Hi i have bricked my storm. I flashed cm13 and it got update. i tied to install it but now phone only works in fastboot mode. how can i recover it?
FIXED. I downloaded stock fastboot images form cyngn.com/support and flashed them one by one and it works!
Related
Hi Guys,
I brought my LG G2 D802 32GB last week and I believe it's possibly hard bricked if not soft bricked so let me start by saying that anyone who can help me get my brand new G2 working will be receiving some beer money!
I've owned over 15 android devices over the years and i'd say i'm a competent flasher but I've never had such a problem flashing any of those devices as I have on the G2!
So here's what I did:
1) Updated Phone to 4.4.2 and rotted using IOroot method (Root was successful)
2) Install LG USB Drivers
3) Flashed CWM 6.0.4.4 (Flashed successful and CWM was working fine with Root access on ROM)
I then decided to put TWRP as the recovery because after much research it seemed to be the most popular choice.
4) Downloaded D802_AutoRec.apk (I believe this was the correct recovery for my device)??
here's what happened:
After using AutoRec to flash TWRP recovery I rebooted and the phone displayed:
450 Fastboot mode started
500 udc_started()
Plugging in the USB cable then adds the following lines:
660 -reset-
670 -portchange-
740 fastboot; processing commands
Note that Download mode WAS available at this point.
I then tried flashing CWM recovery again through fastboot which showed as successful but still stuck in fastboot after rebooting. The same happened for TWRP.
I then went to the LG website, put in my IMEI number and downloaded the stock ROM (D80220C_00). I used the G2 extractor to extract the kdz to a DZ file then extracted the aboot/boot & laf.img. Since I did this I have lost download mode!
It's interesting to note that fastboot shows attached device as:
? fastboot
and ADB shows no attached devices.
I'm not sure this is relevant as I still seem to be able to push commands to the phone through fastboot?
I then tried to flash the stock ROM (D80220C_00) using LG Flash Tool however it gets to 27% and says "cannot connect to the phone
So as it stands at the moment all I have is the option to flash using fastboot, I have no download mode, no recovery or no working ROM. Have I completely bricked my phone or is there anything else I can try to get the stock ROM back on there?
Any help is massively appreciated!
Hello!
Try this, I hope it helps!
http://forum.xda-developers.com/showthread.php?t=2477595
thank you but I have and I still can't get into download mode....fastboot only
vPro97 said:
Hello!
Try this, I hope it helps!
Click to expand...
Click to collapse
Hello guys,
I have a problem with my Redmi 2 Pro HM2014813.
It seems that i flashed the wrong ROM version and ended up without Recovery and in a Bootloop.
First I upated my TWRP recovery to 3.0.0 without any problems. Then I tried to flash the ROM "V7.1.3.0.KHJMICK (MIUI7) " Global Version from here http://en.miui.com/download-261.html .
Maybe I had to take the chinese version? Any hints here?
So now my phone shows the Mi logo when turning on but it won't go further. Recovery also isn't working. Only thing working is the Fastboot.
Anybody got a solution for me to fix my phone?
Regards
u need to flash fastboot ROM with miflash then u can solve this problem
Fastboot Rom link http://bigota.d.miui.com/V7.1.1.0.KHJMICK/wt88047_global_images_V7.1.1.0.KHJMICK_20151209.0000.6_4.4_global_a49c63ee30.tgz
and for miflash http://en.miui.com/forum.php?mod=attachment&aid=NjM5NDE0fDg0MDMxMTFkfDE0NjIwMjQyNzN8MTQzMzA4OTg3fDI3MjM3Ng%3D%3D
follow instructions on this thread http://en.miui.com/thread-126437-1-1.html
Thanks, fixed it!
I got the same issue " bootloop baby", nothing work except fastboot only. I will try to fix it. Thanks for your advice @HUNTER_SG
Thanks I have this 2014813 it was working I did update without knowing that the phone had root thus device was bricked only cwm in Chinese I tried all senior technicians in town but they turned me down I decided to try fix it my self after several trials I got to mi website and downloaded fastboot ROM which worked only for recovery now it has recovery 2.0.1 if I reboot it remains at mi logo besides the phone seems not to detect update.zip any help .
future_geek said:
follow instructions on this thread http://en.miui.com/thread-126437-1-1.html
Click to expand...
Click to collapse
Link no working
Hi Everyone,
I have an issue with my Oneplus8 pro and below are the details
1. The device was working perfectly. I was interested to root the device and install a custom ROM.
2. The method used was to try and flash a patched boot image for the device but I think i landed up using a wrong boot image file.
3. The OS was on 10.5.10 if I remember correctly. I used a patched image file I suppose of an older firmware. Now restarts and goes to "QUALCOMM Crashdump mode". The only options are
a. reboot to fastboot mode
b. flash the TWRP for Oneplus 8 pro but that doesnt mount by storage so cant really transfer anything to flash again.
Requesting some help to fix the issue and apologies if i have not explained correctly.
Tried booting a stock boot image?
neverborn said:
Tried booting a stock boot image?
Click to expand...
Click to collapse
Hey,
Thank you for a quick repsonse. Yes, i had tried doing that and still the same error however while we speak, i just downloaded the msmDownloadtool and tried using it to flash a stock firmware and finally, i am so happy to see the device boot sucessfully
Thank you once again for tryin to help
Regards
Hello.
Clarify exactly how the procedure took place
Okay, Let me explain exactly what I did here... I first flashed Twrp using SP flash tool which worked without too much problem. Then I attempted to install the latest super su zip which told me the boot.img was already patched and it could not find a ramdisk... So I moved on and flashed the latest Magisk zip which flashed no problem. Rebooted the device and it came up with a red boot state telling me it would boot in 5 sec. It did not boot at all. Turned off the tablet and rebooted into twrp again. I then flashed the OTA update system.img, boot.img, and re-flashed twrp from twrp itself instead of the SP flash tool. It booted into twrp no problem, however now it said it could not mount the system partition. I did a full data wipe, factory reset, rebooted into twrp again. Same issue. So I attempted to re-flash the firmware with SP flash tool. Did not notice i had it set to format and download and not only download. It said formatting for maybe 2 sec and gave me an error. Now the device will not turn on at all... no screen whatsoever, no recovery, etc... I have had no luck getting the asus flash tool to even recognize a com port however SP flash tool seems to be able to flash the device no problem. I extracted the .raw firmware file I have for the latest firmware, modified the scatter file to allow flashing all partitions, and I did a full firmware flash of the device using SP flash tool. However it still does not turn on... it does nothing... So I'm assuming that I accidentally formatted over the bootloader... And I cannot find a bootloader flash file for this device anywhere... So I'm stuck with an Asus ZenBrick... Does anyone know a way to fix this issue? When I plug the device into my computer and open device manager it switches between the preloader and mtk serial port very quickly not staying on either one very long. I'm assuming this is why I cant get the asus flash tool to work and SP flash tool works off just the initial preloader. I just bought this tablet from someone and managed to hard brick it in less than a days time... Any help at all with a way to revive this device will be greatly appreciated. Thank You in advance to anyone who tries to help me fix my mess up.
I believe we all know here how hard flashing Nokia 6 phones are... they are unbelievably a PITA.
I have a TA-1025 Nokia 6, 7.1.1 Nougat. I have been trying to fix it for 3 days now with no success. Originally tried to reflash stock boot image at first with little success so I could flash Magisk. Ended up wiping out entire System partition and trying to reflash, getting nowhere. I then flashed a B02_Homebrew.zip which ended up with stock recovery and no root at all (and no ability to flash magisk despite having unlocked bootloader. great.) Downgraded bootloader again and am now stuck and unsure how to proceed.
Note I CANNOT get QFil to work without EDL mode, which requires me to tear my phone apart.
Any suggestions? Does anyone have any certified knowledge of how to fix and reflash stock Nokia 6? I don't want to take it to a dealer because they will update it and make it unrootable (and probably won't be able to even touch it since bootloader is unlocked.)
ATM, all I can boot to is TWRP recovery or Download Mode.
Help?
Dantheman221 said:
I believe we all know here how hard flashing Nokia 6 phones are... they are unbelievably a PITA.
I have a TA-1025 Nokia 6, 7.1.1 Nougat. I have been trying to fix it for 3 days now with no success. Originally tried to reflash stock boot image at first with little success so I could flash Magisk. Ended up wiping out entire System partition and trying to reflash, getting nowhere. I then flashed a B02_Homebrew.zip which ended up with stock recovery and no root at all (and no ability to flash magisk despite having unlocked bootloader. great.) Downgraded bootloader again and am now stuck and unsure how to proceed.
Note I CANNOT get QFil to work without EDL mode, which requires me to tear my phone apart.
Any suggestions? Does anyone have any certified knowledge of how to fix and reflash stock Nokia 6? I don't want to take it to a dealer because they will update it and make it unrootable (and probably won't be able to even touch it since bootloader is unlocked.)
ATM, all I can boot to is TWRP recovery or Download Mode.
Help?
Click to expand...
Click to collapse
just download the Full OTA update in the thread section.
must downgrade first ur recovery to nougat then install update via recovery.
You can use TA-1021.
If you want Nougat Ver. then use Nokia OST.
Dantheman221 said:
I believe we all know here how hard flashing Nokia 6 phones are... they are unbelievably a PITA.
I have a TA-1025 Nokia 6, 7.1.1 Nougat. I have been trying to fix it for 3 days now with no success. Originally tried to reflash stock boot image at first with little success so I could flash Magisk. Ended up wiping out entire System partition and trying to reflash, getting nowhere. I then flashed a B02_Homebrew.zip which ended up with stock recovery and no root at all (and no ability to flash magisk despite having unlocked bootloader. great.) Downgraded bootloader again and am now stuck and unsure how to proceed.
Note I CANNOT get QFil to work without EDL mode, which requires me to tear my phone apart.
Any suggestions? Does anyone have any certified knowledge of how to fix and reflash stock Nokia 6? I don't want to take it to a dealer because they will update it and make it unrootable (and probably won't be able to even touch it since bootloader is unlocked.)
ATM, all I can boot to is TWRP recovery or Download Mode.
Help?
Click to expand...
Click to collapse
my Nokia 6 phone is also bricked. Please share if you find a solution.
Dantheman221 said:
I believe we all know here how hard flashing Nokia 6 phones are... they are unbelievably a PITA.
I have a TA-1025 Nokia 6, 7.1.1 Nougat. I have been trying to fix it for 3 days now with no success. Originally tried to reflash stock boot image at first with little success so I could flash Magisk. Ended up wiping out entire System partition and trying to reflash, getting nowhere. I then flashed a B02_Homebrew.zip which ended up with stock recovery and no root at all (and no ability to flash magisk despite having unlocked bootloader. great.) Downgraded bootloader again and am now stuck and unsure how to proceed.
Note I CANNOT get QFil to work without EDL mode, which requires me to tear my phone apart.
Any suggestions? Does anyone have any certified knowledge of how to fix and reflash stock Nokia 6? I don't want to take it to a dealer because they will update it and make it unrootable (and probably won't be able to even touch it since bootloader is unlocked.)
ATM, all I can boot to is TWRP recovery or Download Mode.
Help?
Click to expand...
Click to collapse
First flash stock recovery, then boot into stock recovery and flash latest OTA
Link for latest OTA got from Telegram (TA-1025 ) : https://android.googleapis.com/packages/ota-api/package/5d91fc596557fecf1ba49b9321b446c64e3acd06.zip
Note :Your bootloader will be remained unlocked. don't worry
Sharashchandra said:
First flash stock recovery, then boot into stock recovery and flash latest OTA
Link for latest OTA got from Telegram (TA-1025 ) : https://android.googleapis.com/packages/ota-api/package/5d91fc596557fecf1ba49b9321b446c64e3acd06.zip
Note :Your bootloader will be remained unlocked. don't worry
Click to expand...
Click to collapse
I'm stuck in EDL mode now, any fixes or tips on how to flash/patch? QFIL is saying 'Failed to switch to EDL Mode'
Dantheman221 said:
I'm stuck in EDL mode now, any fixes or tips on how to flash/patch? QFIL is saying 'Failed to switch to EDL Mode'
Click to expand...
Click to collapse
Is phone is totally dead?? what you are getting when you insert charger? how pc is detecting your device (go to device manager)?
Sharashchandra said:
Is phone is totally dead?? what you are getting when you insert charger? how pc is detecting your device (go to device manager)?
Click to expand...
Click to collapse
It shows up as a QualComm COMM port device. But before you get your hopes up, every time I have tried to flash it, it says "Failed to switch to EDL mode" :-/.