vodafone, Naked Browser, Titanium Backup, Fx File Explorer, Gmail, Google News & Weather, MX Player.
I hope that these logs can help you.
Click to expand...
Click to collapse
I have set up all these apps about 10-12 days ago. I should say, removing CCleaner seemed to help a lot to increase the phone performance. It's doing a lot of background CPU and I/O work, making the phone almost unusable on r5.7.1 and severely affects performance on r4.1 / r4.6.

ChronoMonochrome said:
I have set up all these apps about 10-12 days ago. I should say, removing CCleaner seemed to help a lot to increase the phone performance. It's doing a lot of background CPU and I/O work, making the phone almost unusable on r5.7.1 and severely affects performance on r4.1 / r4.6.
Click to expand...
Click to collapse
The new CCleaner version is on the heavy side, so I had to freeze some background services with My Android Tools app. Anyway I've just uninstalled it definitively.

New build r5.8 is up!
R5.8
Memory management hugely improved (finally LMK works properly)
Fixed powersave interface on JB 4.1.2 stock
Experimental fixes to PowerHAL on 4.4.4
LiveOPP: merged changes from refresh kernel (removed some CPU freq steps)
Dynamic: adjust tunables (same like in refresh kernel)
Possible vibrator fix on 6.0+ (not tested)

ChronoMonochrome said:
R5.8
Memory management hugely improved (finally LMK works properly)
Fixed powersave interface on JB 4.1.2 stock
Experimental fixes to PowerHAL on 4.4.4
LiveOPP: merged changes from refresh kernel (removed some CPU freq steps)
Dynamic: adjust tunables (same like in refresh kernel)
Possible vibrator fix on 6.0+ (not tested)
Click to expand...
Click to collapse
I tried 5.8.5 and I have still issues with LineageOS 11:
1) I've got a screen flicker issue while I was browsing in Naked Browser with the new LCDCLK frequency.
Tried to set echo 1 > /sys/kernel/mcde/lcdclk, but I've noticed that this value is not kept after a reboot.
Very annoying, because I can't restore 60 Hz permanently.
2) There are still issues about some values not kept in the performance UI of Lineage Os.
For example:
- Try to set Zenx as governor, min. 200 max 1000, Noops scheduler. Reboot. Scheduler will be resetted to Deadline.
- There is still a bug with max clock value of Dynamic governor (I can reproduce it with ZenX governor too). I set it to 800 MHz, I go back to the settings screen, then I return to the Performance -> Processor section to check if the 800 MHz value is maintained. But the UI automatically restored the max clock to 1000 MHz without my consent.
For your information, these issues occur only randomly and with particular combinations. So, if you can't reproduce them, the best way is to set these, one at a time:
1) Zenx as governor, min. 200 max 800, Noops scheduler. Reboot.
2) Zenx as governor, min. 200 max 800, Fiops scheduler. Reboot.
2) Zenx as governor, min. 200 max 800, Sioplus scheduler. Reboot.
After the first, the second or the third reboot, some of these values you've set will change spontaneously on their own.
"Set on boot" options are correctly set for both Processor and I/O Scheduler.
And I keep "Enable per-app profiles" option turned off.
3) On the Performance UI, performance profile results automatically set on Balanced after any reboot. But if you cannot fix it, I can live with that, don't worry. It doesn't keep "Power save" or "Performance" profile between reboots.
PS: I would appreciate if you could update the installation steps in this thread with the same steps of the refresh topic:
Flash temporary kernel (if coming from other recoveries than TWRP 3.1.1)
Reboot recovery
Flash kernel zip

isaak said:
I tried 5.8.5 and I have still issues with LineageOS 11:
1) I've got a screen flicker issue while I was browsing in Naked Browser with the new LCDCLK frequency.
Tried to set echo 1 > /sys/kernel/mcde/lcdclk, but I've noticed that this value is not kept after a reboot.
Very annoying, because I can't restore 60 Hz permanently.
Click to expand...
Click to collapse
Sorry, I thought I've reverted this change. Can you confirm that setting old LCDCLK freq fixes issue? As a temporary solution you can use init.d script to set the appropriate LCDCLK freq index.
2) There are still issues about some values not kept in the performance UI of Lineage Os.
For example:
- Try to set Zenx as governor, min. 200 max 1000, Noops scheduler. Reboot. Scheduler will be resetted to Deadline
Click to expand...
Click to collapse
Can confirm now. I have a guess for that, for now the solution as follows:
remove /ramdisk/modules/autoload/sioplus-iosched.ko, reboot. I have to test this a bit more time to be sure 100%, but so far I couldn't reproduce an issue after removing this module (no other CPUfreq governor or I/O scheduler must be loaded as well).
- There is still a bug with max clock value of Dynamic governor (I can reproduce it with ZenX governor too). I set it to 800 MHz, I go back to the settings screen, then I return to the Performance -> Processor section to check if the 800 MHz value is maintained. But the UI automatically restored the max clock to 1000 MHz without my consent.
Click to expand...
Click to collapse
It's not a bug, but rather intended behavior - due to PowerHAL changes implemented, CPUfreq can only be changed via script (see /ramdisk/perf.sh). I've previously asked if anyone would prefer to adjust CPUfreq usual way, In this case I can just remove the corresponding lines from the PowerHal script. This will make PowerHAL settings a bit more useless, but will gave easier control over CPUfreq.
3) On the Performance UI, performance profile results automatically set on Balanced after any reboot. But if you cannot fix it, I can live with that, don't worry. It doesn't keep "Power save" or "Performance" profile between reboots.
Click to expand...
Click to collapse
The script actually works, though you're right, it works buggy and everytime shows the default profile (you can set, e.g. Powersave profile and check min/max CPU freq, to check if it actually works).
PS: I would appreciate if you could update the installation steps in this thread with the same steps of the refresh topic:
Flash temporary kernel (if coming from other recoveries than TWRP 3.1.1)
Reboot recovery
Flash kernel zip
Click to expand...
Click to collapse
Done!

isaak said:
I've got a screen flicker issue while I was browsing in Naked Browser with the new LCDCLK frequency.
Tried to set echo 1 > /sys/kernel/mcde/lcdclk, but I've noticed that this value is not kept after a reboot.
Very annoying, because I can't restore 60 Hz permanently.
ChronoMonochrome said:
Sorry, I thought I've reverted this change. Can you confirm that setting old LCDCLK freq fixes issue? As a temporary solution you can use init.d script to set the appropriate LCDCLK freq index.
Click to expand...
Click to collapse
Click to expand...
Click to collapse
Yes, I can confirm that setting old LCDCLK freq fixed the flicker issue for my screen. I think it would be better to set it as default in the next release.
isaak said:
There are still issues about some values not kept in the performance UI of Lineage Os.
For example:
- Try to set Zenx as governor, min. 200 max 1000, Noops scheduler. Reboot. Scheduler will be resetted to Deadline
etc etc....
ChronoMonochrome said:
Can confirm now. I have a guess for that, for now the solution as follows:
remove /ramdisk/modules/autoload/sioplus-iosched.ko, reboot. I have to test this a bit more time to be sure 100%, but so far I couldn't reproduce an issue after removing this module (no other CPUfreq governor or I/O scheduler must be loaded as well).
Click to expand...
Click to collapse
Click to expand...
Click to collapse
I tried your steps, unfortunately they didn't work for me.
ChronoMonochrome said:
It's not a bug, but rather intended behavior - due to PowerHAL changes implemented, CPUfreq can only be changed via script (see /ramdisk/perf.sh). I've previously asked if anyone would prefer to adjust CPUfreq usual way, In this case I can just remove the corresponding lines from the PowerHal script. This will make PowerHAL settings a bit more useless, but will gave easier control over CPUfreq.
Click to expand...
Click to collapse
Personally I would prefer more control over CPUfreq. Could you list the main advantages to limit CPUfreq changes only via script? Is it a sort of auto-optimization? This point is not clear to me. If you think that any change to this mechanism would affect negatively the battery life, then don't change anything.
isaak said:
On the Performance UI, performance profile results automatically set on Balanced after any reboot. But if you cannot fix it, I can live with that, don't worry. It doesn't keep "Power save" or "Performance" profile between reboots.
ChronoMonochrome said:
The script actually works, though you're right, it works buggy and everytime shows the default profile (you can set, e.g. Powersave profile and check min/max CPU freq, to check if it actually works).
Click to expand...
Click to collapse
Click to expand...
Click to collapse
I tried Powersave and Performance profiles, in both cases the maximum freq varies between 400 MHz and 1000 MHz, rarely reaching 800 MHz. Minimum freq is always 200 MHz and it doesn't change visually like the maximum freq. Balanced profile is always shown visually after a reboot.

isaak said:
Personally I would prefer more control over CPUfreq. Could you list the main advantages to limit CPUfreq changes only via script? Is it a sort of auto-optimization? This point is not clear to me. If you think that any change to this mechanism would affect negatively the battery life, then don't change anything.
Click to expand...
Click to collapse
Because of some CPUfreq scaling tunables were changed (in the case of Dynamic governor), it makes sense to implement a PowerHAL profiles, which would limit / restore the max CPUfreq. But I think I've found a solution - I will make it possible to change CPUfreq for a Balanced profile.
I tried Powersave and Performance profiles, in both cases the maximum freq varies between 400 MHz and 1000 MHz, rarely reaching 800 MHz. Minimum freq is always 200 MHz and it doesn't change visually like the maximum freq. Balanced profile is always shown visually after a reboot.
Click to expand...
Click to collapse
Ok, I found some logical errors in the script, should be fixed in upcoming release.

[Kernel][3.0.101] Chrono Kernel Refresh R4.6.2

Custom kernel for Samsung Galaxy S Advance
Code:
/*
* Your (probably expired) warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this kernel
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
​Hi there!
Because of numerous issues found in 3.4.113 kernel, I'm temporarily moving to development on 3.0.101 base.
What is difference between chrono kernel (CK) and CK refresh build? CK was mostly tested on MM-based ROMs, but appeared not to work stably on Android 4.4.x. Aim of this build is to properly enable support for older ROMs (like kitkat), and when done, merge these changes to 3.4.113 kernel.
This build is based upon chrono kernel r4.1 build, so to avoid versions confusion, I'm creating a separate topic.
Features:
CPU, GPU and DDR OC support
more governors and I/O schedulers
Lite kernel - some kernel features moved as modules
F2FS support
ABB-charger tweaks
many others features and tweaks...
Credits:
@dh.harald and @hafidzduddin for contribution on U8500 platform sources
@ Team Canjica for a base for this kernel
@ Nova Fusion for F2FS implementation
@zwliew for contribution on TC kernel
@cocafe for LiveOPP, GPU OC, abbamp and abb-charger tweaks and many cool patches which I've used from his kernel
@faux123 for dynamic Fsync implementation
@Christopher83 for dynamic management of dirty page writebacks implementation
@KINGbabasula for contribution on TC kernel sources
@boype for SIOPlus tweaks and OndemandPlus governor
@Adi_Pat for abbamp, kernel tweaks
@PolishVodka for initramfs scripts for 4.2.x and 5.0.x
@Rox for help in fixing initramfs scripts for 4.1.2
@ace2nutzer for optimization CPU OC and for whatever scripts which I have used in my kernel
@Meticulus for BLN, Sweep2wake and Doubletap2wake
@mkaluza for huge LiveOPP/Mali improvements and Dynamic governor
@yanpol199 for help with F2FS support in TWRP
@ all users who tests this kernel and directs the development along the right path
@ all those users, who I forgot to mention (PM me if so)
Team Win for TWRP recovery
Samsung for opening kernel source
Linus Torvalds for Linux sources
Special Thanks:
@isaak, @enkflr, @Pdevo, @prometej-zg for donating this phone!
[*]@S.AMU for providing FTP-Server
Source Code:
LK 3.0.y based releases
Installation:
Flash temporary kernel (if coming from other recoveries than TWRP 3.1.1)
Reboot recovery
Flash kernel zip
Notice: this kernel is not compatible with NovathorSettings app, be sure to remove it before installing a kernel!
Download:
FTP
XDA:DevDB Information
Chrono Kernel Refresh, Kernel for the Samsung Galaxy S Advance I9070
Contributors
ChronoMonochrome, cocafe, faux123, zwliew, mkaluza, Meticulus, KINGbabasula, ace2nutzer, TeamCanjica
Source Code: https://github.com/ChronoMonochrome/Chrono_Kernel-1/commits/refresh-3.0.101
Kernel Special Features:
Version Information
Status: Testing
Stable Release Date: 1974-11-11
Beta Release Date: 1974-11-11
Created 2018-03-22
Last Updated 2018-03-23

Changelogs
Changelog
R4.6.2
rebased to CM14.1 branch (added support for 6.0.1 and 7.1.2 ROMs)
R4.6.1
fixed CPU OC instabilities
LCDCLK is adjusted to fix tearing issues *
adjusted Dynamic CPU governor tunables for a better battery live
adjusted PowerHAL profiles **
genfstab: storages swap is disabled by default (remove /ramdisk/fstab_specs.txt before flashing to take this change in an effect)
updated temporary kernel zip
* tested with apps like Impossible Game, a display tearings are mostly resolved here. Apps like Youtube, though, might still causing tearings when playing video.
** the minimum CPU freq is set to 400 MHz. I've decided to use it as a default since 200 and 400 MHz CPUfreq steps are anyway using the same voltage, so unless you're undervolting the CPU, there won't be any significant difference in a battery drain.
R4.6
updated to r4.6 LowMemoryKiller implementation - best so far!
Disabled HighMem
removed some CPUfreq steps *
Dynamic governor: parameters are tuned for the better performance (credits: @ace2nutzer)
Added performance profiles (the corresponding parameters can be found in /ramdisk/perf.profiles.rc)
Other updates from r4.6 (various updates from LK 3.4, tweaks etc)
* Avalable CPU frequency steps are: 200, 800, 1000, 1100, 1200, 1215 Mhz. I've decided just to give it a try - this is a necessary part of tuning the CPU governor. If anyone doesn't like that frequencies between 200 and 800 MHz were removed I can add them back, but until performance-related issues are not resolved I'd suggest just leave as it is.
R4.1
Initial build for janice (kernel sources based on Chrono Kernel r4.1)
LiveOPP: updated to r5.7.1 kernel version
Exfat: test fixes for Stock 4.1.2 ROM (not tested)
Enabled CONFIG_STE_TRACE_MODEM (test fix for Stock ROM incoming / outgoing calls)
Kexec: added janice support

Misc
Storages switch
By default, this kernel comes with internal and external storages switched. You can revert this behavior, by changing the line
Code:
use_swap=1
to
Code:
use_swap=0
in file /ramdisk/fstab_specs.txt and flashing the kernel package. This setting will remain until you format /ramdisk partition.

Thank you Chrono again.
So far I am still having issues with calls on 4.1.2 stock, I took another logcat in case would help you, and seems like phone can't enter deepsleep mode, but I will investigate further this issue with some days of usage.
I couldn't get exfat working, I took the exfat-fuse binary from /sbin in TWRP, then ran "exfat-fuse /dev/block/mmcblk1p1 /storage/extSdCard", tryed also with "mount.exfat-fuse etc etc", the fact is the card is correctly mounted and usable from recovery, but this does not matter after all.
The nice thing is I find multitasking working far better, phone seems to be more responsive in situations where more apps are running at the same time, this is very good to me!.
Another big point is installation went fine and recovery is working perfectly, so problems with possible bootloops are solved (and after some more usage I will go further to your more updated roms )
If there is something more to provide you, test or informations missing, please ask me Chrono

I tested chrono kernel r4.1 on Lineage OS 11.
-Compared to the previous chrono_kernel_r5.7.1, this is considerably slow, especially during the opening of apps like Settings, Contacts, Google News, Play store.
-If I set 1000 Mhz as maximum clock of the dynamic governor, the phone becomes slower and a bit hot on the back.
Multitasking is severely affected by that clock. Multitasking is more stable at 800 Mhz, despite it's still slow.
-If I reboot the phone, the maximum clock of 1000 Mhz is automatically resetted at 800 Mhz.
-If I attempt to reboot the phone in recovery mode from Lineage Os 11 ROM with the PC USB charging cable on, phone will shutdown instead. Disconnecting the charging cable before rebooting the phone in recovery mode is the only workaround. It doesn't happen with the Epirex Kernel, so I think it's related to your kernel.
In my attachment there is a meminfo that I took while the phone was under load.
If it isn't enough, I attached a full logcat. There are some errors and crashes.

@Pdevo, @isaak, thanks for testing!
I tested chrono kernel r4.1 on Lineage OS 11.
-Compared to the previous chrono_kernel_r5.7.1, this is considerably slow, especially during the opening of apps like Settings, Contacts, Google News, Play store.
Click to expand...
Click to collapse
Probably I've rushed things, or sort of. I had a hard time trying to find a considerably stable kernel 3.0.101 base (this one appeared to work stably, though not best, in terms of the performance). Nevertheless, the multitasking should already be better (at least better than in r5.7.1, as in this one LowMemoryKiller appeared not to work at all). I'm updating the sources to a new kernel base, r4.6 which should be even better in multitasking term.
-If I reboot the phone, the maximum clock of 1000 Mhz is automatically resetted at 800 Mhz.
Click to expand...
Click to collapse
Should be fixed in upcoming release.
-If I attempt to reboot the phone in recovery mode from Lineage Os 11 ROM with the PC USB charging cable on, phone will shutdown instead. Disconnecting the charging cable before rebooting the phone in recovery mode is the only workaround. It doesn't happen with the Epirex Kernel, so I think it's related to your kernel.
Click to expand...
Click to collapse
It's a bug in CM11 ramdisk, I've took another one from Codina, and now this issue should be resolved as well.
Pdevo said:
So far I am still having issues with calls on 4.1.2 stock, I took another logcat in case would help you, and seems like phone can't enter deepsleep mode, but I will investigate further this issue with some days of usage.
I couldn't get exfat working, I took the exfat-fuse binary from /sbin in TWRP, then ran "exfat-fuse /dev/block/mmcblk1p1 /storage/extSdCard", tryed also with "mount.exfat-fuse etc etc", the fact is the card is correctly mounted and usable from recovery, but this does not matter after all.
Click to expand...
Click to collapse
I'm afraid that exfat driver built in the kernel is not compatible with this userspace mount.exfat-fuse utility. I won't be able to fix it, until I find a time to return to stock & rebuild either mount.exfat-fuse or kernel driver in order to make them compatible each with other.
As for the deepsleep issue, I can say that at least 4.4.4 is not affected by this bug. Try making sure that no apps are preventing deep sleep (Better battery stats or Wakelock detector can help in that).

New build r4.6 is up!
Changelog
updated to r4.6 LowMemoryKiller implementation - best so far!
Disabled HighMem
removed some CPUfreq steps *
Dynamic governor: parameters are tuned for the better performance (credits: @ace2nutzer)
Added performance profiles (the corresponding parameters can be found in /ramdisk/perf.profiles.rc)
Other updates from r4.6 (various updates from LK 3.4, tweaks etc)
* Avalable CPU frequency steps are: 200, 800, 1000, 1100, 1200, 1215 Mhz. I've decided just to give it a try - this is a necessary part of tuning the CPU governor. If anyone doesn't like that frequencies between 200 and 800 MHz were removed I can add them back, but until performance-related issues are not resolved I'd suggest just leave as it is.

ChronoMonochrome said:
Changelog
updated to r4.6 LowMemoryKiller implementation - best so far!
Disabled HighMem
removed some CPUfreq steps *
Dynamic governor: parameters are tuned for the better performance (credits: @ace2nutzer)
Added performance profiles (the corresponding parameters can be found in /ramdisk/perf.profiles.rc)
Other updates from r4.6 (various updates from LK 3.4, tweaks etc)
* Avalable CPU frequency steps are: 200, 800, 1000, 1100, 1200, 1215 Mhz. I've decided just to give it a try - this is a necessary part of tuning the CPU governor. If anyone doesn't like that frequencies between 200 and 800 MHz were removed I can add them back, but until performance-related issues are not resolved I'd suggest just leave as it is.
Click to expand...
Click to collapse
Tested on Lineage Os 11 without CCleaner.
After flashing this new kernel I had to force a Media scan with Fx File Explorer (that detected over 300 changed files) because the phone was really slow. That was sufficient to speed up the multitasking that now it's much better than previous 4.1 build.
Additional observations:
- Do you think it's possible to improve Media scanner reactivity via kernel?
- Fx File Explorer detects my external sd card as Main storage and Media card as internal storage. This doesn't happen on Epirex kernel.
- Battery usage is higher than previous kernel. If I stay on a webpage in idle, after 30 seconds my battery decreases of one percentage point (i.e. from 70% to 69%). I noticed that a simple swipe on the screen jumps the current clock directly to the maximum frequency, this could be one of the reasons.
- There is only FIOPS as I/O Scheduler and I miss all the other schedulers.
I think you're on the right track!

isaak said:
- Do you think it's possible to improve Media scanner reactivity via kernel?
Click to expand...
Click to collapse
I don't think it's possible. The only possible way is to overclock CPU, though it won't help much.
- Fx File Explorer detects my external sd card as Main storage and Media card as internal storage. This doesn't happen on Epirex kernel.
Click to expand...
Click to collapse
This is a default behaviour in Chrono Kernel. Because on codina we have only 4 Gb of available space, it makes sense just to remove internal storage partition and use the external one as primary. If anyone wants, I can revert this behavior. It's possible to switch storages back by editing file /ramdisk/fstab_specs.txt (set use_swap value to 0) and flashing a kernel package.
- Battery usage is higher than previous kernel. If I stay on a webpage in idle, after 30 seconds my battery decreases of one percentage point (i.e. from 70% to 69%). I noticed that a simple swipe on the screen jumps the current clock directly to the maximum frequency, this could be one of the reasons.
Click to expand...
Click to collapse
Ok, I'll consider of tuning CPU governor in order to provide more battery friendly setup. I was afraid that the battery usage might be too high, but that was a necessary evil, I guess. In the meantime, as a temporary workaround, the maximum CPU frequency can even be lowered to 800 MHz, it should be still fast enough.
- There is only FIOPS as I/O Scheduler and I miss all the other schedulers.
I think you're on the right track!
Click to expand...
Click to collapse
To load more I/O schedulers, you can copy (or symlink) a module file to /system/lib/modules/autoload, then reboot the phone. This doesn't seem to work, a script that loads modules, is broken.
Because usually I don't change I/O scheduler, by default, no more I/O scheds are loaded. Do you have any preferred I/O scheds?

ChronoMonochrome said:
I don't think it's possible. The only possible way is to overclock CPU, though it won't help much.
Click to expand...
Click to collapse
Nevermind.
ChronoMonochrome said:
This is a default behaviour in Chrono Kernel. Because on codina we have only 4 Gb of available space, it makes sense just to remove internal storage partition and use the external one as primary. If anyone wants, I can revert this behavior. It's possible to switch storages back by editing file /ramdisk/fstab_specs.txt (set use_swap value to 0) and flashing a kernel package.
Click to expand...
Click to collapse
I'd like to revert the behavior, so I would appreciate If you could provide the same instructions here and in the other kernel thread..
ChronoMonochrome said:
To load more I/O schedulers, you can copy (or symlink) a module file to /system/lib/modules/autoload, then reboot the phone. This doesn't seem to work, a script that loads modules, is broken.
Because usually I don't change I/O scheduler, by default, no more I/O scheds are loaded. Do you have any preferred I/O scheds?
Click to expand...
Click to collapse
I would suggest deadline, noop, sioplus, zen (plus the existent FIOPS).

ChronoMonochrome said:
This is a default behaviour in Chrono Kernel. Because on codina we have only 4 Gb of available space, it makes sense just to remove internal storage partition and use the external one as primary. If anyone wants, I can revert this behavior. It's possible to switch storages back by editing file /ramdisk/fstab_specs.txt (set use_swap value to 0) and flashing a kernel package.
To load more I/O schedulers, you can copy (or symlink) a module file to /system/lib/modules/autoload, then reboot the phone. This doesn't seem to work, a script that loads modules, is broken.
Because usually I don't change I/O scheduler, by default, no more I/O scheds are loaded. Do you have any preferred I/O scheds?
Click to expand...
Click to collapse
Personally I really appreciate and find useful the external sdcard storage as primary one, should be the default behaviour for me, it makes sense and also I never liked to have some files on one unit and some files on another one (download, pictures, recordings on extsdcard, apps folders, screens, other apps downloads etc on internal), I really like the idea of sdcard as main, like the old times of galaxy mini
Fiops to me is a fair good scheduler, maybe also noop would be useful, but I guess having as much things as modules as possible can help load only the strictly necessary, but I say this without dev knowledge.
I will test this build and especially the deepsleep issues, to see if there are apps causing phone not to sleep, the problem is I didn't add any app, just using the same enviroment that with cocore was going to deepsleep. I will report soon, anyway, good job chrono, keep it up

Pdevo said:
Fiops to me is a fair good scheduler, maybe also noop would be useful, but I guess having as much things as modules as possible can help load only the strictly necessary, but I say this without dev knowledge.
Click to expand...
Click to collapse
Yes, FIOPS is good. I just think that having 2 or 3 additional schedulers to select would be better for different uses.
In my previous post I replaced sioplus with zen, according to the conclusions of this guide. There is an useful (up to date) list of recommended IO schedulers, ordered for everyday usage, battery life, heavy multitasking, etc.

New build r4.6.1 is up!
Hey guys and sorry for having to wait that long for a new releases!
I'm still working on 3.4.x kernel - no great news here, but at least I've found a more less stable sources base, so the only what needed now, is a time to bring up some stability fixes and feature changes.
For now releasing a 3.0.101 kernel with some minor changes:
R4.6.1
fixed CPU OC instabilities
LCDCLK is adjusted to fix tearing issues *
adjusted Dynamic CPU governor tunables for a better battery live
adjusted PowerHAL profiles **
genfstab: storages swap is disabled by default (remove /ramdisk/fstab_specs.txt before flashing to take this change in an effect)
updated temporary kernel zip
* tested with apps like Impossible Game, a display tearings are mostly resolved here. Apps like Youtube, though, might still causing tearings when playing video.
** the minimum CPU freq is set to 400 MHz. I've decided to use it as a default since 200 and 400 MHz CPUfreq steps are anyway using the same voltage, so unless you're undervolting the CPU, there won't be any significant difference in a battery drain.

ChronoMonochrome said:
** the minimum CPU freq is set to 400 MHz. I've decided to use it as a default since 200 and 400 MHz CPUfreq steps are anyway using the same voltage
Click to expand...
Click to collapse
On Lineage OS 11:
Using more accurately the Performance function in Lineage Os Settings (an example here), there are different bugs:
1) Minimum CPU freq here is still set at 200 MHz after I flashed chrono kernel 4.6.1.. but this time I forgot to flash the temporary kernel before your kernel.
Anyway chrono kernel 4.6.1 was flashed without issue using TWRP 2.8.7.0.
2) Maximum CPU freq is automatically restored at 1000 Mhz after any reboot, even if I set 1200 Mhz (with any governor).
3) Deadline scheduler is automatically set after any reboot, even if I set FIOPS as default scheduler.
4) Dynamic governor is automatically set after any reboot, even if I set Zenx as default governor.
5) On the Performance UI, performance profile results automatically set on Balanced after any reboot, even if I set Power save as default (it may be reproducible with "Performance" option too, I didn't check).
UPDATE: I've reinstalled chrono kernel again and these behaviors still happen.

For me the minimum freq was correctly 400 mhz as expected, as always running on stock 4.1.2.
After two days of use I can say you are following the right path.
This time I wanted to remove every possible source of doubts and I went for a clean installation, so doing a complete reset and flashing your kernel, of course after the temporary one. I still have the phone not going to deepsleep and the call issues (basically it is impossible to do and receive phone calls on stock rom).
A part from these I can say I didn't noticed any other issue at all, finding memory management a little improved compared to previous release and battery life still good, considering the phone isn't going to sleep mode.
I think this will continue to improve and soon all these glitches will just be gone away, thank you so much chrono also hoping to settle for a bit on your ultimateROM, only waiting for the vibration working, because that is basically the only notification for me

isaak said:
On Lineage OS 11:
Using more accurately the Performance function in Lineage Os Settings (an example here), there are different bugs:
1) Minimum CPU freq here is still set at 200 MHz after I flashed chrono kernel 4.6.1.. but this time I forgot to flash the temporary kernel before your kernel.
Anyway chrono kernel 4.6.1 was flashed without issue using TWRP 2.8.7.0.
2) Maximum CPU freq is automatically restored at 1000 Mhz after any reboot, even if I set 1200 Mhz (with any governor).
3) Deadline scheduler is automatically set after any reboot, even if I set FIOPS as default scheduler.
4) Dynamic governor is automatically set after any reboot, even if I set Zenx as default governor.
5) On the Performance UI, performance profile results automatically set on Balanced after any reboot, even if I set Power save as default (it may be reproducible with "Performance" option too, I didn't check).
UPDATE: I've reinstalled chrono kernel again and these behaviors still happen.
Click to expand...
Click to collapse
1) Isn't an issue here, the showed CPU frequency is 200 MHz, but the actual CPU pll clock set at 400 MHz. Might be confusing, but yet that is better for a battery life.
2) These aren't really bugs, it's how LOS 11.0 performance profiles works. To change min / max CPU freq, you either need to edit /ramdisk/perf.profiles.rc (and set a custom values) or disable perf profiles. Actually there is one more way - to remove CPUfreq adjusting lines completely from that script - would anyone like this change introduced in a new release?
3-4) I've checked it right now - no issues for me... Have you set "apply on boot" checkbox?
5) It's a known bug of CM11 perf profiles. AFAIK, @ace2nutzer fixed this bug in his CM11 builds. @ace2nutzer, can you please remind how this could be worked around?

ChronoMonochrome said:
2) Maximum CPU freq is automatically restored at 1000 Mhz after any reboot, even if I set 1200 Mhz (with any governor).
Click to expand...
Click to collapse
2) These aren't really bugs, it's how LOS 11.0 performance profiles works. To change min / max CPU freq, you either need to edit /ramdisk/perf.profiles.rc (and set a custom values) or disable perf profiles. Actually there is one more way - to remove CPUfreq adjusting lines completely from that script - would anyone like this change introduced in a new release?
Click to expand...
Click to collapse
Honestly I don't know how to disable perf profiles. If it's a simple thing to do (like a command or two to execute), please tell me how to do it because it's enough for me, otherwise I'd like to try the third way and see.
ChronoMonochrome said:
3) Deadline scheduler is automatically set after any reboot, even if I set FIOPS as default scheduler.
4) Dynamic governor is automatically set after any reboot, even if I set Zenx as default governor.
Click to expand...
Click to collapse
3-4) I've checked it right now - no issues for me... Have you set "apply on boot" checkbox?
Click to expand...
Click to collapse
Yes, "Set on boot" options are correctly set for both Processor and I/O Scheduler.
And I keep "Enable per-app profiles" option turned off.
@ChronoMonochrome
UPDATE 1: It occurs only randomly and with particular combinations. The best way to reproduce is to set these, one at a time:
1) Zenx as governor, min. 200 max 800, Noops scheduler. Reboot.
2) Zenx as governor, min. 200 max 800, Fiops scheduler. Reboot.
2) Zenx as governor, min. 200 max 800, Sioplus scheduler. Reboot.
After the first, the second or the third reboot, some of these values you've set will change spontaneously on their own.
UPDATE 2: I've got a screen flicker issue while I was browsing in Naked Browser with the new LCDCLK frequency.
Tried to set echo 1 > /sys/kernel/mcde/lcdclk, it's ok now, but I've noticed that this value is not kept after a reboot.
Do you need a specific log?
In case please write me any command and I'll give you the output.

isaak said:
On Lineage OS 11:
Using more accurately the Performance function in Lineage Os Settings (an example here), there are different bugs: .....
Click to expand...
Click to collapse
I suggest to keep it unchecked, otherwise it'll change the profile randomly, and that's probably not what u want.
ChronoMonochrome said:
....
5) It's a known bug of CM11 perf profiles. AFAIK, @ace2nutzer fixed this bug in his CM11 builds. @ace2nutzer, can you please remind how this could be worked around?
Click to expand...
Click to collapse
There's still no fix ! But what i did is to add the perf. profile in my control app ... that works fully independently.
But that's probably not what u guys want.
My last try was to do that over build.prop .. this works only for around 15 seconds (after wiping dalvik cache it's around 30 sec.) and then it sets back to "balanced" .. so i use it anyway just for speeding up the boot sequence:
Code:
# CM Performance Profiles (only during boot)
# 0= powersave; 1= balanced; 2= performance - default
sys.perf.profile=2
IMO the best way is to add the perf. profiles button to the quick settings, then it's very easy to switch between the 3 profiles.
Using the same profile for everything is for sure not the best option if u want performance + powersave at the same time.
Personally i use performance, and when i read an pdf or watch a YouTube Video then i switch to powersave.
Using powersave or even balanced for normal usage isn't recommended as it can drain even more battery than using performance, because it's slower and the CPU will stay too long on max. freq and the LCD also will stay longer ON, which leads both to increase power consumption.
So the faster the cpu is, the quicker it'll go on idle (min cpu 200) which is powersaving freq and the faster u'll turn OFF the screen, and logical bigger time on suspend --> deep sleep :highfive:

ace2nutzer said:
I suggest to keep it unchecked, otherwise it'll change the profile randomly, and that's probably not what u want.
There's still no fix ! But what i did is to add the perf. profile in my control app ... that works fully independently.
But that's probably not what u guys want.
My last try was to do that over build.prop .. this works only for around 15 seconds (after wiping dalvik cache it's around 30 sec.) and then it sets back to "balanced" .. so i use it anyway just for speeding up the boot sequence:
Code:
# CM Performance Profiles (only during boot)
# 0= powersave; 1= balanced; 2= performance - default
sys.perf.profile=2
IMO the best way is to add the perf. profiles button to the quick settings, then it's very easy to switch between the 3 profiles.
Using the same profile for everything is for sure not the best option if u want performance + powersave at the same time.
Personally i use performance, and when i read an pdf or watch a YouTube Video then i switch to powersave.
Using powersave or even balanced for normal usage isn't recommended as it can drain even more battery than using performance, because it's slower and the CPU will stay too long on max. freq and the LCD also will stay longer ON, which leads both to increase power consumption.
So the faster the cpu is, the quicker it'll go on idle (min cpu 200) which is powersaving freq and the faster u'll turn OFF the screen, and logical bigger time on suspend --> deep sleep :highfive:
Click to expand...
Click to collapse
Sorry for so late response, I had to take a break in a development because suddenly got sick with a flu (I'm fine now, btw) :silly:
I think I've found a temporary solution to this bug, take a look if you're interested:
https://github.com/ChronoMonochrome...mmit/bd0dcce403633543f1bf11e5f8b476a3e88322cb

New build is up!
Changelog
R4.6.2
rebased to CM14.1 branch (added support for 6.0.1 and 7.1.2 ROMs) *
Hey there! I've been testing 6.0.1 / 7.1.2 ROMs and I've recently got some issues with camera on 3.4.x kernel build, so I've decided to release a new refresh build (based on 3.0.101 sources).
I've rebased the most of recent changes to CM14.1 branch in order to support these ROMs (so if you're using older ROMs like stock 4.1.2 then better to use previous release cause some patches might be missing here).