Hello i need flash boot loader and pit file via cwm. It is possible ? I dont have computer and i have the error e:cant mount data ... How to flash the stock ROM with bootloader and pit file without computer thanks a lot. I need this because i cant use Odin . i have any solution avaliable ? Sorry bad english
Related
Hi there guys, i have a problem why my phone, i install a new firmware in my A300FU, and i rooted usind CF-Autoroot,
allways i restart my phone enter in recovery mode and say:
MANUAL-MODE:
CSC
Etc
Any solution for that ?
Thanks
Flash new firmware and try again.Maybe u have used wrong pack?
-CALIBAN666- said:
Flash new firmware and try again.Maybe u have used wrong pack?
Click to expand...
Click to collapse
I use Cf-autoroot for my model, and always i restart in recovery mode and say 'LRX22G.A300FUXXU1BOJ5', because the root file is for BOJ5 model, the new firmware i have install is BPC2. So what i did is extract tar file for firmware and take cache.img.ext4 and recovery.img, and reflash in odin only in tar, because md5 get invalid value error, and i dont get more recovery mode when i restart my phone, i think is solved, thanks for the help mate!
My phone is rooted and i was modifying something in the system file then i accidentally deleted the entire system folder. My phone is stuck on boot screen please help me. I read other people same problem and in the forums and i didin't understand anything. Please help me. My phone's model is SM-G530F Android 5.0.2. Thank you :crying:
just flash the stock firmware again.. and root your device again
odin help you
reinstall your rom stock by Odin ( odindownload.com/Samsung-Odin )
Thanks!
When i flash my stock rom firmware odin says : FAIL! :crying: Did i did something wrong? Please help me :crying:
EmiliuxPlayz said:
When i flash my stock rom firmware odin says : FAIL! :crying: Did i did something wrong? Please help me :crying:
Click to expand...
Click to collapse
This has been solved!
Open the .tar.md5 file using 7zip and extract the System.ext4.img or something like that...
PS I Recommend Method 2 as it is easier
Method 1)
Then download Heimdall and copy the file (system) you extracted to the Heimdall folder and finally issue this command on the command line "heimdall flash --SYSTEM (name of the file you extracted)"
If you get any error with the drivers, make sure you are running as admin and if it still errors out go to the drivers folder, open the exe and install the libusbk drivers. If you need more help PM me.
Method 2)
Repack the system.ext4 or whatever as a .tar file using 7zip and flash it via ODIN.
Good night guys, so there's my problem:
I was on DN 0.6.1 custom ROM, TWRP 3.0.2.0 and rooted. Today, i wanted to go back to stock ROM, so, I downloaded the stock firmware throught sammobile, and tried to install it throught ODIN 3.11, but it's stopped at system.img, and remained stuck in it for a long time. so i decided to restart the phone..
Then it's showed the follow message:
firmware upgrade encountered an issue note 4. Please select recovery mode on kies and try again.
So, i tried to re-flash throught ODIN, but stucked at system.img again, after it, I downloaded KIES and tried restore it, but it's stopped at 2%.
I wasn't abble to go to recovery mode, only download mode, so, i extracted the ROM file, and flashed only the boot.img through ODIN. Now it's boot to recovery...
I wiped data/cache, but the following error showed up:
E: Failed to mount system (invalid argument).
and now i can't find a solution for it.. tried to do amost anything that i could find on the internet, but none solved my problem...
I'm wanting to flash PIT + CSC + PDA file, using the repartition option on ODIN, but i'm afraid that may brick my phone for ever...
I'm following this tutorial by now: http://forum.xda-developers.com/not...te-4-pit-files-repartiton-f-g-c-t-w8-t3282641
And i need this CSC file, because my phone is the C version, could someone give me link to download it ? couldn't find in any place.
ANd there's someone who could help me ? i'm very concerned about it because i don't have money to buy another phone at the moment...
Thanks, and yes, already looked at XDA for a answer but couldn't fine any.
THANK YOU :good:
Anyone ?
i bricked my phone but when i tried flashing its stock rom, odin shows repartition error...
n in download mode, it says; device have loaded pit n invalid pit
Me by you turned system & internal storage to F2FS & that is the problem with Odin.
You must give much more accurate description of what happened, with what rom & what is actually working (recovery, ADB) in order that someone can help you.
Hello everyone,
I have a N9005 that only goes into download mode. It doesn't go into recovery mode. When I try to put it in recovery mode, just vibrates, the screen is black and continues to restart itself, vibrating.
If I try to turn it on normaly, Samsung Galaxy Note 3 N9005 logo comes on, stayes like this for 30, seconds, restarts, vibrates twice and keeps on doing this on and on
If I take it to download mode and try to flash a new rom, Odin tells me that there is no PIT partition. I even added the PIT file, but the same, no luck
When I try to flash a rom, on the download mode screen give me different red messages
UDC START-red color
MMC reading error
I even tryed to do emergency recovery with keys, but no luck as well
Any advice?
Regards!
Install Firmware from Sammobile...
albrecht1977 said:
Install Firmware from Sammobile...
Click to expand...
Click to collapse
I will let you know how it works/if it works
You cannot install roms via download mode .
Only official firmware.
If you have flashed official firmware via Odin then try flashing TWRP recovery via Odin .
Are you flashing the correct firmware as a TAR file ??
MMC reading error is probable damaged Nand .
Posted reported to mods for moving to correct Q&A section .
JJEgan said:
You cannot install roms via download mode .
Only official firmware.
If you have flashed official firmware via Odin then try flashing TWRP recovery via Odin .
Are you flashing the correct firmware as a TAR file ??
MMC reading error is probable damaged Nand .
Posted reported to mods for moving to correct Q&A section .
Click to expand...
Click to collapse
Yes, I am flashing the correct firmware from sammobile.
It is tar.md5
Now the phone shows me ODIN: flash read failure.
What can I do in this situation? If it is as you wrote, damaged Nand?
JJEgan said:
You cannot install roms via download mode .
Only official firmware.
If you have flashed official firmware via Odin then try flashing TWRP recovery via Odin .
Are you flashing the correct firmware as a TAR file ??
MMC reading error is probable damaged Nand .
Posted reported to mods for moving to correct Q&A section .
Click to expand...
Click to collapse
When I try to flaah the TWRP recovery, "there is no PIT partition"
Find 4 part firmware and flash correct PIT file /
Suggest a search on NAND fail / Nand Write fail on XDA .
JJEgan said:
Find 4 part firmware and flash correct PIT file /
Suggest a search on NAND fail / Nand Write fail on XDA .
Click to expand...
Click to collapse
Do you have any ideea where I can find the 4 part firmware?
Thanks
Sammobile /updato/samsung -updates. Alldot comms
Search this forum search google.
Have you tried using different USB cables and USB ports?
Odin will sometimes give the "PIT" error when you don't use an OEM cable.
audit13 said:
Have you tried using different USB cables and USB ports?
Odin will sometimes give the "PIT" error when you don't use an OEM cable.
Click to expand...
Click to collapse
Hey guys. Did anyone ever find the solution for this? I have the exact same problem like as in literally exactly. And I've tried the 4part repair firmware, with the pit, as wel as the combination firmware as well as the stock firmware and even tried cf auto root, boot images, twrp flashes.. Nothing! Just also keeps giving the pit error.
Reads as NAND fail , if you have followed all the advice .