[ROM][6.0.1] Temasek V5.2 for YU YUNIQUE - Yu Yunique ROMs, Kernels, Recoveries, & Other Deve

Code:
* Your warranty is now void.
* I am not responsible for bricked devices, dead SD Cards, thermonuclear war, or you getting fired because the alarm app failed.
* Please do some research if you have any concerns about this guide before following it!
* YOU are choosing to make these modifications.
* And if you point the finger at me for messing up your device, I will laugh at you.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
XDA:DevDB Information
[ROM][6.0.1] Temasek V5.2 for YU YUNIQUE, ROM for all devices (see above for details)
Downloads
Build
Build 2
GAPPS
What Works? new
Booting!
Display
Touchscreen
Wi-Fi
Bluetooth
Storage
Camera
Brightness
Audio
RIL
What Doesn't Work?
You tell
Installation
Boot into Recovery TWRP-3.0.0-0
Go to twrp> then wipe> then advance wipe>
Then click on data and click on change file partition > ext4
Then click on cache >change file partition > ext4
Then wipe dalvik cache,cache,data,system
Then flash rom then gaaps arm 6.0
Done
Features
Marshmallow 6.0.1_r22
Floating Windows
Statusbar Customizations
Clock Alignment
Battery Settings
Charging animations
Dotted circle battery settings
Battery colours
Battery bar
Statusbar greeting
Network Traffic
Statusbar Brightness control
Breathing Notifications
Quick Pull down
Smart Pull down
Quick Settings Management
DPI Settings
Live Display
Smart cover options
Lockscreen weather
Lockscreen colours
Middle and bottom shortcuts
Button Settings
Navigationbar customization
Slim PIE
Gesture Anywhere
Navigation ring Targets
Animation Controls
Slim Recents
Omni Switch
Recents RAM Bar
HeadsUP Settings
App circle sidebar
Apps sidebar
many many more....
Contributors
FireLord, ashwin007 , amalappunni , @chaubeyprateek @cyanogen @temasek
Source Code: https://github.com/Fire-Qcom
Note
1. If I forgot to add someone in credits please PM me.
2. Changing file system from f2fs to ext4 will wipe your internal storage too.
ROM OS Version: 6.0.x Marshmallow
ROM Kernel: Linux 3.10.x
ROM Firmware Required: TWRP-3.0.0
Based On: CyanogenMod
Version Information
Status: Beta
Current Beta Version: 20160323
Beta Release Date: 2016-03-23
Created 2016-03-23
Last Updated 2016-03-23

reserved one

reserved two

Wow, new ROM to our beloved Yunique........ Thank u Firelord

lol
FireLord said:
Code:
* Your warranty is now void.
* I am not responsible for bricked devices, dead SD Cards, thermonuclear war, or you getting fired because the alarm app failed.
* Please do some research if you have any concerns about this guide before following it!
* YOU are choosing to make these modifications.
* And if you point the finger at me for messing up your device, I will laugh at you.
XDA:DevDB Information
[ROM][6.0.1] Temasek V5.2 for YU YUNIQUE, ROM for all devices (see above for details)
Downloads
Build
GAPPS
What Works? new
Booting!
Display
Touchscreen
Wi-Fi
Bluetooth
Storage
Camera
Brightness
Audio
RIL
What Doesn't Work?
You tell
Installation
Boot into Recovery TWRP-3.0.0-0
Go to twrp> then wipe> then advance wipe>
Then click on data and click on change file partition > ext4
Then click on cache >change file partition > ext4
Then wipe dalvik cache,cache,data,system
Then flash rom then gaaps arm 6.0
Done
Features
Marshmallow 6.0.1_r22
Floating Windows
Statusbar Customizations
Clock Alignment
Battery Settings
Charging animations
Dotted circle battery settings
Battery colours
Battery bar
Statusbar greeting
Network Traffic
Statusbar Brightness control
Breathing Notifications
Quick Pull down
Smart Pull down
Quick Settings Management
DPI Settings
Live Display
Smart cover options
Lockscreen weather
Lockscreen colours
Middle and bottom shortcuts
Button Settings
Navigationbar customization
Slim PIE
Gesture Anywhere
Navigation ring Targets
Animation Controls
Slim Recents
Omni Switch
Recents RAM Bar
HeadsUP Settings
App circle sidebar
Apps sidebar
many many more....
Contributors
FireLord, ashwin007 , amalappunni , @chaubeyprateek
Source Code: https://github.com/Fire-Qcom
Note
1. If I forgot to add someone in credits please PM me.
2. Changing file system from f2fs to ext4 will wipe your internal storage too.
ROM OS Version: 6.0.x Marshmallow
ROM Kernel: Linux 3.10.x
ROM Firmware Required: TWRP-3.0.0
Based On: CyanogenMod
Version Information
Status: Beta
Current Beta Version: 20160323
Beta Release Date: 2016-03-23
Created 2016-03-23
Last Updated 2016-03-23
Click to expand...
Click to collapse
Copy cat :v
This guy copy cyanogenmod source lol
Just compiling nothing else :v :v
And all bugs fixed by cyanogenmod devs
Shame on yu :v :v

aashishhacker said:
Copy cat :v
This guy copy cyanogenmod source lol
Just compiling nothing else :v :v
And all bugs fixed by cyanogenmod devs
Shame on yu :v :v
Click to expand...
Click to collapse
Okay then, there is a section of contributors. Do check that!
Cyanogenmod is open source anyone can use the codes and make roms..
You dont like it... Dont install it
Sent from my MotoG3 using Tapatalk

alright
Then where is the credit of cyanogenmod :v

aashishhacker said:
Then where is the credit of cyanogenmod :v
Click to expand...
Click to collapse
Added

@FireLord haha good to cu here also bro i recently got this phone as extra phone for company use and guess what note 3 neo dev is here haha

shaktishekhar said:
@FireLord haha good to cu here also bro i recently got this phone as extra phone for company use[emoji14]and guess what note 3 neo dev is here haha
Click to expand...
Click to collapse
Haha..
Sent from my MotoG3 using Tapatalk

Thxs For Showing Interest On Jalebi

charansai said:
Thxs For Showing Interest On Jalebi
Click to expand...
Click to collapse
:good::laugh:

Flashed your rom yesterday.....This rom is by far the best rom when it comes to performance...However i did notice 2 bugs in your build..
1.The screen brightness bug which existed in the stock and cm 12.1 roms..
2.A huge battery drain bug..My phone's battery went from 100% to 10% in just 22 mins....When i checked what was eating all my battery it showed only one thing...screen on-0%..
Other than those 2 bugs others work great...Please fix the battery drain bug guys...The screen brightness bug is something we can all live with..But not the battery drain...
Thank You.

Starlord2826 said:
Flashed your rom yesterday.....This rom is by far the best rom when it comes to performance...However i did notice 2 bugs in your build..
1.The screen brightness bug which existed in the stock and cm 12.1 roms..
2.A huge battery drain bug..My phone's battery went from 100% to 10% in just 22 mins....When i checked what was eating all my battery it showed only one thing...screen on-0%..
Other than those 2 bugs others work great...Please fix the battery drain bug guys...The screen brightness bug is something we can all live with..But not the battery drain...
Thank You.
Click to expand...
Click to collapse
Pleasure .. And build 2 is up check first post.
Sorry for that bug try new build
Sent from my MotoG3 using Tapatalk

aashishhacker said:
Copy cat :v
This guy copy cyanogenmod source lol
Just compiling nothing else :v :v
And all bugs fixed by cyanogenmod devs
Shame on yu :v :v
Click to expand...
Click to collapse
@Ashish hacker
To bhai tbse tu copy kyun nhi kiya be..
Jb koi dev apna interest dikha rha h to bich m ungli na kr

Best ROM I have came across on Yunique!!!
Marshmallow , velocity kernel , optimized , updated sources and bug free.. Can't ask for more
Brought Yunique Back to life !! Impressive work dev
Sent from my YU4711 using Tapatalk

System not booting up!!!
Hey guys i'm new to xda ....Recently our device(yunique) received official cm13 update....I flashed it and got stuck in a bootloop cause i used a cm 12.1 recovery...Then i updated the recovery to cm13 based recovery and flashed the official cm13..Everything worked fine...My phone even booted up and it was super smooth and had an awesome battery backup....Then today morning i got an ota update....I downloaded and after downloading i hit on reboot and install...The phone went off...and then the ota installation scree came on and off...This flickering went on for about 45 minutes...So i long pressed the power button knowing that this could screw up my phone....the i tried switching my phone on...the same updating screen came up so i decided to change the recovery and try to install the update manually...I installed the twrp 3.0.x.I could boot into this recovery so i thought things were normal,so i did a factory reset and successfully flashed the official cm13.....However when i hit reboot system,my phone reboots only into the twrp recovery...It is not booting into the system...Then i flashed cyanogenmod recovery...Those cyanogenmod recovery dont load at all any more....Both fastboot and adb work when i'm on twrp....So guys someone please help me out....

Starlord2826 said:
Hey guys i'm new to xda ....Recently our device(yunique) received official cm13 update....I flashed it and got stuck in a bootloop cause i used a cm 12.1 recovery...Then i updated the recovery to cm13 based recovery and flashed the official cm13..Everything worked fine...My phone even booted up and it was super smooth and had an awesome battery backup....Then today morning i got an ota update....I downloaded and after downloading i hit on reboot and install...The phone went off...and then the ota installation scree came on and off...This flickering went on for about 45 minutes...So i long pressed the power button knowing that this could screw up my phone....the i tried switching my phone on...the same updating screen came up so i decided to change the recovery and try to install the update manually...I installed the twrp 3.0.x.I could boot into this recovery so i thought things were normal,so i did a factory reset and successfully flashed the official cm13.....However when i hit reboot system,my phone reboots only into the twrp recovery...It is not booting into the system...Then i flashed cyanogenmod recovery...Those cyanogenmod recovery dont load at all any more....Both fastboot and adb work when i'm on twrp....So guys someone please help me out....
Click to expand...
Click to collapse
You can try flashing some other roms like Temasek or something else.. You will get best support at http://forums.yuplaygod.com/
Under your device section
Sent from my MotoG3 using Tapatalk

Where is Twrp 3.0.0 for Yunique ? i saw only for Yureka

Lazyboner5 said:
Where is Twrp 3.0.0 for Yunique ? i saw only for Yureka
Click to expand...
Click to collapse
Check yu forum bro..
Sent from my MotoG3 using Tapatalk

Related

[ROM] [5.1.1] [BETA] [UNOFFICIAL] [CarbonROM LP] Klimtwifi

CarbonRom is an aftermarket firmware based on the CyanogenMod and Android Open Source Project.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
We are dedicated to fast, stable, and feature-filled roms, honesty and communication with our users, and openness with our code. We like frequent builds, with the very latest and greatest hardware support and fixes. We strive to not only provide you with the best rom we can build, but also to give back to the Android community and our fellow developers. For us, this is about creating something we can be proud of and hope you will enjoy.
Please feel free to look at, build, and use our code on CarbonROM GitHub.
We would like to thank CyanogenMod for their device trees, framework/settings mods and their code that was incorporated into this project. We also extend our gratitude to the devs whose code that we have incorporated. Proper authorship has been maintained and can be viewed on our repository.
Special thanks also go to Slim Rom for some of their features, AOKP, and anyone else we may have borrowed commits from that hasn't been mentioned here. If you feel you have been unfairly left out, please - let us know.
While we make every effort to test these builds as much as possible, we are not responsible for anything that may happen to your device, family, pets, or perception of reality. We ask that you do your part to know your device and know how to recover from problems before you flash! If you have questions, ask your fellow users or ask us in #teamcarbon on freenode IRC.
Partial Feature set:
Code:
CM Theme Engine
Wi-Fi notifications
AudioFX Equalizer
AOSP & CM Audio features
Camera Shutter sound,
Screenshot Sound,
Safe Headset Volume,
Less frequent notification sounds, etc.
Volume steps,
Audio charge notification
Adaptive Brightness
Daydream
Ambient Display
Wake Up on Charge
Double Tap to Sleep
Omni Screen Recorder
Color Calibration
Expanded desktop
CM Notification manager
Slim Heads Up Notifications and its features
CM shortcuts
Slim shortcuts
Weather with custom style
Slim Clock & Date Options
Weather
Battery Options
(Portrait, Landscape, Circle, Dotted Circle Text or Hidden)
Mobile & Wifi Network activity icon options
Network traffic monitor
Brightness control
notification count
notification ticker
Custom carrier label options
CM custom Navigation Bar tweaked (size/color and other)
Custom Navigation ring
Toast animations,
Listview animations,
System animations,
Gesture Anywhere,
App Circle Side Bar
Clear All Button Tweaks
Hideable Google search bar
Slim PIE
Tile Options (Fully customizable)
SlimActions Tile
Quick Setting Options
Quick & Smart Pulldown
Colorized Tiles
Fully CM customization for hard buttons (tweaked)
Omni Wake lock blocker
SuperSU - Huge thanks to @Chainfire
Customizable Power Menu
Installation Instructions:
1) Make sure you have root access and a proper custom recovery installed.
2) Download CarbonROM and the GApps of your choice.
3) Reboot to recovery.
4) Take a backup of your current ROM, in case something goes wrong.
5a) Wipe data, cache and dalvik cache(i.e factory reset).
5b) If you want, you can choose not to wipe anything listed above.
6) Flash ROM and respective GApps.
7) Reboot and voila! Carbon is ready to rock!
Download ROM and GApps:
Klimtwifi
Banks 5.1.x GApps(Use whichever GApps you want)
Thanks to:
AICP and Davor Bertovic @LorD ClockaN
The whole Carbon Team
Cyanogenmod for their incredible work
AOKP
SlimRoms
OmniRoms
Sources:
CarbonROM
Deathly Kernel Source
Disclaimer: We are not responsible for any damages to your device or at something/someone else related.
Enjoy people!​
XDA:DevDB Information
[ROM] [5.1.1] [UNOFFICIAL] [CarbonROM LP] Klimtwifi, ROM for the Samsung Galaxy Tab S
Contributors
deadman96385
Source Code: https://github.com/CarbonROM
ROM OS Version: 5.1.x Lollipop
ROM Kernel: Linux 3.4.x
Version Information
Status: Beta
Created 2015-06-16
Last Updated 2015-06-16
Bugs:
Carbon Fiber menus disappear from time to time go to status bar menu then scroll all the way to the right then click on the menu you actually wanted i'll see if i can fix it.
Some of the carbon fiber menus aren't named properly guessing it's a tablet issue
Reserved
Your on a roll with these roms man! Even though I don't own the 8.4, I appreciate what you have done!
DUHAsianSKILLZ said:
Your on a roll with these roms man! Even though I don't own the 8.4, I appreciate what you have done!
Click to expand...
Click to collapse
True. Because of him im gonna sell my T805 and buy T700 Can U make rom based on aosp or cm for T805 PLZ:fingers-crossed:
What device is this ROM for?
T700? T800? T805?
DarkDvr said:
What device is this ROM for?
T700? T800? T805?
Click to expand...
Click to collapse
It is for the TAB S 8.4 Wifi SM-T700
DUHAsianSKILLZ said:
Your on a roll with these roms man! Even though I don't own the 8.4, I appreciate what you have done!
Click to expand...
Click to collapse
Thanks man, trying to spruce some life into the community with options
Dizzyrul3z said:
True. Because of him im gonna sell my T805 and buy T700 Can U make rom based on aosp or cm for T805 PLZ:fingers-crossed:
Click to expand...
Click to collapse
If i had the device i could, but i do not have the time to try and blindly make it work without one.
Installing it now
Why is this fourm so lifeless?
On both LiquidSmooth and Blisspop, I have noticed a lag. Hopefully this ROM doesn't have it!
Just installed the rom. Works well so far. No lag..
Nandr0idC0nsumer said:
Installing it now
Why is this fourm so lifeless?
On both LiquidSmooth and Blisspop, I have noticed a lag. Hopefully this ROM doesn't have it!
Click to expand...
Click to collapse
Lol, if the ROM you build isn't LiquidSmooth I do not believe you should be naming it LiquidSmooth, haha but that's just my opinion. But the name is so freggin cool though, and can even be changed around to SmoothLiquid, hehe. Almost how this screen is so smooth... Anyway, it runs very very smooth for me, on my N7 that is...
I think I want to try this also. I just got my T700 yesterday so not really sure I have read enough to be flashing it yet. Already rooted and installed TWRP, but still maybe I should read up a little bit more. My Nexus 7 was so easy to customize, but this screen just won out when I saaw my brothers T700. I had to have it fast after that...
I need to make a list of ROMs for the T700, and then eventually try them all so long they are fairly new and updated. I can't stand 5.0, but 5.1 seemed to fix many issues for me on the N7. Anyway thanks for the ROM man. :good:
SkOrPn said:
Lol, if the ROM you build isn't LiquidSmooth I do not believe you should be naming it LiquidSmooth, haha but that's just my opinion. But the name is so freggin cool though, and can even be changed around to SmoothLiquid, hehe. Almost how this screen is so smooth... Anyway, it runs very very smooth for me, on my N7 that is...
I think I want to try this also. I just got my T700 yesterday so not really sure I have read enough to be flashing it yet. Already rooted and installed TWRP, but still maybe I should read up a little bit more. My Nexus 7 was so easy to customize, but this screen just won out when I saaw my brothers T700. I had to have it fast after that...
I need to make a list of ROMs for the T700, and then eventually try them all so long they are fairly new and updated. I can't stand 5.0, but 5.1 seemed to fix many issues for me on the N7. Anyway thanks for the ROM man. :good:
Click to expand...
Click to collapse
It's not my rom
I ended up switching, in the end, to IronROM. Much smoother than AOSP.
Nandr0idC0nsumer said:
It's not my rom [emoji14]
I ended up switching, in the end, to IronROM. Much smoother than AOSP.
Click to expand...
Click to collapse
Yeah I know that, I was just generalizing and poking fun at it.
Sent from my SM-T700 using Tapatalk
OK I have tried every ROM that is on this forum an d I must say this is the best ROM out of them all very smooth, fast and stable...I hope this ROM gets more updates for a long time... Thank you to all who have help make this ROM.....
Sent from my SM-T700 using Tapatalk
Does this rom have a built in dark mode, or is it the standard Carbon darkness? I mean does it have a true black mode "switch" similar to SlimROMs?
EDIT: I'm just going to try this as my first ROM on the T700. I loved CarbonROM on my Nexus device back in early 2014, so its probably just as good now I would think. Thanks
EDIT 2: Anyone manage to convert file systems data and cache to F2FS?
EDIT 3: Wow, this ROM is just as nice as I remember it being on my Nexus 7.
EDIT 4: I found Dark Material theme in the play store so I am very happy so far.
Oh and yes, I can make it significantly faster using F2FS... Yay the perfect setup and I only had to try one ROM. [emoji2]
New 6/27 build in OP
Latest Deathly Kernel updates see here for details
Carbon Changes:
Enable Developer settings by default
Option to disable torch when the screen turns off (Fixed)
Switch to SlimRoms nav bar settings
CM's Dyanmic tiles
Wifi priorities
Configure wifi country codes
Slim Pie
Misc changes/fixes
6/27 seems to be running really smooth.
Only problem is apps that test the storage, such as androbench unexpectedly close the second they start to write to the F2FS partition. I tried two different apps with the same results, so I can't test the differences between ext4 and F2FS which was the goal. Is it possible to format the partitions cache and data while in Android? Or from a PC maybe? I don't think twrp is formatting correctly or something along those lines as it throws a error message, but then says it was successful. The ROM seems to work though so not sure why apps that need to write test fail to do so.
Any ideas or tips would be appreciated as this device is very new to me and quite different from my Nexus 7. Thanks
Sent from my SM-T700 using Tapatalk
The link in the OP is the 6/16 build. Where is the 6/27 build? Please and thank you...
IIDr0iDJuNkiEII said:
The link in the OP is the 6/16 build. Where is the 6/27 build? Please and thank you...
Click to expand...
Click to collapse
The link in the OP is 6/27, I just clicked on it again and its still 6/27.
It takes you to this-> https://www.androidfilehost.com/?fid=24052804347765885
SkOrPn said:
The link in the OP is 6/27, I just clicked on it again and its still 6/27.
It takes you to this-> https://www.androidfilehost.com/?fid=24052804347765885
Click to expand...
Click to collapse
Thanks. Weird that link was still 6/16 5 minutes ago. Still have the tab open that proves it...LOl
Thanks for the help!

Rom 7.1.2 crDroidAndroid-7.1.2-v3.4_L-ROM.RU Meizu M2 Mini (3.7 VIP Updated)

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Rom Sources are updated check out for latest builds and changelogs/Download Links Below!
Note:This Rom is neither Compiled nor Developed By Me All Credits To Compile Goes To
Crezil 1/Lunik
Credits
First of All I would like to thanks Crezil 1 (For Compiling rom for us and giving permission to post it on XDA) :good: :good:
Also i would like to say Thanks to vasiliy.ivanov Aka Lunik(Owner Of L-rom.ru)&Main Contributor Also Build Host Of most of Roms Without Him it was not Possible :fingers-crossed: :good: :good:
Source Link of his site L-Rom.ru thanks alot for contributing to mtk6735 platform
http://l-rom.ru/forum/1-%D0%BF%D0%BE%D0%B4%D0%B4%D0%B5%D1%80%D0%B6%D0%B8%D0%B2%D0%B0%D0%B5%D0%BC%D1%8B%D0%B5-%D0%BD%D0%B0%D0%BC%D0%B8-%D1%82%D0%B5%D0%BB%D0%B5%D1%84%D0%BE%D0%BD%D1%8B-%D0%BD%D0%B0-%D0%BC%D1%826735-%D0%B8-mt6753/
My Work is to find out Roms from different forums and Re-post them for Indian/Indonesian Users Have Permission To Post but still i don't have permission to post direct download link of rom
Code:
[B][SIZE="4"]#include
/*
* Your warranty is now void.
*
* Noobs keep distance
* Do not try if you dont know what is a "Rom"
* We aren't responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*/[/SIZE][/B]
Firmware crDroid is on a level with Temasek one of the most famous custom firmware for Android phones. Currently, firmware crDroid All Android OnePlus One addition is used by many brands of phones Motorola, Google Nexus, HTC, LG , Samsung, OPPO and drugie.V it additionally built a lot of different functions from other custom firmware such as AOSPA, SlimRoms, OmniRom and RR, etc. . this crDroid is one of the most stable and customized firmware.
crDroidAndroid-v3.6_L-ROM.RU - Nougat Source 2017 for Meizi M2mini
(Android 7.1.2)​
CORRECTIONS AND MODIFICATIONS
Update crDroidAndroid-7.1.2-v3.4_L-ROM.RU- OS Nougat Source 2017 for Meizu M2mini
Updated revision in the source r_17
Updated " Security " All Android on 05/06/2017
Root is built (Included in " Settings Developer ")
Support Substratum Theme Engine
The Display Live (it is better to turn off in order to avoid "brakes", nevertheless it is operational)
Night mode is turned on only after the tile in the curtain
Works Import with Sim card ( Export does not work in the process of correction )
"Hardware overlay " is enabled by default
Reduced download the firmware
Fixed camera SNAP (Do not hang up when take pictures)
Full system optimization
Built-in application " the Open GApps " for installation of the system Gapps
Note:-This New Version of VIP firmware is ported by me from meizu m2 note from 4pda
source page here https://4pda.ru/forum/index.php?showtopic=761874&view=findpost&p=65111375\
New Version Comes with fixed video recording but we have to compromise with lag less video playback at Youtube
so use 90 Overlay fix flash zip file to fix lag that's why use it and enjoy and for sound use Dolby mod
New Build Updates! VIP Firmware CORRECTIONS AND MODIFICATIONS
Added "Engineering menu MTK" settings are not all in Russian (Audio settings work) also added YGPS settings
Added theme movers from Paranoid Android (In the official version of the developer it does not and will not) Extras. Settings - Screen
Replaced launcher to launcher Lawnchair
Edits Communications
Added widget Weather LockClock of RR (compiled from source)
Small changes in the system
There are some changes in the advanced settings of
"security system" All Android from 05/08/2017
Works Import with Sim card (Export does not work in the process of correction)
Full system optimisation
ScreenShots
What works?
1)RIL (link) on the first and second SIM-card.
2)Data transmission over a mobile network.
3)WiFi (establish a connection with the access point, operating data)
4)GPS
5)The camera (the main and the front camera works, including works and video.
6)OMX hardware codecs
7)LED flash.
8)Sound
9)Live Display (it is better to turn off in order to avoid "brakes", the nemenee it is operational)
10)Record screen (screen recording)
11)Recording from a microphone (sound recording)
12)Bluetooth (tested transmit / receive files between two devices, work with other profiles such as headset, etc.
13)WiFi AP (creation WiFi access point)
14)Recording a conversation with a line of regular operating system tools
Download Links
New Updated Rom
https://drive.google.com/open?id=0Bz6Fq2POoJTlV0VKcW0wRW5QU0U
New Custom Kernel 4.9 For Latest CrDroid 3.7
https://drive.google.com/open?id=0Bz6Fq2POoJTlb1lOZEFGSWhGV2M
Sensor Fix For new Latest crDroid 3.7 too
https://drive.google.com/open?id=0Bz6Fq2POoJTldi1hanN5SjhGa00
90 Overlay Fix
https://drive.google.com/open?id=0Bz6Fq2POoJTlY0ZRTHRtR0wtSzA
Old Version Rom
https://drive.google.com/file/d/0B-BETpTtPA8RQmtndkMyN014LWs/view
Source Page
http://l-rom.ru/topic/129-crdroidandroid-v36_l-romru-nougat-source-2017-for-meizu-m2-mini-globalnoe-obnovlenie-ot-l-romru/
Note:-Download Battery toggle fix for android 7.1.2 rom to fix battery toggle bug :good:
https://forum.xda-developers.com/meizu-m2-mini/how-to/guide-fix-battery-saver-toggle-problem-t3627513
New Rom Latest one Flash This Patch It will fix Youtube Lag
https://drive.google.com/open?id=0Bz6Fq2POoJTlQzVxSW9MWndNams
Sources?
Developer Informed it he will not release sources of his work i can't do anything in this case
Open Sources By Devis 1969
Kernel Sources :good: :good:
https://github.com/divis1969/android_kernel_meizu_meilan2
Vendor Blobs :good: :good:
https://github.com/divis1969/android_vendor_meizu_meilan2
Device Tree :good: :good:
https://github.com/divis1969/android_device_meizu_meilan2
Don't Forget To Press Thanks if you like it :good: :good:
Regards~
Murtaza Piplod
Excellent ROM one bug I found is that after turning on live display phone starts to lag a bit and it's get unusable while screen recording it's necessary for Unlucky People like me who has red stripes defect on display fix this plz
And really appreciate your work thanks
[email protected] said:
Excellent ROM one bug I found is that after turning on live display phone starts to lag a bit and it's get unusable while screen recording it's necessary for Unlucky People like me who has red stripes defect on display fix this plz
And really appreciate your work thanks
Click to expand...
Click to collapse
rom do not lag but but transactions lag
go to settings and disable transactions animation
murtaza1326 said:
rom do not lag but but transactions lag
go to settings and disable transactions animation
Click to expand...
Click to collapse
Already disabled and it's only happens in nougat ROM but in cm12.1 its
works superfine
[email protected] said:
It's disable animations and it's only happens in nougat ROM but in cm12.1 its
works superfine
Click to expand...
Click to collapse
well its bcz of rom arch do not support live display up to notch for live display but in los it works perfectly
Works very good. Only thing i see that front camera doesn't work in few apps.
Adn wifi signal is weaker.
sensors patch added
laggy
even after flashing the IOS animation the system is laggy, what is wrong with it? and do you know how to make it smoother anything close to flyme 4 will also work. How can someone use such a firmware, that russian dude is good but what is the point when things are super slow?
r24patrik said:
even after flashing the IOS animation the system is laggy, what is wrong with it? and do you know how to make it smoother anything close to flyme 4 will also work. How can someone use such a firmware, that russian dude is good but what is the point when things are super slow?
Click to expand...
Click to collapse
who said it's super slow?? lol there is nothing like super slow here :v
it's all good i am using this firmwares based on stock android from past 3 months i didn't even find a lag here :v if i run multiple task heavy app usage and all it will lag but not that much as you say you are doing something wrong there is nothing like lags in this firmwares
murtaza1326 said:
who said it's super slow?? lol there is nothing like super slow here :v
it's all good i am using this firmwares based on stock android from past 3 months i didn't even find a lag here :v if i run multiple task heavy app usage and all it will lag but not that much as you say you are doing something wrong there is nothing like lags in this firmwares
Click to expand...
Click to collapse
okay if you say so but do you also say that every other nougat rom like RRmix for meizu m2, the roms you posted earlier are as smooth as this one is!? And can you point what actually might be the problem because we both have the same device!
r24patrik said:
okay if you say so but do you also say that every other nougat rom like RRmix for meizu m2, the roms you posted earlier are as smooth as this one is!? And can you point what actually might be the problem because we both have the same device!
Click to expand...
Click to collapse
i can't you just said its lagging but how i can know how it lags
2 possible reasons to lag is
1)Live display is enabled just disable it
2)Night mode is enabled just disable it
this 2 are only reason for any rom to lag
@murtaza1326 have you tried to root with magisk? What was the experience? I tried flashing from custom recovery but it always gets stuck on CRDROID booting screen. Any ideas?
lilcat1 said:
@murtaza1326 have you tried to root with magisk? What was the experience? I tried flashing from custom recovery but it always gets stuck on CRDROID booting screen. Any ideas?
Click to expand...
Click to collapse
i use magisk :v no problem
murtaza1326 said:
i use magisk :v no problem
Click to expand...
Click to collapse
Any idea why my phone gets stuck on CRDROID booting screen?
lilcat1 said:
Any idea why my phone gets stuck on CRDROID booting screen?
Click to expand...
Click to collapse
You flashed the custom kernel, didn't you?
What would be the appropriate steps to install this ROM
I flashed
ROM
Custom kernel crdroid
Then gapps of RR 5.8.3
Batteryfix
Sensor fix
YouTube lag fix
And when I rebooted it got stuck at welcome screen .....guide me lil bit is m doing something wrong
Sanjeevyadav said:
What would be the appropriate steps to install this ROM
I flashed
ROM
Custom kernel crdroid
Then gapps of RR 5.8.3
Batteryfix
Sensor fix
YouTube lag fix
And when I rebooted it got stuck at welcome screen .....guide me lil bit is m doing something wrong
Click to expand...
Click to collapse
try this
flash rom and mods first then reboot after you setup your phone
then reboot and flash G-apps
ChakibDEV said:
You flashed the custom kernel, didn't you?
Click to expand...
Click to collapse
Yes
lilcat1 said:
Yes
Click to expand...
Click to collapse
Well, don't. It doesn't work, mine also gets stuck at boot animation when I flash it
ChakibDEV said:
Well, don't. It doesn't work, mine also gets stuck at boot animation when I flash it
Click to expand...
Click to collapse
Any idea how to root the phone otherwise. I tried KingRoot but I guess it doesn't work on Android 5.1 and above...

A.I.C.P 13.1 [Oreo/8.1][3.10][Unofficial][22-Mar][Weekly]

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
AICP
Android Ice Cold Project​
AICP is known by everyone as the "Ice Cold Project" that started on a Desire HD years ago (2012) and since then evolved into a mature ROM with the BEST community you can find!!!
Until Lollipop, the Rom has always been based on AOKP. Unfortunately, since AOKP stopped development (but made a comeback later), we changed our base to CM when it comes to hardware, drivers and some features.
With the rebrand of CM to LineageOS (LAOS) we are now actually LAOS based with some tweaks from AOSP.
If there are any bugs, either we will sort them out or the LAOS team will if it concerns their code base. This rom isn't LAOS supported, so no need to report errors or bugs to them!!
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you. Hard & a lot.
*
*/
W.I.P.
In the beginning we would like to thank:
LineageOS & CM (R.I.P.) team
@Maxwen and the rest of the OmniRom team
@razorloves for his awesome work with all Nexus devices on LineageOS
DU team
SlimRoms team
Resurrection Remix team
Community
...
@LorD ClockaN
@zipsnet
@eyosen
@semdoc
@Hashbang173
@SpiritCroc
@wartomato
@eboye
plus the rest of the crazy bunch that we call "team"
...
Check in Settings
Not working:
IR
NFC
FAQ:​
Before using the ROM:
Q. Can I have an ETA for the next build?
A. Yes, just look in the OP to see, if your device is build on a nightly or weekly schedule.
Q. Does this ROM support custom kernels?
A. No. You can still use them (as long as they are LOS based), but discussion should go in the thread of the respective kernel. We don't offer support for bugs you might encounter using them!
Q. Why doesn't this ROM support Xposed?
A. Xposed is a hack that is geared towards AOSP, custom ROM's modify the framework a lot, so Xposed can cause a ton of issues on custom ROM's. Now it might work for you, however it is not to be discussed in this thread, and you should refrain from posting bug reports.
Q. Alright, but I still want to flash Xposed, so which version do I need to install?
A. Xposed is not yet available
Flashing the ROM:
Q. What do I need to know before flashing?
A. Check the install instructions in the first post...
Q. Can the builds be dirty flashed over each other?
A. Yes, however make a nandroid first as there is a chance of getting a bootloop or encountering bugs. Also bugs may only be reported on a clean flash.
Q. How do I dirty flash builds?
A. Wipe System, Cache and ART/Dalvik cache. Flash the ROM, your preferred root solution and reboot. Or you might just use the OTA app to preform that task for you.
Using the ROM:
Q. How do I enable software buttons?
A. Settings -> Navigation -> Enable navigation bar. The bar can be configured separately in its settings.
Q I installed a bad theme and now I'm getting a bootloop, how do I fix it?
A In TWRP, flash the substratum rescue zip in the substratum folder on the internal storage.
Q I keep losing root with Magisk, how do I fix it?
A Check this out, if that doesn't work for you ask for help in this thread, read or ask in the Magisk thread on XDA or just flash Magisk again!
Q I'm having issues with WhatsApp, how do I fix it?
A Read this
Q. Do I need to provide a logcat if I'm reporting a bug?
A. If you want it to be fixed faster (or at all) then yes, you should definitely provide a logcat. (Note: Please just link the logcat from your GDrive, Dropbox, etc. and do not post the content here. Thanks.
Q. How do I get a logcat, what type should I get and more questions that can conveniently be answered by my pre-determined answer?
A1. Read this thoroughly. Also, here's a good app for getting logs: https://play.google.com/store/apps/details?id=com.tortel.syslog
A2. If you are already rooted, you can use the built-in feature to make a logcat and provide that. Just look into the root section in the AICP Extras menu.​
​
The ROM should contain everything you need to enjoy Android Oreo. You don't need to install any Add-Ons, simply download the latest ROM, GApps, flash it and go!
If you want the device to run the ROM "rooted", you can flash a root solution of your choice after the ROM Zipfile.
It is STRONGLY recommended to fully wipe your device before flashing, and if possible avoid restoring system apps and system data with Titanium Backup as this can cause stability issues that are very hard to debug.
If you believe you know what you're doing - then fine, go ahead, but please don't complain if you experience any strange behavior.
How To Flash:​
(Again: Don't do it if you don't know it!)​
1. Download the ROM, GApps and Magisk 14.0 (Optional) then transfer them to your device
2. Boot to recovery (TWRP recommended)
3. Wipe system, Cache, data and ART/Dalvik cache
4. Flash ROM Zipfile
5. Flash/Install GApps (optional, needed for e.g. Google Playstore to work)
6. Flash/Install the root solution of choice (optional) - Magisk 14.0 works pretty nice!
7. Reboot to system
The ROM has GApps persistance in between dirty flashes, so you only have to flash them once!
The root solution should be flashed together with every OTA update (= ROM Update)!
Supported Root Solutions:​
Magisk v14.0​
https://github.com/AICP/
If you want to contribute to the AICP or wanna see what is being worked on/merged, feel free to visit our Gerrit review system. (Link is at the bottom!!!)
ROM & Additional links:
Gerrit Code Review
Github
IceColdJelly AICP G+ community
Kernel
https://github.com/vasishath/kernel_cancro/tree/3.10-release​
XDA:DevDB Information
AICP , ROM for the Xiaomi Mi 3
Contributors
Shahan_mik3, vasishath
ROM OS Version: 8.x Oreo
ROM Kernel: Linux 3.10.x
Based On: Laos
Version Information
Status: Beta
Stable Release Date: 2018-01-30
Current Beta Version: v5
Beta Release Date: 2018-03-22
Created 2017-11-27
Last Updated 2018-03-22
Latest Stable Release Version 13.0
Download link:
https://www.androidfilehost.com/?fid=962021903579495043
Thanks to below users for supporting us
@ydd0ras has been contributing from begining Thanks mate
@JulianJenner
@Airlibik
@sugnuf
If you are unable to donate due to restrictions. Follow below steps
1: log into your PayPal account
2: click on the menu button and selected send & request
3: click to pay for goods or services
4: type in email ([email protected]) where it says email, phone number or name then click next.
5: type in amount u want to send, in instructions to seller box write donation for xxxx and change mailing address to no address needed and hit continue
6: brings you to a confirmation screen that looks almost exactly like the previous screen and with a send money now button & cancel text below it. Hit send money now!!!!
thanks
Screenshot​
thank you
interface of this rom sucks.. i miss my old cm 12 from Oneplus One
Downloading
Sent from my MI 4LTE using Tapatalk
aeolus777 said:
interface of this rom sucks.. i miss my old cm 12 from Oneplus One
Click to expand...
Click to collapse
Go back to ur old cm 12 on oneplus one. No one is stopping u xD
Shahan_mik3 said:
Screenshot
Click to expand...
Click to collapse
How did you themed like this? I can't find any dark theme option
Good going buddy @Shahan_mik3
Shahan_mik3 said:
Go back to ur old cm 12 on oneplus one. No one is stopping u xD
Click to expand...
Click to collapse
My 1+ is dead, broken screen, i ressurected it 3 times but now i has **** mi4 with 100500 roms and no one working normal. All are los+extras, nothing new, just bugs bugs bugs and betatesting from 7 to 8 android. **** phone and roms on it
aeolus777 said:
My 1+ is dead, broken screen, i ressurected it 3 times but now i has **** mi4 with 100500 roms and no one working normal. All are los+extras, nothing new, just bugs bugs bugs and betatesting from 7 to 8 android. **** phone and roms on it
Click to expand...
Click to collapse
Well u have miui
hello @Shahan_mik3 mate. First many thanks for the mention. You know I have always appreciated your and vasis works. Now i must see you have released brand new stuff and I have no cancro. My son has damaged bis Redmi 4a and I gave him my beloved cancro. What a pity.
Now I am using my OPO and my brand new Mi A1. Hope someday you will have one as well, because this means i will have a nice custom ROM.
No, just kidding.
Cheers & greetings!
no button customization ,so no way to open menu of some apps
and also searching" button" in setting app and select any result is crashing settings app
REDISBLOOD said:
no button customization ,so no way to open menu of some apps
and also searching" button" in setting app and select any result is crashing settings app
Click to expand...
Click to collapse
DUI is on its way...once complete will have button settings
ydd0ras said:
hello @Shahan_mik3 mate. First many thanks for the mention. You know I have always appreciated your and vasis works. Now i must see you have released brand new stuff and I have no cancro. My son has damaged bis Redmi 4a and I gave him my beloved cancro. What a pity.
Now I am using my OPO and my brand new Mi A1. Hope someday you will have one as well, because this means i will have a nice custom ROM.
No, just kidding.
Cheers & greetings!
Click to expand...
Click to collapse
Well mi a1 was supposed to be fastest to update android version as it is android one..but it's opposite of what was expected and not much dev I assume
@Shahan_mik3 Plz reply me.. How did u put black theme to settings as shown in the screenshot? Is it substratum?
Sent from my MI 4LTE using Tapatalk
Wow..finally my favourite AICP 13 (Oreo) is born?... fantastic.. many thanks for your hardwork @shahan:good:
Sent from my cancro using XDA Labs
saliksack said:
@Shahan_mik3 Plz reply me.. How did u put black theme to settings as shown in the screenshot? Is it substratum?
Click to expand...
Click to collapse
Lone4subs theme
button remapping doesnt werk and please add ddtw in the kernel, its very good rom, thank you dev

[CLOSED][ROM][J2LTE][TW-MM] Hades Rom V1

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Some Personal Thoughts:
- You should read at least install instructions stated in this post - I won`t offer support for any issues regarding installation.
- Bug reports without device variant and logs can't be considered bugs - Make sure you provide detailed info when reporting bugs.
- Press 'Thanks' button instead of saying it - It will keep the thread clean and keep me motivated to do more.
- Feel free to Donate To Me if you want to support my work.
- If you take any of my work without my permission I'll report you, and you'll probably get banned.
General Fetures:
Full A7 2017 Port based on A720FXXU1AQC5 firmware, on G550FYXXU1BPFA base
Aspiration Kernel V1.5
August Security Patch
Denoxed
Init.d support
Aroma Installer
Aroma latest root options (Magisk and SuperSU)
Downloadable apps removed
Rom Control
AOD
Edge panels
Fake Knox 0x0
Patched Safetynet
Private mode
VoLTE
Multi CSC
All apps multiwindow
Supporting most of known variants (J200G/GU/F/M)
Disabled Signature checks
Enabled "Device Status Official" - Removed SysScope dependency
Added ROM info in Settings>About Device>Software info
Added Floating message (settings and toggle)
Maybe more.. Will update when i`ll remember
ROM Control:
Battery Bar Settings
Network Traffic Settings
Battery Percentage Color
Enabled Tap Clock To Launch App
A.O.K.P Ram Bar
Recent Panel Blur
Volume Panel Border Settings (Don't Work Great)
Lockscreen Weather Color
Lockscreen Clock And Date Color
Lockscreen Second Clock
Lockscreen Rotation
Custom Carrier Label Quick Panel
Quick Panel Header Clock/Date Color
Custom Data Usage View In Quick Panel
Quck Curtain Launch Enable/Disable
Memory Cleaning Panel In Quick Panel
Notification BG Shape Settings
Toggle Text Enable/Disable
Multiuser Avatar Enable/Disable
Brightness Bar In Quick Panel Hide/Show
Music Visualizer
Power Menu Toggles
USB Plug In/Out Wakeout
Turn On Flashlight By Pressing And Holding Volume Up Key While The Screen Is Off
Settings Layout
SMusic Edge Light
Aroma Setup:
MultiCSC
Camera options (Choose A7 Camera For Now.)
4G Data Icon in status bar
Installation Steps:
Make sure you have TWRP installed
Download the ROM and patch zips (if any), and transfer to your phone.
Boot the phone into Recovery Mode .
Do a FULL wipe: Dalvik Cache, Cache, Data, System even if coming from a port rom.
Flash ROM.
The first boot may take 15-20 min.
Setup Your Device.
Then Boot Into Recovery And Flash Patch1.zip .
Enjoy ROM. :good:
Notes:
Please read and search before asking any question that hasn't been asked before and keep this thread clean.
I am not responsible for any damages on your device.
If you like to include any piece of this project in your project contact me first.
Telegram Support:
Updates and Info Channel
Galaxy J2 Group
How about bugs?
This is a port rom so expect some bugs due to the fact that all features and mods including in this rom are supposed to be running on a device with a different hardware structure. However I tried to fix most of the issues and provide a rom for daily use.
Major issues for your info:
Flash and report
Credits:
corsicanu
Kamy
Patrick.H - NX Team
thereassaad
gharrington
ananjaser1211
Ticklefish
malbert16442
BlackMesa123
karkasss
TaifAljaloo
asc1977
jjjhitel
Albe96 (LOL)
darkera13
wellaflex
ion1s
yash92duster
Eleo
lss1977
tdunham
xperiacle
Wuby986 and daxgirl - Genius People
DaOldMan
tamirda
ikrom
SuperR.
venkat kamesh
remuntada78
Chainfire
topjohnwu
amarullz
jovy23
Didact74
dkonect
zhuhang
By Zonik
Please let me know if I am missing someone and i will add.
RC Source Code Here:https://bitbucket.org/corsicanu/hadesrc
Thanks for support.You can donate me if you want! Every little penny is helpful to me.It'll at least help me to pay my server bill or wifi bill. :good:
UPI: [email protected]
Paypal: [email protected]​
XDA:DevDB Information
Hades ROM V1, ROM for the Samsung Galaxy J2
Contributors
Albe96, corsicanu
Source Code: https://forum.xda-developers.com/samsung-a-series/development/rom-hadesrom-v1-0-t3611525
ROM OS Version: 6.0.x Marshmallow
ROM Kernel: Linux 3.10.x
ROM Firmware Required: Samsung TW
Version Information
Status: Alpha
Created 2018-06-30
Last Updated 2018-06-30
CHANGELOG:
Hades ROM V1:
Initial Release
BUGS:
Native Blur
Blue Light Filter[/FONT]
DOWNLOADS:
Hades ROM V1:
Hades ROM V1
Patch 1
F.A.Q:
Q1. Camera Doesn't Work Properly.What Should I Do?
Ans: Use Custom Camera From Google Play Store Untill It Fixed.
Q2. Video Camera Says Failed Message.How To Fix?
Ans: To Get Video Cam Work.Open Camea-->Settings-->Change Video Recording Resolution To--> HD.
Glad to see this . Keep it up!
corsicanu said:
Glad to see this . Keep it up!
Click to expand...
Click to collapse
The port is awesome.Smooth than other roms.Cheers on your initial work ?
Albe96 said:
Some Personal Thoughts:
- You should read at least install instructions stated in this post - I won`t offer support for any issues regarding installation.
- Bug reports without device variant and logs can't be considered bugs - Make sure you provide detailed info when reporting bugs.
- Press 'Thanks' button instead of saying it - It will keep the thread clean and keep me motivated to do more.
- Feel free to Donate To Me if you want to support my work.
- If you take any of my work without my permission I'll report you, and you'll probably get banned.
General Fetures:
Full A7 2017 Port based on A720FXXU1AQC5 firmware, on G550FYXXU1BPFA base
Aspiration Kernel V1.5
August Security Patch
Denoxed
Init.d support
Aroma Installer
Aroma latest root options (Magisk and SuperSU)
Downloadable apps removed
Rom Control
AOD
Edge panels
Fake Knox 0x0
Patched Safetynet
Private mode
VoLTE
Multi CSC
All apps multiwindow
Supporting most of known variants (J200G/GU/F/M)
Disabled Signature checks
Enabled "Device Status Official" - Removed SysScope dependency
Added ROM info in Settings>About Device>Software info
Added Floating message (settings and toggle)
Maybe more.. Will update when i`ll remember
ROM Control:
Battery Bar Settings
Network Traffic Settings
Battery Percentage Color
Enabled Tap Clock To Launch App
A.O.K.P Ram Bar
Recent Panel Blur
Volume Panel Border Settings (Don't Work Great)
Lockscreen Weather Color
Lockscreen Clock And Date Color
Lockscreen Second Clock
Lockscreen Rotation
Custom Carrier Label Quick Panel
Quick Panel Header Clock/Date Color
Custom Data Usage View In Quick Panel
Quck Curtain Launch Enable/Disable
Memory Cleaning Panel In Quick Panel
Notification BG Shape Settings
Toggle Text Enable/Disable
Multiuser Avatar Enable/Disable
Brightness Bar In Quick Panel Hide/Show
Music Visualizer
Power Menu Toggles
USB Plug In/Out Wakeout
Turn On Flashlight By Pressing And Holding Volume Up Key While The Screen Is Off
Settings Layout
SMusic Edge Light
Aroma Setup:
MultiCSC
Camera options (Choose A7 Camera For Now.)
4G Data Icon in status bar
Installation Steps:
Make sure you have TWRP installed
Download the ROM and patch zips (if any), and transfer to your phone.
Boot the phone into Recovery Mode .
Do a FULL wipe: Dalvik Cache, Cache, Data, System even if coming from a port rom.
Flash ROM.
The first boot may take 15-20 min.
Notes:
Please read and search before asking any question that hasn't been asked before and keep this thread clean.
I am not responsible for any damages on your device.
If you like to include any piece of this project in your project contact me first.
Telegram Support:
Updates and Info Channel
Galaxy J2 Group
How about bugs?
This is a port rom so expect some bugs due to the fact that all features and mods including in this rom are supposed to be running on a device with a different hardware structure. However I tried to fix most of the issues and provide a rom for daily use.
Major issues for your info:
Flash and report
Credits:
corsicanu
Kamy
Patrick.H - NX Team
thereassaad
gharrington
ananjaser1211
Ticklefish
malbert16442
BlackMesa123
karkasss
TaifAljaloo
asc1977
jjjhitel
Albe96 (LOL)
darkera13
wellaflex
ion1s
yash92duster
Eleo
lss1977
tdunham
xperiacle
Wuby986 and daxgirl - Genius People
DaOldMan
tamirda
ikrom
SuperR.
venkat kamesh
remuntada78
Chainfire
topjohnwu
amarullz
jovy23
Didact74
dkonect
zhuhang
By Zonik
Please let me know if I am missing someone and i will add.
RC Source Code Here:https://bitbucket.org/corsicanu/hadesrc
Thanks for support.You can donate me if you want! Every little penny is helpful to me.It'll at least help me to pay my server bill or wifi bill. :good:
UPI: [email protected]
Paypal: [email protected]​
XDA:DevDB Information
Hades ROM V1, ROM for the Samsung Galaxy J2
Contributors
Albe96, corsicanu
Source Code: https://forum.xda-developers.com/samsung-a-series/development/rom-hadesrom-v1-0-t3611525
ROM OS Version: 6.0.x Marshmallow
ROM Kernel: Linux 3.10.x
ROM Firmware Required: Samsung TW
Version Information
Status: Alpha
Created 2018-06-30
Last Updated 2018-06-30
Click to expand...
Click to collapse
thanks
massage app working or not??
and fix system ui has stop error?
Does it works on SM-J200H? (J2 3G)
Feridj77 said:
thanks
massage app working or not??
and fix system ui has stop error?
Click to expand...
Click to collapse
Not tested.Will be reported later
Adiletsh09 said:
Does it works on SM-J200H? (J2 3G)
Click to expand...
Click to collapse
Nope
Sir will it work for smj200g 2017 nd is it lte supported
naseer222 said:
Sir will it work for smj200g 2017 nd is it lte supported
Click to expand...
Click to collapse
It will work as there's no difference between j200g 2015 and 2017 version as far as i know
Btw, thanks for your efforts pratik
Downloads Link Added.Follow Installation Instruction.
Ŕu§hi said:
It will work as there's no difference between j200g 2015 and 2017 version as far as i know
Btw, thanks for your efforts pratik
Click to expand...
Click to collapse
Yeah. Thanks ?
Storage only remains 3gb after installation can I remove some apps to increase it in this rom..plz mention some app names that I can remove
Also I m not able to flash any custom rom other than this one after flashing it ..I m only able to downgrade back to lollipop nd again only this custom rom nd nothing else what should I do now its not flashing any rom other than this nd is only downgrading
naseer222 said:
Storage only remains 3gb after installation can I remove some apps to increase it in this rom..plz mention some app names that I can remove
Click to expand...
Click to collapse
install xposed
download Xinternal app and install
and change storage to memory card
naseer222 said:
Also I m not able to flash any custom rom other than this one after flashing it ..I m only able to downgrade back to lollipop nd again only this custom rom nd nothing else what should I do now its not flashing any rom other than this nd is only downgrading
Click to expand...
Click to collapse
Hey! Can you join telegram and message me there? I will try to look into your problem.. waiting for your message
Ŕu§hi said:
Hey! Can you join telegram and message me there? I will try to look into your problem.. waiting for your message here
Click to expand...
Click to collapse
I sorted it out thank u i re downloaded the roms nd they worked thank u again
Man, your roms are so good, but i want to ask, is it possible to make an aosp-based rom? Like lineage os or aex roms but for this phone. Thanks ?
Sent from my Samsung Galaxy J2 using XDA Labs
panchofranXD01 said:
Man, your roms are so good, but i want to ask, is it possible to make an aosp-based rom? Like lineage os or aex roms but for this phone. Thanks ?
Click to expand...
Click to collapse
It is possible.Everything is possible if somebody gives a great intention to a certain project.Well I'm not a AOSP dev admitedly.and the reasons why still we don't have AOSP? it's because the following-->
1.We got lack of devs
2.Not a popular device and with a old chipset.so making hardware trees are hard(in my opinion).

[ROM][10] Lineage Fan Edition v10.69 [ISOTOPE][GARLIC]

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
About LineageOS:
LineageOS is a free, community built, aftermarket firmware distribution of Android 10, which is designed to increase performance and reliability over stock Android for your device.
LineageOS is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. LineageOS does still include various hardware-specific code, which is also slowly being open-sourced anyway.
Fan Edition:
Lineage Fan Edition v10.69 Isotope
This is a personal project based on Lineage OS with some tiny features and UI tweaks to make it cute
Features:
All features from LineageOS
Face Unlock
App Lock
Long Screenshot
Redesigned Battery meter view
New QS Tiles Tint
Blur behind QS panel
Android R Styled Notifications
Pixel UI and Revamped Settings app
Refreshing Wallpaper
OOS Navbar Buttons
Volte Icon
Pixel Blue Lineage Bootanimation
More Accent colours
More Fonts
Lottie Animations in Settings
More Lockscreen clocks (Animated ones too)
Pebble Icon shape
Lawnchair V2 Launcher
Better Inbuilt apps
Toggle For Screenshot sound
Toggle for Three Finger Screenshot
Clean looking QS panel
4G/LTE Switch
Advanced Reboot enabled by default
Some drawables change
May be few more changes idr
For Screenshots and Stuff :Click Here
How to install:
Boot the newest TWRP .img from the Official TWRP Project Site.
Flash ROM, flash GApps (Optional)
Reboot
Download:
LineageOS Fan Edition Garlic
Kernel Source : Click Here
Lineage Source : Click Here
Fan Edition Source : Click Here
Special Thanks to
AOSPA
DotOS
Extended UI
Descendant
Project Sakura
POSP
crDroid ROM
Pixel Experience
Lineage-X
Android Sauce
Lawnchair team
Simple Mobile apps
This thread is for Lineage Fan Edition for the device : YU Yureka Black (garlic)
Device Specific Stuffs :
1. Almost everything works
2. Inbuilt Kimci Screen Recorder with Internal Audio recording
2. Inbuilt Equalizer
If you like my work then hit the thanks button
XDA:DevDB Information
Lineage Fan Edition v10.69 Isotope for Garlic, ROM for the Yu Yureka Black
Contributors
pritish1998
Source Code: https://github.com/lineage-FE
ROM OS Version: Android 10
ROM Kernel: Linux 3.x
ROM Firmware Required: N Firmware
Based On: Lineage OS
Version Information
Status: Stable
Created 2020-09-29
Last Updated 2020-09-29
Finally Huge Update :
Changelog :
Lineage Side :
1. September Security Patch
2. Some fixes and improvements
Fan Edition side :
1. Rebranded to Lineage Fan Edition
2. Added Inbuilt App Lock from Paranoid Android
3. Added Pixel UI and Revamped Settings app
4. Revamped QS panel
5. Added Tint to QS tiles
6. Added Blur behind QS panel
7. Added Android R styled Notifications
8. Enabled advanced reboot by default
9. Moved Network traffic monitor to Right
10. Updated some icons to MD2
11. Made about phone section more clean
12. Added OOS styled navbar buttons
13. Moved IMEI Information to SIM status
14. Moved Custom DPI settings to Display Settings
15. Added VoLTE icon
16. Set QS Number of QS rows to 2
17. Added More Fonts
18. Added Pixel Blue Lineage bootanimation
19. Nuked Lineage Setup wizard
20. Disabled Screenshot delay
21. Added Simple Gallery
22. Added OnePlus calculator
23. And many more
Device Side :
1. Added Prebuilt Kimci ScreenRecorder with ability to record internal audio
2. Added Viper4A Fx (Needs magisk to work)
3. Fixed weird kernel version string
If you like my work then hit the thanks button
Update :
Click Here to View Changelog
Included fully working Google Camera Go with 1080p Video Recording, Night Mode and Portrait
Link Updated in OP
pritish1998 said:
Update :
Click Here to View Changelog
Included fully working Google Camera Go with 1080p Video Recording, Night Mode and Portrait
Link Updated in OP
Click to expand...
Click to collapse
bro, this is the best ROM for garlic at the moment, I hope you will support it
OK it's time for an update
This may be the last update for android 10
What's new?
Nothing much this time due to exams and stuff but yeah there's still something worth updating XD
- Finishing touches to overall look and feel
- Added data switch tile
- Added ability to toggle volte icon (User request)
- Added fan Edition logo to firmware info
- Added some device specific stuffs to firmware info
- Updated some Lottie Animations
- Added support for micro G
- Some refinements here and there
- May be something else IDR
Screenshots and stuff Click Here
Link updated in OP
great build :good:
Got new YU5040
Only because of this ROM, I got convinced to buy new piece of this old model.
Thanks Pritesh for all efforts.:good:
Looking to upgrade on newer version when available.
hey Sir my fingerprint senor is not Showing Up in settings, but i love this rom Awesome Rom
darkCoder221 said:
hey Sir my fingerprint senor is not Showing Up in settings, but i love this rom Awesome Rom
Click to expand...
Click to collapse
Did you try a reboot?
Also do u have n firmware installed?
pritish1998 said:
Did you try a reboot?
Also do u have n firmware installed?
Click to expand...
Click to collapse
thx Sir Now working After reboot but im having one doubt in my mind , i havnt installed twrp , i just write a command on my terminal { fastboot boot twrp.img } but after ward when i boot into recovery it is showing up Stock recovery ,even i tried fastboot flash recovery recovery.img but no change but my previous command works for temporary recovery
How can i permanently install TWRp ??
thankyou Sir
darkCoder221 said:
thx Sir Now working After reboot but im having one doubt in my mind , i havnt installed twrp , i just write a command on my terminal { fastboot boot twrp.img } but after ward when i boot into recovery it is showing up Stock recovery ,even i tried fastboot flash recovery recovery.img but no change but my previous command works for temporary recovery
How can i permanently install TWRp ??
thankyou Sir
Click to expand...
Click to collapse
Code:
fastboot flash recovery twrp.img
Here twrp.img is the name of the recovery file... I guess it's the name of the file you have
pritish1998 said:
Code:
fastboot flash recovery twrp.img
Here twrp.img is the name of the recovery file... I guess it's the name of the file you have
Click to expand...
Click to collapse
Sir I tried But Not Working ,
BUt
Code:
fastboot boot twrp.img
works for temporary boot up in twrp and im able to install UR Rom
darkCoder221 said:
Sir I tried But Not Working ,
BUt
Code:
fastboot boot twrp.img
works for temporary boot up in twrp and im able to install UR Rom
Click to expand...
Click to collapse
Man what's the name of the recovery file you have? Is it twrp.img or recovery.img?
Sorry Sir for Disturbing U again , But i Faced one more issue in this rom , whenever I call someone my screen Turns Black and never comes to its original Condition i changed my Rom but this is also same with Corvus OS
.
.
.
and thx sir rightnow im not facing any difficulty in flashing recovery
pritish1998 said:
Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
About LineageOS:
LineageOS is a free, community built, aftermarket firmware distribution of Android 10, which is designed to increase performance and reliability over stock Android for your device.
LineageOS is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. LineageOS does still include various hardware-specific code, which is also slowly being open-sourced anyway.
Fan Edition:
Lineage Fan Edition v10.69 Isotope
This is a personal project based on Lineage OS with some tiny features and UI tweaks to make it cute
Features:
All features from LineageOS
Face Unlock
App Lock
Long Screenshot
Redesigned Battery meter view
New QS Tiles Tint
Blur behind QS panel
Android R Styled Notifications
Pixel UI and Revamped Settings app
Refreshing Wallpaper
OOS Navbar Buttons
Volte Icon
Pixel Blue Lineage Bootanimation
More Accent colours
More Fonts
Lottie Animations in Settings
More Lockscreen clocks (Animated ones too)
Pebble Icon shape
Lawnchair V2 Launcher
Better Inbuilt apps
Toggle For Screenshot sound
Toggle for Three Finger Screenshot
Clean looking QS panel
4G/LTE Switch
Advanced Reboot enabled by default
Some drawables change
May be few more changes idr
For Screenshots and Stuff :Click Here
How to install:
Boot the newest TWRP .img from the Official TWRP Project Site.
Flash ROM, flash GApps (Optional)
Reboot
Download:
LineageOS Fan Edition Garlic
Kernel Source : Click Here
Lineage Source : Click Here
Fan Edition Source : Click Here
Special Thanks to
AOSPA
DotOS
Extended UI
Descendant
Project Sakura
POSP
crDroid ROM
Pixel Experience
Lineage-X
Android Sauce
Lawnchair team
Simple Mobile apps
This thread is for Lineage Fan Edition for the device : YU Yureka Black (garlic)
Device Specific Stuffs :
1. Almost everything works
2. Inbuilt Kimci Screen Recorder with Internal Audio recording
2. Inbuilt Equalizer
If you like my work then hit the thanks button
XDA:DevDB Information
Lineage Fan Edition v10.69 Isotope for Garlic, ROM for the Yu Yureka Black
Contributors
pritish1998
Source Code: https://github.com/lineage-FE
ROM OS Version: Android 10
ROM Kernel: Linux 3.x
ROM Firmware Required: N Firmware
Based On: Lineage OS
Version Information
Status: Stable
Created 2020-09-29
Last Updated 2020-09-29
Click to expand...
Click to collapse
Bro I Need Helf p I'm Using Jio Sim But .. I'm Unable to make A Call ... And I Tried from Other Phone then it Show my Phone no is Switched Off But .. My Sim is Running Net Smoothly
Sir ur build is great but I'm facing one issue I'm unable to make a call I'm using JIO sim.. Whenever I tried to make a call it just ended and .. I tried this from Someone else Phones Then .. They are saying My Phone is switched Off .. but My INTERNET is Working Smoothly. .. plz Help Me Sir ...what should I Do.
Akhilraghav065 said:
Sir ur build is great but I'm facing one issue I'm unable to make a call I'm using JIO sim.. Whenever I tried to make a call it just ended and .. I tried this from Someone else Phones Then .. They are saying My Phone is switched Off .. but My INTERNET is Working Smoothly. .. plz Help Me Sir ...what should I Do.
Click to expand...
Click to collapse
Same here.. VoLTE broke after flashing android 10 ROm (blissrom). Now I am in so much troble
Akhilraghav065 said:
Sir ur build is great but I'm facing one issue I'm unable to make a call I'm using JIO sim.. Whenever I tried to make a call it just ended and .. I tried this from Someone else Phones Then .. They are saying My Phone is switched Off .. but My INTERNET is Working Smoothly. .. plz Help Me Sir ...what should I Do.
Click to expand...
Click to collapse
Guess what. Flashed even ROMS on which VoLTE worked earlier. No luck. Flashed stock with QFIL still no luck. Finally changed jio to sim 2 and it did the trick. So now I am on stock N rom with jio in sim 2.
Can someone help me with yu yureka black telegram channel? Or updates channel to join
kunj7858 said:
Can someone help me with yu yureka black telegram channel? Or updates channel to join
Click to expand...
Click to collapse
@yuyurekablack search in telegram
pritish1998 said:
@yuyurekablack search in telegram
Click to expand...
Click to collapse
There is nothing I found

Categories

Resources