Database Users

Camera APK

Can someone upload the stock Camera APK for me?
Backup with titanium backup or extracted with ADB.
Someway to install ?

Which phone?
tapatalked..

Sorry, Huawei P8.
I posted this in Huawei P8 section, but it seems it gets posted here and linked there.

IkeaKast said:
Can someone upload the stock Camera APK for me?
Backup with titanium backup or extracted with ADB.
Someway to install ?
Click to expand...
Click to collapse
I have uploaded the whole folder for you.
Just unzip it an you have the libs too.
System folder is /system/priv-app/
Ohhh...this is for Huawei P8 GRA-L09 with this firmware / Build-No.: GRA-L09C900B170

Dingoman10 said:
I have uploaded the whole folder for you.
Just unzip it an you have the libs too.
System folder is /system/priv-app/
Ohhh...this is for Huawei P8 GRA-L09 with this firmware / Build-No.: GRA-L09C900B170
Click to expand...
Click to collapse
I pasted the folder, set the correct permissions and owner, but it isnt installed when i restart, and when i try to install it, it fails :/

IkeaKast said:
I pasted the folder, set the correct permissions and owner, but it isnt installed when i restart, and when i try to install it, it fails :/
Click to expand...
Click to collapse
You set the "owner"? Normally you have nothing to change in there....

Dingoman10 said:
You set the "owner"? Normally you have nothing to change in there....
Click to expand...
Click to collapse
Owner and Group were correct already, I guess ill need to wait for a new firmware to install it (it installs the default apk's again when it is updated)

Android 7.0 on P9 lite

I found a site with a tutorial on how to install Android 7.0 on P9 lite.On version VNS-L31C636B361 there are 3 files, and acording to them, you need to follow these steps:
Extract the contents of the zip files you downloaded from above.
Create a folder named “dload” in the root directory of your device’s SDcard.
Copy all the extracted contents of the zips into the dload folder.
Open the dialer app and dial *#*# 2846579#*# *
Select Project Menu > Software upgrade > SDcard upgrade > confirm the installation.
The firmware will begin installing and once that is done your device will reboot automatically.
But the problem is, if I extract all the contents from all 3 files, some of them have the same name and overwrite, and when I try to install by *#*# 2846579#*# *, it stops after 5% and gives me fail error.
What is the correct way to install and why are there 3 separate files ? (also, do I need to have some settings ? the phone should be connected to PC while installing ? )
Thank you very much!

What model you have?
Seems you have another oeminfo...

i have the same problem, it runs now on version vns-l31c432b161, if a want to install android 7 i get the same message as above

gtdaniel said:
What model you have?
Seems you have another oeminfo...
Click to expand...
Click to collapse
the omeinfo is 100% the same, otherwise if would have said its not compatible.The problem is there are 3 different files for this model to download, and if u extract them in the same folder, they overwrite ? What is the correct way to install them ?

erader said:
the omeinfo is 100% the same, otherwise if would have said its not compatible.The problem is there are 3 different files for this model to download, and if u extract them in the same folder, they overwrite ? What is the correct way to install them ?
Click to expand...
Click to collapse
EDIT: i tried again and it stucks on 5%, doesnt say anything.

Good to know!
If you are in MM 6.0 you can not go to Nougat 7.0 without some preparation until Huawei release official version.
I you are already in Nougat 7.0 (B3xx) you can go to B360-B361, directly with Sdcard upgrade or with three keys pressed method.

U dint answer my question though.Let me be more clear.
Here is a tutorial on how to install Android 7.0 on P9 Lite: http://www.droidviews.com/update-huawei-p9-lite-manually-official-android-7-0-nougat-emui-5-0/
On my model, there are 3 files:
4. VNS-L31C636B361
update.zip
update_data_full_VNS-L31_B360_hw_meafnaf.zip
update_data_full_VNS-L31_B361_hw_meafnaf.zip
and they say
Extract the contents of the zip files you downloaded from above.
Create a folder named “dload” in the root directory of your device’s SDcard.
Copy all the extracted contents of the zips into the dload folder.
But some of the files from these 3 .zips have the same name, and when I copy them in the same folder, they overwrite.
Is that tutorial sh1t ?

Need Ale l21 Dump file

After hardrick my phone, i need the dump file of ale-l21 or chc-u01 to try to unbrick it.

Need Someone to creat a debrick img [JUST FLASH THIS FILE IN WORKING DEVICE]

I have a hard brick huawei p8 lite, need someone who have a fonctionnal P8 lite to create a debrick.img the method is simple :
1) download the file from the link Debrick.zip
2) flash it via TWRP.
3) You will find a file called debrick.img in you sd card.
4) Upload this to your preferred file host.
this will help many people, Sorry for my bad English.
[Original thread]

Mehdi008 said:
I have a hard brick huawei p8 lite, need someone who have a fonctionnal P8 lite to create a debrick.img the method is simple :
1) download the file from the link Debrick.zip
2) flash it via TWRP.
3) You will find a file called debrick.img in you sd card.
4) Upload this to your preferred file host.
this will help many people, Sorry for my bad English.
[Original thread]
Click to expand...
Click to collapse
That is for Samsung Qualcomm devices, not apply to P8 Lite.
How kind of brick you have? What have you done?
.

I have flashed rom from honor 4c with TWRP, and my phone not showing anything just black screen ( no fastboot, no recovery) just blinking the led with green and red color, i need someone to create the dump file unbrick.img to try to boot from sd card.

Extract p10 lite system.img

Hi, anyone can say me how to extract files from system.img(extracted from update.app).
If I try with ext4extractor it crash. Thanks for the help.