Database Users

[UPGRADE] Honor 4C B067 and B120 Version to Lollipop(B330) by HassanMirza01

READ FIRST:
This thread is for PAKISTANI Users only as i have tested it on Pakistani Rom B120.
This is all your responsibility.... Dont blame me if you BRICK your Device. I wont be responsible,,,
Description:
Today i found an working UPGRADING Method of Pakistani Huawei Honor 4C
to LOLLIPOP
yes you heard right, Pakistani 4C to Lollipop...
Prerequisites:
First of all, You should Unlock Bootloader, otherwise all this process is impossible. for Unlocking Bootloader, Follow this thread [/COLOR][/B] Honor 4C Root+CWM(KITKAT) Recovery & Bootloader Unlock by @HassanMirza01
Prodedure:
Now when you have unlocked your bootloader, you can go ahead.
You need to Move to another Rom first whose Link is this,
1st ROM, dont Worry if Language different. Just download it
After downloading, Unzip that zip file and you will get a dload named folder inside it.
Make backup of any type that you want.
Now Move dload folder to Root of your SD Card and go to Settings>Updater>Local Update and flash full Package.
After Upgrade, Your recovery gives an error, but Dont worry about it, Just do these things, factory reset it from that screen, then wipe cache partition. and reboot... your good to go now...
After switching on the phone, download the another ROM which is LOLLIPOP ROM and now its compatible for your ROM. Here is Link..
2nd ROM, LOLLIPOP ROM Final and decryption Key is !ldp5f_t_y7JaPIjCRugiYuS3QOHezIWgQoC2RwCCjrc
Do the same again which you did widout any worry... after it, no error in recovery will come but you have to manually factory reset and wipe cache partition of it by switching it off then pressing volume down and power button together sometimes, when recovery came, wipe and factory reset it and REBOOT and BOOM, You got your Lollipop ROM in your Pakistani 4C...
Hit Thanks Button if i Helped you,..... Enjoy and stay Tuned for future Posts... Gud Luckk....
XDA: DevDB Information:
[UPGRADE] Honor 4C B067 and B120 Version to Lollipop(B330) by HassanMirza01
Contributors:
@HassanMirza01
Version Information:
Status: Stable
Stable Release Date: 2015-10-22
Created on: 2015-10-22
Last Updated on: 2016-03-18

reserved

Is it aosp or emui.. thanks

hi bro I tried it ans installed but my concern is that it shows 4G and after foemat data and clearing the cache it showed only 2 icons on main screen i tried to reset it but it failed on 95% help me. now google play store is closing when I open it automatically

Its Emui based stock Lollipop Rom... From huawei... Nd reset it before first boot.... Try flashing it again...

..

does any indian tried this???????????

Hi guys I tried and got success with stock recovery ,but now when I tried to update to lollipop it says Version Check Fail and software install failed, please tell me a solution to update to lollipop my build number CHM-U01 V100R001C636B070
Which first ROM should I download from Spanish website,the link you provided goes as huawei null,is it the g play mini ROM or Chile ROM ,just confused
Sent from my AO5510 using xda premium

Hi ishaal
I tried still it says version and build no not verified ,software upgrade failed ....
It is saying for gplay mini ROM and lollipop rom.
Its not force upgrading.
If any of you guys can give my back up of lollipop ,let's see if I can install back up via twrp/cmw recovery
Sent from my AO5510 using xda premium

First of all, my name is inshaal not ishaal,,,
An indians dont need to flash 1st Rom which is G PLAY MINI's ROM,,, they should flash lollipop Rom directly wid stock Recovery,,,
and @ashripat , Try the Method using C185B120 build,,,, i have done it on this build,,, on B120, flash the g play mini's Rom and then lollipop rom,,,,, also now, pakistani Lollipop Rom is available,,, get that and flash on paki rom,,,

suvam68 said:
does any indian tried this???????????
Click to expand...
Click to collapse
We already have lollipop official update.check on google
Sent from my CHM-U01 using XDA Free mobile app

Thats the same upgrade of indian Rom......

Hello guys,
I finally succeeded to have lollipop rom ,this was possible due to developer Inshaalmirza for his rooting,unlocking and flashing recovery tutorial and finally developer Worstenbrood for huawei update extractor tool and tutorial.
Guys if any of you have problems regarding flashing manually or your system saying check version failed you can do the following steps...(note your phone must be unlocked)
1)Download the stock roms(kitkat or lollipop) extract update.app ,now install the huawei update extractor app and extract the update.app as per tutorial explained by Worsternbrood ,you will have every partition with file names.
2)After extracting you will have 2 recoveries ( file named recovery & recovery2) extract recovery.
3) Create a dload folder in SD card and add the appropriate update.app either lollipop or kitkat whichever you have to flash in it.
4)Now factory reset the phone and flash the extracted recovery as per tutorial explained by Inshaalmirza.
5) Now press the volume up ,down and power key together and viola the update.app gets fashed.(Note for kitkat flash kitkat recovery and for lollipop flash lollipop recovery)
Working and tested for versions C636B070 & C636B160.
Request to developer Inshaalmirza to add or make changes if he wishes in the above tutorial and add in OP.
Thankyou
Sent from my AO5510 using xda premium

Hi bro, Is there way to enable 4g on chm-u01 model?
For example by editing /data/property/persist.radio.lte_enabled
I tried to change this file from flase to true but after reboot it revert back to false

@ashripat in your post,,,, mention that no need to extract stock recovery using update extractor!! Bcoz the stock recoveries for kitkat and lollipop Roms are already present in my other threads of custom recoveries for kk nd L,,,

Is that working on chc-u01 or not ?

@inshaalmirza
Plz help
I got a new honor 4c (Indian) yesterday. Downloaded the official lollipop from honor site and the installation failed ( was on C636B070 version).
I tried again with the middle_update update package and this time it succeeded.
After that I cannot apply any update or even boot into recovery for factory reset.
Please suggest any workaround as I don't want to root and void my warranty
Thanks

Guys I updated my Honor 4C CHC-U01 to Lollipop 5.1.1. If you want to know how I I'll tell you.

This is the newest verson in China.

@hp5942 bro flash the B390 build rom indian, and then flash the vendor file pkg..... Your build id will become real which is installed!!..
@inshaalmirza

EMUI 4.0 Android 6.0.1 KIW-L21 C185 (Middle East Version)

Warning : I am not responsable for any bricked devices, dead sd cards, or other issues, I just wanted to share this, because I know, there are many Honor 5x KIW-L21 C185 users, and this, in my case, worked.
Warning :
***This will turn your device into a single sim phone.***
This WILL CHANGE your CUST version to 432.
Because I couldn't wait anymore for the official MM update from Huawei. I managed to install EMUI 4.0 Android 6.0.1 on my KIW-L21 C185, Middle East Version following this steps here: http://forum.xda-developers.com/showpost.php?p=67851428&postcount=2 .
1. You need to install TWRP, obviously . http://forum.xda-developers.com/devdb/project/dl/?id=19454
2. Download mm-update from here http://forum.xda-developers.com/devdb/project/dl/?id=19446 and extract files, you should be seeing 2 image files : TZ.img and MODEM.img .
3. Download and install Huawei Update Extractor http://forum.xda-developers.com/showthread.php?t=2433454 .
4. In my case, I downloaded this firmware here http://download-c.huawei.com/download/downloadCenter?downloadId=84663&version=327467 .
5. Now, using the Huawei Update Extractor, open the downloaded firmware and extract BOOT.img , CUST.img , SYSTEM.img on your computer.
6. Reboot phone in recovery mode and make a full TWRP backup.
7.Wipe data/factory reset and then wipe system, Data, Cache, Cust, Dalvik/Art Cache.
8. Install, and in the bottom of the screen, choose install image as following:
I. BOOT.img install to Boot.
II. CUST.img install to cust_image.
III. SYSTEM.img install to system_image.
IV. TZ.img install to tz_image.
V. MODEM.img install to modem_image.
9. After installing all of the above files, just reboot and there it is.
Untill now, I haven't found any bugs or issues, except that in the 'About Phone' panel at Model Number it doesn't say anymore KIW-L21 , but says 'MSM8916 for arm64'.

Screenshots

Is it stable and all options working
Sent from my KIW-L21 using Tapatalk

kevoxy said:
Is it stable and all options working
Click to expand...
Click to collapse
So it seems, in my case,everything is working, no FC's , camera working fine in professional mode, extends battery life.
Only thing I didn't try is going back to stock C185 Rom.
Also,didn't try flashing others rom,because I really like how it's working on EMUI 4.0

hi boro Im flash this rom in honor 5x kiw-l21c185b140 everything good just rom one sim card not dual sim???

mammadpsy said:
hi boro Im flash this rom in honor 5x kiw-l21c185b140 everything good just rom one sim card not dual sim???
Click to expand...
Click to collapse
Never tried using dual sim mod,as I only use one sim, that I didn't check.

cosminvr27 said:
Warning : I am not responsable for any bricked devices'.
Click to expand...
Click to collapse
Hi, i flashed cm13 and i wanna do flash for this build because of change tz number to get newer builds of cm.
Is it work on cm 13 or i must have stock rom before doing flash, accidentally i removed my stock rom i think, and twrp backup didn't restored my previous rom.
Pls help. Tnx.
Sent from my KIW-L21 using XDA-Developers mobile app

najafi.ali.68 said:
Hi, i flashed cm13 and i wanna do flash for this build because of change tz number to get newer builds of cm.
Is it work on cm 13 or i must have stock rom before doing flash, accidentally i removed my stock rom i think, and twrp backup didn't restored my previous rom.
Pls help. Tnx.
Click to expand...
Click to collapse
I'm not sure, I would try going back to stock rom first , as I not know how would it affect flashing over CM. Try to revert to stock first , than do update,than flash CM again.

cosminvr27 said:
I'm not sure, I would try going back to stock rom first , as I not know how would it affect flashing over CM. Try to revert to stock first , than do update,than flash CM again.
Click to expand...
Click to collapse
You're right, I'll do that, but i didn't get back tu stock rom in my life, if i wanna do that how? Its like flashing cm? I didn't find KIW-L21 C185 VERSION stock rom for download anywhere, i don't know why.
Thanks again for your help ?
Sent from my KIW-L21 using XDA-Developers mobile app

najafi.ali.68 said:
You're right, I'll do that, but i didn't get back tu stock rom in my life, if i wanna do that how? Its like flashing cm? I didn't find KIW-L21 C185 VERSION stock rom for download anywhere, i don't know why.
Thanks again for your help ?
Click to expand...
Click to collapse
Here it is
http://click.xda-developers.com/api...d 5.1_EMUI 3.1_C185B130_Kuwait_Channel-Others
You have to put it on the sd card in dload folder than hold volume - , volume + and power , and the rest does it by itself..also, after , make sure you update to b140 , as it will ask for it after you configure the phone.

Tried installing twrp but didn't boot
And in twrp 3-0-0 doesn't have option to flash images in cust or tz partitions

cosminvr27 said:
e.
8. Install, and in the bottom of the screen, choose install image as following:
I. BOOT.img install to Boot.
II. CUST.img install to cust_image.
III. SYSTEM.img install to system_image.
IV. TZ.img install to tz_image.
V. MODEM.img install to modem_image.
9. After installing all of the above files, just reboot and there it is.
Untill now, I haven't found any bugs or issues, except that in the 'About Phone' panel at Model Number it doesn't say anymore KIW-L21 , but says 'MSM8916 for arm64'.
Click to expand...
Click to collapse
Hi, when.i wanna flash cust.img its not a cust partition to flash on to it, what is wrong? Is sth with my phone or my twrp version (3.0.2.0)?

najafi.ali.68 said:
Hi, when.i wanna flash cust.img its not a cust partition to flash on to it, what is wrong? Is sth with my phone or my twrp version (3.0.2.0)?
Click to expand...
Click to collapse
What partitions do you see ?

cosminvr27 said:
What partitions do you see ?
Click to expand...
Click to collapse
Boot and recovery, it can be fixed?

najafi.ali.68 said:
Boot and recovery, it can be fixed?
Click to expand...
Click to collapse
But you did revert to stock , right ?

cosminvr27 said:
But you did revert to stock , right ?
Click to expand...
Click to collapse
Yes, i flashed cm build of 18july @crpalmer, for newer builds and FP i need mm base because of tz number, i revovered my twrp.backup to stock and when i want to do your steps i see this problem.
It could be because of version of twrp? I donno how to change twrp.
Thanks for your help.

najafi.ali.68 said:
Yes, i flashed cm build of 18july @crpalmer, for newer builds and FP i need mm base because of tz number, i revovered my twrp.backup to stock and when i want to do your steps i see this problem.
Thanks for your help.
Click to expand...
Click to collapse
Yes,but you got back to stock using the update.app or your recovery ? If You did recovery try force updating stock using the dload folder and the update.app.

cosminvr27 said:
Yes,but you got back to stock using the update.app or your recovery ? If You did recovery try force updating stock using the dload folder and the update.app.
Click to expand...
Click to collapse
I said that i got back to stock with twrp restore,that i think it means recovery you said and now
im on kiw-l21 c185.
I dont get that, you mean that i put stock rom in dload forder then what? Use local update in updater? It will work?
d

najafi.ali.68 said:
I said that i got back to stock to stock with twrp restore,that ithink.it means
recovery you said and now im on kiw-l21 c185
I dont get that, you mean that i put stock rom in dload forder then what? Use local update in updater? It will work?
d
Click to expand...
Click to collapse
Yes.
Download this https://mega.nz/#!Q0YQmIQD!KSwQvGymMUf-YA4A5oDFBvg12UwQlPDm5dIOdTDsEjc
You should be seeing either an archive either the update.app file, wich is the stock b130 rom.
Now, copy the update.app on the sd card into a folder called dload ( If you don't see it, just create it ).
Power off the phone, then press at the same time volume +, volume - and power and it should install the stock b130 rom. Next just do the update to b140 through the updater and reinstall twrp and try again .
If while updating you encounter any errors , try reinstalling stock recovery first.

cosminvr27 said:
Yes.
Download this https://mega.nz/#!Q0YQmIQD!KSwQvGymMUf-YA4A5oDFBvg12UwQlPDm5dIOdTDsEjc
You should be seeing either an archive either the update.app file, wich is the stock b130 rom.
Now, copy the update.app on the sd card into a folder called dload ( If you don't see it, just create it ).
Power off the phone, then press at the same time volume +, volume - and power and it should install the stock b130 rom. Next just do the update to b140 through the updater and reinstall twrp and try again .
If while updating you encounter any errors , try reinstalling stock recovery first.
Click to expand...
Click to collapse
Ok when i got home i'll do.that and tell what happened.
Thank you so much

[Guide] Safely unlock bootloader on official MM

UPDATE: This is now unneeded because threr is a faster way ro unlock bootloader on official MM here, he updated for official MM
Hi, I discovered an unlock method for official MM!! This maybe long but's it totally safe
You need:
Adb and fastboot environment ready PC
LP RAW File
Android 6.0 Beta Unlock tool
Android 5.0 One-Click Unlock tool
First version of beta MM (Z00A) (Z008)
Official MM zip (find it on Asus site)
Thanks to all people upload these links
Just do the following:
Flash the lastest LP via AFT (using raw file given above), wipe all data. If you already on MM, you have to downgrade
Unlock your bootloader using 1 click tool given above
Boot to stock recovery and sideload the first version of beta MM
Unlock the bootloader using MM beta unlock tool above
Boot to stock recovery
Two case here:
Case 1: You can't boot stock recovery
Normally boot your phone (to Android)
Setup it as a new phone
If it shows there is a new firmware, don't update!!!
Enable Developer options, then enable usb debugging
Copy the official MM zip to external sd card
Open command prompt, run adb reboot recovery, accept the adb permission if prompted
After it boots to recovery, select Apply update from SD, then choose the zip file you've copied before
Wait for it to update, it may stuck at flashing splashcreen, don't worry, it's trolling you, may be Asus forgot to update the script
Goto step 7
Case 2: You can boot stock recovery
Sideload the official MM zip (adb sideload <filename>.zip)
Goto step 7
7. Flash this TWRP (fastboot flash recovery <twrp>.img)
8. Root your phone using this method
9. Reboot, if it shows "Your phone has failed verification bla bla..", then you've success. It may reset loop like note 7 in the first time start, don't worry.
9. Enjoy :highfive:
Note: If you're facing with battery problems on MM, factory reset it in Settings > Backup and Reset > Factory Reset > Erase everything
Successfully on my ZE550ML
The warning screen is normal so don't worry and there is no way to fix it for now

Reverse

Reverse #2

Please answer this I have a unlocked Bootloader + twrp Intalled + root, now I am really confused that after upgrading to MM will my Bootloader get automatically lock or what
Sent from my ASUS_Z00A using XDA-Developers mobile app

NiTesh said:
Please answer this I have a unlocked Bootloader + twrp Intalled + root, now I am really confused that after upgrading to MM will my Bootloader get automatically lock or what
Sent from my ASUS_Z00A using XDA-Developers mobile app
Click to expand...
Click to collapse
Yes, BL will be relocked once you upgrade to MM.
If you want to unlock MM BL(6.0), refer to this thread.
Or you can downgrade to Lollipop referring to this thread. Then your BL(5.0) is unlocked.

Upgrade to MM
Hello folks!
2 week before MM was released i'ved opted to unlock my ZE551ML BL and therefore install twrp and a MM custom ROM..
so here´s the thing i stayed with the ROM for about 3 weeks and honestly..it works very well..but when i knew that 6.0 official was coming out i decided to go back to stock..i did it following manny tuturials avaliable for me to get my BL Re-Locked..but unsuccessfully..so i followed mr_gourav2000 tuturial (http://forum.xda-developers.com/zenfone2/development/stock-rom-ul-z00a-ww-2-20-40-168-t3354526) and reverted to the WW_Z00A-2.20.40.183-to-2.20.40.184 (hopefully i can get the sshot in this post) version...since my BL is unlocked i can´t get no updates..my question is:
Is there anyway to go to MM 6.0 by ASUS with the current status of my phone?
is there anything i can do to revert this??
Cheers to everyone
https://www.dropbox.com/sc/xue7iuqfyvgdvo3/AAATR4mYtcHzM1IhfKbx2a1oa

R3D SoX F4N said:
Hello folks!
2 week before MM was released i'ved opted to unlock my ZE551ML BL and therefore install twrp and a MM custom ROM..
so here´s the thing i stayed with the ROM for about 3 weeks and honestly..it works very well..but when i knew that 6.0 official was coming out i decided to go back to stock..i did it following manny tuturials avaliable for me to get my BL Re-Locked..but unsuccessfully..so i followed mr_gourav2000 tuturial (http://forum.xda-developers.com/zenfone2/development/stock-rom-ul-z00a-ww-2-20-40-168-t3354526) and reverted to the WW_Z00A-2.20.40.183-to-2.20.40.184 (hopefully i can get the sshot in this post) version...since my BL is unlocked i can´t get no updates..my question is:
Is there anyway to go to MM 6.0 by ASUS with the current status of my phone?
is there anything i can do to revert this??
Cheers to everyone
https://www.dropbox.com/sc/xue7iuqfyvgdvo3/AAATR4mYtcHzM1IhfKbx2a1oa
Click to expand...
Click to collapse
Just download the update package and rename it to mofd_sdupdate.zip, copy it to internal storage. Then reboot to stock recovery, the update will automatically start. This should work if you have lastest stock recovery

can anyone please upload official recovery for Zenfone 2 ZE551ML, currenty i have twrp installed on Android version 5.0 LP Stock

HungNgocPhat said:
Just download the update package and rename it to mofd_sdupdate.zip, copy it to internal storage. Then reboot to stock recovery, the update will automatically start. This should work if you have lastest stock recovery
Click to expand...
Click to collapse
i have twrp recovery at the moment cause i followed mr_gouvad2000 tuturial..
what do you sugest?
flash WW_ZE551ML_2.20.40.196_20160815.raw?
WW_ZE551ML_2.20.40.194_20160713.raw?
and then go and do what you told?
cheers

hello, i cant find first mm beta for ml551...can you help me? thank you and sorry for my english

tridet18 said:
hello, i cant find first mm beta for ml551...can you help me? thank you and sorry for my english
Click to expand...
Click to collapse
someone correct me if i am worng but....
https://www.asus.com/Phone/ZenFone_2_ZE551ML/HelpDesk_Download/
Look for this version WW-4.21.40.134

Hello, thank you but this version is official, i need de first beta 6.0
R3D SoX F4N said:
someone correct me if i am worng but....
Look for this version WW-4.21.40.134
Click to expand...
Click to collapse

that version...i can´t find it anywere..maybe someone here knows were to find it?

Updated the first MM beta link in OP

hello , thanks to your tutorial I managed to unlock the bootloader , I have TWRP version 3.0.0.2 with stock installed but when I wanted to install CM13 and gapps I restarted the phone and automatically returns to recovery again. some help?

tridet18 said:
hello , thanks to your tutorial I managed to unlock the bootloader , I have TWRP version 3.0.0.2 with stock installed but when I wanted to install CM13 and gapps I restarted the phone and automatically returns to recovery again. some help?
Click to expand...
Click to collapse
Have you downloaded the correct build? There are build for MM bootloader, if you flash the normal builds, it will fail and reboot to recovery again. Gapps is the same for all builds
After you install that special build, do not update to newer nightlies, it will fail. For updates, check the link i give you and see if there is a new MMBL build.
About that, here is the post: http://forum.xda-developers.com/showpost.php?p=68542370&postcount=8551

hello friend, I tried to install the CM13 ROM that indicated me and I get Error 7 in TWRP 3.0.2.0, I have Android 6.0 (.134) official and if I can change kernel and flash rom SuperSU but change with a new MM Blows I can not (CM13, AICP, beanstalk ....) thanks for your help!

tridet18 said:
hello friend, I tried to install the CM13 ROM that indicated me and I get Error 7 in TWRP 3.0.2.0, I have Android 6.0 (.134) official and if I can change kernel and flash rom SuperSU but change with a new MM Blows I can not (CM13, AICP, beanstalk ....) thanks for your help!
Click to expand...
Click to collapse
Run the script again (i gave you in above post). Download the CM13 in that link, not in the OP of CM13 thread. Flash that CM13 and Gapps (Gapps is universal for MMBL and LPBL).
May be you have corrupt download, I'm currently running CM13 on MMBL

Hello, I have finally found the solution, the problem is the recovery, the TWRP 3.0.0.2 da failure with new builds, I Flashed next on the link you put me through adb and now it works, thank you very much for everything .

hlp
tridet18 said:
Hello, I have finally found the solution, the problem is the recovery, the TWRP 3.0.0.2 da failure with new builds, I Flashed next on the link you put me through adb and now it works, thank you very much for everything .
Click to expand...
Click to collapse
how u unlocked bootloader

Im on C66 how to update on newer firmware version?

So,
My phone is vns-l21c66b131 and is there any way to update to newer versions without rooting and if possible can someone write steps on how to do it?

If you use <SEARCH> you find followings:
<After a few day of reading users personal experiences regarding upgrade to Android 7 Nougat i make the big step myself...
My device is VNS-L21 model and entire process goes flawless...
Device state was stock MM VNS-L21C432B150, bootloader lock, dualsim enabled.
1. Unlock bootloader folowing by Automatic Factory Reset.
2. Flash TWRP
3. From TWRP i flash Meticulus TWRP
4. Reboot to TWRP and flash update.zip and update_data_full_VNS-L31_hw_eu.zip, both flash ends with errors, without reboot between flashes.
5. After that, i reboot device and boot in system ok, start configuration, etc.
6. I reboot to fastboot and flash Nougat Recovery reworked by @BadWolfYe
I am not experienced camera bug, all works fine and i have now a fully functional phone.
BTW, dualsim remain enabled and works both sims.
Thanks to all contributors for these pieces of firmware, first of all to @BadWolfYe!>
For that's is <SEARCH>, not to open another topic for same problem...

Thanks for the reply, but I'm not talking about Nougat, I talk about MM b161 update. How to do it if my carrier is c66 and the newest update there is b131

Coolyou said:
Thanks for the reply, but I'm not talking about Nougat, I talk about MM b161 update. How to do it if my carrier is c66 and the newest update there is b131
Click to expand...
Click to collapse
If you want to stay on C66 you have to wait to OTA updates...
If you make any upgrade via dload folder on sdcard your phone will go from C66 to C900 (global)
Another alternative is to debrand your phone to C432 (hw eu)
For any of this is treated here in some topics...

So I just need to create dload folder and put the zip there?

Coolyou said:
So I just need to create dload folder and put the zip there?
Click to expand...
Click to collapse
Not the zip! Put the update.app wich is in the zip, for this method.
The zip is ok for update from TWRP.

gtdaniel said:
Not the zip! Put the update.app wich is in the zip, for this method.
The zip is ok for update from TWRP.
Click to expand...
Click to collapse
Do i lose warranty if i change to global ?

relock bootloader+rom stock+encryption unsuccessfull !!

Hello, I have a 2016 p9 lite. I would like to sell it. So I would like to re-lock the bootloader and re-install the original rom.
build number: VNS-L31C432B412
version of EMUI: 5.0.1
Android 7.0 version
How should I do it ? Where can I get the original rom?
Currently I have twrp elite 3.1.1.1 installed and it refuses to boot on the system because: "encryption unsuccessfull: encryption was interrupted and can't complete. As a result, the data on your phone is no longer accessible.
Please help

toto6976 said:
Hello, I have a 2016 p9 lite. I would like to sell it. So I would like to re-lock the bootloader and re-install the original rom.
build number: VNS-L31C432B412
version of EMUI: 5.0.1
Android 7.0 version
How should I do it ? Where can I get the original rom?
Currently I have twrp elite 3.1.1.1 installed and it refuses to boot on the system because: "encryption unsuccessfull: encryption was interrupted and can't complete. As a result, the data on your phone is no longer accessible.
Please help
Click to expand...
Click to collapse
Try to install Service ROM from SD card using dload method.
Link:
https://androidhost.ru/41d
Follow instructions in file "ReleaseDoc". (Read everything carefully before doing anything).
Through this process, your data will be deleted and bootloader will be locked again.
Dload method works with Stock Recovery only, you have to install Stock Recovery first.

toto6976 said:
Hello, I have a 2016 p9 lite. I would like to sell it. So I would like to re-lock the bootloader and re-install the original rom.
build number: VNS-L31C432B412
version of EMUI: 5.0.1
Android 7.0 version
How should I do it ? Where can I get the original rom?
Currently I have twrp elite 3.1.1.1 installed and it refuses to boot on the system because: "encryption unsuccessfull: encryption was interrupted and can't complete. As a result, the data on your phone is no longer accessible.
Please help
Click to expand...
Click to collapse
Hey dude !!
So you bricked the device ....
I don't know why but if you want B412 firmware
you can use @-Alf- guide and re-upgrade via Firmware Finder
to B370 fullota-mf-pv first, then to B412 fullota-mf...
Or download a previous from B412 firmware (ex: VNS-L31C432B410 fullota-mf)
and use HuRupdater method to flash the firmware.
Extract then stock recovery from B410 via Huawei Extractor and flash it via TWRP.
Re-update finally to B412 using Firmware Finder.
I can help you doing this, worked on my ex device but i can't guarantee 100%.
Cheers

Dadditz said:
Hey dude !!
So you bricked the device ....
I don't know why but if you want B412 firmware
you can use @-Alf- guide and re-upgrade via Firmware Finder
to B370 fullota-mf-pv first, then to B412 fullota-mf...
Or download a previous from B412 firmware (ex: VNS-L31C432B410 fullota-mf)
and use HuRupdater method to flash the firmware.
Extract then stock recovery from B410 via Huawei Extractor and flash it via TWRP.
Re-update finally to B412 using Firmware Finder.
I can help you doing this, worked on my ex device but i can't guarantee 100%.
Cheers
Click to expand...
Click to collapse
Please read carefully, Maestro :
"I would like to sell it. So I would like to re-lock the bootloader and re-install the original rom."
Piece.

Hello,
I reinstalled the custom rom that I found on the net: C432B414 with Hurupdater.
It works.
However, the bootloader is still unlocked ... however, I would like to return to the factory configuration with the bootloader locked.
https://www.cjoint.com/c/JItgZO6GuGB
I have the stock recovery install :
https://www.cjoint.com/c/JItg7SqQmdB
I am currently downloading the file indicated by this link : https://androidhost.ru/41d
In the file provided by Alf, there are two files:
'HUAWEI P9 Lite Android7.0 rollback to Android6.0 operation instruction'
'HUAWEI VNS-L31C432B416 Software Upgrade Guideline'
which one do I choose

toto6976 said:
I am currently downloading the file indicated by this link : https://androidhost.ru/41d
In the file provided by Alf, there are two files:
'HUAWEI P9 Lite Android7.0 rollback to Android6.0 operation instruction'
'HUAWEI VNS-L31C432B416 Software Upgrade Guideline'
which one do I choose
Click to expand...
Click to collapse
Unpack downloaded .zip package, you will see two files - ReleaseDoc and Software. Open "Software" and unpack SDUpdate_Package.tar.gaz. Transfer file dload to SD card and follow instructions - there is 'Software upgrade guidline' in file ReleaseDoc.
Edit.:
You can also safely lock BL with OEMINFO flashing and rollback to A6:
-Download OEMINFO:
https://mega.nz/#!xhEwFYLZ!Sv2nB5GERB_js76sAUWxj8hQgsjnf_YPobVbtrxpCew
Transfer it to the SD Card.
Download VNS-L31C432B160 fullupdate.zip:
http://update.hicloud.com:8180/TDS/data/files/p3/s15/G1164/g104/v66015/f1/full/update.zip
Create a folder dload on your SD , unpack downloaded .zip file and copy it to the dload folder.
Install TWRP 3.1.0-2:
https://mega.nz/#!EsESQQhK!uc_lfXEfDW6U7Lq2VeNOYq5OWUID0G-YyhK-oUL4deU
using command
fastboot flash recovery2 twrp.img (OVER eRECOVERY!) , boot in TWRP, fĺash oeminfo.zip , go back to TWRP's main menu, select Reboot and Power Off. Then use three button combo and flash firmware from dload. Your phone will running A6 with locked bontloader. If you want, you can upgrade back to A7 via OTA update or using Fipmware finder.