Unable to update phone - Zuk Z1 Q&A, Help & Troubleshooting

I recently purchased the Zuk Z1 from Amazon. After I started the device there was a message that I could update my phone. After I clicked it, it said 'Update is installing' but after a short time the device turned itself off and started again in Recovery-Mode. There it said something in Chinese which I can only confirm. After that I can choose a language and then there are 4 Options:
Reboot
Install update package
Swipe data
Shut down
If I choose Install update package there is clue and if I confirm it, it says 'Install failure'
After a restart there is still that update available but if I do it again, nothing changes.
Does anyone have the same problem and could help me?
Note: My phone is not encrypted and Hard-Reset doesn't work either.

Hello, I had bought from Amazon and had the same problems with the updates. have found preinstalled supersu and then installed with flashify TWRP. then simply flashed a other rom

Your rom is ZUI ?

My rom is cyanogenOS and I have exactly the same problem. I bought my zuk z1 via Linio and i suspect that I have the chinese version with cyanogenOS installed afterwards, but I don't know because I received the update.
I hope someone has the solution for this trouble.

gmurop said:
My rom is cyanogenOS and I have exactly the same problem. I bought my zuk z1 via Linio and i suspect that I have the chinese version with cyanogenOS installed afterwards, but I don't know because I received the update.
I hope someone has the solution for this trouble.
Click to expand...
Click to collapse
If the phone has been rooted via an app like KingRoot, or has had SuperSU installed on it, then the partitions are changed. It's possible that your vendor may have messed with your phone before you purchased it. When this happens, COS recovery won't be able to install new updates.
As far as I know, the only solution is a clean flash of COS. Search for PaulOBrien's "Convert Z1 from ZukUI to Cyanogen OS" forum post on MoDaCo, download the COS zip file, and flash that in recovery (you'll lose all your data, be warned. Also, if you are using a custom recovery, you'll need to revert back to the COS recovery .img in that post before flashing the COS zip).
You should be able to install COS updates after doing so. Keep in mind you'll need to install about 8-10 of them after the initial flash to get up the most recent version of Z1 COS.
Good luck!

Frogger4600 said:
If the phone has been rooted via an app like KingRoot, or has had SuperSU installed on it, then the partitions are changed. It's possible that your vendor may have messed with your phone before you purchased it. When this happens, COS recovery won't be able to install new updates.
As far as I know, the only solution is a clean flash of COS. Search for PaulOBrien's "Convert Z1 from ZukUI to Cyanogen OS" forum post on MoDaCo, download the COS zip file, and flash that in recovery (you'll lose all your data, be warned. Also, if you are using a custom recovery, you'll need to revert back to the COS recovery .img in that post before flashing the COS zip).
You should be able to install COS updates after doing so. Keep in mind you'll need to install about 8-10 of them after the initial flash to get up the most recent version of Z1 COS.
Good luck!
Click to expand...
Click to collapse
Oh man thank you very much, but does that mean that I won't be root anymore? In that case I don't know if staying with the current version or upgrade and loss my root privilegies. What do you think?

I have info tha new apdate is ready to install. I press install and phone restarts and come back to noal system. Didnt install the update. Can anybody help?
Wysłane z mojego Z1 przy użyciu Tapatalka

Related

Cant open play store or connect to any google account

After installing MedroM I got this problem and couldn't connect to google account and every google app would crash if I tried to log in, so I flashed b161 and I still have this problem, even after numerous factory resets, has this ever happened to anyone ?
Yes, it is happening to other guys around here...
In fact is happening to all who flash B160/B161 firmware...
Is not possible to flash any firmware previously to B160/B161.
Workaround is to unlock bootloader, flash twrp, root it, reflash oeminfo for your device,
and after that you can flash another firmware again.
gtdaniel said:
Yes, it is happening to other guys around here...
In fact is happening to all who flash B160/B161 firmware...
Is not possible to flash any firmware previously to B160/B161.
Workaround is to unlock bootloader, flash twrp, root it, reflash oeminfo for your device,
and after that you can flash another firmware again.
Click to expand...
Click to collapse
i'm in the same situation, i tried to do what you've said, but twrp says that the installation failed. how can I have play store working again? please help, this situation is driving me crazy!
i'm on c900 b161.
I had the same issue. I did a clean flash of the new 161 update and that made my device a C900. I have a Eurpoean model (T-Mobile Germany).
After 2 days of trying different stuff, here's what gave me a functional device with TWRP and Root back:
-Back up any data you want to keep, obviously.
-Reflash stock ROM (put UPDATE.APP on your dload/ folder on the separate SD card, then boot into the update function by turning the phone off and then holding Vol+, Vol-, Power. Just wait until it's finished.
-Unlock Bootloader again
-Download the Toolkit: http://forum.xda-developers.com/huawei-p9lite/development/europe-vns-l31-toolkit-bootloader-t3432873
-Flash TWRP through the toolkit
-Boot TWRP and root
-In Android, enable ADB
-In the Toolkit, go to Dual Sim>Individual and select the appropriate custom.bin and oeminfo.img from the thread of the toolkit. For my European one it was L31 SS C432. Press flash and grant Root permissions on your phone.
-Turn off your phone and flash the stock ROM again like in step 1.
-If you want root, you need to unlock the Bootloader again, flash TWRP and then root it from there.
DON'T WIPE ANYTHING IN TWRP OR YOU WILL HAVE TO START ALL OVER AGAIN!
Don't ask me how I know.
Hope this saves someone from wasting their time with this nonsense like I have.
No need to touch the oem stuff, just extract the boot.img and system.img and flash through adb, for dat you need bootloader unlocked and fastboot drivers then you can downgrade firmware and fix your sign problem or just wait for a new firmware
raffabraz said:
No need to touch the oem stuff, just extract the boot.img and system.img and flash through adb, for dat you need bootloader unlocked and fastboot drivers then you can downgrade firmware and fix your sign problem or just wait for a new firmware
Click to expand...
Click to collapse
That would be much simpler, I didn't consider that. Would you mind writing up a guide?
I've had the same issue and have resolved it pretty easily,
i did the following steps ;
- download both medrom versions
- do full factory reset
- install medrom v1
- do all settings of google etc
- reboot recovery and install v2
- wipe dalvik and reboot
-- all works now except for the forceclose on facebook
ps : this answer is also in the thread ( not as extended as this but it's there )
Edit : some other apps are Force closing to, my guess is that there's a shared resource of some kind that's corrupted or something..
sirlex said:
I've had the same issue and have resolved it pretty easily,
i did the following steps ;
- download both medrom versions
- do full factory reset
- install medrom v1
- do all settings of google etc
- reboot recovery and install v2
- wipe dalvik and reboot
-- all works now except for the forceclose on facebook
ps : this answer is also in the thread ( not as extended as this but it's there )
Edit : some other apps are Force closing to, my guess is that there's a shared resource of some kind that's corrupted or something..
Click to expand...
Click to collapse
Force closing is caused by the oeminfo in my experience. Can you check in the "About Phone" section which build number your phone currently has? Should be something along the lines of "VNS-L31C432B161" where C432 indicates the region code.
since I am Running MEDROM v2 it shows just that. However , I do know it is based on b161
HeavyHDx said:
I had the same issue. I did a clean flash of the new 161 update and that made my device a C900. I have a Eurpoean model (T-Mobile Germany).
After 2 days of trying different stuff, here's what gave me a functional device with TWRP and Root back:
-Back up any data you want to keep, obviously.
-Reflash stock ROM (put UPDATE.APP on your dload/ folder on the separate SD card, then boot into the update function by turning the phone off and then holding Vol+, Vol-, Power. Just wait until it's finished.
-Unlock Bootloader again
-Download the Toolkit: http://forum.xda-developers.com/huawei-p9lite/development/europe-vns-l31-toolkit-bootloader-t3432873
-Flash TWRP through the toolkit
-Boot TWRP and root
-In Android, enable ADB
-In the Toolkit, go to Dual Sim>Individual and select the appropriate custom.bin and oeminfo.img from the thread of the toolkit. For my European one it was L31 SS C432. Press flash and grant Root permissions on your phone.
-Turn off your phone and flash the stock ROM again like in step 1.
-If you want root, you need to unlock the Bootloader again, flash TWRP and then root it from there.
DON'T WIPE ANYTHING IN TWRP OR YOU WILL HAVE TO START ALL OVER AGAIN!
Don't ask me how I know.
Hope this saves someone from wasting their time with this nonsense like I have.
Click to expand...
Click to collapse
Thank you so much , you saved my phone !!
Fllashing stock rom again isnt necessary , just flash the oeminfo, reboot, they will tell you an encryption password, so you have to do a factory reset AND DONE !
simo255 said:
Thank you so much , you saved my phone !!
it doesn't need to reflash stock rom again, just flash the oeminfo, reboot, they will tell you an encryption password, so you have to do a factory reset AND DONE !
Click to expand...
Click to collapse
Interesting, when I tried to do a factory reset after that screen, it always failed.
HeavyHDx said:
Interesting, when I tried to do a factory reset after that screen, it always failed.
Click to expand...
Click to collapse
You have to flash the stock recovery to do a Factory reset
medRom v2 fix
Hi all.
I think i found solution for Google login issue.
I use European VNS-L21-C432B161 dual sim phone with lattest rom.
I flashed medRom v2 with full wipes.
Ofcourse i Can not log in Google Services.
Today i download 3 Google apk files. Installed and it works.
Sorry. I cant post ling on XDA now.im newbie
Link in My profils.
There is instruction how i do:
1. Installed Gmail apk and login.
2. Installed Android System Web Wiev apk.
3. Installed Google Play Service apk
Proof: in My profils description in Youtube
Download Files: watch in YOUTUBE description.
Hope helps for someone.
Could someone provide me the correct oeminfo and custom.bin for a European/German model? C432? The images inlcuded in the toolkit don't work for me, it still crashes or can't communicate with the google server
Deddline said:
Hi all.
I think i found solution for Google login issue.
I use European VNS-L21-C432B161 dual sim phone with lattest rom.
I flashed medRom v2 with full wipes.
Ofcourse i Can not log in Google Services.
Today i download 3 Google apk files. Installed and it works.
Sorry. I cant post ling on XDA now.im newbie
Link in My profils.
There is instruction how i do:
1. Installed Gmail apk and login.
2. Installed Android System Web Wiev apk.
3. Installed Google Play Service apk
Proof: in My profils description in Youtube
Download Files: watch in YOUTUBE description.
Hope helps for someone.
Click to expand...
Click to collapse
Installing Android System Web View apk from apkmirror solved the problem for me (arm + x86 package). Thank you
HeavyHDx said:
I had the same issue. I did a clean flash of the new 161 update and that made my device a C900. I have a Eurpoean model (T-Mobile Germany).
Click to expand...
Click to collapse
I got my P9 Lite from Congstar in Germany. I didn't knew, that the device would be branded by Telekom. I flashed the B161 and couldn't connect to any google account. Thankfully updating the webview apk via apk mirror solved this problem. But this leaves me with 2 questions and maybe you could answer these...?
1) Do you know which stock rom would work the best with my device (VNS-L31 without the possibility to use two sim cards ) and where I could download this stock rom.
2) Is the B161 supposed to work fine after solving this issue or are there other problems with it?
I would be really happy if someone of you could help me. :good:
MartinMo said:
1) Do you know which stock rom would work the best with my device (VNS-L31 without the possibility to use two sim cards ) and where I could download this stock rom.
2) Is the B161 supposed to work fine after solving this issue or are there other problems with it?
Click to expand...
Click to collapse
1) The best stock ROM would either be, well, the stock ROM, or the Revolution ROM.
2) I've had some strange behavior with Relay for Reddit and frequent crashes of WhatsApp when sending messages. Right now I'm on Lineage OS 14.1 and it's really great. Camera's a bit slow, but otherwise I love it. I missed stock Android.
HeavyHDx said:
1) The best stock ROM would either be, well, the stock ROM, or the Revolution ROM.
Click to expand...
Click to collapse
Isn't Nougat still a beta...? I'm looking for a stable stock version of EMUI...
HeavyHDx said:
2) I've had some strange behavior with Relay for Reddit and frequent crashes of WhatsApp when sending messages. Right now I'm on Lineage OS 14.1 and it's really great. Camera's a bit slow, but otherwise I love it. I missed stock Android.
Click to expand...
Click to collapse
Thank you, tomorrow I'll test if Whatsapp working fine or not, that's important for me. Is Lineage 14.1 the most stable Lineage version?
Nougat is still in beta, yes. The full version is expected to come out within the next few weeks.
14.1 refers to the Android version which is 7.1.1. They adopted CyanogenMod's naming scheme. You'll still need to update LineageOS to get bugfixes and such. The dev releases a new update every 2 or 3 days, just check their website periodically.
Deddline said:
Hi all.
I think i found solution for Google login issue.
I use European VNS-L21-C432B161 dual sim phone with lattest rom.
I flashed medRom v2 with full wipes.
Ofcourse i Can not log in Google Services.
Today i download 3 Google apk files. Installed and it works.
Sorry. I cant post ling on XDA now.im newbie
Link in My profils.
There is instruction how i do:
1. Installed Gmail apk and login.
2. Installed Android System Web Wiev apk.
3. Installed Google Play Service apk
Proof: in My profils description in Youtube
Download Files: watch in YOUTUBE description.
Hope helps for someone.
Click to expand...
Click to collapse
Installed Android System Web Viev .apk did the trick for me, too. muchos gracias.

Flyme 6 for Meizu MX4 (6.1.0.1A_twrp+6.2.0.0G_twrp stable versions)

Thanks to "OkCug32" from "4pda.ru" for this custom recovery Rom!
Flash only with twrp recovery.
-For having Google play services download from meizu app store "GMS Installer" (search "google" is the icon that has a "g" with a yellow,red,blue,green background)
Download:
6.1.0.1A_twrp
https://mega.nz/#!W4lCgQhL!dBHuh3wYwSLuAi1Ott5I3D_K1uuO7HF9DiF_A2AOzlM
6.2.0.0G_twrp
https://yadi.sk/d/WgwPncfG3REuGP
Download
6.1.0.0G_twrp
https://mega.nz/#!O08ymDKI!HAqC2oEQJLokruB9DHTI_L9f0VhfjeqZv-8tu2CCD3U
Well done. Everything works great. Thank you very much @disnomia
Wysłane z mojego MX4 przy użyciu Tapatalka
@disnomia Can you tell me, how to prepare stock Flyme to flashing in TWRP? Is it very dificult?
Wysłane z mojego MX4 przy użyciu Tapatalka
wojted said:
@disnomia Can you tell me, how to prepare stock Flyme to flashing in TWRP? Is it very dificult?
Wysłane z mojego MX4 przy użyciu Tapatalka
Click to expand...
Click to collapse
I use the tutorial from "nikk3d"
http://4pda.ru/forum/index.php?showtopic=689760&st=580#entry43526907
Open the update.zip and from the root of the archive delete:
-logo.img
-uboot.img
Now From "Meta-inf" folder delete:
-imei.dat
-machine_match
and finally from "Meta_inf" ->com->google->android->updater-script delete the lines from the first attachment and save it.
The updater-script must look like the second attachment.
Hello, can I flash the 6G version on my 5A MX4 ?
EDIT
I tried to flash both the G and the A versions with TWRP 2.8.6.0, flashing was successful but i was stuck in a bootloop, even after a factory reset... What should I do to avoid this ?
Thanks in advance
Falnhir said:
Hello, can I flash the 6G version on my 5A MX4 ?
EDIT
I tried to flash both the G and the A versions with TWRP 2.8.6.0, flashing was successful but i was stuck in a bootloop, even after a factory reset... What should I do to avoid this ?
Thanks in advance
Click to expand...
Click to collapse
Try twrp 3.0.2.0 maybe is one possible cause of bootloop
flash the new recovery img and try again
https://mega.nz/#!i0MWFJbQ!3NhLrhyLhUhnPwwDlkJzgcvBrnTNNkab30xJb4F-I2M
disnomia said:
Try twrp 3.0.2.0 maybe is one possible cause of bootloop
flash the new recovery img and try again
Click to expand...
Click to collapse
Will my TWRP 2.8.6.0 backup be valid or should I make a new one?
Falnhir said:
Will my TWRP 2.8.6.0 backup be valid or should I make a new one?
Click to expand...
Click to collapse
I think it will but not 100% sure, make for sure a new backup with the new recovery image before flashing the new roms
disnomia said:
I think it will but not 100% sure, make for sure a new backup with the new recovery image before flashing the new roms
Click to expand...
Click to collapse
Thank you for your help Disnomia but I am gonna need you once more ^^"
So it didn't work. With both roms I ended up stucked at the meizu logo, not even the spinning flyme logo.
I am gonna explain what I did so please tell me what I did wrong ^^'
1- backup
2- factory reset
3- install the new rom. There was no error message
4- clear cache
5- reboot, with installing SuperSU
6- stuck at meizu logo
7- restore my backup
8- restore successful, no problem.
If you see a mistake somewhere please tell me ^^'
Thanks in advance
Falnhir said:
Thank you for your help Disnomia but I am gonna need you once more ^^"
So it didn't work. With both roms I ended up stucked at the meizu logo, not even the spinning flyme logo.
I am gonna explain what I did so please tell me what I did wrong ^^'
1- backup
2- factory reset
3- install the new rom. There was no error message
4- clear cache
5- reboot, with installing SuperSU
6- stuck at meizu logo
7- restore my backup
8- restore successful, no problem.
If you see a mistake somewhere please tell me ^^'
Thanks in advance
Click to expand...
Click to collapse
Ok get in the recovery wipe dalvik ,system,cache,data
install rom and dont flash super su now
reboot and if you manage to get in
reboot to recovery again and flash super su
This super su I use:
https://mega.nz/#!y5Uk2I4C!T_P7D9KYVSalLz5auMCkCrQafrsACa3DvX7moBq4JaA
disnomia said:
Ok get in the recovery wipe dalvik ,system,cache,data
install rom and dont flash super su now
reboot and if you manage to get in
reboot to recovery again and flash super su
Click to expand...
Click to collapse
please don't blame me but it didnt worked
i did exactely what you said, i flashed the 6A file you linked and when it was finished it said "are you sure you want to reboot? No OS installed". So is the update file corrupted? or is my phone stupid?
thanks again for your help disnomia
Falnhir said:
please don't blame me but it didnt worked
i did exactely what you said, i flashed the 6A file you linked and when it was finished it said "are you sure you want to reboot? No OS installed". So is the update file corrupted? or is my phone stupid?
thanks again for your help disnomia [/QUOTE
Try to download again the rom seems not installed maybe corrupted
It happens also with 6.1.0.0G ?
Click to expand...
Click to collapse
disnomia said:
Try to download again the rom seems not installed maybe corrupted
It happens also with 6.1.0.0G ?
Click to expand...
Click to collapse
Didn't tried the G yet since I am on a 5A right now... It's wierd because I took a look into the update.zip and every file seems to be here... I don't understand why I can't install it... I will try it tomorrow and make my report but if it doesn't work I'll deal with it until I by a new phone ^^
Thanks for your help
Falnhir said:
Didn't tried the G yet since I am on a 5A right now... It's wierd because I took a look into the update.zip and every file seems to be here... I don't understand why I can't install it... I will try it tomorrow and make my report but if it doesn't work I'll deal with it until I by a new phone ^^
Thanks for your help
Click to expand...
Click to collapse
Try also the G version it doesnt matter if you are on A version right now
wipe everything and install it as a new rom
6.1.0.1A is chinese version
6.1.0.0G is international version
disnomia said:
Try also the G version it doesnt matter if you are on A version right now
wipe everything and install it as a new rom
6.1.0.1A is chinese version
6.1.0.0G is international version
Click to expand...
Click to collapse
Yeah I knew that but I wasn't sure if the device verification was removed
The G didn't work, none of the roms worked because it couldn't install the system partition....
I give up and I'll wait for the LG V30 to be available in France...
Thank you so much for your help and your answers disnomia so sorry I couldn't make it work ?
This may sound silly but my phone is already on flyme os 6.1.0.OG. Will flashing this zip with flashify enable me to install other custom ROMs (cynogenmod, mokee)? I have exhausted every effort to unlock the MX4's bootloader because it seems impossible for me to downgrade the international device to 4.2.8.2A to use the apk unlock. I'm also trying my hardest to avoid bricking my device. Any advice would be very much appreciated. Thanks
weichieh007 said:
This may sound silly but my phone is already on flyme os 6.1.0.OG. Will flashing this zip with flashify enable me to install other custom ROMs (cynogenmod, mokee)? I have exhausted every effort to unlock the MX4's bootloader because it seems impossible for me to downgrade the international device to 4.2.8.2A to use the apk unlock. I'm also trying my hardest to avoid bricking my device. Any advice would be very much appreciated. Thanks
Click to expand...
Click to collapse
This roms is only for flashing with custom recovery(twrp), unlocked bootloader.
Trying this roms on official rom it will brick your device.
If you try to downgrade from official 6.1.0.0G to 4.2.8.2A from flashify better try from stock recovery.
disnomia said:
This roms is only for flashing with custom recovery(twrp), unlocked bootloader.
Trying this roms on official rom it will brick your device.
If you try to downgrade from official 6.1.0.0G to 4.2.8.2A from flashify better try from stock recovery.
Click to expand...
Click to collapse
Yeah, I tried using stock recovery to downgrade to 4.2.8.2A but I always get 'Firmware Corrupt' no matter how many times I re-download from different websites. I've even tried going to 4.0.4I before going to 4.2.8.2A but I even got the same 'Firmware Corrupt' message in the stock recovery for the 404I downgrade process.
I've tried these urls:
http://download.meizu.com/Firmware/Flyme/MX4/4.2.8.2/cn/20150422020016/09eb1341/update.zip
http://downloads.meizufans.eu/mx4/firmware/stable/4.2.8.2/a/update.zip
Is this because international version mx4 can't be upgrade or downgrade to 'A' version? Or Android Lolipop roms can't be downgrade to kitkat roms? Please share your thoughts. Thanks
weichieh007 said:
Yeah, I tried using stock recovery to downgrade to 4.2.8.2A but I always get 'Firmware Corrupt' no matter how many times I re-download from different websites. I've even tried going to 4.0.4I before going to 4.2.8.2A but I even got the same 'Firmware Corrupt' message in the stock recovery for the 404I downgrade process.
I've tried these urls:
http://download.meizu.com/Firmware/Flyme/MX4/4.2.8.2/cn/20150422020016/09eb1341/update.zip
http://downloads.meizufans.eu/mx4/firmware/stable/4.2.8.2/a/update.zip
Is this because international version mx4 can't be upgrade or downgrade to 'A' version? Or Android Lolipop roms can't be downgrade to kitkat roms? Please share your thoughts. Thanks
Click to expand...
Click to collapse
Try to downgrade to 4.0.4i and then upgrade to 4.2.8.2A and hope this will be the trick.
https://downloads.meizufans.org/mx4/firmware/stable/4.0.4/i/

LE S3 20 & 21s[official]with OTA updatable[Lock bootloader]

This is totally CLEAN and Typically ENGLISH (OFFICIAL) version that means no chinees APPS no issue.
Donot forget to make a backup before starting.
Steps to Follow: (FOR TWRP installed user)
1. Download 20s OTA file from here.
2. Download 21s OTA file from here. (Donot Download this ZIP file as i got an OTA update of 21S after installing 20s)
3. Goto TWRP recovery.
4. Formate everything. (Cashe, Delvik, Sysytem,Data)
5. Flash the 20s Rom (Provided in STEP 1)
6. After Installing and setting up phone, You are ready to GO BACK to official stock recovery.
Steps to Follow: (FOR already on stock recovery users)
7. Download the 21s recovery (provided in step # 2)
8. change the name to update.zip
9. put it into the root folder.
10. Goto stock updater and slect MANUAL UPDATE from 3dots on top.
11. This is will install the recovery 21s.
12. DONE
Note: you can not install 21s directly on custom recovery as it will give error 7
Can you 1. correct typos 2. move this to https://forum.xda-developers.com/le-2/how-to
Thank you
Thread cleaned up.
If you find some rule violation, please report it.
Also this is not a thread to bring up your personal vendettas. Add the annoying member to your ignore list and move on. No need to use foul language.
Consider this as the first and final warning. If this is repeated any further, there will be action taken against your accounts.
Hope I made myself very clear.
Regards
Vatsal,
Forum Moderator.
I didn't understand, is 26s version available for x522 because it is mentioned in the name of this thread?
zogu said:
I didn't understand, is 26s version available for x522 because it is mentioned in the name of this thread?
Click to expand...
Click to collapse
26s removed
as the provider stopped me to share it. correction in heading done.
Found link on Google's cache of https://forum.xda-developers.com/le-2/how-to/le-s3-20s-21sofficial-ota-lock-t3634079.
But this file update.zip was for s2_india, not for s2_na
Is newer version for usa market available?
zogu said:
Found link on Google's cache of https://forum.xda-developers.com/le-2/how-to/le-s3-20s-21sofficial-ota-lock-t3634079.
But this file update.zip was for s2_india, not for s2_na
Is newer version for usa market available?
Click to expand...
Click to collapse
As I already mentioned that I have tested these file on my x522(S3) before upload.
Nd x52x series means x520/522/526
Download 20s flash it you will receive 21s automatically
zogu said:
I didn't understand, is 26s version available for x522 because it is mentioned in the name of this thread?
Click to expand...
Click to collapse
Original 26s is available in Chinese only. You can flash it via twrp than root nd remove all Chinese app.
Chinese twrp ?
edan lkr said:
Chinese twrp ?
Click to expand...
Click to collapse
Yes.
Sooooo I have a slight problem.
I have TWRP and stock ROM. Sort of. Xtreme Addiction ROM, only one that would work and not give the error"This is an s2 not s2_na_Xxxx" so I Flashed that, and uninstalled root, now in TWRP it doesn't show my internal storage so I can't flash this ROM, and ask for a password. So I tried using the 3dot option from settings and it won't work either, it'll just boot to TWRP and nothing happens. I'm really not looking forward to deleting everything... AGAIN but I will if I have to.
Is there an update for the Le s3 x522 that can be installed though the phone update app? I am still running stock recovery and don't want to change it but it seems the OTA updates not working
Christhepenguin said:
Sooooo I have a slight problem.
I have TWRP and stock ROM. Sort of. Xtreme Addiction ROM, only one that would work and not give the error"This is an s2 not s2_na_Xxxx" so I Flashed that, and uninstalled root, now in TWRP it doesn't show my internal storage so I can't flash this ROM, and ask for a password. So I tried using the 3dot option from settings and it won't work either, it'll just boot to TWRP and nothing happens. I'm really not looking forward to deleting everything... AGAIN but I will if I have to.
Click to expand...
Click to collapse
I think we might be having the same problem...
My X527 came with 16s as the stock ROM.
Upgraded to 19s with TWRP which gives me the system update option as well as OTA (which says I'm running the latest version).
I want to update to 21s and use the system update method..
Phone starts to load the new update (renamed to "update.zip") progress bar at the bottom of the screen while all of this takes place.
Phone reboots into password screen for TWRP, swipe to continue, then select system reboot and once it's back up and running it is still on 19s...?
Did you get your update resolved?
gtd2000 said:
I think we might be having the same problem...
My X527 came with 16s as the stock ROM.
Upgraded to 19s with TWRP which gives me the system update option as well as OTA (which says I'm running the latest version).
I want to update to 21s and use the system update method..
Phone starts to load the new update (renamed to "update.zip") progress bar at the bottom of the screen while all of this takes place.
Phone reboots into password screen for TWRP, swipe to continue, then select system reboot and once it's back up and running it is still on 19s...?
Did you get your update resolved?
Click to expand...
Click to collapse
I did, I used this website. https://www.google.com/amp/s/forum....factory-image-5-8-020s-directly-t3527790/amp/
Downloaded Chinese TWRP from there. As well as that ROM, if you have the 21s update file, I'm sure you can get it working with that TWRP. Hopefully it works for you.
Christhepenguin said:
I did, I used this website. https://www.google.com/amp/s/forum....factory-image-5-8-020s-directly-t3527790/amp/
Downloaded Chinese TWRP from there. As well as that ROM, if you have the 21s update file, I'm sure you can get it working with that TWRP. Hopefully it works for you.
Click to expand...
Click to collapse
What worked for me was replacing TWRP with the factory recovery and I'm good to go.
There was talk of an official update (beyond 21s) in December but so for, no sign of that...
gtd2000 said:
What worked for me was replacing TWRP with the factory recovery and I'm good to go.
There was talk of an official update (beyond 21s) in December but so for, no sign of that...
Click to expand...
Click to collapse
Interesting, replacing stock Recovery didn't work for me when I did it, and yeah. It's most likely not coming soon due to financial issues LeEco has.
Christhepenguin said:
Interesting, replacing stock Recovery didn't work for me when I did it, and yeah. It's most likely not coming soon due to financial issues LeEco has.
Click to expand...
Click to collapse
I note that this says it's the ROM for the S3.
I'm using the X527 which is the S2 with the Snapdragon chip (now listed as X526 after installing 21s), did you perhaps flash the incorrect ROM?
I had continual problems upgrading from 19s with TWRP - it would go through the whole process and then reboot to 19s..
Even after the replacement of the stock recovery, the first ROM I downloaded (21s) was not accepted. Had to download another one for it to finally work.
Could be a bad download?
Contact
How did you contact leeco and get this. I need all future updates. My phone is rooted and I am unable to completely unroot it and get OTAs.
---------- Post added at 02:59 AM ---------- Previous post was at 02:52 AM ----------
rodogg88 said:
Is there an update for the Le s3 x522 that can be installed though the phone update app? I am still running stock recovery and don't want to change it but it seems the OTA updates not working
Click to expand...
Click to collapse
If you don't have TWRP or anything installed, it should work fine if you put the 20s update in the root folder (the folder with the android and download folders). Then just go to system update, press menu, press local update, go through prompts and it should update automatically. Then just repeat the process for the 21s update. If you have twrp installed, I'm pretty sure the chinese ydss version doesn't allow OTA installs. This update requires stock recovery installed because it updates through the recovery. You can find stock recovery images on google (search le s3 stock recovery and click skyneel) or, someone might have posted a recovery image on the le 2 forum. Plz reply if it doesn't work, it worked for me tho.
Is there any bugs? If yes please list. Thank you
does it work for le s3 X626 mtk?
if not, please guide me as I see that this forum support Le S3.
thanks.

Bricked p10+.. Need help..

Hello fellows. I am in a deep sh&*. Maybe someone can help.
I have a p10+ L09 converted to L29, rooted, bootloader unlocked. It was on rooted stock rom. Yesterday, tried to make the update, and something went wrong. Now, I can't install any rom exept future rom or something found here. I've tried rayglobe knife, Huawei multi tool, eRecovery, dload, and no way to install an official rom. I am barely able to install twrp, format data, and install future rom before rebooting.
Tried to extract boot, cust, system from the original rom, but it says finished and bootloop just after the unlocked message. On latest versions, I cant even find them in the update.app..
Any help, any downloadable file or link is really appreciated. Please help...
dj_varizes said:
Hello fellows. I am in a deep sh&*. Maybe someone can help.
I have a p10+ L09 converted to L29, rooted, bootloader unlocked. It was on rooted stock rom. Yesterday, tried to make the update, and something went wrong. Now, I can't install any rom exept future rom or something found here. I've tried rayglobe knife, Huawei multi tool, eRecovery, dload, and no way to install an official rom. I am barely able to install twrp, format data, and install future rom before rebooting.
Tried to extract boot, cust, system from the original rom, but it says finished and bootloop just after the unlocked message. On latest versions, I cant even find them in the update.app..
Any help, any downloadable file or link is really appreciated. Please help...
Click to expand...
Click to collapse
What error/behaviour are you getting from erecovery?
Plop
Hello mate. Thanks for your time.
ERecovery crash everytime at 5%. If I try to download via erecovery, it doesn't download.
I've tried to extract the files from update. App, and inject them via fastboot. It goes to the end of the operation, but once rebooted, it bootloop before the Huawei logo..
I don't understand what happens.. It's like if the phone don't want the original firmware anymore..
If you have any files to propose me, I really want to try tonight...
Can you somehow recover your original oeminfo with TWRP and retry erecovery? That's how I got out of a similar situation, although I can't say for sure whether I really had the same root cause.
Hmm not sure that the oem info is ok or corrupted...
That's what I am affraid of..
I will try in a moment to see..
If it's corrupted, that means the phone is dead?
In that case you could try funkyhuawei, they provide their own oeminfo and erecovery connection. They do cost money though.
May I ask what makes you want to go away from the fromfuture ROM?
This... Android 5.1, emui 3.1
I don't know if iam becoming stupid with age, but can't find any more recent... And with the kids yelling on my back.... Lol
Well, I found a recent rom from future. Had some troubles with Android locking magisk, but now it's working ( update magisk before putting your Gmail account and restore). For now it's working fine. Just had a few freezes here and there but since this morning it's going fine. I think I'll stay with it for now.
Thanks for the people who tried to help me.
XDa rules!

Help with soft brick

Hi guys,
I got the ASUS Zenfone 3 Zoom and started playing with it. Unfortunately I managed to soft brick it and somehow I can't go back to stock. Here are all the things I did. I would be happy to get any ideas what to try next:
1. unlocked the bootloader - using asus's official unlock tool
2. flashed twrp recovery - twrp-3.2.1-0-Z01H-20180304.img, using:
adb reboot bootloader
fastboot flash recovery twrp.img
3. updated asus's firmware to the latest official one:
copying UL-Z01H-WW-71.60.139.30.zip onto internal memory
android detects the update and applying it using android
4. Enabling lock pattern at boot (from android settings). Correct pattern required even when booting into recovery
5. Installing supersu via twrp:
adb reboot recovery
installing supersu
wiping caches (the cache partition cannot be wiped)
6. SuperSu working (tested via android)
7. Reading about Magisk. Trying to install magisk via twrp. Magisk's installer complained that the system is not vanilla (due to SuperSu modifications). Have to uninstall SuperSu to return to previous state.
8. Tried uninstalling SuperSu from the program itself (in android). The uninstaller got stuck. The phone become unresponsive and had to reboot.
9. Found a script packaged as an executable zip (to be installed via twrp) that will uninstall SuperSu and return system to pristine state (SuperSu makes a backup of the files it changes before installation) - UPDATE-unSU-signed.zip. Uninstallation worked.
10. Magisk installation still complained about the bootloader. Then things started to go wrong. I unpacked the latest firware UL-Z01H-WW-71.60.139.30.zip, took out boot.img and tried to flash just the bootloader
fastboot flash boot boot.img
11. Upon reboot the phone got stuck at the ASUS logo. Reboot into recovery and into fastboot still works (soft brick). Still shows unlock pattern at boot.
12. I tried flashing the original firmware using TWRP (install a zip). However the installation threw some errors. Unsuccessful.
13. I've tried flashing the system.img from the original firware using fastboot but still it's stuck at the ASUS logo at boot.
fastboot flash system system.img
Here I am stuck. I've read that TWRP cannot install properly the ASUS official firmware but if you flash the original recovery, it can probably flash it properly. Another thing that I think might explain why I cannot get out of the soft brick is that I've enabled the lock pattern at boot, which effectively encrypted some parts of the phone and I have a strong feeling this interferes with the boot process. I will look for a script/installable zip (via twrp) that can remove the lock.
I really need ideas/suggestions before I make something that will turn my phone into a hard brick. Thanks.
What you need to do is flash stock MM recovery from bootloader using "fastboot flash recovery recovery.img"
Since it came with MM preloaded you'll have to install the ROM using stock recovery via adb. It'll take a while, but after that you should upgrade to the latest MM update.
After that, update to any Nougat patch update you wish to receive, because I still haven't figured out yet how to apply them all with @shakalaca's recovery images.
Once you're done, you can install twrp again and flash magisk.
Good luck and hope this helped you
Thanks
+)KEV1N(+ said:
What you need to do is flash stock MM recovery from bootloader using "fastboot flash recovery recovery.img"
Since it came with MM preloaded you'll have to install the ROM using stock recovery via adb. It'll take a while, but after that you should upgrade to the latest MM update.
After that, update to any Nougat patch update you wish to receive, because I still haven't figured out yet how to apply them all with @shakalaca's recovery images.
Once you're done, you can install twrp again and flash magisk.
Good luck and hope this helped you
Click to expand...
Click to collapse
Thanks,
I tried to find a stock recovery images but unsuccessful. Can you tell me where to get it from?
Here's a link to Shakalaca's recovery images.
In the Old folder you'll find MM stock recoveries.
https://mega.nz/#F!p90wgAaY!l1JbJilmAUEKTKWu43pT9w!I89QgZpK
Flash 11.40.86.75 recovery
Boot into recovery
Flash 11.40.86.75 stock rom via adb (it'll take a while)
Once it's done, boot into Android.
Download your respective region's latest MM rom.
Send it to your micro sd.
Install it once Android detects the update file.
(It won't work with custom recovery. I tried every recovery Shakalaca has and only those two seem to work)
Once on the latest MM rom install any nougat patch update you wish to apply, because once you have a nougat rom, you can't boot stock recovery. (As far as my testings went)
So if I were you, I'd go for any update after the zenui 4.0 update since it's a bit better looking imo.
After that final update you can flash TWRP to root your phone. I prefer using magisk, since it doesn't modify the system files.
All you need to do is flash magisk and that's it. No need for SuperSU or anything else. And by any means, do NOT wipe your cache partition once you flash TWRP, otherwise you'll get stuck on the Asus logo during boot.
If you wish to retain the "certified" status in google play store's device certification, do NOT go into the play store before installing magisk. Also, don't delete play store data, otherwise you'll lose your previous purchases.
This post was longer than I initially thought it'd be, but I guess this sums it up pretty well.
Good luck
+)KEV1N(+ said:
Here's a link to Shakalaca's recovery images.
In the Old folder you'll find MM stock recoveries.
-- [link] removed due to XDA regulations
Flash 11.40.86.75 recovery
Boot into recovery
Flash 11.40.86.75 stock rom via adb (it'll take a while)
Once it's done, boot into Android.
Download your respective region's latest MM rom.
Send it to your micro sd.
Install it once Android detects the update file.
(It won't work with custom recovery. I tried every recovery Shakalaca has and only those two seem to work)
Once on the latest MM rom install any nougat patch update you wish to apply, because once you have a nougat rom, you can't boot stock recovery. (As far as my testings went)
So if I were you, I'd go for any update after the zenui 4.0 update since it's a bit better looking imo.
After that final update you can flash TWRP to root your phone. I prefer using magisk, since it doesn't modify the system files.
All you need to do is flash magisk and that's it. No need for SuperSU or anything else. And by any means, do NOT wipe your cache partition once you flash TWRP, otherwise you'll get stuck on the Asus logo during boot.
If you wish to retain the "certified" status in google play store's device certification, do NOT go into the play store before installing magisk. Also, don't delete play store data, otherwise you'll lose your previous purchases.
This post was longer than I initially thought it'd be, but I guess this sums it up pretty well.
Good luck
Click to expand...
Click to collapse
Thanks, I managed to flash 11.40.86.75 and stock ROM using your instructions. I will look now into updating and applying magisk. Just a final question. You mentioned to install Nougat patch update and not a full firmware, but my phone came preloaded with Nougat. Will this be a problem? I installed stock 71.60.139.30 and it worked fine (i was able to boot into twrp).
mollonado said:
Thanks, I managed to flash 11.40.86.75 and stock ROM using your instructions. I will look now into updating and applying magisk. Just a final question. You mentioned to install Nougat patch update and not a full firmware, but my phone came preloaded with Nougat. Will this be a problem? I installed stock 71.60.139.30 and it worked fine (i was able to boot into twrp).
Click to expand...
Click to collapse
Sorry I misread your comment. I'm updating to the latest ROM and installing TWRP. Thanks for the help.
mollonado said:
Sorry I misread your comment. I'm updating to the latest ROM and installing TWRP. Thanks for the help.
Click to expand...
Click to collapse
Glad to help!
---------- Post added at 01:33 PM ---------- Previous post was at 01:30 PM ----------
mollonado said:
Thanks, I managed to flash 11.40.86.75 and stock ROM using your instructions. I will look now into updating and applying magisk. Just a final question. You mentioned to install Nougat patch update and not a full firmware, but my phone came preloaded with Nougat. Will this be a problem? I installed stock 71.60.139.30 and it worked fine (i was able to boot into twrp).
Click to expand...
Click to collapse
It came preloaded with Nougat? Interesting.
+)KEV1N(+ said:
Glad to help!
---------- Post added at 01:33 PM ---------- Previous post was at 01:30 PM ----------
It came preloaded with Nougat? Interesting.
Click to expand...
Click to collapse
Hi I managed to flash stock ROM - 71.60.139.30, but after that I can't flash twrp - twrp-3.2.1-0-Z01H-20180304.img. I tried with:
adb reboot bootloader
fastboot flash recovery twrp.img
but when I try to boot into recovery with:
adb reboot recovery
it goes into the stock recovery. Is there something I missed? Do I need to downgrade to flash TWRP?
mollonado said:
Hi I managed to flash stock ROM - 71.60.139.30, but after that I can't flash twrp - twrp-3.2.1-0-Z01H-20180304.img. I tried with:
adb reboot bootloader
fastboot flash recovery twrp.img
but when I try to boot into recovery with:
adb reboot recovery
it goes into the stock recovery. Is there something I missed? Do I need to downgrade to flash TWRP?
Click to expand...
Click to collapse
Quick question: which of these warnings do you get when you boot?
https://www.androidauthority.com/go...rrupted-and-modified-android-software-629180/
Also, did you try power cycling to get it to boot?
And since the version number made such a large jump, I believe they must have changed something internally with the latest update and that it's probably going to be one of the last Nougat updates before Oreo (which was delayed until June).
I still need to update to that version to check it out, but I might reset soon since I was waiting for Oreo to reset.
+)KEV1N(+ said:
Quick question: which of these warnings do you get when you boot?
https://www.androidauthority.com/go...rrupted-and-modified-android-software-629180/
Also, did you try power cycling to get it to boot?
And since the version number made such a large jump, I believe they must have changed something internally with the latest update and that it's probably going to be one of the last Nougat updates before Oreo (which was delayed until June).
I still need to update to that version to check it out, but I might reset soon since I was waiting for Oreo to reset.
Click to expand...
Click to collapse
I have the Orange warning. It looks a bit different but the wording is the same. Yes, i tried powercycling and still I boot into the stock recovery. What can I do now? Is it possible to downgrade? I am not sure if I boot into stock recovery if it will let me flash an older stock ROM.
mollonado said:
I have the Orange warning. It looks a bit different but the wording is the same. Yes, i tried powercycling and still I boot into the stock recovery. What can I do now? Is it possible to downgrade? I am not sure if I boot into stock recovery if it will let me flash an older stock ROM.
Click to expand...
Click to collapse
I read here - https://android.gadgethacks.com/how-to/twrp-101-install-best-custom-recovery-for-android-0179547/
that once you flash twrp Android upon next reboot might overwrite it with the stock recovery. Is that possible?
mollonado said:
I read here - https://android.gadgethacks.com/how-to/twrp-101-install-best-custom-recovery-for-android-0179547/
that once you flash twrp Android upon next reboot might overwrite it with the stock recovery. Is that possible?
Click to expand...
Click to collapse
So, how did you flash TWRP exactly? Using that guide? Or flashed through bootloader?
And to answer your question: yes, it happens sometimes.
+)KEV1N(+ said:
So, how did you flash TWRP exactly? Using that guide? Or flashed through bootloader?
And to answer your question: yes, it happens sometimes.
Click to expand...
Click to collapse
Hi, I managed to get around it by directly booting into TWRP from fastboot. Yes, apparently unless I flash some TWRP files to the system partition upon next reboot, the recovery will return to stock. Anyway, I managed to install Magisk and Exposed framework and have been poking with those two for the last couple of days.
The youtube vanced app is great, but I found something that worries me. I can't login to facebook/twitter. I checked and the reason is I can't connect to the facebook.com or twitter.com https sites (even over chrome). I think either:
- I've installed some module which is messing with that
- my rooted phone is hacked
I've installed a module that is meant as ad blocker, that updates the hosts file. However I removed all modules and the problem remains. I really don't wanna start all over again just to check. And even if I reflash and it works, I will not know what caused it and how to fix it myself next time. Do you have any ideas on how to figure out what the problem is?
Regards,
mollonado said:
Hi, I managed to get around it by directly booting into TWRP from fastboot. Yes, apparently unless I flash some TWRP files to the system partition upon next reboot, the recovery will return to stock. Anyway, I managed to install Magisk and Exposed framework and have been poking with those two for the last couple of days.
The youtube vanced app is great, but I found something that worries me. I can't login to facebook/twitter. I checked and the reason is I can't connect to the facebook.com or twitter.com https sites (even over chrome). I think either:
- I've installed some module which is messing with that
- my rooted phone is hacked
I've installed a module that is meant as ad blocker, that updates the hosts file. However I removed all modules and the problem remains. I really don't wanna start all over again just to check. And even if I reflash and it works, I will not know what caused it and how to fix it myself next time. Do you have any ideas on how to figure out what the problem is?
Regards,
Click to expand...
Click to collapse
First off, my apologies for this late reply (Been superbusy with school and internship assignments)
Secondly, and that is why I only use magisk. Because once you mess with the host file, depending on what module you install, it can range from tripping safetynet to bootlooping.
So quick question, is it still in this state right now since 9 days ago?
Greetings,
Kevin
+)KEV1N(+ said:
Here's a link to Shakalaca's recovery images.
In the Old folder you'll find MM stock recoveries.
https://mega.nz/#F!p90wgAaY!l1JbJilmAUEKTKWu43pT9w!I89QgZpK
Flash 11.40.86.75 recovery
Boot into recovery
Flash 11.40.86.75 stock rom via adb (it'll take a while)
Once it's done, boot into Android.
Download your respective region's latest MM rom.
Send it to your micro sd.
Install it once Android detects the update file.
(It won't work with custom recovery. I tried every recovery Shakalaca has and only those two seem to work)
Once on the latest MM rom install any nougat patch update you wish to apply, because once you have a nougat rom, you can't boot stock recovery. (As far as my testings went)
So if I were you, I'd go for any update after the zenui 4.0 update since it's a bit better looking imo.
After that final update you can flash TWRP to root your phone. I prefer using magisk, since it doesn't modify the system files.
All you need to do is flash magisk and that's it. No need for SuperSU or anything else. And by any means, do NOT wipe your cache partition once you flash TWRP, otherwise you'll get stuck on the Asus logo during boot.
If you wish to retain the "certified" status in google play store's device certification, do NOT go into the play store before installing magisk. Also, don't delete play store data, otherwise you'll lose your previous purchases.
This post was longer than I initially thought it'd be, but I guess this sums it up pretty well.
Good luck
Click to expand...
Click to collapse
I made a mistake and could not install recovery stock, I followed what you wrote in the beginning install MM recovery and so I did a hard reset and I was able to install the most current recovery stock and installed ROM Oreo, Thanks. Sorry, I'm on google translator.

Categories

Resources