Need Urgent help!
My Lenovo A6000Plus is soft bricked. It was running Android Kitkat & I did not update to Lollipop, also USB debugging is not enabled. Phone won't boot, can't go to recovery mode. I can go to download mode that's it. please give me some suggestion. I tried to research in the forums, but there are lot of threads, I don't know which is the right one for me.
Device information:
Model: Lenovo A6000 Plus.
Related
Wiped out OS by mistake in twrp and after some tweaking, finally, managed to brick my phone. when i switch it on, i can only see a set of vertical lines on the screen. is there a way to unbrick the phone?
tried all the methods shown in other threads. no thread shows the method to unbrick.
and again, the display is not working. pls help!
Its an bootloader crash bro#
Hi Everyone,
My tablet is Lenovo B8080-F model, 16GB with Wifi. I got it rooted and installed TWRP on it. I was so over excited about this and wanted to flash custom ROMs on it. I searched and could not get the proper ROM for the B8080-F, in my eagerness, I decided to flash the ROM for Lenovo A3000. Since then my tablet could not boot up again. It got stuck at the Lenovo logo. My windows system can still detect the tablet when plugged to the PC, but ADB DEVICES command shows nothing.
I need help. I need step-by-step guides on how to revive the tablet. I appreciate.
Muyiwa.
Update:
My PC can detect the device. It is shown as Android ADB Interface under Windows Device Manager. There is no COM Port.
If I type: adb devices
Response: ? Unauthorized.
Please help!
Thanks.
Muyiwa.
Ouch
Me too, i need help
I actually have such an tablet lying around. Haven't been used in five years. Never got custom ROMs, right? I don't think Lenovo ever bothered to upgrade from Kitkat.
@[email protected]
@Mirage20000C
I have this Lenovo A328 which suddenly had multiple and continuous gapps crashes. I tried to do a factory reset but the problem still existed. I decided to flash the stock rom using SP Flash Tool. Flashing the stock rom succeeded but then after, the device does not charge nor boot up. It does not even respond to vol up(or down) + power which brings up a menu for testing the device(not recovery). I tried to format it first before flashing but the result is still the same. I also tried flashing stock rom from different source. Any idea on this one?
Update
I tried to flash a stock rom on my Lenovo A328 with SP Flash Tool but the process was interrupted and now after I flashed the stock rom successfully, the phone won't charge nor boot, not even to recovery. I noticed in my EMMC Flash that the sizes of GP1 - 4 are all 0x0.
I found a solution in here,
http://forum.xda-developers.com/show....php?t=2792667
It says that I have to flash the rom using DOWNLOAD first and then flash it again with FIRMWARE UPGRADE. I'm already at the FIWMWARE UPGRADE process but I got this error
Failed to get PMT info.
Click to expand...
Click to collapse
Can anyone please help me fix the phone? It will be highly appreciated.
Hi,
You can try format all+download option of spflashtool. I can send you the firmware for Lenovo a328 if you want.
Same problem here, any advice ?
You can try format all+download option of spflashtool. I can send you the firmware for Lenovo a328 if you want. Yes i want.
Lenovo a328
Plz send the firmware for Lenovo a328
Hi All,
I have the same problem
did you find any solution?
I want the firmware for Lenovo a328
lenovo a328 not turning on even I successfully flash sa firmware
same problem here.
someone can help?
need some help to resurrect my lenovo a328.
if I format it, there's an error 5073.
Hi, I am having the same problem. Could you help?
Hello everyone!
I am facing the same problem!!!
Tried almost all the solutions suggested on different sites or forums, nothing works, still no charge and no start...
Change the PC, the USB cables, drivers, ROM's, you name it... Someone said this MTK devices are hard to brick but still, why we cannot revive our devices??? Hardware failure? Not really according to some technicians as long your phone is detected by the pc in device manager, the phone CAN be "unbricked".
SO, we are missing something, we doing something wrong???
We need help.... SOMEONE???
please send me the firmware
I have the same problem about my lenovo a328. After flashing, it's not booting and turning on. It's not even charging. So what I did is I tried to firmware upgrade it and I got this ''failed to get PMT info'' alert. Someone know how to revive this phone?
I got 2 phones and they've bricked themselves
Hi,
I got 2 Lenovo A328s and they've bricked themselves, having the same symptoms.
I can get them to boot in Recovery, and I am waiting to download an image to sideload with ADB, which seems to work.
One of them was still in use, but had software glitches, like the camera driver not working in any app.
The other one was replaced 10 months ago, but after long time, it also bricked.
I haven't attempted any flash of new firmware.
I have the same problem, the phone isn't charging and I can't use vol up+ power buttons.
Can you send me the software please and some instructions?
guys i have softbricked my lenovo a6000 and its stucked on lenovo logo
i have tried adb method to flash back recovery mode but when i rum commands it gives error == device null found
when i connect my device to pc it makes an connected sound help me out of this as this is the only mobile i was having
plzzzzzzzzzz guyzzhelp me out
Bro need help I installed twrp and then cm 13 on my a6000 and by mistake I deleted backup of my stock kk rom and now when I try to go in download mode, recovery it doesn't open it show only Lenovo logo . By mistake I flashed a6000+ stock recovery and after that when I try to flash stock recovery of a6000 using adb nothing open .. so now nothing download mode or recovery mode is opening but i still boot into cm13 how solve it to revert back to kk ?
Solution
Shubhamraaj said:
guys i have softbricked my lenovo a6000 and its stucked on lenovo logo
i have tried adb method to flash back recovery mode but when i rum commands it gives error == device null found
when i connect my device to pc it makes an connected sound help me out of this as this is the only mobile i was having
plzzzzzzzzzz guyzzhelp me out
Click to expand...
Click to collapse
I had also stuck in boot logo once in a custum ROM .
but i fixed it : steps .
Download twrp recovery in your pc. ( rename it as twrp.img ) ,
Boot your phone in to fastboot mode .,
Make sure ur pc has ADB drivers ,
Once , phone get into fastboot mode ,
Type this Commands : 1)fastboot devices ( to check if ur phone is getting detected or not , if it shows no device found , check connection )
2) fastboot flash recovery twrp.img ( to flash recovery)
3) fastboot reboot recovery ( to boot into recovery )
4) download any ROM to SD card and flash it from recovery.
Hit thanks button if this helped you.
Hello guys I have a6000 (Lenovo)
But my problem I saw this video
. Which is easy to revert back to kk rom but I have installed twrp which is not useful for above video method .so when I try to to install Philly or cwm which is used in above video it not installing only twrp will installing other custom recoveries not installing so please help me!!! If anybody have the twrp backup of stock kk rom of a6000 please send me!!
My lenovo a6000 also got stock on boot logo in a custom rom. Its now in no use. Now when i try to connect ut to my pc, its only charging. My device is not being connected to pc. Now what to do ??
Androidsabya said:
My lenovo a6000 also got stock on boot logo in a custom rom. Its now in no use. Now when i try to connect ut to my pc, its only charging. My device is not being connected to pc. Now what to do ??
Click to expand...
Click to collapse
FOLLOW THIS
Need help
sasukay said:
FOLLOW THIS
Click to expand...
Click to collapse
Actually 1st i did root my lenovo a6000. Then i was trying to install cyanogen rom through sd card. But it showed e verification failed. And while booting it gets stock showing cyanogen logo. I tried my phone to connect to pc, but it only charges my phone but doesn't show up in connected device in my laptop. I went to an mobile repair shop, bcoz i thought may be i was missing something. But after visiting 3 repair shops, they also couldn't solve my problem. Now how can i get my mobile to back condition ? Need help. If anyone can help plz give quick rply. But i need to talk to someone who can help regarding this issue. So if you can talk to me, plz call me 7008678740. Thank. Plz give response.
New problem arrised
sasukay said:
FOLLOW THIS
Click to expand...
Click to collapse
I could successfully restored my lenovo a6000 kitkat rom. But a new problem arrised. When i try to power on, it just starts for 2 seconds and vanishes immediately just showing the lenovo logo. Again n again it just being on and off. When i put this battery in another a6000 plus mobile, the same problem occurs. I mean , i want to know why is this happening ? Is the battery gone !!!
Androidsabya said:
I could successfully restored my lenovo a6000 kitkat rom. But a new problem arrised. When i try to power on, it just starts for 2 seconds and vanishes immediately just showing the lenovo logo. Again n again it just being on and off. When i put this battery in another a6000 plus mobile, the same problem occurs. I mean , i want to know why is this happening ? Is the battery gone !!!
Click to expand...
Click to collapse
On first look, it seems like your phone is in bootloop and you need to flash new ROM after wiping the partitions correctly. But, then you are saying that same thing is happening when you insert this battery in another A6000. I think your battery has gone rogue due to some virus, just throw it away. Jokes apart, if another device is showing same behaviour then its almost 100% sure, that your battery has issues and need to be replaced. And, why don't you actually check switching on your phone by putting the battery from that another A6000 into your A6000.
I have checked with another battery, my phone works fine. But that particular battery is doing only on off continuously. But #important thing is , i don't think the battery has gone. Bcoz during the on off process, if i press volume down key, it shows lenovo logo and gets stock there. If the battery has problem, then how can be it stays on showing the logo ?? Confused ???
Hi, so I've been around here for a while and I've had pretty good success with flashing phones.
However, I have a Lenovo A6000 that is hardbricked with Resurrection Remix ROM:
https://forum.xda-developers.com/lenovo-a6000/development/rom-resurrectionremix-5-8-1-t3555184
Followed the destructions and now it is stuck rebooting. I'll see the neat RR logo start and then it will freeze, and then reboot.....over and over. I didn't wipe the phone and start new...thought I could install TWRP and wipe it, flash the new ROM and be done. Nothing like being confident.
So now, it is hardbricked after trying to flash the stock rom....and I cannot figure out how to fix it. Downloaded QFIL, and the stock ROM, installed the Qualcomm drivers, put the phone into Fastboot with VOLUME DOWN + POWER BUTTON and QFIL see's the phone but gets stuck on fail sahara error. I have done countless searches online and the videos I have found don't resolve the problem. Google search turns up no solution. There is a thread here that basically just dies with no solution.
The phone ready for the trash bin?
Also tried Lenovo Downloader and it also gets stuck on step Sahara.
The little cheap phone belongs to a girlfriend of mine (she's a single mom) who has no money to buy a new one, and everyone here knows how awful the stock ROM. So I'm trying to help her out and flash this bugger. I had an A6000 before I bought my MiMax2 and it wasn't a bad little phone after getting RR on it.
Will anyone be willing to help?
?
So no one is willing to help with this problem huh?
From what I can tell the phone is junk now....even though both QFIL and Lenovo Downloader will see it when I plug it in.
Well...thanks anyway.
So who wants to be paid to help fix this problem? You must have PayPal and must be able to solve the problem.
I guess the problem is that a lower version OS can't be installed via QFIL. For example if the phone got bricked in lollipop you can't install kitkat on it via QFIL. Although the same version OS might work (lollipop to lollipop) and of course higher version OS will work.
I have also had some version of QcomDLoader flash tool work where other flash tools simply failed or even older versions of QcomDLoader didn't work.
This is the one that worked for me https://androiddatahost.com/dt3gh9
move firmware (SW_LENOVO BLABLABLA) to loca disk :C
restart pc > then flash again.