Greetings fellow telephony addicts - purchased a Boost Mobile Moto E w/5.1 (xt1526) because of apparent ease of ul'ing bl and rooting. True enough --
However since then I've been trying to get the device to allow use of a GSM SIM (USA/att.) Recently did it on a vzw (xt1528) no problem following instructions found here bit the xt1526 has beaten me senseless, going so far as to install cm13 in a totally illogical move. It works beautifuly, if you don't need calls or mms. Searched the crap out of the E forums with a couple of tips that did not pan out.
Anyone give me any hints /tips or even a nay as in "you dummy you can't to that!"
TIA,
Littlalex
littlalex said:
Greetings fellow telephony addicts - purchased a Boost Mobile Moto E w/5.1 (xt1526) because of apparent ease of ul'ing bl and rooting. True enough --
However since then I've been trying to get the device to allow use of a GSM SIM (USA/att.) Recently did it on a vzw (xt1528) no problem following instructions found here bit the xt1526 has beaten me senseless, going so far as to install cm13 in a totally illogical move. It works beautifuly, if you don't need calls or mms. Searched the crap out of the E forums with a couple of tips that did not pan out.
Anyone give me any hints /tips or even a nay as in "you dummy you can't to that!"
TIA,
Littlalex
Click to expand...
Click to collapse
Boost / sprint xt1526 are locked so that us domestic GSM Sims are not recognized. To my knowledge, no one here has yet gotten around this. I switched from a sprint branded one to a USCellular, which is fully SIM unlocked out of the box, bootloader unlockable, and supports att LTE. Using it right now with my postpaid ATT SIM
Sent from my XT1526 using Tapatalk
Thanks - That puts an end to the quest, no harm no foul -- On to the next phone!
Littlalex
dandrumheller said:
Boost / sprint xt1526 are locked so that us domestic GSM Sims are not recognized. To my knowledge, no one here has yet gotten around this. I switched from a sprint branded one to a USCellular, which is fully SIM unlocked out of the box, bootloader unlockable, and supports att LTE. Using it right now with my postpaid ATT SIM
Sent from my XT1526 using Tapatalk
Click to expand...
Click to collapse
Only thing I can think of is to flash the RADIO from a variant that isn't SIM locked and seeing if that works. It's a risky experiment tho... it could definitely brick the device in terms of ever being able to connect to a cell tower again.
Closest match is the USC 5.1 stock ROM's radio, which has the same model number XT1526, and is CDMA compatible, but that phone is also known to work on domestic GSM networks.
Double Thanks - Phone is useless to me as is so it's worth a go. Will report the results here.
Littlalex
PresidentMcCain said:
Only thing I can think of is to flash the RADIO from a variant that isn't SIM locked and seeing if that works. It's a risky experiment tho... it could definitely brick the device in terms of ever being able to connect to a cell tower again.
Closest match is the USC 5.1 stock ROM's radio, which has the same model number XT1526, and is CDMA compatible, but that phone is also known to work on domestic GSM networks.
Click to expand...
Click to collapse
littlalex said:
Double Thanks - Phone is useless to me as is so it's worth a go. Will report the results here.
Littlalex
Click to expand...
Click to collapse
Thanks for trying. I hope it works!
littlalex said:
Double Thanks - Phone is useless to me as is so it's worth a go. Will report the results here.
Littlalex
Click to expand...
Click to collapse
Good luck! There was some discussion, in the CDMA development subforum iirc, about this a couple months ago.
Sent from my XT1526 using Tapatalk
I fell in the same trap, but you can still make the phone useful if you sign up for freedom pop or ringplus, i plan on keeping the phone as a backup and getting the N5X next week.
mykenyc said:
I fell in the same trap, but you can still make the phone useful if you sign up for freedom pop or ringplus, i plan on keeping the phone as a backup and getting the N5X next week.
Click to expand...
Click to collapse
Yeah, I've got ring plus on mine with the totally free plan. Nice to have a CDMA emergency phone when my primary carrier is GSM.
Sent from my XT1526 using Tapatalk
Weird - I installed the complete USC 5.1 stock ROM - Everything seems to work fine, but the system version and the broadband version coming up as Sprint. US cellular is not a Sprint MVNO I don't think, but it seems to be kind of a hybrid in terms of networks? No option for switching the network to GSM/LTE in the settings that I can find.
Not sure what I'm going to try next...
Littlalex
PresidentMcCain said:
Only thing I can think of is to flash the RADIO from a variant that isn't SIM locked and seeing if that works. It's a risky experiment tho... it could definitely brick the device in terms of ever being able to connect to a cell tower again.
Closest match is the USC 5.1 stock ROM's radio, which has the same model number XT1526, and is CDMA compatible, but that phone is also known to work on domestic GSM networks.
Click to expand...
Click to collapse
littlalex said:
Weird - I installed the complete USC 5.1 stock ROM - Everything seems to work fine, but the system version and the broadband version coming up as Sprint. US cellular is not a Sprint MVNO I don't think, but it seems to be kind of a hybrid in terms of networks? No option for switching the network to GSM/LTE in the settings that I can find.
Not sure what I'm going to try next...
Littlalex
Click to expand...
Click to collapse
Did you flash the Radio/Modem too? If not, that's why the baseband comes up as Sprint.
Dial *#*#4636#*#*, phone info, change "CDMA/LTE" to "LTE/GSM/CDMA auto (PRL)". If you can't do that, follow the 5.1 instructions here: http://forum.xda-developers.com/moto-e-2015/general/how-to-verizon-moto-e-2015-gsm-network-t3098953 (change the 9 to a 10 for LTE/GSM/CDMA)
This will allow you to change the phone to LTE/GSM/CDMA mode.
Isn't the NON-HLOS.bin file the modem file? I did the keyboard commands and got the phone info and was able to change it but it didn't change anything, live or after a reboot - same thing. did the adb shell commands and the same
thing, cellular network settings grayed out. I put back the sprint SIM that came with the kit and it was fine and the network settings are available...hmmmm.
I greatly appreciate the suggestions. I'm gonna leave the battlefield and get dinner or my wife will call me mean geeky names
PresidentMcCain said:
Did you flash the Radio/Modem too? If not, that's why the baseband comes up as Sprint.
Dial *#*#4636#*#*, phone info, change "CDMA/LTE" to "LTE/GSM/CDMA auto (PRL)". If you can't do that, follow the 5.1 instructions here: http://forum.xda-developers.com/moto-e-2015/general/how-to-verizon-moto-e-2015-gsm-network-t3098953 (change the 9 to a 10 for LTE/GSM/CDMA)
This will allow you to change the phone to LTE/GSM/CDMA mode.
Click to expand...
Click to collapse
Putting this thread to rest
Spent the last couple of days flashing the E with rom after rom, particularly of GSM phones, ATT, TM, etc and their respective radio files. And not to my surprise the phone works fine with every one of then regardless of model XTxxxx anything, phone runs flawless, except for the network of course, which always remains Sprint.
I have to conclude, unless someone can prove otherwise, that the phone network part is either embedded in the chipset as hardware or a combination of hardware and software, or the modem files are somehow protected from being overwritten.
Was interesting and educational.
Thanks to those who gave ideas or suggestions, especially you Mr. President
Littlalex
littlalex said:
Weird - I installed the complete USC 5.1 stock ROM - Everything seems to work fine, but the system version and the broadband version coming up as Sprint. US cellular is not a Sprint MVNO I don't think, but it seems to be kind of a hybrid in terms of networks? No option for switching the network to GSM/LTE in the settings that I can find.
Not sure what I'm going to try next...
Littlalex
Click to expand...
Click to collapse
dandrumheller said:
Boost / sprint xt1526 are locked so that us domestic GSM Sims are not recognized. To my knowledge, no one here has yet gotten around this. I switched from a sprint branded one to a USCellular, which is fully SIM unlocked out of the box, bootloader unlockable, and supports att LTE. Using it right now with my postpaid ATT SIM
Sent from my XT1526 using Tapatalk
Click to expand...
Click to collapse
PresidentMcCain said:
Did you flash the Radio/Modem too? If not, that's why the baseband comes up as Sprint.
Dial *#*#4636#*#*, phone info, change "CDMA/LTE" to "LTE/GSM/CDMA auto (PRL)". If you can't do that, follow the 5.1 instructions here: http://forum.xda-developers.com/moto-e-2015/general/how-to-verizon-moto-e-2015-gsm-network-t3098953 (change the 9 to a 10 for LTE/GSM/CDMA)
This will allow you to change the phone to LTE/GSM/CDMA mode.
Click to expand...
Click to collapse
Ok –*question. If I put Cyanogenmod 13 (Lollipop) onto the Moto E 1526 (U.S. Cellular version) –*will GSM work on it? I need to buy my grandma a GSM phone who doesn't live in the States & I want the GSM card to be easy plug in play for her.
I know that the U.S. Cellular version is the best because it is unlocked for GSM as well, but I believe XT1526's default radio is CDMA.
Maybe I should get a GSM sim card here in the States and switch it to GSM on CM13 (if this is possible) –*that way all my grandmother has to do is put the sim card in without any hassle.
theshiz89 said:
Ok –*question. If I put Cyanogenmod 13 (Lollipop) onto the Moto E 1526 (U.S. Cellular version) –*will GSM work on it? I need to buy my grandma a GSM phone who doesn't live in the States & I want the GSM card to be easy plug in play for her.
I know that the U.S. Cellular version is the best because it is unlocked for GSM as well, but I believe XT1526's default radio is CDMA.
Maybe I should get a GSM sim card here in the States and switch it to GSM on CM13 (if this is possible) –*that way all my grandmother has to do is put the sim card in without any hassle.
Click to expand...
Click to collapse
The device does do funky things with the radio on first boot on a new rom. I've run several CM based marshmallow roms. There's no real issue, but you need to go through the non-adb method (using the network app) to get GSM working on every new clean flash. Typically this means pulling the GSM SIM before initial boot (when I don't, the radio keeps cycling through modes making initial setup very difficult), do setup on Wi-Fi, turn off radio, insert SIM, then do the process.
I definitely would not give the device to a non tech savvy person before doing this on a clean flash. Once it's done, you can remove and reinsert Sims without issue.
Sent from my XT1526 using Tapatalk
dandrumheller said:
you need to go through the non-adb method (using the network app) to get GSM working on every new clean flash. Typically this means pulling the GSM SIM before initial boot (when I don't, the radio keeps cycling through modes making initial setup very difficult), do setup on Wi-Fi, turn off radio, insert SIM, then do the process.
I definitely would not give the device to a non tech savvy person before doing this on a clean flash. Once it's done, you can remove and reinsert Sims without issue.
Sent from my XT1526 using Tapatalk
Click to expand...
Click to collapse
Thanks for the info and advice. Much appreciated.
Btw, when you say turn off radio –*you mean by using network app right? And you'r ereferring to these instructions from: http://forum.xda-developers.com/moto-e-2015/general/help-confirm-5-1-how-to-verizon-moto-e-t3264258 ?: "Switch Sims
switch to settings -> cellular networks
Pull down notifications-> Airplane mode ON
Network App -> GSM / LTE (close app)
switch to settings
verify 4g (I always click on it, still shows CDMA)
NEtwrok app -> Turn on Radio
Settings -> click on CDMA -> Select 4G
Airplane Mode OFF"
theshiz89 said:
Thanks for the info and advice. Much appreciated.
Btw, when you say turn off radio –*you mean by using network app right? And you'r ereferring to these instructions from: http://forum.xda-developers.com/moto-e-2015/general/help-confirm-5-1-how-to-verizon-moto-e-t3264258 ?: "Switch Sims
switch to settings -> cellular networks
Pull down notifications-> Airplane mode ON
Network App -> GSM / LTE (close app)
switch to settings
verify 4g (I always click on it, still shows CDMA)
NEtwrok app -> Turn on Radio
Settings -> click on CDMA -> Select 4G
Airplane Mode OFF"
Click to expand...
Click to collapse
Yep, you got it. Actually, I don't think it's too picky about the order of operations as described in that thread - I've done this many times without referring to the thread so have likely done it "wrong" at times, and it still works. Basically, radio off (either via airplane mode or network app), switch modes, radio back on.
Just don't clean flash a rom without either access to Wi-Fi, or a locally installable copy of the network app.
Sent from my XT1526 using Tapatalk
Hey .. i am in Karachi Pakistan ...
i have seen this phone workingperfectly with gsm network until someone makes a factory Data reset ..
still not found out the solution ..
the devices arrived from china in working condition ..
FYI - US Cellular was bought out by sprint last year, so they are now a sprint mvno.
Did you try flashing the stock 6.0 ROM?
Related
I was at at&t and we where unable to activate the phone even though the phone is capable. At&t said everything was good on there end but the phone just wont get a signal but it says it is on at&t.
Does anybody have any ideas how to fix this?
Have u unlocked the sim slot on the phone?
swangotp said:
I was at at&t and we where unable to activate the phone even though the phone is capable. At&t said everything was good on there end but the phone just wont get a signal but it says it is on at&t.
Does anybody have any ideas how to fix this?
Click to expand...
Click to collapse
Quite a few people (including myself) on various boards have acknowledged having this problem as well. I got the SIM unlock code from Verizon but when I do a GSM network scan, nothing is detected. I know it has been escalated above level 2 support at Motorola and hopefully they will address it shortly. Here's another thread about it over on droidforums: http://www.droidforums.net/forum/droid-2-global/96596-droid-2-global-unlock-foreign-sim.html
Yes, I have unlocked the phone from the code verizon gave me.
I hope its a fixable problem. But I noticed when I use an active tmob sim the phone doesnt even say tmobile. But when I use an at&t sim it atleasts says at&t.
I'm very interested (as I'm sure many others are) in a resolution to this. OP did you call VZW global support and let them know you're having this problem? Hopefully the more they hear about it, the faster they'll have a fix
SGMD1 said:
I'm very interested (as I'm sure many others are) in a resolution to this. OP did you call VZW global support and let them know you're having this problem? Hopefully the more they hear about it, the faster they'll have a fix
Click to expand...
Click to collapse
They where no help at all they said it was for foreign sim cards only and that at&t and tmobile where not supported. But they did say verizon was better than both of them combined.
If you feel like experimenting try this:
Go to dialpad, and enter *#*#4636#*#*
Click on Phone Information, and then scroll down to bottom. Set preferred network type from "CDMA auto(PRL)" to "WCDMA preferred" and see if that kicks it on ATT.
I'm 99.9% sure after looking through the user guide that VZW has restricted use of the 850/1900 MHz GSM/UMTS bands, even though the device has the hardware to support them. Most foreign networks use 900/1800 GSM and 2100 UMTS but AT&T/T-Mobile use 850/1900, which is why no one has had any success with them yet.
Hopefully someone can figure out a workaround.
EDIT: Just a US GSM restriction...looks like 850/1900 work abroad: http://www.droidforums.net/forum/dr...d2-global-south-america-first-impression.html
IslesFan said:
If you feel like experimenting try this:
Go to dialpad, and enter *#*#4636#*#*
Click on Phone Information, and then scroll down to bottom. Set preferred network type from "CDMA auto(PRL)" to "WCDMA preferred" and see if that kicks it on ATT.
Click to expand...
Click to collapse
These where the results I got, so clearly it is getting seeing the network. Just not connecting.
Just got off the phone with Motorola and they said the droid 2 global was only for verizon sim cards and when I told them about the unlock code the guy didn't know what they where for. So another dead end. Another theory I have is that the stock verizon rom is blocking at&t so maybe if someone can flash another rom we can see if this is the problem.
Further proof the 850/1900 bands are locked: https://motorola-global-portal.custhelp.com/app/answers/detail/a_id/57058/p/30,6720,7706
"GSM-based global services work only with a SIM card supplied by Verizon Wireless® or by another GSM 900 or GSM 1800 service provider. When you set your phone to use a GSM 900 or GSM 1800 network you may be prompted to enter a subsidy code. To get this code, contact Verizon Wireless."
EDIT: Looks like they're just locked in the US, not abroad: http://www.droidforums.net/forum/dr...d2-global-south-america-first-impression.html
SGMD1 said:
Further proof the 850/1900 bands are locked: https://motorola-global-portal.custhelp.com/app/answers/detail/a_id/57058/p/30,6720,7706
"GSM-based global services work only with a SIM card supplied by Verizon Wireless® or by another GSM 900 or GSM 1800 service provider. When you set your phone to use a GSM 900 or GSM 1800 network you may be prompted to enter a subsidy code. To get this code, contact Verizon Wireless."
Click to expand...
Click to collapse
If this is true why would they say it has the 850 and 1900 bands? I know its not a hardware problem, so if its a software problem there is a chance we can have a workaround. Or the locked bands might be because of the verizon rom.
I was able to put a new rom on my Droid 2 Global and although the rom was working since it was for a droid 2 the radio was not working properly. I was not able to force turn it on. I still have several more things I will try tonight.
swangotp said:
I was able to put a new rom on my Droid 2 Global and although the rom was working since it was for a droid 2 the radio was not working properly. I was not able to force turn it on. I still have several more things I will try tonight.
Click to expand...
Click to collapse
Keep us posted!
This has been done before on Windows Mobile phones (CDMA HTC Touch Pro 2) and requires a radio reflash since the bands are locked in the radio firmware. I am hoping they will develop a solution for Android phones. http://rhodiumw.htc-unlocks.com/
Being that this the 1st CDMA/GSM (Tie if you count Droid Pro) Android device I would wait and see.
firebrain said:
This has been done before on Windows Mobile phones (CDMA HTC Touch Pro 2) and requires a radio reflash since the bands are locked in the radio firmware. I am hoping they will develop a solution for Android phones. http://rhodiumw.htc-unlocks.com/
Being that this the 1st CDMA/GSM (Tie if you count Droid Pro) Android device I would wait and see.
Click to expand...
Click to collapse
Good info, thanks
As from what I learned from previous devices the Droid 2 Global Verizon has a security locked radio. I have seen people unlock the radios from windows mobile phones, it is as easy as installing a .zip file that will unlock the security. I believe it is the same way with the Droid 2 Global. I will try to get this working but I don’t have much knowledge in the development field. But I do know you will have to be rooted. I have also spoke with a friend at Verizon, which claims that they did indeed lock the radios and there is a workaround. He said he was not familiar with this workaround but said it was close to the problem with the windows mobile security locked devices. I am calling this the official reason the phone wont work with US networks. This makes sense, and now that we found the problem it shouldn’t be long before we find a way around it.
Thanks for the info swangotp...that definitely sounds promising. Keep us posted!
subscribing to this thread... I know this is possible.
Been running CM 10.2 nightlies for a few weeks and everything has been smooth except the phone is stuck on 3g. If I go into mobile networks and network mode it was set to "CDMA + LTE/EvDo". Tried "Global" and still the same thing. The only way I can get it to work is if I choose "LTE" (and I did confirm it was running at full LTE speeds) which then makes calling impossible.
Not sure what to do, have played around with APN's but haven't found anything that works yet.
Also, tried updating to the latest radio and that didn't help.
Any ideas?
Follow my thread . I just went through the same thing. Short answer: new sim card
http://forum.xda-developers.com/showthread.php?t=2551181
Can't keep 4g/LTE and voice calls at the same time
Sent from my XT907 using Tapatalk
I saw your thread but I don't understand how I would be able to get LTE service (through forcing by selecting LTE only) if my SIM card was somehow fried. You would think if it was a bad SIM it would be more than just that. Also, both our cards "failing" in the same way.
I do remember dialing *228 a while back as I was having some connection issues but can't remember if I saw LTE before doing that. Almost think its Verizon's way of sticking it to those that unlock and flash roms (when you *228 you have to come replace your sim and get "outed").
atison said:
I saw your thread but I don't understand how I would be able to get LTE service (through forcing by selecting LTE only) if my SIM card was somehow fried. You would think if it was a bad SIM it would be more than just that. Also, both our cards "failing" in the same way.
I do remember dialing *228 a while back as I was having some connection issues but can't remember if I saw LTE before doing that. Almost think its Verizon's way of sticking it to those that unlock and flash roms (when you *228 you have to come replace your sim and get "outed").
Click to expand...
Click to collapse
One possibility is if you ever messed with *#*#4636#*#* & did anything to 3 dot menu band, you can have a hosed radio partition. Rsd restore is only fix.
Vzw does indeed want us not rooted as (edit)a lot rooted users cause them BIG headaches.
atison said:
I saw your thread but I don't understand how I would be able to get LTE service (through forcing by selecting LTE only) if my SIM card was somehow fried. You would think if it was a bad SIM it would be more than just that. Also, both our cards "failing" in the same way.
I do remember dialing *228 a while back as I was having some connection issues but can't remember if I saw LTE before doing that. Almost think its Verizon's way of sticking it to those that unlock and flash roms (when you *228 you have to come replace your sim and get "outed").
Click to expand...
Click to collapse
Read through the whole thread. You may find some similarities and answers.
Sent from my XT907 using Tapatalk
atison said:
I saw your thread but I don't understand how I would be able to get LTE service (through forcing by selecting LTE only) if my SIM card was somehow fried. You would think if it was a bad SIM it would be more than just that. Also, both our cards "failing" in the same way.
I do remember dialing *228 a while back as I was having some connection issues but can't remember if I saw LTE before doing that. Almost think its Verizon's way of sticking it to those that unlock and flash roms (when you *228 you have to come replace your sim and get "outed").
Click to expand...
Click to collapse
When my sim went from 4g on boot to 3g in 2 min, I just called & they mailed me one.
just ordered a new sim (NFC sim). We will see if this fixes it.
Thought I'd post my experience on here just because I know a lot of us are switching over and I must have gone through fifteen different threads to figure out how to get my data, talk, and text working. To start off I bought a T-Mobile nano sim and just plugged it straight into my droid thinking it would all be gravy...nope. This is exactly what I had to do: First, go into your mobile network settings and change to LTE/UTMS/GSM. Second, change your (Select Network) to GSM only. Third, create an APN that is as follows: NAME;T-Mobile, APN; epc. tmobile. com, MMSC; ht tp:// mms . msg. eng. t-mobile . com/mms/wapenc . APN Type; default, mms, supl APN Protocol; ip4/ip6. LEave everything else alone. trust me this is the most reliable way to go about doing the switch over and the data is fast, plenty fast. The phone info . apk app does work but for the ultra its not needed so don't worry with it. HAPPY SAVINGS all you DROID LOVERS.
Thanks for the help. I have unlimited Verizon with my bootloader unlocked, but I have issues with good service here where I live and work with Verizon. T-mobile may be better, so I am considering trying it out soon. I am going to test TMO for 7 days with their free program and see. If it works, I may just follow these directions and use my Droid Maxx.
Jeff
How ur work on gsm? If I out mines on gsm internet won't work. Umts is the only way mines work. I get h+ but at times its slow. Worst playing games
P.s am on metro PCs same crap lol T-Mobile all my settings r from T-Mobile
Sent from my XT1080 using XDA Free mobile app
I picked up a Droid Maxx XT1080M (Not the ultra, but they seem so.. similar....) which was unlocked.
I popped a NanoSIM into it, rebooted, and it took a minute but the device figured out to auto switch to the GSM/UMTS/LTE side of the baseband. After that the only thing I needed to do was add the T-Mobile LTE APN.
I'd check your APN and make sure it's on fast.t-mobile.com. From what I've noticed is that when I boot it up, and WIFI is off, if I am to start browsing it goes from E (edge) to H (HSPA) to LTE in about ... 2-3 minutes of browsing/using data. Then it sticks on LTE. This is not always the case as I've rebooted a few times tonight without it bumping down to EDGE.
Getting 43mbps down and 33 mbps up on LTE, and 6down/2up on UMTS/HSPA. In Seattle... This device hits the sweet spots for T-Mobile LTE bands with 1700/2100. We'll miss out on their 1900 build-out, but should still have HSPA+ on those other bands anyway.
One odd message I get after every reboot is The SIM card is from an unknown source. does not seem to affect anything. Anyone know if this is normal? I've not seen this error before on other unlocked devices.
I am on metro, I don't have that issues at all. I pop in Sim, did a apn n wallah 4g LTE n every work fine took me a hot minute to figure out how to get LTE to work.
The Sim car error is Cuz its a Verizon fone. It doesn't effect the fone at all. Once we get root n we get to flash I know we won't c that no more.
Sent from my XT1080 using XDA Free mobile app
Sadly, my phone seems to have a borked radio.
What happened? So I popped in T-Mobile SIM card, and calling and texting is a charm. (Except for the Unknown SIM issue, of course.) I then found out that I was getting NO data after a factory reset. So then I looked to downgrade OS version, blah blah, flashed radio, did fastboot config carrier, so on and so forth. No joy. Sigh...
EDIT: Just realized I revived the topic...
mr_verystock said:
Sadly, my phone seems to have a borked radio.
What happened? So I popped in T-Mobile SIM card, and calling and texting is a charm. (Except for the Unknown SIM issue, of course.) I then found out that I was getting NO data after a factory reset. So then I looked to downgrade OS version, blah blah, flashed radio, did fastboot config carrier, so on and so forth. No joy. Sigh...
EDIT: Just realized I revived the topic...
Click to expand...
Click to collapse
Verizon has changed something in the system part of the most recent ROMs to prevent t-mobile use. I had the same issues. For some, I could bypass the block by removing some of the CDMA references in build.prop. For the most recent Verizon ROM, nothing I tried worked.
Luckily, I am unlocked. Moved originally to a ported Moto X ROM, and then to CM12, and everything works fine there.
That's odd, I'm on the latest build and have 0 issues with Tmobile.
I just plugged my T-Mobile nano sim in last night and used the instructions on this thread and a few others around the internet to get T-Mobile 4GLTE or HSPA+ to work. I can text, make calls, and I get all the Edge (shown as an "E") data i want, but It is way to slow to be useful. I have tried it on both my droid maxx phones (one 2013 - 32gb, and one 2014 - 16gb). Both are on latest system version 24.3.7. Any other advice to make data work decent? I can get NO 4G or HSPA+
Does tmo say you have wcdma or LTE access where you are.
I am having the same issues after FDR and data wouldn't work anymore. In my area I am LTE so the droid ultra that worked well in the last 4 months on T-Mobile, I think it is a software problem.
Yes it is software problem. If you can get your phone rooted and bootloader unlocked then reflash the rom it works perfectly. I get LTE on tmobile on the CM rom no problem.
I run LTE just fine.. All I needed to do was add T-Mobiles APN to my phone..
Sent from my XT1080
I also left it on "Global"
Sent from my XT1080
Hi everyone,
I've been a lurker of this site for a little while now, so thank you all for your productivity and guides (If I can get this to work, I will create a guide myself to share ) I recently purchased a Brand New Sprint Galaxy S5 (SM-G900P) with the hopes of unlocking it and using it on Straight Talk AT&T's network. I've made incredible progress so far, but I feel like I'm missing something. Up to this point I've spent countless hours online reading about this device and troubleshooting it.
Current Issue: Phone will not contact any GSM network. I have the sim card in and it just says no service. I know this is only on GSM networks because I disabled all CDMA bands using DFS. All AT&T bands are active and I believe the Galaxy S5 supports almost every band available. APN Settings are set correctly.
Things I have done / tried:
Using Cyanogenmod13 KLTE ROM, Cyanogenmod12.1 SPR ROM, Unofficial CM13 SPR ROM. Also, tried using a "stock?" 4.4.4 ROM that was a little glitchy, but worked nonetheless (tried using SSU.apk here, but afterwards it seemed to sim-lock my phone by giving "Invalid SIM"
Phone unlocked with IDoneApps (no more invalid sim) IDoneApps says its for International and Domestic.
I paid for a Network Access Code and registered the phone with Straight Talk and attempted to transfer the service over (not sure if this is necessary as I am using a GSM SIM, which still works fine in my other phone, perfect service)
Also, on the stock ROM it keeps trying to "Activate the device" and won't be able to. Sometimes the phone goes into roaming and when I call it sends me to Verizon Wireless Customer Service (not sure why on this)
Phone will receive service fine when set to Automatic or CDMA LTE. If I attempt to call a phone I will get "Your account is not authorized to make calls to this phone number" with a mans voice.
-Do I need to do something with Sprint to go forward?
SOLVED IT:
Had to enable the "GCF Setting" on the phone.
YouTube Video: "How to enbale GFC settings on any Samsung Galaxy " - This guide worked flawlessly.
Now all I need to do in order to have perfect service on this SM-G900P on AT&T is to enable the rest of the AT&T LTE Bands on it.
Hey, I know this is necro'ing but I hope you are still around.....
I'm in the same situation as this post right now...I have have a SM-G900P (Sprint Galaxy S5), now activated through Straight Talk, but my data doesn't work when using CM13. I was wondering more what you mean by your GCF settings and maybe some quick tips to get 4G/LTE while on CM (Preferably 13+). Stock Rom I get LTE just fine, but for some reason it gives me this *FUGLY* Creedo mvno app suite when I do a fresh restore of stock rom, and just the whole touchwhiz thing sucks in general. I'd much prefer CM or any other custom ROM that cuts out the BS but gives me data.
Phweak said:
Hey, I know this is necro'ing but I hope you are still around.....
I'm in the same situation as this post right now...I have have a SM-G900P (Sprint Galaxy S5), now activated through Straight Talk, but my data doesn't work when using CM13. I was wondering more what you mean by your GCF settings and maybe some quick tips to get 4G/LTE while on CM (Preferably 13+). Stock Rom I get LTE just fine, but for some reason it gives me this *FUGLY* Creedo mvno app suite when I do a fresh restore of stock rom, and just the whole touchwhiz thing sucks in general. I'd much prefer CM or any other custom ROM that cuts out the BS but gives me data.
Click to expand...
Click to collapse
no worries about necro'ing a thread, im not sure why some folks get bent out of shape about it :/ anyways, what service provider are you using via straight talk? they use all of the major 4 (vzw, at&t, tmob and sprint)
the basic answer to your question is APN settings. did you ever have data working with str8 talk? if so, your gcf settings dont need to be fiddled with, if not, then you have some tinkering to do. not at all difficult really, just some button presses
youdoofus said:
no worries about necro'ing a thread, im not sure why some folks get bent out of shape about it :/ anyways, what service provider are you using via straight talk? they use all of the major 4 (vzw, at&t, tmob and sprint)
Click to expand...
Click to collapse
Well, the only band that identifies when I actually have a working data connection (tops I get is 3G) says Sprint. So I think that's who they're routing me through. I'm not a total rookie when it comes to this, but I don't know how to change the radio bands outside of what apps like Radio Switcher do (which actually just gives me a short cut to quasi-service mode settings in CM).
I get the cell data to read LTE on stock, but it's gross touchwiz and it never seems to get GOOD signal, two bars of LTE was the most in Milwuakee suburbs, an area I'd assume would be swimming in 4G/LTE. I'd much rather use CM for the customization (or any more "purer" android ROMS). If I select CMDA auto PRL I get a solid 3G and all voice/text/data services work. But any other option that includes LTE drops my data entirely.
Edit: I just realized I repeated myself lol. I've made a few posts on various forums about this. Kind of forgotten what info I've provided where. Sorry for the redundancy.
Phweak said:
Well, the only band that identifies when I actually have a working data connection (tops I get is 3G) says Sprint. So I think that's who they're routing me through. I'm not a total rookie when it comes to this, but I don't know how to change the radio bands outside of what apps like Radio Switcher do (which actually just gives me a short cut to quasi-service mode settings in CM).
I get the cell data to read LTE on stock, but it's gross touchwiz and it never seems to get GOOD signal, two bars of LTE was the most in Milwuakee suburbs, an area I'd assume would be swimming in 4G/LTE. I'd much rather use CM for the customization (or any more "purer" android ROMS). If I select CMDA auto PRL I get a solid 3G and all voice/text/data services work. But any other option that includes LTE drops my data entirely.
Edit: I just realized I repeated myself lol. I've made a few posts on various forums about this. Kind of forgotten what info I've provided where. Sorry for the redundancy.
Click to expand...
Click to collapse
i dont have any experience with the sprint flavor of straight talk service, but it should be on the same LTE bands as normal sprint. shouldnt have to monkey with anything tho. ill have to look more when i get home
Phweak said:
Well, the only band that identifies when I actually have a working data connection (tops I get is 3G) says Sprint. So I think that's who they're routing me through. I'm not a total rookie when it comes to this, but I don't know how to change the radio bands outside of what apps like Radio Switcher do (which actually just gives me a short cut to quasi-service mode settings in CM).
I get the cell data to read LTE on stock, but it's gross touchwiz and it never seems to get GOOD signal, two bars of LTE was the most in Milwuakee suburbs, an area I'd assume would be swimming in 4G/LTE. I'd much rather use CM for the customization (or any more "purer" android ROMS). If I select CMDA auto PRL I get a solid 3G and all voice/text/data services work. But any other option that includes LTE drops my data entirely.
Edit: I just realized I repeated myself lol. I've made a few posts on various forums about this. Kind of forgotten what info I've provided where. Sorry for the redundancy.
Click to expand...
Click to collapse
Ok, I reread your op and it said that you're using at&t. Are you sim unlocked? If not, Mr @stifilz, do you think you could hook this guy up? He has a proven track record of unlocking S5s
Just a heads up I'm not OP, that's @aventurer. I just happened to find a very similar situation. Probably changes your train of thought but for what it's worth in my situation, the phone sim came from Sprint originally, and the Straight Talk people said they use that sim to connect to the LTE bands.
Hi, i recently buy an used nexus 4 in ebay, simply for nostalgia, so, i´m in Mexico, the nexus 4 that i had 3 year ago, was unlocked, so, i supose this too, when arrive, i connect to wifi immediately without any sim inside, the cellphone request for one upgrade, i accept, after that, i put my sim from Virgin Mobile and the nexus only showed " no simcard inside, only emergency calls.... y try with other carrier, weex mexico (virgin and weex work in Movistar, they are OMV) and the same all.... finally y put a sim from at&t mexico, nothing... with the sim (att) inside, i downgrade to android 4.4.4, when woke up, the nexus 4 with the same result, No simcard, so, the cellphone wasn´t detecting any simcard, after that, it request for the next upgrade, lollipop 5.0.1 that i accept, but in this chance, the nexus with the simcard from ATT showing signal¡¡¡¡¡ the cellphone was working at 100%, i made a couple calls, without problems.
But, i try with the other 2 simcards, and it doesnt detecting, simply show again No simcard, emergency only, so i switch back my Att sim and this is detecting without problems....
I install a rom named Pure Nexus, waiting for work, but the same, only with ATT simcard work, so i downgrade again to 4.4.4 but in this chance with other simcard differnt from AT&T, Virgin mobile.... but nothing, nexus 4 is not detecting any other simcard than at&t¡¡¡¡¡¡
What can i try? could be a nexus 4 locked only for one carrier or what? in google dont appear in blacklist, the imei is good nor corrupted... could be the sim holding?
try going back to stock using the nexus 4 toolkit,then root, and try one of the hybrid models LTE enabler or download the 107-3, if that doesnt work also, then it might be defective.
Zestar said:
try going back to stock using the nexus 4 toolkit,then root, and try one of the hybrid models LTE enabler or download the 107-3, if that doesnt work also, then it might be defective.
Click to expand...
Click to collapse
excuse me, what is "download the 107-3" ? its a rom? i download 4.4.4 from google,
nismo87 said:
excuse me, what is "download the 107-3" ? its a rom? i download 4.4.4 from google,
Click to expand...
Click to collapse
use this to go back to stock
http://www.wugfresh.com/nrt/
you will get android 5.1.1, you can also install custom recovery and root using it.
then if the sims doesnt work, change the modem using the LTE Enabler you can get it from the Play Store.
it has the modem until version 104-33, but im using another one the 107-33 that i got from
https://drive.google.com/open?id=0B77BTW0zStYCZmpPR0xTaWE5OUU
104 33 and 107 33 are hybrid modems, but you can also install stock modems,
the modem is the one that allows you to make calls and use the data channel in your phone
hope that makes sense, let me know how it goes. regards.
Zestar said:
use this to go back to stock
http://www.wugfresh.com/nrt/
you will get android 5.1.1, you can also install custom recovery and root using it.
then if the sims doesnt work, change the modem using the LTE Enabler you can get it from the Play Store.
it has the modem until version 104-33, but im using another one the 107-33 that i got from
https://drive.google.com/open?id=0B77BTW0zStYCZmpPR0xTaWE5OUU
104 33 and 107 33 are hybrid modems, but you can also install stock modems,
the modem is the one that allows you to make calls and use the data channel in your phone
hope that makes sense, let me know how it goes. regards.
Click to expand...
Click to collapse
well, i flash EnableNexus4LTE.zip and LTEhybrid33-84 without good news, i have the same issue, only at&t mexico sim is detected and the others no, well, i´m now with 4G LTE but only working in at&t
i don´t know what other things trying in the nexus, seem like only prefer at&t sim and no one else.
Adding information, i have sims from cricket USA and t-mobile USA, i know is not supported in México, but it will be for try to get something like: Sim not activated... or invalid sim, but other different from my nightmare: NO sim, please insert....
SOLVE:
I´ll auto answer... after a lot off attempts, i found the problem is the sim reader, like i posted before, only working with at&t Mexico sim, so, I watch the thickness of this was little bit smaller than others, my "strategy" was try to imitate the fact that at&t sim is making contact gently on pins, i take a 3in1 simcard, and i put the nano sim in micro sim adapter (included in the sim) but not in all (i don know exactly the words in english), so by this waya the nano sim standing on a little bit from microsim adapter.
when i insert the sim by this way an my nexus, and turn on, the cellphone recognize inmediatly the sim, so i found the key of this problem, like i said, the problem here is the sim reader, because, a normal and good sim reader not need this tricks to get signal.......
nismo87 said:
SOLVE:
I´ll auto answer... after a lot off attempts, i found the problem is the sim reader, like i posted before, only working with at&t Mexico sim, so, I watch the thickness of this was little bit smaller than others, my "strategy" was try to imitate the fact that at&t sim is making contact gently on pins, i take a 3in1 simcard, and i put the nano sim in micro sim adapter (included in the sim) but not in all (i don know exactly the words in english), so by this waya the nano sim standing on a little bit from microsim adapter.
when i insert the sim by this way an my nexus, and turn on, the cellphone recognize inmediatly the sim, so i found the key of this problem, like i said, the problem here is the sim reader, because, a normal and good sim reader not need this tricks to get signal.......
Click to expand...
Click to collapse
I glad its working now, you can stay on 5.1.1 with the hybrid modem if you got the 4G signal, or return to 4.4.4 if you want. regards.
Zestar said:
I glad its working now, you can stay on 5.1.1 with the hybrid modem if you got the 4G signal, or return to 4.4.4 if you want. regards.
Click to expand...
Click to collapse
yeah¡¡¡, i´ll install a hybrid modem, but the 4G is simulated or real with this?
nismo87 said:
yeah¡¡¡, i´ll install a hybrid modem, but the 4G is simulated or real with this?
Click to expand...
Click to collapse
i think is real, speedtest results are much better using 4G. I got around 40mbps.
Zestar said:
i think is real, speedtest results are much better using 4G. I got around 40mbps.
Click to expand...
Click to collapse
i just sintall LTEhybrid33-84 and EnableNexus4LTE with TWRP custome recovery, but apparently without any 4G signal, in the menu mobile networks only i can choose 2G & 3G.... but the baseband does change.....
so, i use the trick hidden menu with *#*#4636#*#* and i choose LTE only, only with this my nexus 4 has 4G signal¡¡¡¡¡¡ but, if i come back to mobile networks, again only i can see 2g and 3g and the little 4G on top disappear.... so i need to come back again to hidden menu....
conclusion, mobile networks menu it will prohibited for me :silly:
nismo87 said:
i just sintall LTEhybrid33-84 and EnableNexus4LTE with TWRP custome recovery, but apparently without any 4G signal, in the menu mobile networks only i can choose 2G & 3G.... but the baseband does change.....
so, i use the trick hidden menu with *#*#4636#*#* and i choose LTE only, only with this my nexus 4 has 4G signal¡¡¡¡¡¡ but, if i come back to mobile networks, again only i can see 2g and 3g and the little 4G on top disappear.... so i need to come back again to hidden menu....
conclusion, mobile networks menu it will prohibited for me :silly:
Click to expand...
Click to collapse
you should be able to select "LTE/GSM Auto" that way the phone will switch to GSM when needed.
and the option is only visible under *#*#4636#*#* menu, also, we have to switch to LTE/GSM auto, if the phone is restarted. there is a way to make it persistent, but I haven't tried. i'm fine with it since i don't restart the phone too often.
hope this helps, regards.