hello all,
i have probs here that my zen5 cant access to fastboot when in push on + volume up..
error show " No Command "
please help me, i search many solution but still cant solve..
problem solve after i upload new image trow adb sideload..
ariffantasi said:
hello all,
i have probs here that my zen5 cant access to fastboot when in push on + volume up..
error show " No Command "
please help me, i search many solution but still cant solve..
Click to expand...
Click to collapse
Just press, at the same time, the Power and Volume Up buttom when you are in this screen.
Related
Can somebody please clarify for me, how do you get into fastboot mode ? Some have written volume + ; some volume - and power simultaneusly. Which ?
doomking_99 said:
Can somebody please clarify for me, how do you get into fastboot mode ? Some have written volume + ; some volume - and power simultaneusly. Which ?
Click to expand...
Click to collapse
FASTBOOT: Volume Down + Power
RECOVERY: Volume Up + Power
I know this is in the wrong thread but ....
When I press volume down + power the phone just reboots normally. So what am I doing wrong ?
doomking_99 said:
I know this is in the wrong thread but ....
When I press volume down + power the phone just reboots normally. So what am I doing wrong ?
Click to expand...
Click to collapse
1. Ensure that you are holding down volume down until it shows you the fastboot screen.
2. If that didn't work connect your phone to your pc and use the adb command
Code:
adb reboot fastboot
or
Code:
fastboot reboot fastboot
whichever one works.
For things like this you could open a new thread just to make sure your problem is being seen. I guarantee you only very few people will actually see this.
doomking_99 said:
I know this is in the wrong thread but ....
When I press volume down + power the phone just reboots normally. So what am I doing wrong ?
Click to expand...
Click to collapse
The most easiest way of going to fastboot is to hold down volume down button and after 3-4 seconds connect your device to computer via a USB cable. That's it!
PCSE said:
1. Ensure that you are holding down volume down until it shows you the fastboot screen.
2. If that didn't work connect your phone to your pc and use the adb command
Code:
adb reboot fastboot
or
Code:
fastboot reboot fastboot
whichever one works.
For things like this you could open a new thread just to make sure your problem is being seen. I guarantee you only very few people will actually see this.
Click to expand...
Click to collapse
Didn't work either way.
doomking_99 said:
Didn't work either way.
Click to expand...
Click to collapse
of course the correct command is :
Code:
adb reboot bootloader
mfbcool said:
The most easiest way of going to fastboot is to hold down volume down button and after 3-4 seconds connect your device to computer via a USB cable. That's it!
Click to expand...
Click to collapse
O-Yeah, that worked for me, i wonder why volume down+ power is not working anymore. Thanks :good:
The command "adb reboot bootloader" worked for me and I am fastboot screen (green android guy) an at the bottom it is written that my device is unlocked. But when I try to flash TWRP (for P8 lite - found in this forum) it fails with Failed (remote command not allowed) written. Why and what am I doing wrong ? Can anyone help ?
So, i was following this tutorial on how-to set up TWRP and Root my OP2.
Everything seemed to be going to plan until the final step where i reboot my phone & now its stuck on the little animation screen with the red & two little white dots..
have absolutely no idea how to fix this help? anyone? PLEASE!!!!
ps. tried holding down power & volume down (nothing happens) also tried using the command prompt on windows but its 'Waiting for device' if any of that helps the cause.
eoinkearney95 said:
So, i was following this tutorial on how-to set up TWRP and Root my OP2.
Everything seemed to be going to plan until the final step where i reboot my phone & now its stuck on the little animation screen with the red & two little white dots..
have absolutely no idea how to fix this help? anyone? PLEASE!!!!
ps. tried holding down power & volume down (nothing happens) also tried using the command prompt on windows but its 'Waiting for device' if any of that helps the cause.
Click to expand...
Click to collapse
Try flashing stock rom through fastboot: http://www.androidsage.com/2016/03/12/restore-oneplus-2-full-stock-firmware/
Try Flashing stock rom through TWRP: http://downloads.oneplus.net/oneplus-2/oneplus_2_oxygenos_3.0.2/
You said that you are unable to get to recovery with the volume keys but I think you are doing it wrong. So to get to recovery power off the device by holding the power button. And then keep holding volume down and power button until you see the oneplus logo and feel the vibration. Let go of both of the buttons once the vibration finish's because if do it to early it will not go to twrp. If if does not work try multiple times
Dead oneplus2.
Hi guys and thanks to all xda community for helping us. I tried to upgrade from 2.0.2 to 3.0.2. But after the instalation my oneplus2 stucks into bootlogo(powered by android). Before i try to upgrade i forgot to enable on system oem unlocking. Now i'm not having access to recovery option,when i try to press volume- +power the op2 vibrate and flashes the screen till i stop pressing the power button,and when i try to enable oem via fastboot always get this message: <remote oem unlock is disabled>. I tried so many option but always getting this message: remote oem unlock is disabled. Please help me...
eoinkearney95 said:
So, i was following this tutorial on how-to set up TWRP and Root my OP2.
/QUOTE]
@eoinkearney95 did you installed the proper version of Supersu..?
Click to expand...
Click to collapse
Bibin John said:
eoinkearney95 said:
So, i was following this tutorial on how-to set up TWRP and Root my OP2.
/QUOTE]
@eoinkearney95 did you installed the proper version of Supersu..?
Click to expand...
Click to collapse
I dont know. i tried to instal the 3.0.2 sending the firmware to the folder downloads and then i restarted the op2 in recovery mode and the choosed the option to instal from the internal storage.
Click to expand...
Click to collapse
ciroportugues said:
Hi guys and thanks to all xda community for helping us. I tried to upgrade from 2.0.2 to 3.0.2. But after the instalation my oneplus2 stucks into bootlogo(powered by android). Before i try to upgrade i forgot to enable on system oem unlocking. Now i'm not having access to recovery option,when i try to press volume- +power the op2 vibrate and flashes the screen till i stop pressing the power button,and when i try to enable oem via fastboot always get this message: <remote oem unlock is disabled>. I tried so many option but always getting this message: remote oem unlock is disabled. Please help me...
Click to expand...
Click to collapse
Try this mega unbrick guide and try all the methods if the other ones do not work: https://forums.oneplus.net/threads/...ck-guide-for-a-hard-bricked-oneplus-2.347607/
Please help me , I updated my Huawei P8 gra-ul00 but using firmware from ( gra-ul21 ) and now it is totally OFF , even when I connect it to charger no led will be turn on , and when I connect it to PC I hear beep in my PC but the phone is OFF and no response!
Note: I tried Power button + volume buttons multiple times but no success ! :/
Sorry for my bad English .
I appreciate your response ..
saeed.sys said:
Please help me , I updated my Huawei P8 gra-ul00 but using firmware from ( gra-ul21 ) and now it is totally OFF , even when I connect it to charger no led will be turn on , and when I connect it to PC I hear beep in my PC but the phone is OFF and no response!
Note: I tried Power button + volume buttons multiple times but no success ! :/
Sorry for my bad English .
I appreciate your response ..
Click to expand...
Click to collapse
Test by pressing the volume down button and connect it to the pc, it will enter fastboot mode and you will be able to flash boot, system, cust and recovery and recover your device
lespaul79 said:
Test by pressing the volume down button and connect it to the pc, it will enter fastboot mode and you will be able to flash boot, system, cust and recovery and recover your device
Click to expand...
Click to collapse
Thanks for your reply lespaul79 , but you mean only pressing Volume Down ? I tried and nothing happen the screen still Black and after applying any fastboot command it shown " Waiting for the device " message ! .
Any other suggestion ?
saeed.sys said:
Thanks for your reply lespaul79 , but you mean only pressing Volume Down ? I tried and nothing happen the screen still Black and after applying any fastboot command it shown " Waiting for the device " message ! .
Any other suggestion ?
Click to expand...
Click to collapse
Press volume down without releasing connect to pc, do not release volume down until bootloader mode appears on the screen
hi all ,flashed rom without twrp and phone stuck in boot loop with logo ,power button plus volume up ,powers off then power button with volume down should get recovery ,not with this noobs phone, lol. I get qualcom crash mode with the reading attempted to kill ! exitcode=0x0000000 _______ do_exit ,any help would be gratefull ????
Can you access fastboot/bootloader mode? Try holding power button + volume up when the phone is already off. If you are able to get to fastboot mode then you can flash TWRP using ADB from there.
Use msm download tool
mingo_mgx said:
Use msm download tool
Click to expand...
Click to collapse
Thought my phone was a paperweight there lol and thanks for info ,used Msm download tool ,but for anyone else in my position,I found I had to disable signature verification on Windows 10 before pc found phone ,if that helps but it does work!
hey, anybody knows if the oldschool app 'triangleaway' works on Galaxy A40? i know that it absolutly works on A3 2017. and 2nd question, is it possible to close bootloader after rooting on A40 without any issues?
HOW TO FIX DEADSCREEN? CANT DO RECOVERY MODE, CANT DO DOWNLOAD MODE, CANT FLASH.. WHAT SHOULD I DO PLEASE HELP ME,ALSO THE PROBLEM APPEARING WHEN I GO THROUGH ADB ,(unauthorized device) and getting error of Vendor key is not set.. pls help me anyone. what should i do. thanks in advance
what's the reason for your issue?
what have you done?
have you tried to do a reset via holding
vol up + vol down + power button
for 10 seconds?