Okay, So I was trying to flash stock rom (4.4.2) in Odin and It failed. IT left me with the error, SW REV CHECK FAIL : [aboot]Fused 4 > Binary 1
I get this error every time I try to flash. And I tried to do an Emergency Software Recovery and it just fails after it downloads the Update. I am able to access Android Recovery and Download Mode Aswell. I think when I tried to factory reset I deleted The whole OS. I really hope I am not out a brand new phone. I already tried to flash like 3 different stock roms from different websites same error!
Phone was Not rooted.
No Custom Rom installed.
Android 5.1.1 Was installed before.
Also, I heard that some users have been able to flash the pit and fix this, How can I find my Pit File. Samsung Galaxy S5 SM-G900A
Related
Hi,
Recently my galaxy note was in repair at samsung. After I took it with everything wiped out and android 5.1.1, I rooted and installed twrp. I was able to install an aosp rom via recovery (the unofficial cm-13).
Now I cant flash anything via Odin without getting "sw rev check fail fused 2 binary 1" and every stock rom I flash via twrp give me bootloop.
ticiano_arraes said:
Hi,
Recently my galaxy note was in repair at samsung. After I took it with everything wiped out and android 5.1.1, I rooted and installed twrp. I was able to install an aosp rom via recovery (the unofficial cm-13).
Now I cant flash anything via Odin without getting "sw rev check fail fused 2 binary 1" and every stock rom I flash via twrp give me bootloop.
Click to expand...
Click to collapse
how did you solve yhis i have the same problem
ahmd gomaa said:
how did you solve yhis i have the same problem
Click to expand...
Click to collapse
It's not possible.
ticiano_arraes said:
Hi,
Recently my galaxy note was in repair at samsung. After I took it with everything wiped out and android 5.1.1, I rooted and installed twrp. I was able to install an aosp rom via recovery (the unofficial cm-13).
Now I cant flash anything via Odin without getting "sw rev check fail fused 2 binary 1" and every stock rom I flash via twrp give me bootloop.
Click to expand...
Click to collapse
Just flash it again but use different usb ports. It is the usb ports problems.
ticiano_arraes said:
Hi,
Recently my galaxy note was in repair at samsung. After I took it with everything wiped out and android 5.1.1, I rooted and installed twrp. I was able to install an aosp rom via recovery (the unofficial cm-13).
Now I cant flash anything via Odin without getting "sw rev check fail fused 2 binary 1" and every stock rom I flash via twrp give me bootloop.
Click to expand...
Click to collapse
And when it bootloops boot into stock recovery and do a factory reset. That will clear all the crap out from CM-13.
Hello. I've got a problem with my S4. I had Andoid 5.0.1 on my Galaxy S4. I bought a new phone so i installed CyanogenMOD on my S4 just to see how it works. When i noticed that battery drain is super high (it wouldnt survive one night of doing nothing) i wanted to install android 4.3 because it was my first android on this phone and from what i remember S4 worked best with this version. I downloaded firmware from sammobile and i didnt use original samsung cable. Something went wrong. It failed like 0,5 sec after i clicked start. I couldnt start my phone (it said that firmware upgrade encountered an issue). and from this moment i cant install any firmware. Im using original cable now. I downloaded like 10 firmwares already from 4.2.2 to 4.3, 4.4 and 5.0.1. different countries (including my original Germany Vodafone). I managed to install it once but it got stuck after Galaxy S4 text ("Samsung" showed up and it kept blinking and blinking.). From this time it always got stuck on system.img.ext4 but not always on 50% for example. Sometimes 10%, 25%, 90%. Used versions of Odin: 3.07, 3.08, Odin3_v3.11.1
Okay. So:
1. Got S4 with Android 5.0.1
2. Installed CyanogenMOD (13 i think)
3. Tried to install 4.3 with not original cable and failed.
4. Tried to install 5.0.1 with original cable. Installed it but it got stuck on Samsung logo.
5. Tried to install various versions of android. It always got stuck on system.img.ext4 in System section of flashing with Odin.
Is there any way to fix that? I know that may be very chaotic but i hope you understand. Thank you.
After flashing 5.01 with Odin, did you perform a factory wipe before booting 5.01 for the first time?
No, my Odin was set to reboot my phone automatically
Anybody?
Hi,
Just trying to add some things:
1) Untick Auto Reboot before flashing.
2) After stock firmware successfully flashed, reboot manually to recovery mode by Home+Power+Vol(+) buttons.
3) Wipe data/factory reset.
You're ready to go.
EDIT: My bad. Got no idea about stucking on system.img.ext4.
Sent from my ASUS_Z00A using XDA Labs
You tried using kies and smart switch to perform an emergency recovery?
When flashing system, it fails or it just stops there and never proceeds?
You confirmed that the model number in download mode matches rom you are flashing?
You tried flashing with a pit file?
Can you flash twrp and another custom rom?
Kies doesn't see my phone after just plugging it in and after clicking emergency recovery. Doesn't matter if its in Download mode or just turned on with "Firmware upgrade encountered an issue..." error. Smart Switch too. Smart Switch gives me an error that my device isn't compatible with this software.
When flashing system it just stops and never proceeds.
In download mode i see this:
ODIN MODE
PRODUCT NAME: GT-I9505
CURRENT BINARY: Samsung Official
SYSTEM STATUS: Official
KNOX KERNEL LOCK: 0x0
KNOX WARRANTY VOID: 0x1
CSB-CONFIG-LSB: 0x30
WRITE PROTECTION: Enable
eMMC BURST MODE enabled
And yes, im installing rom for my model.
I will try flashing with pit file and try to flash twrp and another custom rom and let you know. I won't be able to do this today.
I tried to flash rom the normal way (Spanish version, i chose it randomly) and it flashed my device. I was stuck in Samsung logo once again (after wiping cache and all data) but after like 2-3 restarts the system started. I don't know what was causing the problems and why Spanish version worked but Germany didn't. Thank you for all your help.
Hey Guys,
I have a Samsung Galaxy Grand Prime SM-G530H, the updater asked me to update the Android into Lollipop from its original firmware Kitkat 4.4.4. After finished installing, it started bootloop, it wouldn't boot to the Android. I tried to search from many sources, to fix my phone, and I found some thread that I must to reflash the firmware because they said it's corrupted. After that, I downloaded Odin, the firmware (Android Lollipop) and flash it. It still can't boot to the Android. I tried to flash to Kitkat and it seems that the Odin was failed to flash the firmware. I can't find the CSC and PDA code from the phone because I can't boot into Android. I also tried Kies and SmartSwitch to initialize my phone, but it didn't work.
What should I do now???
I am new to flashing and custom roms but i have had lineage OS installed for awhile on my old galaxy note 3 SM-N900W8. When i went to OTA update lineage it caused my note 3 to go into a recovery Bootloop. I could not actually boot into recovery or boot system it kept restarting. So i read some forums and watched some videos. It kept saying seandoid not enforcing. I went and got a original note 3 md5 file and put it into odin put my old phone into download mode and connected it to Odin Loaded the md5 file in to the AP section of odin and hit start. Now it says firmware upgrade encountered please select recovery mode in kies. Also at the top left it says
Current Binary: Samsung Official
System Status: Custom
Does anyone know how i could fix this or if i could reinstall a custom binary or kernel from lineage.
I would like to just get my old pictures off the phone. Or would i have to connect to kies and install original firmware and just re flash a new rom?
If i brick the phone i brick it i use a S7 now. I don't know if this makes sense but i might need some help.
Try flashing TWRP again.
Couple of nights ago my Note 4 (American T-Mobile SM-N910T) started boot looping. I've rooted, flashed recovery and all that jazz so I did what I assumed was the fix. I tried to reflash the stock rom and reset the entire system.
Boot to recovery
Cache wipe
Factory Reset
Didn't work......
Load up Odin
Flash N910TUVU2EQI2 (which I believe is the latest Note 4 firmware as of 2017?)
Odin fails like step one.
"SW REV CHECK FAIL : [aboot]Fused 2 > Binary 1
[1]eMMC Write Fail: ABOOT
Now I'm not completely uneducated on this. It sounds like it's saying the boot loader is a higher version than the firmware? I don't see how... Am I getting something wrong here?
I've always done OTA updates when they became available.
EDIT: JK turns out I'm just an idiot and was using a 4 year old version of Odin.... works fine now.