Related
Anybody managed to compile OpenSwift 2.2.1 from github? I'm trying to do that for 2 days without success.
My last error is:
Code:
Install: out/target/product/swift/system/lib/libdiskconfig.so
Install: out/target/product/swift/system/bin/vold
Symlink: out/target/product/swift/system/bin/watchprops -> toolbox
Symlink: out/target/product/swift/system/bin/wipe -> toolbox
target Strip: wpa_cli (out/target/product/swift/obj/EXECUTABLES/wpa_cli_intermediates/wpa_cli)
Install: out/target/product/swift/system/bin/wpa_cli
target Strip: wpa_supplicant (out/target/product/swift/obj/EXECUTABLES/wpa_supplicant_intermediates/wpa_supplicant)
Copy: out/target/product/swift/system/bin/wpa_supplicant
target Strip: zipalign (out/target/product/swift/obj/EXECUTABLES/zipalign_intermediates/zipalign)
Install: out/target/product/swift/system/bin/zipalign
Target buildinfo: out/target/product/swift/system/build.prop
/bin/bash: -c: line 0: unexpected EOF while looking for matching `"'
/bin/bash: -c: line 1: syntax error: unexpected end of file
make: *** [out/target/product/swift/system/build.prop] Error 1
make: *** Deleting file `out/target/product/swift/system/build.prop'
Maybe we can share experience about compilation of OpenSwift in this thread?
I have the same issue. But not find a solution yet.
Early I've success compile whole system. But after last updates from github gets errors.
I found solutions for all recent errors on 4pda.ru.
This is the original post:
http://4pda.ru/forum/index.php?s=&showtopic=215440&view=findpost&p=6414296
just got wubi ubuntu 10.10 installed and git and python were a nightmare and repo wouldnt work until i went and edited repo myself so it installed fine. i worked out how to install python2.4 on 10.10 and git running nicely. when i do the sync command it starts downloading the whole cyanogen mod tree i just want whats on the openswift branch thats it. any advice on the whole source codes and compiling would be greatly apppreciated.
I have already discussed how to unpack/repack the boot.img file.
Now let's try to recompile the android kernel.
You will need some packages not included in a default Ubuntu 11.04 installation:
Code:
sudo apt-get install git unrar libncurses5-dev qt3-dev-tools
Unrar and git are the only necessary packages.
Install libncurses if you want to modify the kernel configuration with the command line menu.
Otherwise, if you want a graphical interface, go with qt3.
Please refer to the documentation of your linux distro for help on how to install additional packages.
For the purpose of this guide we are going to rebuild the official asus kernel with no modifications.
Download the latest kernel source from the ASUS site (atm 2.6.36.3)
Code:
wget http://dlcdnet.asus.com/pub/ASUS/EeePAD/TF101/Eee_PAD_TF101_Kernel_Code_8_4_4_11.rar
Now unpack it:
Code:
unrar e Eee_PAD_TF101_Kernel_Code_8_4_4_11.rar
tar xvfz kernel-3eb19ec-fix-lic.tar.gz
We need a config file for the compile process.
The config file essentially sets features ON or OFF from the final kernel (yes, I know that is much more than this...).
If your tablet is upgraded to the latest build (8.4.4.11) you can extract the config file from your running device:
Code:
adb pull /proc/config.gz ./
Or you can find it attached to this post (the forum won't allow to upload a .gz file, so i made a .zip file; use unzip instead of gunzip).
Now uncompress and move it into the kernel dir (renaming it in .config).
Code:
gunzip config.gz
cp config kernel-3eb19ec/.config
Now the not-so-fun part.
We will need a compiler for the arm platform.
The android source comes with the arm compiler. You can download it following this instructions http://source.android.com/source/downloading.html .
The only problem is that the repository is about 2.6GB...
So we are going to download only the prebuilt toolchain (1,8GB):
Code:
git clone git://android.git.kernel.org/platform/prebuilt.git
After git finishes his download, you will have a new directory called "toolchain".
We have to set some environment variables (i assume you have downloaded the toolchain in your home directory):
Code:
export ARCH=arm
export CROSS_COMPILE=arm-eabi-
export PATH=$PATH:~/toolchain/prebuilt/linux-x86/toolchain/arm-eabi-4.4.3/bin/
Ok, the compiler is installed and configured.
It's time to come back to the kernel source.
If you want to modify some settings in your config file (!!AT YOUR OWN RISK!!) you can edit the .config file or use a graphical interface.
Code:
cd kernel-3eb19ec
make xconfig (make menuconfig if you prefer a command-line menu)
Now we can compile the android kernel:
Code:
make -j4
Our new kernel is stored in : arch/arm/boot/zImage
We can use it for make a boot image and flash in our TF101 (use this guide http://forum.xda-developers.com/showthread.php?t=1193737)
Let me say this again: I'm not an expert in android kernel/compiler.
If you find something wrong with this guide, please tell me.
I've learned this with google and by trial and error.
If you brick something don't blame on me.
If you want to hit "thanks", you're welcome.
Have Fun!
Pulling out config.gz you will get the current kernel configuration...it could not fit the stock kernel..
gnufabio said:
Pulling out config.gz you will get the current kernel configuration...it could not fit the stock kernel..
Click to expand...
Click to collapse
Of course the kernel source has to be exactly the same version as the running kernel for this to work.
In this example, the source and running kernel were both 2.6.36.3 (build 8.4.4.11).
For use an older .config (or a newer source tree), we should run:
Code:
make oldconfig
to adapt them (...kinda).
Thanks for point this out.
I was eventually planning on making this guide, good work!
gnufabio said:
Pulling out config.gz you will get the current kernel configuration...it could not fit the stock kernel..
Click to expand...
Click to collapse
This is a possibility if anything in the config changes from the kernel you're running in the actual source Asus has posted
I've always done the following:
Code:
make tegra_defconfig
make
I haven't actually checked to see if this is up to date with a running kernel, just noticed Asus pops up a few times in there.
Actually this is the default TF101 config: tf101_defconfig
Thanks for the guides. These are really helpful -
Hashi
I'm getting this set of errors. I've built and modified many linux kernels, so I'm guessing this is in the toolchain area, and am wondering if it needs to know something else for where to look at dynamic load libraries, etc?
I created a shell script to setup / export the shell environment vars. It looks like this:
Code:
export ARCH=arm
export CROSS_COMPILE=arm-eabi-
export PATH=$PATH:~/sandbox/android-sdk-linux_x86/toolchain/prebuilt/linux-x86/toolchain/arm-eabi-4.4.3/bin/
I'm using a PC I use for work ARM cross compiles that is 64 bit Ubuntu 9.10.
Thanks --
--- make -j4 errors ---
Code:
[email protected]:~/sandbox/android-sdk-linux_x86/kernel/kernel-3eb19ec$ make -j4
arm-eabi-gcc: /lib32/libc.so.6: version `GLIBC_2.11' not found (required by arm-eabi-gcc)
CHK include/linux/version.h
CHK include/generated/utsrelease.h
CC scripts/mod/empty.o
arm-eabi-gcc: /lib32/libc.so.6: version `GLIBC_2.11' not found (required by arm-eabi-gcc)
make[2]: *** [scripts/mod/empty.o] Error 1
make[2]: *** Waiting for unfinished jobs....
make[1]: `include/generated/mach-types.h' is up to date.
make[1]: *** [scripts/mod] Error 2
CC kernel/bounds.s
arm-eabi-gcc: /lib32/libc.so.6: version `GLIBC_2.11' not found (required by arm-eabi-gcc)
make: *** [scripts] Error 2
make: *** Waiting for unfinished jobs....
make[1]: *** [kernel/bounds.s] Error 1
make: *** [prepare0] Error 2
[email protected]:~/sandbox/android-sdk-linux_x86/kernel/kernel-3eb19ec$
In searching for the basic problem, that arm*gcc can't see libc.so.6 in the version it wants, I think it's not seeing this at all:
~/sandbox/android-sdk-linux_x86/kernel/kernel-3eb19ec$ find ../../toolchain/ -iname libc.so.6 -exec ls -al {} \;
lrwxrwxrwx 1 hashi hashi 11 2011-08-01 15:58 ../../toolchain/prebuilt/linux-x86/toolchain/i686-linux-glibc2.7-4.4.3/sysroot/usr/lib/libc.so.6 -> libc-2.7.so
[email protected]:~/sandbox/android-sdk-linux_x86/kernel/kernel-3eb19ec$
thanks. I'm not new to kernel compiling but I'm new to android
hachamacha said:
I'm getting this set of errors. I've built and modified many linux kernels, so I'm guessing this is in the toolchain area, and am wondering if it needs to know something else for where to look at dynamic load libraries, etc?
I created a shell script to setup / export the shell environment vars. It looks like this:
Code:
export ARCH=arm
export CROSS_COMPILE=arm-eabi-
export PATH=$PATH:~/sandbox/android-sdk-linux_x86/toolchain/prebuilt/linux-x86/toolchain/arm-eabi-4.4.3/bin/
I'm using a PC I use for work ARM cross compiles that is 64 bit Ubuntu 9.10.
Thanks --
--- make -j4 errors ---
Code:
[email protected]:~/sandbox/android-sdk-linux_x86/kernel/kernel-3eb19ec$ make -j4
arm-eabi-gcc: /lib32/libc.so.6: version `GLIBC_2.11' not found (required by arm-eabi-gcc)
CHK include/linux/version.h
CHK include/generated/utsrelease.h
CC scripts/mod/empty.o
arm-eabi-gcc: /lib32/libc.so.6: version `GLIBC_2.11' not found (required by arm-eabi-gcc)
make[2]: *** [scripts/mod/empty.o] Error 1
make[2]: *** Waiting for unfinished jobs....
make[1]: `include/generated/mach-types.h' is up to date.
make[1]: *** [scripts/mod] Error 2
CC kernel/bounds.s
arm-eabi-gcc: /lib32/libc.so.6: version `GLIBC_2.11' not found (required by arm-eabi-gcc)
make: *** [scripts] Error 2
make: *** Waiting for unfinished jobs....
make[1]: *** [kernel/bounds.s] Error 1
make: *** [prepare0] Error 2
[email protected]:~/sandbox/android-sdk-linux_x86/kernel/kernel-3eb19ec$
In searching for the basic problem, that arm*gcc can't see libc.so.6 in the version it wants, I think it's not seeing this at all:
~/sandbox/android-sdk-linux_x86/kernel/kernel-3eb19ec$ find ../../toolchain/ -iname libc.so.6 -exec ls -al {} \;
lrwxrwxrwx 1 hashi hashi 11 2011-08-01 15:58 ../../toolchain/prebuilt/linux-x86/toolchain/i686-linux-glibc2.7-4.4.3/sysroot/usr/lib/libc.so.6 -> libc-2.7.so
[email protected]:~/sandbox/android-sdk-linux_x86/kernel/kernel-3eb19ec$
Click to expand...
Click to collapse
The toolchain has everything it needs for compile the kernel.
The problem seems to be your 64 bit...
The arm compiler is built against 32bit version of glibc library; I think you already have a multilib environment (you have a /lib32 dir). Maybe the 32bit verion of the glibc is not the correct version.
Try this command:
Code:
ldd ~/sandbox/android-sdk-linux_x86/toolchain/prebuilt/linux-x86/toolchain/arm-eabi-4.4.3/bin/arm-eabi-gcc
And look what it says for the libc.so.6. In my system it says it is located in /lib/i386-linux-gnu/libc.so.6. So if I run it:
Code:
$ /lib/i386-linux-gnu/libc.so.6
GNU C Library (Ubuntu EGLIBC 2.13-0ubuntu13) stable release version 2.13, by Roland McGrath et al.
Copyright (C) 2011 Free Software Foundation, Inc.
This is free software; see the source for copying conditions.
There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A
PARTICULAR PURPOSE.
Compiled by GNU CC version 4.5.2.
Compiled on a Linux 2.6.38 system on 2011-04-11.
Available extensions:
crypt add-on version 2.1 by Michael Glad and others
GNU Libidn by Simon Josefsson
Native POSIX Threads Library by Ulrich Drepper et al
BIND-8.2.3-T5B
libc ABIs: UNIQUE IFUNC
For bug reporting instructions, please see:
<http://www.debian.org/Bugs/>.
The first line tell the version number. If it's older than 2.11 you need to update your multilib libc.
gnufabio said:
Actually this is the default TF101 config: tf101_defconfig
Click to expand...
Click to collapse
This is for 2.6.36.3 but seems way older. It says "Fri Mar 25 19:50:17 2011".
Maybe it's from an old build?
The last ASUS config (the one attached to the first post) is "Mon Jul 11 14:47:43 2011".
Brilliant!
I had problems cloning using the git protocol because of a corporate firewall, but the HTTP method worked fine:
Code:
http://android.git.kernel.org/platform/prebuilt.git
I also found the the toolchain with the Android NDK failed to build the kernel but the one linked to in the OP worked perfectly.
SammyC said:
I also found the the toolchain with the Android NDK failed to build the kernel but the one linked to in the OP worked perfectly.
Click to expand...
Click to collapse
Yes, I have tried this also, with the same result.
Someone said that the codesourcery compiler can compile the android kernel.
I have tried, it compiles all, but when i flash on the tablet it stucks on the boot screen.
Initially I wrote the guide using this compiler (it's smaller and has a graphical installer), when i realized that it doesn't work , i switched back to the android official compiler.
If someone want to try with the codesourcery compiler here's the (unsuccessful) process I have used:
!!ATTENTION!!: ATM THIS DOESN'T WORK
An easier (and somewhat faster) way is downloading the Code Sorcery's "Code Bench" compiler (http://www.codesourcery.com/) and install it.
Code:
wget http://www.codesourcery.com/sgpp/lite/arm/portal/package8741/public/arm-none-linux-gnueabi/arm-2011.03-41-arm-none-linux-gnueabi.bin
This compiler need some extra packages to work in Ubuntu:
Code:
sudo apt-get install git-core gnupg flex bison gperf libsdl-dev libesd0-dev libwxgtk2.6-dev build-essential zip curl libncurses5-dev zlib1g-dev valgrind
For some reason, in Ubuntu 11.04 the /bin/sh link refer to the dash shell and not bash.
The compiler's installer will comply for this, so we do as follows:
Code:
sudo dpkg-reconfigure -plow dash
and when it asks to use dash as the default shell, click on "NO"
Code:
sh arm-2011.03-41-arm-none-linux-gnueabi.bin
Leave all the default options. The installer will copy the files in your home directory.
We should set some environmet variables:
Code:
export ARCH=arm
export CROSS_COMPILE=arm-none-linux-gnueabi-
export PATH=$PATH:~/CodeSourcery/Sourcery_G++_Lite/bin
Click to expand...
Click to collapse
Then continue with the guide from the "make xconfig".
If someone can make it work with this compiler, could be so gentle to tell us how?
rebound821 said:
The toolchain has everything it needs for compile the kernel.
The problem seems to be your 64 bit...
The arm compiler is built against 32bit version of glibc library; I think you already have a multilib environment (you have a /lib32 dir). Maybe the 32bit verion of the glibc is not the correct version.
Try this command:
Code:
ldd ~/sandbox/android-sdk-linux_x86/toolchain/prebuilt/linux-x86/toolchain/arm-eabi-4.4.3/bin/arm-eabi-gcc
And look what it says for the libc.so.6. In my system it says it is located in /lib/i386-linux-gnu/libc.so.6. So if I run it:
Code:
$ /lib/i386-linux-gnu/libc.so.6
GNU C Library (Ubuntu EGLIBC 2.13-0ubuntu13) stable release version 2.13, by Roland McGrath et al.
Copyright (C) 2011 Free Software Foundation, Inc.
This is free software; see the source for copying conditions.
There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A
PARTICULAR PURPOSE.
Compiled by GNU CC version 4.5.2.
Compiled on a Linux 2.6.38 system on 2011-04-11.
Available extensions:
crypt add-on version 2.1 by Michael Glad and others
GNU Libidn by Simon Josefsson
Native POSIX Threads Library by Ulrich Drepper et al
BIND-8.2.3-T5B
libc ABIs: UNIQUE IFUNC
For bug reporting instructions, please see:
<http://www.debian.org/Bugs/>.
The first line tell the version number. If it's older than 2.11 you need to update your multilib libc.
Click to expand...
Click to collapse
Thanks again -- I'll try that out as soon as I'm back in TF mode.
Code:
~/sandbox/android-sdk-linux_x86/toolchain/prebuilt/linux-x86/toolchain/arm-eabi-4.4.3/bin/arm-eabi-gcc: /lib32/libc.so.6: version `GLIBC_2.11' not found (required by ~/sandbox/android-sdk-linux_x86/toolchain/prebuilt/linux-x86/toolchain/arm-eabi-4.4.3/bin/arm-eabi-gcc)
linux-gate.so.1 => (0xf77e0000)
libc.so.6 => /lib32/libc.so.6 (0xf7677000)
/lib/ld-linux.so.2 (0xf77e1000)
^^ that was from the first command
Code:
GNU C Library (EGLIBC) stable release version 2.10.1, by Roland McGrath et al.
Copyright (C) 2009 Free Software Foundation, Inc.
This is free software; see the source for copying conditions.
There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A
PARTICULAR PURPOSE.
Compiled by GNU CC version 4.4.1.
Compiled on a Linux >>2.6.24-27-server<< system on 2011-01-11.
Available extensions:
crypt add-on version 2.1 by Michael Glad and others
GNU Libidn by Simon Josefsson
Native POSIX Threads Library by Ulrich Drepper et al
BIND-8.2.3-T5B
For bug reporting instructions, please see:
<http://www.eglibc.org/issues/>.
And ^^ from the second.
It looks like with 9.10 Ubuntu, (backporting something from 10 or 11.x notwithstanding), I can't easily get to GLIBC 2.11 from GLIBC 2.10.x. Thanks. I'll put together an 11.x VM for this task.
For 64bit machines, you might need to do the following?
apt-get install ia32-libs
raypou said:
For 64bit machines, you might need to do the following?
apt-get install ia32-libs
Click to expand...
Click to collapse
Thanks, I managed to download a ARM toolchain from their site that works fine with Ubuntu 9.10 64 bit.
Whether or not it'll run when I try to install a kernel is another question, but it builds without problem and produces ARM code.
rebound821 said:
Yes, I have tried this also, with the same result.
Someone said that the codesourcery compiler can compile the android kernel.
I have tried, it compiles all, but when i flash on the tablet it stucks on the boot screen.
Initially I wrote the guide using this compiler (it's smaller and has a graphical installer), when i realized that it doesn't work , i switched back to the android official compiler.
If someone want to try with the codesourcery compiler here's the (unsuccessful) process I have used:
!!ATTENTION!!: ATM THIS DOESN'T WORK
Then continue with the guide from the "make xconfig".
If someone can make it work with this compiler, could be so gentle to tell us how?
Click to expand...
Click to collapse
Wow can't believe I found this thread. I just want to confirm that I'm also having a horrible time with the code sourcery toolchain trying to compile the android kernel, the moto atrix kernel specifically. The zimage compiles, but flashing to the device it just hangs.
So im currently downloading the official android toolchain.
Also some learned knowledge for everybody, the correct code sourcery toolchain supposedly android equivalent is arm-none-linux-gnueabi-, NOT the arm-none-eabi- or any of the others. This info is very hard to find fyi.
However as this thread seems to prove, even using the correct one doesn't exactly work.
Hi,
I'm trying to build the stock Memo Pad smart(ME301t) stock kernel 10.6.1.29 downloaded directly from asus.
I used 4.3.3 to 4.7 toolchains with similar results(give or take some deprecated compiler arguments).
What I really want to know is why I'm getting a lot of warnings(NOT ERRORS), some of them are minor errors like "unused function" and some of them are major warnings breaking function functionality. Some of the builds don't even boot.
What toolchain should I use with this kernel?
Why a stock kernel(from asus) should produce warnings at the first place?
I'm on linux BTW.
Hi all,
I'm trying to build CyanogenMod for intl G2 (the only change I've made is to add halo)
for the repo init I've done:
Code:
repo init -u git://github.com/CyanogenMod/android.git -b cm-11.0 -g all,-notdefault,d802,lge
And then repo sync -j8
After that, like I've said, I've added halo.
And now I'm trying to build by doing:
Code:
$ source build/envsetup.sh
$ breakfast d802
but the only things I get is:
Code:
[email protected]:~/CM/G2# breakfast d802
including vendor/cm/vendorsetup.sh
build/core/product_config.mk:238: *** _nic.PRODUCTS.[[device/lge/d802/cm.mk]]: "device/lge/g2-common/g2.mk" does not exist. Arrêt.
Device d802 not found. Attempting to retrieve device repository from CyanogenMod Github (http://github.com/CyanogenMod).
Traceback (most recent call last):
File "build/tools/roomservice.py", line 76, in <module>
result = json.loads(urllib.request.urlopen(githubreq).read().decode())
File "/usr/lib/python2.7/urllib2.py", line 127, in urlopen
return _opener.open(url, data, timeout)
File "/usr/lib/python2.7/urllib2.py", line 410, in open
response = meth(req, response)
File "/usr/lib/python2.7/urllib2.py", line 523, in http_response
'http', request, response, code, msg, hdrs)
File "/usr/lib/python2.7/urllib2.py", line 448, in error
return self._call_chain(*args)
File "/usr/lib/python2.7/urllib2.py", line 382, in _call_chain
result = func(*args)
File "/usr/lib/python2.7/urllib2.py", line 531, in http_error_default
raise HTTPError(req.get_full_url(), code, msg, hdrs, fp)
urllib2.HTTPError: HTTP Error 403: Forbidden
build/core/product_config.mk:238: *** _nic.PRODUCTS.[[device/lge/d802/cm.mk]]: "device/lge/g2-common/g2.mk" does not exist. Arrêt.
** Don't have a product spec for: 'cm_d802'
** Do you have the right repo manifest?
I don't understand because when I take a look to device, there is no lge/d802 directory. By doing the init command, I would have to download specific files
also lunch and breakfast command gave me the same error...
Do you have an idea where I'm wrong and what can I do ? I think I've to download device specific files but how can I do this (if this is the error), normally before building, the files are downloaded ? I don't see...
Thanks in advance !
Up, if someone can help me :fingers-crossed:
I have the same problem, someone can help?
Code:
build/core/Makefile:70: warning: overriding commands for target `/home/karishnu/android/omni/out/target/product/mako/system/vendor/etc/audio_effects.conf'
build/core/base_rules.mk:529: warning: ignoring old commands for target `/home/karishnu/android/omni/out/target/product/mako/system/vendor/etc/audio_effects.conf'
No private recovery resources for TARGET_DEVICE mako
host C: mkbootimg <= system/core/mkbootimg/mkbootimg.c
prebuilts/tools/gcc-sdk/gcc: line 40: prebuilts/tools/gcc-sdk/../../gcc/linux-x86/host/i686-linux-glibc2.7-4.6/bin/i686-linux-gcc: No such file or directory
make: *** [/home/karishnu/android/omni/out/host/linux-x86/obj/EXECUTABLES/mkbootimg_intermediates/mkbootimg.o] Error 127
real 2m5.615s
user 0m54.109s
sys 0m20.064s
while building for mako I get this error. I resynced the repo many times. Have no clue why i get this error. Using ubuntu 13.10 for building. i have also tried
Code:
breakfast mako
That is no error but a warning
Sent from my N1 using Tapatalk
maxwen said:
That is no error but a warning
Sent from my N1 using Tapatalk
Click to expand...
Click to collapse
I mean the no such file or directory error. anyway the build process stops after giving that error.
This is My first post on XDA
From the day I owned YUreka I always wished to compile my own kernel. I searched on the web for compiling 64bit android kernel but didn't get satisfying results. So I did some research and asked some android developers, I got help from some developers but some of the developer refused may be due to their attitude or may be they didn't want to share their ideas / knowledge. Anyways here's a guide for compiling 64 bit kernel. I have also made a video tutorial check that out [ status == uploaded ].
What will YU need :
1. Ubuntu 64 Bit OS
2. Good Internet Connection.
3. Usable Brain.
4. Basic Knowledge of Linux.
Lets Start
First we need to get some important stuff / tools / software .
1. Open Ubuntu Software center and install JDK 7 or JDK 8
2. Open terminal and run the following command
Code:
sudo apt-get install libncurses5-dev
Code:
sudo apt-get install git-core gnupg flex bison gperf build-essential zip curl libc6-dev libncurses5-dev:i386 x11proto-core-dev libx11-dev:i386 libreadline6-dev:i386 libgl1-mesa-glx:i386 libgl1-mesa-dev g++-multilib tofrodos python-markdown libxml2-utils xsltproc zlib1g-dev:i386
Code:
sudo ln -s /usr/lib/i386-linux-gnu/mesa/libGL.so.1 /usr/lib/i386-linux-gnu/libGL.so
Code:
sudo apt-get install -y ccache &&echo 'export PATH="/usr/lib/ccache:$PATH"' | tee -a ~/.bashrc &&source ~/.bashrc && echo $PATH
Code:
export USE_CCACHE=1
Code:
mkdir ~/bin
Code:
export PATH=~/bin:$PATH
Code:
curl https://dl-ssl.google.com/dl/googlesource/git-repo/repo > ~/bin/repo
Code:
chmod a+x ~/bin/repo
Now YU'r Linux machine is all set to compile kernel.
3. Now YU need to download a toolchain. I have uploaded the toolchain that i used for compiling the kernel. Click from here > h t t p s ://drive.google.com/open?id=0B9D4jOdpRzZHOURMTS1VaXplc0U
4. Time to download Kernel sources. For this tutorial I am using Varun Chitre's Thunderzap kernel. Here is the link for thunderzap's sources > h t t p s ://github.com/varunchitre15/thunderzap_tomato
.Select branch as cm 12.1 from left and press download on the right.
5. Make a directory "android-kernel" under "/Home" and place both the zips in "android-kernel" directory.
6. Extract both the zips. Now YU will have two folders one of toolchain and other of kernel source.
7. YU no more need the zip files just delete both the zips.
8. Open the kernel source folder and type the following code.
9. Run the following command to point the variable to toolchains path :
Code:
export CROSS_COMPILE=/home/r0h4n/android-kernel/aarch64-linux-android-4.9-uber-master/bin/aarch64-linux-android-
If YU followed along with me YU will just have to change the name of the user ( replace <r0h4n> with <YU'r username> )
10. Time to Compile your kernel :
Code:
export ARCH=arm64
Code:
export SUBARCH=arm64
Code:
export USE_CCACHE=1
Code:
make cyanogenmod_tomato-64_defconfig
The name of defconfig file may be different check it in "kernel_source/arch/arm64/defconfig/"
Code:
make menuconfig
Here YU can explore various options. I'll not explain everything in detail here.
Now the final command make. It takes a parameter -jn. Where ( n = # of threads per core + 1 )
I have a Dual core processor with 2 thread per processor so for me it is " make -j3 ".
Code:
make -j3
Now sit back and relax.......let the kernel compile
Got a compilation error ?
Post it here.
Now we need to create a flashable zip. Download this kernel flash zip from here > h t t p s : //drive.google.com/open?id=0B9D4jOdpRzZHdTJibndqQzhVdFk
1. Extract kernel.zip.
2. Navigate to tools in "/kernel".
3. Open "kernel_source/arch/arm64/boot/".
4. Copy "Image".
5. Replace it with the "Image" in "/kernel/tools/Image".
6. Copy "kernel_source/driver/stagging/prima/wlan.ko" and replace it with "kernel/system/lib/modules/wlan.ko".
7. Goto "/kernel" select all the three folders "META-INF", "system", "tools" and rezip it.
8. Flash the zip via recovery and now YU'r Phone rocks YU'r own compile kernel.
Rohan459 said:
This is My first post on XDA
Click to expand...
Click to collapse
Life saver for the 64bit part, thank you very much! :good::good::good:
some issues
Hello, i'm trying to compile this kernel (for xiaomi redmi note 3 "kenzo") https://github.com/cyanogenmod/android_kernel_xiaomi_msm8956/tree/stable/cm-13.0-ZNH5Y, and get the flashable zip.
I made a few tries and i can't do it, i going to tell you my problems and how i could fix some of them.
Error 1:
when i try to compile i get this error:
scripts/Makefile.build:455: recipe for target 'drivers/video/msm' failed
make[2]: *** [drivers/video/msm] Error 2
scripts/Makefile.build:455: recipe for target 'drivers/video' failed
make[1]: *** [drivers/video] Error 2
make[1]: *** Waiting for unfinished jobs....
I solved it changing a line in /home/user/Desktop/android_kernel_xiaomi_msm8956-stable-cm-13.0-ZNH5Y/drivers/video/msm/msm_dba/msm_dba.c
I changed #include <msm_dba_internal.h> for rhis #include "msm_dba_internal.h"
After that i get another error.
Error 2:
After solve Error 1, when i try to compile i get this error:
make[1]: *** No rule to make target 'arch/arm64/boot/dts/msm8956-mtp.dtb', needed by 'arch/arm64/boot/Image.gz-dtb'. Stop.
make[1]: *** Waiting for unfinished jobs....
OBJCOPY arch/arm64/boot/Image
/home/guille/Desktop/android_kernel_xiaomi_msm8956-stable-cm-13.0-ZNH5Y/arch/arm64/Makefile:84: recipe for target 'Image.gz-dtb' failed
make: *** [Image.gz-dtb] Error 2
make: *** Waiting for unfinished jobs....
This error i solved disabling this line #CONFIG_BUILD_ARM64_APPENDED_DTB_IMAGE=y in cyanogenmod_kenzo_defconfig, but i don't know if this is the correct way.
After that changes i get finally the image (used in the tutorial) and image.gz, then i proced to put the image and wlan.ko in in kernel.zip, but when i flash it the phone don't boot.
What can i do?
P.S.: Sorry my bad english.
Hello the friend really super guide and especially the only one or with whom I managed to compile my own kernel.
Is especially as said in the OP I contact a lot of kernel dev and nobody answered so I will have only one person to thank lol.
omega691 said:
Hello, i'm trying to compile this kernel (for xiaomi redmi note 3 "kenzo") https://github.com/cyanogenmod/android_kernel_xiaomi_msm8956/tree/stable/cm-13.0-ZNH5Y, and get the flashable zip.
I made a few tries and i can't do it, i going to tell you my problems and how i could fix some of them.
Error 1:
when i try to compile i get this error:
scripts/Makefile.build:455: recipe for target 'drivers/video/msm' failed
make[2]: *** [drivers/video/msm] Error 2
scripts/Makefile.build:455: recipe for target 'drivers/video' failed
make[1]: *** [drivers/video] Error 2
make[1]: *** Waiting for unfinished jobs....
I solved it changing a line in /home/user/Desktop/android_kernel_xiaomi_msm8956-stable-cm-13.0-ZNH5Y/drivers/video/msm/msm_dba/msm_dba.c
I changed #include <msm_dba_internal.h> for rhis #include "msm_dba_internal.h"
After that i get another error.
Error 2:
After solve Error 1, when i try to compile i get this error:
make[1]: *** No rule to make target 'arch/arm64/boot/dts/msm8956-mtp.dtb', needed by 'arch/arm64/boot/Image.gz-dtb'. Stop.
make[1]: *** Waiting for unfinished jobs....
OBJCOPY arch/arm64/boot/Image
/home/guille/Desktop/android_kernel_xiaomi_msm8956-stable-cm-13.0-ZNH5Y/arch/arm64/Makefile:84: recipe for target 'Image.gz-dtb' failed
make: *** [Image.gz-dtb] Error 2
make: *** Waiting for unfinished jobs....
This error i solved disabling this line #CONFIG_BUILD_ARM64_APPENDED_DTB_IMAGE=y in cyanogenmod_kenzo_defconfig, but i don't know if this is the correct way.
After that changes i get finally the image (used in the tutorial) and image.gz, then i proced to put the image and wlan.ko in in kernel.zip, but when i flash it the phone don't boot.
What can i do?
P.S.: Sorry my bad english.
Click to expand...
Click to collapse
Change directory and try again
Sent from my Redmi 3S using Tapatalk
i have this error:
sound/soc/msm/msm8996.c:34:26: fatal error: device_event.h: No such file or directory
#include <device_event.h>
^
compilation terminated.
i'm on ubuntu 16.04.02 x64
i think the problem is the library "libevent-dev" but i don't understand how to fix it because libevent-dev is installed
problem in yureka
i rooted my phone long back.. but i didnt used it...lots of problems in it it is in boot loop amd when ever it is luckily on wifi is not working ...it is not even displaying near by wifi and not even data connection ,i thought of new cm12 rom and flashed it stiill same issue. and more over after flashing stock cm12 and it is still in boot loop..please help
Hello there,
i am having this said problem when i follow your tutorial on how to build a 64bit kernel.
Code:
In file included from include/linux/compiler.h:54:0,
from include/uapi/linux/stddef.h:1,
from include/linux/stddef.h:4,
from /home/protox/android/berlin_kernel/include/uapi/linux/posix_types.h:4,
from include/uapi/linux/types.h:13,
from include/linux/types.h:5,
from include/linux/mod_devicetable.h:11,
from scripts/mod/devicetable-offsets.c:2:
include/linux/compiler-gcc.h:106:30: fatal error: linux/compiler-gcc7.h: No such file or directory
#include gcc_header(__GNUC__)
^
compilation terminated.
/home/protox/android/berlin_kernel/scripts/mod/Makefile:34: recipe for target 'scripts/mod/devicetable-offsets.s' failed
make[2]: *** [scripts/mod/devicetable-offsets.s] Error 1
scripts/Makefile.build:468: recipe for target 'scripts/mod' failed
make[1]: *** [scripts/mod] Error 2
make[1]: *** Waiting for unfinished jobs....
HOSTCC scripts/dtc/livetree.o
HOSTCC scripts/dtc/srcpos.o
HOSTCC scripts/dtc/treesource.o
HOSTCC scripts/dtc/util.o
HOSTCC scripts/dtc/dtc-lexer.lex.o
HOSTCC scripts/dtc/dtc-parser.tab.o
HOSTLD scripts/dtc/dtc
Makefile:559: recipe for target 'scripts' failed
make: *** [scripts] Error 2
make: *** Waiting for unfinished jobs....
Can you please help me out mate
Thanks
hello sir can you help me please??
my device is redmi note 4x ( mido ) snapdragon 625 64 bit i build kernel without error but when i want to flash it on my device
device not boot to system but to fastboot mod and need to flash other kernel to make it boot ?? any idea about that ?
Compiling kernrl
I need some help if any body is out there .after months of trying and trying i am finally able to compli my kernel .after is completes with no error i go to arch/arm64/boot and all i have is am image.gz and and image no ziamge or nothing ive goigle it but i cant figure out whats the next step
akino553 said:
hello sir can you help me please??
my device is redmi note 4x ( mido ) snapdragon 625 64 bit i build kernel without error but when i want to flash it on my device
device not boot to system but to fastboot mod and need to flash other kernel to make it boot ?? any idea about that ?
Click to expand...
Click to collapse
The kernel has not compiled properly...
fowler82 said:
I need some help if any body is out there .after months of trying and trying i am finally able to compli my kernel .after is completes with no error i go to arch/arm64/boot and all i have is am image.gz and and image no ziamge or nothing ive goigle it but i cant figure out whats the next step
Click to expand...
Click to collapse
Find a zip with the image.gz and image file and replace the files with ur compiled files.
Rohan459 said:
Find a zip with the image.gz and image file and replace the files with ur compiled files.
Click to expand...
Click to collapse
Once I build the kernel and I build the modules how do i find them to load them does anybody no
Toolchains
fowler82 said:
Once I build the kernel and I build the modules how do i find them to load them does anybody no
Click to expand...
Click to collapse
go in kernel root directory and within search box look for .ko files. It will give you a list of modules from where you can copy them and paste in your new ROM system/lib/modules directory.
can any device use the kernel.zip to flash the boot.img after replacing wlan.ko ?
Rohan459 said:
This is My first post on XDA
From the day I owned YUreka I always wished to compile my own kernel. I searched on the web for compiling 64bit android kernel but didn't get satisfying results. So I did some research and asked some android developers, I got help from some developers but some of the developer refused may be due to their attitude or may be they didn't want to share their ideas / knowledge. Anyways here's a guide for compiling 64 bit kernel. I have also made a video tutorial check that out [ status == uploaded ].
What will YU need :
1. Ubuntu 64 Bit OS
2. Good Internet Connection.
3. Usable Brain.
4. Basic Knowledge of Linux.
Lets Start
First we need to get some important stuff / tools / software .
1. Open Ubuntu Software center and install JDK 7 or JDK 8
2. Open terminal and run the following command
Code:
sudo apt-get install libncurses5-dev
Code:
sudo apt-get install git-core gnupg flex bison gperf build-essential zip curl libc6-dev libncurses5-dev:i386 x11proto-core-dev libx11-dev:i386 libreadline6-dev:i386 libgl1-mesa-glx:i386 libgl1-mesa-dev g++-multilib tofrodos python-markdown libxml2-utils xsltproc zlib1g-dev:i386
Code:
sudo ln -s /usr/lib/i386-linux-gnu/mesa/libGL.so.1 /usr/lib/i386-linux-gnu/libGL.so
Code:
sudo apt-get install -y ccache &&echo 'export PATH="/usr/lib/ccache:$PATH"' | tee -a ~/.bashrc &&source ~/.bashrc && echo $PATH
Code:
export USE_CCACHE=1
Code:
mkdir ~/bin
Code:
export PATH=~/bin:$PATH
Code:
curl https://dl-ssl.google.com/dl/googlesource/git-repo/repo > ~/bin/repo
Code:
chmod a+x ~/bin/repo
Now YU'r Linux machine is all set to compile kernel.
3. Now YU need to download a toolchain. I have uploaded the toolchain that i used for compiling the kernel. Click from here > h t t p s ://drive.google.com/open?id=0B9D4jOdpRzZHOURMTS1VaXplc0U
4. Time to download Kernel sources. For this tutorial I am using Varun Chitre's Thunderzap kernel. Here is the link for thunderzap's sources > h t t p s ://github.com/varunchitre15/thunderzap_tomato
.Select branch as cm 12.1 from left and press download on the right.
5. Make a directory "android-kernel" under "/Home" and place both the zips in "android-kernel" directory.
6. Extract both the zips. Now YU will have two folders one of toolchain and other of kernel source.
7. YU no more need the zip files just delete both the zips.
8. Open the kernel source folder and type the following code.
9. Run the following command to point the variable to toolchains path :
Code:
export CROSS_COMPILE=/home/r0h4n/android-kernel/aarch64-linux-android-4.9-uber-master/bin/aarch64-linux-android-
If YU followed along with me YU will just have to change the name of the user ( replace <r0h4n> with <YU'r username> )
10. Time to Compile your kernel :
Code:
export ARCH=arm64
Code:
export SUBARCH=arm64
Code:
export USE_CCACHE=1
Code:
make cyanogenmod_tomato-64_defconfig
The name of defconfig file may be different check it in "kernel_source/arch/arm64/defconfig/"
Code:
make menuconfig
Here YU can explore various options. I'll not explain everything in detail here.
Now the final command make. It takes a parameter -jn. Where ( n = # of threads per core + 1 )
I have a Dual core processor with 2 thread per processor so for me it is " make -j3 ".
Code:
make -j3
Now sit back and relax.......let the kernel compile
Got a compilation error ?
Post it here.
Now we need to create a flashable zip. Download this kernel flash zip from here > h t t p s : //drive.google.com/open?id=0B9D4jOdpRzZHdTJibndqQzhVdFk
1. Extract kernel.zip.
2. Navigate to tools in "/kernel".
3. Open "kernel_source/arch/arm64/boot/".
4. Copy "Image".
5. Replace it with the "Image" in "/kernel/tools/Image".
6. Copy "kernel_source/driver/stagging/prima/wlan.ko" and replace it with "kernel/system/lib/modules/wlan.ko".
7. Goto "/kernel" select all the three folders "META-INF", "system", "tools" and rezip it.
8. Flash the zip via recovery and now YU'r Phone rocks YU'r own compile kernel.
Click to expand...
Click to collapse
created kernel using tutorial,,,but this kernel boots in fastboot mode only..
dont know why..
device is lenovo k6 note(sd430 msm8937)
please help
i am facing this error and can not resolve the problem.
property '#gpio-cells' in node /soc/msm_cdc_pinctrl_us_euro_sw or bad phandle (referred from /soc/sound:qcom,cdc-us-eu-gpios[0])
arch/arm64/boot/dts/qcom/msm8953-pmi8937.dtb: Warning (gpios_property): Missing property '#gpio-cells' in node /soc/cdc_comp_pinctrl or bad phandle (referred from /soc/sound:qcom,cdc-comp-gpios[0])
arch/arm64/boot/dts/qcom/msm8953-pmi8937.dtb: Warning (gpios_property): Missing property '#gpio-cells' in node /soc/msm_cdc_pinctrl_pri or bad phandle (referred from /soc/sound:qcom,pri-mi2s-gpios[0])
arch/arm64/boot/dts/qcom/msm8953-pmi8937.dtb: Warning (gpios_property): Missing property '#gpio-cells' in node /soc/msm_cdc_pinctrl_quin or bad phandle (referred from /soc/sound:qcom,quin-mi2s-gpios[0])
arch/arm64/boot/dts/qcom/msm8953-pmi8937.dtb: Warning (gpios_property): Missing property '#gpio-cells' in node /soc/msm_cdc_pinctrl_us_euro_sw or bad phandle (referred from /soc/sound-9335:qcom,cdc-us-eu-gpios[0])
arch/arm64/boot/dts/qcom/msm8953-pmi8937.dtb: Warning (gpios_property): Missing property '#gpio-cells' in node /soc/msm_cdc_pinctrl_quin or bad phandle (referred from /soc/sound-9335:qcom,quin-mi2s-gpios[0])
arch/arm64/boot/dts/qcom/msm8953-pmi8937.dtb: Warning (interrupts_property): interrupts size is (12), expected multiple of 8 in /soc/[email protected]
CC lib/mpi/generic_mpih-lshift.o
DTC arch/arm64/boot/dts/qcom/msm8953-ext-codec-rcm-overlay.dtbo
Error: ../arch/arm64/boot/dts/qcom/msm8953-audio-cdp.dtsi:14.1-11 syntax error
FATAL ERROR: Unable to parse input tree
scripts/Makefile.dtbo:24: recipe for target 'arch/arm64/boot/dts/qcom/msm8953-ext-codec-rcm-overlay.dtbo' failed
make[3]: *** [arch/arm64/boot/dts/qcom/msm8953-ext-codec-rcm-overlay.dtbo] Error 1
../scripts/Makefile.build:653: recipe for target 'arch/arm64/boot/dts/qcom' failed
make[2]: *** [arch/arm64/boot/dts/qcom] Error 2
arch/arm64/Makefile:194: recipe for target 'dtbs' failed
make[1]: *** [dtbs] Error 2
make[1]: *** Waiting for unfinished jobs..