Hi there, i am nekonoobey, a new user, from what i know, Will Remix OS Run on a 7-inch tablet (4.70-inches screen size, resolution : 1024 x 600 pixels (I guess thats on landscape Pose), 252 dpi)?, if not, i will be grateful with literally any custom rom that manage the ram a better way than the stock rom.
The kernel version is :
3.4.67 (T2-A7-20F_S000006_150624_ROW)
Kernel Architecture : armv7l
Java VM : Dalvik 1.6.0
Android Version : 4.4.2
API Level : 19
The Bootloader : unknown
Total RAM 983 MB, with everything closed except CPU-Z (458-or-457 MB)
Hardware : mt8127 (Mediatek, i guess)
Model : Tab2A7-20F (Changed via build.prop to LG Nexus 4, for another use that didn't work) Can't remember exactly...
Internal Storage Amount : 5.46 GB
Left (Due to the apps that i dont care about erasing) : 2.46 GB
SoC :
Cores : 4
Architecture : 4x ARM Cortex-A7 @ 1.30 GHz
Revision : r0p3
Clock Speed : 598 MHz - 1.30 GHz
CPU 0 : 1040 MHz
CPU 1 : 1040 MHz
CPU 2 : 1040 MHz
CPU 3 : 1040 MHz
(Tweaked with No-frills CPU Control)
Cpu Load (Just CPU-Z Open) : 15% 8% 6% 0% 1% 2% 4% 3% and a lot more depending wich app(s) is (are) open(ed)
GPU Vendor : ARM
GPU Load : (Not wasting more time observing the %) (Only if needed)
GPU Renderer Mali-450 MP
Scaling Governor : performance (Tweaked with No-frills CPU Control)
Rooted : Yes, with rooted kingoroot, SuperUser APP : Kingo Superuser.
Battery : Li-ion (YES! I AM IN CHILE WHERE THE BIGGEST LITHIUM DEPOSIT IN THE WORLD IS LOCATED)
Voltage : 3733 mV
Capacity : 2100 mAh
Sensors : MPU-6880 Six-Axis Acceloremeter (With X Y Z)
If anyone helped me, he (or she) will have my eternal gratitude!
Wrong Thread. This area is for Jide's Remix tablet.
AmoraRei said:
Wrong Thread. This area is for Jide's Remix tablet.
Click to expand...
Click to collapse
My lenovo tab2 a7 20f doesn't have a dedicated area!
Have an idea of where?
nekonoobey said:
My lenovo tab2 a7 20f doesn't have a dedicated area!
Have an idea of where?
Click to expand...
Click to collapse
its Remix OS on a Lenovo. So put it in the Remix OS section so someone over there can help you.
Related
Hello
i have a phone with the following specs :
model number : sm-n9100 (china model)
android version : 4.4.4
based version : N9100ZCU1ANIG
kernel version : 3.10.0-2828982
build number : KTU84P.N9100ZCU1ANIF
custom build version : KTU84P1107
hardware : mt6572 / 8 core / 3 ghz
gpu : adreno 330
the problem is in games, always when i open a game it crash after 1 min then this 1 min decreases each time i start the game again until the game crash just after it open (after opening the game 4-5 times) then i have to restart my phone to go back for a full 1 min .
note:
1- i didnt change anything in my phone (frimware , rom , .... etc ) because i dont know about this
2- my phone is rooted.
i need help to solve this problem please
thnx in advance
Hello! New to the forum here. I am an IT professional but not much of a developer, hopefully that is okay here
I have rooted devices and done some basic things with Android. I have purchased (and love so far) a Blaupunkt Cape Town 940(US) and installed it in my truck. Like it so much , I also got one for the wife's car!
I am trying to see if I can, without rooting, add Google services to it. It is running Android 4.1.1 out of the box, and I as going to follow the instructions similar to a Kindle Fire from here.
Do I need updated Google .apk's since those are old? Where can I get current ones? I'd like to add the apk's to my a micro SD and just install them from the file explored. I'm not looking for much, just the out of the box Gapps that will work with 4.1.1. Will the newer ones work, or do the older ones update once installed?
Lastly, does anyone know where there may be more good info on the web about this device, or people using it? I am having a hard time finding anything, aside from a firmware update from the Blaupunkt website, they do not have a lot of helpful content on their website.
Thanks so much!
Seriously can't find any help on the net for this thing..... Any know how to side-load google apps on this thing, or what versions?
I am also looking for this information. Will post here if I get anything.
I subscribe to the threat.
I bought a Suzuki New Vitara and the radio stock is a blaupunkt cape town 940, I can install from Amazon store but not play store. I can't forward or rewind Spotify songs from controls of steering wheel.
I have problems to download songs from Spotify in external sd card.
Anyone upgraded the firmware?
http://www.blaupunkt.com/us/nc/supp.../?uid=6605&tx_ddfservicedoku_pi1[view]=single
Cape Town 940
I need help like you guys. Maybe even more since I'm 50 years old and much of this stuff is over my head. I'm trying to do what you guys are want. However I did find a site that is dedicated to GPS units and it's called GPSpower.net. They actually have some information over there but if way over my head. I hope one of you guys can break it down and even make a video and post it on youtube from someone like me so I can pause it as I go. lol
You can add google services by getting the app from Blaupunkt support. I asked and they sent one to me but they do not support it. I now have all google services.
Could you please post the support email or the app they sent you?? I've tried without success to contact them. Thank you
CP 940 USA owner here. For me the easiest way to install Google GAPPS was with an app called "Google Play Installer v1.1.2 for Google Play Store v6.2.10" Just click and wait for the reboot.
I have to admit I initially disliked this unit, coming from a Parrot Asteroid Smart. But after a few days tweaking the sound and launcher, I have changed my opinion. Now if only it could verbally verify who it is dialing AND if I could turn off the 'Multi Audio' option when switching to an external app (like TuneIN) I'd be really really happy.
BTW to use a Axxess ASWC-1 steering wheel interface with this unit, you have to manually specify Type 11 METRA O.E. as the radio type.
There's another thread on XDA with a link from Blaupunkt. Ihaven't used this method: http://forum.xda-developers.com/and...d-units/android-4-1-1-hu-load-issues-t3339071
Hi,
I am thinking getting one of units, I can not seem to find a couple of bits of info. I have contact Blaupunkt, but they are not sure. Can some one tell me if there is a folder limitation or usb memory stick size limitation. Blaupunkt say up to 44000 files, but over how many folders etc. Also, does the stock music player have gapless playback?
Thanks
Koush1
Hi,
I regularly use a 64GB USB drive full of movies and music. Except for the few seconds the unit takes to discover and index the files, I haven't experienced any problems. I do think the internal MicroSD card readers are limited to 32GB though.
Anyone using other Bluetooth devices rather than phones? I tried to connect OBDII scanner to my unit but it failed to pair, just like that = "Pairing Failed" message. Have a theory that the unit may have a limitation - to connect only the BT devices with phone/sound services. I was going to use lots of other yummies - BT tyre pressure app, BT front camera, but now I'm not sure...
Hi... This unit does not have the Bluetooth SPP (Serial Port Protocol) so it cannot be used with an OBD2 interface to display OBD apps on-screen (Torque, Dashcommand, etc).
Thanks for clarification! Do you think it would be possible to "add" that protocol somehow? I mean - install a 3rd-party "driver" app to the OS? Or it is deeper on the hardware level..?
Personally I don't know. But found an app that *could* be what you're looking for: Bluetooth SPP Manager. https://play.google.com/store/apps/details?id=at.rtcmanager&hl=en
Good luck!
Is there anyone that solved the multiaudio issue? It is really annoying The other thing that i can't stand is the voice dialing that does not work (at least with my android phone - honor 7). Also having problems with google voice search that won't silence the music playing, and catches words from song...
I have installed Co-Pilot Truck and it works very well. You can play with the media channel by installing an APK that adjusts the sound. I found one that you can use if you break the volume button. Turning media volume up certainly makes it clearer. I have fitted a CX-401 CanBus interface for my FIAT Motorhome and when the IGO Navigation is speaking you can increase the sound. The ROOT Function works and you can access Google Play Store. Delete your account if you don't want updates all the while. A lot of APPS on the Play Store require a log in so they can get their ADS Downloaded. I have ROOTED mine and installed APKS from none GPStore. Have the extra screen working which is a nice feature and tried to add BT headphones but no luck yet with everything I have tried.
There's a 2017 firmware for the 945 EU unit which can be flashed to our 940s. It fixes a few issues: the voice dialing now works and the phone assistant (Siri, Google, etc) can be heard on the speakers. It also 'remembers' the multiaudio setting after a phone call. Yes, multiaudio still has to be turned off before using TuneIn, for example. BTW this firmware comes with version 6 of TuneIn which has album art and no on-screen ads. Neat! The WiFi turning off because of a bad signal has also been fixed. Only bug I've found so far: the Volume at power on setting has to be set, then turned off, on again and then it will work.
I removed the apps I don't need (DAB, DVB-T, etc) with Titanium Backup.
The link for this firmware is found here: http://www.blaupunkt.com/fileadmin/...IEL/SW/20170220/1011403920001_SW_20170220.zip
Cape Town app
Hello
What is the version of Android with this update, still V4.1.1?
Can you tell me a little more about the characteristics of CAPE TOWN 940 or 945
- Memory: how much Go RAM? How much Go ROM?
- Number of core etc ...
Because Blaupunk is more than discreet on the subject
Have you installed the latest version of Waze V4.22 or V4.23?
Thanks for the reply and good day
Hi...
Here's the info from my unit:
General Specifications
Manufacturer: MStar Semiconductor, Inc.
Model: Full AOSP on MStar Cedric3
Android: 4.1.1; V1.0.1.0; SDK16
KERNEL: Linux version 3.4.5 ([email protected]) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04) ) 12821 20150720
uboot version: U-Boot V00.01.12
kernel version: V03.02.43 20150720
rtk version: 00788256
CODENAME: REL
Mainboard: unknown
BRAND: Mstar
CPU_ABI: armeabi-v7a
CPU_ABI2: armeabi
DEVICE: mstarcedric3
DISPLAY: Android-4.1.1 V0.20.158U
FINGERPRINT: Mstar/full_mstarcedric3/mstarcedric3:4.1.1/JRO03C/V1.0.1.0:userdebug/test-keys
HARDWARE: cedric
ID: JRO03C
TAGS: test-keys
Display: 800 x 480; DPI: 240; Evaluated Size: 3.9"
Touch Screen: Multitouch 5 points
GPU: Mali-400 MP; ARM; OpenGL ES-CM 1.1; OpenGL ES 2.0
GL_EXT_debug_marker
GL_OES_texture_npot
GL_OES_compressed_ETC1_RGB8_texture
GL_OES_standard_derivatives
GL_OES_EGL_image
GL_OES_depth24
GL_ARM_rgba8
GL_ARM_mali_shader_binary
GL_OES_depth_texture
GL_OES_packed_depth_stencil
GL_EXT_texture_format_BGRA8888
GL_EXT_blend_minmax
GL_OES_EGL_image_external
GL_OES_EGL_sync
GL_OES_rgb8_rgba8
GL_EXT_multisampled_render_to_texture
GL_EXT_discard_framebuffer
GL_OES_get_program_binary
GL_ARM_mali_program_binary
GL_EXT_shader_texture_lod
GL_EXT_robustness
RAM: 1024 MB (1014 MB available)
System RAM: 1014.000MB
Flash: 8 GB Build-in (7.281 GB actual); 66.904 GB
mmcblk0: 7.281 GB
mmcblk1: 7.279 GB
mmcblk2: 59.625 GB
Processor: 2 cores; ARMv7 Processor rev 0 (v7l) cedric
Processor : ARMv7 Processor rev 0 (v7l)
processor : 0
BogoMIPS : 1790.77
processor : 1
BogoMIPS : 1784.21
Features : swp half thumb fastmult vfp edsp neon vfpv3 tls
CPU implementer : 0x41
CPU architecture: 7
CPU variant : 0x3
CPU part : 0xc09
CPU revision : 0
Hardware : cedric
Revision : 0000
Serial : 0000000000000000
Communications
Phone: None
WiFi: 8188eu; IEEE 802.11 b/g/n; Realtek RTL8188E; AP Mode
USB Host: Yes
Bluetooth: no
GPS: Yes
Additional Features
Battery: Technology: null; Voltage: 0
Camera: Photo: 2.1 MP; Max: 1920x1080; Video: 2.1 MP; Max: 1920x1080; Focus: auto; Flash modes: auto
Additional Camera: Photo: 0.9 MP; Max size: 1280x720; Video: 0.9 MP; Max: 1280x720; Focus: auto; Flash modes: auto
Vibrator: No
Supported languages: 47; Afrikaans; Amharic; Arabic; Belarusian; Bulgarian; Catalan; Czech; Danish; German; Greek; English; Spanish; Estonian; Persian; Finnish; Filipino; French; Hebrew; Hindi; Croatian; Hungarian; Indonesian; Italian; Japanese; Korean; Lithuanian; Latvian; Malay; Norwegian; Dutch; Polish; Pashto; Portuguese; Romansh; Romanian; Russian; Slovak; Slovenian; Serbian; Swedish; Swahili; Thai; Turkish; Ukrainian; Vietnamese; Chinese; Zulu
Auto Generated by: Spec Device (www.specdevice.com)
yellowdragon said:
Hi...
Here's the info from my unit:
General Specifications
Manufacturer: MStar Semiconductor, Inc.
Model: Full AOSP on MStar Cedric3
Android: 4.1.1; V1.0.1.0; SDK16
KERNEL: Linux version 3.4.5 ([email protected]) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04) ) 12821 20150720
uboot version: U-Boot V00.01.12
kernel version: V03.02.43 20150720
rtk version: 00788256
CODENAME: REL
Mainboard: unknown
BRAND: Mstar
CPU_ABI: armeabi-v7a
CPU_ABI2: armeabi
DEVICE: mstarcedric3
DISPLAY: Android-4.1.1 V0.20.158U
FINGERPRINT: Mstar/full_mstarcedric3/mstarcedric3:4.1.1/JRO03C/V1.0.1.0:userdebug/test-keys
HARDWARE: cedric
ID: JRO03C
TAGS: test-keys
Display: 800 x 480; DPI: 240; Evaluated Size: 3.9"
Touch Screen: Multitouch 5 points
GPU: Mali-400 MP; ARM; OpenGL ES-CM 1.1; OpenGL ES 2.0
GL_EXT_debug_marker
GL_OES_texture_npot
GL_OES_compressed_ETC1_RGB8_texture
GL_OES_standard_derivatives
GL_OES_EGL_image
GL_OES_depth24
GL_ARM_rgba8
GL_ARM_mali_shader_binary
GL_OES_depth_texture
GL_OES_packed_depth_stencil
GL_EXT_texture_format_BGRA8888
GL_EXT_blend_minmax
GL_OES_EGL_image_external
GL_OES_EGL_sync
GL_OES_rgb8_rgba8
GL_EXT_multisampled_render_to_texture
GL_EXT_discard_framebuffer
GL_OES_get_program_binary
GL_ARM_mali_program_binary
GL_EXT_shader_texture_lod
GL_EXT_robustness
RAM: 1024 MB (1014 MB available)
System RAM: 1014.000MB
Flash: 8 GB Build-in (7.281 GB actual); 66.904 GB
mmcblk0: 7.281 GB
mmcblk1: 7.279 GB
mmcblk2: 59.625 GB
Processor: 2 cores; ARMv7 Processor rev 0 (v7l) cedric
Processor : ARMv7 Processor rev 0 (v7l)
processor : 0
BogoMIPS : 1790.77
processor : 1
BogoMIPS : 1784.21
Features : swp half thumb fastmult vfp edsp neon vfpv3 tls
CPU implementer : 0x41
CPU architecture: 7
CPU variant : 0x3
CPU part : 0xc09
CPU revision : 0
Hardware : cedric
Revision : 0000
Serial : 0000000000000000
Communications
Phone: None
WiFi: 8188eu; IEEE 802.11 b/g/n; Realtek RTL8188E; AP Mode
USB Host: Yes
Bluetooth: no
GPS: Yes
Additional Features
Battery: Technology: null; Voltage: 0
Camera: Photo: 2.1 MP; Max: 1920x1080; Video: 2.1 MP; Max: 1920x1080; Focus: auto; Flash modes: auto
Additional Camera: Photo: 0.9 MP; Max size: 1280x720; Video: 0.9 MP; Max: 1280x720; Focus: auto; Flash modes: auto
Vibrator: No
Supported languages: 47; Afrikaans; Amharic; Arabic; Belarusian; Bulgarian; Catalan; Czech; Danish; German; Greek; English; Spanish; Estonian; Persian; Finnish; Filipino; French; Hebrew; Hindi; Croatian; Hungarian; Indonesian; Italian; Japanese; Korean; Lithuanian; Latvian; Malay; Norwegian; Dutch; Polish; Pashto; Portuguese; Romansh; Romanian; Russian; Slovak; Slovenian; Serbian; Swedish; Swahili; Thai; Turkish; Ukrainian; Vietnamese; Chinese; Zulu
Auto Generated by: Spec Device (www.specdevice.com)
Click to expand...
Click to collapse
Hello yellowdragon
Thank you for this desciption very precise, I am even surprised when you indicate:
-Phone: None
-Bluetooth: no
It is however the only indispensable function in a car radio to send or receive phone calls
Hello,
I bought this R9 headunit from aliexpress (seller was JMCQ) and when I go into the "System Info" it does not display any information about the MCU type? It only says MCU1: 0.5 (3561) shouldn't there be a string of numbers there? Also if i try to access the about device in the android settings it shows everything except an MCU. Here are pictures of what I'm talking about:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Here is the head units info:
DEVICE
Model: evb3561sv_w_65_m0 (full_evb3561sv_w_65_m0)
Manufacturer: alps
Baseband Version: MOLY.LR9.W1444.MD.LWTG.MP.V94.P6, 2018/08/16
13:44
RIL Version: mtk gemini ril 1.0
Build Number: YT3560_00012_V012
Build Fingerprint: alps/full_evb3561sv_w_65_m0/evb3561sv_w_65_m0:6.0/MR
A58K/1572320644:user/test-keys
Bootloader: unknown
Java VM: ART 2.1.0
OS Version: Marshmallow (6.0)
SDK: 23
DISPLAY
Resolution: 1024x600 pixels
Software Density: 160 dpi (mdpi)
Refresh Rate: 57.44 Hz
PROCESSOR
CPU Architecture: AArch64 Processor rev 4 (aarch64)
Board: unknown
Chipset: MT3561S
Cores: 4
Clock Speed: 221 MHz - 1248 MHz
Instruction Sets: arm64-v8a
CPU Features: fp asimd evtstrm aes pmull sha1 sha2 crc32
CPU Governor: performance
Kernel Version: 3.18.19
Kernel Architecture: aarch64
GRAPHICS
Renderer: Mali-T720
Vendor: ARM
OpenGL Version: OpenGL ES 3.0
RAM
Total: 2048 MB
This report is generated by Droid Info Android app.
Java Heap: 128 MB
STORAGE
Internal: 25.8 GB
External: 25.8 GB
PRIMARY CAMERA
Resolution: 0.4 MP
Flash: Yes
Video Resolution: 1904x232
Supported Resolutions:
Image:
1904x232
Video:
1904x232
FEATURES
Bluetooth: Yes
Bluetooth LE: Yes
GPS: Yes
NFC: No
USB Accessory: Yes
WiFi: Yes
WiFi Direct: Yes
BATTERY
Technology: Li-ion
Health: Good
SENSORS
Not Available
Can anyone help me identify what type of MCU this is (MTCD/C or MTCB ?) so that I don't flash the wrong rom? I'm hoping it is compatible with Hal9ks rom..
Ahhouai said:
Hello,
I bought this R9 headunit from aliexpress (seller was JMCQ) and when I go into the "System Info" it does not display any information about the MCU type? It only says MCU1: 0.5 (3561) shouldn't there be a string of numbers there? Also if i try to access the about device in the android settings it shows everything except an MCU.
Here are pictures of what I'm talking about:
Here is the head units info:
DEVICE
Model: evb3561sv_w_65_m0 (full_evb3561sv_w_65_m0)
Manufacturer: alps
Baseband Version: MOLY.LR9.W1444.MD.LWTG.MP.V94.P6, 2018/08/16
13:44
RIL Version: mtk gemini ril 1.0
Build Number: YT3560_00012_V012
Build Fingerprint: alps/full_evb3561sv_w_65_m0/evb3561sv_w_65_m0:6.0/MR
A58K/1572320644:user/test-keys
Bootloader: unknown
Java VM: ART 2.1.0
OS Version: Marshmallow (6.0)
SDK: 23
DISPLAY
Resolution: 1024x600 pixels
Software Density: 160 dpi (mdpi)
Refresh Rate: 57.44 Hz
PROCESSOR
CPU Architecture: AArch64 Processor rev 4 (aarch64)
Board: unknown
Chipset: MT3561S
Cores: 4
Clock Speed: 221 MHz - 1248 MHz
Instruction Sets: arm64-v8a
CPU Features: fp asimd evtstrm aes pmull sha1 sha2 crc32
CPU Governor: performance
Kernel Version: 3.18.19
Kernel Architecture: aarch64
GRAPHICS
Renderer: Mali-T720
Vendor: ARM
OpenGL Version: OpenGL ES 3.0
RAM
Total: 2048 MB
This report is generated by Droid Info Android app.
Java Heap: 128 MB
STORAGE
Internal: 25.8 GB
External: 25.8 GB
PRIMARY CAMERA
Resolution: 0.4 MP
Flash: Yes
Video Resolution: 1904x232
Supported Resolutions:
Image:
1904x232
Video:
1904x232
FEATURES
Bluetooth: Yes
Bluetooth LE: Yes
GPS: Yes
NFC: No
USB Accessory: Yes
WiFi: Yes
WiFi Direct: Yes
BATTERY
Technology: Li-ion
Health: Good
SENSORS
Not Available
Can anyone help me identify what type of MCU this is (MTCD/C or MTCB ?) so that I don't flash the wrong rom? I'm hoping it is compatible with Hal9ks rom..
Click to expand...
Click to collapse
Not an MTCx unit. Try searches based on the information not hidden.
Ahhouai said:
Hello,
I bought this R9 headunit from aliexpress (seller was JMCQ) and when I go into the "System Info" it does not display any information about the MCU type? It only says MCU1: 0.5 (3561) shouldn't there be a string of numbers there? Also if i try to access the about device in the android settings it shows everything except an MCU. Here are pictures of what I'm talking about:
Here is the head units info:
DEVICE
Model: evb3561sv_w_65_m0 (full_evb3561sv_w_65_m0)
Manufacturer: alps
Baseband Version: MOLY.LR9.W1444.MD.LWTG.MP.V94.P6, 2018/08/16
13:44
RIL Version: mtk gemini ril 1.0
Build Number: YT3560_00012_V012
Build Fingerprint: alps/full_evb3561sv_w_65_m0/evb3561sv_w_65_m0:6.0/MR
A58K/1572320644:user/test-keys
Bootloader: unknown
Java VM: ART 2.1.0
OS Version: Marshmallow (6.0)
SDK: 23
DISPLAY
Resolution: 1024x600 pixels
Software Density: 160 dpi (mdpi)
Refresh Rate: 57.44 Hz
PROCESSOR
CPU Architecture: AArch64 Processor rev 4 (aarch64)
Board: unknown
Chipset: MT3561S
Cores: 4
Clock Speed: 221 MHz - 1248 MHz
Instruction Sets: arm64-v8a
CPU Features: fp asimd evtstrm aes pmull sha1 sha2 crc32
CPU Governor: performance
Kernel Version: 3.18.19
Kernel Architecture: aarch64
GRAPHICS
Renderer: Mali-T720
Vendor: ARM
OpenGL Version: OpenGL ES 3.0
RAM
Total: 2048 MB
This report is generated by Droid Info Android app.
Java Heap: 128 MB
STORAGE
Internal: 25.8 GB
External: 25.8 GB
PRIMARY CAMERA
Resolution: 0.4 MP
Flash: Yes
Video Resolution: 1904x232
Supported Resolutions:
Image:
1904x232
Video:
1904x232
FEATURES
Bluetooth: Yes
Bluetooth LE: Yes
GPS: Yes
NFC: No
USB Accessory: Yes
WiFi: Yes
WiFi Direct: Yes
BATTERY
Technology: Li-ion
Health: Good
SENSORS
Not Available
Can anyone help me identify what type of MCU this is (MTCD/C or MTCB ?) so that I don't flash the wrong rom? I'm hoping it is compatible with Hal9ks rom.. [/QUOTEI have same problem
Click to expand...
Click to collapse
marchnz said:
Not an MTCx unit. Try searches based on the information not hidden.
Click to expand...
Click to collapse
Does this mean I'm out of luck for flashing ROMs?
Ahhouai said:
Does this mean I'm out of luck for flashing ROMs?
Click to expand...
Click to collapse
I have the same issue with the radio I bought.
Sent from my SM-A705MN using Tapatalk
Anyone know if there's a way to load TWRP on this unit?
The android version is fake. Actually it is Android 6.
The solution provider (actual manufacture) is XY AUTO (掌讯). And this model YT3560 never has an Android system higher than 6.0.
If you google "掌讯3560“, you'll find that all Chinese firmware has version 安卓6.0M (Android 6 Marshmallow), and the "international" firmware has Android 8.1 or 9.1, which are fake.
The one I bought is advertized as "rotatable screen". But actually the system doesn't support the screen rotation at all. To make the system working in portrait mode, it needs the "vertical screen ROM" to be flashed.
My suggestion is never buy a unit from XY AUTO again.
---------- Post added at 02:30 AM ---------- Previous post was at 02:11 AM ----------
Here I found some firmware update packages: https://www.mobile01.com/topicdetail.php?f=519&t=6047144
To be honest, I'm not sure if it will become Chinese system after flashing the update. However, I'm pasting the update for YT3560 here.
Landscape mode (2020-03-06) https://mega.nz/#!RzIUlQRT!_sp-cPTxS2_j_eAC4BQYHGsxZ9p7bv0KbCjTeQzmD4w
Portrait mode (2020-06-18) https://mega.nz/file/dqwxnICS#mERfv2SOL9To_M0DFO8cep9gA1JEBlQuIFv5Uqxaci8
The system is still Android 6.0. I assume the update is only minor tweaks.
I found a way to "rotate" the screen.
First, in "Car settings" -> "Other settings", untick the "Screen setting - Force mode".
Then, install screen rotation soft button: https://play.google.com/store/apps/details?id=com.alwaysrotate
Now, my problem is there is not a good launcher for portrait mode. And several stock app doesn't support portrait mode very well.
Hi, i have the same unit. My problem is the audio in a phone call using BT. I listen perfectly but the other person listen to me far away. Almost nothing.
Do you have the same problem?
BR.
chupitobaena said:
Hi, i have the same unit. My problem is the audio in a phone call using BT. I listen perfectly but the other person listen to me far away. Almost nothing.
Do you have the same problem?
BR.
Click to expand...
Click to collapse
Mine has the same problem. I'm thinking change it to a PX6 or TS9 unit. This YT3560 unit has too many issues.
Hi,
I am using YT3560 along with RAISE Can Bus. I am having the problem with built in mic. I am able to hear others without any issue. But, others complaining that my voice is low and lot of noise. Even I have disconnected the supplied external mic. But no improvement.
Can anybody suggest if we replace with a good external mic, will this solve the problem?
Further, my Car Information not showing RPM Rev data. All other data receiving from Raise Can Bus. Am I missing any setting or is it an issue with my Vehicle ?
My car is Skoda Rapid (India) Ambition - 2017 Model.
Please suggest how can I solve the issue:
1. Rev RPM data in my car information
2. MIC issues
Thank you.
snailium said:
The android version is fake. Actually it is Android 6.
The solution provider (actual manufacture) is XY AUTO (掌讯). And this model YT3560 never has an Android system higher than 6.0.
If you google "掌讯3560“, you'll find that all Chinese firmware has version 安卓6.0M (Android 6 Marshmallow), and the "international" firmware has Android 8.1 or 9.1, which are fake.
The one I bought is advertized as "rotatable screen". But actually the system doesn't support the screen rotation at all. To make the system working in portrait mode, it needs the "vertical screen ROM" to be flashed.
My suggestion is never buy a unit from XY AUTO again.
---------- Post added at 02:30 AM ---------- Previous post was at 02:11 AM ----------
Here I found some firmware update packages: https://www.mobile01.com/topicdetail.php?f=519&t=6047144
To be honest, I'm not sure if it will become Chinese system after flashing the update. However, I'm pasting the update for YT3560 here.
Landscape mode (2020-03-06) https://mega.nz/#!RzIUlQRT!_sp-cPTxS2_j_eAC4BQYHGsxZ9p7bv0KbCjTeQzmD4w
Portrait mode (2020-06-18) https://mega.nz/file/dqwxnICS#mERfv2SOL9To_M0DFO8cep9gA1JEBlQuIFv5Uqxaci8
The system is still Android 6.0. I assume the update is only minor tweaks.
Click to expand...
Click to collapse
Thanks for these! I found a newer update 2020/08/07 and it fixed a lot of my sound issues (volume dipping). The mobile01.com files seem to have password protection now so I could not download those. Can confirm this 20200807 package works on YT3560 XY Auto DSP with ST7850 Amplifier. My board is also V1.31.
Download link for the 20200807 update: https://mega.nz/file/PNUwHBYA#5eYuPVDgytHUV0Yg3hbQZZA9hgi3IfKwzy5gj69aGdE
Ahhouai said:
Download link for the 20200807 update: https://mega.nz/file/PNUwHBYA#5eYuPVDgytHUV0Yg3hbQZZA9hgi3IfKwzy5gj69aGdE
Click to expand...
Click to collapse
is this one legit to be used for 3560 unit?
codearm2 said:
is this one legit to be used for 3560 unit?
Click to expand...
Click to collapse
You can see my system in the OP and determine for yourself if it's the same as yours.
Ahhouai said:
You can see my system in the OP and determine for yourself if it's the same as yours.
Click to expand...
Click to collapse
It is the same
But mine is 4G version
Just wonder if it will lose the 4G function and make it into Wifi only unit
Also how about the language?
codearm2 said:
It is the same
But mine is 4G version
Just wonder if it will lose the 4G function and make it into Wifi only unit
Also how about the language?
Click to expand...
Click to collapse
Mine's 4G as well and still working (despite **** speed because of the antenna bands but that's always been the case). Language stayed the same as my system settings.
Ahhouai said:
Mine's 4G as well and still working (despite **** speed because of the antenna bands but that's always been the case). Language stayed the same as my system settings.
Click to expand...
Click to collapse
Nice!
Yeah the speed is ****ty, I can reach 80 Mbps on my phone using 4G
But on the head unit, it's only around 3-4 Mbps
Still enough for navigating and spotify though
Btw, what's the difference between vertical and horizontal fw?
3560 Horizontal screen (2020/03/06)
3560 Vertical screen (2020/06/18)
Found it from other forum (mobile01)
Is it the same like yours?
Also I attached the details of my head unit, it is the same right?
Just wonder if it's suitable to flash the rom
Ahhouai said:
Download link for the 20200807 update: https://mega.nz/file/PNUwHBYA#5eYuPVDgytHUV0Yg3hbQZZA9hgi3IfKwzy5gj69aGdE
Click to expand...
Click to collapse
boss,
what to do after downloading ?
how to install this ?
how to connect google assistant with steering wheel switch ?
Hello all
I have purchased a chinese MCU recently, it works fine but the sound is low comparing to the original MCU.
i searched a lot on the internet to try and find if there is maybe an update to the firmware or android version but its really confusing and i though maybe someone here will be able to help maybe finding firmware and android update to the MCU, or maybe a way to boost audio output With an app or something.
Here is the info retrieved from the MCU by CPU-Z
SOC
Cores : 4
Architecture 4x ARM Cortex-A7 @1.12 GHz
Revision r0p3
Clock Speed 598MHz - 1.12 GHz
CPU 0 1118 MHz
CPU 1 1118 MHz
CPU 2 1118 MHz
CPU 3 1118 MHz
GPU Vendor ARM
GPU Render Mall-450 MP
GPU Load 0%
Scaling Governor performance
DEVICE
Model F9212A(full_8227L_demo)
Manufacturer aips
Board unknown
Hardware ac8227l
Screen Size 5.83 inches
Screen Density 160 dpl
Total RAM 1024 MB
Available RAM 316 MB (30%)
Internal Storage 11.96 GB
Available Storage 10.69 GB (89%)
SYSTEM
Android Version 10.0
API Level 29
Security Patch Level 2020-02-01
Bootloader unknown
Build ID F9212A_00017_V001
Java VM ART 2.1.0
OpenGL ES 2.0
Kernel Architecture armv71
Kernel Version 3.18.79 (1614921830)
Root Access No
Google play Services 22.12.15 (040300-439420056)
System Uptime 3 days, 04:15:30
Hope those info are enough, thanks for the help in advance
i have the latest version 7.3, now it has a separate application for the equalizer, but the audio output strength depends on the audio chip, I am a manufacturer and there is an option to manufacture with DSP (digital sound processor) this one does sound much louder than the original
Darkhack3r77 said:
i have the latest version 7.3, now it has a separate application for the equalizer, but the audio output strength depends on the audio chip, I am a manufacturer and there is an option to manufacture with DSP (digital sound processor) this one does sound much louder than the original
Click to expand...
Click to collapse
Hello @Darkhack3r77
When you say Latest Version 7.3 do you mean android version?
and is it possible to change this one audio chip ? os should i purchase a new one that supports DSP?
Thanks
So no one really have an answer ?
هل يمكنك مساعدتي ، أحتاج 9212 ملفات كاملة
ZaKzOuKer said:
Hello all
I have purchased a chinese MCU recently, it works fine but the sound is low comparing to the original MCU.
i searched a lot on the internet to try and find if there is maybe an update to the firmware or android version but its really confusing and i though maybe someone here will be able to help maybe finding firmware and android update to the MCU, or maybe a way to boost audio output With an app or something.
Here is the info retrieved from the MCU by CPU-Z
SOC
Cores : 4
Architecture 4x ARM Cortex-A7 @1.12 GHz
Revision r0p3
Clock Speed 598MHz - 1.12 GHz
CPU 0 1118 MHz
CPU 1 1118 MHz
CPU 2 1118 MHz
CPU 3 1118 MHz
GPU Vendor ARM
GPU Render Mall-450 MP
GPU Load 0%
Scaling Governor performance
DEVICE
Model F9212A(full_8227L_demo)
Manufacturer aips
Board unknown
Hardware ac8227l
Screen Size 5.83 inches
Screen Density 160 dpl
Total RAM 1024 MB
Available RAM 316 MB (30%)
Internal Storage 11.96 GB
Available Storage 10.69 GB (89%)
SYSTEM
Android Version 10.0
API Level 29
Security Patch Level 2020-02-01
Bootloader unknown
Build ID F9212A_00017_V001
Java VM ART 2.1.0
OpenGL ES 2.0
Kernel Architecture armv71
Kernel Version 3.18.79 (1614921830)
Root Access No
Google play Services 22.12.15 (040300-439420056)
System Uptime 3 days, 04:15:30
Hope those info are enough, thanks for the help in advance
Click to expand...
Click to collapse
Do you by any chance have a memory dump? I got the same spec head unit with software issues for cheap, thinking it would be simple to fix it, untill I trried to flash it with wrong firmware and totally forgot to remove the preloader. If you have a dump I would be very greatful.
ZaKzOuKer said:
Hello @Darkhack3r77
When you say Latest Version 7.3 do you mean android version?
and is it possible to change this one audio chip ? os should i purchase a new one that supports DSP?
Thanks
Click to expand...
Click to collapse
sorry for the late reply, if you need the rom ADD ME ON WSP +52 7773740878 i will help you
AFALAH said:
هل يمكنك مساعدتي ، أحتاج 9212 ملفات كاملة
Click to expand...
Click to collapse
اخي هل استطعت ايجاد فلاش هذا الجهاز f9212a
Hello friends
I buy a chinese 10" 1din headunit and i have a problem with the steering wheel controls,the buttons next/previous work only with default apks (video player/music player/radio).
I test a lot of third-party apks but don't works, (an other car with other chinese headunit all apks work perfect the next/previous buttons).
I update everything and next hard reset but don't fix.
Its big problem for me and i don't know how i resolve it..
Device info:
--------------------------------------------------------
Device Name : tb8163p3_bsp
Model : tb8163p3_bsp
Manufacturer : alps
Device : tb8163p3_bsp
Board : tb8163p3_bsp
Hardware : mt8163
Brand : alps
Build Fingerprint : alps/full_tb8163p3_bsp/tb8163p3_bsp:12 skin/PPR1.180610.011/eng.publis.20220917.100736:user/release-keys
System info:
--------------------------------------------------------
Android Version : 12 skin
Version Name : Pie
Released Date : Αυγούστου 09, 2018
Code Name : Pie
API Level : 28
Security Patch Level : 2021-09-05
Bootloader : unknown
Build Number : full_tb8163p3_bsp-user 12 skin PPR1.180610.011 eng.publis.20220917.100736 release-keys
Baseband :
Java VM : 2.1.0
Kernel : 4.9.117+
Language : (el_GR)
OpenGL ES : 3.1
Root Management Apps : No Apps Detected
SELinux : Unable to determine
Google Play Services : 23.08.15 (100300-512743456)
Vulkan : Supported (1.1)
Treble : Supported
Seamless Updates : Not Supported
CPUinfo:
--------------------------------------------------------
Processor : ARMv7 Processor rev 3 (v7l)
CPU Architecture : 4 x 1.30 GHz
Supported ABIs : armeabi-v7a, armeabi
CPU Hardware : MT8163
CPU Type : 32 Bit
CPU Governor : interactive
Cores : 4
CPU Frequency : 600 MHz - 1300 MHz
GPU Renderer : Mali-T720
GPU Vendor : ARM
GPU Version : OpenGL ES 3.1 v1.r26p0-01rel0.526d936ea9da20486773a9aaceecd920
Any help?
First: Do you know what codes your SWC are generating?
If it works fine for all the stock things then you might want to modify these 3rd party apps.
Use UsbMode.apk (in my sig) to see what the SWC (mapped through the stock software) are generating.
There is also the possibility of per-app mapping. But I don't do that.
No i don't know the SWC codes (i am rookie).
i use you apk and if i push next/pre button the apk write this.
Today i test the UsbMode.apk with SWC buttons and don't work!only with head unit buttons work.
My friend give me for test a topway ts7 head unit and i put to mycar (with my canbus),all third-party apps work perfect...
I don't understant where the problem in my headunit.
sorry for my english