Database Users

[Q] Oppo Find 5 Bricked?

Hello, I recently gotten the WCDMA Oppo Find 5 ( X909) And it came rooted. I flashed OmniRom and the prompt: "Touchscreen Firmware Update in Progress - Please Wait..." and remained for 2 hours. I figured the flashing process screwed up so i tried to enter bootloader and it didnt work. The OPPO logo just shows on the screen and will not boot into recovery or bootloader. Nor can I use fastboot or ADB. As far as i can tell there is no public recovery tool for the Find 5. Any suggestions?

If you could flash the ROM, then a recovery must be available.
Try to keep the power button more than 10 seconds.
This is then a soft reset.
After that you should be able to boot into recovery while holding volume minus an power at the same time.

Help me , Loop infinite

Hello guys, my zenfone 6 's with infinite loop and my fastboot does not work for example I use the volume keys + and Power and can not only get into the recovery mode most is the original recovery mode makes I wanted to install a ROM there but I can not , comes to 54% and already tried with other Original ROM gives Asus Downgrade Please somebody help me !

returndropx said:
Hello guys, my zenfone 6 's with infinite loop and my fastboot does not work for example I use the volume keys + and Power and can not only get into the recovery mode most is the original recovery mode makes I wanted to install a ROM there but I can not , comes to 54% and already tried with other Original ROM gives Asus Downgrade Please somebody help me !
Click to expand...
Click to collapse
http://forum.xda-developers.com/zenfone-5/help/zenfone-5-a500cg-zenfone-6-a600cg-t3354645

Need help

Hi guys,
I want to fix my friend's Redmi 3s. He was trying to update system, but he get bootloop (lol).
I can turn on fastboot mode or even service mode. I was trying to flash system via MiFlash (download mode>flashing) but all the time I got massage in MiFlash "Can not send to COM..." or "Can not read from COM...". Reinstalling drivers etc doesn't help.
+when I'm trying to go to the recovery the screen shows me some picture Redmi + USB cabel, and that's all.
What can I do? Please, help me. Thanks in advance. Peace!

I am assuming you are dealing with MIUI 8. Is the bootloader on your friend's phone locked or unlocked? If it is unlocked, press Volume Up + Power buttons simultaneously then select Download to enter Emergency Download mode. You should be able to flash from there with MiFlash. If the bootloader is locked, you have to use an Engineering or Deep Flash cable like in this guide http://en.miui.com/thread-316728-1-1.html.
Good luck!

What Have I done.... Soft Bricked A7G

Hello All
I have problem with my Axon7 G. I had 8.00 version installed and tried to make a system write option with using a method mentioned in
Official (Beta) Android 8.0.0 V1.30B01 EU Version by NFound thread. I flashed zip mentioned in this tread -ZTE_A7_UniversalBootStack.
Then restart devices and...whats happened....soft (or hard) bricked my phone!!!!!
1. After restart i had a standard warning about unlocked bootloader with yellow fonts . After 5 sec yellow fonts changed into red and wrote my device is corrupt...
2 using vol down i can enter into bootloader mode - then i can choose option like fastboot, recovery,restart and power off.
- pressing recovery and restrt , phone restart and again boot into bootloader mode with option above (cant get into twrp or stock recovery mode)
-pressing fastboot i can enter into this mode .
3 . Use fastboot mode to flash recovery and boot ( fastboot flash recovery recovery.img and fastboot flash boot boot.img)
everything seems ok but...nothing changed , i cant boot into recovery -twrp or stock. Still go back after restart to bootloader menu
4. edl mode.....i can`t enter . Use vol + and vol- and power button then after 3 sec phone went black screen with red light upper left. Applications cant recognize phone in this mode...
somene can help me ???

I also get the warning but I can just continue with the boot. I can't access recovery however. Don't know hot to fix that.

Ok I did this. A7 is working )
I flashed this via fastboot flash file: A2017G_B06_NOUGAT_STOCK_FASTBOOT_EDL.zip then i went into twrp and everything works

Antistar said:
Ok I did this. A7 is working )
I flashed this via fastboot flash file: A2017G_B06_NOUGAT_STOCK_FASTBOOT_EDL.zip then i went into twrp and everything works
Click to expand...
Click to collapse
did you manage to get the error message away?
I got it recently after installing LOS 15.1, but for me everything works fine .
I'm just afraid if the device randomly reboots at night my alarm won't go off in the morning since it's the device is shutting itself down after the 30 second warning.
If you've fixed this can you please detail me through the steps.

[SOLVED] [zui 3.5+] Cannot boot into fastboot / recovery Cannot encrypt

So my friend messed up his zuk z2 plus by flashing zui 4.0 and gave it to me to fix it
On boot it showed encryption unsuccessfull
I tried booting in the recovery and fastboot but it couldn't boot
The device was f**ked up
So i did some research and came across a thread from [email protected] about booting in EDL mode
EDL is emergency download mode
Now to boot into EDL you should power off the device
hold volume up button for 15 second
After 15 second cilck the power button (instant click like you do for going on lock screen 0.5sec) (don't leave volume key)
Now press and hold power button and instantly insert USB cable (insert during device vibrates)
If ( u did it right ){
the zuk logo should blink and disappear and you will be in EDL mode
}else{
your device will boot normally
}
Now you can flash stock rom using mi flash tool
You will need to download qpst version of ROM for flashing
You need to install right drivers for flashing via mi flash tool
I tried using QPST/QFIL but it gave some error
I hope this article helpful
Video will be out soon on : https://youtube.com/rohanparab459