Database Users

[Q] [IdeaTab A1000F] Driver disconnects after few seconds

Hi, i need some help. I have Lenovo Ideatab A1000-F with installed TWRP recovery, but i have one problem. If i connect turned off tablet on PC, the preloader (PreLoader USB VCOM Port) driver starts, but then after few seconds disconnects and tablet starts charging trough USB ... I want to flash something (AllegroROM) to it but when i have only 2-4 seconds its kinda bad ... I have installed all kind of drivers and trying it againg and again, but nothing works. (I think the problem is that i cant remove battery to avoid charging.. or? ) Maybe screenshot helps. Please help. Thanks.
Btw sorry for my english.

adokitkat said:
Hi, i need some help. I have Lenovo Ideatab A1000-F with installed TWRP recovery, but i have one problem. If i connect turned off tablet on PC, the preloader (PreLoader USB VCOM Port) driver starts, but then after few seconds disconnects and tablet starts charging trough USB ... I want to flash something (AllegroROM) to it but when i have only 2-4 seconds its kinda bad ... I have installed all kind of drivers and trying it againg and again, but nothing works. (I think the problem is that i cant remove battery to avoid charging.. or? ) Maybe screenshot helps. Please help. Thanks.
Btw sorry for my english.
Click to expand...
Click to collapse
Hi there. sorry i can't help you with your issue.... i was just wondering if you could perhaps post how were you able to install TWRP on your a1000l-f?

linuxhost said:
Hi there. sorry i can't help you with your issue.... i was just wondering if you could perhaps post how were you able to install TWRP on your a1000l-f?
Click to expand...
Click to collapse
I found instructions on russian lenovo forum, one user have ported it and make it flashable from pc (and thats my problem - fast disconnect, so i cant flash large files - he also did his custom rom for it, but i cant flash it for my problem) . I hope i have helped PS: you must create account on that forum to show files

adokitkat said:
I found instructions on russian lenovo forum, one user have ported it and make it flashable from pc (and thats my problem - fast disconnect, so i cant flash large files - he also did his custom rom for it, but i cant flash it for my problem) . I hope i have helped PS: you must create account on that forum to show files
Click to expand...
Click to collapse
Thank you for your reply, adokitkat.

adokitkat said:
Hi, i need some help. I have Lenovo Ideatab A1000-F with installed TWRP recovery, but i have one problem. If i connect turned off tablet on PC, the preloader (PreLoader USB VCOM Port) driver starts, but then after few seconds disconnects and tablet starts charging trough USB ... I want to flash something (AllegroROM) to it but when i have only 2-4 seconds its kinda bad ... I have installed all kind of drivers and trying it againg and again, but nothing works. (I think the problem is that i cant remove battery to avoid charging.. or? ) Maybe screenshot helps. Please help. Thanks.
Btw sorry for my english.
Click to expand...
Click to collapse
well,i can give u the original rom for this A1000F and the zip that u can install it of the TWRP without all those problems,i have them installed too and i didn't had any problems,actually i didn't went to any russian page to get them.
If anyone whant those 2 files and if the moderator will let me post the links to them,i will post them and let every1 take those 2 files
actually i will ask to developers,if they want the TWRP recovery zip for this device and look into it to see how that was done,maybe someone can actually do more,maybe make the CWM for it and maybe some new custom rooms,as i said,i have the original rom too and the TWRP recovery that can be very easy installed without all this problems

Yes pls
appollokillers1 said:
well,i can give u the original rom for this A1000F and the zip that u can install it of the TWRP without all those problems,i have them installed too and i didn't had any problems,actually i didn't went to any russian page to get them.
If anyone whant those 2 files and if the moderator will let me post the links to them,i will post them and let every1 take those 2 files
actually i will ask to developers,if they want the TWRP recovery zip for this device and look into it to see how that was done,maybe someone can actually do more,maybe make the CWM for it and maybe some new custom rooms,as i said,i have the original rom too and the TWRP recovery that can be very easy installed without all this problems
Click to expand...
Click to collapse
That will be great thanks.

adokitkat said:
That will be great thanks.
Click to expand...
Click to collapse
here is the original rom to flash
http://www*upl*me/hXNuzD
just change * with .
and for the second thing,which is the TWRP recovery,u need to get a simple free app from the google pstore called Recovery Tools and once u open it,and be4 that just pass on ur sd card this file,or on the usb internal memory the next file,just tap on the first line on the screen,in that app and load that file and executed,will finish pretty fast and don't even need to reboot,but when u get in the recovery mode,u will see the TWRP recovery mod and not the usual
download the file from here
http://www*upl*me/4MI55G
just change the * with .
If anyone can do at least a custom rom that will look different than the stock rom,i will thank him for life

appollokillers1 said:
here is the original rom to flash
http://www*upl*me/hXNuzD
just change * with .
and for the second thing,which is the TWRP recovery,u need to get a simple free app from the google pstore called Recovery Tools and once u open it,and be4 that just pass on ur sd card this file,or on the usb internal memory the next file,just tap on the first line on the screen,in that app and load that file and executed,will finish pretty fast and don't even need to reboot,but when u get in the recovery mode,u will see the TWRP recovery mod and not the usual
download the file from here
http://www*upl*me/4MI55G
just change the * with .
If anyone can do at least a custom rom that will look different than the stock rom,i will thank him for life
Click to expand...
Click to collapse
Russian guy did .. if do you want i would send you link in pm .. But its file to flash as i wrote

adokitkat said:
Russian guy did .. if do you want i would send you link in pm .. But its file to flash as i wrote
Click to expand...
Click to collapse
i know that that file is wrong,the 1 of the russian,but the 2 that i've posted the links r right,not wrong,i used them and i have no problems at all of any kind,why would i want a flash rom that will give me something foulty ? better to have something that really works and are good.
oh,i forgot to mention that for the second zip file to install it,u need to have the device rooted and u can do it easy with a program called Kingo Android Root
i've seen that russian guy tryed to do something and i am happy that some1 did,but why using something that will give u problems ?

appollokillers1 said:
i know that that file is wrong,the 1 of the russian,but the 2 that i've posted the links r right,not wrong,i used them and i have no problems at all of any kind,why would i want a flash rom that will give me something foulty ? better to have something that really works and are good.
oh,i forgot to mention that for the second zip file to install it,u need to have the device rooted and u can do it easy with a program called Kingo Android Root
i've seen that russian guy tryed to do something and i am happy that some1 did,but why using something that will give u problems ?
Click to expand...
Click to collapse
It was ok for them, i dont know why not for me .. At least it worked one time.. And i never heard of it, i was trying to use all common root programs and nothing .. I will check it out, thanks

TWRP link is down, mind passing on a new one

Back function U-touch button stopped working after CyanogenMod update

Last night my Zuk prompted a CyanogenMod update , which I installed. Now, the back function of the home button (by just touching it, not pressing) doesn't work anymore. Any ideas on how to fix this ?

Same here, no solution found ATM :/

I-Immortal said:
Same here, no solution found ATM :/
Click to expand...
Click to collapse
You guys should report all bugs to the cyanogenOS forum here -> http://community.cyngn.com/c/devices/z1
If they don´t know about the bugs, they can´t fix it.
And while you are at it raise your voice here (because we need inbuild root ) -> http://community.cyngn.com/t/reques...ring-and-inbuilt-superuser-access/97/4?u=othe

Wow nice thank you ! I didn't know where the official support was ^^

U touch buttons not funtioning
Pontifex007 said:
Last night my Zuk prompted a CyanogenMod update , which I installed. Now, the back function of the home button (by just touching it, not pressing) doesn't work anymore. Any ideas on how to fix this ?
Click to expand...
Click to collapse
Any idea will factory resetting get the u touch buttons to work? Or are u waiting for an update?

Sydarij said:
Any idea will factory resetting get the u touch buttons to work? Or are u waiting for an update?
Click to expand...
Click to collapse
I dont think resetting will help. I'm just waiting till the next update, or the big update to 6.0 Marshmallow early next year. Really weird that they haven't fixed it yet, shouldnt be that difficult..

They dummied it out on the fingerprint_client and kernel binary... I've been tracking this issue down all day already. Theoretically, swapping the zImage for an older one, along with an older fingerprint_client binary should fix the issue.
Edit: Got it running on the latest COS again after a few patches here and there... will post a flashable boot.img soon.
Edit2: Here you go, all patched up and ready to go. Just flash it via fastboot and you will get your back-button functionality back. https://www.androidfilehost.com/?fid=24269982087008212

MrColdbird said:
They dummied it out on the fingerprint_client and kernel binary... I've been tracking this issue down all day already. Theoretically, swapping the zImage for an older one, along with an older fingerprint_client binary should fix the issue.
Edit: Got it running on the latest COS again after a few patches here and there... will post a flashable boot.img soon.
Edit2: Here you go, all patched up and ready to go. Just flash it via fastboot and you will get your back-button functionality back.
Click to expand...
Click to collapse
Thanks! Do you know if this will work with CyanogenMod? Not CyanogenOS

Gabriü said:
Thanks! Do you know if this will work with CyanogenMod? Not CyanogenOS
Click to expand...
Click to collapse
should we wait for an update? there's not one issue im facing with the zuk z1. there are many like:
-the back button on the home key soft touch is not working
-the capacitive touch button on the left is much brighter than the right one hence not equal
-the swipe right or left to switch b/w apps on the home key is not working

Sydarij said:
should we wait for an update? there's not one issue im facing with the zuk z1. there are many like:
-the back button on the home key soft touch is not working
-the capacitive touch button on the left is much brighter than the right one hence not equal
-the swipe right or left to switch b/w apps on the home key is not working
Click to expand...
Click to collapse
I don't know, I personally believe that they removed the feature on purpose because I was able to use it when I first bought the phone..

U touch soft touch button not working
Gabriü said:
I don't know, I personally believe that they removed the feature on purpose because I was able to use it when I first bought the phone..
Click to expand...
Click to collapse
they have removed it... im still waiting for an update. pretty frustrated they removed it so early when i just bought it a week ago! Arghhh!

Just use the boot image I've posted to temporarily restore it.
The OnePlus 2 kernel sources contain a patched fingerprint driver that is compatible with the Z1 that contains the capacitive navigation that got stripped.
It's already being picked up / ported for the Chroma kernel so don't worry guys, on the long run we will get this feature back permanently (no matter what Cyanogen wants).

MrColdbird said:
Just use the boot image I've posted to temporarily restore it.
The OnePlus 2 kernel sources contain a patched fingerprint driver that is compatible with the Z1 that contains the capacitive navigation that got stripped.
It's already being picked up / ported for the Chroma kernel so don't worry guys, on the long run we will get this feature back permanently (no matter what Cyanogen wants).
Click to expand...
Click to collapse
I can't answer on the official thread as I don't have more than 10 posts, anyway, thanks for the feature, I tested it on CM12.1-Nightly and it works like a charm! Unfornately i noticed that after flashing the zip, on "buttons" settings, the "enable on screen nav bar" option has disappeared, and I can't go turn them off. Also the functionality is not the same as when i bought it, in fact if I touched the button, it would use the back feature instead of going on the home screen.
Anyway, thanks again!

You can adjust the actions that occur by editing the Generic.kl file included with the installer zip file. Adjust them as needed / wanted.

Hi , thx alot for ur patch .
Got some questions :
1. How can i programm button myself ?
2. How can i uninstall that patch ?

MrColdbird
thank you very much. finger prints sensor works as back button again. great job.
---------- Post added at 09:25 PM ---------- Previous post was at 09:21 PM ----------
Gonzaman said:
Hi , thx alot for ur patch .
Got some questions :
1. How can i programm button myself ?
2. How can i uninstall that patch ?
Click to expand...
Click to collapse
You can use 3rd party programs from playstore. for example"flashify". save the patch to internal store by usb. install flashify. find the path of yog4pas3oh....img and set up. after reboot it will work. Also you can unistall it from setting/ applications

sadrettin said:
MrColdbird
thank you very much. finger prints sensor works as back button again. great job.
---------- Post added at 09:25 PM ---------- Previous post was at 09:21 PM ----------
You can use 3rd party programs from playstore. for example"flashify". save the patch to internal store by usb. install flashify. find the path of yog4pas3oh....img and set up. after reboot it will work. Also you can unistall it from setting/ applications
Click to expand...
Click to collapse
install it on your zuk and try to uninstall it by your ways .

zuk z1 home button issue
please can u help me to flash my device. im doing it for the first time.. i have installed flashify from playstore.. now can u tell me what to do step by step. thanks!

Sydarij said:
please can u help me to flash my device. im doing it for the first time.. i have installed flashify from playstore.. now can u tell me what to do step by step. thanks!
Click to expand...
Click to collapse
Hi,
1- plug your usb cable to your pc.
2- download the file "YOG4PAS3OH_backbuttonenabled_boot.img" which uploaded by MrColdbird.
3- copy the file to zuk z1s internal store.
4- open flashify. choose "recovery image", choose file manager, find and choose the "YOG4PAS3OH_backbuttonenabled_boot.img"
5-program asks you flash recovery? and choose YUP.
6- after rebooting your touch backbutton will work with permission of God.
But I offer another upload of Mrcoldbird. Because extra properties come by it.
" Left swipe: Back
Right swipe: Recent Apps
Tap: Home"
http://forum.xda-developers.com/zuk...rint-touch-t3262388/post64128662#post64128662

sadrettin said:
Hi,
1- plug your usb cable to your pc.
2- download the file "YOG4PAS3OH_backbuttonenabled_boot.img" which uploaded by MrColdbird.
3- copy the file to zuk z1s internal store.
4- open flashify. choose "recovery image", choose file manager, find and choose the "YOG4PAS3OH_backbuttonenabled_boot.img"
5-program asks you flash recovery? and choose YUP.
6- after rebooting your touch backbutton will work with permission of God.
But I offer another upload of Mrcoldbird. Because extra properties come by it.
" Left swipe: Back
Right swipe: Recent Apps
Tap: Home"
http://forum.xda-developers.com/zuk...rint-touch-t3262388/post64128662#post64128662
Click to expand...
Click to collapse
Flashify keeps crashing on my Zuk.. weird !

Found L14 Honor 8 B320 Update... What do I do now?

So, I found the OTA update packages for the FRD-L14 to B320 (and B317)
I really wanted to update... but I'm not sure how.
I'm rooted, with TWRP and SuperSU installed, and it all works ok.
I didn't want to do any hard methods, scared of bricking it. Updating the OTA over SD card isn't working (can't even find the setting)
So what to do?
They are only OTA updates, not Full, so I can't just use dload method to load them up.
I would prefer to keep root, but if I have to reflash to stock, and then re-root, I can do that.
Any other methods I can use? Can anyone with a bit more knowledge help me out?
And of course, more than happy to share the OTA files, one is approximately 3gb (B317) and the other is about 300mb (B320)
Thanks

Unroot phone and flash stock recovery

Will that work? I tried doing that but the updater didn't find the update in the SD card. It told me there were no updates available.

SolarisSixth said:
Will that work? I tried doing that but the updater didn't find the update in the SD card. It told me there were no updates available.
Click to expand...
Click to collapse
what is you full model no ?
FRD-L14C???B???

chongns said:
what is you full model no ?
FRD-L14C???B???
Click to expand...
Click to collapse
L14C567B162
The update seemed to be the right one, whether it actually was or not, not completely sure.

SolarisSixth said:
L14C567B162
The update seemed to be the right one, whether it actually was or not, not completely sure.
Click to expand...
Click to collapse
you need to make sure the zip file you get are the right one.
since your have TWRP, just flash the update.zip and the update_hw_usa.zip Link without reboot in between.

i updated to 5.0 (320) on my L14, i don't suggest you to upgrade if you need Bluetooth. Everything works fine except Bluetooth. And if you need tutorials and all roms, just reply me i will send to you.

fuyucn said:
i updated to 5.0 (320) on my L14, i don't suggest you to upgrade if you need Bluetooth. Everything works fine except Bluetooth. And if you need tutorials and all roms, just reply me i will send to you.
Click to expand...
Click to collapse
Thanks, I appreciate the help.
I flashed the update.zip that I found, but it just bricked my phone, I had to flash an older version to get it working.
Would you be able to point me at the correct update.zip? I don't want to try flashing the same one, and having it fail.

chongns said:
you need to make sure the zip file you get are the right one.
since your have TWRP, just flash the update.zip and the update_hw_usa.zip Link without reboot in between.
Click to expand...
Click to collapse
I was pretty sure it was the right one, at least it seemed to be. Thanks for the hw_usa.zip file, could you point me towards the correct update.zip?
I flashed the one I had with twrp, but it seemed to fail, and caused a brick. So I wouldn't want to flash the same version, especially since it seemed to not work.

SolarisSixth said:
Thanks, I appreciate the help.
I flashed the update.zip that I found, but it just bricked my phone, I had to flash an older version to get it working.
Would you be able to point me at the correct update.zip? I don't want to try flashing the same one, and having it fail.
Click to expand...
Click to collapse
You need two roms:
http://update.hicloud.com:8180/TDS/...68/f1/full/hw/usa/update_data_full_hw_usa.zip
AND
http://update.hicloud.com:8180/TDS/data/files/p3/s15/G1278/g104/v68368/f1/full/update.zip
Steps:
1. unlock, rooted and twrp
2. then twrp, install the usa.zip, dont reboot
3. flash update.zip (if some errs shows , just miss them.)
Also don't wipe data & cache
4. reboot, if you cannot show correct build num in 'About'
, just use the *#*#2846579#*#*, and use software upgrade to flash update.app from both usa.zip and update.zip.
5. Everything will woke

fuyucn said:
You need two roms:
http://update.hicloud.com:8180/TDS/...68/f1/full/hw/usa/update_data_full_hw_usa.zip
AND
http://update.hicloud.com:8180/TDS/data/files/p3/s15/G1278/g104/v68368/f1/full/update.zip
Steps:
1. unlock, rooted and twrp
2. then twrp, install the usa.zip, dont reboot
3. flash update.zip (if some errs shows , just miss them.)
Also don't wipe data & cache
4. reboot, if you cannot show correct build num in 'About'
, just use the *#*#2846579#*#*, and use software upgrade to flash update.app from both usa.zip and update.zip.
5. Everything will woke
Click to expand...
Click to collapse
Thanks, gonna give it a try right now. Will report back with results.
I was missing the hw_usa.zip file. As an educational experience, what is that file?

SolarisSixth said:
Thanks, gonna give it a try right now. Will report back with results.
I was missing the hw_usa.zip file. As an educational experience, what is that file?
Click to expand...
Click to collapse
that is honor8's hardware code and support library of Android 7.x. You can understand it as hardware firmware for honor 8. and update.zip is system and software part. In order to make software part works, you need correct hardware firmware.

fuyucn said:
that is honor8's hardware code and support library of Android 7.x. You can understand it as hardware firmware for honor 8. and update.zip is system and software part. In order to make software part works, you need correct hardware firmware.
Click to expand...
Click to collapse
Ahh, that makes perfect sense. Thank you.
I had tried to update it via twrp before, and when that failed, just tried dload method, and neither one worked. I didn't have the hw_usa file.
I appreciate the help, and just running a backup before I go ahead and flash.

Thanks, it worked great! Any tips on how to re-root? I need the new SuperSU version, right?

fuyucn said:
i updated to 5.0 (320) on my L14, i don't suggest you to upgrade if you need Bluetooth. Everything works fine except Bluetooth. And if you need tutorials and all roms, just reply me i will send to you.
Click to expand...
Click to collapse
Bluetooth is working fine for me on FRD-L14 on B320. That probably means you flashed the wrong file or an incorrect version.

dmband64 said:
Bluetooth is working fine for me on FRD-L14 on B320. That probably means you flashed the wrong file or an incorrect version.
Click to expand...
Click to collapse
Do you use L14C567B320 68368, or others? Could you post the links of HW and update.zip to me?
---------- Post added at 11:58 PM ---------- Previous post was at 11:55 PM ----------
SolarisSixth said:
Thanks, it worked great! Any tips on how to re-root? I need the new SuperSU version, right?
Click to expand...
Click to collapse
Currently, there is no way to re root and install twrp. there is a post:
http://forum.xda-developers.com/honor-8/how-to/twrp-nougat-edition-t3504140
It shows how to install twrp on 7.0 and root. Not work for me, so i give up this part, just enjoy the original Emui 5

fuyucn said:
Do you use L14C567B320 68368, or others? Could you post the links of HW and update.zip to me?
Click to expand...
Click to collapse
I updated through the charles app. I am not rooted with custom recovery. Here is a link to the thread that details how I did it, with the original firmware link for the version I'm on.
http://forum.xda-developers.com/showpost.php?p=70104907&postcount=233

fuyucn said:
Do you use L14C567B320 68368, or others? Could you post the links of HW and update.zip to me?
---------- Post added at 11:58 PM ---------- Previous post was at 11:55 PM ----------
Currently, there is no way to re root and install twrp. there is a post:
http://forum.xda-developers.com/honor-8/how-to/twrp-nougat-edition-t3504140
It shows how to install twrp on 7.0 and root. Not work for me, so i give up this part, just enjoy the original Emui 5
Click to expand...
Click to collapse
Hmm, it seems to have worked for me, but I seem to be running into some issues. It might have failed for me too.
I HAVE to replace some of these default apps. Some of them are truly awful, not to mention I have to uninstall some.

dmband64 said:
I updated through the charles app. I am not rooted with custom recovery. Here is a link to the thread that details how I did it, with the original firmware link for the version I'm on.
http://forum.xda-developers.com/showpost.php?p=70104907&postcount=233
Click to expand...
Click to collapse
thanks, i will try it.

Which TWRP you used for the FRD-L14

Full stock ROM to flash

Hi,
I have Axon 7 A2017 China. I'm looking for a full stock ROM to flash using TWRP.
My Axon is not booting to Android but I can boot to TWRP. I was on 7.1 before it stopped booting. It stopped after I attempted to flash Open GApps which failed buy then the phone stopped booting.
I was looking a lot for the full ROM but can't find it.
Any other suggestions to get the phone working again are welcome.
Thanks,

Edit: im stupid. Sorry, was to late yesterday.

Spillunke said:
B19-NOUGAT_FULL (Nougat 7.1.1)
This will install the entirety of the B19-NOUGAT firmware and boot stack, including signed OEM system and boot. OTA capable and unlocks fastboot operations.
https://build.nethunter.com/misc/axon7/A2017U_B19-NOUGAT_FULL_EDL.zip
Click to expand...
Click to collapse
What? That's for the U!
Don't flash that or you can get your phone bricked in the worst case.
---------- Post added at 10:33 PM ---------- Previous post was at 10:29 PM ----------
alxla said:
Hi,
I have Axon 7 A2017 China. I'm looking for a full stock ROM to flash using TWRP.
My Axon is not booting to Android but I can boot to TWRP. I was on 7.1 before it stopped booting. It stopped after I attempted to flash Open GApps which failed buy then the phone stopped booting.
I was looking a lot for the full ROM but can't find it.
Any other suggestions to get the phone working again are welcome.
Thanks,
Click to expand...
Click to collapse
You can find the A2017 stock ROMs on 4PDA. Go to the 4th categ brick repair manual, click on the link that says 'Miflash and drivers', and open one of the spoilers (no need to translate, it's straightforward) (i think it's the 2nd spoiler). Then download one of the images such as A2017_Bxx_NOUGAT_FULL_EDL. But BE SURE that it's for your phone!
If you want google stuff on your phone look for Xiaomi's 'Google Installer'. it'll just download the apks and prompt you to install them, and you'll get google

Choose an username... said:
What? That's for the U!
Don't flash that or you can get your phone bricked in the worst case.
---------- Post added at 10:33 PM ---------- Previous post was at 10:29 PM ----------
You can find the A2017 stock ROMs on 4PDA. Go to the 4th categ brick repair manual, click on the link that says 'Miflash and drivers', and open one of the spoilers (no need to translate, it's straightforward) (i think it's the 2nd spoiler). Then download one of the images such as A2017_Bxx_NOUGAT_FULL_EDL. But BE SURE that it's for your phone!
If you want google stuff on your phone look for Xiaomi's 'Google Installer'. it'll just download the apks and prompt you to install them, and you'll get google
Click to expand...
Click to collapse
I visited the website 4pda. I couldn't find the ROM.

alxla said:
I visited the website 4pda. I couldn't find the ROM.
Click to expand...
Click to collapse
there you go
http://4pda.ru/pages/go/?u=https://...ex.php?showtopic=814221&st=0#Spoil-58320909-3

Choose an username... said:
there you go
http://4pda.ru/pages/go/?u=https://...ex.php?showtopic=814221&st=0#Spoil-58320909-3
Click to expand...
Click to collapse
Thank you so much.
Do you happen to have a link to the Xiaomi GApps installer too? I will look it up in any case.
Thank you again.

alxla said:
Thank you so much.
Do you happen to have a link to the Xiaomi GApps installer too? I will look it up in any case.
Thank you again.
Click to expand...
Click to collapse
Just google it. You can find it on pretty decent-looking hosting sites actually

Choose an username... said:
Just google it. You can find it on pretty decent-looking hosting sites actually
Click to expand...
Click to collapse
I can't flash the ROM I downloaded from the URL you posted earlier using TWRP. I can't boot in EDL mode either. I'm New to this, can you give done pointers?
Thanks

alxla said:
I can't flash the ROM I downloaded from the URL you posted earlier using TWRP. I can't boot in EDL mode either. I'm New to this, can you give done pointers?
Thanks
Click to expand...
Click to collapse
Well you obviously can't flash it via TWRP since it's a MiFlash package lol - to flash stuff in MiFlash you don't use zips, you use folders. Take the zip you downloaded and unzip it somewhere on your PC. Download MiFlash and
You need to go to TWRP, then from your PC issue 'adb reboot edl'. the phone will look like it's off but it's not. Open MiFlash, select the folder you unzipped (if you open that folder and you find only one folder inside, select that one) and press Flash or Start or whatever the start button is

Mi A1 | Unroot | Install STOCK ROM

Mi A1 | Unroot | Install STOCK ROM
=======
Hi,
Currently I am using AOSP Extended ROM ( Android 8.1) in my Mi A1.
Somebody please provide the steps to relock the bootloader and install Stock Rom ( Android One 8.1 ).
Also provide the link to download the Stock Rom.
Thanks in avdance. :good:
=========

arunrajr said:
Mi A1 | Unroot | Install STOCK ROM
=======
Hi,
Currently I am using AOSP Extended ROM ( Android 8.1) in my Mi A1.
Somebody please provide the steps to relock the bootloader and install Stock Rom ( Android One 8.1 ).
Also provide the link to download the Stock Rom.
Thanks in avdance. :good:
=========
Click to expand...
Click to collapse
Flash it normally with miflash tool, and choose clean all + lock

Felixlix45 said:
Flash it normally with miflash tool, and choose clean all + lock
Click to expand...
Click to collapse
Could you please provide me the exact steps or any link ? I am confused also provide me the downloading link for STOCK rom. I have gone through many links but not working properly.

arunrajr said:
Could you please provide me the exact steps or any link ? I am confused also provide me the downloading link for STOCK rom. I have gone through many links but not working properly.
Click to expand...
Click to collapse
I'll help u but before we start here is a disclaimer:
DOING THIS WILL CLEAN UP UR PHONE SO DONT BLAME ME WHEN UR DATA IS GONE!
BUT, u can enable google backuping so it will backup MOST of ur stuff, now lets start
download the stock rom from here: http://en.miui.com/download-333.html
and download this tool: http://en.miui.com/forum.php?mod=at...yYzJhMXwxNTM1NDI2MDE3fDIyNTA2MTkxMTB8ODA3MjUy
decompress the zip even if u dont actually see that anything is inside when u open it from winrar
then reboot ur phone to bootloader mode and start the tool
click on refresh in the tool and u should see ur phone string
then click on browse and take it to this folder
tissot_images_V9.6.4.0.ODHMIFE_20180712.0000.00_8.0_735823083f\tissot_images_V9.6.4.0.ODHMIFE_8.0
matters what u chose it might be just: tissot_images_V9.6.4.0.ODHMIFE_8.0
then in the bottom right make sure its clean all and lock
and then press on flash and wait, i heard someone say they bricked their phone when they flashed using miflash because a power outage happend and the proccess stopped so make sure u dont accidentally unplug ur phone from the pc
when finished the phone will auto restart itself and u should be having stock rom, I hope I helped u
if u have any questions I'll be glad to answer them if I can

YayJohn said:
I'll help u but before we start here is a disclaimer:
DOING THIS WILL CLEAN UP UR PHONE SO DONT BLAME ME WHEN UR DATA IS GONE!
BUT, u can enable google backuping so it will backup MOST of ur stuff, now lets start
download the stock rom from here: http://en.miui.com/download-333.html
and download this tool: http://en.miui.com/forum.php?mod=at...yYzJhMXwxNTM1NDI2MDE3fDIyNTA2MTkxMTB8ODA3MjUy
decompress the zip even if u dont actually see that anything is inside when u open it from winrar
then reboot ur phone to bootloader mode and start the tool
click on refresh in the tool and u should see ur phone string
then click on browse and take it to this folder
tissot_images_V9.6.4.0.ODHMIFE_20180712.0000.00_8.0_735823083f\tissot_images_V9.6.4.0.ODHMIFE_8.0
matters what u chose it might be just: tissot_images_V9.6.4.0.ODHMIFE_8.0
then in the bottom right make sure its clean all and lock
and then press on flash and wait, i heard someone say they bricked their phone when they flashed using miflash because a power outage happend and the proccess stopped so make sure u dont accidentally unplug ur phone from the pc
when finished the phone will auto restart itself and u should be having stock rom, I hope I helped u
if u have any questions I'll be glad to answer them if I can
Click to expand...
Click to collapse
====
It works !!!!
Thank you soo much :good:
=====

arunrajr said:
====
It works !!!!
Thank you soo much :good:
=====
Click to expand...
Click to collapse
Np click on the thanks button if it helped u

And may i ask, how if I wanted to re Root back? I mean from this latest rom android One 8.1.0 oreo.
Is it same step as i before this rooting from Nougat 7.1.2

iki_fly4862 said:
And may i ask, how if I wanted to re Root back? I mean from this latest rom android One 8.1.0 oreo.
Is it same step as i before this rooting from Nougat 7.1.2
Click to expand...
Click to collapse
I dont get what you are asking, are you asking how to root 7.1.2?

YayJohn said:
I dont get what you are asking, are you asking how to root 7.1.2?
Click to expand...
Click to collapse
I meant how to root the 8.1.0

iki_fly4862 said:
I meant how to root the 8.1.0
Click to expand...
Click to collapse
Yes, it should be the same, just when you flash the rom (if you do) flash magisk before opengapps

Should i flash twrp by cosmic dan in case i don't want to lose my twrp Everytime i flash rom?

iki_fly4862 said:
Should i flash twrp by cosmic dan in case i don't want to lose my twrp Everytime i flash rom?
Click to expand...
Click to collapse
yes

YayJohn said:
I'll help u but before we start here is a disclaimer:
DOING THIS WILL CLEAN UP UR PHONE SO DONT BLAME ME WHEN UR DATA IS GONE!
BUT, u can enable google backuping so it will backup MOST of ur stuff, now lets start
download the stock rom from here: http://en.miui.com/download-333.html
and download this tool: http://en.miui.com/forum.php?mod=at...yYzJhMXwxNTM1NDI2MDE3fDIyNTA2MTkxMTB8ODA3MjUy
decompress the zip even if u dont actually see that anything is inside when u open it from winrar
then reboot ur phone to bootloader mode and start the tool
click on refresh in the tool and u should see ur phone string
then click on browse and take it to this folder
tissot_images_V9.6.4.0.ODHMIFE_20180712.0000.00_8.0_735823083f\tissot_images_V9.6.4.0.ODHMIFE_8.0
matters what u chose it might be just: tissot_images_V9.6.4.0.ODHMIFE_8.0
then in the bottom right make sure its clean all and lock
and then press on flash and wait, i heard someone say they bricked their phone when they flashed using miflash because a power outage happend and the proccess stopped so make sure u dont accidentally unplug ur phone from the pc
when finished the phone will auto restart itself and u should be having stock rom, I hope I helped u
if u have any questions I'll be glad to answer them if I can
Click to expand...
Click to collapse
I have rooted Mi A1 and using Resurrection Remix OS. I have rooted device with Megisk and also installed TWRP recovery. Now I want to back to stock rom, so how to unroot my device and what I have to take care while doing this (about magisk and twrp). Please suggest me the good video or steps in brief because I don't know much about such things.

jaybusa said:
I have rooted Mi A1 and using Resurrection Remix OS. I have rooted device with Megisk and also installed TWRP recovery. Now I want to back to stock rom, so how to unroot my device and what I have to take care while doing this (about magisk and twrp). Please suggest me the good video or steps in brief because I don't know much about such things.
Click to expand...
Click to collapse
Just do what I told you in the steps.... Also much better than a vid because they don't go straight to the point

YayJohn said:
Just do what I told you in the steps.... Also much better than a vid because they don't go straight to the point
Click to expand...
Click to collapse
Hello, I am using TWRP recovery, so can I get OTA update after I unroot my phone?

jaybusa said:
Hello, I am using TWRP recovery, so can I get OTA update after I unroot my phone?
Click to expand...
Click to collapse
I dont know much about ota so I don't know, just Google search or make a post

How long does this process usually take? I started the flashing process on my mi a1 20 minutes ago and for the last 15 minutes it has just been bootlooping it seems...
EDIT: So in an attempt to restart the fastboot (volume and power button) it seems I have finished the flashing process. (In case someone else has this problem)

Hi All.
Getting this error while flashing.
Please help ASAP.

Chimax said:
Hi All.
Getting this error while flashing.
Please help ASAP.
Click to expand...
Click to collapse
Is there any chance you deleted or not extracted all the files
---------- Post added at 09:47 AM ---------- Previous post was at 09:46 AM ----------
JamesKont said:
How long does this process usually take? I started the flashing process on my mi a1 20 minutes ago and for the last 15 minutes it has just been bootlooping it seems...
EDIT: So in an attempt to restart the fastboot (volume and power button) it seems I have finished the flashing process. (In case someone else has this problem)
Click to expand...
Click to collapse
It only takes 4 minutes max