Database Users

[FIX - MOD] Audio Fix For AOSP Based ROMS

As many of you that when you flash an AOSP based rom such as CM11 or PA the audio becomes extremely bad. This is due to the inproper optimizations.
I have mostly resolved this problem by using Viper4Android to get the best optimal audio settings. So far it is working great but there is one thing. It is slightly lower volume but not much that it should be a problem. The reason being is that if I set it up any higher the speaker begins to crackle alot and with the settings I have applied there is no crackling for the most part. You are welcome to edit the setting at the very bottom where it says Master Gate Limiter that will adjust volume levels.
The bass is just as punchy and as rich as the Boomsound setting on sense if not better. As for the clarity it seems to be around that area where boomsound is.
Here is a comparison video that i recorded with the setting on and off. (Remember this was recorded with the M8's Microphone so its not as clear or as loud as it would be with the MOD on.)
To install.
1.) Download and install Viper4Android From HERE.
2.) Open up the app and select Install, Then Super Audio Quality and reboot device.
3.) Open up the app again and select UI Setting Then Expert.
4.) Download THIS file.
5.) Extract the folder called Viper4Android to the root of your internal SD CARD.
5.) Open up Viper4Android app then click Load Effect Profile and select OptimalAOSP.
6.) Your audio should be corrected. Feel free to mess with the settings and share with us the best settings you find.

Following thread.

Gave this a shot. As expected, the bass distortion is still present.
Audio is just plain screwed on this phone with aosp. This sounded great until bass came into play.
Sent from my One M8 using Tapatalk

Audio settings

What settings for audio do you use?
I use this and I wanna know of there are better settings. Share yours
I use DooMKernel v11 and Faux Sound too

Install Viper4Android , the different is day & night

heorung said:
Install Viper4Android , the different is day & night
Click to expand...
Click to collapse
I know it makes a big difference via headphones but does the speaker setting improve the Z2...if so what settings do you recommend. I tried it on the speaker of my Nexus 7 and couldn't hear the difference
Sent from my Xperia Z2

kersey said:
I know it makes a big difference via headphones but does the speaker setting improve the Z2...if so what settings do you recommend. I tried it on the speaker of my Nexus 7 and couldn't hear the difference
Sent from my Xperia Z2
Click to expand...
Click to collapse
I tried viper4android with speaker but unfortunately the sound quality when using Walkman with ClearAudio+ gave better result than Viper4Android.

heorung said:
Install Viper4Android , the different is day & night
Click to expand...
Click to collapse
what configuration do you use, because when i installed it, everything was louder but didn't sound better at all?
Thanks
Michael

MichaelWT said:
what configuration do you use, because when i installed it, everything was louder but didn't sound better at all?
Thanks
Michael
Click to expand...
Click to collapse
Hi Michael ,
- open Viper4Android -> Menu -> UI Settings -> Expert Mode
- In Master Power section , tick Enable
- In Convolver section , tick enable and choose Impulse Response that you like , I use SPL GoldMike Impulse (you have to download IRS file and import it to Viper4Android - to import copy the IRS file to /internal-storage/Viper4Android/kernel folder)
- List of some IRS sample file (free & paid)
+ http://forum.xda-developers.com/showthread.php?t=2216193
+ http://forum.xda-developers.com/showthread.php?t=2442933
- Playback Gain Control section , tick enable , select Moderate Effect Strength , 4x Max Gain
- Fidelity Control Section , enable viper bass , select Natural Bass mode , 40Hz Freq ,6db Bass Boost , enable Viper Clarity , Ozone+ mode , 8db Clarity

I heard Viper4android consumes more battery, but is it a lot or not even noticeable?
Sent from my Xperia Z2

I'm using viper4android just with noice cancelling headset. I'll share my settings if anyone want to try.

I'm using Exiztenz 3.1.5 as my ROM...
My music player is PowerAMP > I set the equalizer to "Rock" > the the bass knob 1 third up and the treble 2 thirds up.
I use Sony stock audio settings > sound effects > equalizer on "Heavy" > headphone settings on Studio > Headphones as STH-30.
Then i use skull candy "smokin buds" as my headset.
Great for my liking, i only listen to EDM and Hip Hop

Does viper4android works on stock rooted .402?

heorung said:
I tried viper4android with speaker but unfortunately the sound quality when using Walkman with ClearAudio+ gave better result than Viper4Android.
Click to expand...
Click to collapse
yeah.. same here.. Viper makes the phone sound louder but, stock config sound just way better and clean.. People often confuse "Good Quality" with "More Volume"

Thanks for yours replies, but what configuration do you use on Sound Effects?

Is there any way to adjust phone speakers' volumes seperately? My top speaker is louder than bottom speaker. And call sound is low.

[Audio Mod] FS LiveBass HiFi [Audio Mod]

Introducing LiveBass HiFi...
Deep punchy bass and crisp highs. Realistic environments. Enhances low quality audio files.
Available in Concert, Studio, and Pro (my signature effect) for phone speakers, earbuds, and headphones.
Tweaks may be necessary for optimal sound for your listening device and audio player.
I created the profiles for the devices listed below, but any rooted device with ViPER Audio can use them.
Concert- Loud with extreme punchy bass and some reverb.
Studio- Sounds like a recording studio, minimal reverb.
Pro- Loud with punchy bass and optimal reverb.
Supported Devices:
Any rooted device with ViPER Audio.
Special Supported Audio Players (The players I used in the creation of FS LiveBass HiFi):
Coolpad Arise 5560S - This is a cheap good stock android phone. It is rootable and has a 1.2GHz Dual Core CPU and 512mb of ram. Costs $20 at your local Kroger, Dillon's, or Gerbe's grocery store.
Samsung Galaxy Centura - This is a common android Straight Talk or Tracfone phone. You can get a refurbished one for around $10. It is also rootable.
Moto E LTE (Surnia)
Special Supported Listening Devices (The listening devices I used in the creation of FS LiveBass HiFi):
JVC Riptidz HAFX8B
Nakamichi 780M
Nakamichi NC40
Koss Plugs
Kinivo BTH240
*A Timex Alarm Clock* (Used for bluetooth speaker, so the sound may not be the best for a normal BT Speaker)
JVC HA-FR202
Prerequisites: Root and ViPER Audio (V4A)
Root ---> Lookup how to root you device on Google as this process can vary.
ViPER Audio Available here ---> http://vipersaudio.com/blog/
FS LiveBass HiFi Downloads (Old Versions Are Available):
V 1.0 https://drive.google.com/file/d/0B2qdigH85Pd-T0ZVQmZPY3lLMTQ/view?usp=sharing
V 2.0 https://drive.google.com/open?id=0B2qdigH85Pd-Zm91VE83NVlUMzA"
V 3.0 https://drive.google.com/file/d/0B2qdigH85Pd-b0gyOEZRYzV5bUk/view?usp=sharing
Directions:
1. Root your device.
2. Install ViPER Audio and drivers. Activate ViPER Audio in your system sound settings.
3. Extract FS LiveBass HiFi. (May have slightly different name for different versions) Copy the profile folder into ViPER4Android on your phone. Copy the DDC and Kernel to the same folder.
4. Open ViPER Audio.
5. Load Effect Profile. Pick the one you want and disable and re-enable the master power.
6. Open a compatible music player. Google Play Music, Vanilla Music, Black player EX, Poweramp and MediaMonkey Pro works for me. Some of these have settings to enable stock audio. If ViPER Audio is installed as a System app, enable stock audio. Enjoy the superior sound!
Coming Soon...
DDC for the above listening devices. Currently have none.
Maybe some IRS files for the convolver.
Changelog:
Version 1.0 - First version made!
Version 2.0 - Sound enhancements, loudness reduction for more normal loudness. New Bluetooth Speaker Profiles.
Version 3.0 - More audio profiles, add support for Moto E and JVC Xtreme Xplosives, more convolvers (not mine), and more!
Request a profile:
If you would like to request profiles for other devices other than the ones above, I could use more devices. Contact me! [email protected] Please use the subject FS LiveBass HiFi, so I can find your email.

Some custom DDC file?
来自我的 SM-G9280 上的 Tapatalk

Trying to blow my phone up ? I used the profile for phone speaker and it is unbearable

metrohackz said:
Trying to blow my phone up ? I used the profile for phone speaker and it is unbearable
Click to expand...
Click to collapse
You can always tweak it brooo...

De_Falt said:
You can always tweak it brooo...
Click to expand...
Click to collapse
I mean I guess but what was even the point of downloading you know ?

metrohackz said:
I mean I guess but what was even the point of downloading you know ?
Click to expand...
Click to collapse
I downloaded it because I want to hear what other people's sound profile sounded like on my V-MODA Headphones.

metrohackz said:
Trying to blow my phone up ? I used the profile for phone speaker and it is unbearable
Click to expand...
Click to collapse
The devices in the list are the ones I have. My profiles may sound different on your devices. If you don't like it, you can change the settings. For you, I would recommend changing to Master Gain (Limiter) output gain to a lower setting, and have playback gain control off along with extra loud off.

yyh991013 said:
Some custom DDC file?
来自我的 SM-G9280 上的 Tapatalk
Click to expand...
Click to collapse
No DDC's yet. Sorry, been kinda busy.

V3 is here! More audio profiles, add support for Moto E and JVC Xtreme Xplosives, more convolvers (not mine), and more!
A reminder to all: any profile can be tweaked. So blowing up your stuff is your fault, not mine. *This is your disclaimer*
No DDCs yet, I'll be leaving for the U.S.A.F. BMT on April 10th. I'll be be getting better equipment as well (likely toward the end of this year or early next year), it's going to be at least $5k.
Also I have a new music streaming service coming... it will be live after I get back from the military and set it up (could be a year as Cyber Transport has 8 months of training). You can try the service until it goes down on April 10th at audify.cf/audify

The title is misleading as all hell considering this isn't an actual mod.

ninjasinabag said:
The title is misleading as all hell considering this isn't an actual mod.
Click to expand...
Click to collapse
This is just a bunch of V4A IRS and Profiles.
So it's not that misleading.
Sent from my Galaxy Grand II using XDA Labs

--> said:
This is just a bunch of V4A IRS and Profiles.
So it's not that misleading.
Sent from my Galaxy Grand II using XDA Labs
Click to expand...
Click to collapse
.-. ummmmm. Okay, if you say so.

Audio Tuner, MaxxAudio

Does anyone know about a MAXXaudio or Audio tuner zip for CM12.1 or CM13?
Currently I am on OxygenOS 2.1.2 and I think the Audio Tuner (or MaxxAudio) is quite good (if you tune it right).
I would love to have that on CM12.1 instead of the current AudioFX (which doesn't support bass boost on speaker).
EDIT: similar thread found: http://forum.xda-developers.com/oneplus-2/help/one-plus-maxx-audio-effects-exodus-rom-t3231418
Thanks

[FEATURE REQUEST] AudioFX like audio eq control app inbuilt

There is no eq apps built in. Since I came from cm and was so addicted to the audiofx on cm, I miss that feature.
It would be nice if PA had such an option. Maybe the DFX audio Enhancer available for Windows like software with high quality eq settings fidelity surround and bass boost. :good: