For rooted users with TWRP recovery-
- Boot into TWRP recovery
- Flash the complete signed flashable zip of your current oxygen OS
- Flash new OTA incremental update zip
- If you need root access then Flash the SuperSU zip
Done!
Downloads- http://goo.gl/mcXx1i
Here is a detailed video guide -
Thanks for the video
Related
Hi there!
It`s always been hard to find specific stuff for our SGP551 variant, so i uploaded my prerooted flashable zip for anyone who wants to move to Lollipop without losing root and recovery.
It's the STOCK 23.4.A.0.546 firmware with SuperSU v2.46 and [NUT]`s Dual Recovery 2.8.21.
Let`s get to it.
1- You have to be rooted and with working recovery.
2- Copy the flashable zip to your internal memory or microsd card and reboot to recovery. (i used TWRP recovery with the file on internal memory)
3- Do a factory reset and install the zip file.
4- Reboot system and you're done.
The first boot took about 10 minutes...
Download link: https://drive.google.com/file/d/0B1MPoZxpwB4kdkd5ZWtYVDZFY28/view?pli=1
Thanks and credits to @Androxyde, @[NUT], @Chainfire, @IaguCool, and @zxz0O0.
Hello,
i am using oxygen os 3.1 with TWRP recovery. No root no modifications other than TWRP.
Is it possible to update without factory reset to the latest oxygen os without losing my custom recovery TWRP?
I read about signed flash able zips - but i am not sure on how to proceed.
Guidance is appreciated !
Thank You
Device is Oneplus two 64gb.
german_oneplus_two said:
Hello,
i am using oxygen os 3.1 with TWRP recovery. No root no modifications other than TWRP.
Is it possible to update without factory reset to the latest oxygen os without losing my custom recovery TWRP?
I read about signed flash able zips - but i am not sure on how to proceed.
Guidance is appreciated !
Thank You
Device is Oneplus two 64gb.
Click to expand...
Click to collapse
You want to upgrade to latest 3.5.5 ? You'll have to wait until signed flashable zip for 3.5.5 is made. For now 3.1.0 is the latest flashable zip.
Check this thread -> http://forum.xda-developers.com/oneplus-2/general/rom-mirrors-official-oxygen-os-roms-ota-t3209863
Thank you,
so i will wait for the full signed flashable zip.
still - my questions remain - i do not completely understand this :
Note: Since OTA incremental update zips will fail on rooted devices or devices with modifications to system files, it's not possible to use these to update without reverting back to completely stock, unrooted first.
To update you must either wait for the new, full, signed flashable zip to appear (usually a few weeks after the OTA update) or use the following workaround:
Boot into TWRP recovery
Flash the latest full signed flashable zip
Flash the new OTA incremental update zip
Flash the SuperSU zip
Reboot
Is it possible with the full signed flashable zip to keep twrp and my settings ?
Thank You
german_oneplus_two said:
Thank you,
so i will wait for the full signed flashable zip.
still - my questions remain - i do not completely understand this :
Note: Since OTA incremental update zips will fail on rooted devices or devices with modifications to system files, it's not possible to use these to update without reverting back to completely stock, unrooted first.
To update you must either wait for the new, full, signed flashable zip to appear (usually a few weeks after the OTA update) or use the following workaround:
Boot into TWRP recovery
Flash the latest full signed flashable zip
Flash the new OTA incremental update zip
Flash the SuperSU zip
Reboot
Is it possible with the full signed flashable zip to keep twrp and my settings ?
Thank You
Click to expand...
Click to collapse
As it says you can't use incremental update zips if you're rooted or has a modified system. You can either Flash the latest full signed flashable zip & then Flash the new OTA incremental update zip (without rooting) OR just wait for the Full signed flashable zip & then flash it(whether you're rooted or not). As for now neither "Incremental" nor "full" signed zip exists for 3.5.5.
And Yes. You won't lose TWRP.
To understand more about "Incremental" & "Full" update packages, read this -> https://source.android.com/devices/tech/ota/tools.html
you can flash full rom zip and without restarting flash twrp image in twrp itself, its kinda tricky but it works
3.5.5 Full Signed Flashable Zip's now available. Check the thread I sent before.
german_oneplus_two said:
Hello,
i am using oxygen os 3.1 with TWRP recovery. No root no modifications other than TWRP.
Is it possible to update without factory reset to the latest oxygen os without losing my custom recovery TWRP?
I read about signed flash able zips - but i am not sure on how to proceed.
Guidance is appreciated !
Thank You
Device is Oneplus two 64gb.
Click to expand...
Click to collapse
I was on 3.1.0 with Hybrid recovery and root before the OTA for 3.5.5 came through. It installed itself via the ota (1.2gb) and when it was done I was back on default recovery and no root...which i fixed in few minutes..So I am now on the latest OS 3.5.5 with Hybrid Recovery and Root..everything is perfect! No network drops so far e.t.c
Edit: I didn't have to unroot for the OTA to work..It just did. Also didn't lost any data. all apps +data still intact
Thank You B!Gguy.
Signed flashable worked flawless
Here are some steps to upgrade your rooted oneplus 3t to OOS 4.0.1 without losing data or getting any problems with dm-verity. Also follow these steps if you already have problems with dm-verity (for instance if you can't boot because you get an error)
You need twrp as your recovery in order to follow these steps. (you can use toolbox from @ahmedradaideh to flash twrp)
First download the files below and put them on your oneplus 3t
1. shut down your phone and boot into twrp (by pressing volume up and power button at the same time and then selecting recovery.)
Create a backup before flashing anything
2. flash newest ota zip file(don't wipe anything).
Skip step 3 and 5 if you don't want root.
3. flash supersu file then wipe dalvik cache.
4. reboot
5. download supersu from playstore
If you still can't boot because of dm-verity problem try flashing stock recovery.
dowloads
ota zip file: OTA zip file
Supersu file: SuperSU
Moderator Information,
Thread has been closed, there is already an update thread here: [How To] Install OxygenOS 4.0.1 with Stock Or Custom Recovery without Data Loss!!. Please post any mirrors there and the OP can add it to his main post and give you credit for the upload.
please describe a full guide step by step for flashing official twrp, cf autoroot, xposed, magisk for mia1 and if possible give brief video description guides for all...
[email protected] said:
please describe a full guide step by step for flashing official twrp, cf autoroot, xposed, magisk for mia1 and if possible give brief video description guides for all...
Click to expand...
Click to collapse
1.Enter into fastboot mode.
2.fastboot boot twrp.img
3.In twrp recovery flash twrp-installer.zip file
4.Then reboot to recovery to install twrp permanently.
5 Download cf autoroot file from firmware.mobi according to your build number and flash zip file through twrp recovery to root your mobile.
6.Install xosed installer app and through that install xposed framework.
7.Enjoy your rooted mi a1.
nilkanth.marshiwane said:
1.Enter into fastboot mode.
2.fastboot boot twrp.img
3.In twrp recovery flash twrp-installer.zip file
4.Then reboot to recovery to install twrp permanently.
5 Download cf autoroot file from firmware.mobi according to your build number and flash zip file through twrp recovery to root your mobile.
6.Install xosed installer app and through that install xposed framework.
7.Enjoy your rooted mi a1.
Click to expand...
Click to collapse
Where to get twrp installer.. on official twrp site there is only .IMG file for 3.1.1-0 available
The procedure you have explained is for twrp by Mohan 3.1.1-1 which doesn't seem to work fine for me
[email protected] said:
Where to get twrp installer.. on official twrp site there is only .IMG file for 3.1.1-0 available
The procedure you have explained is for twrp by Mohan 3.1.1-1 which doesn't seem to work fine for me
Click to expand...
Click to collapse
twrp 3.1.1-1 (by mohan) working perfect. Use twrp installer from this thread. First ensure that boot image is unmodified . Flash stock boot for your build number and then install twrp as stated above. Unmodified boot image must to install twrp. Then root with magisk to retain ota.
nilkanth.marshiwane said:
twrp 3.1.1-1 (by mohan) working perfect. Use twrp installer from this thread. First ensure that boot image is unmodified . Flash stock boot for your build number and then install twrp as stated above. Unmodified boot image must to install twrp. Then root with magisk to retain ota.
Click to expand...
Click to collapse
I did root sucessfully by this method few days back but 3.1.1-1 is not able to flash some files and magisk is not updating in this...
Importantly when officially available twrp is there why to use modes...
If u have procedure to flash the twrp.img from twrp website please show me the procedure...
[email protected] said:
I did root sucessfully by this method few days back but 3.1.1-1 is not able to flash some files and magisk is not updating in this...
Importantly when officially available twrp is there why to use modes...
If u have procedure to flash the twrp.img from twrp website please show me the procedure...
Click to expand...
Click to collapse
https://twrp.me/xiaomi/xiaomimia1.html i want to flash but every time says failed while giving command
fastboot flash recovery recovery.img
pasted the img file in same folder
downloaded again to rule out corrupted file
Here is the procedure to root samsung galaxy j7 (2016) or j710fn oreo update 8.1.0:
step1: download latest twrp
step2: flash the latest twrp using odin( please note that before flashing ensure to uncheck the autoreboot options from the option tab, if you dont do that the custom recovery will overwrite to stock recovery after booting into the ROM and you wont find any custom recovery there.)
step3: after flashing download the latest magisk zip or you can do that by using magisk manager also.
step4: place the latest magisk zip in the sd card or ext. sd card( your choice) and then download the latest magsik-defex zip(link down below) and copy it into the sd card.
step5: shut down and now boot into the recovery by pressing vol-up+home+power
step6: now flash the latest magisk, after that flash magisk-defex zip immediately withouth booting into the ROM.
step7: now boot into the ROM download the magisk manager you should find the magisk latest version installed on the device.
thank you
please note im a new member so i have been prevented to post any outside links in the posts so sorry for the inconvenience you could find the the link of magisk-defex zip here( go to the custom droid site and search disable-defex-security-samsung-galaxy-oreo-root)
link plz
somesh1 said:
Here is the procedure to root samsung galaxy j7 (2016) or j710fn oreo update 8.1.0:
step1: download latest twrp
step2: flash the latest twrp using odin( please note that before flashing ensure to uncheck the autoreboot options from the option tab, if you dont do that the custom recovery will overwrite to stock recovery after booting into the ROM and you wont find any custom recovery there.)
step3: after flashing download the latest magisk zip or you can do that by using magisk manager also.
step4: place the latest magisk zip in the sd card or ext. sd card( your choice) and then download the latest magsik-defex zip(link down below) and copy it into the sd card.
step5: shut down and now boot into the recovery by pressing vol-up+home+power
step6: now flash the latest magisk, after that flash magisk-defex zip immediately withouth booting into the ROM.
step7: now boot into the ROM download the magisk manager you should find the magisk latest version installed on the device.
thank you
please note im a new member so i have been prevented to post any outside links in the posts so sorry for the inconvenience you could find the the link of magisk-defex zip here( go to the custom droid site and search disable-defex-security-samsung-galaxy-oreo-root)
Click to expand...
Click to collapse
bro link
jaimahakaalmobile13 said:
bro link
Click to expand...
Click to collapse
link-.-
Link Here: https://dl.twrp.me/j7xelte/
Then, Read and follow carefully to this thread , and give thanks to the post . once again Thanks!
I flashed twrp 3.2.1 for sm-j710f running android 8.1
then flashed the magisk, after that flashed magisk-defex zip immediately without booting into the ROM.
once done tried to boot the system but got a message saying “The integrity verification has failed”.
Had to flash rom again.
I also tried flashing RMM and no-verity-opt-encrypt but the same problem,
one I tried :
1.flash TWRP
2.Flash Magisk
3.RMM
4.no-verity-opt-encrypt
then phone booted up but it was not rooted!
Any suggestions?
tank you
success flash but not root
please help me im try root to this tutorial step by step and done but why my j7 no root
1. flash twrp lastest
2.flash magisk and magisk-defex
3.reboot to rom
4.instal lastest magisk manager
but why not work
im check with root checker but my j7 No root please reply thks
somesh1 said:
Here is the procedure to root samsung galaxy j7 (2016) or j710fn oreo update 8.1.0:
step1: download latest twrp
step2: flash the latest twrp using odin( please note that before flashing ensure to uncheck the autoreboot options from the option tab, if you dont do that the custom recovery will overwrite to stock recovery after booting into the ROM and you wont find any custom recovery there.)
step3: after flashing download the latest magisk zip or you can do that by using magisk manager also.
step4: place the latest magisk zip in the sd card or ext. sd card( your choice) and then download the latest magsik-defex zip(link down below) and copy it into the sd card.
step5: shut down and now boot into the recovery by pressing vol-up+home+power
step6: now flash the latest magisk, after that flash magisk-defex zip immediately withouth booting into the ROM.
step7: now boot into the ROM download the magisk manager you should find the magisk latest version installed on the device.
thank you
please note im a new member so i have been prevented to post any outside links in the posts so sorry for the inconvenience you could find the the link of magisk-defex zip here( go to the custom droid site and search disable-defex-security-samsung-galaxy-oreo-root)
Click to expand...
Click to collapse
Thank you for your sharing. I had to flash no-verity-opt-encrypt after flashing Magisk. In TWRP I chose ReadOnly then wiped Cache and Data then flashed the Magisk and right after flashing it without rebooting, I flashed no-verity-opt-encrypt.
HERE is a link to download the Magisk zip and the NoVerityOptEncrypt
**Please note, the files I have uploaded are the latest BUT updates will be released and my files will be old one day!!**
---------- Post added at 02:51 AM ---------- Previous post was at 02:49 AM ----------
DidikSaputra said:
please help me im try root to this tutorial step by step and done but why my j7 no root
1. flash twrp lastest
2.flash magisk and magisk-defex
3.reboot to rom
4.instal lastest magisk manager
but why not work
im check with root checker but my j7 No root please reply thks
Click to expand...
Click to collapse
did you go to the Magisk Manager / Superuser and grant permission for rootchecker?
somesh1 said:
Here is the procedure to root samsung galaxy j7 (2016) or j710fn oreo update 8.1.0:
step1: download latest twrp
step2: flash the latest twrp using odin( please note that before flashing ensure to uncheck the autoreboot options from the option tab, if you dont do that the custom recovery will overwrite to stock recovery after booting into the ROM and you wont find any custom recovery there.)
step3: after flashing download the latest magisk zip or you can do that by using magisk manager also.
step4: place the latest magisk zip in the sd card or ext. sd card( your choice) and then download the latest magsik-defex zip(link down below) and copy it into the sd card.
step5: shut down and now boot into the recovery by pressing vol-up+home+power
step6: now flash the latest magisk, after that flash magisk-defex zip immediately withouth booting into the ROM.
step7: now boot into the ROM download the magisk manager you should find the magisk latest version installed on the device.
thank you
please note im a new member so i have been prevented to post any outside links in the posts so sorry for the inconvenience you could find the the link of magisk-defex zip here( go to the custom droid site and search disable-defex-security-samsung-galaxy-oreo-root)
Click to expand...
Click to collapse
how do you unlock the bootloader
''Thank you for your sharing. I had to flash no-verity-opt-encrypt after flashing Magisk. In TWRP I chose ReadOnly then wiped Cache and Data then flashed the Magisk and right after flashing it without rebooting, I flashed no-verity-opt-encrypt.''
Hi, I am trying to follow exactly the instructions with the latest builds of TWPR and Magisk but after boot to Rom I always receive this nasty message ''Verification failed'' and I have to install again the 8.1 firmware and start from the beginning to no avail. https://cdn-cf-3.xda-developers.com/images/smilies/frown.gif
- SM- J710FN
- firmware: 710FXXU6CSG2_J710FOJV6CSG1_J710FXXU6CSG3_HOME.tar.md5
- Odin3 v3.13.1
- TWRP: twrp-3.2.1-0-j7xelte.img.tar
- Magisk: Magisk-v19.3
- no-verity-opt-encrypt-6.1
I would very much appreciate your ideas...
J710FN ROOT Magisk
somesh1 said:
Here is the procedure to root samsung galaxy j7 (2016) or j710fn oreo update 8.1.0:
step1: download latest twrp
step2: flash the latest twrp using odin( please note that before flashing ensure to uncheck the autoreboot options from the option tab, if you dont do that the custom recovery will overwrite to stock recovery after booting into the ROM and you wont find any custom recovery there.)
step3: after flashing download the latest magisk zip or you can do that by using magisk manager also.
step4: place the latest magisk zip in the sd card or ext. sd card( your choice) and then download the latest magsik-defex zip(link down below) and copy it into the sd card.
step5: shut down and now boot into the recovery by pressing vol-up+home+power
step6: now flash the latest magisk, after that flash magisk-defex zip immediately withouth booting into the ROM.
step7: now boot into the ROM download the magisk manager you should find the magisk latest version installed on the device.
thank you
please note im a new member so i have been prevented to post any outside links in the posts so sorry for the inconvenience you could find the the link of magisk-defex zip here( go to the custom droid site and search disable-defex-security-samsung-galaxy-oreo-root)
Click to expand...
Click to collapse
USE RMM State By pass Instead Of Magisk-defex it worked for me . Thanx 4 the help bro
link = https://www.dropbox.com/s/97i23880x9j8lv8/RMM-State_Bypass_Mesa_v2.zip?dl=1