Sensors not working on cm13 - Wileyfox Storm

On every cm13 build there is a weird bug. After 1st locking screen after reboot sensors stop working. In asphalt 8 i cant control game(accelerometer) and autorotation and i beieve many other sensors. Is there any fix for that issue?

The next nightly build includes a sensor related fix,
Revert "sensors: use boot time as reference time"
Click to expand...
Click to collapse
anyone have enough time to try and report back?
http://www.cmxlog.com/13/kipper/

I will try when it will be availble

tried 20160226 build and it doesnt work after locking the screen twice, after a minute or two. So it's the same.
It's working. Read my last post on this thread

aciupapa said:
tried 20160226 build and it doesnt work after locking the screen twice, after a minute or two. So it's the same.
Click to expand...
Click to collapse
Thats a shame, thanks for reporting back.

I rebooted device and on latest build it seems to work . I wil test a little bit more and i will tell. As for now 8 hours on new build and sensors are working

Yep on latest build sensors work perfectly

aciupapa said:
Yep on latest build sensors work perfectly
Click to expand...
Click to collapse
Great stuff, thanks again for letting us know.

Gyroscope working on 13.1.2-ZNH2KAS4YE-kipper, OTA received this weekend.

Related

[Q] Phone is frozen after a call

So I switched to GB from WM65 and found it's pretty slow but usable. I don't have time to switch back to WM65 so I'll stick with GB.
Now, one big issue I have is the phone app (not wifi app, just plain phone). When I dial a number, the screen goes black to prevent pressing the wrong button with your ear etc. Problem is, I can't get back to the screen, meaning I don't have access to the dialpad. Annoying when you're on queue and you need to press a key to get to a menu... like repeat a message on your messagebank for instance.
Second issue, is after the call, the phone is frozen for about a minute or two. Nothing responds. Then it comes back alive.
I haven't found any threads on this, though users seem to complain about wifi calling, which is not my case.
Anyone has seen this ?
Txs.
Can you please tell us which ROM that is?
I know that this issue was fixed, but maybe your ROM is just too old. Or maybe the developer didn't include the fix.
I had this problem with almost every gingerbread build on my HD2.
Im not sure what's causing it, but i fixed this issue by installing screebl lite from play store. While this app enabled, phone would wake up normally after a call in 99.9% of the cases. You should try the same.
Strangely, i don't have any issues on ICS or JB roms.
Marvlesz said:
Can you please tell us which ROM that is?
I know that this issue was fixed, but maybe your ROM is just too old. Or maybe the developer didn't include the fix.
Click to expand...
Click to collapse
Android Version 2.3.7
Baseband Version 15.42.50.11U_2.15.50.14
Kernel Version 2.6.32.15_tytung_gb_r16 [email protected] #292
Build nr GWK74 (nexusHD-Gingerbread V3.3a) DataOnEXT
Got it from this dude http://forum.xda-developers.com/showthread.php?t=905060
So there is a patch ?
Boags said:
Android Version 2.3.7
Baseband Version 15.42.50.11U_2.15.50.14
Kernel Version 2.6.32.15_tytung_gb_r16 [email protected] #292
Build nr GWK74 (nexusHD-Gingerbread V3.3a) DataOnEXT
Got it from this dude http://forum.xda-developers.com/showthread.php?t=905060
So there is a patch ?
Click to expand...
Click to collapse
Okay, I have looked throughout that thread's pages, and it seems that you're not the only one with that problem. So apparently the ROM doesn't have the fix (which is weird, because tytung almost always fixes everything in a rom before moving onto another one).
You're better off changing the ROM, or maybe trying to figure out what is wrong with your device and those who're facing the same issue.
Marvlesz said:
Okay, I have looked throughout that thread's pages, and it seems that you're not the only one with that problem. So apparently the ROM doesn't have the fix (which is weird, because tytung almost always fixes everything in a rom before moving onto another one).
You're better off changing the ROM, or maybe trying to figure out what is wrong with your device and those who're facing the same issue.
Click to expand...
Click to collapse
Thanks Marv, so...no hotfix ? no patch ? just change ROM ? this is silly :|
Boags said:
Thanks Marv, so...no hotfix ? no patch ? just change ROM ? this is silly :|
Click to expand...
Click to collapse
Well, the fix wasn't a flashable zip, it was implemented. It was a problem with the proximity sensor if I recall correctly. And since I don't use this ROM, I can't really help you much.
I tried googling the problem (it's fun, you should try it) and this came up : http://forum.xda-developers.com/showthread.php?t=1376251
Your sensor/screen could be dirty making it hard for the proximity to detect. You can try another non-GB ROM and see if the problem is still present.
I am sorry I can't help.
Marvlesz said:
Well, the fix wasn't a flashable zip, it was implemented. It was a problem with the proximity sensor if I recall correctly. And since I don't use this ROM, I can't really help you much.
I tried googling the problem (it's fun, you should try it) and this came up : http://forum.xda-developers.com/showthread.php?t=1376251
Your sensor/screen could be dirty making it hard for the proximity to detect. You can try another non-GB ROM and see if the problem is still present.
I am sorry I can't help.
Click to expand...
Click to collapse
Right, I'll go with the hypothesis that a dirty screen hinders proximity sensors. That should affect a black screen DURING a call (issue I'm also facing) but that should not affect the phone once the call is terminated, should it ? What I mean is, in my case, when I hang up a call, I can't use my phone for a couple of minutes, until it comes back to life. I will get a new "screen protector" and see what happens in the meantime though.
As for a hotfix, seems odd there is none out there. Thanks for trying.

Smart Lock not working 90% of the time.

Currently running the latest Chroma rom with the stock kernel. The little circle that's supposed to show up around the lock icon at the bottom doesn't show up 90% of the time (http://prntscr.com/abhku3). I'm trying to unlock it with a bluetooth (not NFC) fitness band.
This isn't a problem with the band, because I tried putting Face Unlock as well, but the detection doesn't show up most of the time.
Is there any way to fix this?
sixaxis94 said:
Currently running the latest Chroma rom with the stock kernel. The little circle that's supposed to show up around the lock icon at the bottom doesn't show up 90% of the time (http://prntscr.com/abhku3). I'm trying to unlock it with a bluetooth (not NFC) fitness band.
This isn't a problem with the band, because I tried putting Face Unlock as well, but the detection doesn't show up most of the time.
Is there any way to fix this?
Click to expand...
Click to collapse
I haven't had an issue with smart unlock before, I pair it with my Moto 360. I don't know if it's the kernel because I personally use the Taurus kernel and not the stock one, that might be a reason but again I don't know for sure at all. Maybe on Multirom I'll install a second Chroma and leave it on stock and see if I can get it to reproduce what you're having, I'll get back to you in about 20-30 minutes on how it goes.
-Edit- Might be a bit longer since I need to redownload the latest build. My internet can be slow at times
-Edit 2- I haven't had the issue, at least with my watch. Not too sure how much further I could help you :/
fireball0093 said:
I haven't had an issue with smart unlock before, I pair it with my Moto 360. I don't know if it's the kernel because I personally use the Taurus kernel and not the stock one, that might be a reason but again I don't know for sure at all. Maybe on Multirom I'll install a second Chroma and leave it on stock and see if I can get it to reproduce what you're having, I'll get back to you in about 20-30 minutes on how it goes.
-Edit- Might be a bit longer since I need to redownload the latest build. My internet can be slow at times
-Edit 2- I haven't had the issue, at least with my watch. Not too sure how much further I could help you :/
Click to expand...
Click to collapse
Thanks for helping out! I tried with the Quanta v10 kernel but had the same problem. Reinstalled the rom. No dice :/
This is strange
sixaxis94 said:
Thanks for helping out! I tried with the Quanta v10 kernel but had the same problem. Reinstalled the rom. No dice :/
This is strange
Click to expand...
Click to collapse
It is a bit strange. I do have one final thing to test out actually. I just remembered my girlfriend got a generic bluetooth fitness band thing for her senior year, I'll charge that up and see if that gives the same issue since I still have the multirom boot with it. It'll take probably an hour to charge it since it's just a generic one.
fireball0093 said:
It is a bit strange. I do have one final thing to test out actually. I just remembered my girlfriend got a generic bluetooth fitness band thing for her senior year, I'll charge that up and see if that gives the same issue since I still have the multirom boot with it. It'll take probably an hour to charge it since it's just a generic one.
Click to expand...
Click to collapse
I'm certain it's not the band's fault cause gave unlock isn't detected either. I'll try the pure nexus and cm roms to see if it makes a difference.
sixaxis94 said:
I'm certain it's not the band's fault cause gave unlock isn't detected either. I'll try the pure nexus and cm roms to see if it makes a difference.
Click to expand...
Click to collapse
Especially if the band was working fine on other roms or devices. CM 13 is my main daily driver rom and I haven't had a single issue with several bluetooth devices I own, I always will recommend it xD The fitness band is almost charged and I'll test that out here real soon
fireball0093 said:
Especially if the band was working fine on other roms or devices. CM 13 is my main daily driver rom and I haven't had a single issue with several bluetooth devices I own, I always will recommend it xD The fitness band is almost charged and I'll test that out here real soon
Click to expand...
Click to collapse
I only got the band 2 days ago and have just tested it on Chroma.
Quick question, does CM13 support Volume Key to unlock AND double tap status/nav bar to lock? My power button is screwed up and it barely registers. Also, are the latest nightlies stable or should I go with an older build, if I don't plan to update my rom in the next month?
sixaxis94 said:
I only got the band 2 days ago and have just tested it on Chroma.
Quick question, does CM13 support Volume Key to unlock AND double tap status/nav bar to lock? My power button is screwed up and it barely registers. Also, are the latest nightlies stable or should I go with an older build, if I don't plan to update my rom in the next month?
Click to expand...
Click to collapse
Double tap to sleep, yes. Let me quick boot into it to make sure for the volume key. If you get Kernel Auditor and the right kernel you can have double tap to wake which is wonderful. Ok it does have the option for volume key unlock. I haven't had any issues with the nightlies, a while back I had one that would randomly freeze my touchscreen but that was early last month.
fireball0093 said:
Double tap to sleep, yes. Let me quick boot into it to make sure for the volume key. If you get Kernel Auditor and the right kernel you can have double tap to wake which is wonderful. Ok it does have the option for volume key unlock. I haven't had any issues with the nightlies, a while back I had one that would randomly freeze my touchscreen but that was early last month.
Click to expand...
Click to collapse
Sweet, I'll give CM a shot! I hope the smart unlock was a rom problem and not a hardware one. My phone's nearing the end of it's life, so it's more than possible.
sixaxis94 said:
Sweet, I'll give CM a shot! I hope the smart unlock was a rom problem and not a hardware one. My phone's nearing the end of it's life, so it's more than possible.
Click to expand...
Click to collapse
How's CM holding up for you? Is Smartunlock working on it at all?
fireball0093 said:
How's CM holding up for you? Is Smartunlock working on it at all?
Click to expand...
Click to collapse
I haven't gotten around to it yet. I'll try it later this week and report back
fireball0093 said:
How's CM holding up for you? Is Smartunlock working on it at all?
Click to expand...
Click to collapse
It was a problem with Chroma. I'm running CM now and the Smart Lock works flawlessly!
sixaxis94 said:
It was a problem with Chroma. I'm running CM now and the Smart Lock works flawlessly!
Click to expand...
Click to collapse
Glad to hear it's working! I've been having some issues on Marshmallow in general lately, contacts aren't syncing from Google. But, I'm gonna open up my own help thread for that xD

[BEER REWARD :)] GPS Not working on my Note 3 (tried EVERYTHING)

Hi all, I tried everything I found on the Internet.
I thought it was a cable problem, a contact problem.
I opened and closed my Note 3 several times with no luck.
This is what happens: my GPS cannot fix any satellite.
I made a video to show what happens.
Note that it was trying to fix since about 30 minutes.
Whoever is able to help me solving this problem has a free beer as a reward
Welcome to the club buddy.
This is happening on a stock rom?
Riqz said:
Welcome to the club buddy.
Click to expand...
Click to collapse
Not the answer I was hoping
audit13 said:
This is happening on a stock rom?
Click to expand...
Click to collapse
Absolutely stock. Today I tried reinstalling everything... nothing
lmerega said:
Not the answer I was hoping
Absolutely stock. Today I tried reinstalling everything... nothing
Click to expand...
Click to collapse
This has been happening to me for over a year and to people since the note 3 came out. FIrst we tried lifting the antennae prongs, then we rebuilt NV GPS through the service menu... Still nothing.
Now I am trying to install custom roms...
I installed Darklord's note 7 custom rom on my note 3 and the gps is working... but it has happened before that it works for a few days or a week and then dies again.
Riqz said:
This has been happening to me for over a year and to people since the note 3 came out. FIrst we tried lifting the antennae prongs, then we rebuilt NV GPS through the service menu... Still nothing.
Click to expand...
Click to collapse
Same things tried by me... I am afraid this beer will remain to me
lmerega said:
Hi all, I tried everything I found on the Internet.
I thought it was a cable problem, a contact problem.
I opened and closed my Note 3 several times with no luck.
This is what happens: my GPS cannot fix any satellite.
I made a video to show what happens.
Note that it was trying to fix since about 30 minutes.
Whoever is able to help me solving this problem has a free beer as a reward
Click to expand...
Click to collapse
bro, check this thread for the solution
http://forum.xda-developers.com/showthread.php?t=2729322
arinsms said:
bro, check this thread for the solution
http://forum.xda-developers.com/showthread.php?t=2729322
Click to expand...
Click to collapse
This was one of my forst lookings... does not work
Tried everything then nothing much left .
As GPS is a function of kernel have you swapped kernels .
Did you use GPS Fix to wipe and redownload AGPS data .
What model is it .
JJEgan said:
Tried everything then nothing much left .
As GPS is a function of kernel have you swapped kernels .
Did you use GPS Fix to wipe and redownload AGPS data .
What model is it .
Click to expand...
Click to collapse
No, I have the very same kernel (stock rom).
I wipe and redownloded AGPS data several times with no luck
lmerega said:
No, I have the very same kernel (stock rom).
I wipe and redownloded AGPS data several times with no luck
Click to expand...
Click to collapse
Buddy you know what... I just installed Purify custom rom. It's a very slightly modified version of Cyanogen MOd... and for now... I've never had my gps fix so fast. It's also a VERY fast and battery saving mod.
Try it! PM me if you need help with it.
Riqz said:
Buddy you know what... I just installed Purify custom rom. It's a very slightly modified version of Cyanogen MOd... and for now... I've never had my gps fix so fast. It's also a VERY fast and battery saving mod.
Try it! PM me if you need help with it.
Click to expand...
Click to collapse
Thx, but it is my wife's phone.
I prefer not having GPS, but using a stable and tested rom.
In caso I decide to mod, I'll consider this ROM.
Thx for the help
I found a thread on Reddit that fixed my GPS once, then a thread here that fixed it better the 2nd time. It has to do with pulling the back off and bending the tabs that connect to the GPS antenna on the rear. These threads tell and show all. Follow these and GPS issues should be resolved.
https://www.reddit.com/r/GalaxyNote3/comments/2xcvpi/fyi_easy_fix_for_note_3_gps_problem/
http://forum.xda-developers.com/showthread.php?t=2729322
I am having the same issues on my Samsung Note 3 sm-n9005. Accelerometer, proximity sensor, barometer, light sensor, gyroscope sensor and magnetic sensor. All dead now.
I am on Android 6 MM. Using custom ROM DarkWolf. Before flashing custom ROM (stock 5.0) no issues (only issues I having was always constantly "Searching for GPS..." on each time reboot). I also try reflash the ROM and tried another custom ROM Phronesis ROM, no luck. I haven't try flash CM yet. Some mention because of Android version upgrade like lollipop to marshmallow will cause this issues. Currently I unsure is software or hardware cause it. Also, it might cause by motherboard. I really have no idea.
Relate to motherboard issue topic: https://plus.google.com/116564723372338080380/posts/NpMvDbXYGHN
Related topic: https://plus.google.com/109361908530625262611/posts/Boeke5e9GMn
What about modem firmware, does it cause on those issues? If reflash the modem will it be solve?
lmerega said:
No, I have the very same kernel (stock rom).
I wipe and redownloded AGPS data several times with no luck
Click to expand...
Click to collapse
Nightpath said:
I found a thread on Reddit that fixed my GPS once, then a thread here that fixed it better the 2nd time. It has to do with pulling the back off and bending the tabs that connect to the GPS antenna on the rear. These threads tell and show all. Follow these and GPS issues should be resolved.
https://www.reddit.com/r/GalaxyNote3/comments/2xcvpi/fyi_easy_fix_for_note_3_gps_problem/
http://forum.xda-developers.com/showthread.php?t=2729322
Click to expand...
Click to collapse
We've all tried this it doesn't work
claudchan said:
I am having the same issues on my Samsung Note 3 sm-n9005. Accelerometer, proximity sensor, barometer, light sensor, gyroscope sensor and magnetic sensor? all dead now.?
I am on Android 6 MM. Using custom ROM DarkWolf. Before flashing custom ROM (stock 5.0) no issues (only issues I having was always constantly "Searching for GPS..." on each time reboot). I also try reflash the ROM and tried another custom ROM Phronesis ROM, no luck. I haven't try flash CM yet. Some mention because of Android version upgrade like lollipop to marshmallow will cause this issues. Currently I unsure is software or hardware cause it. Also, it might cause by motherboard. I really have no idea.
Relate to motherboard issue topic: https://plus.google.com/116564723372338080380/posts/NpMvDbXYGHN
Related topic: https://plus.google.com/109361908530625262611/posts/Boeke5e9GMn
What about modem firmware, does it cause on those issues? If reflash the modem will it be solve?
Click to expand...
Click to collapse
Try installing Purify custom rom. It solved all my issues at least for the past week. I think the gps is controlled by the kernel not the modem. I'm using purify rom with purify 1.1 kernel. You can find the rom + kernel and instructions on this post: http://forum.xda-developers.com/gal...ify-cm-13-hlte-n9005-unofficial-cm13-t3337234
A new GPS fix posted in Android Development .
Sent from my SM-N920C using XDA-Developers mobile app
note3 for indoor with apgs. In the beginning, I think it's GPS issue leading me can't play Pokemon. But indoor, we can only have agps, so I try to look at the setting and see if this works for you
1. Use faster GPS to change the NTP server by select continent and region you are in.
2. In faster GPS, go to advance to change setting. Change value of intermediate_post to 0. This one is important and I find it helps to lock my location by agps in a second. otherwise, location is found with 4km error
3. Use GPS status app to reset and download the agps data. This make the error distance even shorter
4. Of course,restart and enjoy
I do this and I can lock my location even indoor with a second. Hope it works for you. I try this out by myself and hope this helps you
Cheers
[email protected] said:
note3 for indoor with apgs. In the beginning, I think it's GPS issue leading me can't play Pokemon. But indoor, we can only have agps, so I try to look at the setting and see if this works for you
1. Use faster GPS to change the NTP server by select continent and region you are in.
2. In faster GPS, go to advance to change setting. Change value of intermediate_post to 0. This one is important and I find it helps to lock my location by agps in a second. otherwise, location is found with 4km error
3. Use GPS status app to reset and download the agps data. This make the error distance even shorter
4. Of course,restart and enjoy
I do this and I can lock my location even indoor with a second. Hope it works for you. I try this out by myself and hope this helps you
Cheers
Click to expand...
Click to collapse
It's not an AGPS kind of Issue.
Riqz said:
Try installing Purify custom rom. It solved all my issues at least for the past week. I think the gps is controlled by the kernel not the modem. I'm using purify rom with purify 1.1 kernel. You can find the rom + kernel and instructions on this post: http://forum.xda-developers.com/gal...ify-cm-13-hlte-n9005-unofficial-cm13-t3337234
Click to expand...
Click to collapse
Nope. Doesn't work. All broken as well. I guess is hardware related.
http://forum.xda-developers.com/showpost.php?p=68392458&postcount=5787
When on data, have wifi activated even if you are not on a network. It helps.

Fingerprint not working..nothing work.

What I flash for fingerprint back to work ...?
linage till latest...
RR
Aex
Stock 15s/19s/23s/26s
28s(customised)
even modem ...
All gone wrong....
The fingerprint scanner has never worked good on this phone. I would forget about it
Sent from my Le X820 using Tapatalk
reefmonger said:
The fingerprint scanner has never worked good on this phone. I would forget about it
Sent from my Le X820 using Tapatalk
Click to expand...
Click to collapse
I cant say that. For me fingerprint works fast and good.
A friend with a S7 has got no better fingerprint detection
I would suggest to install the latest modem
I've tried everything and mine doesn't work. It worked for two days, then died, and two days later it revived for two hours, after trying the battery drain trick that seemed to work on other phones. It then died again, and hasn't worked ever since. Now I don't expect it to work, and I live happier without worrying about it. Unless someone comes up with a "magical" solution, which I highly doubt. The phone can work without it and the fingerprint scanner is not even among the main 5 reasons why I bought this phone (those being RAM size, screen size, screen resolution, storage capacity, camera quality)
Did you try to update the modem firmware?
IF not, download 23S version and flash in recovery.
https://yadi.sk/d/5v2p3F7o3GJBxn/China
Beackman said:
Did you try to update the modem firmware?
IF not, download 23S version and flash in recovery.
https://yadi.sk/d/5v2p3F7o3GJBxn/China
Click to expand...
Click to collapse
Tired but nothing worked flashed modem 26s/23s both
jman0 said:
I've tried everything and mine doesn't work. It worked for two days, then died, and two days later it revived for two hours, after trying the battery drain trick that seemed to work on other phones. It then died again, and hasn't worked ever since. Now I don't expect it to work, and I live happier without worrying about it. Unless someone comes up with a "magical" solution, which I highly doubt. The phone can work without it and the fingerprint scanner is not even among the main 5 reasons why I bought this phone (those being RAM size, screen size, screen resolution, storage capacity, camera quality)
Click to expand...
Click to collapse
I bought because of the specification.
meetgajjar31 said:
Tired but nothing worked flashed modem 26s/23s both
Click to expand...
Click to collapse
But you cleared cache and dalvik cache? if yes, the fingerprint has a hardware problem.
You can find all the firmwares here. 419D or 26s have been reported to fix the fingerprint scanner.
fingerprint authentication
In my case, fingerprint authentication now works after burning slim7.
https://forum.xda-developers.com/le-max-2/development/7-1-2-slim7-lemax-2-t3636674
[email protected] said:
In my case, fingerprint authentication now works after burning slim7.
https://forum.xda-developers.com/le-max-2/development/7-1-2-slim7-lemax-2-t3636674
Click to expand...
Click to collapse
I also tried that (and the rest of the Android 7 ROM's) and got the same result: nothing. I guess mine has a hardware problem
try calibrating the fingerprint sensor. Seems to work fine after that.
anmolkakkar said:
try calibrating the fingerprint sensor. Seems to work fine after that.
Click to expand...
Click to collapse
My fingerprint sensor died right after using calibration. The sensor accuracy seemed bad (it would unlock just 1 out of every 3 times, even after having registered the same finger twice, as recommended by many people) so I decided to try calibration. I calibrated the sensor and it died.
jman0 said:
My fingerprint sensor died right after using calibration. The sensor accuracy seemed bad (it would unlock just 1 out of every 3 times, even after having registered the same finger twice, as recommended by many people) so I decided to try calibration. I calibrated the sensor and it died.
Click to expand...
Click to collapse
That's sad. This trick has always seemed to work for me.
my fingerprint sensor started to vibrate after update just the modem firmware to 23s chinese
and i'm still on the indian stock firmware 19s
But I am still unable to complete the registration process, it vibrates 3 or 4 times and stoped
i guess i will try again after my phone cool down
sorry for my english
Mo908 said:
my fingerprint sensor started to vibrate after update just the modem firmware to 23s chinese
and i'm still on the indian stock firmware 19s
But I am still unable to complete the registration process, it vibrates 3 or 4 times and stoped
i guess i will try again after my phone cool down
sorry for my english
Click to expand...
Click to collapse
That's what happened to me when my sensor came back to life temporarily. It started vibrating but did not register the fingers, just kept telling me to try again. Next morning it registered the fingers, but the sensor died again two hours later
jman0 said:
That's what happened to me when my sensor came back to life temporarily. It started vibrating but did not register the fingers, just kept telling me to try again. Next morning it registered the fingers, but the sensor died again two hours later
Click to expand...
Click to collapse
I have succeeded to register my finger twice !
and it works fine for now
Mo908 said:
I have succeeded to register my finger twice !
and it works fine for now
Click to expand...
Click to collapse
Lucky you. I hope it lasts for you
As a last resort, I just tried flashing the latest Cuoco92 ROM via flashboot, and that didn't help, either, so I think I'm definitely giving up on this. I've been enjoying the rest of the phone features with no problems, but this fingerprint issue, although it lets you keep using the phone, is quite annoying, and proof (again) of how disastrous (if not nonexistent) Chinese QC is. Sometimes I even think about filing a dispute through Paypal and getting a refund.
My FP dead after less than one week I got Lex829 now I got the phone almost 6 months. I was running Tora33 23S stock rom for long time with the dead Fingerprint. Recently I installed (flash by TWRP) official stock Eui rom 26S and tried test Fingerprint just for fun, miracle does happen it came back alive and still working until now with stock 26S rom. FP speed kinda slow but its ok for me just glad its working again

anyone else just get a second october update?

I just got this. The first October update was 105mb and I updated yesterday. IDK what this one is about.
Me too
I too have got it. Interesting..
It appears that they fixed the fingerprint and CPU lock bug along with the Smart Lock blank screen bug and the read and write speeds issues. I guess they finally did it. Next up is Pie I hope...
Here also. After yesterday an update was delivered, I am now offered a new update. The installation is now running. I noticed after yesterday's update that there were significant "memory / processing delays", which had previously not occurred on my device. The update is 203 mb, yesterday only 103.5mb were delivered.
Updated again with the 203mb . No the smart lock empty screen is not fixed. ?
¿? any change
hrizuwan said:
Updated again with the 203mb . No the smart lock empty screen is not fixed.
Click to expand...
Click to collapse
Go to Settings, Security and Location and under Trust Agents disable Smart Lock, reboot the phone, go to Trust Agents again and enable Smart Lock and then try.
Version OPM1.171019.011.V9.6.15.0.ODIMIFE
Toke some time to install. It didn't disable CAMERA2API (installed before 9.6.14). I hope my battery gets better. Since last update battery was being drained really fast.
Which "base" version of GPlay Services do you have with october's patch? (For example, i can install an older version in august patch, like 12.6.89) is this possible in the latest update?
Catsonvi said:
It appears that they fixed the fingerprint and CPU lock bug along with the Smart Lock blank screen bug and the read and write speeds issues. I guess they finally did it. Next up is Pie I hope...
Click to expand...
Click to collapse
Ui still locks up when writing big files
kadu20es said:
Version OPM1.171019.011.V9.6.15.0.ODIMIFE
Toke some time to install. It didn't disable CAMERA2API (installed before 9.6.14). I hope my battery gets better. Since last update battery was being drained really fast.
Click to expand...
Click to collapse
Buddy is camera 2 api still not enabled by default by xiaomi yet?
IjazCI said:
No. No camera2api by default. Hope Xiaomi enable it when they release pie. They are embarrassed to enable it as Gcam mods , put Mi camera application to shame.
Click to expand...
Click to collapse
Yeah lol
Also i find sometimes photos are not that good inside my house but photos of daylight are nice
Is proximity sensor issue fixed?
Varun.Shanbhag said:
Is proximity sensor issue fixed?
Click to expand...
Click to collapse
Xiaomi can't move it so it will never be "fixed". You need to hold your phone differently.
IjazCI said:
Agree. With proper daylight it perform well . But Google's post processing is extraordinary.
Click to expand...
Click to collapse
Finally someone agreeing on bad camera quality in low light
And google should allow google camera for android one devices we are install here port of it
Benjamin_L said:
Xiaomi can't move it so it will never be "fixed". You need to hold your phone differently.
Click to expand...
Click to collapse
Put your finger on the sensor and It will still fail, its software related
ramir0 said:
Put your finger on the sensor and It will still fail, its software related
Click to expand...
Click to collapse
Here you go, you can reset the proximity with this app.
https://play.google.com/store/apps/details?id=com.mobiledirection.proximitysensorreset&hl=en
But the position of proximity sensor is really bad, especially for the left arm holding phone users, like my self...so, that will never be fixed of course.
@Benjamin_L What @ramir0 is saying is right. This is a bug which existed even before the phone went on sale and still not fixed.
Ok, so this update seems to be the real one with some bugs fixed, the first one (100Mb) was just security update, this one should have some fixes, but without changelog, who knows what...
EDIT:
I just did a quick Andro Bench test.
My writing speed goes up, from 174Mb to 220Mb, everything else is like before update.

Categories

Resources